REPORTING TO:

Maintenance Manager

General Scope :

• Support in implementation and participate in the continuous improvement effort in the areas of Safety, Quality, Environment and Health Management System (for example SS506 part 3, ISO 9001, ISO14001, OHSAS 18001, IATF 16949).
• To have a legal obligation to act in a responsible manner for the safety of themselves and other persons who may be affected by their actions or omissions at work.
• Assist the Management in ensuring that Major Accident Hazards are reduced to As Low as Reasonably Practicable (ALARP) and escalate when necessary.
• Ensure compliance to Customer Specific Requirements (CSR).

Main Duties & Responsibilities :

• Manage day-to-day maintenance services of electrical and field instruments in the process plant.
• Lead in the investigation/trouble-shoot of instrument fault or failure and provide effective and viable corrective and preventive action.
• Analyse and improve equipment reliability of plant to prevent recurrence with production group and contractors.
• Good knowledge and hand-on experience with DCS and PLC system.
• Prepare long-term maintenance plan for plant instrument, CV, Motor & Electrical Equip etc.
• Manage annual shutdown maintenance (Work planning, Management of actual site work, Liaising with contractors and production group).
• Manage in-house contractors to execute maintenance timely and effectively.
• Manage inventory control, quality of in-house contractor and vendor work.
• Responsible to ensure ISO/Mandatory calibration document, instrument files and work order documentation is timely complete with accurate in accordance with SOP
• Develop, revise and review of SOPs for maintenance/inspection of plant electrical and instrumentation equipment (eg. TI, TT, PI, PT, CV, on/off valve, motor, Switchgear, MCC etc.).
• Prepare documentation pertaining to procedures, qualities and safety of maintenance work.
• Ensure all maintenance activities comply with EHS policies.

REQUIREMENTS

• Degree in Electrical, Electronics, Instrumentation engineering or the equivalent.
• Min 5 years of experience as an E&I Engineer in chemical plant.
• Basic understanding of maintenance technology, equipment, instruments, electrical and manufacturing process.
• Demonstrate ability to manage contractors/vendor independently and effectively.
• Good interpersonal and communication skills.

PT Trakindo Utama Singapore Branch is expanding! The Power Systems department is looking for two exceptional project engineers to bolster the department's capabilities! Aspiring applicants can look forward to a dynamic career, engaging stakeholders on all aspects of their electrical needs, and to exercise their creativity and robustness in delivering solutions and customizations! Our office is located just 6 minutes away from Tuas Crescent MRT, within walking distance from the MRT Exit.

We invite aspiring applicants to join our team, and experience the prestigious legacy of our Company, let's advance forward together!

Primary Objective of Position

• Responsible for all electrical aspects and management of projects, including tendering, design, drawing, scheduling, purchasing, testing, packing, shipment and commissioning of power generation sets on site.

Duties & Responsibilities

• Coordinate all electrical interfacing of designated projects to meet specifications
• Instruct draughtsperson to prepare electrical drawings for tender replies and awarded projects according to customers' specifications
• Review returned drawings and modify as required for construction
• Coordinate with contractors on genset build up
• Provide specifications for control panels, generators and switchgears to vendors
• Liaise with vendors for quotations to procure/fabricate
• Coordinate with Parts Dept on order for CAT parts
• Assist with final technical inspections and testing of equipment
• Prepare packing list and coordinate with HPL on packing, delivery and shipment
• Perform on site commissioning as and when required
• Prepare project costing and report to the Project Manager
• Attend/Conduct engineering and project meetings both in Singapore and overseas (when required)
• Perform calibration of electrical items
• Assist in review and update of department procedures and manuals
• Fulfill other adhoc duties as assigned by Management

Person Specifications

• Possess a degree in Electrical/Power Engineering or 2 years of related experience in Power Generation Engineering and/or Project Management
• Proficient in Microsoft Office applications
• Knowledge in electrical aspects of power systems and control panels

Job Description

• Perform in-house and on-site measurement and data recording as part of the instrument calibration process
• Perform data and certificate processing as part of the instrument calibration process
• Responsible for the proper operation and maintenance of calibration equipment and devices
• Adhere to calibration procedures and methods to meet the professional calibration service standard being delivered by the company
• Function as part of a larger team to meet customer's requirements in a timely and effective manner
• Function as part of a larger team to ensure proper housekeeping and maintenance of the laboratory/working areas
• Assist in the development and extension of new calibration scope

