Job scope –

- Provide guidance to process technicians on key parameters, plant operating instructions, equipment preparation for maintenance, process troubleshooting, operating plans, and safety concerns.

- Supports process control and data systems such as distributed control system (DCS) and plant information monitoring system.

- Conduct process evaluations, technical feasibility studies, process trend analysis, and provide technical leadership for the continued operation of the facility.

- Support the Commissioning Team during plant start-up, performance test, optimization and prepare documentation.

- Prepare and review Standard Operating Procedure, PFDs, P&IDs, material, quantity, heat and mass balances, utility and consumable balances, and technical data sheets for major equipment items.

- Provide the required technical support as technical lead in the plant reliability and productivity improvement projects.

- Liaising with the operation team in the control room on a daily basis.

- Ensure safety at the sites through compliance to safe operations and practices at all times.

- Liaise with authorities with regards to all matters with proper documentation.

Requirement

- Minimum Bachelor Degree in chemical engineering or petrochemical engineering.

- 2 years’ working experience in a petrochemical plant or oil refinery is an advantage.

- Strong knowledge of chemical process, and chemical process safety handling.

- Good interpersonal and communication skills, excellent spoken and written skills.

- Exceptional problem solving and analytical skills.

- Basic knowledge of AutoCAD and any other CAD design software is desirable.

- Able to work independently and a multitasker.

• Plan and supervise the team of Technicians in the execution of preventive, corrective maintenance programs within schedule and cost, and in compliance with company's and regulatory standards and requirements, and meeting customer’s expectations.
• Troubleshoot/ fault diagnosis/ failure analysis to determine cause of failure
• Develop Risk Assessment and mitigation measures for every Maintenance job in the plant before executing maintenance activities
• Establish and maintain a proper documentation system to archive all jobs internally and with customers for sharing and audit purposes
• Engage stakeholders to resolve technical problems that arises in the plant.
• Assist the maintenance head to identify, plan & review the training needs of the section
• Assist the maintenance head to review and identify spare requirements classifying under Strategic or Inventory spare
• Assist the maintenance head to develop the section's Maintenance budget
• Timely resolution of technical issues to recover plant and return it to commercial operations.
• Troubleshooting plant/equipment problems
• Scheduling and optimizing manpower both staff and contractors

Qualifications & Experience

• Degree in Electrical Engineering
• Preferably minimum 3 years of experience in relevant Maintenance fields in a Power Plant or Petrochemical Industry
• Safety conscious
• Working Independently
• Ability to work in a team
• Good communication skills
• Basic PC skills like Excel & Words

M&E Site Engineer / Manager – Basic Salary up to $6,000 per month. 5.5 day week. Pandan Road. Full Time - Singaporeans only

This recruitment effort is in collaboration with e2i

Location: Pandan Road (Reporting Location)

· Oversees client & contractor coordination, attending to their needs

· In charge of ensuring that the clients’ specifications are met and make technical drawings

· Develop and prepare designs and drawings from preliminary concepts, sketches and specifications

· Perform design layouts of new or existing space including drawing sketches and incorporate them into CAD file

· Adhere to specific deadlines and deliver high-quality plans

· Work on projects with little to no oversight and review from management

· This position is open for both recent graduates and mid-career individuals (mature and non-mature).

Candidate’s Requirements:

• Minimum NITEC/ Diploma in Electrical, Mechanical, Mechatronics Engineering or its equivalent

• Able to comprehend schematic/Technical drawing

Working Period:

- Monday to Friday - 8am to 5pm

- Saturday – 8am to 12pm

Basic Salary:

Project Engineer - $2,500 to $4,500 per month

Project Manager - $4,500 to $6,000 per month

Contact Grace 87952790

Job Description

• Establish Efficient & Effective process engineering planning (Work Instruction) base on costing estimation request.
• Make/Buy decision for all drawings given by Sales on new order launched.
• Planned and maintaining process routing in ERP system whenever there is new work order launched.
• Coordinate with CNC Programming team on all NPI & FA fabrication.
• Identify opportunities for fabrication process improvement for existing high runner and repeated jobs.
• Supporting in Quality MRB meeting and advice disposition accordingly.
• Prepare PMP /FMEA and work instruction for FA submission.
• Perform new products' manufacturing studies and develop process control specifications.
• Review process specifications to be in line with changes in product specs, process and quality improvement.

