Total 1,894 construction engineer job vacancies in Art / Design / Entertainment category in Singapore

Job Responsibilities

• Leading a Team of Mechanical Design Engineers to execute the Mechanical Design Engineering of the Project which includes preparation of RFQ, Specifications, Mechanical Data Sheet for
• Centrifugal Pumps, PD Pumps, Submersible pumps, Marine Loading Arm, Oil / Water Separator,
• Gangway, Jib Crane, Fire Fighting Equipment, Mixers, Gas Dehydration Package, Air
• Compressor and Dryer Package, Nitrogen Generation Package, Chemical Injection Package,
• Process Filters, Vessels etc. meeting Process Requirement, Client Specifications, Project
• Requirements and all applicable Project Documents to enable Vendors to accurately bid for the supply of Equipment.
• Review & Checking of Mechanical Documents such as RFQ, Specifications, Mechanical DataSheet and Technical Bid Evaluation for Mechanical Equipment to ensure compliance to applicable Codes & Standards and Project Requirements
• Review of Vendor Quotation, Evaluation & Preparation of Technical Bid Evaluation for
• Mechanical Equipment
• Interface Management with Lead Engineers, Client, Contractors, Vendors, Government Agencies and Certification agencies
• Preparation, Monitoring and Control Engineering Document Control List and expedite for delay/approvals / resolution of open issues
• Review and Ensures that all works are carried out in accordance with project specification.
• Maintain Design integrity and quality within the Project Engineering Team
• Preparing Engineering schedule and Engineering man hours estimation to meet project requirements.
• Supporting Procurement Team for purchase of Mechanical Equipment
• Review of Vendor Documents post order of all the Mechanical Equipment to ensure compliance to RFQ and other Discipline requirements.
• Co-ordination with construction and commissioning team in resolving site issues.
• Vendor Co-ordination & Procurement Assistance
• Preparation and Compliance for Engineering Audit Requirements.
• Job assignments, Mentoring and Supervision of works for Designers and Design Engineers.
• Technical assistance to construction activities and attending to Site Queries.
• Participates in discipline and inter-discipline design check and screening meetings for
• compatibility, completeness and correctness in works
• FEED & Pre-Bid works which involves Feasibility study & MTO estimation works.
• Participate in Bid Clarification Meeting, Kick Off Meeting, Pre-inspection Meeting, Factory Acceptance Test, Site Acceptance Test etc.
• Vendor Shop visit for Work Progress
• Support Construction Team and Commissioning Team for the successful installation and commissioning of the Mechanical Equipment
• To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.
• To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.
• Any other ad hoc tasks

Requirements

• Preferably Bachelor’s / Master’s Degree in Mechanical Engineering
• Preferably 10 - 15 years of experiences in Oil and Gas industry Software Requirements
• Good proficiency in MS Excel, MS word, MS Power Point

Code Knowledge

• API 610, API 676, API 682
• ASME Section VIII
• NFPA 20, NFPA 10, NFPA 16
• OCIMF

Job scope:

-Propose ideas on interior designs and space planning

-Produce interior design drawings, 3D drawings & quotations

-Work closely with client, contractors & suppliers to ensure quality project completion & timeline set are met

-Involve in site measurement, layout plan & selection of materials

-Other tasks as assigned by company's director

Requirements:

-Specialised in interior design or equivalent

-Able to communicate & write in both English & Mandarin

-Knowledge in Autocad, sketchup, 3D max, Vray, photoshop, excel

-Responsible, committed and have a good working attitude

-Able to work independently and be a team player at the same time

-Able to start work at short notice

-Individuals with or without experience are welcome to apply, training will be provided

Program Engineer

Basic Salary: $3800 - $4800

Basic + Allowance + OT

Location: Near Joo Koon MRT

5 days work week

8.30am-5.30pm

A Leading Manufacturer of Precision Plastic Components company in Singapore in search of Program Engineer Talent!

Job Description

Provide support in BD activities, execution and transfer of new programs to designated operation sites; Ensure successful program to meet internal/external customer goals and quoted standards.