Job Requirement

• Candidate must possess minimum NITEC certificate. Higher NITEC or Diploma in Instrumentation / Engineering or equivalent is an advantage
• Experience in measuring instruments or calibration is an added advantage
• Able to perform calibration work in different customer’s premises when required, as part of the on-site calibration team
• Proficiency in Microsoft Office (Excel) for capturing and processing measurement data
• Willingness to learn/upgrade and commit to meet assigned tasks in a timely manner
• Able to perform some OT when required
• Able to function as a team, and interact with colleagues and customers well
• Proper training will be provided for the expected job scopes
• Entry level candidates are welcomed to apply
• Able to start work immediately or on short notice is preferred

**With regrets, we do not entertain recruitment agency**

ESSENTIAL DUTIES & RESPONSIBILITIES:

• Processes and tracks Submittals to owner, contact subs for items to be submitted
• Processes and tracks formal correspondence with Clients and Subcontractors
• Preparing, scheduling, coordinating and monitoring the assigned engineering projects.
• Interacting daily with the clients to interpret their needs and requirements and representing them in the field.
• Coordinate between clients, site team & factory team
• Request for information, follow up with owner response to sub requesting information
• Keep track of all Extra Work Orders and liaise with Project Admin for costing
• Perform overall quality control of the work (budget, schedule, plans, personnel’s performance) and report regularly on project status
• Assign responsibilities to workers
• Assists Safety Department with inventory maintenance of PPE on site
• Cooperate and communicate effectively with project manager and other project participants to provide assistance and technical support
• Review engineering deliverables and initiate appropriate corrective actions
• Minor transport arrangement
• Familiarity with rules, regulations, best practices and performance standards
• Ability to work with multiple discipline projects

ESSENTIAL JOB QUALIFICATIONS

REQUIRED SKILLS: Advanced Proficiency in MS Office Suite including Word, Excel, and PowerPoint. Sufficient knowledge of design and visualisations software such as AutoCAD, B.Sc degree in Engineering or relevant field

PREFERRED SKILLS: Driving License, Project management and supervision skills, Decision making ability and leadership skills

EDUCATION AND EXPERIENCE: This position requires no years of experience performing work in the role of Project Engineer or similar position. A B.Sc degree in a related field of study is preferred but not required for candidates with proven past work experience.

PHYSICAL DEMANDS: To successfully perform the essential duties of this position, an individual must be able to sit at a desk for 2 or more hours per day, and frequently walk around the site to coordinate, monitor job schedule

LIMITATIONS AND DISCLAIMER: The above job description is meant to describe the general nature and level of work being performed; it is not intended as an exhaustive list of all duties, responsibilities, and required skills for the position. Employees will be required to follow any other job-related instructions and to perform other duties requested by their supervisor.

Requirements are representative of knowledge, skills and/or abilities necessary to perform each duty proficiently. Continued employment remains on an "at-will" basis.

COMPANY DESCRIPTION

REC Group is an international pioneering solar energy company dedicated to empowering consumers with clean, affordable solar power through high-quality solar panels with a leading power density. As Solars Most Trusted, REC is known for its patented innovations and multiple award-winning products with reliable long-term performance. The cornerstone for RECs strong reliability is advanced and highly efficient manufacturing using Industry 4.0 practices. Founded in 1996 in Norway, REC has always been committed to a low carbon footprint in its solar materials and panels. REC is headquartered in Norway with operational headquarters in Singapore and regional hubs in North America, Europe, and Asia-Pacific. As of December 2021, REC is part of Reliance Industries Limited, Indias largest private sector company with revenues of USD 104.6 billion.

Find out more at recgroup.com

RESPONSIBILITIES

We are looking for a proactive, independent and highly adaptive individual to be part of our Global Engineering Expansion team.

The position requires one to be comfortable working in a cleanroom manufacturing environment, have good project management, process and integration skills and mindset for continuous improvement.

Selected candidate will be required to work closely with different stakeholders (Vendors/equipment/technology/operations) to introduce new technology or processes and ensuring its stability after implementation.)

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Key Responsibilities:

SAFETY:

• Perform risk assessments to ensure all measures are taken to prevent injuries or accidents before commencing any work.
• Identify and report any hazard.

Project:

• Initiate and lead projects relating to cost reduction, efficiency/power, and reliability improvements.
• Work with stakeholders from cross functional teams to establish the project timeline, the execution plan and identify the resources required.
• Identify any risk pertaining to safety as well as any potential delay and provide alternative solutions to the issue.
• Ensure the timely completion of key milestones as well as delivery of key project indicators.
• Lead in resolving any quality issues and providing timely updates on the progress.
• Perform data analysis to identify opportunity for improvements or support any ongoing investigations

Benchmarking:

• Familiarize with current market news and trend
• Perform benchmarking studies to understand various vendor and competitor cell performances.

