Profile Summary:

The Senior Systems Engineer supports security systems and operations administration, monitoring and maintenance. Monitors security alerts and events. Collects and documents contextual information based on established practices and supports the preparation and publishing of security advisories. Assists with the analysis of security-related information and events, escalation of incidents for validation and remediation.

Able to be alert and vigilant in performing monitoring activities, and is able to analyze and resolve security-related issues critically. He/She communicates clearly in his/her interactions with others and coordinates effectively with his/her team to perform security operations.

Roles & Responsibilities:

Monitor security systems

• Perform non-routine security monitoring activities

• Perform prioritization and allocation of security incidents

• Track security monitoring rules and alerts

• Compile regular reports on the performance of security operations

Maintain security operations

• Assist with the implementation of agreed security system changes and maintenance routines

• Assist with implementation of new security programs

• Support vulnerability, penetration testing and assessments

• Support the development of reports on security penetration testing results

• Recommend security products, services and/or procedures

• Support the alignment of security systems with established service agreement standards

• Support the implementation of new enterprise security architecture, technologies and enhancements

Respond to queries

• Support live response to security issues

• Support investigation of security breaches such as forensic threat investigation

• Support the resolution of security related issues

• Support the simulation of user problems to identify security system drawbacks

• Recommend security system modifications to reduce user problems

Facilitate compliance

• Assist with the implementation security policies, procedures and programs

• Educate users on the security standards and practices

• Identify improvement areas to existing security policies and procedures

• Deliver user training

Optimize security system performance

• Support piloting of new tools, technologies, and processes as well as installation of hardware and software

• Support security system testing and ongoing optimization or changes such as scheduled upgrades and updates

• Maintain documentation of all optimization activities

• Suggest improvements to operational processes, procedure manuals, and documentation

Requirements/ Qualifications:

• Minimum Bachelor in Computer Science or equivalent
• 2-3 years of relevant experience
• Experience in firewall, network scanning or asoc
• Possessed Risk assessment experience
• Required to be on standby with on-call availability with varied shifts including nights, weekends and holidays.
• Experience in AD/ID administration as per best security practices
• Exposure in IM8 or equivalent

Why choose Logicalis?

As Architects of Change, Logicalis' focus is to design, support and execute clients' digital transformation by uniting their vision with their technology expertise and industry insights. The company, through its deep understanding of key IT industry drivers such as security, cloud, data management and IoT, can address customer priorities such as revenue growth and business, operational efficiency, innovation, risk and compliance, data governance and sustainability.

We strengthen our purpose: to design, support, and execute our customers' digital transformation by converging their vision with our technological expertise and knowledge of the industry. The brand refresh underpins both the evolution of Logicalis’ positioning as well as our strategic vision for growth.

Responsibilities:

• Implementing network and security solutions: Responsible for implementing network and security solutions for clients, which may involve configuring routers, switches, wireless, load balancers and other network devices like Aruba. Racking and Stacking network devices. Expected to handle small to mid-sized project.
• Troubleshooting network and security issues: Responsible for diagnosing and resolving network and security issues that arise for clients while deploying, which may involve investigating connectivity problems, configuration issues, and analyzing network traffic.
• Client management: Responsible for building and maintaining relationships with clients, managing their expectations, and ensuring their needs are met.
• Collaboration with other teams: Working closely with other teams such as project managers and Operations team to ensure the network and security delivery is completed within the stipulated time.
• Technical Documentation: Responsible for creating technical documentation such as Low-Level Design, TDS, As-built, UAT and SAT documents. Signoff all the documents from clients for the project closure.
• Knowledge Transfer: Responsible for providing handover the project to client and internal operations team.

Requirements:

• Possess at least a Diploma, Bachelor's Degree, or Professional Degree in Computer Science/Information Technology or equivalent
• Minimum 1-5 years of experience in network design/deployment.
• Excellent knowledge in Routing and switching, eg. BGP, OSPF, Multicast, VSS, spanning tree, MPLS L3VPN.
• Experience in wireless. Cisco WLC, Aruba, Prime, MSE/CMX, DNAC, Ekahau Site Survey tool
• Data centre technologies, eg. Cisco Nexus VDC, VPC, FEX, VXLAN, ACI.
• Good knowledge of Firewall technologies eg. IPSEC VPN, SSL VPN, IPS/IDS, Cisco ASA, Firepower, Fortigate,
• Good knowledge in network access control(NAC) product, eg Aruba Clearpass Policy Manager, Cisco ISE.
• Excellent interpersonal & communication skills
• Current CCNA/CCNP qualified with related professional experience, CCIE would be an advantage.