Responsibilities:

• Lead and direct cross-functional team in program execution

• Ensure proper qualification of new projects and successful implementation of programs in the production/manufacturing unit

• Track and monitor project progress to ensure project schedules and cost objectives are met

• Actively follow on sales leads and take lead in business development

• Serve as primary technical contact with customers on strategic or politically sensitive issues

• Generating quotation for molding projects involving new toolings

• Work with Manufacturing on developing and establishing workflows and production concepts (to optimize production efficiency &meet customers’ requirements)

• Identify and specify engineering requirements for new projects

• Initiate equipment procurement activities for new projects when needed (with Purchasing)

• Plan and execute tooling qualification activities with supporting groups to achieve successful project execution

• Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

Requirements:

• Degree in Mechanical Engineering

• 3 years of relevant experience in Manufacturing

• Good knowledge of project management & production process

• IT Skills (MS Office)

• Independent, good initiative and able to multi-task in fast paced environment

Role Summary/Purpose

The Lead Engineer is the technical guarantor ofthe proper performance of design works conducted in his/her field of activity, in matter of committed design budget (man days), deadline and Quality, in line with Customer expectation, while promoting ease of installation, operationand maintenance ofthe system.

He/she plans basic and detailed design activities, manages & oversees detailed executionprogress, coordinates delivery of required engineering documentation forprocurement,manufacturing and site erection associated to concerned activity, based on Customerspecifications and requirement, and internal standards. He/she coordinates elaboration of documents done internally or through subcontracting.

Essential Responsibilities

• Establish, based on tender and contract analysis, and project strategy, the list of documents to produce for his/her field of activity
• Evaluates with PEM or PM engineering workload and deliverables datesfor concernedpackage, and commitsto such budget in man days and in time delivery
• Ensures on-time delivery of design, including Partner documents, to stakeholders withsuitable quality
• Anticipate and mitigate delivery issues and recommend changes.
• Lead & coordinate his/her design team.
• Manage and monitor detailed execution progress and short-term plan.
• Request from PEM or PM required technical coordination meetings with partner or key suppliers if when appropriate to synchronize respective designs.
• Measure design physical progress on relevant studies and provides PEMwith relevant data for evaluation of ETTC.
• Informs PEM / PM of design issues all along project execution and propose range ofsolutionsfor decision; follow solutions agreed up to resolution
• Updates risk assessment related to engineering &applies mitigation plan when required.
• Pro-actively generate and manage opportunities.
• Analyse and ensures compliance to customer technicalrequirements.
• Support Sourcing and Procurement in the definition of the Supplier’s list according to the project Strategy
• Manage technical interface with sub suppliers & partners, prepare input data , check consistency.

Qualifications/Requirements

• Engineering Degree(HV electricalfunction of field of activity involved)
• > 10 years engineering experience in the related activity/discipline, preferably in project & EPC type environment in T&D system, Power Gen, Renewable projects (Wind Form, Solar) in position of Lead Engineer
• Knowledge of Project organisation and engineering processes related to his/herscope of activity. 
• Experience of project technical management processes, preferably in a multi-disciplinary team’s context with multiple interfaces 
• Several experiences inmanaging externally subcontracted design work package of varioussizes. 
• English working knowledge 
• Experience in technical problem solving. 
• Willingness to work in various locations forshort or medium period and to travel worldwide.
• AutoCAD user 
• DIgSILENT – Power factory and PSSE
• Knowledge of HV primary design for both AIS-substation and GIS substation Including:
• Single Line Diagram 
• HV equipment sizing calculation and selection.
• Substation and equipment layout/Section
• Grounding system calculation and installation documents
• Lightning system calculation and installation documents
• Power cable system 
• LV cable system 
• Interface register with third parties. 
• System study including:
• Load flow
• Short circuit
• Dynamic study
• Harmonic study
• Insulation coordination study
• RAM study o FMECA study

• Ensure efficient Civil & Structural and Geotechnical & viaduct design is achieved in accordance with Design Criteria and relevant standards
• Liaise with internal and external parties on all civil & structural and geotechnical & viaduct design matters and advises the Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/Project Manager (PM) regularly
• Co-ordinate the review of Contractor's civil & structural and Geotechnical & Viaduct submission and assists the SPM/PM in conveying a timely response to the contractor
• Identify and resolve potential design related issues during construction phase
• Carry out any other duties as required by the Authority's Project management team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical meetings and to provide technical support as required in the evaluations of Contractor's claims
• Ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Requirements

• Minimum Degree in Civil/Structural Engineering or equivalent
• Candidates with contractor's (main/sub) experience are welcome to apply.

