Job Description:

• Assist in coordinating, scheduling, planning, and supervising purchases, production, and site management.
• Lead, monitor, review & implement project scheduling, purchasing, installation, commissioning, and operation of equipment/machinery to ensure that all objectives of safety, completion time, technical aspects, and profitability are met.
• Preparation of project documents and engineering drawings
• Work with Engineering Team to handle project/engineering document/drawings and ensure proper tracking and distribution.
• Liaise with vendors/subcontractors on equipment/material submission approval, delivery & receipt of goods, and commissioning of equipment.
• Identify and resolve technical problems and ensure that the expenditure of the projects is kept within budgeted costs and completed within the schedule.
• Ensure purchasing activities, e.g. sourcing, evaluation, and recommendations for purchase, are carried out in a timely and accurate manner.
• Liaise with main contractors/subcontractor/site engineers regarding on-site requirements and progress
• Manage and arrange site works with sub-contractors, check, monitor, and evaluate their progress.
• Attend site meetings with the owner, consultants, and main contractors on all matters relating to project operation and coordination
• Conduct site surveys before delivery and involve in site commissioning works.
• Supervise site works and conduct periodic safety inspections and attend WSH meeting

Job requirements:

• Min Diploma in Electrical/Mechanical Engineering
• Min 3 Years of working experience in a similar industry
• Strong communication skills, both written and spoken
• Has good document control & administrative skills.
• Good working knowledge of MS Office
• Ability to work independently as well as in a team environment
• Ability to read General arrangement drawings, Layout drawings, shop drawings, electrical single line diagrams, Gantt charts, etc
• Ability to work under pressure of meeting timelines
• Ability to identify potential or actual causes of delay and take preventive/ remedial actions
• Self-motivated and results-oriented
• Building Construction Safety Supervisor Course (BCSS) certificate is highly preferred.

Fresh graduate is also considered for a junior position.

Responsibilities:

• Perform technical solutions in medium or large size engineering in centrifugal inline pump products and packages (like fire water pumps packages in line with NFPA 20 standard guideline).
• Create engineering drawings and specifications for components, products and mechanical designs working with internal and external customers through the development and approval process.
• Maintain quality and accuracy of product master data in ERP system as per latest updates required by sales, purchasing, production and aftermarket.
• Provide technical support to customer solution engineering, product improvement within Engineering and to other stakeholders.
• Develop, maintain product data books, instruction and operation manuals.
• Work with Operations, Marketing, Purchasing, Production, Sales, executive management, and others to develop winning solutions.
• Coordinate with and consult with other team members to design or detail components.
• Proactive technical communication, execution with suppliers, customers, and internal stakeholders during end-to-end project execution.
• Identify, mitigate, monitor and report risks in own responsibility area.
• Work proactively to promote teamwork at all levels of the company.
• Other tasks and special projects as assigned.

Education & Qualification:

• Bachelor’s Degree in Mechanical Engineering AND 5+ years of experience in product development (preferably in pump products and systems in marine applications such as package engineering, hydraulic power packs and diesel engine driven systems).
• Experience with mechanical designs involving rotative equipment, steel structures, piping required.
• Ability to use AutoCAD, 3D CAD required, good understanding of CAD & GD&T standards.
• Good knowledge on sustaining engineering and ability to use enterprise software.
• Basic understanding centrifugal pumps and pumping systems.
• Efficient using Microsoft Office (Word, Excel, Outlook, PowerPoint, etc.) and the internet.

Responsibilities:

• Sourcing quotation from mould supplier for new project & ensure the moulds delivery schedule is met.
• Preparation of casting schedule to sub-contractors and ensuring precast components are cast on time for delivery.
• Coordinate with the project coordinator for the delivery of cast in item provide by main-con i.e. M&E, door frame, Ventilator sleeves, window frame etc
• Update daily production report on wall charts.
• Ordering of raw materials (BRC, Rebars, inserts, lifting hooks & nuts etc.) including cast in item (pipe, access cover) & ensure the materials are delivered on time for production.
• Submission of weekly/monthly production reports including each project completion percentage updating daily production volume.
• Checking of monthly Finished Goods Inventory (FGI) report against the production monthly report

Requirement:

• Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Engineering (Civil) or equivalent.
• At least 1 Year(s) of working experience in the related field is required for this position.
• Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.
• Study plan number of moulds required for each project of the components for individuals project. Ensure that moulds ordered are delivered on time.