Job Requirement

• Min. Diploma/Degree in Mechanical, Engineering related courses or any equivalent.
• Min 2-3 years of metal fabrication or precision engineering experience.
• Detail oriented.
• Good verbal and written communication skills.
• Self-motivated to work independently with team support & minima guidance.
• Ability to maintain a positive attitude at all time.
• Computer knowledge with MS office etc.

A PROCESS AUTOMATION ENGINEERING COMPANY IS LOOKING FOR AN ELECTRICAL ENGINEER

REQUIREMENT:

- DIPLOMA / DEGREE IN ELECTRICAL POWER AND CONTROL

- A GOOD KNOWLEDGE AND EXPERIENCE IN PLC PROGRAMMING AND TROUBLESHOOTING

- MIN 5 YEARS OF WORKING EXPERIENCE

JOB DESCRIPTION

- PLC DESIGN / PROGRAMMING

- TROUBLESHOOTING

- TESTING, COMMISSIONING OF EQUIPMENT / MACHINERY FOR FOOD & BEVERAGE, CHEMICAL INDUSTRIES ...

Job Info:

• Salary: Basic from $3000 - $4000 + AWS +VB
• Working Hour: Monday - Friday (7:50am - 4:55pm)
• Location: Tuas Link (Company transport pick up at designated point island wide)

Job Scope:

• Provide technical support for the production process
• Develop work procedures, implement corrective actions, and preventive measures
• Conduct scheduled preventive maintenance (PM), calibration, and troubleshoot equipment issues promptly to reduce equipment downtime
• Lead process improvement initiatives and analyze defects
• Coordinate with customers to discuss product quality.
• Perform any other assigned ad-hoc duties as needed

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Job Responsibilities:

• Gather software requirements and design solutions for modules and small software systems
• Develop and support software including applications, database integration, interfaces and new functionality enhancements.
• Write both internal and external technical documentation
• Deploy, install, and configure hardware and software system

Requirements:

• Bachelor's degree or higher in Computer Science, Engineering, or a related field.
• Proficiency in programming languages such as Python, C++.
• Minimum 2 years of relevant experience
• Experience with wearable IMU sensors and motion capture systems, particularly Xsens DOTs IMU sensors, is preferred.
• Experience with desktop UI development frameworks such as Qt or Electron
• Strong background in software development, including data synchronization, algorithm development and user interface design.
• Knowledge of signal processing techniques, machine learning algorithms, and data analysis methodologies.
• Excellent problem-solving skills and the ability to work independently as well as part of a team.
• Strong communication skills and the ability to effectively collaborate with cross-functional teams.

Project Engineer Responsibilities:

• Preparing, scheduling, coordinating, and monitoring of assigned engineering projects.
• Formulating project parameters and assigning responsibilities to the most capable employees and monitoring the project team.
• Interacting with clients, interpreting their needs and requirements, and representing them in the field.
• Performing quality control tasks on budgets, schedules, plans, and personnel performance and reporting on the project's status.
• Cooperating and communicating with the project manager and other project participants and collaborating with senior engineers to create more efficient project methods and to maintain the project's profitability.
• Reviewing the engineering tasks and initiating the necessary corrective actions.
• Developing specifications for the project's needed equipment.
• Creating frameworks to measure the project's metrics and data collection.
• Establishing field test methods and methods for monitoring the quality of those tests.
• Ensuring the project's compliance with the applicable codes, practices, policies, performance standards, and specifications.

Project Engineer Requirements:

• A Bachelor's degree in engineering or a related field.
• A valid engineering license.
• 4 or more years' field and project planning experience.
• Excellent computer literacy and knowledge of design and visualization software.
• The ability to work with multiple discipline projects.
• Excellent project management and supervision skills.
• Excellent organizational, time management, leadership, and decision-making skills.
• Strong written and verbal communication skills.
• Knowledge of applicable codes, policies, standards, and best practices.

