Total 149 research nurse job vacancies in Engineering category in Singapore

Ensure operational excellence and regulatory compliance in the centre.

Responsibilities:

• Provide operational support in the centre day-to-day and during center events
• Support the organization operations and research need through the workshops/laboratories, offices, building infrastructure and premise security management
• Conduct daily walkabout in the centre to ensure the centre is in good operational condition, uncompromised security and safety compliance
• Ensure a safe working environment within the centre
• Track, maintain and order the operational inventories and maintain a systematic filing system
• Work closely with in-house contractors for facilities feedback to keep the centre in a daily operational state
• Assist in liaising and sourcing of vendor for quotation, equipment, service and monitor the contractor work?s quality, schedule and ensure safety during the execution
• Handle requests and queries from staff and management
• Work together with internal stakeholders/partners to support the entity in center operations
• Assist in executing corporate facilities related projects
• Investigate, check and analyze reported on any workshop and laboratory breakdown
• Facilitate in the facilities related SOPs, Forms and presentation materials
• Perform essential handyman work when needed
• Assist in statutory audit and internal audit
• Any other duties assigned by supervisor

Job requirements

• At least diploma in related field (Facilities / Safety / Operations)
• Minimum 1 to 2 years of relevant experience in operations for workshop, laboratory, facility, building services, electrical and mechanical
• Willing to be scheduled to occasionally work off shift hours in support of operations
• Able to breakdown the assigned work into deliverable tasks and provide realistic timeline for their completion
• Competency in Microsoft Office, AV system. Experience in office outfitting/ relocation projects is added advantage.
• Experience in supervising contractors, facility management and their sub-contractors
• Some understanding in the HS&E requirement
• A self-driven and meticulous individual who has the strong ability to multi-task

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

We are looking for an energetic and motivated engineer to join our team. In this position you’ll play an important role in helping to develop cutting edge manufacturing technologies, as well in helping companies innovate and grow. And while doing so you’ll have the opportunity to work directly in and understand the industrial environment.

If you are passionate about engineering, process development, operating heavy machinery, advanced manufacturing, materials, and processes, this could be the role for you!

JOB DESCRIPTION

• Provide technical support and conduct process trials/experiments for both research and industry projects.
• Be an integral member of a metal casting team involving the operation of heavy machinery.
• Conduct materials characterization and testing.
• Engage with industry partners, customers and research collaborators to develop and execute plans.
• Provide timely project update and reports to team members, collaborators, and sponsors.
• Perform other ad-hoc roles / tasks as required / assigned.

JOB REQUIREMENT

• Bachelor’s degree in mechanical engineering / Materials Science and Engineering.
• Experience and knowledge in metallurgy, metal solidification and behaviour.
• Knowledge with CAD or SolidWorks is preferred but not required.
• Experience in an R&D environment or related industry is preferred but not required.

These are some of the soft skills we are looking for:

• Self-driven and proactive, apply logic and reason to effectively solve problems and manage risks.
• Team player with the ability to work effectively and independently within the team.
• Welcoming ideas from others and drive processes forward in an inclusive manner.
• Professionalism in communicating and interacting with team members and industry players.
• Attention to detail.
• Keen interest and ability to learn and adapt to new technologies to stay up-to-date and remain relevant.

We are looking for an energetic and motivated engineer to join our team. In this position you’ll play an important role in helping to develop cutting edge manufacturing technologies, as well in helping companies innovate and grow. And while doing so you’ll have the opportunity to work directly in and understand the industrial environment.

If you are passionate about engineering, process development, operating heavy machinery, advanced manufacturing, materials, and processes, this could be the role for you!

JOB DESCRIPTION

• Provide technical support and conduct process trials/experiments for both research and industry projects.
• Be an integral member of a metal casting team involving the operation of heavy machinery.
• Conduct materials characterization and testing.
• Engage with industry partners, customers and research collaborators to develop and execute plans.
• Provide timely project update and reports to team members, collaborators, and sponsors.
• Perform other ad-hoc roles / tasks as required / assigned.

JOB REQUIREMENT

• Bachelor’s degree in mechanical engineering / Materials Science and Engineering.
• Experience and knowledge in metallurgy, metal solidification and behaviour.
• Knowledge with CAD or SolidWorks is preferred but not required.
• Experience in an R&D environment or related industry is preferred but not required.

