• Troubleshoot and carry out minor repairs (electrical, plumbing, builder, etc) for the building and related facilities.
• Supervise sub-contractors who carry out approved repair works and scheduled maintenance in the building.
• Assist Facilities Executive & officer to execute preventive maintenance regime and/or ad-hoc upgrading project and monitor the work progress.
• Assist Facilities Executive & officer to attend to tenant’s feedback on the building and related facilities.
• Provide guidance and coaching to junior staff when required.

The Senior / Facilities Technician is responsible for daily engineering sections to support the hotel operations.

Primary Responsibilities

Daily Engineering Operations

• Operates the equipment to deliver a comfortable room temperature to hotel areas.
• Operates the equipment to deliver clean water to the respective services in the hotel.
• Operates the equipment to deliver hot water to the respective services in the hotel as required.
• Operates the equipment to deliver clear and sharp images from the television and satellites equipment to hotel guest suites as required.
• Operates the equipment to deliver audio visual support to the hotel event as required.
• Assists and supports the emergency operations team during an emergency and a crisis in a timely and efficient manner.

Shift Operations

• Rectifies equipment and facilities breakdown as required.
• Replaces faulty components / lighting bulbs as required.
• Responds to requests relating to technical issues from hotel patrons in a timely and efficient manner.
• Collects daily utilities meter readings and verify plant / equipment are in proper operations as required.
• Patrols hotel grounds to verify fire and safety risk as required.
• Patrols hotel grounds to verify all lightings on hotel grounds operate within the preset timings as required.

Plant and Facilities Services

• Operates plant facilities to support every aspect of hotel operations in a timely and efficient manner.
• Preventive maintenance.
• Rectifies / Repairs damaged furniture to the highest quality level and in a timely manner.
• Rectifies / Paints defective building surfaces to the highest quality level and in a timely manner.

Other Responsibilities

• Operates the hotel elevators and dumbwaiters as required.
• Operates the hotel swimming pool and water fountains as required.
• Operates the hotel fire protection services as required.
• Operates the hotel drainage and sanitary system as required.
• Operates the hotel television and satellites system as required.
• Operates the hotel public music system as required.
• Operates the hotel lightings and dimming system as required.

Involvement In Wider Job Function Actions/Relationships

• Upholds Accor Values of Guest Passion, Sustainable Performance, Spirit of Conquest, Innovation, Trust and Respect, in the execution of all duties and responsibilities.
• Participates and supports sustainability in Corporate initiatives and programmes such as Corporate Social Responsibility, Diversity and Inclusion.
• Performs any other duties and responsibilities that may be assigned.

Job Description

• Industry/ Organization Type: Shipbuilding and Repairing Service Provider
• Position Title: Ship Repair Engineer (Marine)
• Working Location: West (Nearest MRT: Clementi)
• Working Hours: 5.5 days (Mon-Fri: 8 am-5 pm, Sat: 8 am-12 pm)
• Salary Package: Up to SGD 4500 + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Conduct repair operations and oversee them meticulously onboard vessels, in port areas, anchorages, or shipyard settings.
• Manage and oversee the scheduling and execution of projects to ensure prompt completion.
• Perform assessments and determine cost estimates for repair requests.
• Understand technical drawings.
• Generate detailed technical and service reports, compile worklists, and maintain comprehensive documentation.
• Foster strong, collaborative relationships with clients and colleagues across all organizational levels.

APPLY NOW!!!

• Min. ITE in Marine / Mechanical Engineering
• Min. 3 years experience in a similar capacity in marine industries
• Proficiency in Microsoft Office
• Comfortable working on weekends if required

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66173 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

• Operate CNC machine/s to perform tasks
• Understand specifications of the task at hand and the desired result
• Prepare and load raw materials and parts onto the machines
• Prepare a test run to check if the machines produce outputs according to specifications
• Set machines to complete full cycles to fabricate large number of parts
• Supervise the machines while they execute the tasks and make any necessary adjustments to produce a better result
• Inspect and measure finished products and compare them with requirements to determine if the process has been completed properly
• Check and maintain and upkeep machinery daily to ensure functionality

Requirements

• At least 5 yrs experience in CNC operating
• Skill in operating CNC machinery and tooling as well as precision measurement tools
• Ability to read and interpret mechanical documents and drawings
• Computer savvy with basic understanding of computer programming and CAD/CAM
• Mechanical aptitude and good math skills
• A keen eye for detail and results-driven approach
• Good communication abilities
• Willing to work night shift and split shift
• Willing to work OT on public holiday and weekend
• · Must be able to work night shift and split shift
• · Must be able to work extra hours or weekend if needed

• Opportunities for professional development
• Good company benefits
• 5.5 days work week, Office hours

As a ACMV Technician, you will be responsible for the following duties:

• Perform all preventive and corrective maintenance for all air conditioning equipment.
• Ensure the proper storage of hand tools and uphold good housekeeping practices.
• Ensure that all tasks are executed safely and in line with safety procedures.
• Deliver technical advice and support for all maintenance operations.
• Generate service reports after each completed job for customer approval.
• Engage with clients regarding equipment issues and post-job reports.
• Any other ad-hoc duties assigned.