Summary

The incumbent is responsible for retrieve and review all customer specification documents, vendor quotes, drawings and diagrams for creating mechanical designs for customer.

Responsibilities

• Prepare and submit drawings for customer’s review and approval.
• Amend drawing & revise the drawing as per command from production manager or relevant party to meet customer’s requirements.
• Responsible for design control and drawing specification control, liaise with customer for engineering design.
• Prepare bills of quantities according to project requirement for production manager easy to refer.
• Prepare quotation to customer and follow up with customer to make sure we meet customer’s requirements.
• Perform daily review and approval of products release (QA) to check the quality of products.
• Ensure all quality management system documentation are kept in order as per our ISO standards.
• Implement quality control programs as per our ISO standards.
• Mechanical Product includes, Skid platform, Form Hose Reel, Enclosure, Panel, Bicycle Rack, Battery Rack, Construction Structure and etc.

Requirements

• Diploma/Degree in Mechanical Engineering.
• Minimum 2 years of experience.
• Familiar with construction, manufacturing field etc.
• Must have AutoCAD knowledge.
• Good interpersonal skills and able to interface with all levels.

Job Info:

• Salary: Basic from $2200 - $2700 + AWS
• Working Hour: Monday - Friday (8:30am - 6pm)
• Location: Expo MRT

Job Scope:

• Schedule regular internal audits to verify compliance with SOPs, quality policies, procedures, and testing methods
• Collaborate with the incoming material receiving team
• Manage the root cause analysis and corrective action process, working with operations to implement effective and lasting solutions for quality issues
• Monitor the status of internal and external Corrective Action Reports, conducting root cause analyses as needed
• Propose resolutions for unresolved quality issues and oversee their implementation
• Coordinate external audits
• Plan and execute internal audits following established procedures
• Assist the QA Engineer/Executive in preparing ISO documents
• Familiarize the team with new measuring equipment and provide training on usage methods.
• Ensure the calibration of all measuring equipment according to prescribed intervals and standards
• Identify critical inspection points based on customer drawings and product specifications for new projects

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Job Info:

• Salary: Basic $2800 - $3500 + AWS + VB
• Working Hour: Monday - Friday (7:50am - 4:55pm)
• Location: Tuas Link MRT (Company transport pvd at designated pick-up point Island wide)

Job Scope:

• Support the Engineer/Supervisor in implementing MBO initiatives to achieve departmental KPI aligned with the Business Plan and Division Objectives
• Collaborate with the Engineer/Supervisor to enhance processes for Yield, Quality, and Productivity, and provide engineering assistance for assigned processes, including support for new product integration and other cross-functional projects
• Execute improvement initiatives, including cost reduction, yield enhancement, and productivity optimization, while also participating in MBO activities
• Assist in troubleshooting and resolving production line issues by collaborating with QA and Production teams
• Collect data and generate technical reports to validate customer product qualifications and ensure process integrity
• Aid Engineers in process development and optimization efforts by conducting DOE and subsequent analysis
• Support prototype initiatives, including the introduction of new products, packages, processes, substrates, or lead frames
• Assist in drafting technical reports for customer product qualification, process assessment, and DOE analyses, ensuring clarity and accuracy in documentation

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Job Info:

• Salary: Basic up to $4000 + AWS + VB
• Working Hour: Monday - Friday (7.50am - 4.55pm)
• Location: Joo Koon

Job Scope:

• Plan, supervise, and execute projects and tasks
• Address and prevent issues to enhance customer satisfaction regarding product quality
• Maintain quality, environmental, and water efficiency systems within the company
• Assist in the maintenance and compliance of ISO 9001, ISO 14001, IATF 16949, ISO 17025, ISO 13485, and ISO 46001 standards
• Understand the company's policies and objectives related to quality, environment, water efficiency, and occupational health and safety (OH&S), as well as environmental aspects, safety risk assessments, and information security risks
• Conduct internal Quality and Environmental Management System (QEMS and WEMS) audits and coordinate external audits
• Monitor quality failure costs in the production department
• Perform calibration and maintenance of x-ray machines, ensure cleanliness in the x-ray equipment area, and update monthly schedules for x-ray machine maintenance

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

A chemical manufaturing company located in the West is looking for electrical engineer.