These are some of the soft skills we are looking for:

• Self-driven and proactive, apply logic and reason to effectively solve problems and manage risks.
• Team player with the ability to work effectively and independently within the team.
• Welcoming ideas from others and drive processes forward in an inclusive manner.
• Professionalism in communicating and interacting with team members and industry players.
• Attention to detail.
• Keen interest and ability to learn and adapt to new technologies to stay up-to-date and remain relevant.

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma holders with at least 5 or more years of experience in Mechanical/Electrical/Chemical engineering or equivalent with at least 5 years of relevant experience
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description:

We are looking for a highly motivated computational scientist with a deep understanding of chemistry/cheminformatics and structural biology to develop new AI models for ligand discovery. You will be working on a large collaborative project to build up A*STAR’s computational drug discovery capabilities. The candidate is expected to be familiar with the latest generative models. Familiarity with molecular docking programs is a plus.

Job Requirements:

• PhD degree in life sciences, chemistry, computational biology, or a related discipline
• Passion for science and research
• Highly motivated
• Proficiency in the use of machine learning frameworks (e.g. PyTorch, TensorFlow)
• Experienced in developing generative models
• Strong knowledge of chemistry/cheminformatics and structural biology
• Able to work independently and as part of a team
• Excellent written and oral communication skills

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Summary:

We are seeking a skilled and experienced Mechanical Design Engineer to join our dynamic team. The successful candidate will be responsible for designing and developing mechanical systems and components for DxD Hub. The role involves collaborating with cross-functional teams, utilising CAD software, conducting feasibility studies, verification testing and ensuring designs meet technical and regulatory requirements.

Roles and Responsibilities

· Conceptualise, design, and develop mechanical components and mechanisms for medical devices

· Prepare and maintain design documentation such as specifications, bill of materials, test protocols, test reports, etc.

· Perform structural analysis, thermal analysis, and other relevant tests to validate and optimise designs.

· Conduct feasibility studies to assess the viability and performance of proposed designs.

· Work closely with cross-functional teams, including biological scientists, electrical engineers, software engineers, and project managers.

· Ensure compliance with DxD Hub Quality Management system, standards, and regulatory requirements such as FDA and ISO13485 etc.

Key Requirements

· Bachelor’s Degree in Mechanical Engineering, or related field. Master"s degree is a plus.

· Minimum 2 years of experience in mechanical design engineering.

· Proficient in CAD software, such as SolidWorks or AutoCAD.

· Strong understanding of engineering principles, materials, and manufacturing processes.

· Excellent problem-solving and analytical skills.

· Effective communication skills and ability to work collaboratively in a team.

· Knowledge in quality, product verification test, QMS, and ISO13485 would be an advantage.

· Self-driven team player who is able to work in a fast-paced environment.

Role Summary/Purpose

Suntar is looking for a highly driven individual equipped with relevant technical skills in ensuring the smooth implementation of electrical design, PLC and HMI programming, installation, and commissioning of industrial membrane separation projects. Participate in project bidding, electrical after-sales service, etcs.

Responsibilities

· Electrical design of engineering projects, control programs for engineering projects, installation, commissioning, execution and supervision of engineering projects.

· Liaise with related parties and ensure smooth operation

· Compilation and summary of project completion materials.

· Participation in preliminary project design and technical support.

· Learning and application of new technologies and processes, design and development of control for new processes and products, assisting in the formulation and improvement of company's electrical control standardization documents.

· Ensure assigned tasks are completed on time

Qualifications / Requirements

· Bachelor's degree or higher in Electrical Engineering, Electrical Automation, Mechatronics, or related fields

· Ability to independently manage the design, installation, and commissioning of large-scale projects

· Minimum of 2 years of experience in engineering installation, commissioning, and troubleshooting

· At least 3 years of related experience in water treatment industry

· Willingness and ability to travel as required

· Strong sense of responsibility, resilience, and teamwork spirit, with a dedication to professional ethics.

· Responsible, resourceful, independent and proactive individual yet able to work well in a team

· Fluency in other regional languages/dialects is a plus, because the role require the candidate to deal international client from other region (Chinese, Hokkien etc.)