ADDITIONAL RESPONSIBILITIES:

Research:

• Perform research on improvement ideas and carrying out experiments to test hypothesis.

• Degree in Materials / Chemical Engineering
• Knowledge in semiconductor/solar cell and module processes preferred.
• Strong knowledge and experience in process integration & development methods
• Knowledge in PFMEA, DFMEA, DOE, Fish-Bone Analysis,
• Strong technical analysis competency with the use of analytical tools like JMP, Mini-Tab for troubleshooting and datamining
• Ability to work in a fast-paced environment and render support to production as and when needed.
• Strong in organization and project management
• Good communication skill.
• Commitment to get issues resolved and provide updates in a timely manner
• Dynamic & committed with proactive working attitude
• Ability to initiate without being asked
• Challenging spirit to improve current conditions
• Highly effective personal skills communication and organization
• Good Team player
• Well versed in programming to develop advance data mining and analysis capabilities.
• Electrical characterization and physical characterization/ Failure Analysis tools for systematic troubleshooting and improvement.

Today, Lonza is a global leader in life sciences operating across three continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

As a Senior Process Validation Engineer, you will be responsible for leading the execution of PV activities/studies to support the timely and successful validation of new technology transfers into Lonza Singapore production facility and validate changes or continued validation for commercial customers.

The role will lead in the preparation for PV activities (ordering of materials, training) for assigned customer projects per pre-defined schedule and lead investigations into PV related discrepancies and deviations.

Responsibilities

• Lead in the execution of PV activities/studies that validate changes or continued validation for commercial customers, in accordance with approved SOPs / Policies / Regulatory requirements for Lonza Singapore
• Author validation protocols and reports
• Develop Validation Plans and ensure the validation execution activity meets scheduled timelines.
• Participate in review and approval of PV Protocols / Reports. Review minor/ major deviations.
• Provide floor and on-call support and coordination for PV activities being executed on the production floor. Maintain oversight of on-going PV activities on the production floor. Escalate issues to management appropriately and interface with customer on issue resolution. Follow all applicable MFG safety policies.
• Lead in the preparation for PV activities (ordering of materials, training) for assigned customer projects per pre-defined schedule.
• Lead investigations into discrepancies and deviations, author discrepancy reports or minor/major deviations.
• Identify and drive implementation of process improvements as required.
• Lead in the preparation of CPV reports and support preparation of APR.
• Perform work-stages review as required, to support customer BLA filing.
• Support change implementation on site and Manage change control implementation for changes that are driven by PV studies/improvement.
• Participate in inspections and audits by internal QA, customer and regulatory authorities as required.
• Review & assess Site Change Controls, implementation of Validation CAPAs and subsequent closure.
• Represent PV as a team representative in IPT/JPTs.
• Participate in on-job training program for staff and provide guidance to team members as required.
• Any other duties as assigned by your supervisor/manager.

Requirements

• Degree or higher from recognized institution in Engineering/ Science.
• 5 to 7 years’ experience in Validation unit or a related manufacturing environment in the Biopharmaceutical industry.
• Familiar with Regulatory requirements and local Codes & Standards (e.g., FDA, EMEA, GAMP and ICHQ7).
• Good knowledge and experience of the practical and theoretical requirement of validation program in GMP facility.
• Excellent oral and written communication skills, action orientation, and ability to work well in a cross-functional technical environment.
• Exhibit good quality decision making traits.
• Team player who can operate independently, with strong focus on safety, quality and timelines.
• Demonstrated track record in completing projects under tight timelines.

