Job Description

• Industry Type: Ship
• Working Location: Boon Lay
• Working Hours: 5.5 days (Alternate Saturday)
• Duration: Permanent Role

Responsibilities

· Responsible for managing the incoming and outgoing orders

· Handle Import/Export permit declarations, custom clearance

· Maintain accurate records of shipping documents as per SOP standards

· Arrange and coordinate import/export shipments

· Coordinate sea/ air freight shipments and transport arrangement

· Liaise with air/sea freight forwarding, shipping lines, transporters to ensure timely delivery of shipment

· Process shipping operation and courier service

· Handling of all billing and invoices

· Ad-hoc duties as and when required

Requirements

· Diploma or equivalent

· With 1 – 3 years of relevant experience

· Proactive and positive working attitude

· Meticulous with good organizational skills

· Proficient in MS Office

· Good interpersonal skills and able to work independently with minimum supervision

n The Contractor shall provide integrated managed network services that encompass Network Administration and Management Services.

n Network equipment shall consist of, but shall not be limited to, hardware, software and firmware of network switches, routers, firewalls, intrusion detection systems (IDS), intrusion prevention systems (IPS), virtual private network (VPN) gateway, content engines, proxy, wireless access points, wireless controllers, hardware load balancer, modems, IP PABX, Uninterruptible Power Supplies (UPS), and server hardware. The phase “network devices” shall be used interchangeably with “network equipment”

n Network infrastructure shall consist of, but shall not be limited to, client and the In-Scope Institutions’ LAN and WAN, wireless network (WLAN), extranet connections, peer-to-peer connections to external agencies, Internet connections and the Demilitarized Zone (DMZ). The network infrastructure shall encompass the network services components including but not limited to, Network Time Protocol (NTP), Domain Name Services (DNS), Active Directory, Dynamic Host Configuration Protocol (DHCP), remote access, VPN and Cisco Secure Access Control Server (ACS). The phase “data network” shall be used interchangeably with “network infrastructure”.

n The Contractor shall perform day-to-day network operation for the network infrastructure and network equipment and the In-Scope Institutions’ premises.

o The Contractor shall setup and operate an online network operation management portal as part of the Network Administration and Management Services for general access and the In-Scope Institutions’ end users at no additional cost to the client and/or the In-Scope Institutions. The information presented in the portal shall be up-to-date and shall include, but shall not be limited to, the following:

• (i) Network diagrams and equipment configuration such as IP addresses, firmware and software version for the network equipment in multiple levels, hierarchical details and categorized by respective In-Scope Institutions.
• (ii) Physical layout and location of the network equipment per each Site.
• (iii) Configuration change history of the network equipment.
• (iv) Cable plant inventory inclusive of labels and tags information.
• (v) UPS inventory inclusive of capacity, usage, support and maintenance details.
• (vi) Online job requests submission and job requests status.

(vii) Incident reports status and workflow for tracking of escalation and resolution

1. Design and Drafting:

- Use computer-aided design (CAD) software to create detailed engineering drawings and plans.

- Assist in the design process for various projects, such as buildings, machinery, or electronic systems.

2. Testing and Quality Control:

- Conduct experiments and tests to evaluate the performance and reliability of products or systems.

- Implement quality control procedures to ensure that products meet industry standards and specifications.

3. Technical Support:

- Provide technical support to engineers or other team members in the development and implementation of projects.

- Troubleshoot and solve technical problems that may arise during the design or manufacturing process.

4. Maintenance and Repair:

- Perform routine maintenance and repair of equipment or systems to ensure proper functionality.

- Diagnose and address issues with machinery or electronic systems.

5. Project Management:

- Assist in project management tasks, such as budgeting, scheduling, and coordinating activities to ensure project goals are met.

- Collaborate with cross-functional teams to achieve project objectives.

6. Installation and Commissioning:

- Participate in the installation and commissioning of new equipment or systems.

- Ensure that installations meet safety and performance standards.

7. Documentation:

- Prepare technical documentation, including manuals, reports, and specifications.

- Maintain accurate records of engineering activities and project progress.