This position will have responsibility for providing process support and installation of new plasma etch / clean / deposition systems at customer sites. This includes design, evaluation and documentation of process window for new installations or Lam recommended field hardware modifications / upgrades

1. Work closely with Account team and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues / challenges. Identify areas where Lam is able to value-add.
2. Work with Account team and customers to execute to penetration and defense strategy, including co-ordinating with Global Product Group on product demonstration
3. Perform startup of “capacity add” Lam systems i.e. match results to existing systems and applications
4. Design and complete simple DOE evaluations to characterize process window for new installations or Lam recommended field hardware modifications / upgrades
5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution
6. Develop new processes to new and/or existing customer applications
7. Professionally represent the company to the customer. Utilize knowledge of company’s product lines and service to keep existing / potential customers informed when new/additional needs are identified
8. Develop good customer relations during start-up and trouble-shooting
9. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
10. Ensure safe working condition at work site
11. Any other duties as assigned by the Immediate Supervisor

Job Requirements:

1. Engineering degree or Bachelor of Science (in Chemistry / Physics) or equivalent
2. Systematic and has an analytical mind
3. Good communication and interpersonal relations skill
4. Able to actively engage customers on technical solutions
5. Able to work in Fab environment and perform standby duties

Join the Innovation at ISCE2: Seeking a Visionary and Talented Scientist

Are you ready to be a part of a dynamic, forward-thinking team to drive the future of green and sustainable technology in biomanufacturing?

ISCE2 is actively looking for a passionate Scientist with proven track record in chemical biology, biocatalysis or biotechnology research to join our multi-disciplinary team to develop next generation green and sustainable technology for the manufacturing of fine and specialty chemicals.

What Sets Us Apart:

Next-Generation Technology: Be at the forefront of innovation, utilizing advanced technologies, including automation, data science, AI and machine learning, to accelerate development.

Key responsibilities:

The successful candidate may be responsible for but not limited to:

• Design and develop biocatalytic systems or enzymes for the sustainable (bio)-production of chemicals
• Comfortable in the use of advanced technology, including AI/machine learning to help accelerate development
• Able to lead an independent study
• Analyze data and present research findings at conferences, meetings, and to stakeholders while maintaining accurate records
• Write and publish high impact papers in peer-reviewed journals, alongside preparation of technical disclosures, patent applications
• Supervise and mentor junior researchers, fostering a collaborative and supportive work environment
• Devise both exploration and industrial proposals to seek competitive funding
• Other RI and lab wide duties as assigned by the manager

Requirements:

• PhD in Chemistry, Biocatalysis, Chemical Biology, Biochemistry, Protein engineering or its equivalent
• Strong background in biocatalysis, protein engineering, chemistry, molecular biology and/or biotechnology
• More than 2 years of post-PhD experience preferred
• In depth experience with PCR, protein expression, and/or analytical techniques such as biochemical assays, spectroscopy and chromatography
• Adaptable to team-oriented goals and requirements
• Rigorous data analysis, interpretation, analytical and problem-solving skills
• Excellent oral/written communication, documentation and organization skills
• Meticulous, attention to details and organized
• Ability to prioritize responsibilities and multi-task

What We Offer:

• Innovation Culture: Immerse yourself in a culture of innovation and continuous learning.
• Professional Growth: Opportunities for project management, representation at international events, and career advancement.
• Collaborative Environment: Work alongside top-notch professionals in a collaborative and supportive setting.
• If you are ready to make a significant impact in the realm of sustainable biomanufacturing, we invite you to apply and be a part of our pioneering team at ISCE2.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Join the Innovation at ISCE2: Seeking a Visionary and Talented Scientist

Are you ready to be a part of a dynamic, forward-thinking team to drive the future of green and sustainable technology in biomanufacturing?

ISCE2 is actively looking for a passionate Scientist with proven track record in chemical biology, biocatalysis or biotechnology research to join our multi-disciplinary team to develop next generation green and sustainable technology for the manufacturing of fine and specialty chemicals.

What Sets Us Apart:

Next-Generation Technology: Be at the forefront of innovation, utilizing advanced technologies, including automation, data science, AI and machine learning, to accelerate development.

