Brief Description & Role

This position is responsible for testing, troubleshooting, and repairing RF components and systems. You will work closely with cross functional teams to ensure the quality and performance of RF equipment, ensuring that all devices meet the required specifications and standards.

Responsibilities

1. Conduct comprehensive testing of RF devices, nodules, and systems to verify their performance, functionality and compliance with industry standards.
2. Ability to read and understand circuit schematics, layout and diagrams.
3. Able to perform RF tests, analyze test data and produce detailed reports outlining findings, and recommendation for improvements.
4. Maintain and operate various RF Test equipment like Spectrum Analysers, Vector Network Analyser (VNA), signal generators, noise figure measurement etc..
5. To perform failure analysis and debugging PCBs to component level.

Requirements

· Diploma /Bachelor in Electronics or Communication Engineering, or equivalence

· Preferably with at least 2 years of working experience in a product-based electronics manufacturing environment / product development.

Skills, Experiences & Knowledge

· Experience in automating test and measurements using bench test equipment.

· Knowledge of programming software in C, C#, Python or LabView.

· Experience with PCB design software

· Experience in antenna parameter measurement

· Preferably with soldering experience

· Excellent communication and documentation skills.

Responsibilities :

• Perform reliability testing of components in accordance with AEC-Q200 requirements.
• Set up of test equipment for reliability testing.
• Provide technical support to the operators in various inspections, reliability tests and electrical tests, as required.
• Collect and record required reliability inspection reports and prepare reliability report.
• Perform scheduled maintenance and in-house calibration of lab equipment.
• Comply with relevant health and safety requirements in the lab.
• Perform general housekeeping at work area.
• Ship/receive test components from external vendors performing services.
• Follow a test plan traveler and ensure compliance.

Requirements :

• Nitec in Mechanical/Industrial/Manufacturing Engineering or equivalent.
• 2 years of working experience in manufacturing environment will be advantageous.
• Basic MS office skills and computer skills.
• Possess positive mind set and willingness to learn.
• Transport pick-up at Bedok MRT station.
• Air-con ,clean and new lab environment.
• Working hours : Permanent 12hrs Day Shift : 9am to 9pm ; Sunday to Tuesday & Wednesday (Alternate)

Sunlight Ambulance Services is your trusted Singapore private ambulance provider, serving patients from the general public and from leading medical institutions like CGH, SGH, KTPH and numerous nursing homes across the island. As we expand our company, we offer promising avenues for career progression. Successful candidates will be assigned to roles that align with their skills through the interview. Contact 624 111 20 if you are interested!

Responsibilities

As an Emergency Medical Technician, you will be responsible for responding to

• Non-emergency cases
• Attending to hospital discharges
• Patient appointments
• and providing dialysis transportation.
• Attend to cross-border, ferry, or airport transfers, as well as cover sports events when required.

Qualifications

• BCLS & SFA+AED Certification
• A Valid and Accredited EMT certification (within 2 years of validity) by SAF/SCDF/Alice Lee
• Good verbal skills to comfort the patients and relay information.
• Able to speak & write in English.
• Comfortable in working shifts, including weekends & Public Holidays
• Enrolled Nurse with Valid Certification can apply.

Job Highlight

We believe in rewarding our team members for their hard work and dedication to providing exceptional patient care therefore, in addition to your salary, you will receive case incentives and other benefits.

• Allowances, Incentives, AWS & KPI Bonus (full-time staff)
• Flexible shifts
• Islandwide locations
• We believe in upgrading our staff: Skills development training will be provided.
• At least 10 days of Annual Leave
• Child Care Leave
• Cell Phone Allowance
• OT Pay

Overtime compensation will be calculated in accordance with MOM regulations, which stipulate a rate of 1.5x the Base Salary.

