Responsibilities:

• Liaise and work closely with the consultant, clients and subcontractors on the progress of Plumbing & Sanitary installation work to meet the project schedule.

• To supervise and ensure works are in accordance to the contract drawings and specifications

• Prepare correspondence reports, suggesting corrective actions or value added recommendations according to best practice when applicable,

• Responsible for keeping daily work record, including additional work claim to the clients and from the subcontracts.

• Other ad-hoc duties when assigned

Requirements:

• Min Diploma / Degree in Mechanical Engineering.

• Knowledge in design skills and usage of AutoCAD/ Revit will have added advantage. • Be able to work independently with minimum guidance and under pressure to meet tight deadlines.

• Reports to Package Manager
• Perform interface management between the Vendors, the yard and Owner
• Review and checks documents and drawings from the Vendors to ensure compliance with specification
• Ensure that yard drawings adequately capture Vendor’s details and requirements
• Monitor, control and report Vendor’s progress against the plan to ensure on time completion and delivery against the plan
• Coordinate the yard FAT procedure, review and approve Vendor’s FAT procedure
• Coordinate and attend FAT
• Coordinate and approve Vendor’s Packing list and coordinate delivery of the Vendor Package
• Perform periodic visit to site to confirm equipment readiness for installation, for completion and for vendor callouts
• To coordinate and perform inspection upon delivery
• Support site installation and completion of the Vendor Package
• Ensure that Vendor’s requirements are adequately carried out during installation
• Manage overall Vendor Call Outs
• Responsible for daily management and interface for Vendors Site Service Engineers
• Review SAT/ CTPs to ensure that test procedures are in line with Vendor’s requirements
• Lead / support site pre-commissioning and commissioning of the Vendor Package
• Support Commissioning Manager during the Commissioning phase of the Project
• Final documentation close out with Vendor
• Travel overseas for work / assignment as and when necessary or requested by your immediate Supervisor / Head of Department
• Any other assigned duties and responsibilities when tasked by immediate Supervisor / Head of Department.

Job Requirements

• Minimum Diploma in Engineering discipline or equivalent
• Strong interpersonal and communication skills, general interest mindset, ability to address conflict constructively
• Able to multi-task and able to work in a fast-paced environment
• Possess positive and willing to learn attitude
• Proficiency in MS Office Suite (Advanced Microsoft Excel)
• Minimum 5 years of experience in marine, offshore and renewable sectors
• Location: West - Pioneer

• Handle schedule work in accordance with the master and detailed work program.
• Manage technical and engineering problems.
• Liaise with consultants for technical issues and organise site activities with subcontractors.
• Maintain quality standards and perform site inspections and resolve technical issues on time.

Requirements:

• Degreein Civil Engineering recognised by Singapore PE Board.
• Registered Resident Engineer with IES/BCA.
• At least 3 years of relevant working experience preferably in handling LTA projects.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job ID: 19229

• Location: Tuas West Road
• Working hours: 9am – 6pm
• Salary: up to $3,800 (Depending on experiences)

Job Description

• To perform troubleshooting, testing, commission of die cast machine.
• To perform planning, repair works, maintenance, and complete overhauling on-site/workshop
• Experienced in PLC is an added advantage

Job Requirement

• Candidate must possess at least Nitec/ Higher Nitec/ Diploma in Electrical/Mechanical Engineering
• Preferably with 3 - 5 years working experience
• Willing to travel oversea
• Self-motivated, able to work independently
• Class 3 driving license

Interested applicants, kindly send your updated resume to Joanne (R21101135) [email protected] with the email subject header "Job Application for "19229, Assist Service Engineer/ Service Engineer (Die Cast Machine)".

Only shortlisted candidates will be notified, other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Please find Privacy Policy Agreement from the below link.

http://www.pasona.com.sg/privacy.html

Pasona Singapore Pte Ltd

Joanne Yeo Min Qian
EA License No:90C4069

Registration No.: R21101135

Job Responsibilities:

• Able to plan/coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at the site and recommend solutions to relevant teams/departments.
• Review Architectural drawings for conflicts with Structural/M&E and liaise with consultants to resolve issues.
• Ensure all work is carried out within the schedule and maintain the required quality.
• Ensure a safe work environment at the work site and manage workers.
• Assist the Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submitting and monitoring technical drawings, method of statements, and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.