Begin your engineering career by enrolling into our 26-month structured Career Advancement Programme (CAP). This programme sets you on the pathway to become a Accredited BIM Professional for Digital Delivery Management. Your time on our programme counts towards the work experience requirement.

Digital skills are crucial in the Built Environment sector. BIM is the way to digitally create and simulate building and infrastructure models before the actual construction.

AcePLP welcomes fresh graduates and mid-careerists from Architectural, Mechanical, Electrical, Civil, BIM, Mechatronics and Engineering with diploma/degree to enrol in our CAP.

AcePLP’s 26-months CAP aligns you to the Built Environment career trajectory. It is the most established work-study programme in Singapore with 20-years proven track record of producing thousands of engineering professionals in the Built Environment. CAP Alumni have made valuable contributions in the development and management of digital models for buildings and infrastructure.

You will have opportunities to learn on-the-job alongside industry experts and build your expertise after an initial 2-months classroom training with us.

Why Join Us?

We have the most established Work-Study Programme in the Built Environment sector with over 20 years track record.

• An intensive free two-month technical BIM and CAD training will be provided.
• Learn on-the-job as you work across building and infrastructure projects in Singapore with guidance from our experienced Trainers and Resource Managers.
• Build your expertise and widen your professional network with us through our large database of clients, project assignments and alumnus.
• This program counts towards the fulfilment of pre-requisite for the SUSS Bachelor of Building and Project Management and NUS Bachelor of Technology in Engineering, as well as towards the Digital Delivery Management (BIM) accreditation.
• Sponsorship from AcePLP for further studies are available subject to terms and conditions apply.
• Obtain accreditation for your DDM/BIM skills and Specialist BIM Diploma and/or building related Degree after 6 years in the building industry.

Am I an Eligible Candidate?

• Entry level candidates and mid-careerists may apply.
• Strong interest in pursuing a career in the Built Environment Sector.
• Degree/Diploma in Built Environment-related fields: Architecture, Mechanical, Electrical, Civil, Structural Engineering, Green Building & Sustainability, Project or Construction Management and Facilities Management.
• Other qualifications considered: Any engineering subjects, Intelligent Building Technology, Graphic Arts, Visual/Product/Interior Design, Landscape Architecture, Environmental Engineering, Mechatronic, Aeronautical, etc.
• Professionals with prior experience in BIM may request for a skills test to fast-track their development at AcePLP

You can apply here: https://aces.aceplp.com.sg/apply/nt/

Julian Grey's client is an established provider in the eastern region of Singapore, specializes in offering manufacturing and engineering solutions for factory and industrial automation. Their expertise spans a broad array of services, including custom processing equipment design and production, as well as optimization of manufacturing processes. With a comprehensive range of manufacturing products and cutting-edge technology at their disposal, they excel at delivering all-encompassing turnkey solutions to their semiconductor multinational corporation clients listed on stock exchanges, ensuring top-tier service quality.

Work location: East
Work hours: Monday - Friday, 9am - 6pm

Job Responsibilities

• Establish and improve process condition and technology
• Upgrade process capability and reduce production cost
• Establish and modify process management projects
• Set up process parameters for various semiconductor equipment for Implant module
• Evaluate, promote and plan new equipment or materials
• Abnormal analysis and improvement

Requirements

• Minimum education qualification in Engineering or relevant field
• Minimum 2 - 3 years repair/troubleshooting experience with Implant equipment
• Experience in semiconductor front-end wafer processing equipment

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants

Please WA Bryan @ 97559161

Shortlisted candidates will be notified

Bryan Tay
Reg No. R23112463
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Responsibilities

• Provide a new platform solution for power supply and power system goods while adhering to safety regulations, XP standard design practice, and deadlines to fulfill product specifications. You can also upgrade and alter current designs to make products more affordable or perform better.
• To conduct experiments and tests as necessary in order to validate or support the design and provide a written report. For the investigation of previous product failures as well as the design of future products Disassembling and organizing all replacement parts for damages or repairs.
• Identify the important road or paths and give guidance to reduce risk by leading the project planning process.
• Conduct product validation and verification tests, including as DVT, electrical performance, thermal, and EMC tests, to make sure the product satisfies specifications before delivering it to an internal or external customer.
• Examines product designs to make sure they adhere to agency regulations, company policies, safety standards, and engineering principles.

