Responsibilities

• Responsible for improving manufacturing process and equipment capability to achieve higher production yield and quality
• Responsible in driving cost reduction programs through continual improvement activities
• Responsible for supervising plating technicians and operators in meeting manufacturing requirement

Requirements

• Min Degree in Chemical Engineering/ Mechanical Engineering or relevant
• Min 2 years of working experience in plating industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supervising and checking subcontractors’ works according to design drawings, specifications, shop drawings, method statement and local codes and regulations.
• Responsible for design calculation, cost estimation, preparation of plans and details engineering design.
• Responsible for coordinating with supplier / sub-contractor of the tender specification and obtain the quotation from them.
• Responsible for overseeing and be overall responsible for works carried out by junior supervisors assigned under their care.
• Responsible for keeping daily work record, including additional work claims to the clients and from the ubcontractors.

Requirements

• Min Diploma in Mechanical and Electrical Engineering or equivalent.
• Min 3-4 years of M&E working experience with main contractors.
• Strong knowledge of M&E details, working drawings and local construction practices
• Conversant with local codes and regulations.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Voice Engineer

Responsibilities:

· VOIP Domain Knowledge : Strong knowledge and experience in VOIP Protocols : SIP, H.323, RTP, RTCP, SRTP, TDM, MGCP

· Trouble-shooting Skills : Hands on debugging experience of GDB, call analysis through Wire Shark

· Develop, maintain and document the installation and configuration procedures.

· Contribute to and maintain system standards.

· To provide the end to end application support and maintenance to our existing customers.

· Coordinate with team, documentation, implementation, training and support

· Prepare, update and deliver regular project status update

​

Job Requirement:

• Degree in Information Technology IT/Telecommunication/Computer Science or equivalent.
• Strong knowledge of IVR and Contact Center technology
• Experience using and leveraging APIs
• Proficient in one or more development or scripting languages, such as Lua, with experience in software development.
• Strong knowledge of FreeSWITCH will be an advantage.
• Knowledge of networking concepts like Firewall Configuration, Switch Configuration, LAN Troubleshooting, Network Tracing, WAN etc.
• Experience in managing SBC and Media Gateway will an advantage.
• Knowledge of VOIP, installation, customization and development.
• Strong knowledge in IP Telephony & VoIP System (TCP, UDP, RTP etc) will be an
• advantage.

Essential Skills-

• Team player with good interpersonal and communication skills.
• Excellent analytical skills and high level of aptitude.
• IT Support experience will be an advantage.
• Independent, passionate, resourceful and able to work with minimum supervision.
• Able to start work immediately or with short notice.

Responsibilities:

• Responsible for Quality, speed, flexibility, and reliability of assigned commodities.
• Supports factory operations through fast resolution of supplier non-conformances, including short term containment, root cause identification, and long term, effective corrective actions.
• Work with cross functional teams to resolve supplier quality issues in a timely and systematic fashion.
• Ensure suppliers follow robust change management processes to maintain and improve product quality and production performance.
• Identify supplier related problems and improvement opportunities. Perform root-cause investigation, implement corrective actions improve supplier performance.
• Timely communication of supplier issues that affect product quality and delivery capability to the relevant stakeholders across the organization.
• Maintain lessons learned from various investigations to assist in development and sharing of best practice
• Acts as the internal expert on assigned commodities.

Requirements:

• Degree in Mechanical or Electrical / Electronics Engineering or any relevant.
• At least 5 years of experiences in handling suppliers, within manufacturing industry.
• Working knowledge and trained in Lean techniques; SPC, 6-Sigma (Green Belt) is an advantage
• Knowledge of ISO 9001:2015 Quality System and Working knowledge of Supplier and Process
• Good communication and interpersonal skills.
• Training and/or certification as Certified Quality Engineer (CQE) will be an advantage.

Work Location: 452 Alexandra Road, Singapore 119961

----------------------------------------------------------------------------

Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).

At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

COMPANY OVERVIEW:

Celestica (NYSE, TSX: CLS) enables the world’s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud.

Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.

Celestica would like to thank all applicants, however, only qualified applicants will be contacted.

Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Voice Engineer

Responsibilities:

· VOIP Domain Knowledge : Strong knowledge and experience in VOIP Protocols : SIP, H.323, RTP, RTCP, SRTP, TDM, MGCP

· Trouble-shooting Skills : Hands on debugging experience of GDB, call analysis through Wire Shark

· Develop, maintain and document the installation and configuration procedures.

· Contribute to and maintain system standards.

· To provide the end to end application support and maintenance to our existing customers.

· Coordinate with team, documentation, implementation, training and support

· Prepare, update and deliver regular project status update

Job Requirement:

• Degree in Information Technology IT/Telecommunication/Computer Science or equivalent.
• Strong knowledge of IVR and Contact Center technology
• Experience using and leveraging APIs
• Proficient in one or more development or scripting languages, such as Lua, with experience in software development.
• Strong knowledge of FreeSWITCH will be an advantage.
• Knowledge of networking concepts like Firewall Configuration, Switch Configuration, LAN Troubleshooting, Network Tracing, WAN etc.
• Experience in managing SBC and Media Gateway will an advantage.
• Knowledge of VOIP, installation, customization and development.
• Strong knowledge in IP Telephony & VoIP System (TCP, UDP, RTP etc) will be an
• advantage.

Essential Skills-

• Team player with good interpersonal and communication skills.
• Excellent analytical skills and high level of aptitude.
• IT Support experience will be an advantage.
• Independent, passionate, resourceful and able to work with minimum supervision.
• Able to start work immediately or with short notice.

Responsibilities:

• To manage and execute EMS/DMS SCADA projects and service contracts
• Carry out routine and corrective maintenance, software enhancement, bug fixes, testing and commissioning to meet contractual requirements
• Ensure smooth and proper execution of projects/contracts

Requirements:

• Minimum a Diploma in Electrical/Electronics/Computer/Software Engineering from a recognized local polytechnic or Degree in in Electrical/Electronics/Computer/Software Engineering.
• Preferably have some working experiences in executing/maintaining of SCADA and Substation Automation System.
• Strong software skills.
• Knowledge of UNIX OS and C, C++, Java programming language.
• Carrying out project works at night including standby duties are required.
• Travelling and executing of overseas projects are required.
• Possession of team spirit, good communication and organizing skills.

• Position :Application Engineer- BMS/HVAC/ACMV | Up to $4800+ VB
• Working hours : Monday to Friday | 8.30am to 5.30pm
• Location: Office in Boon Lay-Islandwide
• Salary (commensurate with experience) : Up to $4800 + AWS + Minimum 2-5 months Variable Bonus + 16 days Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Refrigerating, Air-conditioning & Ventilation Machinery - MNC

Main responsibilities

• To provide engineering support to the Project team from validation phase to project
• implementation
• To identify type of material and equipment requirement during validation phase.
• To involve in preparation and submission of engineering submittals.
• Programming of devices & creating and programming graphics in accordance with the project requirement.
• To assist in Test and Commissioning of system equipment.
• To assist in preparation and submission of operation and Maintenance Manuals.
• To provide Bill of Quantity for the projects.
• Any other duties as assigned by superior
• Ensure all works carried out in accordance with the specified quality and EHS standards

Requirements:

• Diploma/ Degree in Engineering or Building Control in relevant field
• Min 1-2 years of relevant work experience
• Experience in PLC programming is added advantage
• Experience in handling energy management systems/ HVAC systems/ Chiller Plant systems/ Building Management Systems will be a plus
• Knowledge of IT networking and database programming, Function Block programming,
• Structured Language Programming or HTML5 programming will be of added advantage
• Knowledge of industrial system protocols like BACnet, Modbus, LONTalk
• Bilingual in English and Mandarin to liaise with Mandarin speaking associates in view of business communications

Email to [email protected]

Do visit www.facebook.com/search.personnel for more job listings.

***We DO NOT charge our candidates any referral fee nor bind them with any contract.***

Joie Chang

Associate Consulting Director (APAC)

About Us

Green Link Digital Bank is Singapore's inaugural wholesale digital bank focusing on supply chain finance, mainly serving MSMEs and aiming to help MSMEs grow and improve digitization.