Job Scope :

• Assist with electrical wiring and installation
• Attend to electrical breakdown and maintanance
• Design electrical diagram for the maunfacturing process line
• Troubleshoot on electrical fault and error
• Carry out preventive maintenance
• Assist wtih electrical sub-station servicing
• Able to work with Automation and SCADA

JOB RESPONSIBILITIES

• Operates and maintains complex test equipment appropriately to measure and test customer samples.
• Performs or arrange complex maintenance on designated test equipment and laboratory area. May perform / arrange complex calibration of test equipment.
• Management of samples from receiving, internal distribution through lab testing to dispatch dispositioning using database software and basic Microsoft programs such as MS Word, Excel, Power Point.
• Checking samples against sample requirement and raising any issues to Project team.
• Ensure samples are managed within quality process and in compliance with according the UL Quality and accreditation process requirements.
• Working with teams to ensure samples are ready and available for test start internal customers and stored in the correct location.
• Communicating and guiding internal customers on sample return via phone and email.
• Support laboratory, engineering and shipping/receiving teams.
• May also be responsible for maintenance of the warehouse.
• Integrates continuous improvement concepts and techniques into all aspects of the job.
• Assist and trains staff as directed.
• May assist leadership in the development of training as necessary.
• May develop or assist in the creation of reports and metrics as necessary.
• Maintain an organized, safe, clean and productive work area.
• Conducts periodic inventories of sample storage areas.
• Reports any lost, missing or damaged samples and assists in the research and resolution.
• Read and follow the Underwriters Laboratories Code of Conduct and follow all physical and digital security practices.
• Coordinate and plan EMC Testing.
• Other duties as assigned.

JOB REQUIREMENTS

• University Degree in Engineering (in related field of work) with at least 2 to 4 years' work experience.
• Demonstrated ability to manage multiple projects while maintaining high quality and exceptional customer service.
• Demonstrated ability to successfully partner with Engineering and other Laboratory Personnel to complete projects in a timely manner with high quality.
• Ability to incorporate automation into day-to-day testing.
• Demonstrated ability to analyze special testing needs, equipment handling and calibration.
• Effective communication skills and ability to interact with customers.
• Demonstrated ability to be innovative and creative.
• Able to work in a team-oriented environment and work independently.

Software Engineer, Network Technology - Singaporeans only

Location: International Business Park

Job Description

We are seeking highly talented Software Engineer, Network Technology with experiences in developing

application or middleware on embedded system (automotive ECU system is preferable) for connectivity and

network functions.

Job Responsibilities

• Design and develop protocol stacks for Vehicle Network/Communication functions or systems

(including but not limited to Ethernet, CAN, LIN, FlexRay, Optical related.)

• Develop subsystem prototyping such as DoIP and SOME/IP stack based ecosystem.

• Lead or participate in product software architecture definition and design which meet automotive OEM

requirement.

• Ensure and carry out forward design process and document quality according to V model to fulfil

stringent automotive industrial ISO standard.

• Implement software programming to realize defined architecture & design.

• Behave independently as technology domain representative for internal and external customers.

Preferred Skills and Experience Requirement

• Strong capability in independent thinking, self-motivation and innovative thinking.

• Deep understanding of network layer components such as IPv4, IPv6, routing, forwarding, TCP/IP.

• Deep knowledge in applying C, C++, JAVA or other scripting for different embedded system

development.

• 8 years' experience in the embedded system development, ARM processor, preferably in automotive

industry.

• Knowledge of software development using embedded C, C++, C#

• Knowledge of OS, data structures and algorithms.

• Knowledge of streaming media protocol and AVB.