Requirements

• A minimum of 12–13 years of stable experience in power supply solutions companies, together with some degree of people management expertise, is required.
• Minimum Diploma in Electrical/Electronic Engineering
• Thorough understanding of the essential SiC, GaN, and magnetic components for SMPS circuit topologies.

For interested applicants, kindly send your resume in Word/PDF format including the following:

1. Current Salary

2. Expected Salary

3. Availability

4. Reason for leaving

Thank you for your application and we regret that only shortlisted applicants will be notified.

By submitting any application or resume to us, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Job Purpose

Perform automation engineering work and lead design teams in both local and international projects with varying degrees of complexity and total installed cost and deliver the project scope to the agreed quality, cost and schedule.

Responsibilities and Authority

• Perform design tasks according to the agreed quality, scope, time and safety in our investment projects.
• across all project phases from idea creation, pre-study and feasibility study via basic engineering to detailed engineering and As Built phase. In addition, participate in pre-commissioning, commissioning and start-up phases.
• Develop, implement and apply NES defined design engineering work methods and tools systematically.
• Solve problems proactively together with site operations and other refinery disciplines / site SPAs.
• Manage own performance, and the performance of the work share partners, provide necessary inputs and guidance as a design specialist of own instrumentation engineering.
• Develop oneself in automation technical competence and leading design work and workshare partners, or towards becoming a design specialist of own engineering discipline. Develop oneself in functional safety and instrumentation engineering.
• Collaborate and network with other design disciplines, workshare partners, suppliers and customers.
• Develop your own network of professionals outside the company and proactively use such networks to further the interests of the company.
• Take part in developing our instructions and way of working.

Primary responsibilities for this role at investment project level are (but not limited to) the following

• Lead the design team for automation through all phases of the project when appointed as the project lead especially for complex and high TIC projects, or projects of strategic importance to the business.
• Perform automation engineering independently according to relevant local and international codes in an international environment and prepare or check or approve automation deliverables such as control
• philosophy, control and interlock description, cause and effect diagram, control diagram, logic diagram, sequence diagram, alarm management, automation vendor related deliverables, job definitions etc.
• Participate and contribute in reviews such as BoD review, P&ID reviews, HAZID / HAZOP sessions, constructability reviews, risk workshops, value engineering workshops
• Participate and contribute to project sessions such as schedule reviews, PEP reviews etc.
• Lead the design team for automation through all phases of the project when appointed as the project lead
• Conduct site surveys as necessary to gather the relevant information for brownfield project scope. Plan and facilitate necessary studies and carry out investigations needed in a project
• Provide technical support to other engineering disciplines such as engineering & vendor document reviews
• Plan and manage the resource allocation for the projects for which you are the lead together with the resource managers
• Manage the performance of own team members including those of external partners if assigned to the project. Plan the workload and resource allocations for all team members through all project phases
• Prepare manhour estimates and support project planning as required
• Work with the PM / EM in developing the project baseline (cost, schedule and execution plan) provide comments to the baseline documents as required
• Establish proper controls and monitor progress to ensure project execution is in line with the baseline
• Ensure that project deliverables for each phase are prepared in a timely manner
• Prepare purchase requisitions, perform technical evaluations and participate in contract negotiations with suppliers and contractors
• Perform technical expediting related to our deliveries
• Provide engineering support in resolving site queries and site issues
• Participate as automation construction supervisor for automation works at site during turnarounds and shutdowns. Conduct field supervision to supervise the works being carried out by the construction
• contractors through Quality Checks (QC). Perform SAT on automation systems per project scope
• Participate in mechanical completion walk downs and Pre-startup safety reviews, Post startup reviews, lessons learnt sessions, project closeout

Knowledge, Skills and Experience

• Bachelor's or Master's engineering degree in instrumentation, or similar
• Proven experience of at least 15 years on a similar job, with 5 years in a lead role, preferably also inside the fence of industrial clients
• Strong focus on project delivery skills, developing new ways of working and driving change are close to your heart
• Ability to recognize opportunities and respond to client needs, network easily with a variety of stakeholders
• Strong leadership skills, hands-on mentality and desire to further develop in your role and grow with the team.
• Knowledge and experience of ExSilentia software.

