Total 590 service engineer job vacancies in Education / Training category in Singapore

The Earth Observatory of Singapore (EOS) is a research institute at the Nanyang Technological University (NTU) of Singapore. Its mission is to conduct fundamental research on earthquakes, volcanic eruptions, tsunami and climate change in and around Southeast Asia, toward safer and more sustainable societies. The Centre for Geohazard Observations (CGO) of EOS provides technical and research support to the observatory. It installs, maintain and manages the observatory’s geophysical and other field instrumentation stations spread over several countries in the region.

The Senior Research Engineer is to enable the research conducted by EOS by providing effective technical and technological solutions in installing, maintaining and managing the various geohazard observation stations, and conducting field surveys. The purpose is to measure and collect quality field data necessary for the tectonic, volcanic and climate related research of the observatory.

Key Responsibilities:

• Design, install and maintain geohazard observation stations and networks in and round Southeast Asia that collect geophysical, geodetic and geochemical data for research. The stations include but not limited to Global Navigation Satellite System (GNSS) station, seismic station, volcano observation stations, infrasound network and environmental observation station.
• Design, install and maintain technical systems, such as the power system, radio/telemetry system, data networking system, fault monitoring system for the geohazard observation stations.
• Plan, organise, conduct local and overseas fieldwork for the installation, maintenance and rectification of the geohazard observation stations.
• Plan, organise and conduct geophysical field measurements using modern surveying equipment.
• Monitor the operational status of the geohazard observation stations remotely, devise fault rectification plan and rectify remotely where possible.
• Coordinate with collaborators for the conduct of installation and maintenance fieldwork.
• Perform data quality check and basic data processing.

Job Requirements:

• Bachelor’s degree in engineering or related fields with 8 years of relevant working experience, or
• Master’s degree in engineering or related fields with 6 years of relevant working experience.
• Experience and knowledge in GNSS data processing using GAMIT/GLOBK or similar software.
• Experience and knowledge in computing languages such Python and bash scripting.
• Experience and knowledge in Data Networking/Telemetry.
• Experience and knowledge in the electrical domain.
• Experience in conducting fieldwork at remote locations.
• Evidence of being a strong team player.
• Evidence of technical or technological resourcefulness and inventiveness.
• Experience in earth, climate or environmental science related fieldwork in Southeast Asia region is an advantage.

We regret to inform that only shortlisted candidates will be notified.

The Earth Observatory of Singapore (EOS) is a research institute at the Nanyang Technological University (NTU) of Singapore. Its mission is to conduct fundamental research on earthquakes, volcanic eruptions, tsunami and climate change in and around Southeast Asia, toward safer and more sustainable societies. The Centre for Geohazard Observations (CGO) of EOS provides technical and research support to the observatory. It installs, maintain and manages the observatory’s geophysical and other field instrumentation stations spread over several countries in the region.

The Research Engineer is to enable the research conducted by EOS by providing effective technical and technological solutions in installing, maintaining and managing the various geohazard observation stations, and conducting field surveys. The purpose is to measure and collect quality field data necessary for the tectonic, volcanic and climate related research of the observatory.

Key Responsibilities:

• Design, install and maintain geohazard observation stations and networks in and round Southeast Asia that collect geophysical, geodetic and geochemical data for research. The stations include but not limited to Global Navigation Satellite System (GNSS) station, seismic station, volcano observation stations, infrasound network and environmental observation station.
• Design, install and maintain technical systems, such as the power system, radio/telemetry system, data networking system for the geohazard observation stations.
• Plan, organise, conduct local and overseas fieldwork for the installation, maintenance and rectification of the geohazard observation stations.
• Plan, organise and conduct geophysical field measurements using modern surveying equipment.
• Monitor the operational status of the geohazard observation stations remotely.
• Coordinate with collaborators for the conduct of installation and maintenance fieldwork.
• Perform data quality check and basic data processing.

Job Requirements:

• Bachelor’s degree in engineering or related fields with relevant working experience, or
• Master’s degree in engineering or related fields.
• Experience and knowledge in GNSS data processing using GAMIT/GLOBK or similar software.
• Experience and knowledge in computing languages such Python and bash scripting.
• Experience and knowledge in data networking/telemetry and electrical domain.
• Experience and knowledge in operating survey equipment such RTK GNSS instrument, LiDAR scanner, total station, level instrument or similar.
• Evidence of being a strong team player.
• Evidence of technical or technological resourcefulness and inventiveness.
• Experience and knowledge in LiDAR data processing using LiDAR Mapping Suite, POSPac, CloudCompare or similar software will be an advantage.
• Experience in earth, climate or environmental science related fieldwork in Southeast Asia region is an advantage.

We regret to inform that only shortlisted candidates will be notified.

• Be part of a leader of electrical and automation organization.
• Be exposed to cutting-edge technologies and solutions.