• Knowledge of Real-time operating systems (RTOS), Linux, Android Auto or QNX will be added

advantage.

• Experience in developing time-critical functions in embedded systems.

• Proficiency with network monitoring protocols and tools.

• Knowledge of security engineering (building secure systems), Operating Systems and network security,

common attack patterns and exploitation techniques.

• Knowledge of system security analysis techniques such as threat modelling, attack trees etc.

• Excellent written and verbal communication skills.

• Experience with Automotive industrial protocols will be added advantage.

Qualification

• Bachelor's degree or above in Information Security, Electronic, Computer Engineering, Computer

Science or related field

Working Hours:

Monday to Friday

9am to 6pm

Salary :

$4500 to $8500 per month

1. JOB DESCRIPTION

Job Title

Site Engineer

Occupation

ENGINEER

Job Description & Requirements

Site engineers work chiefly on construction projects. They form part of construction management and use their skills and expertise to guide crew members and ensure the successful completion of a project. Site Engineers frequently liaise with clients and negotiate with vendors and suppliers to secure the best deals.

Job Responsibilities

* Inspect project sites and monitor progress, ensuring work done conforms to safety standards and design specifications while determining if changes or adjustments need to be made
* Test materials and soils to determine the strength of concrete, steel, asphalt and foundations of buildings
* Utilize computer assisted design and other drawing tools to plan and design various types of systems and structures, including roadways, buildings, water systems and tunnels
* Direct and participate in surveying activities to lay out installations and establish grades, reference points and elevations to properly guide construction
* Determine design specifications by computing grade and load requirements and material stress factors
* Manage and direct operations, construction and maintenance activities being done at project sites
* Prepare public reports on various topics, including deeds, bid proposals, property descriptions and environmental impact statements
* Ensure activities comply with all environmental, governmental and safety regulations and address all problems concerning actions that do not comply

Job Skills & Qualifications

Reqiured:* Bachelor’s degree in civil engineering or related field
* Excellent problem solving and communication skills
* Experience or coursework in AutoCADPreferred* Previous experience in an engineering field
* OSHA training and certification
* Prior work on geotechnical, waste management or environmental projects

In this role, you will have the unique opportunity to engage in field service, site installation, and perform Quality check on all completed machines.

Job Responsibilities:

• Provide site machine installation and maintenance.

• Attend to service call.

• To conduct in-house and on-site training for customer.

• Investigate and handle customer's complaints.

• Quality check on all completed machines to ensure stringent quality compliance before delivery to customer.

Requirements:

• Diploma in Electrical or Mechatronics Engineering

• Minimum 2 years of field service or QA experience in Industrial Automation projects

• Ability to build strong relationships, work with customers to solve problems

• Good team player with excellent interpersonal and communication skills.

• Meticulous, Quality conscious and Problem solving/troubleshooting skills.

Research Scientist/Engineer, Mapping and Localization

At the role of Research Scientist/Engineer, Mapping & Localization, you will be involved in researching, developing, and deploying algorithms for environmental mapping & accurate positioning of cars; you will be able to interact with vehicle manufacturers and access state-of-the-art autonomous vehicle testing platforms in real testing environment; you will be expected to tackle a broad range of real-world localization problems and come out with robust solution to help ensure our vehicles are safely driving on the road.

Job Descriptions

• Design and implement High Definition 3D Mapping using LIDAR, Vision and/or GPS-INS systems.
• Design and implement real-time vehicle localization using LIDAR, camera and sensor fusion.
• Design and implement real-time vehicle localization via map matching.
• Calibration of multiple sensor setup on vehicle.
• Test algorithm on real-road driving.
• Write professional design and technical documentation.