Interested applicants please submit your application with your expected salary and notice period to be considered for the role. We regret that only shortlisted candidates will be notified.

As part of any recruitment process, we collect and processes personal data relating to job applicants. We are committed to being transparent about how we collect and use that data and to meeting our data protection obligations. By applying to this post and sending us your resume, you agree to the collection, use and/or disclosure of your personal data in the manner as set out in our Data Protection Notice for Job Applicants which can be found

Logicalis is committed to protecting your privacy.

Click below to view the data protection notice.

https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

Project Overview

The AMR IRG is an interdisciplinary community of biologists, engineers, and clinicians from MIT and Singapore, sharing a state-of-the art research facility and united by a commitment to providing a supportive intellectual environment where students and staff can learn, grow, and contribute to solving a pressing societal problem.

The objective of this project is to advance the field of RNA analysis by developing and implementing innovative analytical tools. These tools will be used in a comprehensive study of all forms of RNA -- the ribonucleome -- and the >170 RNA modifications -- the epitranscriptome -- in disease pathobiology, host-pathogen interactions, biomarker development, and therapeutic target discovery.

Responsibilities

The Research Engineer will plan and conduct experiments with the aim of studying the roles of RNA modifications in human immunue diseases. The candidate will work primarily on cell culture, RNA isolation, and chromatography-coupled mass spectrometry analysis. As part of this work, the candidate will prepare results for publication, be a liasion with the AMR IRG community, work with external collaborators, and develop strong experimental and communication skills.

Requirements

• B.S. or M.S. in biochemistry, molecular & cell biology, bioengineering, chemical engineering, or a related field.
• Experience in cell culture, RNA extraction, high-performance liquid chromatography or mass spectrometry are prefered. Strong proficiency in oral and written communication in English. Ability to work well with others and as part of a team.

To apply, please visit our website at: https://portal.smart.mit.edu/careers/career-opportunities

Interested applicants are invited to send in their full CV/resume, cover letter and list of three references (to include reference names and contact information). We regret that only shortlisted candidates will be notifie

Responsibilities:

• Performs the set-up, calibration, testing and troubleshooting of circuits, components, instruments and mechanical assemblies
• Determines and may develop test specifications, methods and procedures from blueprints, drawings and diagrams.
• Tests and troubleshoots assemblies and/or final systems. May complete rework on assemblies and/or systems as a result of testing.
• Prepares technical reports summarizing findings and recommending solutions to technical problems.
• May assist in the selection and set-up of specialized test equipment.

Requirements:

• Diploma or Bachelor Degree in Engineering.
• Ability to read technical drawings/procedures and use a variety of precision testing and measuring instruments.
• Previous hands-on experience with semiconductor equipment
• Experience with optics alignment will be adventagous
• Strong troubleshooting and analytical skills to resolve technical problems, set up experiments, and perform data analysis.
• Excellent communication, teamwork, and people skills are required.
• Comfortable working in shifts and cleanroom environment

Job Purpose:

The Sales Engineer is responsible for driving the revenue growth of his / her portfolio within the SEA region for both the advanced materials (coating services) and the industrial equipment business units.

Responsibilities:

• Participate in the formulation and drive execution of the sales and marketing strategy within the SEA region (Singapore, Malaysia, Thailand, Indonesia, Vietnam, Philippine, Indonesia) to deliver sales revenue growth within the 3 years business plan.
• Actively collaborate in collaborative market research into regional markets to identify clear target customers with defined market segments and application groups defined in the strategy.
• Lead and drive strategic sales initiatives for the SEA region, collaborating with the required internal resources to identify and acquire qualified leads and ultimately create new opportunities. These initiatives will include sales campaigns (personal selling, LinkedIn, etc), exhibitions, seminars etc.
• Lead and cultivate strong customer relationships with all key customers and key business opportunities. Engage and develop key stakeholders on the customer side and devise clear plans to drive opportunities through the sales process to win business.
• Opportunity Management: manage all opportunities with a clear roadmap through the sales process, managing where necessary projects with clear objectives, goals, milestones, and timelines to win customer business.
• CRM: Work professionally within the CRM tools / framework to ensure best practices in customer relationship management.
• Solutions & Product knowledge: continuously develop a deep understanding of the markets, applications, solutions, and product portfolio of Nanofilm and its target customers.
• Business responsibility to define with management the most relevant business model / offering to our customers, to balance the strategy of Nanofilm and to meet customer needs to win business.
• Negotiation skills to navigate customer negotiations on all business and contractual topics such as NDA, Sales Contracts, Negotiation commercial terms, etc.
• Reporting, providing regular reports on status, progress, and planning for the S&M activities in the region. Including forecasting, monthly updates, etc.