Responsibilities

• Provide onsite and remote End user support.
• Tracking & documenting support activities using ticketing system.
• Communicate and document troubleshooting techniques and best practices.
• Proactively understand, analyse, and research new technical problems when needed.
• Manage assets within the organization and perform tech refresh at stipulated periods.
• Implement applications and software upgrades, perform troubleshooting and fine tuning for users.
• Provide end user and technical support for Windows and Mobile OS, File and Print, Office365 services (SharePoint, OneDrive, Teams, and Active Directory etc.).
• Other ad-hoc duties assigned by supervisor.

Requirements

• Strong customer service skills with a knack for problem solving.
• Possess an aptitude for acquiring new skills and knowledge.
• Ability to prioritise tasks and work on multiple assignments in a fast-paced and highly challenging environment.
• Strong written and verbal communication skills and meticulous attention to detail.
• Experience in working with senior executives will be a benefit.
• Possess an understanding of the following:

o Operating systems

o Windows 7 & 10 ,11, iOS and Android OS Software and services

o Active Directory, file and print infrastructure

o Office 365, including Teams, SharePoint Online, OneDrive.

• Achieve success in team environment, demonstrating shared responsibility and accountability along with other team members.
• Fresh graduates are also welcomed.

Job Description:

1. Front-line support for customer inquiries and issues via email and phone;
2. Diagnose and troubleshoot product configuration and functional issues remotely and onsite;
3. Effective escalation to Level 2 or product vendor for action and resolution;
4. Able to handle flexible working hours on demand basis; and
5. Maintain rapport with customers and competence in managing vendors; and
6. Any other ad-hoc duties assigned.

Job Requirement

• Degree/Diploma in Computer Science / IT Technology or equivalent
• Exposure to networking and security solutions such as firewall, load balancers, endpoint protection will be an advantage
• With working experience in an SI or distributor environment with network security skillset is a plus
• Good IT Knowledge in OSI Layer,TCP/IP, LAN/WAN and network security
• Ability to work under pressure with minimal supervision
• Excellent in communication and analytical skills
• Positive working attitude and team player
• Willing to work extended office hours when needed
• Fresh graduates are welcome to apply

We are looking for a Systems Engineer to help build out, maintain, and troubleshoot our rapidly expanding infrastructure. You will be part of a talented team of engineers that demonstrate superb technical competency, delivering mission critical infrastructure and ensuring the highest levels of availability, performance and security. Qualified systems engineers will have a background in IT, computer systems engineering, or systems engineering and analysis.

System Engineer

Primary Responsibilities:

• Providing system support, maintenance, troubleshooting and resolving IT technical issues.
• Involve in project implementation, planning, testing and commissioning.
• Generate documentation, tests plan, service reports and RCA
• Prepare, update and deliver regular project status updates

​Qualifications and Skills Required:

Technical Skills-

• Diploma/Degree in Information Technology IT/Telecommunication/Computer Science or equivalent.
• Strong knowledge of networking concepts like Firewall Configuration, Switch Configuration, WAN, LAN and VLAN Troubleshooting, Network Tracing, DNS, DHPC, IPsec etc.
• Familiar with Cloud Technologies and IT security policy would be an advantage
• Familiar with Windows Server OS and database MSSQL
• Basic knowledge in IP Telephony & VoIP System (TCP, UDP, RTP etc) will be an advantage.

Essential Skills-

• Well organized team player with good interpersonal and communication skills.
• Excellent analytical skills and high level of aptitude.
• Independent, passionate, resourceful and able to work with minimum supervision.
• Training will be provided.
• Able to start work immediately or with short notice.

Job Description:

• Direct the efforts of the product/process engineering function, including supervision of the engineers, setting up the NPI process, procedures and reports. Provides project and team leadership for the Process Engineering Group and also will be responsible for evaluating, monitoring and providing high level guidance and leadership.