8. Research and Development:

- Contribute to research and development efforts by staying updated on industry trends and incorporating new technologies into

Key accountability (Main purpose of this job):

Reporting to the Head of Technology, this role requires a good mix of technical and business-interfacing skills to scope, implement and manage a range of applications for internal and external customers. The key focus areas of this role will be platform governance, process automation and optimization, integration architecture and database administration.

Responsibilities (Key areas of Responsibilities):

● Oversee the technical evolution of our current IT infrastructure, which includes learning management system, student management system, customer-relationship management system and administrative systems.

● Interface with end-users to understand short and medium term needs.

● Develop software solutions by studying information needs; conferring with users; studying systems flow, data usage and work processes; investigating problem areas; and following the software development lifecycle.

● Determine operational feasibility by evaluating analysis, problem definition, requirements, solution development and proposed solutions.

● Develop optimal solution architectures to ensure technical compatibility and user satisfaction.

● Implement, configure and test feasible solutions.

● Support users on change control and system updates.

● Stay up-to-date with technical and industry developments and standards.

Requirements:

● Bachelor’s Degree in Information Systems, Computer Science, Computer Engineering or IT-related equivalent

● 5-8 years of software development or full-stack web development experience on integrating various SaSS or custom platforms (CRM, LMS, ERP etc) using API or web services

● Strong Hands-on experience with cloud integration platform (Workato, MuleSoft etc) and relational database (MS SQL, MySQL, Oracle, Mongodb, BigQuery etc)

● Hands-on with Programming Languages: HTML5, CSS, Java, PHP, Web Services, JavaScript/JQuery, Bootstrap, Python, typescript, Nodejs

● Strong analytical mindset and solution focused

● Demonstrated experience in effectively managing end-users

● Experience with Google Cloud, Ubuntu, especially Kubernetes, BigQuery, Looker and other data analytics services is a huge plus

● Prior experience working in the education sector and student information systems and LMS will be advantageous

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence and public security segments.

Join our Cybersecurity team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructures, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance.

Collaboration is key to our success. We prioritize open communication, constructive feedback, and a willingness to help others. We are committed to creating a supportive work environment that encourages excellence, innovation, and continuous improvement. We're looking for individuals who share our values and are excited to join us on our cyber mission.

Job Description

• We are looking for a hands-on and meticulous individual who possess knowledge on programming skills and algorithm development.
• Work closely with all the relevant stakeholders to translate the operational requirements into effective and efficient solutions.
• Work as a product development team to collectively manage the product development lifecycle from system design, development testing, and production.

Requirements

• Familiar to at least one of the programming language: .Net, Java, C or C++, C#
• Soft skills – Problem Solving, Communication and Teamwork Skills
• We welcome candidates with no experience but possess strong logical thinking to apply - product-specific and on-job trainings will be provided.
• Work Location: Jurong East

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

You will be part of an IT infrastructure Support Team managing mission critical high-tech biometrics devices at critical locations of significant national interest. You will be trained to manage, troubleshoot and maintain the operational availability of these devices and to remedy faults to prevent operational down-time.

As a IT Support Engineer, you will be responsible for the following :-

• Assist the project teams with setting up, installing, and configuring operating systems, applications, and peripheral devices for PCs/Workstations.
• Provide first level on-site IT support to end-users on a 24x7 rotational shift, including weekends and holidays.
• The successful applicants should be prepared to be deployed primarily at Tuas Checkpoint. The successful applicant could be deployed to Tuas checkpoint in future on a rotational basis.
• Provide findings and timely status update to the Project Manager on major issues escalated by users.
• Perform daily health check and inventory check on system.
• Experience in installing, configuring, and troubleshooting PC/peripheral devices and providing application maintenance support is necessary.
• Hands-on experience in supporting end-users in a Windows (Windows clients) environment is required.

• Having prior exposure to IT operational environments is advantageous.
• A strong Team player with the ability to collaborate and willingness to support one another.
• Communicates well and has good interpersonal skills.
• independent and has ownership of his/her assigned tasks.
• Certification in Nitec, Higher Nitec or Diploma, ideally with a focus/specialization in IT.
• Have keen interest in IT Service Management
• Willing to work on rotations.

