Total 21,587 site engineer job vacancies in Engineering category in Singapore

Principal Piping Engineer

• 5 Working Days
• 830am - 530pm
• $8000 - $9300
• Labrador Park

Job Summary:

As a Principal Piping Engineer, the candidate shall act as key person of the project as designated by Piping Department Manager and performs the function inherent to this position. Responsible for the preparation of major piping layout, MTO sketch, and 3D CAD model review on piping system, equipment and structure, and interference detection. Has the technical responsibility for interpreting and evaluating stress/ vibration result, for reviewing piping layout, and piping information. The candidate will also be responsible for reviewing piping engineering progress against approved schedule, for evaluating changes and taking corrective action when required, for providing technical guidance, and for organizing, executing and coordinating these responsibilities to ensure timely completion and meets project schedule and budget.

Duties & Responsibilities:

• To study ITB, project and design basis such as scope of work, overall project schedule, basic design data, client specification, client standard drawings, existing drawings, and plot plan.
• To assist in planning and organizing piping engineering activities and manpower requirement for the project.
• To assist in developing piping engineering and design schedule, manpower requirements, manhour distribution and execution plan based on the scope of work and approved budget manhour/schedule.
• To coordinate piping design and engineering effort with other area Lead Engineers and disciplines of the project.
• To prepare piping information list and layout and document list following standard procedure created for the project.
• To prepare piping general specification inclusive of specification for piping arrangement, piping support standards.
• To interpret and evaluate stress/vibration analysis result and provides necessary recommendation on resolving the method of analysis.
• To develop conceptual routing, piping layout and piping information of major critical equipment of the project such as tower/column, airfin coolers, heaters, compressors and reactors, preferably in 3D CAD format.
• To check and review all work such as piping layout and information prepared by Engineers, 3D model, MTO, BQ and other deliverables of the project for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
• To check and review piping material specification (line classes), specifications/requisitions for bulk and special piping components, vendor quotation evaluations and verifications of vendor documents and piping material take-off prepared by engineers for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
• To provide field engineering support/advice towards piping installation and testing at construction site.
• To perform the function inherent to Piping Key Person as designated by Piping Department Manager.
• To evaluate the performance of and provide counseling and guidance to members of the project.
• To identify and recommend training programs including cross training of piping staff within the team in collaboration with the Department Manager.
• To prepare lesson learned upon completion of the project and recommend preventive actions to avoid recurrence on future projects to Piping Design Supervisor.
• To perform other tasks that may be assigned by the Department Manager.
• To carry out engineering support work during the construction phase of the project

Requirements:

Education:

• Bachelor Degree of any four years BS Engineering course preferably Mechanical Engineering or at least fifteen (15) years related experience and/or training; or equivalent combination of education and experience.
• Minimum of twelve (12) years in the field of piping design involving detailed design, stress evaluation, production work, 3D model review, and construction engineering support, five (5) years of which in a supervisory capacity.

Skill Requirements:

• Good Knowledge of AutoCAD.
• Basic knowledge of 3D Model review through Naviswork or SPR.
• Interpretation of stress/vibration analysis report.
• Ability to read, analyze, and interpret common technical information, contracts reports and instructions.
• Ability to respond to common inquiries or complaints from clients and ability to write effective minutes of meeting and other related business communications.
• Strong leadership qualities and analytical and reasoning abilities

Interested applicants can send your resume to Whatsapp 83208165 (Jennifer) and allow our consultant to match with our clients.

We regret to inform that only shortlisted candidates will be notified! All applications will be handled with strict confidentially.

Jennifer Tay Swee Shan

Reg No: R22111564 | EA No: 21C0845

Recruit Now Singapore Pte Ltd

• Provide L2 Desktop support
• Supporting and communicating with end users regarding their IT issues
• Perform troubleshooting for client platform related problems.
• Respond promptly to incident, investigate & provide temporary &/or permanent resolution of incidents escalated. Provide timely status updates to relevant parties.
• Involved in heavy lifting
• Perform service request related to client platforms.
• Monitor the agreed service level, document & maintain the configuration of the systems; provide regular reporting to relevant parties.

To Apply:

Interested candidates, please click on the following link to begin your job search journey and submit your curriculum vitae (CV) directly through the official PERSOLKELLY job application platform - GO. <https://go.persolkelly.com/job/apply/5090>

We regret to inform that only shortlisted candidates will be notified.

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tac and the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394• Reg No : R22110511 | Teh Chee Hoong

Located at Chai Chee

Precision industry (Clean room)

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to become Leader

Requirements

• Diploma in Precision Engineering
• No experience required

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

About GlobalFoundries

GlobalFoundries is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world’s most inspired technology companies with a global manufacturing footprint spanning three continents, GlobalFoundries makes possible the technologies and systems that transform industries and give customers the power to shape their markets for more information, visit www.globalfoundries.com

Introduction
In this role you will assist engineers in device development. Responsible to optimize and develop device and processes to lead to device characterization.