Primary Responsibilities:

• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• Ensure that standard practices are utilised wherever possible.
• Provide estimates and feedback for proposals department.
• The candidate shall undertake outline and detailed designs and specifications for electrical, instrumentation and control works.
• The candidate shall provide day-to-day technical input as part of a team of engineers.
• The candidate shall ensure that the design output is completed in accordance with the agreed scope of work, timescales, and budgets.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• The candidate shall monitor the installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have good knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices.
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall work to the procedures and processes to ensure the continuing development of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The Candidate shall have about 3 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

- Electronics & Electrical Engineering background

- Strong analytical skills, including the ability to find creative solutions and can work independently

- Experience with developing prototypes and conducting tests to validate designs

- Knowledgeable in IoT Systems, including embedded systems such as microcontrollers, graphical user interface(UI), sensors etc

- Proficient in programming languages such as Embedded C, C++, Python, Arduino, Xilinx and Vivado etc. or equivalent

- Knowledgeable in Circuit Design and PCB Design software such as Altium, Easy EDA, etc. or equivalent

• Review and interpret construction drawings, method statements, and risk assessment forms for job and tender submissions.
• Serve as the main liaison between the site office and headquarters to facilitate the integration of e-invoicing systems.
• Coordinate with various departments to ensure seamless communication and workflow.
• Assist in promotional and marketing initiatives to revamp the company's corporate website.
• Ensure compliance with all relevant regulations and industry standards.
• Maintain accurate records and documentation of all site activities and communications.
• Strong understanding of construction drawings, method statements, and risk assessments.
• Experience with integrating e-invoicing systems is preferred.
• Background in promotional or marketing activities.
• Excellent communication and interpersonal skills.
• Proficient in Microsoft Office Suite and relevant industry software eg. Asurix.
• Ability to work independently and collaboratively within a team.
• Strong organizational skills and attention to detail.

Responsibilities:

• Coordinating and leading design consultants.
• Supervising design consultants and design engineers.
• Reviewing outcomes of design consultants.
• Assessing the risk of geological hazards and ensuring any factors affecting engineering works are identified and managed.
• Preparing reports for management to check design progress and identify risks.

Requirements:

• Minimum of 10 years of geotechnical engineering experience.
• With a Bachelor degree in Civil Engineering recognized by the PE Board, or a qualification acceptable to the Commissioner of Building Control as eligible for application as a Resident Engineer. Alternatively, a recognized degree in the relevant field subject to the acceptance of the Engineer.
• More than 5 years of experience in Design and working on LTA projects.

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 3 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Job Description

• Interpret contract specifications, architectural standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manage budgets; write reports; and carry out additional administrative duties associated with the projects that are allocated
• Oversee architectural planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise and prepare construction and architectural documents and drawings
• Oversee architectural projects, communicate with clients and subcontractors regarding architectural issues, and guarantee the highest levels of architectural workmanship
• Provide the architectural designers with technical guidance on building requirements
• Organize and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in engineering
• Min 3 years of construction experience

The Mercedes-Benz AG Group CISO heads Mercedes-Benz’s Global Cyber Security Department (based in Stuttgart, Germany). We are looking for a Cyber Security SIEM Use-Case Engineer to join our Cyber Intelligence and Response Centre (CIRC). This role is crucial for the engineering, development, and continuous improvement of threat detection use-cases within our SIEM . You will also be involved in the engineering and development of custom rules to detect potential threats swiftly and creating transparency to map existing detection capabilities to the MITRE ATT&CK framework.

Key Responsibilities:

• Proactively create, test, and tune new detection use-cases in the SIEM
• Review and enhance existing detection use-cases using Machine Learning or User & Entity Behaviour Analytics (UEBA).
• Map detection use-cases to the MITRE ATT&CK framework to assess SIEM monitoring coverage.
• Perform regularly updates to threat detection engineering playbooks, processes, and documentation.
• Collaborate closely with the SOC to challenge and improve detection and prevention capabilities.
• Identify and implement SIEM use-cases to address blind spots.
• Coordinate with the log onboarding team and SIEM architect to validate new log sources for compliance and improve SIEM backend performance.
• Collaboration with Service Operations team to address challenges, process fulfillment, documentations, and improvement of Service Operations Quality.
• Provide governance on topic which related to operational stability.

Join us to play a pivotal role in enhancing our cyber security measures and protecting our global operations.