Requirement:

• Possess a Nitec in Mechanical / Electrical or related field.

To apply, simply click on the ‘’apply’’ button in the job advertisement or alternatively, you can send in your resume via email
Email Address: [email protected]
We regret to inform that only shortlisted candidates will be notified.

ALLIED SEARCH PTE. LTD.

EA LICENSE : 19C9777

AUDIO VIDEO TECHNICIAN:

GENERAL REQUIREMENTS:

· Orientated mindset.

· Pro-active, self-motivated, initiative

· Prior basic AV or Technical knowledge is preferred.

· Working hour: 6-days work week

· Class 3 driving license will be bonus (able to drive vehicle after accessed)

· Over-time pay available

Roles & Responsibilities

-Setting up of AV equipment for events.

-Setting up TVs, speakers and cabling

-Warehouse management, regular equipment checks and rectified faults.

-personal responsibility and initiative to resolve issue, able to work with teamates

-Motivated and committed, approaching all tasks with enthusiasm and seizing opportunities to learn new skills or knowledge in order to improve personal performance.

Job Description:

• Preparation of samples and standards for analysis
• Routine laboratory testing according to ASTM methods
• Operation and maintenance of instrumentation
• Maintenance of relevant documentation
• Any other duties as assigned when required
• Ensure all works and reporting of results are in accordance with Quality, Work and HSE procedures and requirements

Requirements:

• Minimum ITE Nitec/Higher Nitec/Diploma in Chemical Process and related fields
• Candidate with experiences is an added advantage
• Fresh graduate is welcomed as training will be provided
• Good analytical skills and ability to work independently
• Able to start work on short notice preferred

Work location : 121 Genting Lane, ALS Building, Singapore 349572

Please apply with detailed resume stating current/last drawn and expected salary, and notice period.

Job Description:

• Supporting deployment of on-site data centre physical infrastructure.
• Installing, replacing and troubleshooting Cables and Hardware.
• Handling data bearing devices (ex. hard drives, solid-state drives, etc.)
• Working within a ticket-based environment.
• Movement of equipment using pallet jacks or other assisted lifting equipment.
• As required, assisting the Datacentre Inventory and Asset Management Team (DIAT) with shipping/receiving and inventory management to address high work volumes.
• Flexibility to work non-standard business hours that may include weekends and/or holidays.

Requirements:

• Diploma / Degree in IT / Computer Engineering or equivalent
• 1 year of experience in IT Support & Monitoring (Will consider Fresh Graduate with good attitude)
• Basic knowledge of computer hardware and components.
• Six (6) months or more handling/maintaining any technical equipment or machinery.
• 1+ years’ experience supporting IT equipment or related technology.
• Applicable certifications: CompTIA (A+, Server+, Network+), Basic Structure Cabling (BSC).
• Ability to support frequent standing, walking, lifting, and working at heights with or without equipment assistance.
• Able to communicate effectively.
• Desire to learn, grow, and develop new technical skills.

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

At Alcon, we are driven by the meaningful work we do to help people see brilliantly. We innovate boldly, champion progress, and act with speed as the global leader in eye care. Here, you’ll be recognized for your commitment and contributions and see your career like never before. Together, we go above and beyond to make an impact in the lives of our patients and customers. We foster an inclusive culture and are looking for diverse, talented people to join Alcon.

As an Technician, Secondary Packaging you are tasked to ensure production meet Safety, Quality and Output target and operate in compliance to all GMP/GDP requirements and HSE regulatory requirements at Tuas. In this role, a typical day will include:

Responsibilities

• To provide operational support for productivity and product quality effectively and efficiently.
• To perform pack-size conversion and machine troubleshooting, actively engage to production
• technical support to improve production OEE.
• Good coordination across the team.
• To ensure good 5S standard and HSE compliance in SP operation.
• To drive and participate on the recovery process of non-routine issues
• Push rolling carts weighing approximately 300kg.
• Transfer contact lenses magazines between carts.
• Manual movement of the pallets using pallet jack.
• Manual transfer of completed tray to trolley.