Job Requirements:

• Possess a Degree / Diploma in Civil Engineering / Structural / Architecture and related discipline.
• Experience in LTA-MRT project will be advantageous
• Proficient in Microsoft Office/Projects, Autodesk AutoCAD/Revit.
• Ability to keep a positive attitude in a fast-paced environment.
• Good attitude, good communication skills, and good team player.

Job Responsibilities:

• Able to plan/coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at the site and recommend solutions to relevant teams/departments.
• Review Architectural drawings for conflicts with Structural/M&E and liaise with consultants to resolve issues.
• Ensure all work is carried out within the schedule and maintain the required quality.
• Ensure a safe work environment at the work site and manage workers.
• Assist the Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submitting and monitoring technical drawings, method of statements, and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.

Job Requirements:

• Possess a Degree / Diploma in Civil Engineering / Structural / Architecture and related discipline.
• Experience in LTA-MRT project will be advantageous
• Proficient in Microsoft Office/Projects, Autodesk AutoCAD/Revit.
• Ability to keep a positive attitude in a fast-paced environment.
• Good attitude, good communication skills, and good team player.

Location: North Vista Primary School, 20 Compassvale Link, Singapore 544974
Contract Period: 1 January 2025 to 31 December 2025

Working Hours:

• Monday to Thursday: 7:30 a.m. - 4:45 p.m. (inclusive of 1-hour lunch break)
• Friday: 7:30 a.m. - 4:15 p.m. (inclusive of 1-hour lunch break)
• Note: Service is not required on Saturdays, Sundays, and gazetted public holidays.

Key Responsibilities:

Science Laboratory:

• Prepare experimental setups for all lab activities, trial experiments, and modify them as required prior to Science lessons and enrichment activities.
• Prepare additional apparatus for teachers conducting supplementary Science activities and assist during Science Workshops.
• Assist with purchasing materials required for experiments in alignment with budget requirements for both curriculum and enrichment lessons.
• Ensure and maintain the cleanliness of the two Science Labs.
• Conduct stock-taking of all apparatus and resources belonging to the Science department at least twice a year.
• Maintain a logbook for entries of classes into and out of the Science labs.
• Maintain a logbook for broken/condemned apparatus and chemicals in the Science labs.
• Prepare the Outdoor and Indoor Hydroponics/Urban Farming Facility for planting and harvesting, followed by cleaning for the next harvest.
• Monitor the Science Ecological Gardens and assist in plant replacement as needed.
• Maintain the laboratory aquariums, including water changes and assisting in plant and livestock replacement.

Makerspace:

• Prepare materials and tools for makerspace recess activities and workshops.
• Manage and maintain makerspace equipment, including 3D printers, digital cutters, and other tools.
• Provide technical support to makerspace users regarding equipment operation and troubleshooting.
• Maintain a clean, organized, and safe working environment within the makerspace.

Other Responsibilities:

• Support miscellaneous administrative tasks required by the HOD/LH Science/School Admin.
• May assist other departments in the school or at school events/activities when needed.

Minimum Qualifications, Skills, and Experience:

Educational Qualifications:

• An ‘O’ Level qualification and basic knowledge of IT applications (e.g., MS Word and Excel).

Language Proficiency:

• Must be proficient in English.

Skills:

• Ability to multi-task and handle a fast-paced environment.

Experience:

• Preferably at least 3 years of working experience in a school environment with basic knowledge of laboratory chemicals and apparatus. Candidates without relevant school experience but with comparable skills and qualifications will also be considered.

Responsibilities:

• Providing IT technical support and managing of office network/system.
• Monitoring and managing of system security.
• Overseeing tech refresh of office IT systems.
• Responsible for patches and updating of IT framework.
• Monitoring and managing of IT inventory hardware and software licenses.
• Participation and supporting IT upgrading projects.
• Analyzing, monitoring and providing reports on IT infrastructure.

Requirements:

• Preferably 1 – 2 years of relevant experience in the IT industry
• Diploma or Degree in Information Technology or related qualification
• Familiar with different operating systems including Windows and Mac environment
• Knowledge in Privileged Account Security solution will be an added advantage
• Self-motivated and able to work in a team to deliver results

• Conduct Geotechnical Analysis, Soil Classification, Data analysis and interpretation of instrumentation works Submit progress/ technical reports and assessment on geotechnical issues on site.
• Responsible for all on-site geotechnical and engineering issues pertaining to site matters.
• Coordinate with sub-contractors and attend to clients for queries. To conduct the geotechnical investigation and/or instrumentation projects to meet the schedule and specified requirement
• To prepare and submit factual and/or engineering reports on the respective projects
• Initiate and co-ordinate projects according to schedule.
• Assist engineering analysis and attend the site meeting.
• Any other duties as assigned by the project managers.