QUALIFICATIONS

Specific Knowledge

• Intense knowledge in using Splunk Enterprise Security (ES)
• Intense knowledge in developing and tuning detection use-cases (Correlation Searches) in Splunk based on Data Models
• Experience in Machine Learning and Risk Based Monitoring in Splunk is an advantage
• Ability to analyse and interpret security logs and events to identify potential threats and attack patterns
• Experience in validating data source compliant using the common interface model (CIM)
• Experience of setting up and utilize data models in Splunk
• Deep understanding of cyber security concepts to create detection use-cases targeting various phases of attack lifecycle
• Understanding of MITRE ATT&CK framework and detections of various tactics and techniques
• Experience and capable of creating interactive dashboards, alerts, reports in Splunk

Experience

• Degree from a reputable university or significant course work in Computer Science, Networking, engineering or other computer-related fields of study.
• At least 3 years of experience with demonstrable skillsets in SIEM use-case engineering, with over 5 years of experience
  in cybersecurity
• Previous relevant experience working in a security operational role, ideally within a Corporate, Military, or Police environment; engaging with and responding to a diverse array of internal stakeholders, including senior management
• Have good emotional intelligence and is a proven team player
• Rational and calm under pressure
• Fluency in the English language
• Effective oral and written communication skills
• Good timekeeping ability to cope with a tight deadline and achieve operational objectives
• Self-motivated with the ability to carry out assigned tasks with minimum supervision

This position is based in location Singapore. A valid and approved work visa is required for employment in Singapore in accordance to local labour law regulations. We regret to inform you that only shortlisted candidates will be notified.

• Primarily responsible for solving technical business solution needs of partner and/or end user by providing presales support
• Develop working proficiency and obtain certifications on assigned products and technologies through self-directed and formal training
• Responsible for conducting hands-on POC independently
• Independently present vendor’s solution to partners and end-users
• Provide updates and trainings to partners and end-users when required
• Collaborate, work closely and support product managers and channel account managers, in bringing opportunities to closure
• Provide timely and accurate reporting

Requirements:

• Degree / Diploma in IT / Computer Studies or equivalent
• Minimum 2 years of hands-on experience in IT network and Cybersecurity domain
• Strong knowledge of security and networking infrastructure environment
• Process good analytical, communication, interpersonal and personal skill
• Good attitude with willingness to learn
• Demonstrate high level of independence

Yee Jie Ling Jaslin | EA Reg. no.: R1440114

RS Recruitment Agency LLP | EA Licence no.: 17C8809

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 5 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Documentation Management:

· Create and maintain project files, documents, and records.

· Organize and categorize project-related materials for easy access.

· Ensure that project documentation is up-to-date and accurate.

Scheduling and Planning:

· Assist in creating project schedules and timelines.

· Coordinate meetings, appointments, and project-related events.

· Coordinate and liaise with clients and any other government authorities and agencies for applications, submissions, and work arrangements.

· Pre-condition and post-work surveys to document site conditions for project records and closing out of authorities’ applications.

· Joint inspection and measurement with the client for project claim submission.

· Quantity surveying for preparation of sub-contractor contracts.

· Monitor project progress and deadlines.

Efficiency Management and Documentation:

· Assisting the project manager in ensuring efficiency and datelines are met.

· Coordinating between team members to ensure files are up to date and shared commonly.

Communication:

· Act as a point of contact between project team members, stakeholders, and external partners.

· Distribute project-related information and updates to relevant parties.

· Assist in preparing and distributing project reports, presentations, and meeting minutes.

Budget and Financial Support:

· Assist in tracking project budgets and expenses.

· Help with financial documentation and reporting.

Quality Assurance:

· Assist in ensuring that project deliverables meet quality standards.

· Maintain records related to quality control, testing, and batch installation.

Team Support:

· Provide administrative support to project team members as needed.

· Facilitate team meetings and communication.

Reporting:

· Generate and distribute regular project status reports.

· Compile data and metrics for project performance analysis.

Requirements

• NITEC or Diploma in Business, Quantitative Survey, Project Management, Engineering or any relevant fields of study.
• No prior experience required.
• Good command of written and oral English.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.

5.25 days' work week, alternate Saturday (half day).

8.30am to 6pm.

RF Unit

• Disassemble RF unit and Calibrate the unit according to SOP
• Troubleshooting and repair of PCB assemblies
• Soldering work and board rework on HD, surface-mount PCB assemblies
• Provide necessary fault information and repair records for work carried out
• Knowledge of handling different test and measuring equipment, LCR meter and Network Analyzer
• Complete repair job in a timely manner
• Maintain SOP documents required for daily repair/rework operation
• Knowledge of Smith Chart

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 3 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be advantageous.
• Ability to rationalise designs and produce economic plant layouts.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Documentation Management:

· Create and maintain project files, documents, and records.