Location: East

Mon to Fri 8am to 5pm

Have AWS & bonus

Hands-on job

Job Requirement

1. Able to do PLC, HMI, programming with Mitsubishi and Omron brand.

2. Experience in handling Mitsubishi and Omron product servo motor products.

3. Understanding and being able to design automation electrical circuits.

4. Hard working and able to work hands on.

Requirements

• Diploma in Engineering
• At least 2 years experience

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Summary

The Field Technician is responsible for outdoor onsite repairs of machines, and also training and delivery of new machines.

Primary Responsibilities

• Repair of cleaning machines, e.g. vacuum cleaner, high pressure jet, auto scrubbers etc
• Checking and repairing of customer’s machines onsite
• Delivery of new machines and training of customers
• Picking up and returning of workshop machines
• Maintain and clean own technical van issued
• Weekend standby duties (on rotation basis)
• Other duties as assigned

Additional Responsibilities

• Servicing of machines in workshop as required
• Assist in setting up of machines in warehouse
• Assist in deliveries as required
• Perform repair, maintenance and troubleshooting task both outdoors & indoors

Knowledge and Skill Requirements

• Minimum NTC,NITEC or Technical Trade
• Basic reading, writing and maths in English required
• Valid Singapore Class 3 license
• Familiar with Singapore roads
• Able to read electrical diagrams
• Experience in field service
• Experience with mechanical and electrical repairs (e.g. repairing vehicles, motorcycles, forklifts, etc.)

Job Description

• Assist the Supervisor with General Repairs, Installations, Technical Services, Maintenance and Equipment.
• Support technical services and perform troubleshooting to identify and solve issues.
• Follow safety protocols and adhere to company guidelines during tasks.

Job Requirements

• At least 1 YEAR basic technical knowledge / working experience, Candidate with NO prior experience are welcome to APPLY
• WITH VALID SINGAPORE CLASS 3 DRIVING LICENSE
• TRAINING will be provided
• Ability ro follow instructions and work efficiently under supervision
• Able to start work immediately or within short notice

Will be part of Operation & Support Team to support Project implementation and Maintenance.

The key responsibilities are as below:

Job Description:

Project:

• Support Project Team in Project implementation
• System setup, configuration and testing
• Perform any other duties as assigned.

Maintenance:

• Perform CUAS Preventive and Corrective maintenance works at restricted Areas.
• Provide support services in operation exercise.
• Perform functional check and/or repair on testers and unit under Test.
• Perform any other duties as assigned.

Requirements:

• NITEC / Higher NITEC / Diploma in Mechanical, Electronics or Computer Engineering
• Fresh graduate are welcome to apply
• Experience in Electronics, PCB-related, electrical & networking would be advantageous
• Able to work over the weekend and standby for fault call if required
• Able to interpret schematics, technical manual and drawings for maintenance works.
• Ability to use analytical skills and a "hands-on" person.
• Good interpersonal skills, proactive and work well with others.
• Possess class 3 driving license will be advantageous.

Interested candidates can click on 'Apply' or send updated resume to [email protected]

We are regret that only shortlisted candidates will be notify

Roles and Responsibilities

- Office working hour: 8.30AM – 5:30PM

- Scan & update of Service Report to NAS

- Scan & update of Incoming DO/AWB/INVOICE from Suppliers to NAS

- Update Records of Verification

- Update the inventory in Financio

- Deliver goods to customers when required

- Onsite support: Onsite PM & troubleshooting of RADIOLOGY EQUIPMENTS, DIAGNOSTIC MONITORS & PC & ACCESSORIES, NURSE CALL SYSTEM, OPERATING LIGHT

- onsite DVD/USB counter record update & sign the log check with customer on monthly basis

- onsite support, Preventive Maintainance & troubleshooting of automatic dicom DVD/USB burner & PACS system

- contact customer to resolve pending case id on daily basis

- prepare & Report of technicaL GUIDELINES

- Provide technical information for pre-bid and tender specifications

- Completes timesheets within the allocated time frame

- Roster standby support of after office work when REQUIRED (HAVING OT PAYMENT)

Requirements

- Basic knowledge of Microsoft Office & Computer

- Basic technical skill of self learning & researching

- Basic soft skill of communication with peers & customers

- Punctual & commitment with assigned tasks

- Able to work under pressure & short notice requirement

As an Outside Broadcast (OB) Cable Technician, you will play a vital role in supporting the preparation and deployment of OB cables for event coverage, primarily in sports.