Requirements:

• Bachelor's in engineering Discipline
• 3- 5 years minimum experience in B2B Materials Technology and related industries
• Aggressive in meeting sales targets and results- driven.
• Confident, independent, target-driven, and goal-oriented with a proactive approach to generating and converting prospects into actual sales.
• Excellent communication skills and competitive sales approach
• High degree of commercial acumen matched with a strong customer-focused approach.
• Knowledge of International business practice and regulation has an added advantage.
• Ability to assimilate and understand technical information regarding vacuum coating technologies and sell on technical capabilities.
• Strong analytical skills to evaluate market opportunities and benchmark competitors technically and commercially.
• The initial work location will be at 28 Ayer Rajah Crescent. The company is scheduled to relocate to the HQ office at 11 Tai Seng Drive in 2025.

About your role

• Lead the design and development of cutting-edge 3D machine vision systems tailored for industrial robotic use cases, ensuring high precision and performance.
• Collaborate closely with cross-functional teams, including robotics engineers and software developers, to integrate 3D machine vision technology seamlessly into robotic applications.
• Oversee the integration of 3D sensors with robotic systems, optimizing their performance and accuracy.
• Develop and refine algorithms for data acquisition, image processing, and object recognition to enable advanced visual perception capabilities for robotic systems.
• Troubleshoot and debug technical challenges related to machine vision technology, ensuring robust and reliable operation within industrial environments.

Requirements:

• Bachelor’s or Master’s degree in Computer Science, Engineering, or a related field.
• Significant experience in the design and development of 3D machine vision systems, particularly in industrial or robotic applications.
• Proficiency in programming languages such as Python, C++, and experience with relevant libraries and frameworks.
• Strong knowledge of 3D sensors, as well as processing and manipulation of point cloud and mesh.
• Problem-solving skills and the ability to work collaboratively in a multidisciplinary team environment.
• Excellent communication skills to effectively convey technical concepts and insights to both technical and non-technical stakeholders.

Responsibilities

• Assist project manager to manage projects from initiation through completion, ensuring timely delivery within budget
• Coordinate with internal team and external stakeholders to ensure seamless project execution
• Oversee the design, implementation, and integration of control systems, SCADA systems, and Programmable Logic Controllers (PLCs) to meet client requirements
• Prepare and review project documentation, including project plans, specifications, technical drawings, and operation manuals
• Conduct site surveys, Factory Acceptance Test (FAT), Site Acceptance Test (SAT), and commissioning activities at client sites
• Troubleshoot and resolve issues related to system performance, hardware and software integration
• Ensure adherence to safety, quality, and regulatory standards in all projects activities
• Provide technical support and training to clients and end-users during the implementation and handover phases
• Liaise with suppliers and subcontractors to ensure delivery of materials and services on time
• Assist in preparing technical proposals and cost estimates for new projects

Requirements

• Diploma or Degree in Electrical Engineering, Control Systems Engineering or related fields
• 2-5 years of experience in project management, automation, and control systems, preferably in industries such as water treatment, oil & gas, manufacturing, or infrastructure
• Strong knowledge of SCADA, DCS PLC programming
• Familiar with communication protocols like Modbus, DNP3, and OPC
• Hands-on experience with field commissioning, testing, and troubleshooting
• Strong project management skills, including plannings, scheduling, budgeting and resource management
• Excellent communication and interpersonal skills to manage client relationship and work in a team-oriented environment
• Professional Certificate holders in PMP or Certified Automation Professional is a plus

• Recognised degree in civil engineering, construction management or related field.
• Minimum 5 years of experience in construction planning and preferably in MRT or large scale infrastructure projects.
• Profeciency in construction progress planning, data analysis and using BIM software such as Primavera P6, AutoCAD, Navisworks, Power BI & etc.
• Strong understanding and knowledge of tunnelling and underground construction and cut and cover technigues.
• Proven ability to analyse critical paths, manage project timelines and adapt plan effectively.
• Monitor project progress and adjust plans as necessary to mitigate risks and meet deadlines.
• Preparation of progress reports by forecasting and identifying delays and bottlenecks.
• Familiarity with ERSS walls, pile extraction, contaminated ground, railway protection requirement, WSM and large diameter bored tunnels.
• Able to work under pressure and manage multiple priorities.
• Applicants are required to submit their detailed CV and indicate the current and expected salary.