· Organize and categorize project-related materials for easy access.

· Ensure that project documentation is up-to-date and accurate.

Scheduling and Planning:

· Assist in creating project schedules and timelines.

· Coordinate meetings, appointments, and project-related events.

· Coordinate and liaise with clients and any other government authorities and agencies for applications, submissions, and work arrangements.

· Pre-condition and post-work surveys to document site conditions for project records and closing out of authorities’ applications.

· Joint inspection and measurement with the client for project claim submission.

· Quantity surveying for preparation of sub-contractor contracts.

· Monitor project progress and deadlines.

Efficiency Management and Documentation:

· Assisting the project manager in ensuring efficiency and datelines are met.

· Coordinating between team members to ensure files are up to date and shared commonly.

Communication:

· Act as a point of contact between project team members, stakeholders, and external partners.

· Distribute project-related information and updates to relevant parties.

· Assist in preparing and distributing project reports, presentations, and meeting minutes.

Budget and Financial Support:

· Assist in tracking project budgets and expenses.

· Help with financial documentation and reporting.

Quality Assurance:

· Assist in ensuring that project deliverables meet quality standards.

· Maintain records related to quality control, testing, and batch installation.

Team Support:

· Provide administrative support to project team members as needed.

· Facilitate team meetings and communication.

Reporting:

· Generate and distribute regular project status reports.

· Compile data and metrics for project performance analysis.

Requirements

• NITEC or Diploma in Business, Quantitative Survey, Project Management, Engineering or any relevant fields of study.
• No prior experience required.
• Good command of written and oral English.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.

5.25 days' work week, alternate Saturday (half day).

8.30am to 6pm.

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively. The term ‘cost’ is to embrace all costs associated with the design and the subsequent construction of the design. To be cost-effective, the whole outturn cost of the design solution must be considered, including design time costs, material costs, erection costs and any impact that the design solution might have on other disciplines.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• Monitor installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have experience in leading design delivery, including multidisciplinary design.
• The candidate shall have Excellent knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall maintain files and records throughout the duration of contracts.
• The candidate shall assist in supervising and developing staff.
• The candidate shall assist in ensuring a safe working environment for all staff.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The candidate shall have at least 8 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience in monitoring members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• A flexible mind, with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• Ensure that standard practices are utilised wherever possible.
• Provide estimates and feedback for proposals department.
• The candidate shall undertake outline and detailed designs and specifications for electrical, instrumentation and control works.
• The candidate shall provide day-to-day technical input as part of a team of engineers.
• The candidate shall ensure that the design output is completed in accordance with the agreed scope of work, timescales, and budgets.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• The candidate shall monitor the installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have good knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices.
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall work to the procedures and processes to ensure the continuing development of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The Candidate shall have about 5 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Documentation Management:

· Create and maintain project files, documents, and records.

· Organize and categorize project-related materials for easy access.

· Ensure that project documentation is up-to-date and accurate.

Scheduling and Planning:

· Assist in creating project schedules and timelines.

· Coordinate meetings, appointments, and project-related events.

· Coordinate and liaise with clients and any other government authorities and agencies for applications, submissions, and work arrangements.

· Pre-condition and post-work surveys to document site conditions for project records and closing out of authorities’ applications.

· Joint inspection and measurement with the client for project claim submission.

· Quantity surveying for preparation of sub-contractor contracts.

· Monitor project progress and deadlines.

Efficiency Management and Documentation:

· Assisting the project manager in ensuring efficiency and datelines are met.

· Coordinating between team members to ensure files are up to date and shared commonly.

Communication:

· Act as a point of contact between project team members, stakeholders, and external partners.

· Distribute project-related information and updates to relevant parties.

· Assist in preparing and distributing project reports, presentations, and meeting minutes.

Budget and Financial Support:

· Assist in tracking project budgets and expenses.

· Help with financial documentation and reporting.

Quality Assurance:

· Assist in ensuring that project deliverables meet quality standards.

· Maintain records related to quality control, testing, and batch installation.

Team Support:

· Provide administrative support to project team members as needed.

· Facilitate team meetings and communication.

Reporting:

· Generate and distribute regular project status reports.

· Compile data and metrics for project performance analysis.