SHOULD YOU ACCEPT THIS CHALLENGE...

• Purity Environment Upgrade (65% of work) Proactively seek to understand customer expectations.
• Involves change controls, scheduling windows, compliance and activity to upgrade Pure Storage systems within customer environments. Maintain install base requirements with customers and their arrays.
• Apply best practices and maintenance.
• Upgrade customer arrays to the latest software version.
  Global
• Insight and/or Cloud Insight support tickets (proactive tickets) (30% of work)
• Ensure RMA requests are processed promptly and accurately Triage support cases based on severity level
  Own and track customer issues using our ticket tracking system
• Communication - part of upgrade and maintenance (proactive tickets)
• Maintain communications with customers on the progress of their cases.
• All communication should be professional, complete, well-formatted, and consistent with prior communications.
• Applies documented troubleshooting steps to resolve routine issues.
• Notify a Support Manager of critical customer issues.
• CSS Overflow (5% of work)
• Engaging customers via live phone calls, and connecting with the best resource.
• Weekend, holiday, and on call duties as required
• You will be based in Singapore. As this is an office-centric role, you are expected to be present in the office for 4 days a week. As outlined in Pure's Hybrid Work Policy, there will be variations over periods of time, depending on business need.

C&S Resident Technical Officer

Institution Project at Dover

Job Description:

• Assist RE/Consultant Team to attend to technical and design issues at site and report issues to RE/Consultant Team
• Provide standing supervision as and when directed by the Consultant team.
• Check through construction drawings and highlight any discrepancies found between or within the same disciplines prior to the commencement of installation works.
• Ensure all works are carried out in accordance to approve drawings and specifications.
• Ensure adequate safety precautions are enforced on site.
• Resolve all site issues and ensure timely completion of the project.
• Attend site meetings, site inspections, testing and commissioning.
• Maintain site records.
• Commencement of work on 1 December 2024.

Job Requirement:

• ITE certificate / Diploma in Civil Engineering from a recognised tertiary institution.
• Accredited with IES-ACES Joint Accreditation Committee (JAC) with valid RTO Practising Certificate
• Minimum 5 years working experience as a Resident Technical Officer.
• Preferably with experiences in Institution projects.
• Excellent Interpersonal and Communication skills.

Please submit your full resume, contact number(s), current & expected salary, copies of educational certificates and date of availability in your application.

Job Description

• Industry/ Organization Type: Manufacturing (O&G)
• Position Title: Technical Sales Engineer
• Working Location: Redhill
• Working Hours: 5 days (Monday to Thursday 8.30 AM – 6 PM, Friday 8.30 AM – 5 PM)
• Salary Package: Basic Salary up to $6,000 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Develop and grow key accounts in the Oil & Gas or Petrochemical sector.
• Establish and maintain business relationships with target customers to secure sales.
• Cultivate a comprehensive understanding of the customer’s operations and objectives.
• Develop and adhere to optimum profit margins and pricing points.
• Monitor assigned accounts - including progress, customer requests, competitor activity, and execution updates.
• Collate forecasts and reports for each key product/service offering assigned.
• Plan and negotiate long-term contracts with key account customers.
• Present and close sales opportunities to executives at major oil companies.
• Continually push company’s product/services to existing customers.
• Coordinate site work and discuss technical requirements on-site with customers.
• Review customer requests and provide technical solutions.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or equivalent.
• Has 3 years of working experience in downstream oil and gas/petrochemical industry preferred.
• Prior experience in flange management is advantageous.
• Proficiency with CAD tools such as Solidworks and AutoCAD is an advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69726 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Responsibilities:

• Monitor and inspect Mechanical and Electrical (M&E) installations and works on construction sites.
• Ensure that M&E works comply with project specifications, drawings and regulatory requirements.
• Conduct regular site inspections to verify quality of M&E installations and adherence to safety standards.
• Review M&E shop drawings, method statements, and material submissions.
• Coordinate and communicate effectively with contractors, consultants, and relevant authorities.
• Assist in resolving technical issues and provide solutions during the construction phase.
• Maintain detailed records of site activities, inspections, and approvals.
• Participate in meetings and discussions related to M&E works progress and issues.
• Conduct tests, commissioning, and handover of M&E systems upon completion.
• Ensure timely completion of M&E works within budget and schedule constraints.