Responsibilities

• Responsible for development of new products and product improvements
• Responsible in performing the whole cycle of product design
• Responsible for designing and devleoping of quality product and ensuring manufacturability with other engineering functions involved in product development.
• Responsible in ensuring product designs are validated per customer requirements, respecting international industry standards

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in Product Design Development
• Proficient with Pro-Engineer/ CREO/ANSYS/ Autocad

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Jane Neo

Registration Number: R1328870

EA License No. 22C1026

• Reports to Design Manager
• Develop CAD drawings and coordinating of design drawings with the Client / Consultants to comply with requirement of the authorities
• Reviewing project specification, technical clarification and construction drawings
• Assisting for liaison with the Client / Consultants to obtain clearance for the construction works
• Shop drawings submission to client/consultant for approval
• Overseeing and assisting the design review process to include maintaining accurate and timely design review databases
• Assisting progress report for Architectural works
• Assisting design manager with the Architect, Structural design team and M&E design team to resolve discrepancies issue and technical issues
• Other duties as assigned

Job Requirements:

• Diploma or Degree in Architectural / Structural Engineering
• Minimum 5 years of similar experience in building projects for main contractor firms
• Proficient in MS Office, CAD, BIM, Revit
• Good organizational, interpersonal and communication skills
• Technical skills and the ability to use design software
• Location: Central (Beach Road)
• Project: Commercial Building

Responsibilities:

• Monitor Soil Investigation to get correct geotechnical design inputs for design.
• Foundation recommendation report preparation including backup calculation (In all types of soils & rock)
• Pile capacity calculations in various soils/rocks. Test pile location plan/ Pile reinforcement calculations & drawing preparation. Validation of pile capacity by Pile load test (Vertical / Lateral / Pull out).
• Piled Raft design using the latest design tools and theories.
• Design using PLAXIS 2D Software (Sheet pile with structure waler /Diaphragm wall-structure/contiguous pile with soil/rock anchor)
• Design of all components like Anchor capacity, water & structure design, modeling top-down method of construction.
• Dewatering system design. (Wellpoint, Drawdown calculations, Open dewatering).
• Seepage control techniques like Jet -Grouting, slurry wall & flow net calculations.
• Soil improvement using stone column
• Design of stone columns, settlement calculations & Liquefaction calculations.
• Swelling soil management techniques.
• Back Fill material specifications & various compaction techniques used for different backfill materials.
• Slope stability calculations and analysis

Requirements:

• Bachelor’s Degree/Diploma in Civil Engineering
• Min 5 years of relevant design experience in Geotechnical design
• Hands-on experience using analysis & design tools like PLAXIS 2D/3D, SLOPE/W, A-PILE & L-PILE is required.
• Knowledge of STAAD Pro, SAFE, ETABS will be an added advantage.
• Ability to work independently as well as in a team.
• Ability to manage tasks as per priorities.
• Good verbal and written communication skills

For a confidential discussion please send your cv to [email protected]

To view more roles within the Construction & Engineering | Project Management Sector please visit our LinkedIn page @ Artemis Executive Solutions or https://www.careers-page.com/artemisexecutivesolutions We thank you for taking the time to apply but due to the high volume of applicants, we regret to inform you that only shortlisted applicants will be contacted.

EA Lic. No. 23C1598 | R1330228

Join our team of Design Engineer for a rewarding career in designing our product for some of the world’s most advanced semiconductor customers. This position requires the incumbent to support all phases of design project according to the product test specifications. Working with the team, the Design Engineer will gain knowledge of the latest technology and the opportunity to work on newly developed products.