Essential Duties and Responsibilities:

• Lead a team of product/process engineers to support complex server/storage system CTO/BTO operations.
• Design and develop technical procedures for production and customers.
• Provide technical support to Engineers/Technicians and customers to solve complex problems
• Lead and/or support automation and kaizen projects in production line
• Provide technical documents written for product/process support and perform changes to the documents, provide training to production and review the effectiveness for enhancement.
• Manages and coordinates activities of Product/Process Engineering Team, including periodically process compliance internal audit and customer audit, and drive for proper closure and effective continuous improvement.
• Support 5S and lean initiatives.
• Perform all other duties, as assigned.

Job Knowledge, Skills & Abilities

• Ability to read and correlate schematic diagrams and layout drawings.
• Familiar with PDM and BOM structure
• Good knowledge in SAP, 8D, PDCA and PFMEA
• Excellent in analytical, organizational and interpersonal skills
• Must be a team player and highly motivated.
• Flexibility and ability to change priorities.
• Ability to multi-task with strong sense of urgency; ability to meet deadlines.

Experience/Education

• Bachelor degree in in Electrical / Electronic Engineering
• Minimum 5-year experience in manufacturing engineering or relevant field
• Prefer to have server/storage product top level assembly experience

OTHER INFO:-

• Work Location: 452 Alexandra Road, Singapore 119961 [Near Labrador Park MRT]

-----------------------------------------------------------------------------

Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).

At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

COMPANY OVERVIEW:
Celestica (NYSE, TSX: CLS) enables the world’s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud.

Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.

Celestica would like to thank all applicants, however, only qualified applicants will be contacted.

Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Duties & Responsibilities

• Understanding of Client’s requirement, including clarification with Client and relevant disciplines as necessary.
• Preparation of specifications, datasheets and inquiry documents.
• Perform all discipline engineering assignment and design work independently.
• Perform technical bid evaluation.
• Evaluation of Vendor Proposals and finalizing technical requirements for purchase condition including evaluation of deviations.
• Review of Vendor documentation, vendor management and control of vendor schedule and information.
• Provide technical requirements and assessment for inspection and QC related matters.
• Participate in site surveys, provide technical support during construction stage.
• Handle interface matters and coordinate with relevant parties.
• Attending shop test/inspection and review of test reports.
• Site technical support for field installation, field testing, pre-commissioning, commissioning as necessary to achieve completion of project and handover to Client.
• Work Planning, manpower and man-hour planning and control.
• Coordination and change management within department, inter-disciplines and Client, Vendors.
• Resolution of Project issues with internal/ external parties.

Requirements:

• Degree with at least 10 to 15 years’ of experience in Rotating / Package equipment design, installation and commissioning/start-up.
• Experience in handling API compressors, steam turbines for actual implementation project from design to field startup.
• Experience with API pumps, fans and blowers.
• Work as Lead Rotating / Mechanical Engineer function for in same industry in EPC function.
• Experience with handling other package equipment in actual projects.
• Field work experience.

Interested parties, please send in your detailed resume.

Responsibilities

• Responsible for ensuring products produced meet the product and customers' quality requirement
• Responsible for developing and improving the processes to gain productivity, efficiency, quality and costs.
• Responsible for coordinating NPI/NPQ activities with details and meeting timeline.
• Responsible for supporting and resolving daily technical issues in operations
• Responsible for supporting analysis of failures from yield loss, reliability failures, new products, new materials.

Requirements

• Min Diploma in Electronic Engineering, Material Science or relevant
• Min 5 years of working experience in semicon assembly and test environment
• Experience in Assembly FOL of dicing, die attach, wire bond
• Experience in maintenance of assembly and test machines of dicing, die attach, wire bond encapsulation, testing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Jane Neo

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for improving manufacturing process and equipment capability to achieve higher production yield and quality
• Responsible in driving cost reduction programs through continual improvement activities
• Responsible for supervising plating technicians and operators in meeting manufacturing requirement

Requirements

• Min Degree in Chemical Engineering/ Mechanical Engineering or relevant
• Min 2 years of working experience in plating industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Jane Neo

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing and developing windows applications in .net technologies mostly used for manufacturing equipment
• Responsible for developing solutions to improvise performance & scalability of systems
• Responsible in full system development life cycle
• Responsible for conducting applications training and handle enquiries for technical issues
• Responsible for supporting on site installation, debugging and hand technical support