Job Requirements

• Bachelor's degree in Computer Science or a related field, or equivalent experience. Master’s degree and above will be an advantage.
• 2+ year experience in C++ software development, preferred on Linux platform.
• Strong knowledge on Lidar SLAM with real deployment experience, and/or, experience with Visual Odometry(VO), Visual-inertial Odometry(VIO), Visual SLAM.
• Good knowledge on 3D Reconstruction, SLAM, scan matching, ICP and Bundle Adjustment.
• Good knowledge on probabilistic theory, Kalman filter, particle filter, estimation, nonlinear optimization techniques.
• Experience with nonlinear solvers such as Ceres, g2o.
• Good knowledge on sensor characterization (e.g., error modelling, bias, stability etc.)
• Hands-on experience in sensor interfacing, data capture and synchronization.
• Experience in using version control tools such as Git.
• Able to work independently as team player.
• Strong problem solving, analytical and conceptual skills, with good communication skill.

Job Description

• Identifies risk and hazard associated with the electrical works and prepare related risk assessment and work method statement.
• Jobs briefing and tool box talk to workforce prior to start the work activities.
• Ensures timekeeping are followed by subcontractor workers.
• Ensures availability of required engineering drawings, resources and consumables to carry the works.
• Coordinates with other discipline such as QAQC, Material, Painting department according to requirement during the project phase.
• Coordinates closely all EIT work activities between Seatrium (Structural, Piping, Mechanical, Lifting, Architecture, Blast & Paint, HVAC, Maintenance, Commissioning, Weighing, Sea Fastening, Load Out), and Subcontractors.
• Monitoring the subcontractor for daily progress and updates.
• Enforces safe work practices at job site, and monitor, and ensure workers work in a safety manner and all EIT job site are in good and safe condition.
• Participates in Line Walk and prepare punch list prior to complete EIT activity.
• Ensures punch list liquidation and action by subcontractor on required punch point on priority basis.
• Responsible to stop; if any violation by the subcontractors against the HSE or quality requirements.

Job Requirements

• Candidate must possess at least a Bachelor’s degree in Marine Engineering/ Electrical, or related disciplines
• Experience with design-build and construction management at risk delivery methods.
• Excellent proficiency in English (written and spoken)
• Good working knowledge of all phases of construction including work commonly done by the various construction disciplines
• Good knowledge and experience in developing and managing a progress reporting methodology for a complicated design effort

Job Description

• Assists Assistant Section Manager with the daily NDT Inspection activities and manpower deployment
• Reviews technical specifications, drawings, procedures, and standards required in the project
• Reviews and checks the project NDT plan and procedures submitted by NDT Assistant Engineer/ Engineer
• Monitors the project schedule for NDT activities
• Reviews and monitors NDT contractors' technicians’ list, equipment calibration list, and their NDT reports before submission to project clients
• Performs dressings, electrocardiograms, and other minor procedures
• Liaises with QA Engineers on the NDT work scope, requirements, and progress
• Ensures there is proper documentation of project inspection and test activities
• Initiates recommendations and provides solutions to project problems through designated channels
• Performs internal audits on project documents and inspection activities
• Ensures that all standard operating procedures comply with specifications, quality standards, statutory and regulatory requirements
• Any other assigned duties and responsibilities

Job Requirements

• Degree/ Diploma in Naval Architecture/ Civil/ Marine and Offshore Engineering/ Mechanical Engineering
• At least 3 years of relevant Quality Assurance working in Radiography and Ultrasonic Flaw Detection Test, preferably in the offshore and marine industry
• Possess a positive and willing-to-learn attitude

Job scope:

• Coordinate equipment assembly and troubleshooting on site.

• Follow up technical matters during design, manufacturing, assembly and operation.

• Prepare technical documents and drawings.

• Coordinate and plan site delivery and assembly schedules.

Requirements:

• Degree from polytechnic with mechanical, electrical or related study.

• Min. 1 year of relevant working experience in plant or construction machinery.

• Good in English and Mandarin is preferred.

• Able to use Autocad or equivalent CAD Softwares.

• Good knowledge of MS Excel and MS Word.

• Has class 3 driving license or has the possibility to convert from oversea driving license.

• Hands on and self-motivated to work.

• Having field experience is an advantage.

Job Description:

1. To carry out engine repair work, engine testing, engine commissioning or any troubleshooting works for power generation engines (Land & Marine) & Main propulsion engines.