Requirements

• NITEC or Diploma in Business, Quantitative Survey, Project Management, Engineering or any relevant fields of study.
• No prior experience required.
• Good command of written and oral English.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.

5.25 days' work week, alternate Saturday (half day).

8.30am to 6pm.

Responsibilities:

• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall produce and review all design deliverables, including design specifications, schedules, drawings, and calculations, and have a comprehensive knowledge of CAD and BIM design.
• The candidate shall review clients' or third-party designs and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall challenge client asset standards where a clear opportunity exists to use an alternative, cost-effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX
• Preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The candidate shall have about 8 years of experience in mechanical design works, preferably with contractor experience in water and wastewater industry
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be advantageous, by reviewing pump calculations, hydraulic calculations, P&IDs, Process Flow Diagrams and technical specifications
• General experience in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Overview / Responsibilities

The Facilities Cost Benchmark is responsible for developing a comprehensive construction cost and management to achieve long-term Micron goals.

The role will be managing and supporting Micron construction projects cost from planning through closeout, including scoping, pre-planning, design, construction administration, Facilities budget cost benchmark management with different Micron site.

Responsibility includes budget cost managing & improving of new project planning business process. Gathering, analyzing & benchmarking Micron current manufacturing sites & construction projects, providing accurate & timely information to project evaluation team. Facilities Cost Benchmark also has another important responsibility is to evaluate the global semiconductor factory construction cost comparison.

Responsibilities

• Manage and lead new construction project cost process.
• Establishing project objectives, scope and deliverables in collaboration with stakeholders and ensuring alignment with requirements.
• Prepare new project Cost & schedule report & long-term plan reports for management review.
• Developing and managing initial project schedules, budgets and resource allocations to ensure cost efficiency and timely delivery.
• Maintain effective communication with project team members and relative stakeholders to provide project updates, address concerns and foster strong working relationships.
• Ensure Roles, Responsibilities and Accountabilities are fully understood by the participated teams
• Collect, classify, evaluate data and information used in supporting the new Micron construction project planning evaluation request.
• To evaluate the global semiconductor factory construction cost comparison.

Skills / Qualifications

Minimum Qualifications:

• The candidate should possess a BSc or Beng in Engineering from a recognized institute of higher learning.
• Experience in Master planning & project planning is thus highly valued.
• Candidates with experience in facilities operation & construction.
• Minimum 5 years of budget and cost management experience.
• Good analytical skills with problem solving aptitude.
• Skills in excel and simple code writing desired.
• Ability to integrate and work in a global multicultural team
• Great leadership, interpersonal skills and team building spirit.
• Excellent communication skills, both written and verbal.

Minimum Experience & Skills:

• Candidates with experience in Fab or facilities construction and operations.
• Demonstrable experience in the construction or semiconductor project cost management and/or other relevant industries is strongly preferred.
• Strong financial understanding and experience in project budgeting and cost control.
• Strong communication skills, as well as the ability to visualize issues and communicate them to others.
• Outstanding organization, coordination and leadership skills – ability to coordinate and motivate TMs from multiple sites and different background.
• Ability to work collaboratively and pro-actively in a team environment.
• Moderate skill in excel and simple code writing desired.
• Effective delegation skills.
• Experience in managing large-scale construction projects.
• Language: Chinese, English. Japanese would be preferred.

Documentation Management:

· Create and maintain project files, documents, and records.

· Organize and categorize project-related materials for easy access.

· Ensure that project documentation is up-to-date and accurate.

Scheduling and Planning:

· Assist in creating project schedules and timelines.

· Coordinate meetings, appointments, and project-related events.

· Coordinate and liaise with clients and any other government authorities and agencies for applications, submissions, and work arrangements.

· Pre-condition and post-work surveys to document site conditions for project records and closing out of authorities’ applications.

· Joint inspection and measurement with the client for project claim submission.

· Quantity surveying for preparation of sub-contractor contracts.

· Monitor project progress and deadlines.

Efficiency Management and Documentation:

· Assisting the project manager in ensuring efficiency and datelines are met.

· Coordinating between team members to ensure files are up to date and shared commonly.

Communication:

· Act as a point of contact between project team members, stakeholders, and external partners.

· Distribute project-related information and updates to relevant parties.

· Assist in preparing and distributing project reports, presentations, and meeting minutes.

Budget and Financial Support:

· Assist in tracking project budgets and expenses.

· Help with financial documentation and reporting.