About Our Client

The company specializes in electrical equipment, automation systems, and cutting-edge home solutions. The company epitomizes innovation and quality, offering a diverse range of products and solutions to meet the evolving needs of customers across residential, commercial, and industrial sectors. From stylish switches and sockets to sophisticated home and building automation systems, the company delivers state-of-the-art solutions backed by technical expertise and a commitment to customer satisfaction. As a key player in the region's electrical infrastructure development, the company continues to set industry standards, driving progress and innovation across the Asia-Pacific landscape.

Job Description

Key Responsibilities:

• Provide pre-sales and post-sales technical support to customers and partners, including system design, product selection, installation guidance, troubleshooting, and training.
• Develop a deep understanding of the product portfolio, including switches, sockets, home automation systems, and building automation solutions, and stay updated on new product releases and industry trends.
• Collaborate with sales teams to engage with customers and partners, understand their technical requirements, and propose tailored solutions to meet their needs.
• Support project implementation by providing technical expertise, conducting site visits, coordinating with internal and external stakeholders, and ensuring successful project execution.
• Conduct technical training sessions, workshops, and seminars for customers, partners, and internal teams to enhance their understanding of the products and solutions.
• Prepare technical documentation, including specifications, user manuals, and technical bulletins. Maintain accurate records of customer interactions, inquiries, and support activities.

The Successful Applicant

Qualifications:

• Bachelor's degree in Electrical Engineering, Electronics Engineering, or related field.
• At least 3 years of experience in technical support, application engineering, or related roles within the electrical or automation industry.
• Strong technical expertise in electrical systems, automation technologies, and building management systems.
• Excellent communication and interpersonal skills, with the ability to effectively communicate technical concepts to diverse audiences.
• Proven ability to work independently and collaboratively in a fast-paced environment, managing multiple priorities and stakeholders.
• Willingness to travel frequently within the Asia-Pacific region as needed.

What's on Offer

The company provides unique opportunity to be part of a dynamic and innovative team at the forefront of the electrical and automation industry in the Asia-Pacific region. Employees benefit from a rich heritage of quality, reliability, and cutting-edge technology spanning nearly eight decades. Individuals can expect a collaborative and inclusive work environment where their talents are valued and nurtured. With a focus on continuous learning and development, employees have access to ongoing training and career advancement opportunities, enabling them to grow both personally and professionally. The company competitive compensation packages, comprehensive benefits, and a range of employee perks, ensuring that candidates not only contribute to the company's success but also thrive in their own career journeys.

Contact

Timothy Huang (Lic No: R1980928/ EA no: 18S9099)

Quote job ref

JN-032024-6372853

Phone number

+65 6416 9863

Michael Page International Pte Ltd | Registration No. 199804751N

As part of IME’s Photonics & Sensors Department, the candidate will take lead of the development of various testing capability for advanced photonics, including but not limited to chip-level and wafer-level testing of optical devices and electro-optical devices at high RF frequencies, as well as the testing of electro-optical sub-modules and sub-systems. You will work closely with an excellent multidisciplinary team working on advanced photonics.

Responsibilities:

• Develop various photonics testing capabilities for both chips and wafers, including design and building of measurement setups
• Perform chip-scale and wafer-scale data collection for OE, EO and OO devices from frequency range of 0 to 110 GHz
• Optimize data acquisition and analysis process to improve test efficiency, e.g. automation of measurement processes for wafer-scale testing and corner analysis
• Manage photonics laboratory including facilities, health and safety, equipment calibration, inventory and stocktake
• Take the lead to procure laboratory equipment and consumables
• Prepare technical presentations and papers for internal meetings, as well as conferences and journals
• Collaborate with project team to ensure quality and on-time delivery for various projects
• Performs other duties as assigned.

Qualifications:

• Bachelor’s or master’s degree in Physics, Electronic/Electrical Engineering, Photonics, Opto-electronics or equivalent
• More than 5 years hands-on experience in active photonics/optoelectronic device testing, especially for high-speed optical modulator and photodetector devices and electronic-photonic integrated circuit.
• More than 5 years hands-on experiences in optical setup construction and semiconductor & optoelectronic device characterization
• Experienced on experimental data acquisition and analysis
• Skillsets in programming or instrument automation is a plus
• Strong skills in problem-solving, communication and providing technical presentations
• Industry experience and awareness is a plus

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

A qualified candidate will be self-motivated with strong technical and analytical skills as well as possess practical and hands-on approach to engineering control in the areas of metrology management

Responsibilities:

· Recipe creation and optimisation for new R&D applications requirement.
- Preventive and corrective maintenance planning cum execution and vendor management.

· To take charge of new tools technical assessment and tender creation (equipment cum process application startup) and service contract tender set-up

· Drive continuous improvement projects (CIP) to achieve better measurement repeatability (MSA, GR&R, SPC etc).

· To set-up appropriate process and product control plan and out of control action plans (OCAP)

· Provide technical training to related staff on best-known practices in terms of application metrology recipe creation.