He/ She possesses mastery of design fundamentals and technical skills to execute design concepts required for EQT product. He/ She is able to work on multiple projects concurrently and deliver on expectations within tight deadlines. He/ She provides engineering support in resolving production challenges including quality, on-time delivery and technical challenges to achieve total customer satisfaction.

Responsibilities

• Perform 3D Modelling / 2D Drafting / Thermal & Flow Stimulation using computer-aided design software (Solidworks, 3D CAD tools, etc.).
• Understand the project and task scope assigned and work accordingly to complete the project within the deadline.
• Must ensure that the final designed product quality and deliverables meet the required specifications and standards.
• Monitor and achieve departmental and individual Key Performance Indicators (KPIs) targets related to project delivery, quality, and productivity.
• Collaborate with Assistant Manager/ Staff Engineer/ Senior Engineer to ensure daily engineering tasks are well-controlled, monitored, and on track.

Requirements

• Studies in any Engineering Discipline (Mechanical, Mechatronic, E&E, Precision Engineering)
• Min 1 - 3 years of Product Design competence, good troubleshooting capability.
• Proficient in Solidworks, GD&T or any 3D CAD Tools. Knowledge of Flow & Thermal Simulation is an added advantage.
• Well versed in Microsoft Office. Knowledge of GSS & PDM system is advantageous.
• Possess knowledge in semiconductor testing environment.
• A positive learner, meticulous worker and a team player.

Job Highlights:

• Monday – Friday: 8.30am to 5.30pm
• Walking distance from Ubi MRT station

Duties & Responsibilities:

RF/Analog/PMIC/Clock management/Mixed Signal Circuit Design, such as PA/LNA/Mixer/VCO/Filter/VGA/LDO/Buck/ADC/DAC/PLL, develop and testing of connectivity IC for short range RF wireless applications such as Bluetooh, WLAN, Zigbee, NFC, GNSS etc.

Skills/Experience:

· PhD in Microelectronics/Digital Communication/EE

· RFIC design experience in RF/Analog/Mixed signal circuits using CMOS/SiGe/GaAs process

· Both junior and senior position are opened for application

· Have knowledge in RF/Analog design and verification flow using CAD simulation and verification tools from Cadence, Keysight (Formerly Agilent) and Mentor Graphics etc

· Hands-on experience in the design of RF/Analog/Mix signal blocks such as (but not limited to) PA/LNA/Mixer/VCO/Filter/VGA/PLL/ADDA, PMU etc

· In depth knowledge and design experience in mixed-signal systems and circuit design/verification of PLL/frequency synthesizer will be a plus

· Good knowledge in RF/Analog evaluation flow and operation of test equipment to evaluate RFIC performance

· Some experience in script writing such as pearl, skill, matlab etc will be advantageous

· Highly motivated, able to work independently and demonstrates strong analytical and communication skills

· Good interpersonal and creative skills with the ability to multitask in a demanding and fast paced environment

• Perform design for manufacturability in all new projects.
• Provide PCB manufacturing technical advice to customers on their new projects.
• Perform feasibility studies and reviews for all new data received from customers.
• Adhoc duties as assigned.

Requirements:

• Degree/Diploma in Electrical & Electronics Engineering in Printed Wiring Board manufacturing environment
• Good communication, report writing and presentation skills
• Good analytical skill with ability to work independently
• Ability to communicate with all levels of staffs
• Entry level are welcome to apply as training will be provided.

Electronics MFG Industry

Loyang Area (Tpt pick up at designated area)

Interested applicants, please forward a detailed resume to [email protected]

Tempserv Pte Ltd
License No: 06C3745
Attention: Audris Teo / EA Personnel No: R1102063

Wireless Communication – FPGA Design Engineer

The candidate should be a dynamic and self-motivated individual that has a strong interest in advanced communications systems for use in land, maritime, defense, satellite and space applications. The candidate will work on projects which are exciting, demanding, rewarding and have opportunities to learn and grow on the job.