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

• Daily Update of Project/Operation Progress to immediate superior.
• To have and maintain good daily attendance and punctuality.
• To update team member at least 2 working days in advance before going for leave, in order to minimize downtime.
• Supervise and oversee the work of Electricians and Instrument Techs, responsible for training and testing, responsible for maintenance of and compliance with electrical safety program, including LOTO System.
• Must have working knowledge of all applicable electrical industry standards and recommended practices, e.g. NEC, IEEE, ANSI, ISA, NEMA, CP5 etc.
• Must have the knowledge and experience of instrumentation used to control and monitor processes in the chemical processing/Oil & Gas industry.
• Must have hands on knowledge and experience with various types of instrument and electrical systems, equipment and software.
• Experience and ability to manage electrical and instrumentation engineering projects with knowledge of how to establish estimates for VO/Change Order works.
• Managing, allocating resources and ensuring completion of E&I work orders.
• Leading the electricians and instrument techs in finding and executing solutions to E&I problems on site.
• Planning and organization of some non-capital E&I project work, including plant shutdowns/TAR works.
• Able to have understanding the control system architecture and software sufficient to find and modify elements.
• Communicating with Project Engineer/QC engineer to validate and document all changes and highlight to PM for changes that shall involve additional works.
• Nominating and training Instrument/Electrical Techs capable of doing works well.
• Assist to set out detailed works as per the contract drawings, ensuring checks are carried out on a regular basis.
• Ensure that records are accurate and comply with organisational and legal requirements as well as project requirements.
• Resolve any unexpected technical difficulties and other problems that may arise at any time.
• Produce procurement schedules for the jobs and liaise with the procurement department to ensure site have adequate resources to complete the tasks.
• Produce ITP’s with QC Engineer and Task Briefings.
• Produce 2 week look ahead in conjunction with the Site Agent.
• Comply with company procedures and legal obligations.
• Promote and comply with environmental compliance.
• Deliver the works safely and to deadline.
• Promote best practice for Safety , Quality and Productivity.
• Ensure work is delivered defect/snag free.
• Endeavour to spot and highlight value engineering opportunities and innovaive ideas and closely working with CM.
• Coordinate with client and other Contractors for the project interface activities.
• Managing project scope and change control with commerical or without commercial impact.
• Monitor and ensure supervisor plan and instruct and monitor in DWI.
• Update and report daily progress status and lookahead minimum 3days plan with Supervisor.
• To Accurate and timely setting out of the works.
• Timely handover of works and Quality records without outstanding defects.
• Production of accurate records, drawing registers and weekly Reports.
• Must have good relationship with Site team & client technical representative.
• *FRESH GRADUATES ENCOURAGE TO APPLY*

Structural Steel Engineer Detailer is responsible for drawing preparation, submission and detailed drawings for steel fabricators and steel erectors, prepares detailed plans, drawings and other documents for the manufacture and erection of steel members used in the construction and monitoring the progresss of fabrication of projects and ensure compliance with construction safety regulations and quality standards, to check the factory workers in safety postition,safety distance,make sure workers are in safe place for producing the work progress

You are responsible for completing end-to-end planning and coordinating all the manufacturing processes for a specific project. Work closely with internal stakeholders regarding manufacturing capabilities, production schedules, and other considerations to ensure that manufacturing can meet cost, quality, and delivery requirements.

Develops, evaluates, and improves manufacturing methods, utilizing knowledge of product design, materials and parts, fabrication processes, tooling, and production equipment capabilities, assembly methods, and quality control standards. Analyzes and plans workforce utilization, space requirements, and workflow, and designs layout of equipment and workspace for maximum efficiency.

Analyze gaps between actual production time and standard time and discuss with Process Engineering for a resolution. Assures product and process quality by designing testing methods; testing finished- product and process capabilities; establishing standards; confirming manufacturing processes and developing cleanroom control and contamination control protocol and ensuring compliance.

Requirements

• Diploma/ Degree in Engineering or Engineering Technology; Industrial or Mechanical preferred

• Minimum of 3 years of experience in the manufacturing engineering field, preferably in a manufacturing assembly environment

• Strong leadership and entrepreneurial abilities

• Good communication and organizational skills

Salary

$2,000 - $4,000 a month

Job type

Full-time

Responsibilities: -

• Provide technical support to Operating Plants for safe & smooth plant operations
• In charge of daily chemical & mechanical processes.
• Initiate and implement plans for performance improvement and economic / capacity optimization
• Perform plant simulation to identify high return opportunities to business team
• Draft process improvement idea with the objectives to improve process / occupational safety, improve product safety / quality, reduce energy consumption, improve production capacity / productivity, and reduce costs.
• Implement Process Improvement idea via Management of Change system and/or Non-regular work system.
• Evaluate process performance and key process parameters from long term view and/or periodically to uncover potential risk that may leads to Plant instability, Safety or Quality issues.
• Troubleshoot plant trouble related to process, perform root cause analysis and propose corrective and preventive measures as process engineering function and/or based on request basis.
• To in charge of equipment calibrations.
• To update production output regularly.
• All other ad-hoc duties as assigned

Requirements: -

• Min Diploma or with min 3 years relevant working experience can be considered as well.
• Competency in Microsoft applications including Word, Excel and Outlook.
• Able to liaise with English and Mandarin speaking customers
• 5.5-days work week.
• Location: Tuas South
• Able to start work immediately
• PR/Singaporean/EP (only)

Thales Singapore Engineering Competence Centre (ECC) is a well-established R&D and engineering centre serving major customers worldwide in Digital Identity and Security domains ranging from mobile connectivity, IoT, banking & payment to government solutions.

As a Software Engineer in Thales Embedded Product Development Team in ECC, you will participate in the design, implementation, validation and deployment of Embedded Products for major OEM customers.