This position provides an excellent platform to learn about rigging for broadcasting events and opportunity to travel with the crew after a couple of years of experience. No prior experience is necessary, as we will provide training to handle and prepare the various types of cables and rigging to support our projects.

Key Responsibilities:

• Collaborate with the OB Cable Team to prepare cabling requirements for outgoing shipments to all projects.
• Inspect, troubleshoot, and maintain cables from returning shipments post projects.
• Recoiling and packing of cables on drums, palletizing drums, and storing pallets on designated shelves.
• Test and prepare camera cables (SMPTE, Triax camera), audio looms cables and all engineering cables in general require for the interconnect and interfacing of broadcast equipment.
• Carry out fiber splicing, including using fiber tools and fiber optic test equipment, such as fusion splicer, power meter, and OTDR.
• Inspect fiber optic cables to ensure no defects that could undermine signal strength and performance and repair or re-splice damaged fiber if required.
• Test and prepare various audio, video, and power cables.
• Follow all company health and safety procedures.
• Perform other related duties as required.

Requirements and Qualifications:

• High school diploma or equivalent.
• Able to work in a fast-paced environment.
• Strong work ethic and a team player.
• Physically able to lift up to 20kg or more.
• Flexibility to work weekends and holidays.
• Willingness to work in a warehouse environment.
• Good verbal communication skills.
• Certificate to work at height is a plus.

Responsibilities :

• Perform failure analysis using various tools and instruments such as digital multimeter,digital microscope,electrical testing equipment.
• Perform Destructive Analysis (cross section, tear down, decapsulation)
• Able to perform part removal process (desoldering process, tool cutting pcb)
• Willing to learn and operate X-ray machine and SEM/EDX.
• Feedback the Failure Analysis findings to engineer for investigation and report compilation.

Requirements :

• Nitec or Diploma in Electronic and/or Electrical Engineering or equivalent.
• At least 1 years of working experience in electronic manufacturing environment will be advantageous.
• Entry level in relevant engineering field are welcome to apply.
• Basic MS office skills and computer skills.
• Possess positive mind set and willingness to learn.
• No Shift work
• 5 days work week (Monday to Friday, 8.15am to 5.15 pm)
• Transport pick-up at Bedok MRT station.

Receive incoming equipment for calibration and monitor outgoing equipment on a daily basis. • Perform calibration, inspection and troubleshooting of incoming equipment, including but not limited to dimensional, mechanical, electrical, temperature sensing components or devices, according to clients’ specifications using in-house instruments • Ensure calibration worksheets and certificates are completed not only on schedule and accurately, but also done so in compliance with any applicable standards. • Maintain the condition and accuracy of in-house master instruments in accordance with ISO specifications. • Administer corrective actions to defects found on equipment and ensure proper reporting to relevant parties • Work closely with the calibration head in improving calibration processes and quality control measures, as well as implementing good practices designed to improve calibration accuracy and/or efficiency, for the purpose of ISO certification audits • Perform general housekeeping duties to maintain the condition of the laboratory.

Only candidates with prior experience or formal education in an engineering-related field, quality control, i.e. quality assurance, calibration, or measurement will be considered • At least ‘O’ or ‘N’ level pass, or any equivalent. An advantage will be given to candidates with a NITEC, higher NITEC or technical diploma in precision engineering or any other related field, i.e. calibration, measurement, equipment testing, etc. • Able to work independently with minimal supervision in a fast-paced environment • Comfortable working in a lab environment • Able to start work immediately or at short notice • Applicants with a class 3 driver’s license will be granted an advantage.