Job Requirements:

• Degree in Electrical, Mechanical Engineering, or related field.
• Minimum 5 years of experience in overseeing M&E works on construction projects.
• Registered as a Resident Technical Officer (RTO) with the relevant authority (e.g., BCA in Singapore).
• Strong knowledge of M&E systems, building codes, regulations, and construction practices.
• Proficiency in reading and interpreting technical drawings, specifications, and contracts.
• Excellent communication, negotiation, and problem-solving skills.
• Ability to work independently and as part of a team in a fast-paced environment.
• Familiarity with project management software and tools is advantageous.
• Commitment to safety, quality, and compliance with environmental regulations.

Responsibilities:

• Provide first-level helpdesk and end-user support.
• Install, configure, and maintain hardware, software, networks, printers, and scanners.
• Monitor and manage network infrastructure and connectivity (patch panels, UPS, routers, switches, firewalls, VPN, etc.).
• Administer physical and virtual servers, including patching and updates.
• Manage user accounts (Active Directory, LDAP) and troubleshoot and resolve system and network issues.
• Perform equipment repairs and replacements as needed and oversee backup operations.
• Maintain documentation and create relevant support reports.
• Support application rollouts and maintain software license records.
• Manage IT assets, inventory, and supplies.
• Coordinate with vendors for procurement and maintenance.
• Test and evaluate new technologies.

Requirements:

• 3-4 years of experience in end-user IT support or a computer operations environment.
• Proficiency in installation, configuration, migration, and maintenance of servers, PCs, OS, and software.
• Strong troubleshooting skills for Windows 10/11 and experience with Windows Server 2012/2016/2021.
• Experience with Active Directory, email accounts, Symantec Endpoint Protection, and Veritas Backup Exec.
• Basic networking (DNS, DHCP, VLAN) and advanced printer/peripheral troubleshooting.
• Interest in learning new technologies; cybersecurity knowledge is a plus.

To Apply:

Interested candidates who wish to apply for the advertised position, please click on “Apply Now” and “ATTN: HL”

Loh Hui Ling | Registration No: R24122909 | EA Licence No: 12C6253
Dynamic Human Capital Pte. Ltd. | 2 Kallang Avenue #03-08 CT Hub Singapore 339407

By submitting any application or résumé to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

Under the revised Employment Agencies Licence Condition 5(b), employment agencies (EAs) are required to collect the personal data (e.g., NRIC, FIN) of applicants referred to employers for permanent or contract job positions of at least 6 months with a fixed monthly salary of $3,300 and above. PDPA requirements on collection, use and disclosure of personal data are not applicable to EAs that are collecting such information, as it is a regulatory requirement.

https://www.mom.gov.sg/faq/submit-quarterly-referral-and-placement/are-employment-agencies-allowed-to-collect-personal-data

a) Minimum Diploma in Mechanical / Electrical Engineering

1. To study the contract documents and drawings and verify if there are any discrepancies

among the drawings. All discrepancies shall be brought to the attention of the design team

concerned.

2. Liaise with the contractors/sub-contractors in the coordination of site works

3. Ensure the contractors maintain work safety, cleanliness and tidiness of the site

4. To ensure that all installation methods and materials used are in accordance with the

contract drawings and specifications.

5. To liaise with the contractors and design team in the checking and approval of shop

drawings, catalogues and samples.

6. To liaise with the contractors for the witnessing, inspection and coordination of site works where required.

7. To supervise the construction of mechanical and electrical works, and work with other resident supervisory staff deployed on site for successful completion of the Project;

8. To generate defects list, supervise and monitor progress of rectification works and ensure

all defects are rectified.

9. To follow up on site for the Consultant comments on shop/as-built drawings.

10. To check operation and maintenance manuals.

11. To assist in handing over of the installations to the Employer's maintenance staff.

12. To undertake any other duties related to the project as and when instructed by the

Employer.

13. For Acceptance Inspection and Commissioning Tests, all test reports and certificates shall be endorse by the site staff (RTO) and shall be forwarded to Architects/S.O. or employers representative for review and acceptance.