What You'll Bring to Alcon

• Education: ITE
• 1-2 years of experience in manufacturing industry.

Why Join Us:

• Opportunity to work with a leading global medical device company.
• Collaborate with a diverse and talented team in a supportive work environment.
• Competitive compensation package and comprehensive benefits.
• Continuous learning and development opportunities.

• To handle M & E works within hotel building
• To manage on building Electrical, aircon, lighting, plumping and equipment service and maintenance
• Able to perform hand on Electrical & Maintenance works within Building
• To work according to the schedules and duties
• To handle duties assigned by Manager

Requirements

• NITEC / Higher Nitec in Electrical & Mechanical Engineering with 3 years of Building / Hotel Electrical Maintenance work experience
• Candidate must be able to perform 3 rotating shift work
• Working location at Orchard Area

The Role:

In this position, you will play a critical role in maintaining accurate documentation of incoming and outgoing deliveries within the data center. Your responsibilities will include conducting regular audits of equipment to ensure compliance with inventory controls and managing the movement of equipment using pallet jacks or other assisted lifting devices. Working within a ticket-based environment, you will also handle the secure destruction of data-bearing devices, such as hard drives and solid-state drives.

Additionally, you will oversee material movement, including shipping and receiving, while managing inventory. Your role will involve tactical management tasks during your shift, such as prioritizing ticket queues, resolving escalations, and addressing issues to ensure the seamless delivery of inventory and asset activities in line with Microsoft's internal policies and service level agreements. Flexibility to work non-standard hours, including weekends and holidays, is essential.

Ideal Candidate:

The ideal candidate will have at least six months of experience in inventory control, logistics, or warehouse management. You should be capable of frequent standing, walking, lifting, and working at heights, with or without equipment assistance. Effective communication skills are vital, as you will need to communicate clearly in both written and oral English to support regional and global teams. A strong desire to learn and develop new technical skills is also important for success in this role. Candidates with a diploma or degree in IT or Computer Engineering, along with a year of experience in IT support and monitoring, will be preferred, although fresh graduates with a positive attitude will also be considered.

Job Description for clinical trial project lead

• Oversee clinical trial projects from initiation to completion, ensuring all phases are executed efficiently and effectively.

• Handle various administrative tasks to support project activities and maintain seamless operations.

• Oversee the maintenance and calibration of clinical trial equipment

• Data entry and collection of clinical data

• Coordinate and schedule visits, as well as recruit study subjects to ensure the smooth progression of clinical trials.

**Requirements:**

- No prior experience required; training will be provided.

- Must possess at least an ITE/Diploma in any field.

- Entry-level candidates are encouraged to apply.

- Capable of working independently on challenging projects and meeting deadlines.

- Eager to learn, prioritize, and multi-task effectively.

- Strong coordination and interpersonal skills; comfortable interacting with people.

- Ability to function as both a leader and a team player.

*Please note that only shortlisted candidates will be notified. To apply, send your detailed resume with current and expected salary to [email protected].*

• 5 day work week

• Responsible for assembling and building prototypes

• Medical & Dental insurance & Quarterly Bonus.

 JOB DESCRIPTION

SIGMADESIGN is a fun, fast-paced engineering consulting company currently experiencing explosive growth. We are looking for an Assembly Technician. Curiosity, competency and confidence are a must.

Primary Function :

Responsible for assembling and building prototypes and products utilizing various tools in support of SIGMADESIGN’s engineering production and manufacturing activities. Occasionally provides support in the form of documentation and troubleshooting until units/parts are completed to acceptable test procedures and routing operations.

Essential Job Functions – Responsibilities :

• Performs processes to complete mechanical and electrical assemblies, subassemblies, electrical wiring, and wire harness assembly using common hand tools and electronic lab tooling.
• Tests functional performance of assembly and observes and records results.
• Assembles products according to routings and blueprints; measures parts to specified tolerances.
• Uses hand tools, chemicals and adhesives as needed.
• Maintains and monitors test equipment as necessary to ensure continued accuracy.
• Keeps production supervisors advised of work status, workload, problems and progress as related to work assignments.
• Demonstrate Technical Capacity, Learning Orientation, Time Management, and Thoroughness Skills.
• Maintain a clean and safe work environment including tools and assembly production areas.

Education and Experience: (Knowledge, Skills, & Abilities)

• Minimum NITEC in any Engineering discipline
• Minimum one year of recent direct or related experience required.
• Basic computer literacy skills, basic file structure understanding, and web navigation; working knowledge of Microsoft Office productivity tools including Outlook, Excel, and Word.
• Experience and ability reading and creating simple schematics; able to strictly follow engineering directions or procedures as required.
• Ability to multitask (make progress on multiple unrelated projects) and prioritize workload.
• Detail oriented with a focus on quality, execution and follow through.
• Hands-on skills and mechanical aptitude skills required.
• Excellent written and verbal communications skills.
• Strong basic math skills.
• Experience or familiarity with multimeters, oscilloscopes, and other typical electronic lab equipment a plus.