A week in the life of an Embedded Software Engineer:

• Develop, validate and deploy new software components (for example advance software security mechanism and next generation IoT connectivity protocols) for embedded operating systems targeted for mobile and IoT devices, in applications such as mobile payment, digital identity and IoT connectivity
• Participate to the development of next generation operating systems for future devices
• Being in agile development environment to work closely within team and multiple teams around the world to build great products exceeding customer expectations
• Contribute to continuous product and development methodology improvement

Knowledge, Skills and Experience:

• Degree in Electrical/Electronics/Computer Engineering, or related fields
• Proficient in C/Java programming languages
• 2-5 years of experience in embedded software development
• Knowledge of embedded technologies/ecosystem, software security or Javacard knowledge is a plus
• Team player with good communications and collaborative skills

· Lead in the preparation of detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Lead in the coordination with other disciplines in preparation of design deliveries.

· Lead in preparing tender documentations.

· Participate in the tendering of projects.

· Participate in the successful delivery of projects.

· Training and mentoring juniors.

· Design management, coordination and project control on major projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· A minimum of 5 years of design experience.

· Conversant with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Have good knowledge of common structural design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures)

· Good project management skills and strong analytical skills

· Able to work under pressure with good time management skill

Geotechnical:

- Experienced in the design and design management of major earth retaining and stabilizing structures, deep foundations, reclamations, ground improvements, slope stabilities.

- Familiar with the preparation of Geotechnical Interpretative Reports.

- Familiar with the geotechnical impact assessment of structures and instrumentations.

- Familiar with the application of geotechnical FEM software.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact telephone number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Job Description

Job Scope For Engine Technician

Engine technician, maintain and repair machinery on vessel. You will be responsible for ensuring functionality and reliability of machines, engines and mechanical systems with the instructions from supervisor. Engine technician must have manual dexterity and great attention to detail. They must be able to work with various machines and tools as well as follow all safety precautions.

The main job scopes were as follow.

• Familiarity with parts and components of engines, gearbox and machinery as well as the tools to fix them.
• (knowledge on 2 stroke and 4 stroke engine)
• Follow repair procedure and instruction from supervisor to carry out overhauling of components and provide great customer service
• Perform routine maintenance and general technical work on engine.
• Ensure overhauling of engine/machines meets vessel planned schedule.
• Ensure safety during work assignment.
• Ability to follow established procedures and practices and read instruction manual.
• Maintain & Ensure instrumentation devices with valid certificate and in good operating condition before use. (All lifting equipment and working tools)
• Report problems or concerns to supervisor immediately
• Accomplish organization mission by completing related results as needed
• A positive “can do” attitude to achieve company’s goals.

Requirements:

• Requires an ITE/Diploma certificate or its equivalent.
• Preferred with relevant experience within the engine overhaul industry, but not mandatory.
• Able to work well in a team with good interpersonal skills.
• Works under moderate supervision.
• On job training will be provided.
• For candidate who have a higher experience will be considered to a senior role.
• Salary will commensurate according to experience & qualifications.

Additional Information:

• 5 days’ work week.
• Transport provided.
• Variable bonus and better medical benefits.
• Career growth & learning opportunity.

Please send your application with availability, current & expected salary. We regret that only shortlisted candidates will be notified. Thank you for applying.

• Daily Update of Project/Operation Progress to immediate superior.
• To have and maintain good daily attendance and punctuality.
• To update team member at least 2 working days in advance before going for leave, in order to minimize downtime.
• Ensure to know project scope of works and meet the clients needs as per project standard and requirements.
• Together with site supervisor, review and ensure that engineering drawings issued for construction should be completed with site constructability.
• To learn on how to Check and to review issued BOM (Bill of Material) MTO’s for discrepancies and any non-construability or discrepancies shall be follow up and take actions.
• Together with material controller personnel in charge and manage for the respective construction areas to maintain an efficient and effective workflow and minimize wastage of all construction material and equipment.
• Immediate action if have any material shortage that is highlight from construction team and resolving any areas of concern at site as soon as possible.
• To learn on how to Coordinate for site arrangment to resolve any unexpected technical problem and liase with client personnel if have any engineering problem or design issues, if requested.
• Together with HSE personnel to resolve and close any finding at site.
• Together with QA/QC personnel to resolve and close any finding at site.
• Ensure that records are accurate and comply with organisational and legal requirements as well as project requirements.
• To learn on how to Set out detailed works as per the contract drawings, ensuring checks are carried out on a regular basis or MTO.
• To learn on how to Prepare and develop MSRA before start execution any activity.
• To learn on Possess of techical knowledge, skills and international standards (eg. ASME, API etc)
• To learn on how to Oversee and monitor works progress as per project schedule.
• Update and report daily progress status and lookahead minimum 3days plan.
• Learn and conduct tool box meetings.
• *FRESH GRADUATES ENCOURAGE TO APPLY*

Automation Engineer (Night shift)

12-month contract

About the Company:

Our client is a US healthcare and a leading global biopharmaceutical company. They have a revenue of US $40.1 billion, with more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission.