Send in your resume or CVs to [email protected]

You will be required to:

• Perform pre-flight operations and post-flight operations on all training devices and complete the necessary documentation.
• Perform all preventive maintenance works and corrective maintenance works on all training devices as assigned.
• Respond to customers' training needs in a courteous and timely manner to ensure that the required reliability and availability of all training devices are met consistently.
• Adhere to AST’s quality standards.
• Assist in diagnosis on all training devices to isolate mechanical or electrical faults and repair faulty components where possible.
• Assist in the modification and upgrading of simulators training devices and related system components, devices, hardware, and software.
• Assist in running Qualification Test Guides.
• Perform logistical/administrative duties as demanded, including updating of technical documentation or logistical information.
• Perform housekeeping functions to maintain the simulator, training devices and related components.
• Make spare parts requests, shipping and receiving of parts and components.
• Assist and participate in national aviation authorities’ evaluations.
• Perform task to support our team as required.

You would ideally possess:

• Diploma or University bachelor’s degree in an engineering field (Aviation, Electronics, Automation, Mechanical etc).
• 1 to 2 years of relevant experience.
• Ability to work in a dynamic environment on a 12 Hour rotating shift (Day/Night) roster.
• Ability to read technical drawings and schematics of electronics, electrical and mechanical systems.
• Analytical thinking, with a high level of responsibility and ownership.
• Ability to work independently as well as in a team and have a result-oriented mindset.
• Experience in using and repairing PLC, electronics and computer equipment is advantageous.
• Experience in working with simulators or a similar field is advantageous.
• Ability to commence work immediately or within short notice is preferred.
• Entry Level is welcomed.
• Able to work 12 hours shift.

· Setting up electrical connections in R&D equipment

· Setting up of Jigs

· Other R&D tasks as required (PCB testing, assembly, soldering, paneling, cabling and misc work)

· Performing Goods Receipt

· Labelling and Packaging of components

· Inventory storage and housekeeping

· Training will be provided

Requirements:-

· Possess engineering experience in Mechanical/Electronics, or equivalent

· At least 3 years experiences in relevant or related field

· Good communication and interpersonal skill

· Proactive with good initiatives, problem solving skill and analytical ability

· Technical knowledge and hands-on skills on monitoring,troubleshooting, servicing, maintenance and tool recovery

· Able to work under pressure

· Experienced In Assembly, Automation, Testing / Soldering / Machine Alignment (eg. Perpendicularity) preferred

· Must be able to work night shift or split shift
. Must be able to work extra hours or weekend if needed

• Perform job inspection at first piece, in process and final inspection per the Job Instructions Sheet plans.
• Perform First Article Inspection (FAI) and Delta FAI per AS9102 requirements.
• Perform dimensional inspection using a variety of inspection gages & equipment.
• Initiate Quality Notification (QN) for non-conformance when products are not meeting Quality and Engineering requirement.
• Perform proper use and maintenance of gages and inspection equipment.
• Perform proper documentation including inspection stamping of quality paperwork.
• Maintain and improve 5S standards on workstations and responsible areas.
• Good communication and interpersonal skill and ability to communicate with all levels.
• Adhere to company EH&S policies and guidelines.
• Adhere to company Quality Policy.

Job Requirements

• NITEC/Higher NITEC qualification in Precision/Mechanical Engineering or higher.
• At least 2 years working experience in a quality control environment.

Preferred Skills

• Able to interpret basic technical (GD&T) drawings.
• Proficient in using hand gages; micrometer, dial indicator, height gage etc.
• Good command of written and spoken English.
• Basic operating knowledge of Co-Ordinate Measuring Machine (CMM) inspection; Carl Zeiss / Wenzel CMM.
• General proficiency of Microsoft Excel and Microsoft Word (SAP a plus).
• Non Destructive Testing (NDT) method in MPI Level 2 will be an added advantage.
• Able to perform weekly rotating shifts.
• Understand CORE Tools.

Candidates with more experience will be considered for a senior role.

A well established Fire Protection Co in Bedok Area requires Driver cum Technician

Job scope:

1) Ensure Fire Equipments in proper operational conditions and maintenance of Fire Alarm System, Fire Hosereel,Sprinkler sys, Dry/Wet Riser , Fire Hydrant, Fire Extinguishers etc.