Work Environment:

Standard lab/production environment. Air-conditioned facility. Occasionally may be required to work in environmental conditions that emulate typical user environments in order to facilitate design testing and validation.

Compensation/Benefits:

• Salary will commensurate according to experience
• Profit Sharing
• Medical & Dental Insurance
• Paid Annual Leave

Click Apply Now for an interview!

Senior Lab Technician

Our client is a MNC chemical manufacturer company. They are currently seeking for Senior Lab Technician.

The role of the Senior Lab Technician includes:

·       Conducting of laboratory tests and samples and quality inspections assigned to them by the Supervisor.

·       Raw material process and finished product quality control analysis.

·       Advance maintenance, calibration and troubleshooting of assigned laboratory equipment.

·       Maintenance of chemicals and consumables inventory, preparation and standardization of chemical reagents and waste management.

·       Maintenance of quality records and development of quality procedures.

·       Calibration of equipment.

·       Conduct and contribute to risk assessment, Quality Procedures and Decision making on quality & maintenance.

·       Procurement of materials and budget controls.

·       Implementing QA & Safety Activities.

·       Any other duties as assigned.

Job Requirement:

·       5 years’ experience in conducting Manual Wet Chemistry or Manual Lab Testing.

Interested candidates, please send your detailed resume stating Past Employments, including Reasons of Leaving, Last Drawn Salary for the most recent 2 positions (breakdown of basic salary, allowance, bonuses etc), Expected Basic Salary and availability.

WE REGRET TO INFORM THAT ONLY SHORTLISTED CANDIDATES WILL BE NOTIFIED

Manfield Employment Services Pte Ltd (Lic. No: 95C2823)
Posting Personnel: Win Hui
EA Personnel Reg No.: R23115634

Kindly send in your latest job resume without your NRIC numbers and other ID numbers.

For job resume(s) that contain NRIC numbers and/ or ID details, it may not be processed and your job application may be rejected due to improper submission of job application details. Please refer to the advisory guidelines on the PDPA for NRIC numbers and other ID numbers.

By sending your job resume to us, it shall be deemed that you have agreed and hereby give your consent to MANFIELD in collecting, using and/ or disclosing your personal data for the purpose of accessing and processing your job application and/ or for future job opportunities within MANFIELD and/ or with the client(s) of MANFIELD. If you wish to withdraw your consent, please notify us. Kindly visit our company website for more information on the Privacy Policy.

Job Description:

• Manage and perform preventive maintenance on process plant equipment.
• Troubleshooting and repairing mechanical equipment during breakdown.
• Conduct routine inspections of equipment to ensure safe and operational plant equipment.
• Overhaul and service fans, blower, pumps, motor, compressor and other plant equipment.
• Record all maintenance and repair services performed.
• Perform any ad hoc duties as assigned.

Job Requirement:

• Good interpersonal and communication skill
• Good hands on maintenance skill in mechanical
• Willing to commit overtime and 12hrs shift work if assigned
• Added advantage if have experience in repairing heavy vehicle or big truck
• Company provides transportion pick up at different locations

AngelineMah
Reg No: R2096146
One Vogue Pte Ltd
EA License: 19C9629

Job Overview:

We are seeking a detail-oriented and reliable Pest Control Worker / Technician to join our team. In this role, you will inspect properties, identify infestations, and implement solutions to eliminate pests and prevent future infestations.

Key Responsibilities :

• Inspect residential and commercial properties to identify pest infestations.

• Determine the type of treatment required based on findings.

• Apply chemical and non-chemical pest control treatments following safety guidelines.

• Communicate with clients about the nature of the infestation, treatment options, and preventative measures.

• Prepare and maintain service records, including logs of treatments used and areas serviced.

• Monitor and follow up on treatment effectiveness, adjusting plans as needed.

• Ensure compliance with all health, safety, and environmental regulations.

• Maintain equipment and ensure proper storage of chemicals.

• Respond to emergency service calls when needed.