Quality Assurance:

· Assist in ensuring that project deliverables meet quality standards.

· Maintain records related to quality control, testing, and batch installation.

Team Support:

· Provide administrative support to project team members as needed.

· Facilitate team meetings and communication.

Reporting:

· Generate and distribute regular project status reports.

· Compile data and metrics for project performance analysis.

Requirements

• NITEC or Diploma in Business, Quantitative Survey, Project Management, Engineering or any relevant fields of study.
• No prior experience required.
• Good command of written and oral English.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.

5.25 days' work week, alternate Saturday (half day).

8.30am to 6pm.

Quality Lab Support Coordinator

6 months contract

About the Company:
Our client is a US healthcare and a leading global biopharmaceutical company. They have a revenue of US $40.1 billion, with more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission

Responsibilities:

In this role, you will be responsible for all or subset of the key responsibilities below:

• Receive, archive, retrieve and dispose retention sample, following standard work, approved procedures and regulatory requirements in timely manner.
• Maintain proper 5S and ensure inspection readiness of retention sample rooms.
• Perform assigned tasks within stipulated timeline and escalate discrepancies to Reporting Manager.
• Support laboratory supplies stock check, receiving, stock arrangement and disposal as necessary.
• Any other duties as assigned by reporting manager.

Requirements:

• GCE O Level qualification and above
• Proficient with computer software such as Microsoft Word & Excel
• The role will require the person to be able to move heavy boxes up to 15 KG during process like transfer of samples/stocks checking.
• Customer focus with strong business acumen and continuous improvement mindset.
• Critical thinking mindset with a collaborative and problem-solving attitude.
• Good communication and interpersonal skills.
• Ability to work effectively in a team-based environment.

Reg No: R22104540

EA License no: 94C3609

Join UCT and be part of the fastest-growing sector in the world! We indirectly touch every semiconductor chip that goes into every smartphone, smart car and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented employee is committed to continuous innovation, challenging the status quo and exceeding customer expectations. If you are a person with a relentless drive to succeed, a strong focus on quality with a passion for success – join us today!

UCT is looking for a Configuration Engineer to join us in Singapore!

Duties and Responsibilities:

• Review and ensure NOC and S.O configurations accuracy.
• Creating and submitting Engineering Changes through Agile.
• Maintain sales order BOM & initiate ECO change management.
• Coordinate the ECOs/MCOs/DEVs/ECRs/SRD process internally. Flawless execution on tracking the implementation of ECO/ECN/ECR/SRD.
• Submitting Problem Report/ Supplier Problem Sheet to customer for BOM related issues (engineering-related issues).
• Ensuring all affected parts and BOMs are included in the CR/IR/PR or corrected via the Engineering Change Order (ECO) process.
• Understand the scope of the engineering change downstream.
• Responsible for setting up, manage and revise all the customers' product information, i.e. BOMs, part numbers and AVLs to have proper control on assembly revision.
• Streamline the BOM structure setup with Product Engineer for assembly sequence control, traceability data collection and material back flush accuracy.
• Work with Product Engineer to restructure customer BOM to work with UCT manufacturability.
• Validate and ensure all customer document packages such as Assembly DWG, Fabrication DWG, Procedure & Test and Manufacturing Instruction available and upload to Agile system.
• Work closely with internal/external customers to resolve any configuration issues.
• Generate list of new parts/new revision parts that needs sourcing info to the quote team for pre-determined NPI projects.
• Lead department improvement projects ie: RPA, QMS BKM, Global Training Videos.
• Ability to guide and provide technical supervision and technical support and guidance to other engineers.
• Attend audits ie: customer’s , internal and third party certification audits.
• Other tasks and responsibilities as assigned by manager.
• Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without.

Knowledge, Skills and Experience:

• Proficiency with MS suite, and ADOBE Acrobat. Advanced Excel knowledge, and design experience is a plus.
• Knowledge with engineering documentation and document control procedures.
• Able to read technical drawing and mechanical BOM.
• Basic understanding of Industrial Equipment manufacturing.

Educational/Certification Requirements:

• Degree in Engineering with a minimum of 6-8 years of related experience.

At Ultra Clean Technology, we do not just welcome diversity - we celebrate it! Ultra Clean Technology is proud to be an equal opportunity employer. We are committed to equal employment opportunity regardless of race, color, national or ethnic origin, a,ge, religion, disability, sexual orientation, gender, gender identity and expression, marital status, and any other characteristic protected under laws and regulations.