Requirement:

· Bachelor degree in Electrical and Electronics, Material, Physics or Chemical engineering

· Minimum 3~5 years of hands-on semiconductor experience (preferably in metrology application and equipment maintenance)

· Possess computer soft ware skills (i.e. JMP, Minitab, SQL, Visual basic, etc)

· Knowledge in problem solving and quality control skills (i.e. LEAN 6sigma, RCA, DOE, etc)

Job Description:

Be part of an exciting FAB Team working on cutting-edge advanced packaging process technologies. Partner and work with various teams in IME, to be the lead in FAB inventory management, logistic planning, and its related operations to always enable smooth operations and develop packaging solutions and taking the solutions from concept to production. Responsibilities will also include assisting in operations support in FAB clean rooms to ensure all rounded supports are provided.

This position is based in Singapore.

Responsibilities:

- Looking for a reliable, agile, and professional individual.

- Able to understand, look ahead, plans the production schedules etc, and provide day to day supports in materials / spare parts procurement, inventory and logistics management to ensure smooth Fab operations.

- Initiate, lead and provide day to day supports in all logistics needs and initiate material/spare parts procurements when required to ensure smooth Fab operations.

- Follow through all the orders initiated from the start of purchase till delivery. Ensure the orders are delivered are on time.

- Accountable for the inventories required to enable smooth FAB cleanroom operations.

- Work seamlessly with various stakeholders to ensure inventory adequacy and logistics efficiencies.

- Employ critical thinking and put-up good initiatives to move forward towards systematic inventory digitalization.

- Ability to work in a multi-task environment.

Experience:

- Education: Diploma/Degree in engineering or supply chain discipline.

- Process strong customer service mind-set with excellent interpersonal and communication skills.

- Preferably some knowledge of supply chain analytics, experiences in semiconductor / manufacturing environment, with good wide contacts with semiconductor material suppliers, equipment vendors.

- Fresh graduate can be considered as well.

Job Description:

Be part of an exciting FAB Team working on cutting-edge advanced packaging process technologies. Partner and work with various teams in IME, to be the lead in FAB inventory management, logistic planning, and its related operations to always enable smooth operations and develop packaging solutions and taking the solutions from concept to production. Responsibilities will also include assisting in operations support in FAB clean rooms to ensure all rounded supports are provided.

This position is based in Singapore.

Responsibilities:

- Looking for a reliable, agile, and professional individual.

- Able to understand, look ahead, plans the production schedules etc, and provide day to day supports in materials / spare parts procurement, inventory and logistics management to ensure smooth Fab operations.

- Initiate, lead and provide day to day supports in all logistics needs and initiate material/spare parts procurements when required to ensure smooth Fab operations.

- Follow through all the orders initiated from the start of purchase till delivery. Ensure the orders are delivered are on time.

- Accountable for the inventories required to enable smooth FAB cleanroom operations.

- Work seamlessly with various stakeholders to ensure inventory adequacy and logistics efficiencies.

- Employ critical thinking and put-up good initiatives to move forward towards systematic inventory digitalization.

- Ability to work in a multi-task environment.

Experience:

- Education: Diploma/Degree in engineering or supply chain discipline.

- Process strong customer service mind-set with excellent interpersonal and communication skills.

- Preferably some knowledge of supply chain analytics, experiences in semiconductor / manufacturing environment, with good wide contacts with semiconductor material suppliers, equipment vendors.

- Fresh graduate can be considered as well.

As part of IME’s Photonics & Sensors Department, the candidate will take lead of the development of various testing capability for advanced photonics, including but not limited to chip-level and wafer-level testing of optical devices and electro-optical devices at high RF frequencies, as well as the testing of electro-optical sub-modules and sub-systems. You will work closely with an excellent multidisciplinary team working on advanced photonics.

Responsibilities:

• Develop various photonics testing capabilities for both chips and wafers, including design and building of measurement setups
• Perform chip-scale and wafer-scale data collection for OE, EO and OO devices from frequency range of 0 to 110 GHz
• Optimize data acquisition and analysis process to improve test efficiency, e.g. automation of measurement processes for wafer-scale testing and corner analysis
• Manage photonics laboratory including facilities, health and safety, equipment calibration, inventory and stocktake
• Take the lead to procure laboratory equipment and consumables
• Prepare technical presentations and papers for internal meetings, as well as conferences and journals
• Collaborate with project team to ensure quality and on-time delivery for various projects
• Performs other duties as assigned.

Qualifications:

• Bachelor’s or master’s degree in Physics, Electronic/Electrical Engineering, Photonics, Opto-electronics or equivalent
• More than 3 years hands-on experience in active photonics/optoelectronic device testing, especially for high-speed optical modulator and photodetector devices and electronic-photonic integrated circuit.
• More than 3 years hands-on experiences in optical setup construction and semiconductor & optoelectronic device characterization
• Experienced on experimental data acquisition and analysis
• Skillsets in programming or instrument automation is a plus
• Strong skills in problem-solving, communication and providing technical presentations
• Industry experience and awareness is a plus

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

A qualified candidate will be self-motivated with strong technical and analytical skills as well as possess practical and hands-on approach to engineering control in the areas of metrology management

Responsibilities:

· Recipe creation and optimisation for new R&D applications requirement.
- Preventive and corrective maintenance planning cum execution and vendor management.