Requirements

• Min Diploma in Information Technology or related
• Min 2 years of working experience in C#, C++, .Net
• Experience in developing windows Based application

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Jane Neo

Registration Number: R1328870

EA License No. 22C1026

Responsibilities:

• Create 3D BIM models for the respective disciplines (architecture, civil & structural engineering, mechanical engineering, electrical engineering) with ArchiCAD based on designs by the architects and engineers, including the validation of the level of detail, accuracy of the model content and model quality control before the release or exchange of models with other parties
• Assist architects and engineers to ensure compliance with the various design and regulatory requirements of the respective disciplines (architecture, civil & structural engineering, mechanical engineering, electrical engineering)
• Implement Virtual Design & Construction methodologies, processes and standards for the respective disciplines (architecture, civil & structural engineering, mechanical engineering, electrical engineering) as documented in the project VDC Execution Plan
• Coordinate with other disciplines and stakeholders (e.g. contractors) on the implementation of Virtual Design & Construction, particularly the appropriate data flow within the discipline and with other parties according to the project VDC Execution Plan
• Participate in coordination meetings and 3D review sessions

Requirements:

• Diploma, Higher NITEC or NITEC in the respective disciplines (architecture, civil & structural engineering, mechanical engineering, electrical engineering) or other relevant fields, good interpersonal skills, be meticulous and independent, have pleasant disposition and effective communication skills
• Minimum 1 year of relevant experience in the: creation of 3D BIM models using BIM authoring software for Singapore building projects (preferably with experience in modelling HDB projects); and / or Tier 4 Digital Delivery Management (DDM) Accreditation by buildingSMART Singapore (bSS) will be an added advantage
• BIM-related certification from BCA Academy or equivalent
• Well-versed in ArchiCAD (completed the advanced training) and AutoCAD, and well-versed in Revit will be an added advantage. Candidates will be required to pass a modelling competency assessment in ArchiCAD
• Knowledge of Rhino and Grasshopper will be an added advantage

Responsibilities

• Responsible for development of new products and product improvements
• Responsible in performing the whole cycle of product design
• Responsible for designing and devleoping of quality product and ensuring manufacturability with other engineering functions involved in product development.
• Responsible in ensuring product designs are validated per customer requirements, respecting international industry standards

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in Product Design Development
• Proficient with Pro-Engineer/ CREO/ANSYS/ Autocad

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Jane Neo

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for developing of test scripts, issues tracking and test management
• Responsible for conducting qualification test of new product or revised component with issuing of test report and recommendations to the test findings
• Responsible for testing accordance to applicable product standards, guidelines, regulations and dormakaba Corporate Standard (DCS)
• Responsible for preparation of samples and coordinate with PQS EN or certification bodies for product certification
• Responsible for evaluating and analysis of competitors’ products – teardown analysis, VA/VE

Requirements

• Min Diploma in Engineering or relevant
• Min 2 years of working experience in production quality or test lab.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Jane Neo

Registration Number: R1328870

EA License No. 22C1026

Job Description:

· Work with Subcontractors and Product Management to develop specifications and ensure that finished products meet CTS products and quality standards.

· Work with the Sales team, Product Management, and Subcontractors to develop new product data sheets.

· Work with Subcontractors and Development Engineering on design tweaks and product line extensions.

· Coordinate test and parametric data to support new design releases.

· Provides technical support including product cross-reference

and technical information to customers including RoHS compliance information.

· Responsible for Subcontractors’ change management.

· Conduct periodic reviews and benchmark subcontractors’ capabilities to ensure the best quality, beneath product offerings and competitive costs.

· Supports Customers’ roadmaps and ensures our product strategies match our customers’ requirements.

· Responsible for Conflict Minerals reporting and template

· Assist in updating materials master, bill of materials, and routers in SAP

· Maintain ESD precautions and proper handling procedures in the Lab, including equipment calibration.

Requirements:

· Degree in Electrical/Electronic Engineering.

· More than 5 years of manufacturing experience.

· Knowledge in PCB’s layout and schematics.