Key responsibilities:

The successful candidate may be responsible for but not limited to:

• Design and develop biocatalytic systems or enzymes for the sustainable (bio)-production of chemicals
• Comfortable in the use of advanced technology, including AI/machine learning to help accelerate development
• Able to lead an independent study
• Analyze data and present research findings at conferences, meetings, and to stakeholders while maintaining accurate records
• Write and publish high impact papers in peer-reviewed journals, alongside preparation of technical disclosures, patent applications
• Supervise and mentor junior researchers, fostering a collaborative and supportive work environment
• Devise both exploration and industrial proposals to seek competitive funding
• Other RI and lab wide duties as assigned by the manager

Requirements:

• PhD in Chemistry, Biocatalysis, Chemical Biology, Biochemistry, Protein engineering or its equivalent
• Strong background in biocatalysis, protein engineering, chemistry, molecular biology and/or biotechnology
• More than 5 years of post-PhD experience preferred
• In depth experience with PCR, protein expression, and/or analytical techniques such as biochemical assays, spectroscopy and chromatography
• Adaptable to team-oriented goals and requirements
• Rigorous data analysis, interpretation, analytical and problem-solving skills
• Excellent oral/written communication, documentation and organization skills
• Meticulous, attention to details and organized
• Ability to prioritize responsibilities and multi-task

What We Offer:

• Innovation Culture: Immerse yourself in a culture of innovation and continuous learning.
• Professional Growth: Opportunities for project management, representation at international events, and career advancement.
• Collaborative Environment: Work alongside top-notch professionals in a collaborative and supportive setting.
• If you are ready to make a significant impact in the realm of sustainable biomanufacturing, we invite you to apply and be a part of our pioneering team at ISCE2.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

This position will have responsibility for providing process support and installation of new plasma etch / clean / deposition systems at customer sites. This includes design, evaluation and documentation of process window for new installations or Lam recommended field hardware modifications / upgrades

1. Work closely with Account team and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues / challenges. Identify areas where Lam is able to value-add.
2. Work with Account team and customers to execute to penetration and defense strategy, including co-ordinating with Global Product Group on product demonstration
3. Perform startup of “capacity add” Lam systems i.e. match results to existing systems and applications
4. Design and complete simple DOE evaluations to characterize process window for new installations or Lam recommended field hardware modifications / upgrades
5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution
6. Develop new processes to new and/or existing customer applications
7. Professionally represent the company to the customer. Utilize knowledge of company’s product lines and service to keep existing / potential customers informed when new/additional needs are identified
8. Develop good customer relations during start-up and trouble-shooting
9. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
10. Ensure safe working condition at work site
11. Any other duties as assigned by the Immediate Supervisor

Job Requirements:

1. Engineering degree or Bachelor of Science (in Chemistry / Physics) or equivalent
2. Systematic and has an analytical mind
3. Good communication and interpersonal relations skill
4. Able to actively engage customers on technical solutions
5. Able to work in Fab environment and perform standby duties

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma holders with at least 5 or more years of experience in Mechanical/Electrical/Chemical engineering or equivalent with at least 5 years of relevant experience
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma holders with at least 5 or more years of experience in Mechanical/Electrical/Chemical engineering or equivalent with at least 5 years of relevant experience
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

about the company

My client is in the measurement manufacturing sector.With more than 20 years history, this is a great brand to join at an exicting time in their development.

about the job

• Lead continuous improvement projects
• Recommend process changes for improvements
• Negotiate with customers to reconcile product requirements
• Develop lean manufacturing plans
• Conduct quantitative evaluation of quality performance measures
• Develop process plans for manufacturing operations
• Set up sensors and interface systems to automate manufacturing processes

skills & experience required

• Phd / Masters (MSC) in Mechanical / Manufacturing Engineering
• Min 4 years of experience in a lean manufacturing environment
• High Mix Low Volume Manufacturing environment experience will be a plus
• Competency in SAP, TeamCenter, MATLAB, Statistics Process Control Software (SPSS) will be an advantage
• Training given to candidates with no experience

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

The project aims at designing and developing cybersecurity solutions for wide range of cyber physical systems / modernized critical infrastructure (e.g., smart home, smart building, smart grid, etc.). The expected outcome is product-ready technologies that can be translated into real-world use.

The successful candidate will be tasked with implementing a number of subroutines, integral to our overall development and/or simulation efforts.

Below are some of the expected tasks.

· Conduct research and development in threat modelling, vulnerability assessment, security integration and testing of cyber-physical systems.

· Develop tools and algorithms that aid in the analysis of system vulnerabilities, cyberattacks, network traffic, and threat hunting.