2) Write Service Report on irregularities and troubleshooting.

3) Attendance to emergency breakdown and feedback.

4) Possess Class 3 driving License and well verse on SG Road Directory.

5) Fast Learner and hardworking

Job Description:

• Able to do assembly and disassembly various electrical components like Galley Ovens, Water Heaters and Bulk and Aft Cargo Heaters.
• Those without relevant product experience are welcome to apply as training will be provided.
• Able to read and understand Component Maintenance Manual and drawings.
• Able to use simple measuring instrument,
• Able to complete any given task in a short time.
• Must possess knowledge of authorities’ regulations.
• Must Understand Human factors limitations and comply with companies’ safety and quality policy.
• Work to clearly defined procedures under day-to-day supervision and maintain 5 S in workshop areas.

Requirements:

• Must have at least 2-3 years of Aviation Electrical/Avionics experience.
• Must be a team player.
• Must be able to communicate effectively with CS, Engineering and Quality dept.
• Must use clearly defined procedures to deliver results under guidance.
• ls self-motivated able to organize own time and deliver against priorities set by others.
• Must meet objectives as defined in annual appraisal.
• Holders of EASA M9 and M10 are an added advantage.

Job Description:

• Perform mechanical/electrical assembly or wiring for equipment/machine;
• Perform on-site service and support.
• Perform any other assignments assign by HOD;

Job Requirements:

• Experience in machine /electrical assembly or wiring for equipment/machine;
• Follow established safety rules and regulations;
• NITEC in Mechatronics/Electrical/related engineering field;

-Able to use laser cutting equipment .

-Able to do carpentry

-Able to do LED signages

-Able to do Electrical works

-Able to do Signage Installations

-Able to carry heavy load

-Able to work long hours, public holiday and overtime

• A minimum of 5 years’ experience in a similar role.
• Basic computer skills.
• Able to work independently and with a good working attitude
• Experienced/Responsible/Diligence.
• Strong team spirit.
• Able to work any shift
• Able to work on weekends and public holiday
• · Must be able to work night shift and split shift
• · Must be able to work extra hours or weekend if needed

1) To carry out preventive maintenance / servicing of fire protection systems for Residential, Industrial, Commercial Buildings & Hotels etc

2) Able to communicate effectively with good sense of responsibility with positive attitude and a good team player

3) Liaise with clients for servicing schedule & prepare service

report / work report

4) Basic knowledge on MS words & Excel for quotation & schedule purpose

5) Able to work independently

6) Basic knowledge on the operation of the fire protection system

Responsibilities:

1.Production Operation:

Operate and oversee food production equipment during scheduled night shifts, weekends, and public holidays to ensure seamless production processes.

2.Quality Assurance:

Conduct quality checks on raw materials, intermediate stages, and finished products to uphold quality standards during non-standard work hours.

3.Equipment Maintenance:

Perform routine maintenance and cleaning of production equipment during off-peak hours to minimize disruption to regular operations.

4.Adherence to Safety Standards:

Ensure compliance with safety protocols and regulations at all times, particularly when fewer staff members may be present during night shifts and holidays.

5.Team Collaboration:

Coordinate effectively with other team members working during overlapping shifts to maintain communication and operational continuity.

6.Problem Solving:

Troubleshoot and address any production issues promptly to minimize downtime and ensure productivity throughout non-standard work hours.

7.Record Keeping:

Maintain accurate records of production activities, quality control checks, and equipment maintenance during night shifts, weekends, and public holidays.

8.Skills and Qualifications:

Flexibility and Adaptability: Ability to adjust to non-traditional working hours and varying schedules, including night shifts, weekends, and public holidays.

9.Time Management:

Efficiently manage tasks and responsibilities within the context of a non-standard work schedule to meet production goals.

10.Attention to Detail:

Maintain high standards of quality and safety despite working during less conventional times.