· Able to handle electronic test equipment such as: Frequency counters, oscilloscope, phase noise tester, spectrum analyzer and multimeter is added advantage.

· Capable of managing and prioritizing multiple projects/tasks.

Responsibilities

• Responsible for attending the customer complaints and develop resolution
• Responsible in planning and coordinating with the Production on non-conformance product screening as well as conducting containment measures and minimizes DMR issued by customers
• Responsible for providing engineering support to Internal Departments related to quality and technical issues

Requirements

• Min Degree in Mechanical Engineering or its equivalent
• Min 1 years of working experience in process or fixture designs

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Jane Neo

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supporting new product development, new product introduction and cost out designing for existing product lines through sound execution of engineering principles and processes
• Responsible in interfaces with design engineering in coordinating the release of new products.
• Responsible for estimating manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.

Requirements

• Min Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Jane Neo

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing new products and processes
• Responsible in identifying areas for improvement, maintaining high levels of manufacturing and product quality
• Responsible for ensuring cost-efficiency and conformance with regulatory standards.

Requirements

• Min Degree in Electrical & Electronics/ Mechanical/ Electromechanical/ Mechatronics/ Optics and Photonics Engineering or relevant
• Min 2 years of working experience in manufacturing/ production industry
• Experience in optics/ lasers/ optical microscopic imaging/ multi-channel fluorescence system used in analytical equipment is an added advantage.
• Experience in using multi-meter, function generator and oscilloscope.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Jane Neo

Registration Number: R1328870

EA License No. 22C1026

Job Description & Requirements

1. Coordinate maintenance contractors, review checklists and ensure customer D.O. sign-off within the time.

2. Support Data analytics team with ongoing improvement on automation of data gathering, analysis and reporting, including fault detection and root cause identification

3. Prepare and maintain comprehensive energy conservation action plan to include previous and ongoing efforts and short, intermediate and long-term goals

4. Prepare operational and maintenance schedule as per MIS

5. Work closely and collaborate with the customer support team to ensure customer satisfaction.

6. Identify potential upselling opportunities at client site during regular or ad-hoc maintenance

7. Remote monitoring of the system operation and performance and reach site if any emergency.

8. Familiarization of Refrigeration System Chillers & Freezers, Compressors, Cooling towers, FCUs, Cold room, ETV doors and related controllers.

9. Working with a team and deliver the work within the planned schedule.

10. Collect the onsite operating parameters like cold room and space temperature and verify with SCADA.

11. Collaborate with Internal teams regarding any controls and programming related onsite works.

Qualifications

1. Diploma, Bachelor of Engineering Mechanical, Electrical or Equivalent

2. Electrical or Mechanical troubleshooting experience would be advantageous

3. HVAC knowledge of Chiller Plant, FCU, SCADA, Air side equipment

4. Strong communication and analytical skills.

Job Responsibilities:

• Project Management and Quality Improvement
• Develop or port new technology and transfer to Fab for mass production
• New project technology specification integration, process selection and development schedule adjustment
• Design rule compilation, process and equipment monitoring structure design, review and preparation
• New product tape out, pilot
• Process and device window inspection
• Systematic process problem solving
• Lead junior engineers to complete assigned tasks

Job Requirements:

• Candidate must possess at least a Bachelor's Degree in Electrical/Electronic, Chemical or Materials Science Engineering or equivalent.
• At least 2 year(s) of working experience in the related field is required for this position.
• Work Independently and ability to work in a culturally and generationally diverse team
• Excellent communication skills including report writing, and presentation skills are a must.

Responsibilities

• Responsible for leading root cause analysis & corrective action in nonconformance part investigation
• Responsible for establishing quality inspection plans, COC, procedures/ work instructionsHandle customer/supplier/ internal CARs
• Responsible for planning, coordinating & performing internal audits
• Responsible for performing gap analysis on standards revision and revise procedure/ work instructions
• Responsible for attending to customer/ supplier/ internal /certification audits & technical queries.

Requirements

• Min Diploma in Mechanical Engineering or equivalent
• Min 3 years of working experience in Oil & Gas/ Metal Machining Industry
• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Jane Neo

Registration Number: R1328870

EA License No. 22C1026