· Penetration testing, threat hunting, and vulnerability assessment of cyber-physical systems and critical infrastructure

· Implement machine learning based techniques for inferring system invariants from network traffic

· Developing digital twin of smart nation systems for cybersecurity evaluation and planning.

This position requires:

· Bachelor’s or Master’s degree in Computer Science/Engineering or related fields.

· Demonstrated experience in one or more general-purpose programming languages. Strong proficiency or keen interest in C/C++/Python highly preferred.

Besides, depending on tasks, one or multiple of the following skills and experience are preferred.

· Knowledge of and experience with penetrating testing methodology for cyber-physical systems using programming languages such as Python, Ruby, BASH scripting, and Lua.

· Proficiency in web application development prototyping, system integration, and security testing.

· A background or substantial interest in data structures, algorithms, computer networks, and security will be advantageous.

· A strong desire to learn about cybersecurity is essential.

· Experience in network simulator and/or model-based simulators like Matlab Simulink.

· Experience in network and system virtualization technologies is a plus.

· Strong math background.

Aliena is a leading Singapore-based space-tech company, aiming at providing high-resolution data to terrestrial businesses by enabling a fleet of imaging satellites to fly closer to the Earth using our proprietary electric propulsion engines. In January 2022 Aliena broke the record for the smallest satellite ever to launch with a Hall plasma thruster on board.

We impact lives on Earth by bringing space closer to home. We develop low power engines that enable satellites to fly closer to Earth and provide impactful high quality data to various market segments such as banking & finance, maritime, aviation, agriculture, energy, security, and defence at an affordable rate.

Our engines are mission agnostic, and while our vision is centred around the very low earth orbit, all types of missions are welcome, in any branch of pace exploration or space economy.

By joining our dynamic and visionary team, you will take part in defining the future of Earth observation and state-of-the-art low power plasma propulsion systems.

Your responsibilities

• Perform the electrical design, simulation and analysis of power electronics circuits and systems to meet technical product requirements. The main focus will be on DC-DC power converters.
• Conduct the electrical debug, test, characterization, and validation of power electronics designs.
• Optimise the Power Processing Unit design for coupling with Aliena’s family of Hall effect thrusters. Understand the interactions between power electronics and plasma devices (internal training provided).
• Cooperate with embedded system engineers to improve the Electronic Control Unit and explore the possibility of an integrated ECU-PPU.
• Support the design of laboratory experiments to test the PPU performance coupled with different Thruster Units and power rails.
• Assist in the environmental testing of PPUs and other Aliena systems (might involve travelling abroad).
• Partner with the operations team in planning for the scale production stage of the propulsion system.
• Document and share best-practices.

Qualifications

• Degree in Electrical Engineering or related technical discipline.
• Experience in PCB design and assembly including knowledge of eCAD.

Useful experiences

· Experience in modelling, simulating, and testing of power electronics through tools like PSIM, MATLAB, ORCAD/PSPICE, LTspice, etc..

· Experience in designing and solving technical problems in the area of power and analog circuit design.

If you are not ticking all of the abovementioned qualifications, don’t you worry! We are looking forward to helping you accomplish them together with us!

Ideal profile

• Motivated self sufficient individual, aiming to improve itself as well as the company
• Hands-on approach
• Out-of-the-box problem solver
• Team player

What we offer

• Market competitive compensation
• Personal office computer
• Dynamic and inclusive work environment
• Comprehensive health coverage
• Options under the Employee Stock Option Plan

***Admin note***

Only shortlisted candidates would be contacted directly by Aliena's HR for interviews and further assessment

Medical grooming centre is searching for dedicated and passionate individuals who love animals as much as we do. For those that thrive in a work environment that revolves around the care of our furry friends.

Under PNC Medical group, medical grooming centre is a new centre dedicated to solv e skin issues for furry friends.

Job Responsibilities

- Grooming and styling pets according to pet owners’ instructions or standard grooming styles.

- Identifying health issues in pets, such as ear infections, skin conditions, or tooth decay and informing pet owners of these observations.

- Clean and freshen pet hair by washing, shampooing and drying it

- Shave, trim, and style pet hair according to the owner’s preferences

- Maintain overall pet hygiene by clipping nails, brushing teeth, and cleaning ears

- Ensuring that all pets are safe during the grooming process.