Job Scope:

• Under the supervision of the In-Process Technical (IPT) Automation Lead, the Automation Engineer is responsible for providing technical support for automation systems.
• Supports the Automation Lead and Senior Automation Engineer in investigations, finding resolutions to automation problems, and implementing Automation Change Control in compliance with SDLC, GMP, safety, and environmental regulations.
• Supports the IPT Automation Lead by providing expertise, technical knowledge, and advice to IPT/COEs (Centre of Excellence) on computerized/automation systems.
• Performs automation maintenance activities, including system backup, disaster recovery, and obsolescence management, to ensure automation systems remain in a validated state.
• Ensures timely resolution of identified automation issues and unplanned events through daily walk-throughs.
• Escalates ongoing automation issues to the Automation Lead in a timely manner.
• Reviews PMs being performed and looks for continuous improvement opportunities.
• Performs automation change controls under the guidance of the Automation Lead to ensure changes are raised and closed on time and meet the required quality standards.
• Prepares and performs Automation Installation Qualification (AIQ) / Automation Operational Qualification (AOQ), test plans, and documentation, ensuring that documentation meets regulatory standards.
• Develops Automation SOPs, job aids, and procedures.
• Develops and updates Automation training packages and conducts Automation training.
• Provides support for deviation and operation investigations requiring code and system-level troubleshooting.
• Supports a continuous improvement framework within Automation and the IPT, working with Leads to identify and implement improvements.

Requirements:

• Degree in any engineering, IT, or computer field.
• At least 1 year of experience in automation
• Familiar with knowledge of PLC and programming such as VBA or C++
• The candidate will be required to work on permanent night shift (9pm-6pm) to support the automation activities at the production site during night time

Reg No: R22104540

EA License no: 94C3609

Description

Under general supervision, manages multiple internal projects involving a single discipline or department.

Drives various components of project planning and execution on multiple projects such as completion of multiple detailed project specifications.

Leads project activities across functional groups. Ensures that project deliverables are properly completed and directly impacts cost containment, efficiency or profitability of operations.

Provides guidance and mentoring to more junior team members.

Requirement

Requires completion of an undergraduate degree in Science, Technology, Engineering and Math (STEM), and 4 years of related experience.

COMPANY DESCRIPTION

REC Group is an international pioneering solar energy company dedicated to empowering consumers with clean, affordable solar power through high-quality solar panels with a leading power density. As Solars Most Trusted, REC is known for its patented innovations and multiple award-winning products with reliable long-term performance. The cornerstone for RECs strong reliability is advanced and highly efficient manufacturing using Industry 4.0 practices. Founded in 1996 in Norway, REC has always been committed to a low carbon footprint in its solar materials and panels. REC is headquartered in Norway with operational headquarters in Singapore and regional hubs in North America, Europe, and Asia-Pacific. As of December 2021, REC is part of Reliance Industries Limited, Indias largest private sector company with revenues of USD 104.6 billion.

Find out more at recgroup.com

RESPONSIBILITIES

• Responsible for equipment benchmarking, technical strategies, and technical roadmaps at Solar Cell manufacturing tools.

• Provide technical expertise and recommend technical solutions to the development and design of equipment to maximize overall equipment effectivenLess.

• Harmonize and standardize manufacturing equipment and solutions across all sites worldwide.

• Strong coordination and communication network with both local and overseas manufacturing sites

• Partner with suppliers and subcontractors on new equipment projects, commissioning, Qualification, and installation, according to the planned schedule to add capacity on time

• Identifying and pursuing potential opportunities for hardware capability enhancement, and driving defect reduction.

• Relevant bachelors degree in Mechanical/ Electronic Engineering/ Automation Engineering and/or equivalent.

• More than 4 years experience in Equipment Engineering.

• A team player who can multitask and thrive in a dynamic and fast-paced environment.

• Good experience in problem-solving techniques, methodologies, and project management are a plus.

• Able to work in a clean room environment, gowning up in coveralls, hoods, boots, safety glasses, and gloves(PPEs). Spend significant amount of time on the factory floor working on the tools.

• Proficient in Microsoft (PowerPoint/ Excel/ Word) & AutoCAD applications.

• Oversea traveling may required.