· To take charge of new tools technical assessment and tender creation (equipment cum process application startup) and service contract tender set-up

· Drive continuous improvement projects (CIP) to achieve better measurement repeatability (MSA, GR&R, SPC etc).

· To set-up appropriate process and product control plan and out of control action plans (OCAP)

· Provide technical training to related staff on best-known practices in terms of application metrology recipe creation.

Requirement:

· Bachelor degree in Electrical and Electronics, Material, Physics or Chemical engineering

· Minimum 3~5 years of hands-on semiconductor experience (preferably in metrology application and equipment maintenance)

· Possess computer soft ware skills (i.e. JMP, Minitab, SQL, Visual basic, etc)

· Knowledge in problem solving and quality control skills (i.e. LEAN 6sigma, RCA, DOE, etc)

The School of Electrical and Electronic Engineering is one of the founding Schools of the Nanyang Technological University. Built on a culture of excellence, the School is renowned for its high academic standards and research. With more than 130 faculty members and an enrolment of more than 4,000, of which close to 1,000 are graduate students, it is one of the largest EEE schools in the world and ranks 4th in the field of Electrical & Electronic Engineering in the 2021 QS World University Rankings by Subjects.

EEE is inviting applications for the position of Senior Research Engineer I. The Senior Research Engineer I (USRP and Experimental Platform Development) will be mainly responsible for the programming on Labview platform to support the USRP based wireless communication systems.

Key Responsibilities:

• Responsible for USRP based wireless communication system building and corresponding platform programming.

• Have solid background on wireless communication, especially for antenna design and microwave transmission.

• Develop Labview based codes, and implement corresponding algorithms in wireless communication systems.

• Prototyping the SS-CPM/PD-NOMA and FH-SCMA/CD-NOMA algorithms into USRP-2974 with NI Labview and test its efficacy in the lab environment.

• To demonstrate the above algorithms in the laboratory with a minimum of 3 nodes, and evaluate the performance of the algorithms.

• Work with team members to ensure smooth integration of various subsystems.

• Document all processes and implementation.

• Manage tasks according to the project schedule.

• Work closely with PI, team members and collaborators to ensure timely and efficient completion of project milestones.

• Keep track of technology trends.

Job Requirements:

• Bachelor’s degree and above in Electronic Engineering or related field from a reputable university.

• Diploma with good industry experience may also be considered.

• Experience in embedded software development.

• Proficient and good skill in c programing, able to design corresponding code according to project requirement

• Candidate with knowledge of SCMA, CPM and NOMA would be preferred.

• Good understanding and ability in wireless communication systems, especially for antenna design and microwave transmission.

• Able to multi-task and work in a dynamic environment.

• Fluent verbal and written communications in English.

• Experiences in USRP development, wireless communication system building.

• Experiences in programming software (e.g., MATLAB, C, and C++).

We regret that only shortlisted candidates will be notified.

SECTION 1: POSITION DETAILS

Job Title for Posting

Assistant Process Engineer

KEY JOB PURPOSE

You are required to ensure the smooth operation of his/her assigned process unit. Your primary responsibility will be to assist our research team in conducting experiments, analyzing data, and providing technical support to advance the understanding and performance of the solar cell fabrication processes. You will work closely with researchers and process engineers to contribute to cutting-edge research in the field and help drive the development of next-generation photovoltaics.

KEY RESPONSIBILITIES

The job scope includes:

•  Prepares substrates/precursors, loads samples and prepares material deposition process for experimentationin time and quality
•  Evaluates performance of process system.
•  Interface with team members, understand their detailed plan and requirement.
•  Monitor process and hardware performance.
•  Records process conditions and experimental observations.
•  Measure and characterize materials and devices.
•  Report data to the research team.
•  Assist in laboratory and equipment maintenance.
•  Assist in ordering equipment, chemicals and consumables, and coordinates with vendors and purchasing.
•  Perform routine shut down procedure.
•  Ensure cleanliness of work area, upkeep equipment and assists in maintenance program and operating of equipment.
•  Part of the Emergency Response Team Member in the Company to react in all sort of emergency and execute function as a first aider.

COMPETENCIES AND QUALIFICATION REQUIREMENTS

•  Diploma or Bachelor's degree in materials science, chemistry, electrical engineering, chemical engineering, or a related field.
•  Enjoy hands-on duties daily (non-desk bound) which may include carrying items, walking, working etc.
•  Capable to work in a clean laboratory environment daily
•  No disciplinary issues history
•  Self-disciplined, good team player Responsible and independent worker
•  Reactive to malfunctions
•  High self-motivated and effective team player with good communication skills
•  Attentive to details
•  Strong problem-solving skills and a passion for scientific inquiry.
•  Good written and verbal communication skills (both in Mandarin and English)
•  Knowledge of safety protocols and practices in a laboratory setting.