• Be a good team player

Requirements :

• 5.5 work week

• Minimum PSLE certification

• Valid driver’s license

• Experience in pest control industry will be an advantage

Benefits:

• Parking and mobile allowance

• Company-provided training and certification opportunities

• Vehicle, tools, and uniforms provided

Contract Aircraft Technicians

• Relevant Nitec/diploma qualifications in Aerospace Technology/ Aerospace Engineering/ Engineering (Aerospace)
• Minimum 5 years of working experience in the aviation industry as a full-time aircraft technician, excluding OJT (On Job Training), helper and assistant technician.
• Independent
• Proactive and keen interest to learn
• Willing to do 12-hour shift (Moring or Night) or rotating shifts,standby.

Roles & Responsibilities

1) Aircraft Technician (Cabin)

• Perform cabin maintenance of assigned aircrafts
• Perform Cabin Job as per OEM approved Repair Manual and Repair Disposition
• Assist LAE and Supervisory Lead to perform damage/repair assessment
• To perform basic airframe task as required to facilitate access removal for Cabin repair
• Required excellent tool maintenance and housekeeping practices.
• Carry out other reasonable duties within the overall function of the job as directed by the Supervisor
• Liaising with customers to ensure timely delivery of service
• To assist aircraft engineers & technician with regard to daily maintenance activities on the aircraft as assigned by Maintenance Supervisor.
• Handling of chemicals for work
• Maintenance and repairing of aircraft cabins.
• Maintain, repair and restore cargo compartments and its components.
• Able to carry out simple sheet metal repair and paint touch up in the aircraft cabin.
• Notify management of occurring deficiencies and faulty equipment

2) Aircraft Technician (A&C)

• Inspect and examine aircraft components for leaks, cracks or defects.
• Read and utilize maintenance manuals, ATA codes, illustrated parts catalogues, Airworthiness Directives, Service Bulletins and other maintenance documents to troubleshoot, repair, carry out maintenance and complete work assignments.
• Maintain, repair, aircraft structures, components, and parts such as wings and fuselage, rigging, hydraulic units, fuel systems, gaskets, and seals.
• Perform routine maintenance operations, such as the replacement of equipment’s and aircraft components.
• Interpret engineering drawings, specifications, or diagrams to conform during installation, maintenance or operation activities.
• Perform inspections to check for cracks, oil leaks, burned areas, foreign object damage, warping, distortions, missing segments and wear
• Complete all tasks in the allotted time frame and to the quality standards of our company, our customers and the Regulatory Authority.
• Promote safety and quality within the workplace ensuring all tasks are performed within the technical manual procedures, and communicate with other technicians, supervisors and licensed aircraft maintenance engineers to coordinate repairs and keep apprised of safety concerns
• Order supplies, equipment, materials and parts for repairs and general maintenance
• Keep detailed maintenance records of the inspections performed, repairs performed, maintenance procedures and ordered parts.

3) Aircraft Technician (Avionics)

• Install electrical or electronic components, assemblies and systems in aircraft.
• Lay out installation of aircraft components, following documentation such as aircraft manuals and wiring diagrams.
• Set up and operate ground support and test equipment to perform functional flight tests of electrical and electronic systems.
• Test and troubleshoot malfunctioning aircraft systems according to aircraft manuals.
• Test and troubleshoot instruments, components, and assemblies, using circuit testers, oscilloscopes, or voltmeters.
• Test electrical equipment or systems to ensure proper functioning. Troubleshoot equipment or systems operation problems.
• Install, inspect, test, adjust, or repair avionics equipment, such as radar, radio, navigation, and missile control systems in aircraft.
• Complete all tasks in the allotted time frame and to the quality standards of our company, our customers and the FAA.
• Promote safety within the workplace by monitoring others and yourself to guarantee all tasks are performed within the safety manual guidelines, and communicate with other mechanics and supervisors to coordinate repairs and keep apprised of safety concerns.
• Keep records of maintenance and repair work. Maintain repair or maintenance records.
• Order supplies, equipment, materials and parts for repairs and general maintenance.
• Keep detailed records of the inspections performed, repairs finished, maintenance procedures and ordered parts.
• Carry out servicing (Before Flight/Turn Round/After Flight inspection), schedule servicing, and troubleshooting and defect rectification on military aircrafts.
• Support daily production and deployable to outstation project works when necessary.
• Inspection of parts from suppliers conforming to stated specifications.

4) Aircraft Technician (Sheetmetal)

• Able to repair, perform maintenance checks and modifies the full range of aircraft structural components and body structures as per SRM
• Experience in identifying structural/airframe defects and determining the repairs required.
• Knowledgeable in repair work (component repair/sheetmetal structure) as per SRM/CMM
• Able to fabricate airframe sheet metal parts, subsystem assemblies’ components.
• Able to identify, remove and manage aircraft corrosions while ensuring aerodynamics smoothness.
• Comfortable in using equipment/tools/machinery.
• Able interpret and use engineering drawings.
• Able to repair, perform maintenance checks and modifies the full range of aircraft structural components and body structures.
• Experience in inspecting defects and determining the repairs required.
• Able to fabricate airframe sheet metal parts, service aviation, subsystem assemblies’ components and perform operational checks to ensure aircraft is in line with regulations and safety requirements.
• Able to identify, remove and manage aircraft corrosions while ensuring aerodynamics smoothness.
• Comfortable in using precision equipment/tools/machinery.