In the course of your tenure as IT Support Engineer, you will learn and acquire the following:

• Experience in installation, configuration, troubleshooting of biometrics devices as well as the maintenance of related software applications.
• Hands-on experience in supporting high-tech devices in Windows (Windows clients) environment/platform.
• Understanding of IT Service Management where SLAs (service-level agreements), KPIs (key-performance indicators) need to be managed and adhered to.
• Familiarity with the fundamental scope of work typically delivered in IT Support Services.
• Ability to work under time-sensitive situations.
• Career progression to Lead a team in providing IT Support Services.

We are a Singaporean SME located in Jurong area, manufacturer and agent for Weighing and Weighing Related Equipment, Electronic Measurement & Control Devices, Powder Processing Equipment and Systems, and Packaging Equipment. The foundation of our continued success over the past 69 years is a dedicated and professional team that strives relentlessly to overcome all challenges.

You will be part of the Engineering team to perform machinery design, supervising and handling of fabrication with sub-fabricators and suppliers, machinery installation, test and commissioning.

THE ROLE:

1. Conduct all aspects of project engineering activities include attendance to technical meeting and discussion with client, and occasional overseas travel to support our regional market.

2. Comprehend and produce mechanical design and shop drawings.

3. Design automated machine includes material handling, material feeding system, material pick and place system, jigs and fixtures. This role also involves steel structure design, process piping design, static equipment like tanks and vessel design.

4. Candidate with prior experiences shall design and build customized solutions, perform equipment integration and participate in the role of project management.

5. Candidate shall be exposed to project cost management, plan work schedule, supervise and control contractors to carry out their works accurately and timely in accordance to the contract drawings, specifications and approved QA/ QC checklists.

THE PERSON:

* Degree/ Diploma in Mechanical, Mechatronics Engineering or its equivalent.

* Work experience in related field of Solids Bulk Handling and Packaging Machines

* Fresh graduates are welcome to apply

* Possess good communication and facilitation skills.

* Valid Class 3 driving license in Singapore as added advantage.

* Hands-on, practical and independent person who is able to travel

JOB DUTIES:

Fu Yu Corporation Ltd is looking for an independent and high motivated Additive Manufacturing Engineer to join the Additive Manufacturing Team in Singapore.

Successful candidate is expected to contribute to research & development activities for new product development and production scale up of 3D printed products where he/she will be carrying out the following work scopes but not limited to:

• Design, prototype and validation of product designs
• Review functional and printability of 3D models based on necessary specifications and requirements for each project.
• Carry out operations on selected 3D printing machines for new product development which includes material printability, process optimization and post processing
• Identify new opportunities for adopting 3D printing technologies in existing manufacturing process.
• Documentation of work procedures and data according to ISO standards requirements
• Maintain and upkeep of AM lab according to HSE standards and is responsible for equipment scheduling and maintenance.

EXPERIENCE REQUIRED:

• Minimum diploma in Mechanical, Engineering, Industrial Design or any relevant discipline
• Exceptionally motivated with a strong desire to learn and grow in the additive manufacturing field
• Experience in additive manufacturing technologies
• Strong teamwork and ability to manage cross-functional and divisional relationships
• Knowledge in Product Design & Development will be advantageous
• Familiar with CAD (computer aided design) software will be advantageous
• Experience with machining manufacturing environment will be advantageous
• Fresh graduates are welcomed to apply!

Job Description

• Production management in assembly factory for industrial wastewater treatment unit

• Supervise the overall assembly line and monitor the production progress

• Understanding the inventory situation, procurement of parts

• Coordination with parts warehouser and shipment forwarder

• Quality control

• Tools and equipment management

• Continuous improvement of production processes

Job Requirements

• At least 3 years of work experience in assembly factory

• Practical experience in Kaizen activity

• High communication ability for internal team and customer

• Good in spoken and written English

• Business attitude to provide reports, to keep the lines of communication open, and to ask for guidance or advice.

• Leadership skills

• Proficient in Microsoft office and IT

• Knowledge of Toyota production system will be an added advantage.

• Electrical knowledge of control panel / programmable logical controller

• If found suitable, the candidate may be eligible for supervisory roles

The Renaissance Engineering Programme (REP) is one of the key programmes under the NTU Premier Scholars Programmes (PSP) to nurture students as future leaders of industry. It is a broad-based, inter-disciplinary programme which integrates engineering, science, business, technology management and humanities and prepares students to be future-ready. Other than studying locally, students have the opportunity to spend the third year overseas at one of the renowned partner universities, with professional attachment.