Responsibilities

· Design and develop signal processing algorithms for wireless communication systems and acquire mastery of relevant tools

· Conduct simulations on end-to-end system with various RF impairments and channel fading conditions

· System integration, prototype bring-up, performance characterization and optimization

· Physical layer validation, field testing, debugging and troubleshooting

Requirements

· Bachelor in Electrical Engineering, Computer Science or similar field of studies with relevance to Infocommunication

· Good understanding of wireless communications system, signal processing techniques or RF system

· Experience in simulation tools, programming and scripting languages (MATLAB, VHDL, Verilog, C/C++, Python, Ruby) is a plus

· Good analytical and problem-solving skills

· Excellent written and verbal communications skills

· Thorough, disciplined, methodical, and good documentation habits

· Able to work independently as well as within a multi-cultural team spread

· Fresh graduates with an interest in this field are welcome to apply.

Job Description

• Industry/ Organization Type: Manufacturing/Semiconductor Technology
• Position Title: Senior Design Engineer
• Working Location: Kallang
• Working Hours: Monday – Friday, 9 am – 6 pm
• Salary Package: Up to $7,000 + VB
• Duration: Permanent

Key Responsibilities

• Define requirements and features for semiconductor equipment
• Develop concepts and architecture of new equipment
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps and valves.
• Produce detailed engineering drawings
• Perform design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements
• Improve design of legacy machines
• Application of analysis tools like Fish Bone Diagram, FMEA etc.

APPLY NOW!!!

• Degree in Mechanical or Mechatronics Engineering with more than 5 years of experience in semiconductor equipment design
• Good knowledge and experience in the following areas:

1.Design of automation or semiconductor equipment

2.High precision machine design

3.Design of High-Speed Pick and Place mechanisms

• Familiar with 3D CAD software
• Ability to plan, prioritize, and coordinate throughout the project cycle.
• Ability to work independently with high level of motivation and communicate with all levels.
• Equipment troubleshooting skills.
• Ability to produce detailed Mechanical drawings and apply knowledge of Geometric Dimensioning & Tolerancing.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65782 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Assistant Engineer

$2500 – $2800

5-day work week. Mondays to Fridays: 8:30am to 6pm

Office: Pandan Road Singapore 609259

Transport: We have company bus departing near Clementi MRT station at 8.10am to bring staff to our office and a return company bus trip back to Clementi in the evening.

Job scope:

• Produce 2D engineering drawings using AutoCAD for fabrication and submission to client
• Produce 3D drawings for presentations
• Purchasing of materials
• Coordinate, schedule and supervise work assignments together with workshop supervisor
• Answer queries from salesperson and to provide quotations
• Supervise and conduct load test for the assigned equipment
• Prepare cost estimation
• Liaising with sub-contractors and suppliers and inter-department personnel
• Submission of final costing to Finance Department
• Control & record assets movement
• Update asset master list
• Dispose / transfer of asset
• Prepare & maintain documentation
• Assist in audit

Requirements:

• Diploma in Engineering or equivalent
• Working knowledge of 2D AutoCAD or 3D solidworks is an added advantage
• Proficient in MS Office

Cheah Khai Yeen (Catherine) Reg No : R1986405.

The Supreme HR Advisory Pte Ltd EA no: 14C7279

Job Description

• Industry/ Organization Type: Manufacturing/Electronic Components and Boards
• Position Title: Automation Design Engineer (Based at Bintan)
• Working Location: Bintan
• Working Hours: Mon – Fri (8 am – 5 pm)
• Salary: Basic up to $4500 + Overseas Allowance + Variable Bonus (Expat Package)
• Duration: Permanent

Key Responsibilities

• Design and develop innovative automated machines to meet specific manufacturing requirements.
• Plan and execute automation and equipment systems design to optimize machine efficiency and reliability.
• Explore and implement strategies to enhance machine performance, particularly in cycle time and production output.

APPLY NOW!!!

• Degree in Mechanical Engineering or its equivalent.
• Preferably more than 2 years of experience in machine design and development within the Electronics industry.
• Experience in managing turn-key projects.
• Excellent working knowledge in Solidworks application.
• Demonstrated creativity in machine design.
• Strong team player who is self-driven and results-oriented.
• Willing to be posted to Bintan, Indonesia.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65867 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781