5) Aircraft Technician (Engine)

• Perform disassembly/ assembly of engine/ module for repair and overhaul Install engine components onto the engine/ module Perform troubleshooting, modification and maintenance works
• Relevant technical certificate Experience in aviation industry
• Interpret blueprints, specifications, or diagrams to inform installation, development or operation activities.
• Perform hourly, daily and monthly inspections to check for cracks, oil leaks, burned areas, foreign object damage, warping, distortions, missing segments and wear
• Complete all tasks in the allotted time frame and to the quality standards of our company, our customers and the FAA.
• Promote safety within the workplace by monitoring others and yourself to guarantee all tasks are performed within the safety manual guidelines, and communicate with other mechanics and supervisors to coordinate repairs and keep apprised of safety concerns
• Order supplies, equipment, materials and parts for repairs and general maintenance
• keep detailed records of the inspections performed, repairs finished, maintenance procedures and ordered parts.

6) Aircraft Technician (Composite)

• Performs repairs of aircraft leading edges including boot replacement, floor panels, and composite repairs
• Ensures safety rules and regulations are complied with always.
• Perform minor and complex structural repairs on components detached or attached to aircraft including, but not limited to flight controls, doors, engine inlet and cowlings, stabilizers, radomes and horizontal to vertical stabilizer close-out fairings at on-site or off-site locations
• Ensure parts are repaired according to Airworthiness and Aircraft Manual
• Identify unserviceable parts and initiate parts requisitions
• Ensuring working areas are kept clean and free of all hazardous equipment
• Tools and equipment under his/her control are properly maintained, calibrated and correctly used for the jobs.

7) Aircraft Technician (Painter)

• Painting of aircraft components detached or attached to aircraft including, but not limited to flight controls, doors, engine inlet and cowlings, stabilizers, radomes and horizontal to vertical stabilizer close-out fairings.
• Vapour degreasing and masking process.

8) Aircraft Technician (Planner)

• Planners will have an entire aircraft assigned to them at any one time, he/she must be able to work independently He/she has to monitor a project's status to ensure that timelines are met and that client/customer needs are taken care of promptly
• Ensure the completion of aircraft maintenance job cards for smooth line maintenance operations
• Create maintenance schedules, individual releases and maintains work orders.
• To assist in preparing all the necessary documentation required in an aircraft project.
• To manage the dock control room during aircraft maintenance, administrate the related documentation, and account for all the worksheets applicable to the aircraft project.
• To perform data input and update of aircraft work records.
• To assist other departments for services related to the aircraft project.
• Monitor the compliance requirements of the checks and its associated tasks
• Review & schedule all maintenance tasks and preparation of Works Program.
• Develop & provision for material & tooling requirement and co-ordinate with other operational departments for smooth tasks execution.
• Implement and track approved modification programs.
• Coordinate with the MRO on the completion of tasks and follow-up with any discrepancies or issues.
• Support issuance of adhoc assignments and any other duties as assigned by his/her supervisor.

Duties:

· Installs, inspects, maintains, and repairs various types and brands of equipment.

· Performs regular preventive maintenance and corrective works on equipment.

· Diagnoses electrical and mechanical defects and malfunctions.

· Prepare service/defect report to appraise higher management.

· Perform site walks to confirm existing conditions and layout to facilitate placement and/or installations.

· Liaison and coordination work with both internal and external parties when required.

· Prepare for and coordinate all on-site activities.

· Assist in electrical and plumbing works as required.

· Performs calibration work.

· Maintain systematic documentation and filing for the department.

· Provide administrative duties as instructed by superior.

· Any other duties as assigned by superior and the Management.

Requirements:

· At least 1 year experience in machineries maintenance and technical work.

· Able to handle electrical and plumbing works.

· Experience in dishwasher machines would be an added advantage.

· Able to perform late night duties (9.30-12am)

If keen, write in to [email protected] or apply via this platform today!

Joining Arup

Arup’s purpose, shared values and collaborative approach has set us apart for over 75 years, guiding how we shape a better world.

The BIM Technician will in conjunction with other Senior Leaders of the office, the development of the overall CAD/BIM capability in the Structures team within Group 1 in Singapore.