At Sulzer, you are empowered to deliver superior results. As a pioneer in industry we have a proud heritage of innovation and continue to evolve for the future. Join our story and create your own impact by developing your expertise and building solutions that help make our lives safer, smarter and more sustainable.

In this role you will be accountable for:

• Design and conduct bench-scale test and pilot testing related to the company's separation process technology. Some tests may required rotating shift schedule.
• Develop and review validation protocols for bench-scale test and pilot testing
• Investigate and resolve discrepancies identified during bench-scale test and pilot testing
• Collaborate with process engineers to develop new technologies and improve existing ones
• Work with the sales team to develop commercialization strategies for new technologies
• Stay up-to-date with industry trends and emerging technologies related to separation processes

To succeed in this role, you will need:

• Degree in Chemical engineering, Biochemical engineering, Environmental engineering or related fields
• 2 to 5 years of analytical testing experience in pharmaceutical, petrochemical or flavor and fragrance environment.
• Knowledge of separation processes such as distillation, liquid-Liquid extraction, and crystallization.
• Experience designing and conducting bench-scale tests and pilot testing, as well as experience developing and reviewing validation protocols is an advantage.
• Basic knowledge and experience in analytical chemistry, including experience with various analytical equipment is an advantage.
• Awareness for safe handling of chemicals, potentially dangerous materials and equipment.
• With process engineering background are welcome to apply.

Sulzer is an equal opportunity employer, committed to the strength of a diverse workforce.

83% of our employees recommend Sulzer as a good place to work and we are proud to be recognized as a Top Employer 2023 in Brazil, China, Switzerland, United Kingdom and United States. So come and join our story, starting today!

SALARY:

Junior - ($4,200-$5,000)

Senior - ($5,000-$6,000)

LOCATION:

Ang Mo Kio / Yio Chu Kang / Central

Job Description

•Manage & Lead the electrical team.

•Perform engineering duties such as design, engineering calculations, planning, tender.

Preparation/evaluations as part of the engineering project team

•Team development

•QA/QC documentation review of engineering deliverables

•Liaison with clients, project managers, architects, contractors

•Resolve any technical problems faced during project design and/or construction stages

•Suggests ways to increase revenues and efficiency.

•Testing & Commissioning of the ACMV Electrical Systems.

•Ensure the team follows all electrical codes and standards.

Job Requirements

•Any qualification in a relevant engineering field with minimum 5 years of related working experience

in the Construction Electrical Field associated with ACMV / Electrical.

•Engineering design of commercial buildings, major infrastructure transportation projects and

mixed-use developments

•Possess design experience and good understanding of ACMV / Electrical technical systems and

procedures:

•Possess knowledge on all cabling, loading and sizing calculations and equipment selections such as

cable, generators, panels, etc.

•Develop, design through establishing, design briefs, design reports, calculations, schematics,

schedules, specifications, concept, Preliminary, Detailed and Construction Engineering Designs

•Productions of drawings and developing models

•Site Experience, Testing & Commissioning Experience

•Having experience working with Infrastructure Projects would be an added advantage.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

EA Personnel.: Chan Jun Wei

EA Registered no.: R1543992

Recruit Now Singapore Pte Ltd

EA License no.: 21C0845

Job Summary:

• Provide 1st and 2nd Level IT Support to end-users
• Manage IT assets through procurement, tracking, maintenance, refresh /renewal and disposal/ termination.
• Provide assistance in the implementation of new end-user computing technologies.

Job Scope:

• Design, deploy, and manage security solutions such as firewalls, IDS/IPS, and encryption technologies.
• Conduct security audits, compliance checks such as vulnerability assessments with risk analysis
• Development and enforcement of security policies, procedures and controls
• Integrate security measures into new and existing IT systems and applications.
• Ensure that applications are securely configured, including hardening default settings, securing APIs, and restricting file permissions.
• Conduct initial investigations of security violations/incidents, and escalate as necessary
• Collaborate with other IT teams to ensure security is integrated across all systems and processes.
• Stay updated on the latest security trends & technologies
• Design, deploy, and manage security solutions such as firewalls, IDS/IPS, and encryption technologies.
• Work with other contractors where required for delivery of network services
• Any other IT duties as assigned.