About GlobalFoundries

GlobalFoundries is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world’s most inspired technology companies. With a global manufacturing footprint spanning three continents, GlobalFoundries makes possible the technologies and systems that transform industries and give customers the power to shape their markets. For more information, visit www.gf.com.

What You Will Do

• Support production line, SPC/FDC (statistical process control / fault detection classification) monitoring, perform process window study and provide improvement plan to improve process stability and performance.

• Lead Process CIP (continuous improvement projects) in Dept. to improve process robustness, cost and tool capacity thru –

• Develop and characterize new process recipes for new/existing technologies and NPI (New Product Introduction), meeting qualification and reliability requirements

• Improve process performance indices adopting big data analytic, statistical analysis and structured problem-solving methodologies

• Collaborate/work with cross functional teams, cross fabs and OEM suppliers for BKM (best known method) convergence on recipes, material, method, and I4.0 automation, and resolving complex integration issue

• Drive company's production ramp schedule by process qualification, productivity improvement and new tool release.

• Train, coach, and guide Engineers to support daily operational requirements and impart process knowledge, troubleshooting skills, risk assessment and decision making.

• Opportunities for job rotation and overseas assignment.

• Opportunities to file patents, author technical papers for publication and present at local or overseas seminars.

What You Will Need

• MS/BS in Chemical Engineering, Electrical/Electronic Engineering, Mechanical Engineering, Materials Science Engineering, Chemistry & Physics with minimum 3 years of relevant experience.

• Diploma candidates with minimum 5 years of work experience in similar role.

• Demonstrated ability in structured problem solving and root cause analysis with solution development.

• Strong knowledge in SPC (Statistical Process Control), risk assessment, DOE (Design of Experiment) and 8D approaches.

• Experience in big data analysis and use of AI/ML, coding like python.

• Strong technical depth and having patents and papers publication is a plus.

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations. 

To ensure that we maintain a safe and healthy workplace for our GlobalFoundries employees, please note that offered candidates who have applied for jobs in Singapore will have to be fully vaccinated prior to their targeted start date. For new hires, the appointment is contingent upon the provision of a copy of their COVID-19 vaccination document, subject to any written request for medical or religious accommodation. 

Interprets specifications, drawings, plans and checks all steelwork shop drawings done by the structural detailer if in accordance to client’s construction drawing prior to submission

• Organises and directs the delivery of construction materials and establishing detailed programs and schedule of site activities

• Checks the construction drawings if feasible for erection on site and work closely with the structural detailer for any proposal if needed

• Records and monitors design changes and assess their cost impact for the project’s contract sum and coordinate with the Contract Department

• Liaises with the client’s Technical Manager for all engineering and technical matters focusing structural discipline

• Responsible for coordinating with the Project Site Engineer for any site related technical issues

• Monitors the fabrication progress and coordinate closely to Production Department to meet the required schedule and report it to the client

Reporting to Plant Assistant Electrical & Instrument (E&I) Manager, this position is responsible for maintaining, troubleshooting and repairing E&I equipment for production plant, managing E&I contractors and ensuring all E&I maintenance activities are carried out efficiently and safely in compliance with local regulations and plant HSE requirements.

Responsibilities:

• Plan and schedule all maintenance works, including work and safety procedures, labour & equipment, spare parts and material requirements
• Ensure daily, periodical and shutdown maintenance works are carried out in safe, timely and efficient manner
• Carry out engineering studies of E&I works in modifications, revamping or upgrading of plant facilities to reduce plant trouble
• Carry out technical investigation of plant problems, evaluate findings and recommend countermeasures or propose new ideas to enhance reliability of E&I system and equipment
• Manage and maintain proper maintenance records & reports in accordance to industrial and regulatory requirements
• Manage and maintain proper stock level of spare parts inventory
• Provide training and guidance to junior engineers and contractors to maintain safe work record
• Ensure maintenance costs are controlled within budget
• Participate in internal and external audits

Requirements:

• Bachelor’s Degree in Electrical and/or Instrumentation Engineering with at least 3 of relevant experience in E&I maintenance or engineering
• Diploma holders with more years of experience will be considered
• Candidate with working experience in chemicals or petrochemical environment will be advantageous
• Knowledge in PLC or DCS preferred
• Self-driven, independent and resourceful
• Effective team player with good communication and presentation skills
• Possess good analytical thinking and problem solving skills
• Proficient in Microsoft Office applications
• Able to work overtime if required
• Willing to work in Jurong Island

· Prepare detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Participate in the coordination with other disciplines in preparation of design deliveries.

· Participate in preparing tender documentations.

· Participate in the successful delivery of projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· Conversant with local codes and authority submission procedures.