The Opportunity

• Modelling, Drawing Production and Quality control
• Training, software, hardware
• Client links. Industry links. Regional and global links
• Project setup and Technical Support
• Senior BIM modelling project role

At Arup, you belong to an extraordinary collective – in which we encourage individuality to thrive. Our strength comes from how we respect, share and connect our diverse experiences, perspectives and ideas.

You will have the opportunity do socially useful work that has meaning – to Arup, to your career, to our members and to the clients and communities we serve.

Is this role right for you?

• Strong CAD/BIM technical background and a strong interest, desire or working knowledge of BIM processes and software.
• Minimum 5 years of relevant experience with Professional Qualification with substantial knowledge and experience in Civil and Structural engineering
• Experience in managing key projects, including the management of multi-disciplinary project teams and ability to undertake complex designs.
• Substantial experience in the consulting engineering environment, including the ability to advise clients on cost-effective, sustainable solutions.
• Working knowledge of at least one main 3D BIM product, including configuration, setup and management

What we offer you

At Arup, we care about each member’s success, so we can grow together.

Guided by our values, we provide an attractive total reward package that recognizes the contribution of each of our members to our shared success. As well as competitive, fair, and equitable pay, we offer a career in which all of our members can belong, grow and thrive – through benefits that support health and wellbeing, a wide range of learning opportunities and many possibilities to have an impact through the work they do.

We are owned in trust on behalf of our members, giving us the freedom, with personal responsibility, to set our own direction and choose work that aligns with our purpose and adds to Arup’s legacy. Our members collaborate on ambitious projects to deliver remarkable outcomes for our clients and communities. Profit Share is a key part of our reward, enabling eligible members to share in the results of our collective efforts.

Please see a list of Arup’s Singapore benefits below:

• Hybrid working policy & flexible working hours
• 13th month bonus
• Birthday leave
• Paid parental leave for birth mothers 16 weeks & new parents (excluding birth mothers) 4 weeks
• Purchase Additional leave of up to 20 days (permanent employees)
• Paid Annual subscription to relevant Professional association.
• Reimbursement of Professional Engineers application and examination Fees
• International mobility opportunities
• QP allowance
• Site Allowance
• Work related travel insurance
• Dental expense cover
• Marriage leave (3 days)
• Examination leave (2 days)
• Family care leave
• Bike Loans of up to SGD2000

Different people, shared values

Arup is an equal opportunity employer that actively promotes and nurtures a diverse and inclusive workforce. We are an open environment that embraces diverse experiences, perspectives, and ideas – this drives our excellence.

Guided by our values and alignment with the UN Sustainable Development Goals, we create and contribute to equitable spaces and systems, while cultivating a sense of belonging for all. Arup provide an environment where you will make a positive difference. Discover more about life at Arup at www.arup.com/careers/your-life-at-arup.

We are committed to making our recruitment process and workplaces accessible to all candidates. Please let us know if you need any assistance or reasonable adjustments throughout your application or interview process, and/or to perform the essential functions of the role. We will do everything we can to support you.

Our Application Process

Please apply directly through our applicant tracking system. Shortlisted candidates will be contacted by Talent Acquisition to discuss next steps. Stay safe online – Arup will never ask for your bank details as part of our recruitment process.

Arup does not accept unsolicited resumes from recruiters or employment agencies.

The Role:

· Support the deployment of physical infrastructure within the data center.

· Install, replace, and troubleshoot cables and hardware.

· Handle data-bearing devices (e.g., hard drives, solid-state drives).

· Operate within a ticket-based support environment.

· Move equipment using pallet jacks or other assisted lifting devices.

· Assist the Data Centre Inventory and Asset Management Team (DIAT) with shipping, receiving, and inventory management, especially during high-volume periods.

· Flexibility to work non-standard business hours, including weekends and holidays.

Ideal Candidate:

Education / Experience:

· Diploma or Degree in IT, Computer Engineering, or a related field.

· Minimum 1 year of experience in IT Support & Monitoring (Fresh graduates with a positive attitude are welcome to apply).

Skill Sets:

· Basic understanding of computer hardware and components.

· At least 6 months of experience handling or maintaining technical equipment or machinery.

· 1+ years of experience supporting IT equipment or related technologies.

· Relevant certifications such as CompTIA A+, Server+, or Network+, and Basic Structure Cabling (BSC) are a plus.

· Ability to support frequent standing, walking, lifting, and working at heights, with or without equipment assistance.

· Effective communication skills.

· Proficiency in written and oral English to support regional and global teams.

· A strong desire to learn, grow, and develop new technical skills.