Special Aptitude And Knowledge

• Advanced technical knowledge of security technologies and systems.
• Expertise in firewall administration, encryption technologies, and network protocols.
• Experience in designing and implementing security architectures.
• Proficiency in vulnerability assessment tools and penetration testing methodologies.
• Able to communicate well, handle documentation and explaining network and IT architecture
• A great team player and able to work well with other team member

Qualification

• Recognized Degree in Information Technology, Computer/ Network Engineering or equivalent.
• Possess relevant certifications such as CISSP, CCSP, CEH, or advanced security certifications
• Minimum 5 years of experience in an equivalent role.
• Experience with a company that has achieved CyberTrust Mark certification or has actively worked towards it is a bonus.
• Familiarity with implementing security measures in the healthcare industry is also advantageous.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible to deliver robust and efficient semiconductor manufacturing process with data driven analytics and systemic problem-solving skills in the respective modules: Etch (Dry Etch and Wet Etch); Photolithography; Diffusion; Chemical Mechanical Planarization (CMP); Chemical Vapor Deposition (CVD) or Physical Vapor Deposition (PVD)

Key Responsibilities

• Maintain smooth daily manufacturing operations and problem solve issues promptly
• Actively collaborate with equipment and material suppliers and partners to identify technology deficiencies; develop, evaluate, and validate corrective and preventive solutions
• Qualify and sustain manufacturing processes to scale up capacity swiftly and maintain with quality and urgency
• Continuously improve process stability and capability, enhance quality, reliability, yield, productivity, and safety standards
• Design and execute experiments, analyze complex data sets, and derive actionable insights to optimize manufacturing processes and precise controls
• Implement statistical process control methods to establish and uphold robust manufacturing processes

Education Qualification & Essential Experiences

• Bachelor’s or higher degree in Electrical and Electronics Engineering, Chemical Engineering, Material Science, Physics or STEM related fields
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The Candidate will be working on dynamic modelling and simulation of the powertrain of a full electric tug vessel, mainly using MATLAB/Simulink. The simulation models will be used to investigate the steady state and transient behaviour of the ship’s electric propulsion system.

Key Responsibilities

• Development of dynamic models of the ship’s electrical propulsion system including energy storage systems.
• Investigate steady-state and transient behaviours of an all-electric ship’s electrical system in various operational scenarios.
• Carry out mission-specific electrical power consumption analysis
• Electrical propulsion and ESS design optimization.
• Any other duties as assigned by the supervisor.

Job Requirements

• Bachelor's Degree or above in the areas of Electrical Engineering, Mechanical Engineering or Marine Engineering
• Other relevant disciplines are welcome to apply
• Background in programming languages and related research project experience is ideal

Job Description

• Optimize Shopee Ads core advertising strategies, such as traffic selection, smart bidding, ranking strategies and auction mechanisms.
• Provide solutions to long-term challenges like cold start, stability, and ecosystem development for the platform.
• Participate in the development and iteration of Ads algorithms by using Machine Learning.
• Enhance the efficiency of automated delivery products, combining intelligent product selection with full-chain optimisation to improve ads performance.
• Deeply understand buyer and seller demands to create incentive-compatible, mutually beneficial advertising strategies and products.
• Continuously improve the monetisation efficiency and user experience of Shopee’s advertising products, increase monetisation efficiency and driving the healthy, sustainable development of Shopee advertising

Requirements

• At least 3 years of relevant experience in algorithm-related roles
• Minimum 2 years of hands-on experience in one or more of the following areas: machine learning, recommendation systems, computational advertising, pattern recognition, data mining, or artificial intelligence.
• Hands-on experience with machine learning frameworks such as PyTorch, TensorFlow.
• Bachelor’s degree in Computer Science, Engineering, or a related technical field, or equivalent practical experience.
• Strong communication skills, collaborative team spirit, and a product-focused, data-driven mindset.
• Experience in ecosystem construction, monetisation efficiency, or mechanism design is preferred
• Prior experience in e-commerce companies is preferred

Product area

In gTech Users and Products (gUP), our mission is to advocate for Google’s users by creating helpful and trusted experiences across the product ecosystem. We achieve this by meeting partners and consumers where they are with support and help, representing their needs with our product partners and proposing fixes and features that elevate their engagement with Google's diverse product ecosystem. Additionally we provide a range of product services that ensure our products are optimized for every user, no matter where they are in the world (e.g., localization, digitization, partner integration and more).