· Excellent interpersonal, good written and verbal communication skills.

· Have good knowledge of common engineering design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures).

· Strong analytical skills.

· Able to work under pressure with good time management skill.

Geotechnical:

- Experienced in the design of earth retaining and stabilizing structures, deep foundations, reclamations, slope stabilities.

- Familiar with the geotechnical impact assessment of structures and instrumentations.

- Familiar with the application of geotechnical FEM software.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

School of Mechanical & Aerospace Engineering (MAE) is seeking enthusiastic individuals with exceptional credentials to join a vibrant and dynamic research group undertaking fundamental research into eVTOL Technologies. The work is carried out at the eVTOL Research and Innovation Centre at Nanyang Technological University, Singapore. The environment provides excellent training in a highly motivated working environment with state-of-the-art facilities.

Key Responsibilities:

• Undertake Computer-Aided Design (CAD) and modelling of composite aircraft.
• Be responsible for structure design and mechanical installation design.
• Preparing presentations and reports for agencies and industrial partners.
• Supporting the team in research and lab developments.

Job Requirements:

• Beng / MEng in Engineering from a recognized university and excels in the area of Aerospace, or Mechanical Engineering or equivalent.
• The position requires high creativity and research capability.
• At least 3 years of professional work experience in CAD modelling is required (must show examples from work portfolio).
• Experience in composite structure design is preferred.
• Good team player, enthusiastic and good English skills.
• Able to perform multi-task, work under pressure and meet deadlines.
• Having industrial experience would be required.

We regret that only shortlisted candidates will be notified.

COMPANY DESCRIPTION

REC Group is an international pioneering solar energy company dedicated to empowering consumers with clean, affordable solar power through high-quality solar panels with a leading power density. As Solars Most Trusted, REC is known for its patented innovations and multiple award-winning products with reliable long-term performance. The cornerstone for RECs strong reliability is advanced and highly efficient manufacturing using Industry 4.0 practices. Founded in 1996 in Norway, REC has always been committed to a low carbon footprint in its solar materials and panels. REC is headquartered in Norway with operational headquarters in Singapore and regional hubs in North America, Europe, and Asia-Pacific. As of December 2021, REC is part of Reliance Industries Limited, Indias largest private sector company with revenues of USD 104.6 billion.

Find out more at recgroup.com

RESPONSIBILITIES

• Drive customer issue resolution activities following the claims management process, i.e. root cause analysis, containment, corrective action, and factory process / quality controls improvements to prevent recurrence of problems and efficacies of detection.
• Process field claims in a timely manner for resolution.
• Work with regional Technical Product Managers to resolve field claims. This includes performing failure analysis and field visits to customer sites/installation.
• Providing timely engineering insights including failure analysis technical reports and presentation.
• Analyze product warranty claim and provide modeling on product service life.
• Collaborate with cross functional teams, contributing to the domain of product FA or characterization.
• Handles customer visits and factory audits and product inspection.
• Develop & contribute to building knowledge base of degradation from product to material level.
• Design tests to detect infant mortality and mid-life product failures.
• Perform investigation including product reliability data analysis, and modeling product performance behavior to identify opportunities in future development or continuous improvements for current technology.

• Bach / Masters / Phd Degree in Engineering or Science (Electrical, Mechanical, Physical Sciences)

REQUIRED SKILLS

• Problem-solving, failure analysis and trouble-shooting, statistical data analysis and design of experiment
• Application experience in managing (large) data modelling would be favorable
• Excellent practical knowledge and use of Microsoft Office
• Excellent interpersonal skills, strong belief in driving for quality and customer satisfaction.
• Ability to interface and communicate effectively with cross-functional teams as well as external stake holders and external auditors.
• Communicate effectively through presentation and technical reports.
• Enjoys rigors of technical reviews with peers & management to drive to business outcome.

Description

Acts as a project lead by establishing development plans and preparing for design reviews.

Guides others on engineering tools, test specifications and assesses application of Health, Safety, and Environment techniques during the design process.

Applies and interprets engineering calculations to obtain design solutions and troubleshoot erroneous results. Defines input requirements and develops functional specifications by utilizing basic statistical methods and reliability techniques. Contributes to Halliburton’s Intellectual Property portfolio by delivering innovative and commercially successful solutions.

Creates an impactful relationship with Halliburton’s technical community, customers, and vendors by proactively collaborating with key stakeholders. Participates in professional societies in area of specialization.

Skills acquired through the completion of a degree in Mechanical Engineering or similar discipline.

Requirement

Minimum educational requirement of a doctoral degree and zero years’ experience or a master’s degree and two or more years’ related experience or a bachelor’s degree and four or more years’ related experience.