- Ensure workplace safety, hygiene level, and cleanliness of the grooming area between each client

- Advise owners on at-home care tips, recommending suitable products to owners and best practices for their pets

- Required to do cleaning at & after work

Requirements:

• SKC/Equivalent Certification or At least 1 year experience (portfolio)
• Some animal handling experience is required
• Fit and able to work long days on your feet and lift animals that weigh over 25 kg
• High level of communication and empathetic in nature
• A desire to learn, or aspiration to continue your development with canine/feline behaviour and psychology
• Good video editing and photography skills ideal
• Must have good knowledge of grooming equipment and products
• Must be open to work on weekends and evenings
• A good team player & an individual who can work independently
• Comfort working with various breeds of dogs and cats, including anxious, difficult and temperamental ones

Been searching for a job that involves both nursing and grooming? This might be the job for you! Email your CV and portfolio to [email protected] now! We regret to inform that only successful candidates will be contacted

Join the Innovation at ISCE2: Seeking a Visionary and Talented Scientist

Are you ready to be a part of a dynamic, forward-thinking team to drive the future of green and sustainable technology in biomanufacturing?

ISCE2 is actively looking for a passionate Scientist with proven track record in chemical biology, biocatalysis or biotechnology research to join our multi-disciplinary team to develop next generation green and sustainable technology for the manufacturing of fine and specialty chemicals.

What Sets Us Apart:

Next-Generation Technology: Be at the forefront of innovation, utilizing advanced technologies, including automation, data science, AI and machine learning, to accelerate development.

Key responsibilities:

The successful candidate may be responsible for but not limited to:

• Design and develop biocatalytic systems or enzymes for the sustainable (bio)-production of chemicals
• Comfortable in the use of advanced technology, including AI/machine learning to help accelerate development
• Able to lead an independent study
• Analyze data and present research findings at conferences, meetings, and to stakeholders while maintaining accurate records
• Write and publish high impact papers in peer-reviewed journals, alongside preparation of technical disclosures, patent applications
• Supervise and mentor junior researchers, fostering a collaborative and supportive work environment
• Devise both exploration and industrial proposals to seek competitive funding
• Other RI and lab wide duties as assigned by the manager

Requirements:

• PhD in Chemistry, Biocatalysis, Chemical Biology, Biochemistry, Protein engineering or its equivalent
• Strong background in biocatalysis, protein engineering, chemistry, molecular biology and/or biotechnology
• More than 2 years of post-PhD experience preferred
• In depth experience with PCR, protein expression, and/or analytical techniques such as biochemical assays, spectroscopy and chromatography
• Adaptable to team-oriented goals and requirements
• Rigorous data analysis, interpretation, analytical and problem-solving skills
• Excellent oral/written communication, documentation and organization skills
• Meticulous, attention to details and organized
• Ability to prioritize responsibilities and multi-task

What We Offer:

• Innovation Culture: Immerse yourself in a culture of innovation and continuous learning.
• Professional Growth: Opportunities for project management, representation at international events, and career advancement.
• Collaborative Environment: Work alongside top-notch professionals in a collaborative and supportive setting.
• If you are ready to make a significant impact in the realm of sustainable biomanufacturing, we invite you to apply and be a part of our pioneering team at ISCE2.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Join the Innovation at ISCE2: Seeking a Visionary and Talented Scientist

Are you ready to be a part of a dynamic, forward-thinking team to drive the future of green and sustainable technology in biomanufacturing?

ISCE2 is actively looking for a passionate Scientist with proven track record in chemical biology, biocatalysis or biotechnology research to join our multi-disciplinary team to develop next generation green and sustainable technology for the manufacturing of fine and specialty chemicals.

What Sets Us Apart:

Next-Generation Technology: Be at the forefront of innovation, utilizing advanced technologies, including automation, data science, AI and machine learning, to accelerate development.