ABRIDGED VERSION OF JOB DESCRIPTION AND REQUIREMENTS

We are looking for a focused and highly motivated individual to contribute to a dynamic and growing team. This team focuses on the fabrication of next-generation photovoltaic technology in our flagship project. We regret that only shortlisted candidates will be notified.

Responsibilities:

1. Contribute to high-quality research and development work in TCOMS laboratory through:

· design of scaled physical test models, such as maritime vessels, offshore rigs, marine renewable platforms, and aquaculture systems for testing in TCOMS Ocean Basin.

· generation of detailed design, production, assembly, and as-built drawings of test models.

· leading a team of engineers and technicians on model fabrication and modification, calibration, instrumentation, and experimental setup.

· design of embedded sensors to enhance the measurement of models' behaviour and response.

· document design processes, methodologies, and results.

· engagement with external vendors for component sourcing and additional modification work that are beyond the present capabilities of TCOMS laboratory.

2. Perform research in the following areas:

· Offshore hydrodynamics

· Loads, motions and response analysis of Marine & Offshore platforms and floating structures

· Fluid-structure interactions

3. Collaborate with internal teams, affiliated research institutes and other relevant stakeholders in proposal preparation and submission.

Requirements:

Qualification & Field of Study:

· Bachelor's degree in following or related disciplines:

o Mechanical Engineering, Mechatronics,

o Ocean Engineering, Marine Engineering, Offshore Engineering,

o Electrical Engineering, Computer Engineering / Science

o Offshore/Civil/Structural Engineering, Applied Mathematics

Experience:

· 2 to 3 years of relevant work experience in the following areas:

o Mechanical design.

o Naval Architecture, ocean engineering, marine engineering, hydrodynamics, and systems engineering.

o Project management/productivity software/tools such as MS Office, MS Project.

o Marine structures, offshore structural engineering.

· Proficient with 3D modelling tools such as SolidWorks and AutoCAD.

· Prior experience / knowledge in one or more of the following software /programming languages will be preferred:

o SolidWorks, Rhino, and AutoCAD,

o WAMIT, OrcaFlex, SESAM Suite or equivalent,

o Finite Element analysis tools such as SESAM, ABAQUS, Ansys

· StarCCM+, OpenFOAM,

· Matlab, Fortran, Python and/or C++

· Model experiments in wave flumes, wave tank or ocean basin.

Other Requirements:

· Good interpersonal and communications skills.

· Good organization and interface management skills.

· Ability to adapt and work effectively as team player.

· Resourceful and self-driven with a high degree of professional integrity.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

While candidates in the listed location(s) are encouraged for this role, candidates in other locations will be considered.

The Global Staff Learning Platform Engineer will be responsible for developing and maintaining any code associated with integrations between Learning Platforms including but not limited to the learning management system (LMS), lab platforms, curriculum and lab publishing, and productivity tools. The Staff Learning Platform Engineer will build relationships with stakeholders within Learning & Enablement (L&E) to automate manual processes and ensure the most efficient and effective systems are available to create effective training for our customers. This role will collaborate with cross functional stakeholders and external platform vendors, define business requirements, architect, create, and maintain the code base for any automations, and continuously seek to improve the user experience for any customers using said automations.

The impact you will have:

• Architect, develop, and maintain automation for the business to enable curriculum development and training delivery
• Create API-based solutions to integrate solutions between learning platforms
• Identify and solve manual processes to automate
• Build relationships with the organization and adjacent business units to solve larger problems as a team
• Lead vendor teams handling publishing for content, including localized content

The impact you will have:

• 4-year degree (or equivalent experience) in Computer Science or related field with demonstrated ability
• 5+ years of experience in public cloud technologies (AWS, Google Cloud, or Azure)
• Proven experience in CICD tools (Source Control, Build, Deploy)
• Ability to solve high complexity issues
• Experience communicating updates and resolutions to customers and cross-functional stakeholders
• Ability to take a given problem and complete a solution
• Extensive development experience with JavaScript, CSS, Node.js, Python, and other API technologies
• Experience in API design and creating RESTful API patterns
• Understanding of learning management systems (LMS)
• Deep knowledge of lab platform technologies

NTU-PKU Joint Research Institute mainly focus on joint research in Multi-Modal Big Data Analytics for Smart Cities. The research will support Singapore’s Smart Nation vision that harnesses technology and data to improve living standards, strengthen communities, and create more business opportunities.

The project involves the use of deep learning for object detection, human pose estimation, and 3D face modeling & simulation.

The Senior Research Engineer will be responsible for the development of Computer Vision solutions, as well as planning, implementing, and management of GPU computing infrastructure for research on Computer Vision, Image Processing, and Multimedia Forensics.