14. To supervise the execution of the Works and ensure that the Works are carried out by the Contractor in accordance to the specification / bills of quantities, drawings and all other contract documents and shall exercise all necessary supervision to ensure Employer’s interest are protected during the course of duty. In connection herewith, the Consultant shall engage the approved number of full-time residential technical officer (RTO) to carry out the supervision of the installation of the mechanical and electrical works during the contract period including any extension of time. They shall directly report to the Consultant.

15. To prepare weekly and monthly site inspection and progress reports for the Consultant.

16. To maintain records of all site correspondences and inspections records.

17. To verify site installations and work done on site, to facilitate progress claims made by the Contractor.

• Work closely with the project manager and administer the design control system and programming to meet budget and timeline expectations of the project.
• Responsible of modifying controls, designs, and other documents in accordance with processes and standards and in line with industry standards as per the customer's URS.
• Assist and participate in internal the purchase, FAT and SAT, test and debug, controls and validation operations.

Requirements:

• Diploma in engineering or equivalent
• At least 3 years of relevant work experience in control systems design.
• Knowledgeable in Allen Bradley and Siemens-S7 programming

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

About ACP:

ACP is the leading provider of learning management systems (LMS), e-learning, website development, and ICT solutions. In our current day and age, the adoption of technology in jobs worldwide has enabled us to streamline job processes and increase organisational efficiency, all thanks to the power of the internet. As such, digital literacy is a crucial skill that must be imparted to the next generation, and we continuously strive to empower every individual to learn through technology in our borderless world.

As a Quality Engineer, you have the opportunity to accelerate the delivery and to improve the quality of the software we build through recommending and implementing automated test suites.

Job Description:

● Work with the supporting vendors and government agencies to identify end-to-end test scenarios as well as to automate these test scenarios, applying risk-based strategy to minimize manual interventions.
● Conduct research on emerging technologies that can optimize and accelerate the project delivery.
● Ensure all required testing documentation are in place as part of production preparation checks.
● Drive and advocate continuous improvement in testing practices and tools.

Job Requirements:

● Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology, or related disciplines
● Minimum 3 years’ experience in application exploratory testing and regression test automation
● Understanding of Web-based project test methodology, test environments, bug life cycle, and frequent code release deployment QA support
● Create, review and/or support test automation strategies and implementations
● Experience working with highly trafficked, scalable Web applications
● Troubleshooting/debugging skills
● ISTQB, CSQA, CSTP or other relevant certification
● Experience with Katalon Recorder and/or Katalon Studio or equivalent
● Advanced knowledge of common desktop and mobile browser technology

Responsibilities:

• Plan and schedule maintenance for ground support equipments and vehicles.
• Manage inhouse manning and outsourced contractors.

Requirements:

• NITEC in automotive engineering or related.
• Knowledge or experience in car/ vehicle mechanic.
• Possess with class 3 driving license would be advantageous.
• Comfortable working shift work.

Other information:

• Working hours: 6 days per week, rotating shift including overnight
• Location: Changi

We regret that only shortlisted candidates will be notified.

By sending us your personal data and/or resume, you are deemed to consent to AM Recruitment Pte Ltd or its agents to collect, use and disclose your personal data and/or resume for the purpose of processing and administrating this job application.

Registration No: R23117478 (Mandy Lim Teng Hong)

EA Licence No: 23C1821 (AM Recruitment Pte Ltd)

The exceptional EY experience. It's yours to build.

At EY, you’ll have the chance to build a career as unique as you are, with the global scale, support, inclusive culture and technology to become the best version of you. And we’re counting on your unique voice and perspective to help EY become even better, too. Join us and build an exceptional experience for yourself, and a better working world for all.

The opportunity:

EY DnA is the data and advanced analytics capability within EY Asia-Pacific, with over 500 specialist employees working across multiple industry sectors.

We implement information-driven strategies, data platforms and advanced data analytics solution systems that help grow, optimize and protect client organizations. We go beyond strategy and provide end to end design, build and implementation of real life data environments and have some of the best architects, project managers, business analysts, data scientists, big data engineers, developers and consultants in the region.

We are looking for a Data Engineer within the DnA team in our Singapore office. This role is offered on a flexible full time basis.