Key responsibilities:

The successful candidate may be responsible for but not limited to:

• Design and develop biocatalytic systems or enzymes for the sustainable (bio)-production of chemicals
• Comfortable in the use of advanced technology, including AI/machine learning to help accelerate development
• Able to lead an independent study
• Analyze data and present research findings at conferences, meetings, and to stakeholders while maintaining accurate records
• Write and publish high impact papers in peer-reviewed journals, alongside preparation of technical disclosures, patent applications
• Supervise and mentor junior researchers, fostering a collaborative and supportive work environment
• Devise both exploration and industrial proposals to seek competitive funding
• Other RI and lab wide duties as assigned by the manager

Requirements:

• PhD in Chemistry, Biocatalysis, Chemical Biology, Biochemistry, Protein engineering or its equivalent
• Strong background in biocatalysis, protein engineering, chemistry, molecular biology and/or biotechnology
• More than 5 years of post-PhD experience preferred
• In depth experience with PCR, protein expression, and/or analytical techniques such as biochemical assays, spectroscopy and chromatography
• Adaptable to team-oriented goals and requirements
• Rigorous data analysis, interpretation, analytical and problem-solving skills
• Excellent oral/written communication, documentation and organization skills
• Meticulous, attention to details and organized
• Ability to prioritize responsibilities and multi-task

What We Offer:

• Innovation Culture: Immerse yourself in a culture of innovation and continuous learning.
• Professional Growth: Opportunities for project management, representation at international events, and career advancement.
• Collaborative Environment: Work alongside top-notch professionals in a collaborative and supportive setting.
• If you are ready to make a significant impact in the realm of sustainable biomanufacturing, we invite you to apply and be a part of our pioneering team at ISCE2.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job description:

• Responsible for day to day Operations and administration on network & security infrastructure
• Responsible for firewall security appliances, routers and switches particularly trouble shooting and/or debugging network related problems.
• Perform support, configuration and maintenance of network equipment and network operating System
• Perform basic Linux administration and able to configure, manage network application.
• Handle network projects and identify any missing components in the infrastructure and support future demands on the network infrastructure.
• Good Knowledge troubleshooting, problem identification, problem resolution and/or resolution recommendation activities
• Must have experience in managing of Checkpoint firewall, Extreme, HPE, Cisco, Aruba Switches.
• Work with vendors to deliver the project scope and meeting project deadlines
• Proactively monitor network performance, ensuring high network availability and smooth operations
• Involve in Network and IT audit and adhere to security compliance and governance.
• Perform evaluation, proof of concept and provide recommendations

Job Requirements:

• A Bachelor’s degree in Computer Science, Computer Engineering, IT or equivalent
• Must be CCNA certified, CCNP preferred
• Working knowledge plus at least a year’s experience in networking technologies like Structured Cabling, WAN, LAN, VPN, Network Security, Wireless, iBGP, eBGP, Routing Protocol, OSFP etc.
• Hands on experience in implementing, administering and troubleshooting network infrastructure devices, including cisco, Brocade routers, Dell enterprise and cisco switches, network firewall, IPS, SIEM, vulnerability assessment and monitoring tools
• Experience in IPv6 and Data Centre operations an advantage
• Familiarity with Linux (as a user and system), container technology, security concepts, project management and ITIL processes will be added bonuses
• Familiar with Dense wavelength division multiplexing DWDM) is a plus.
• Familiar with basic Linux administration is a plus.
• Minimum 2 years of relevant experience

Job Description & Responsibilities

The candidate will be attached to the Digital Health Solutions department. He/she will support the project manager in project and operational matters in project execution. In this position, the candidate will gain exposure to the product development life cycle of software as medical device (SaMD), and breadth of medical device projects based on various technologies and disease states.

The job activities include but not limited to the list below:

• Drafting and negotiation of project agreements
• Technology feasibility analysis and business model evaluation
• Generating reports and scenarios supporting project business case
• Compiling and communicating project progress reports with management and collaborators
• Supporting the Project manager in project execution and timeline management
• Support project development activities
• Taking detailed notes and liaising with Managers, Supervisors, and other senior staff.
• Fulfilling any requirements and meeting goals set out at the start of the program.

Job Requirements (Qualification and softskills)

A minimum bachelor’s degree in Biomedical Engineering, Computer Science/Information Technology, Engineering or equivalent.