2. To carry out other Mechanical repair & troubleshooting works such as MHI Deck crane, Mooring Winches, Kamome Propeller & Thruster, Kawasaki Thruster.

3. To provide a service report with necessary recommendations & findings.

4. To provide Technical support for site engineers whenever necessary.

5. To provide Technical support to customers whenever necessary.

Job Requirement:

1. Diploma or Degree (Major in Mechanical Engineering).

2. Can read & understand basic Mechanical diagrams.

3. Proficient in Microsoft Office (Word, Excel, PowerPoint).

4. Able to travel (Anchorage/Overseas) by flight or by sailing with the vessel.

5. Able to work outdoors & onboard vessels and stations overseas.

The position holder reports to Sales Manager/Senior Manager and must carry out the assigned duties and responsibilities and be able to work closely with other departments and other functional managers within the organization.

He/She MUST at all times maintain the confidentiality of all prices and plans and SHALL NOT disclose confidential information without the approval of her/his Manager.

Key Tasks:

1) Sales Functions

• Achieve and excel against quarterly sales targets.
• Prepare sales quotations and proposals based on technical specifications.
• Follow up sales enquiries.
• Build and maintain good customer relations with existing accounts.
• Actively pursue new sales opportunities.
• Grow sales in the assigned segment.
• Monitor marketplace information and provide recommendations.
• Regular customer visits to position En-Syst as the preferred product/solution provider.
• Provide appropriate technical support to customers, consultants, and prospects.

2) Administration and Operational Functions

• Keep good records of documentation, including enquiry register log.
• Provide monthly sales updates and reports.
• Co-ordinate and lead meetings.
• Prepare a sales work order and handle over to the project team.
• Lead and execute improvement/new processes and customer service experience.
• Ensure process conformance and local legislative compliance with appropriate standards and authorities.

3) Other Assignments

• Shall carry out any project/task/work assigned by Immediate Manager, General Manager, and Directors as and when required to support the business.

Requirements

Education

• Candidate must possess at least ITE/Diploma/Advanced/Higher/Graduate Diploma in engineering, business, or marketing.

Knowledge / Experience / Others

• Two to three years of industry sales experience and meeting sales goals.
• Customer service and relations skills.
• Adept at Microsoft Office and quickly pick up ERP software navigation skills.

Personal Competencies

• Shall have valid Singapore class 3 driving licence.
• Able to perform multi-tasking.
• Independent, team player with good interpersonal skills.
• Competitive and extroverted as the role is customer facing and requires winning people over.
• Self-initiated to gather information about the market.
• Proponent of embracing technology to improve the sales operations process than deferring back to ‘entry level’ solutions.

We are seeking an experienced Service Engineer for our Singapore Branch

As Service Engineer in our SGP branch you will travel to vessels in ports/ship yards to perform service, fault finding, combustion adjustment, system upgrades, renewal of control systems etc. Some jobs are completed in port/ship yard, others are completed at sea. Other tasks can i.e. include assistance in engineering and design processes, remote email assistance to customers, ensure cost optimization in projects.

It is a job where you have a high influence on your daily work and a job that includes substantial freedom with responsibility.

You will mainly be travelling in the Far East region but worldwide travel is also to be expected.
Expected travel days per year: 160+ days.

Qualifications:

· You are educated as Marine Engineer, Automation Mechanic, Industrial Electrician or similar

· You have worked with boilers/steam plants

· You have worked onboard vessels

· You have experience with:

o Electrical fault finding in relay based controls systems

o Electrical fault finding in PLC based controls systems

o PLC systems, PID controllers, AC-Drives

· You have flair for understanding mechanics and electrical systems

· You are comfortable working on your own and capable of creating a structured work process

· You have extensive experience with the Microsoft Office programs and general PC use

· You are fluent in English both oral and written

Other qualifications:

· Passport, Driver’s license

· Hold a “Health Certificate for Seafarers and Fishermen / Discharge book” or can obtain one

· Never been refused a VISA application

· Clean criminal record

· Singaporean or PR