Your key responsibilities:

• Apply data mining, data modelling, natural language processing, and machine learning to extract and analyse information from large structured and unstructured datasets
• Develop and implement techniques and analytics applications to transform raw data into meaningful information using dataoriented programming languages and visualisation software.
• Visualise, interpret, and report data findings and may create dynamic data reports as well
• Design, develop, and maintain the organization's data architecture, including data pipelines, databases, and data warehouses.
• Develop and maintain ETL (Extract, Transform, Load) processes to efficiently move data from various sources to the data
• Implement data quality checks and monitoring processes to identify and resolve data issues in a timely manner.
• Collaborate with data scientists, analysts, and other cross-functional teams to understand data requirements and deliver data solutions that meet business needs.

Skills and attributes for success

• Experience in ETL, Data Engineering, Scripting.
• Knowledge and experience in end-to-end project delivery, either traditional SDLC or agile delivery methodologies (or hybrid approaches)
• Experience in a delivery role on Business Intelligence, Data Warehousing, Big Data or analytics projects
• Exceptional communication, documentation and presentation skills and stakeholder management experiences
• Experience in business intelligence, data warehousing/platform, and data strategy projects

To qualify for the role, you must have

• At least a Bachelor's degree in any of these faculties: Computer Science/Information Technology/Programming & Systems Analysis/Science (Computer Studies)
• Minimum total 6 years work experience in at least 1 of these job titles: (1) Chief Data Scientist (2) Data Engineer (3) Data Scientist (4) Head of Data Analytics
• Experience in development and maintenance of Data processing pipelines
• Experience developing machine learning workflows
• Work closely with business analysts to create data components
• Application packaging and deployment experience across DEV to PROD environments

Ideally, you’ll also have

• Dashboarding experience with Tableau / Power BI
• Experience in engaging with both technical and non-technical stakeholders
• Consulting experience and background, including engaging directly with clients

What we look for

• Highly motivated individuals with excellent problem-solving skills and the ability to prioritize shifting workloads in a rapidly changing industry.
• An effective communicator, you’ll be a confident leader equipped with strong people management skills and a genuine passion to make things happen in a dynamic organization.

What we offer

EY offers a competitive remuneration package commensurate with your work experience where you’ll be rewarded for your individual and team performance. We are committed to being an inclusive employer and are happy to consider flexible working arrangements, where this may be needed, guided by our FWA Policy.

Plus, we offer:

• Continuous learning: You’ll develop the mindset and skills to navigate whatever comes next.
• Success as defined by you: We’ll provide the tools and flexibility, so you can make a meaningful impact, your way.
• Transformative leadership: We’ll give you the insights, coaching and confidence to be the leader the world needs.
• Diverse and inclusive culture: You’ll be embraced for who you are and empowered to use your voice to help others find theirs.

If you can demonstrate that you meet the criteria above, apply now.

To learn more about our service offerings, visit https://www.ey.com/en_gl/careers/what-you-can-do-here or subscribe to http://www.youtube.com/ernstandyoungglobal

To learn more about careers in EYSG, please visit https://www.ey.com/en_sg/careers or like us on https://www.facebook.com/eycareerssingapore

Senior /Design Engineer (C&S)

• A1 Main Contractor
• Full time permanent roles
• Large scale buildings/infrastructure projects

Job Responsibilities:

• Conduct design analysis
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications and design instructions.
• Develop engineering drawings and ensure specifications/regulations are followed.
• Liaise with Consultant, engineers and other departments to ensure that the design intentions are met.
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices.

Requirements:

• Degree in Civil Engineering from accredited Universities

For more information, please apply with a word format CV or contact Khai Lun at +65 9014 5741 or email me at [email protected] to have a confidential discussion on the position.

We regret that only short-listed candidates will be notified.

Registration No. R1984761
EA Licence No. 19C9622

What you will do

• APU Physical Design Implementation for APU partitions focus on MDLA/NDLA n5/n4/n3e/ process
• Physical VerificaTion to deliver clean APU partition gds N5/n4/n3e/ process
• Perform Timing Closure ECO for APU partition including PrimeTime timing check and twk timing ECO

What you bring

• Apr hands on for n5/n4/n3e process using Innovus and Fusion compiler EDA tool
• tcl/csh/perl/bash. programming skill
• Timing Analysis Debugging and Fixing skills
• Experienced N4/N3e process

The computer vision / image processing engineer is responsible for developing and implementing algorithms and software tools to process and analyse images for various object detection applications from multiple real-time mission-critical image sources, such as electro-optical, thermal imaging sensors and other sensors.