The Senior Executive’s primary role is to provide administrative and operational support for the undergraduate academic and examination matters under the REP. The position will play a pivotal role in providing general administrative support for overseas exchange to students, annual admission exercise and alumni. In addition, the position will support the digital media activities, outreach, student engagement, publicity and accreditation matters.

• Provide administrative support for examination matters including supporting the Board of Examiners meeting, examination timetabling and post examination analysis
• Provide administrative support for the Overseas Exchange Programme such as pre-departure administrative matters, course mapping, post exchange credit transfer and professional attachment matters
• Develop a digital media strategy for the programme and provide support for student and alumni engagement activities, outreach events and publicity matters
• Provide administrative support for annual admissions exercise and accreditation exercise

Requirements:

• Recognised Degree in any discipline
• At least 3 years of relevant working experience preferably in a tertiary institution
• Prior experience in programme management and operations in an institute of higher learning would be an advantage
• Good knowledge of IT skills in Microsoft applications
• Strong analytical thinking and communication skills, both written and verbal
• Good interpersonal skills with a genuine interest in interacting with students
• Strong in contents management and marketing for social media and website
• Good organisational skills and able to attend to details

The Sales Support Administrator is responsible for providing administrative and documentation support to the Sales Team to win orders.

Duties & Responsibilities:

• Provide administrative and documentation support to the Sales Team
• Work with Sales Team on preparation of Quotes
• Review customer requirements with Sales Team to ensure accurate sourcing of quotes from vendors/suppliers
• Liaise with vendors/suppliers to obtain best prices and lead-time in a timely manner
• Generate weekly and monthly reports for the Sales Team
• Track inbound enquiries and monitoring their progress

Qualifications:

• Candidate should ideally possess a Diploma
• Good communication and interpersonal skills.
• Self-driven individual with a positive learning attitude.
• Basic knowledge in ERP systems is a plus
• Candidates with no experience are also welcome to apply. On the job training will be provided.

DREX-CHEM TECHNOLOGIES PTE LTD

The DREX-CHEM GROUP is a successful leader in the distribution of specialty chemicals, resins, pigments, printing consumables & equipment etc in ASEAN and Hong Kong/China. We have immediate vacancies for :

Customer Service Representative (Admin)

(Ability to Work in TUAS of Singapore Should Only Apply!)

Responsibilities :

· Responsible for processing customers' orders,

. Managing inventory and perform purchasing functions with shipment follow up;

. Communicate and coordinate effectively with internal departments;

Requirements:

• GCE ‘O’ or ‘N’ level or qualifications with credit in English and relevant experience are welcome.
• At least 3 years' experience in Customer Service;
• Some knowledge of import and export handling;
• Some inventory control knowledge;
• With Microsoft Excel intermediate level;
• Stay in Singapore;
• Able to start work within short notice or immediately.

· Training will be provided

· Adaptable, independent with pleasant personality and a team player;

· Able to interact with all levels of people;

· 5-day week with transportation provided from Joon Koon MRT Station.

. Applicants who are able to work in TUAS should only apply.

The Company offers excellent career advancement program with attractive remuneration packages for performers. Interested applicants are invited to apply or email before 8 February 2024 with full resume, current and expected remuneration details and a photograph to:

Drex-Chem Technologies Pte Ltd

1 Tuas, Avenue 16.

Singapore 638924.

Attn : HR Manager

Or email to : [email protected]

Job Description:-

* Preparing, scheduling, coordinating and monitoring the assigned engineering projects

* Perform overall quality control of the work (budget, schedule, plans, personnel’s performance) and report regularly on project status

* Cooperate and communicate effectively with project manager and other project participants to provide assistance and technical support

* Assign responsibilities and mentor project team

Requirements:-

* Excellent knowledge of design and visualisations software such as AutoCAD

* Familiarity with rules, regulations, best practices and performance standards

* Project management and supervision skill

* Time management and organization skills

* diploma/degree in Engineering or relevant field

Job Description & Requirements

ASNT NDT Level III, PCN NDT Level III, Advanced NDT Specialist

Familiarisation of ASME & API Codes & Standards

Ability to assume full technical responsibility for clients’ NDT facilities.