Key Responsibilities:

• Working in research teams on Computer Vision projects in object detection, action & event recognition, and scene understanding
• Design, implementation, and management of the GPU computing infrastructure for ROSE Lab
• Hardware installation, and module level failure diagnosis and repair, as well as liaison and management of vendors for systems, storage, network, and server room facilities

Job Requirements:

• Bachelors degree in Computer Science and/or Engineering, or related field
• At least 10-years’ experience in Computer Vision, Linux systems and NVIDIA GPU management and related areas
• Research experience in Computer Vision, Pattern Recognition, Deep Learning, and working with large-scale datasets, in particular in a university or research lab
• Proficiency in systems such as Linux (Ubuntu, centos), shell scripting, Docker, NFS and MooseFS, is mandatory.
• Proficiency in software such as Caffe, PyTorch, TensorFlow, OpenCV, and programming languages such as C/C++ and Python is essential.
• Knowledge of GPU computing, CUDA programming, optimization (eg. with TensorRT), and industry experience in engineering software development would be a strong advantage.
• Good inter-personal skills, with the ability to work with people from varied backgrounds

We regret that only shortlisted candidates will be notified.

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processes only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

The Research Engineer shall conduct experiments on lab-scale and pilot-scale studies of the related process for seawater treatment. The candidate will be handling and collecting seawater samples, and perform physicochemical analyses of the samples from the studies.

Qualifications

• Applicants should have a Bachelor degree in environmental, civil, chemical engineering or related field

• Effective communication skills and inter-group communication.

• Ability to write and converse well in English

• Good organisational skills and adaptability

COMPANY DESCRIPTION

Singapore Management University is a place where high-level professionalism blends together with a healthy informality. The 'family-like' atmosphere among the SMU community fosters a culture where employees work, plan, organise and play together building a strong collegiality and morale within the university.

Our commitment to attract and retain talent is ongoing. We offer attractive benefits and welfare, competitive compensation packages, and generous professional development opportunities all to meet the work-life needs of our staff. No wonder, then, that SMU continues to be given numerous awards and recognition for its human resource excellence.

RESPONSIBILITIES

• Design and implement AI for software engineering solutions.
• Conduct evaluations and/or user studies to validate the effectiveness of the algorithms and tools.
• Write and publish research papers and present them to reputable academic conferences.
• Package the documents, implementation code, evaluation results of the project for release.
• Liaise with other team members of this project to realize the overall goal of the project.

• Minimum Bachelor Degree in Software Engineering/Computer Science/Computer Technology/Information Systems.
• Minimum 1 year of relevant research experience in AI for software engineering research.
• Excellent knowledge about software engineering research.
• Excellent knowledge about AI.
• Highly fluent in programming.
• Competent in designing and implementing algorithms and data structures.
• Excellent oral and written communication skills.
• Excellent analytical, technical and problem solving skills.
• Self-motivated individual who can work independently and also collaboratively with team members.
• Able to work under strict deadlines.

#LI-XL1

Summary:

Skywork AI Singapore welcomes enthusiastic and forward-thinking research engineers to join our dynamic team at the Kunlun-2050 Research Lab Singapore. Being a new entrant in Singapore’s R&D landscape, we are dedicated to pushing the boundaries of Artificial General Intelligence (AGI) through foundational and application research, with a particular focus on Foundation Model 2.0 and Agents. Foundation Model 2.0 encompasses various dimensions, including pioneering new foundation modes and applications, optimizing training and inference acceleration, and conducting theoretical studies to enhance interpretability. Our work on Agents delves into both virtual and physical agents, propelling us into the forefront of AGI development.

We invite individuals who share our passion for AGI advancement and are eager to make their mark in the field to apply and become a vital part of our evolving team. Join us to contribute to cutting-edge research and explore the potential for technology transfer into Skywork AI's core products.

Key Responsibilities:

· Implement intricate algorithms and enhance model scalability

· Provide comprehensive engineering support to the research team

· Develop reusable libraries to support research in AGI field, focusing on Foundation Model 2.0 and Agents.

· Collaborate closely with our interdisciplinary team to publish influential research findings in top-tiered conferences and journals, making a significant impact on the AGI community.

· Actively explore technology transfer opportunities into Skywork AI's core products.

Desirable Experience:

· Hold a Bachelor’s degree or higher in computer science, statistics, engineering, applied mathematics, data science or related fields

· Possess more than three years of related work experience

· Demonstrated proficiency in programming languages

· Hands-on experience with deep learning frameworks and familiar with development tools

· Actively contribute to open-source projects

· Achievement in programming competitions and regional contests

· Attain esteemed recognition within the academic and professional community

Apply:

If you're excited to be part of our cutting-edge research team in the AGI space, please send your latest Curriculum Vitae to [email protected] to explore this exciting opportunity.

Skywork AI Singapore is committed to fostering diversity and welcomes candidates from all backgrounds to apply. Join us in shaping the future of AGI at Kunlun-2050 Research Lab. Your contributions can be instrumental in defining our journey as a new start-up in this dynamic field

COMPANY DESCRIPTION

Singapore Management University is a place where high-level professionalism blends together with a healthy informality. The 'family-like' atmosphere among the SMU community fosters a culture where employees work, plan, organise and play together building a strong collegiality and morale within the university.