Our client is a well-established MNC, market leader in the Pharmaceuticals industry. They are looking for a Process Technician to assist their team for the next phase of their business. They are located in the West – easily accessible.

Note: This is a 1-year contract, convertible and renewable.

Responsibilities:

• Adhere to company’s guidelines while operating and overseeing manufacturing machinery, promptly addressing any alerts during production
• Manage materials used in production and undertake cleaning and sterilization duties within the workplace
• Responsible for the daily functions/operations of designated manufacturing machinery
• Store materials in accordance with the prescribed company’s protocols
• Record/Maintain data in the company’s inventory management system
• Gather the necessary materials, equipment, and solutions for cleaning and sterilization
• Conduct both manual/automated cleaning and sterilization of machinery, containers, and workplaces
• Conduct calibration and pre-operational checks on manufacturing equipment, following the standard protocols
• Operate machinery equipment for filling and packaging purposes
• Identify/Resolve packaging quality issues, implementing the corrective measures as required
• All other adhoc duties as assigned

Requirements:

• Minimum Nitec/Diploma in any relevant fields of Engineering
• Minimum 1 year of relevant working experience

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

This client company specialized in Precision Surface Finishing Equipment.

Job Highlights

• Location: Ang Mo Kio
• Working days: Monday to Friday
• Working Time: 8.30am to 6.15pm
• Benefits: AWS & Bonus included

Job Responsibilities:

• Perform Lapping / Polishing process, machine installation and training

Job Requirements:

• Min. Higher NITEC / Diploma in Electrical or Mechatronics discipline graduates or any technical qualification in Precision Engineering
• Knowledge of Mitsubishi or Siemens PLC is added advantages
• Preferred candidates with min 2-3 Years Working Experience in Precision Engineering machine operation or machinery servicing
• Training will be provided
• Can read technical drawing
• Able to use the measuring tool example micrometre, height gauge, CMM
• Any knowledge on using Auto Cad

Goldwind Services Pte Ltd

Audio Video Officer/Technician

Bounavista Area (Mon -Fri, Half Saturday)

Job Description & Requirements

We are needing a reliable and experienced Audio Video Technician Officer who has good working attitude.

· Customer meetings as required by client

· Experienced in the same field at least 1 year

· To provide schedule studio slots as and when needed

· Knowledgeable to conferencing applications like webex, team meetings

· Specialised input devices

· Provide assistance throughout the sessions and present at the studio or meeting room

· Can do technical support, set up and maintenance

· Troubleshooting assistance when system doesn’t works

· To do installation/ updating of the new software

· To raise tickets, support team and to contact relevant vendors

· Assist handyman works

BENIFITS:

Uniform Provided

Year end Performance Bonus

Waking distance to mrt and bus

Annual leave and medical benefits provided

Our client is from Oil and Gas industry, a local leading player. They are looking for a Maintenance Technician for the next phase of their business. They are located in West.

Duties:

• Perform preventive, predictive, and corrective maintenance tasks as directed, and update the CMMS database.
• Maintain rotating and static equipment, plant piping, and structural support systems.
• Respond to and resolve equipment malfunctions, ensuring minimal downtime.
• Determine necessary materials, tools, and methods for safe maintenance tasks.
• Conduct machinery condition monitoring and field data collection with the production team.
• Ensure operational efficiency of all plant valves and mechanical components, including control and plant valve maintenance.
• Supervise in-house contractors and vendors, ensuring safety protocols are followed.
• Collaborate with the production team on mechanical system testing and troubleshooting.
• Take on additional tasks or responsibilities as assigned.
• Perform valve line-up and LOTO for maintenance preparations.
• Participate in the Company's Emergency Response Team (CERT) with assigned roles.

Requirements

• Nitec in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in troubleshooting of mechanical/ machinery systems

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description

• Inspect and repair passenger seats, galleys, and lavatories and maintain aircraft conditions
• Install cabin interior components into commercial aircraft, including seat tracks, overhead bins, galleys, side panels, bulkheads, etc.
• Maintain luggage storage area in a neat and organized manner
• Maintain inventory items required for handling the cleaning activities
• Maintain the quality of the aircraft interiors on the operated fleet
• Maintain the interior and exterior cleaning standards on the operating fleet
• Perform other duties as assigned by your superior

Job Requirements

• Minimum 'O' Level / Nitec in engineering or equivalent.
• No working experience is needed
• Able to communicate effectively verbally in writing in standard English.
• Ability to perform tasks in high-noise areas and work at height
• Able to work rotating shifts, including weekends and public holidays.
• Candidate must attend a 6- to 9-month Cabin Trainee Technician course (including On the Job Training) with assessment. Only those who pass the assessment will be offered employment for the role.