The job scope includes:

• Research various imaging systems and validate them.
• Using optical metrology techniques, calculate and calibrate cameras for outdoor real-time mission-critical applications
• Designing and testing image processing systems and components, such as filters, edge detectors, feature extractors, classifiers, etc
• Optimising the performance and accuracy of image processing algorithms using techniques such as parallel computing, machine learning, deep learning, etc
• Collaborating with other data scientists, engineers, researchers, and clients to understand the requirements and specifications of image-processing projects
• Document and present the results and findings of image processing experiments and analyses

Requirements:

• A bachelor's degree or higher in computer science, physics, mathematics or a related field
• Experience in image processing and/or computer vision, preferably outdoor systems
• Deep understanding of the imaging systems' sensor characteristics, optical metrology techniques and image signal processing
• Hands-on experience in the image processing pipeline. (Zoom and focus, auto white balance, camera colour conversion, colour space and colour management, etc.)
• Expertise in identifying diverse colour issues within intricate ISP systems and in precision tuning of parameters to achieve optimal image quality
• Knowledge of mathematical modelling, statistical analysis and image processing techniques. (Kalman filtering etc.)
• Proficiency in Python, C++, MATLAB or other programming languages
• Familiarity with popular frameworks and libraries for image processing and machine learning, such as OpenCV, TensorFlow, PyTorch, scikit-image or PIL
• Ability to work independently and as part of a team
• Excellent communication and problem-solving skills

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Electrical Engineer for the next phase of their business. They are located in West.

Duties:

• Supervise and enhance the reliability of electrical equipment in the Gas Engine Generator (GEG) area.
• Implement and maintain reliability programs and maintenance procedures for electrical systems.
• Manage minor CAPEX electrical projects in line with company standards.
• Investigate electrical failures to identify root causes and implement solutions.
• Coordinate with external stakeholders, including government agencies, on electrical matters.
• Support major expansion projects from an electrical and operational perspective.
• Work with Licensed Electrical Workers to ensure system integrity.
• Participate in emergency response, with assigned roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in Electrical maintenance or design

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Permanent, 5days, Paya Lebar

Our client

MNC in air conditioning and humidification system solution serving high tech industry.

Responsibilities:

· To Conduct assessments of hvac designs to ensure that they meet the required specifications and standards within allotted timeline.

· To verify and prove that hvac systems in data centre build and function according to the requirement.

· To execute, lead n manages the commissioning process across all projects, from start-up, designing, construction, acceptance, functional performance and systems testing to operational turnover.

· Management of 3rd party commissioning agents, supplier, contractor, client to resolve any issues on site

· To perform project closeout and handover

· To produce Commissioning Report for each project.

Requirements:

· Diploma in Mechanical Engineer or related disciplines.

· 3 years’ experience in hvac data centre of commissioning management or hvac data centre design management

· Proficient in data centre safety and industry standards

· 3 years’ experience in physical M&E equipment in data centre (especially hvac0

· Speaks and write 2 languages.

Please email your resume ( in word document )to [email protected].

We regret only shortlisted candidate will be notified.

Job Description

• Industry/ Organization Type: M&E Consultancy Firm
• Position Title: Mechanical Engineer (Building and Infrastructure)
• Working Location: East – Paya Lebar
• Working Hours: 5 days (Mon-Fri: 8.30 am - 6 pm)
• Salary Package: Up to SGD 5500 + Bonus
• Duration: Permanent

Key Responsibilities

• Build relationships with clients, consultants, and contractors from other organizations
• Carry out duties in accordance with company procedures and implement prescribed systems of work
• Understand design philosophy/design fundamentals and communicate engineering solutions to project stakeholders
• Perform engineering calculations with the aid of engineering software such as Computational Fluid Dynamics (CFD), and Full Hydraulic Calculation (FHC)
• Familiar with Architect, Structural/Service Engineers drawings/specifications.
• Carry out investigative and technical review works
• Responsible for the development and production of drawings/calculations/specifications /reports
• Set an example for the placement of students and younger engineers

APPLY NOW!!!

• Degree in Mechanical Engineering recognized by PEB Singapore
• Min. 2 years of working experience in the consultancy firm in the design of ACMV, fire, and hydraulic services
• Experience as a Contractor in project execution will be considered
• Experience in Energy Storage System (ESS) / Capability in carbon, sustainability, resources conservation, and renewables will be an added advantage.
• Carry out tasks and duties assigned in a positive and dignified manner

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67061 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694