Technical Skills

• Some Hands-on experience software engineering and coding
• Some knowledge in ML and or Software development
• Some knowledge of cybersecurity and cloud architectures is a plus
• Knowledge of biomedical field is a plusSoft Skills
• Strong communication skills
• Ability to work in cross functional teams
• Well organized, able to multi-task
• Good interpersonal skills, ability to work with a dynamic and demanding environmentAbilities/Aptitudes
• Highly motivated and results driven
• Proactive and takes ownership of the projects
• Adaptable to work exigencies
• Works well as part of a team, yet able to work independentlyPrioritizes assigned tasks and manages time accordingly
• Self-learner

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job description:

• Responsible for day to day Operations and administration on network & security infrastructure
• Responsible for firewall security appliances, routers and switches particularly trouble shooting and/or debugging network related problems.
• Perform support, configuration and maintenance of network equipment and network operating System
• Perform basic Linux administration and able to configure, manage network application.
• Handle network projects and identify any missing components in the infrastructure and support future demands on the network infrastructure.
• Good Knowledge troubleshooting, problem identification, problem resolution and/or resolution recommendation activities
• Must have experience in managing of Checkpoint firewall, Extreme, HPE, Cisco, Aruba Switches.
• Work with vendors to deliver the project scope and meeting project deadlines
• Proactively monitor network performance, ensuring high network availability and smooth operations
• Involve in Network and IT audit and adhere to security compliance and governance.
• Perform evaluation, proof of concept and provide recommendations

Job Requirements:

• A Bachelor’s degree in Computer Science, Computer Engineering, IT or equivalent
• Must be CCNA certified, CCNP preferred
• Working knowledge plus at least a year’s experience in networking technologies like Structured Cabling, WAN, LAN, VPN, Network Security, Wireless, iBGP, eBGP, Routing Protocol, OSFP etc.
• Hands on experience in implementing, administering and troubleshooting network infrastructure devices, including cisco, Brocade routers, Dell enterprise and cisco switches, network firewall, IPS, SIEM, vulnerability assessment and monitoring tools
• Experience in IPv6 and Data Centre operations an advantage
• Familiarity with Linux (as a user and system), container technology, security concepts, project management and ITIL processes will be added bonuses
• Familiar with Dense wavelength division multiplexing DWDM) is a plus.
• Familiar with basic Linux administration is a plus.
• Minimum 2 years of relevant experience

The Digital Health Accelerator (DHA) is led by A*STAR, Ministry of Health (MOH) Singapore, SingHealth, National Healthcare Group (NHG), and National University Health System (NUHS). DHA supports innovators in driving adoption and scaling of market ready or near-market ready digital health solutions. DHA is hosted by Singapore's Diagnostics Development Hub (DxD Hub).

The DHA integration engineer is responsible for planning and developing workflow and technical interfaces between healthcare IT systems. S/he will work with DHA Project Managers, Solution Architects, health systems and companies to accomplish this objective. S/he may also be called upon to advise other developers on integration standards.

Description

• Plan, design, implement and test integration between new and in-development digital health solutions and other healthcare information systems

Qualifications

• Bachelor's degree in Computer Science, Computer Engineering, M.I.S. or related field

• 2+ years’ experience in HCIT integration using established and contemporary interoperability standards (e.g. HL7, SMRT, FHIR)

• Experience with popular healthcare integration engines with ability to recommend and/or select different integration approaches depending on the desired outcomes for the system

• Strong communication skills and ability to work with project stakeholders from different backgrounds (e.g. technical, clinical)

• Experience integrating with Singapore public hospital technical stack and working with IHIS are a plus

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Digital Health Accelerator (DHA) is led by A*STAR, Ministry of Health (MOH) Singapore, SingHealth, National Healthcare Group (NHG), and National University Health System (NUHS). DHA supports innovators in driving adoption and scaling of market ready or near-market ready digital health solutions. DHA is hosted by Singapore's Diagnostics Development Hub (DxD Hub).

The DHA integration engineer is responsible for planning and developing workflow and technical interfaces between healthcare IT systems. S/he will work with DHA Project Managers, Solution Architects, health systems and companies to accomplish this objective. S/he may also be called upon to advise other developers on integration standards.

Description

• Plan, design, implement and test integration between new and in-development digital health solutions and other healthcare information systems

Qualifications

• Bachelor's degree in Computer Science, Computer Engineering, M.I.S. or related field

• 2+ years’ experience in HCIT integration using established and contemporary interoperability standards (e.g. HL7, SMRT, FHIR)

• Experience with popular healthcare integration engines with ability to recommend and/or select different integration approaches depending on the desired outcomes for the system

• Strong communication skills and ability to work with project stakeholders from different backgrounds (e.g. technical, clinical)

• Experience integrating with Singapore public hospital technical stack and working with IHIS are a plus

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.