Your Job

• Handling high precision equipment to perform sophisticated semiconductor device characterization involving MOSFET, BJT, Sensor & non-volatile memory devices.
• Coding for test automation
• Development of testing capability
• Management of testing tools, including spares, calibration, and repairs

Required Qualifications:

• Diploma in Electrical Engineering or equivalent
• Field of specialization: Microelectronics (preferred)
• 3 yrs of relevant experience in similar role

Other Essential Attributes

• Familiar with Microsoft Excel (preferably including macros) and Word
• Conscientious, accurate and organized
• Good communication and interpersonal skills

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

To ensure that we maintain a safe and healthy workplace for our GlobalFoundries employees, please note that offered candidates who have applied for jobs in Singapore will have to be fully vaccinated prior to their targeted start date. For new hires, the appointment is contingent upon the provision of a copy of their COVID-19 vaccination document, subject to any written request for medical or religious accommodation.

RightShip, as a leading maritime safety and environmental expert, aims to expand its influence in safety, sustainability, and crew welfare using cutting-edge innovation, digitalization, data, and customer-focused solutions. We are seeking a motivated and hands-on AI Engineer who can join our team of highly skilled engineers.

As an AI Engineer, you will be responsible for developing and implementing LLM and GPT-based applications, fine-tuning LLMs, and developing in-house RAG frameworks to handle unstructured data. You will evaluate these frameworks and enhance the AI capabilities across the company.

This role involves working closely with senior business stakeholders, coordinating with cloud infrastructure teams, and leading GenAI projects. You will also play a key role in building the GenAI infrastructure on the cloud and streamlining AI application deployment across the organization.

Major Responsibilities

· Develop and implement LLM and GPT-based applications.

· Fine-tune LLM models to improve performance.

· Develop and maintain in-house RAG frameworks for handling unstructured data.

· Evaluate RAG frameworks and enhance AI capabilities across the organization.

· Present LLM-based solutions to senior business stakeholders across APAC.

· Build and maintain GenAI infrastructure on the cloud, with a strong focus on Azure.

· Streamline AI application deployment across the organization.

· Stay up-to-date with the latest trends and best practices.

· Conduct experiments and measure the effectiveness of AI models and applications.

· Implement vectorization and embedding techniques for various AI applications.

· Work on multi-modal AI projects and integrate multi-modal capabilities into existing frameworks.

Qualifications, Skills & Experience

· Bachelor’s degree in Computer Science, Data Science, or a related field.

· 2 years+ of experience as a Data Scientist or ML Engineer.

· Hands-on experience with GenAI/LLM projects.

· Proficiency with GPT models, RAG, Langchain, Langgraph, and AzureML.

· Strong experience with Python and related libraries (e.g., TensorFlow, PyTorch).

· Understanding and practical knowledge of vectorization and embedding techniques.

· Experience with multi-modal AI technologies.

· Experience with Windows Azure for AI and machine learning deployments.

· Excellent problem-solving, analytical, and communication skills.

· Active GitHub contributor is highly appreciated.

If you are keen to apply for this role, please submit an application at https://boards.eu.greenhouse.io/rightship/jobs/4368261101.

We look forward to hearing from you!

• Assistance for both existing and new Main Distribution Frame/ Intermediate Distribution Frame rooms.
• Oversight of daily operations in Main Distribution Frame/ Intermediate Distribution Frame rooms, crucial for maintaining overall uptime, performance, and capacity.
• Identify and resolve hardware issues, providing comprehensive reports to management/administrators.

Requirements:

• A+, Server+, Network+, and ITIL/CCNA Certified
• Degree in Information Technology/Computer Science or equivalent.
• At least 2 years of hands-on Windows, UNIX/LINUX, and IP networking experience in Semiconductor industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Reg No. R21100996

Job Description

• Industry/ Organization Type: Engineering/Manufacturing
• Position Title: Mechanical Design Engineer/Hydraulic Systems Engineer
• Working Location: Tuas
• Working Hours: 5.5 days’ work (Mon – Fri: 8 am to 5 pm, every alternate Saturday 8 am to 5 pm)
• Salary Package: Up to $3500 + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Develop designs for a variety of mechanical structures and hydraulic systems.
• Analyze and interpret mechanical and hydraulic design schematics.
• Ensure individual tasks are completed efficiently and on schedule.
• Collaborate effectively with Sales, Projects, and Operations teams.
• Follow ISO 9001 standards for design and processes, constantly seeking quality improvement.
• Undertake additional tasks as directed by management.

APPLY NOW!!!