Our commitment to attract and retain talent is ongoing. We offer attractive benefits and welfare, competitive compensation packages, and generous professional development opportunities all to meet the work-life needs of our staff. No wonder, then, that SMU continues to be given numerous awards and recognition for its human resource excellence.

RESPONSIBILITIES

• Design and implement AI for software engineering solutions.
• Conduct evaluations and/or user studies to validate the effectiveness of the algorithms and tools.
• Write and publish research papers and present them to reputable academic conferences.
• Package the documents, implementation code, evaluation results of the project for release.
• Liaise with other team members of this project to realize the overall goal of the project.

• Minimum Bachelor Degree in Software Engineering/Computer Science/Computer Technology/Information Systems.
• Minimum 1 year of relevant research experience in AI for software engineering research.
• Excellent knowledge about software engineering research.
• Excellent knowledge about AI.
• Highly fluent in programming.
• Competent in designing and implementing algorithms and data structures.
• Excellent oral and written communication skills.
• Excellent analytical, technical and problem solving skills.
• Self-motivated individual who can work independently and also collaboratively with team members.
• Able to work under strict deadlines.

#LI-XL1

The School of EEE invites applications for the position of Senior Research Engineer I (Satellite System Hardware).

The Research Engineer will work on a project to conduct the research on development of energy harvesting systems used in low power smart sensors for monitoring of buildings and bridges, as well as the integration of energy harvesters, power management circuit and monitoring sensors.

Key Responsibilities:

• Design and develop MCU/MPU/SOC platform.
• Analyze system requirements and generate modular specifications.
• Identify and qualify components for spacecraft operation.
• Build, test and modify prototypes.
• Circuit validation and system operational validation.
• Test and characterize circuits.
• Code and debug in embedded C.
• FPGA programming.
• Guide/design printed circuits to comply to EMC/EMI requirements.
• Work with team members to ensure smooth integration of various subsystems.
• Document all process and implementation.
• Manage tasks according to project schedule.
• Support the centre and project operation, such as satellite mission operation, satellite testing and student activities.
• Work on a project to conduct the research on development of energy harvesting systems used in low power smart sensors for monitoring of buildings and bridges.
• Work on integration of energy harvesters, power management circuit and monitoring sensors.

Job Requirements:

• Bachelor‘s degree and above in Electronic Engineering or related field from a reputable university.
• Diploma with good industry experience may also be considered.
• Experience in MCU/MPU/SOC embedded system platform design and programming.
• Good understanding and ability in analog and digital circuit design
• Proficient and good skill in pcb artwork such as Altium or Orcad.
• Knowledge of various embedded hardware and application systems.
• Experience in generation of design specification documentation, schematic capture, and circuit analysis and simulation.
• Experience with debugging tools such as bus and spectrum analyzer.
• Experience in CAN, SPI, I2C bus protocols.
• Able to multi-task and work in a dynamic environment.
• Fluent verbal and written communications in English.
• Complete full product life cycle knowledge is preferred.
• Experiences in FPGA, Analog or RF design is preferred.

We regret that only shortlisted candidates will be notified.

Hiring Institution: NTU

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

(1) Design and Synthesis of electrocatalyst for oxygen evolution reaction of water electrolysis.
(2) Structure characterization and simulation of the obtained electrocatalysts.
(3) Performance test and mechanism study of the obtained electrocatalysts.

Qualifications

Master degree in MSE, Chemistry or other relevant majors.

COMPANY DESCRIPTION

Singapore Management University is a place where high-level professionalism blends together with a healthy informality. The 'family-like' atmosphere among the SMU community fosters a culture where employees work, plan, organise and play together building a strong collegiality and morale within the university.

Our commitment to attract and retain talent is ongoing. We offer attractive benefits and welfare, competitive compensation packages, and generous professional development opportunities all to meet the work-life needs of our staff. No wonder, then, that SMU continues to be given numerous awards and recognition for its human resource excellence.

RESPONSIBILITIES

• Investigate the state-of-the-art of Web 3 security development.
• Create case from SlowMist Web 3 security report database.
• Use data mining and AI technology to build pattern and model library from SlowMist data.
• Conduct experiments to evaluate solutionse) Draft report and research paper with supervision.

• Minimum Bachelor's degree in Computer Science, Information Technology, Information Systems or closely related disciplines.
• Minimum 5 years of relevant research or industrial experience in Web 3 security domain.
• Basic knowledge/Proficiency in programming software/languages such as C and Java will be positively considered/ is required.
• Demonstrated experience and know-how on Web 3 security.
• Experience with at least one programming software/languages, such as C, C++, Java, Python is preferred
• Excellent working knowledge of blockchain ecosystem.
• Good analytical, technical and problem solving skills.
• Applicants with research publications in data mining and AI area will be advantageous.
• Self-motivated individual who can work independently and also collaboratively with team members.