Job description

gTech’s Professional Services team takes a creative, collaborative, and customer-centric approach to provide foundational services and forward-looking business solutions to top advertiser and publisher customers. Through technical implementation, optimization, and key solutions, gTech Professional Services helps customers attain their business goals while building long-term capabilities.

Additional job description

In this role, you will be responsible for the technical relationship of our Distribution partners. You will collaborate with teams in Engineering, Business, and Product Management to use technologies for our internal or external clients/partners. From concept design and testing to data analysis and support, you will own the technical execution and work with business operations to distribute products such as Chrome, Lens, Android apps, and more. You will balance business and partner needs with technical constraints, develop innovative, solutions, and serve as a partner and consultant. You will also build tools and automate processes, oversee the technical execution and business operations of our products, as well as develop product strategy and prioritize projects and resources.

Qualifications

Job responsibilities

• Work with our Product, Engineering, and Partnership teams. Develop solutions, provide consulting services to our partners, build relationships, and know the partner's needs.
• Help partners in their day-to-day challenges by being the subject matter expert, delivering solutions, and troubleshooting their technical issues.
• Propose, design, create, and present proof-of-concept prototypes and demos to a variety of audiences, from engineers to marketing professionals.
• Perform implementation reviews. Advocate for new product features, and provide partner feedback to internal cross-functional teams including Product Management and Engineering.
• Deliver business intelligence. Use internal and external data sources to provide data insights to support decision making.

Minimum qualifications

• Bachelor’s degree in Engineering, Computer Science, a related field, or equivalent practical experience.
• 3 years of experience working with client-side web technologies (e.g., HTML, CSS, JavaScript, or HTTP).
• 3 years of experience coding with one or more programming languages (e.g., Java, C/C++, Python).
• Experience in technical troubleshooting, and managing internal/external partners or customers.

Preferred qualifications

• Master’s degree in Engineering, Computer Science, Business, or a related field.
• 5 years of experience in business intelligence, data analytics, or statistics.
• 5 years of experience working with systems (e.g. Linux, Unix).
• Excellent project management skills and attention to detail.
• Excellent problem-solving and troubleshooting skills.
• Ability to present to the technical level audience.

Office Location : Tai Seng

Working hours : Monday to Friday | 8am to 6pm | Saturday 8am to 12pm

Salary (commensurate with experience) : Up to $5,000 + Variable Bonus + Annual Leaves + Medical Benefits

Industry : Construction Sector - A&A / Building Works

Job Description

•Check and analysis drawings, authority requirements and tender specifications

•Check site installation whether it is in accordance to design and standards

•Oversee the projects, ensure compliance of contracts and the drawings with regulatory specifications.

•Able to coordinate with owners, architects, consultants, project managers, sub-contractors and suppliers.

•Attend meetings with architects and consultants

•Other ad-hoc duties as assigned

Job Requirements: Possess at least diploma in Electrical Engineering and Mechanical Engineering (M&E) or equivalent

•However, entry level are encouraged to apply, from recognized University by Singapore PE Board as training will be provided.

•Good operational planning for construction projects

•Good in communication and written abilities

•Required skill: Able to use Microsoft Project to present schedule to the client

•Knowledge in Construction and Renovation.

•Skills required: Autocad

Maxhunt Resource Pte Ltd | EA Licence: 22C1322
Loh Wing Sheng | Registration No: R22110239

• Electrical Supply (MNC company)
• Basic $3000 - $3500
• *AWS + Bonus + 14 days AL
• Mon-Fri (8.15am-5.45pm)
• Working location: Tuas
• Company transport provided: CCK, Bukit Batok, Boon Lay

Responsibilities

• Inspect and test incoming and outgoing parts according to established procedures and maintain quality records.
• Report quality issues to the QA Manager and relevant department heads, ensuring non-conforming products are separated.
• Authorize the rejection of unsatisfactory parts and approve the release of conforming parts for delivery.
• Perform routine factory tests on switchboards and oversee testing and commissioning on-site or aboard vessels.
• Assist in achieving quality objectives, recommend solutions for issues, and verify their implementation.
• Ensure safety compliance, proper calibration of instruments, and maintain good housekeeping in the QA Department.

Requirements

• Min ITE/ Diploma in Electrical Engineering

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

We're seeking a skilled Engineer, Quality Assurance to join our team in Singapore. Reporting to the Engineering Manager, you'll play a critical role in ensuring the quality assurance aspects of our technical areas.