Proven experience of providing solutions to clients’ NDT inspection related problems.

Maintain all of equipment and consumable storage in the store room to be ready for using with good conditions under acceptance criteria specific by client or international standard.

Willingness to be flexible and multi-task as part of a team, and contribute to company objectives.

Strongly motivated to achieve results, with a high degree of professionalism, honesty and integrity.

Excellent organizational and time management skills, able to priorities workloads with competing deadlines.

Good written skills to produce coursework and training materials, as well as clients’ NDT procedures, written practices, techniques and audit reports.

Provide internal trainiand technical guidance for other inspectors

Ensure that all personal certification is kept up to date.

Develop and approve NDT procedures, written practices and NDT techniques to a high standard that comply with clients

Creative skills to plan and deliver lessons in a professional, positive and engaging manner.

Ensure adequate training and cross checking the site works, share knowledgewith team members and contribute to team development.

To analyse work plans and projects, and as well as recommendations of every working unit; and to give advice on safety measures to the employer.

Feedback on revised Equipment’s and software’s for improvement.

Feedback after testing the new equipment on site for improvement.

Extensive knowledge of own subject area with extensive industrial NDT experience holding multiple NDT method Level III certification ASNT (RT,PT,UT,MT,VT,ET) /CSWIP (PAUT/TOFD)

Preferable:

Master's degree in NDT

Bachelor degree in Mechanical Engineering

Job Description & Requirements

1. We need PM service engineers who have an engineering background and experience.

2. PM service, Bead Blast, General Work

3. Report to supervisor as per the instruction of the supervisor

4. Support other teamwork together.

Job Types: Night Swift, Full time, Permanent

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

1. Performed on site (Cleanroom) repairing, installation and maintenance of automation equipment and machinery which include mechanical, electrical, etc

2. Work with customers to diagnose technical problem, determine the solution and assist customer in implementing the fix.

3. To liaise with customers on unresolved technical problems, and ensure proper record are maintained

4. Perform stand-by duty

Job Responsibilities:

• Attend to sales enquiries, quotations and responding to customer enquiries.
• Manage RFQ, review quote package, generate accurate and detailed quote summary for review.
• Liaise with purchasers on cost involving on the sales enquiries or quotations.
• Follow up with customers regarding quotations.
• Collaborate with internal resources to identify the make/buy logic for the bill of materials.
• Apply work knowledge to improve quote formats and output efficiency.
• Others ad-hoc duties may be assigned.

Requirements:

• Nitec/Higher Nitec or Diploma in Mechanical/Precision Engineering.
• Proficient in Microsoft Excel.
• Familiarity or experience on CNC machining or precision engineering environment preferred.
• Well verse in Microsoft Office.
• Able to interpret mechanical/technical drawings, bill of materials, specifications and Geometric dimensioning and tolerancing (GD&T).
• Familiar with CNC metal machining process like turning and milling etc.
• Pleasant personality and able to communicate well with customers for their request.
• Meticulous, excellent with details.
• Knowledge of SAP is an advantage.

• Responsible for the defect management of the sorting system to ensure timely discovery, data entry and various defects
• Daily checking the operation status of the sorting system equipment from time to time
• Responsible for the inspections and monitoring of mechanical sorting and maintenance
• Issue work permit and work arrangement for worker
• Others duties as assign by management

Job Requirements

• A team player
• Independent and possess sound analytical and communication skills
• 2 Years of relevant experience
• Diploma and above
• Experience in Power Plant industry is an advantage
• Working Location: Tuas South Avenue 2

Job Descriptions:

· Responsible for full set of accounts (AP, AR, GL)

· Perform accurate data entry to the computerized accounting system

· Process suppliers’ payments, verify documents (invoices / DO) are in order, prepare payment voucher, issue cheque and TT transactions.

· Follow up on Customers’ outstanding

· Reconciliation of balance sheet accounts, including creditors/suppliers, inter-company transactions and bank.

· Month-end accounts closing and reporting to HQ

· Monthly Payroll and CPF Submission (including staff claims)

· Quarterly GST submission

· Yearly AIS submission, ECI filing, assist tax agent on corporate tax filing, support external auditor during annual audit process.