#LI-XL1

Purpose: This position seeks to recruit an experienced research engineer to assist in developing new sustainable methodologies for chemical breakdown of waste plastics.

Job Responsibilities:

• The researcher will be involved in and contribute actively to waste plastics upcycling research, including but not limited to the following:
• Assist in synthesis and characterisation of homogeneous and heterogeneous catalysts and assist in reaction screening
• Be in charge of essential research equipment and maintennance
• Assist in training and mentoring staff, interns and students as and when required
• Curating and managing experimental data, and assist in preparation of reports, presentations, technological disclosures and manuscripts

Job Requirements:

• MSc in Chemistry or equivalent with at least 3 years experience
• Familiar with chemical synthesis and routine/ essential characterization techniques
• Strong communication and interpersonal skills and ability to work cohesively in a team whilst sharing resources
• Strong interest to learn about new technologies
• Excellent organizational skills including attention to details
• Willingness to learn, with adaptability and flexibility to take on required/necessary tasks beyond the job description

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

About the role: We are seeking a highly skilled AI/Machine Learning Engineer to join our Global Transformation Company. As an AI/Machine Learning Engineer, you will be responsible for developing and implementing algorithms and models to improve our healthcare services and patient outcomes. You will work closely with cross-functional teams including physicians, data scientists, and software engineers to identify areas of improvement and develop innovative solutions using artificial intelligence and machine learning techniques.

In this role, you will have the opportunity to make a significant impact on the healthcare industry by leveraging cutting-edge technologies. The ideal candidate is passionate about healthcare and has a strong background in AI and machine learning, with experience in applying these technologies to real-world problems.

Responsibilities:

· Develop and implement machine learning algorithms and models to analyze large volumes of healthcare data.

· Collaborate with cross-functional teams to identify business needs and design appropriate solutions.

· Enhance and optimize existing machine learning models to improve accuracy and efficiency.

· Conduct thorough data analysis and visualization to detect patterns and identify trends.

· Evaluate the performance of developed models and propose necessary improvements.

· Stay updated with the latest trends and advancements in the field of AI and machine learning.

· Collaborate with software engineers to integrate AI models into our healthcare systems.

Qualifications & Experience:

· Bachelor's degree in Computer Science, Data Science, or a related field; Master's or PhD preferred.

· Proven experience in developing and implementing machine learning algorithms and models.

· Strong knowledge of AI and machine learning frameworks and libraries.

· Proficient in programming languages such as Python, R, or Java.

· Experience with big data technologies and distributed computing frameworks, such as Hadoop or Spark.

· Solid understanding of data preprocessing, feature engineering, and data visualization techniques.

· Familiarity with healthcare data standards and privacy regulations (e.g., HIPAA).

· Excellent problem-solving and analytical skills.

· Strong verbal and written communication skills.

· Ability to work effectively in a cross-functional team environment.

· Previous experience in the healthcare industry is a plus.

Skills:

· Outstanding interpersonal and communication skills.

· Strong planning, organization, and time management skills.

· Deep understanding of clinical data validation, reporting, and analysis.

· Demonstrable success in stakeholder interactions, delivering aligned solutions.

· Familiarity with clinical environments and terminology.

· Strong values of integrity, commitment, and self-improvement.

· A methodical, thorough yet flexible approach.

· Process-driven mindset.

Responsibilities:
1. The candidate will be required to perform on-wafer device testing, test data analysis & perform test measurement automation
2. The candidate should have hands-on experience in using an oscilloscope, power supply, analyzer, probe station, and related test tools and data presentation
3. The candidate should know basic programming to instrumentation control using LabView, MATLAB, and other software such as Visual Basic, Python, C++, etc. as a plus
4. The candidate is required to have basic knowledge of semiconductor devices
5. Understanding the device"s electrical parameters such as current-voltage characteristics, resistance, capacitance, inductance, etc. will be an advantage

Qualifications:
1. ITE/Diploma with relevant sutdy (Electrical, Electronics, Computer Engineering, Physics, etc.) can be considered
2. Fresh graduate or 2-3 years experience in electrical instrument handling and system automation
3. Highly motivated to succeed, a self-starter who is driven and able to work with others effectively to get things done
4. Semiconductor industry experience is a plus

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

We are developing innovative RF and microwave systems for communication and remote sensing using RF and microwave components and system-on-chip (RFSoC).

As part of this project, we have a position open for a research engineer who has in-depth knowledge and experience with RFSoC, such as the Xilinx family of RFsoCs.

You will work in a team that designs and tests RF and microwave subsystems.

The following must be included in your resume:
• A summary of RFSoC projects that you were involved in.
• A list of the RFSoC design tools you have experience with.
• A list of programming languages you have experience with.

Qualifications

• Possess a Bachelor or Master degree in engineering
• Several years of experience with radio frequency system-on-chip (RFsoC) or similar technologies.
• Able to work independently and in a team.
• Available for travel for conferences, trainings, and meetings with companies.
• Open to fixed-term contract.