Key Responsibilities

• Participate in our shift-left testing process and entire Software Testing Life Cycle (STLC) to ensure high-quality products.
• Collaborate with Product Managers to define, test, and validate product requirements.
• Design, execute, and automate tests for web applications and backend APIs, ensuring comprehensive coverage.
• Produce detailed test reports and serve as the sign-off authority for feature releases.
• Work closely with Development teams to identify and resolve issues, ensuring seamless collaboration.
• Contribute to the evaluation and adoption of testing automation frameworks.
• Mentor junior QA engineers, sharing expertise and promoting growth.

Essential Qualifications

• Bachelor's or Master's degree in Computer Science or a related field.
• Excellent communication skills, with the ability to explain technical concepts to diverse audiences.
• 2-5 years of experience in web application testing and automation.
• Strong foundation in Software Engineering concepts and STLC life cycle.
• Ability to write test plans and test strategy documents.
• Good knowledge of API and Web testing, Networking, and Operating System concepts.
• Strong troubleshooting, debugging, and analytical skills.

Preferred Qualifications

• Experience with testing automation tools.
• Background working in product companies.

We regret to share that only shortlisted candidates will be notified.

www.dadaconsultants.com

Data provided is for recruitment purposes only

EA Registration Number: R21102607

Business Registration Number: 201735941W

Licence Number: 18S9037

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible and focus on improving tool performance and availability, in charge if maintenance, diagnosing failures and implementing effective solutions to meet uptime and cycle time requirements in the respective modules: Etch (Dry Etch and Wet Etch); Photolithography; Diffusion; Chemical Mechanical Planarization (CMP); Chemical Vapor Deposition (CVD); or Physical Vapor Deposition.

Key Responsibilities

• Maintain equipment performance in cleanroom environment for quality production.
• Handle on-duty tasks and conduct fundamental alarm troubleshooting; identify root cause and problem-solve critical equipment issues with urgency
• Install and qualify new tool sets on schedule to increase capacity promptly
• Continually improve tool uptime availability, drive defect reduction and enhance hardware capability
• Develop defense and monitoring system to prevent equipment failure or performance lost.
• Analyze complex data sets and derive actionable insights to optimize equipment parameters and controls
• Actively collaborate with equipment suppliers and partners to identify tool deficiencies; develop, evaluate, and validate corrective and preventive solutions

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Electrical and Electronics Engineering, Chemical Engineering, Materials Science, Physics, or a related STEM field
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Job Description

-Contribute to high-quality research and development work in TCOMS laboratory through physical experiments including:

o design of scaled physical test models, such as maritime vessels, offshore rigs, marine renewable platforms, and aquaculture systems for testing in TCOMS Ocean Basin.

o generation of detailed design, production, assembly, and as-built drawings of test models.

o Work with a team of engineers and technicians on model fabrication and modification, calibration, instrumentation, and experimental setup.

o enhance the measurement of models? behaviour and response by use of appropriate sensors.

o document design processes, methodologies, and results.

o contribute to process enhancements for improved efficiency of research work.

-Perform research in the following areas:

o Offshore hydrodynamics

o Coastal Protection

o Loads, motions and response analysis of Marine & Offshore platforms and floating structures

o Fluid-structure interactions

· Collaborate with internal teams, affiliated research institutes and other relevant stakeholders in proposal preparation and submission.

-Any other duties as assigned by supervisor.

Job Requirements

-Bachelor's/Master's Degree in Civil Engineering, Mechanical Engineering, Marine Engineering, Offshore Engineering, or other related disciplines.

-Preferably 3 years of relevant research/industry experience with competent knowledge in some of the following areas:

o Offshore engineering, marine engineering, hydrodynamics, naval architecture.

-Prior knowledge in the following numerical methods/software/programming languages will be an advantage:

o CAD software such as SolidWorks, Rhino, AutoCAD

o Engineering tools such as WAMIT, SESAM and OrcaFlex

o Programming codes such as Python, MATLAB, or equivalent.

o StarCCM+, OpenFOAM

-Model experiments in wave flumes, wave tank or ocean basin.

-Good interpersonal and communications skills.

-Ability to adapt and work effectively as members of a team.

-Good command of written and spoken language.

-Resourceful and self-driven with a high degree of professional integrity.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Minimum Viable Product Studio (MVP Studio) of NUS Enterprise, Technology Transfer and Innovation, supports NUS startups in their prototyping journey by providing industry know-how and technical guidance in the productization of intellectual property. We are seeking a versatile mechanical design engineer with market-proven expertise in product design and development, to join our team as a Master Engineer (Mechanical Design).