11.Teamwork:

Collaborate effectively with colleagues across shifts to ensure smooth handovers and continuous operations.

Endure long hours and potential physical demands associated with night shifts and production tasks.

We appreciate your interest in joining our team. Please note that only shortlisted candidates will be notified. All resumes received will be used for recruitment purposes only.

EA License ID: 18C9520

EA Registration ID: R1765753

(No Experience is required, all training will be provided)

We are looking for a self-motivated trainee Site engineer/ Utility Detection Specialist (LCDW/TCDW) at our company. Our trainee engineers will form part of an integrated team and should be comfortable working well with the rest of our admin and drafter teams.

To be successful as a Utility detection engineer, you should stay up-to-date with detection methods, software, and advancements. Engineers must demonstrate attention to detail and have sound knowledge of the discipline.

- Oversee and carry out projects assigned to you

- Operating electromagnetic cable locator to detect and locate underground services (training will be provided)

- Liaising with drafter and admin staff to carry out projects

- Going to various sites to carry out projects

- Communicating and liaising with clients on their project

- Company transport will be provided (need to have class 2B or class 3 license)

Requirements:

No experience required

ITE Certification/ Poly Certification/ Degree Certification in Electrical/ Mechanical/ Civil Engineering

Lentor Ambulance provides Emergency Ambulance Service and Medical Transport Service to the general public of Singapore.Over the years, we have expanded our services to provide a variety of first aid & emergency medical training programmes.We are a growing company with excellent opportunities for career advancement.Applicants will be deployed to positions that are suitable for them as discussed during the interview.

Job Description:Provide care for patient in ambulance
Maintain supplies and equipment for medical emergencies
May be assigned to other projects/locations based upon operational needs.
Job Requirements:Physically fit
Accredited EMT certification will be an advantage
Good verbal skills to comfort the patients and relay information
Able to speak & write in English
Work shift including weekends & Public Holidays
Enrolled Nurse can apply
UPEC certification for Non-Singaporean
Skills development training provided
Allowances, Incentives, AWS & KPI Bonus
Family-friendly culture
Flexible hours
Islandwide locations
If you are confident and passionate to help the patient, APPLY NOW!!!!Only shortlisted applicants will be notified

Requirements:

· Candidate must possess at least NITEC/Higher NITEC in Mechanical/Electrical Engineering.

· Experience in Material Handling/ Automation/ Conveyor systems would be an Advantage.

· Able to read & understand Electrical Drawings or has PLC Controlled Systems Knowledge would be an Advantage.

· Proficient in MS Word and Excel

· Entry Level candidates is welcome to apply as Training will be provided.

Job Description:

· Perform Equipment Maintenance works according to Manufacturer’s Maintenance Instruction/Work Procedure and approved maintenance checklists.

· Carry out minor repair work as part of Preventive Maintenance work.

· Assist Supervisor during major repair work.

· To carry out ad-hoc duties assigned by Superiors.

Benefits:

· 5-day Work Week

· Annual performance bonus and year end AWS

· Medical and Dental Insurance (including family members)

Location:

· Changi Airfreight Centre / other Contracts assigned location.

Please email Resume to: [email protected]

Location: East

Mon to Fri 8am to 5pm

Have AWS & bonus

Hands-on job

Job Requirement

1. Able to do PLC, HMI, programming with Mitsubishi and Omron brand.

2. Experience in handling Mitsubishi and Omron product servo motor products.

3. Understanding and being able to design automation electrical circuits.

4. Hard working and able to work hands on.

Requirements

• Diploma in Engineering
• At least 2 years experience

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Location: East

Mon to Fri 8am to 5pm

Have AWS & bonus

Hands-on job

Job Requirement

1. Able to do PLC, HMI, programming with Mitsubishi and Omron brand.

2. Experience in handling Mitsubishi and Omron product servo motor products.

3. Understanding and being able to design automation electrical circuits.

4. Hard working and able to work hands on.

Requirements

• Diploma in Engineering
• At least 2 years experience

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368