· Assist with the preparation of the annual budget and forecasts

· Ensure compliance with relevant accounting standards and regulations

· Handle human resource functions i.e.: recruitment and on-boarding, apply/renewal of work pass

· Any ad-hoc duties as assigned by Management

Job Requirements:

· Min Diploma and above in Accounting or equivalent

· At least 2 years of relevant experience in handling full sets of accounts

· Proficient in Microsoft Excel, MYOB

· Mature and able to work under pressure and tight deadlines with minimal supervision

· Good working attitude, positive and responsible

· Ability to deal with sensitive information with discretion and to always maintain confidentiality

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Responsibilities:-

• Analyses drawings & determine physical characteristics of products, special handling, requirements and type of packaging and crating required.
• Required to effectively manage multiple projects with minimal assistance & supervision.
• To identify and implement packaging improvement.
• To support on-site packing when required.
• To do any other ad-hoc duties assigned

Requirements:-

• Able to manage multiple projects in a fast-paced environment with strong project management skills
• Candidates with at least NITEC engineering background or equivalent.
• Candidates with packaging / crating work experiences will be preferred.

Job Info:

• Salary: Basic from $3500 - $4500 +VB
• Working Hour: Monday - Frida y (8:30am - 6pm)
• Location: Clementin MRT (Company transport provide one way)

Job Scope:

1. Business Analysis

• Understand business requirements or problem statements to develop business applications to drive value
• Liaise with end-users to identify any efficiencies, bottlenecks, and areas for workflow and work process improvements
• Translate end-user's adhoc business requests into technical requirements

2. Microsoft 365 Apps Implementation

• Provide expertise and guidance to end-users on the potential use of Microsoft 365 apps to improve work efficiency
• Convert manual processes/workflows to automation by designing and developing applications using the Microsoft Power Platform, including Power Apps, MS Flows/Power Automate, Power BI, etc.
• Communicate and work with multiple stakeholders and vendors to plan schedules for development and implementation of business applications
• Perform end-to-end testing, troubleshooting and end-user support
• Maintain and update applications developed as well as create and maintain documentation in the form of user guides for knowledge retention
• Conduct technical trainings and support for improvement of staff's skills in Microsoft 365 tools and other systems

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

RESPONSIBILITIES

• Perform the designs using in-house adsorption tools.
• Prepare the simulation files for SRU/TGU catalyst using Hysys.
• Prepare the simulation files for HPC using in-house tool.
• Prepare the technical proposal to meet the customers’ RFQ requirements.
• Provide on-site service for catalyst and adsorbent loading and start-up
• Support business manager on technical inquires.
• Resolve technical issues quickly and effectively at customer site or remotely.
• Develop technical services plan and execute the plan to meet customer expectation and demand.
• Carry out on-site excellent technical services and adhere to best practices standard.
• Prepare the Technical Service Visit Report
• Prepare various technical reports and presentations (internal and customer) and assures consistent communications.
• Work with other functions to develop value-added services relative to technical services

REQUIREMENTS

• Bachelor’s Degree in chemical engineering or Chemistry
• Minimum 3 years of experience in related industrials e.g. Oil refining and Petrochemical
• Comprehensive knowledge of Chemical Engineering
• Comprehensive knowledge of refining and petrochemical plant
• In-depth Microsoft Excel and Power Point skills

• Reports to the Construction Manager
• To ensure that day to day viaducts erection activities/operations are monitored at an appropriate level
• Plan, organize, supervise, and liaise closely with sub-contractors and operation teams on all ongoing viaduct erection activities
• Perform routine on-site checks and inspections to ensure compliance with authorities’ requirements.
• Liaise with various stakeholders on the safety aspect of any viaduct erection operations
• Generate reports to construction team regularly
• Liaise closely with WSH team to ensure operations comply with safety standards

Job Requirements:

• Diploma / Degree in Civil Engineering or equivalent
• Minimum of 8 years of relevant experience in the construction industry; inclusive of 5 years experience in construction and supervision for vehicular structures and road projects (Road / LRT / MRT / Viaduct) is mandatory
• Technically expert and highly knowledgeable in the erection of viaduct segments is essential for this position
• Location : Woodlands
• Project : Viaducts