As a Master Engineer (Mechanical Design), you will guide NUS startups through the mechanical design and development process. You will support the prototyping phase of NUS startups, including generating mechanical concept proposals and mechanical architecture, implementing detailed design using 3D modelling and 2D drawings, and ensuring full design integration at system level. You will collaborate closely with internal cross-functional teams and external vendors to deliver robust mechanical design solutions.

Duties and Responsibilities

Prototype Design & Development

• Generate mechanical concepts and provide mechanical architecture.
• Implement detailed design utilizing 3D modelling and 2D detailed drawings.
• Establish modular design and full product BOM structure.
• Create sub-assembly test plans and test reports.
• Ensure design robustness and full design integration at system level
• Collaborate with ID to implement human-centric styling solutions for mechanical designs.

Technical Advisor to NUS Startups for Mechanical Design & Development

• ​​​​​​​Facilitate startups in prototyping their mechanical designs.
• Provide technical guidance and design expertise throughout the development lifecycle.
• Collaborate effectively with internal team members, startups, NUS faculty members.
• Communicate technical concepts and solutions to non-technical team members and stakeholders.

Vendor Management

• Work with vendors on DFM for the required mechanical designs.
• Coordinate with vendors to ensure delivery timelines and quality standards are met.

Qualifications

• Bachelor’s degree/ Master’s degree in Mechanical Engineering.
• Market-proven mechanical 3D design experience in consumer products, automotive/industrial products, or medtech/healthtech instrumentation, with at least 12-15 years’ combined experience.
• Proficient in 3D CAD modelling, preferably in Pro-Engineer/Creo and Solidworks.
• Experience in casting, plastics molding, sheet metal design, and 3D printing.
• Advance geometrical dimensioning and tolerancing.
• Good knowledge in automation and mechanism design.
• CFD/flow simulation in analyzing flow/thermal characteristics.
• Completed and led at least 5 complete product design life cycle.
• Good knowledge in control systems.
• Strong troubleshooting skills at module and system levels.
• Proven team manager with excellent teamwork and collaboration skills, with the ability to mentor and guide startup teams

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and , efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

About Us:

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary:

You are responsible for ensuring robust infrastructure, managing servers, databases, analyzing system operations, and supporting digital transformation in semiconductor manufacturing.

Key Responsibilities:

• Assisting in the IT infrastructure to ensure the seamless operation of a semiconductor intelligent manufacturing.
• Handling digital transformation initiatives within the organization to enhance operational efficiency and effectiveness.
• Navigating the complexities of international IT projects, ensuring successful collaboration and cross-cultural teamwork.
• Assisting in Fab infrastructure system solutions.
• Performing server, storage, and database management to maintain optimal system performance and reliability.
• Conducting system operation optimization analysis to identify and implement improvements for enhanced performance.

Education Qualification & Essential Experiences:

• Diploma in Computer Science, Electrical, Mechanical, Information Technology or a related field.
• Strong understanding of semiconductor technology is preferable.
• Knowledge of SPC, FDC, CIM, and Full Automation
• Proficient in at least one of the following programming languages: C, C++, C#, Java, or Python.
• Capability of RTD (Real-Time Dispatching) is a plus.

Personal Attributes:

• Must be available to travel to Taiwan for a training period lasting 6 to 9 months.
• Able to be reliable and accountable in all tasks and responsibilities.
• Have the drive to achieve goals and complete tasks independently.
• Proficient in effectively conveying information through both written and verbal communication.
• Open to taking on challenging tasks and embracing new opportunities.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Job Description:

- Perform Civil, Structural Analysis and Design to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- To Lead and Mentor Junior Engineer in Performing Engineering Task

- Reporting to Principal Engineer / Management

Job Requirements:

- Candidate must possess at least a Master's Degree /Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 4 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

Summary:

• Salary up to $6000
• MNC company - stable revenue & perks
• Transport allowances
• Possess own vehicle
• Location: Pioneer
• 5 days work week
• Sales experience in precision engineering related products

Key Responsibilities:

• Develop new business opportunities & sales leads for revenue growth and customer retention
• Achieve sales targets and analyst current market trends and industry information
• Pitch, recommend and fulfil the requirement of customer in terms of products and services offered
• Work closely with the production, application and shipping team to ensure timely delivery and that all order requirements are met
• Attend problem and generate solution
• Other related ad hoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering or equivalent
• Sales experience in precision engineering related products
• Strong technical knowledge in CNC machines
• Possess own vehicle is a must

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845