• Degree/Diploma in Mechanical Engineering / Pipe Engineering.
• Minimum of 3 years of experience in a relevant field.
• Proficiency in hydraulic systems and AutoCAD 2D & 3D design software.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66202 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Precision Manufacturing
• Position Title: Lead Engineer (Engineering Design department)
• Working Location: Zhuhai, China
• Working Hours: 5 Days, Mon-Fri (8 am-5.30 pm)
• Salary Package: Basic Salary (Up to￥30K) + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Coordinate and align the Engineering teams and resources with the objective of “Design for Manufacturing” to achieve product leadership in the related industry.
• Understand, communicate, and manage the core needs of customers’ design and their requirements.
• Offer cooperation and support on Engineering needs as required by other departments.
• Operate as a team player with the ability to collaborate with other Department Heads in achieving corporate objectives.
• Lead engineering initiatives to ensure product designs are optimized for manufacturing and industry leadership.

APPLY NOW!!!

• Degree in Mechanical Engineering or its equivalent.
• Minimum 10 years of relevant working experience in the related industry.
• Excellent communicator with strong organizing and leadership skills.
• Knowledgeable in material substrates such as elastomer (Silicone rubber), plastics and metal.
• Hands-on experience with Pro-E Creo and Unigraphics (NX)/ AutoCAD software.
• Exposure to managing Product Development of component parts relating to Silicone Rubber, Plastics and Metal (any 2 out of 3 required substrates is acceptable) with client’s 2D/ 3D drawings.
• Possess some secondary process and tooling knowledge.
• Good rapport in interfacing and negotiating with local and global customers on Product and Engineering Development.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to anraduscn.researcher01(at)gmail.com. Please indicate #67118 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Engineering (Marine Industry)
• Position Title: Mechanical Engineer
• Working Location: Gul Circle
• Working Hours: 5 days (Mon to Thurs 8 am to 6 pm, Fri 8 am to 5 pm)
• Salary Package: Basic Salary up to $5,000 + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Follow up on projects from start to finish, including quotation, on-site work, invoicing, and service report.
• Lead technician teams through projects.
• Independently execute engine repairs and overhauls on board and on site.
• Dismantle, repair, replace, and reassemble mechanical parts.
• Troubleshoot and recommend repair solutions for machinery breakdowns.
• Conduct daily toolbox meetings with teams, ensuring safe work practices.
• Complete repairs, maintenance, and overhauls on time.
• Deliver high-quality services to satisfy customers.
• Prepare quotations for new inquiries and manage job costs within budget.
• Prepare service reports after project completion.
• Plan job methods and work schedules.
• Communicate with customers to ensure smooth project completion.
• Coordinate with local or overseas agents for job deployment and preparation.

APPLY NOW!!!

• Diploma or Degree in Marine/Mechanical Engineering or equivalent
• At least 3 years of ship repair experience in Singapore
• Able to work with tight schedules to accommodate ship arrival times
• Willing to perform hands-on mechanical repairs, installations, and removals
• Willing to work on-site, on board vessels, and in workshops with occasional irregular hours

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67187 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Electrical Engineer
• Working Location: Central
• Working Hours: 5 days (Monday to Friday 9 AM – 6 PM)
• Salary Package: Basic Salary up to $4,000 + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Design, develop, and test electrical systems and components for various projects.
• Prepare and interpret electrical schematics, blueprints, and technical specifications.
• Collaborate with cross-functional teams, including project managers, mechanical engineers, and contractors, to ensure project goals are met.
• Perform calculations to ensure safe and efficient electrical system designs.
• Prepare and maintain documentation such as design specifications, project plans, and reports.
• Ensure all electrical engineering projects comply with relevant industry standards and regulations.
• Identify and resolve technical issues promptly to prevent project delays.
• Conduct regular inspections and testing of electrical systems to ensure optimal performance and safety.
• Participate in continuous improvement initiatives to enhance project efficiency and quality.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• NITEC/Diploma in Electrical Engineering or equivalent
• Minimum 1 year of working experience in an Electrical Engineering role

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #67299 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Assistant Mechanical Engineer (Assembly)
• Working Location: Woodlands
• Working Hours: 5 days (Monday to Friday, 8.30 am – 5.30 pm)
• Salary Package: Basic up to $3500 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Assemble, debug, and test-run customized modular machines.
• Handle the commissioning of these machines.
• Provide technical support at customer locations to ensure proper equipment operation.
• Implement design improvements to simplify designs, reduce parts, and use cost-effective alternatives, while maintaining or enhancing product performance.
• Procure or assist in procuring necessary items to perform the above duties effectively.
• Write and maintain all required documentation, including work and assembly instructions, as well as manufacturing and test procedures.

APPLY NOW!!!

• Nitec, Higher Nitec, or Diploma in Mechanical Engineering with 2 to 3 years of relevant industry experience.
• Knowledge of industrial automation, jigs, fixture design, FMEA, SPC, and CAD as well as experience in machine design are added advantages
• Ability to work independently with minimal supervision.
• Willingness to travel as required.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #67302 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

• Ensuring Compliance with Regulatory StandardsEnsure all mechanical equipment and systems comply with FDA, cGMP, and other relevant regulatory standards.
  Prepare and maintain accurate documentation for regulatory audits and inspections.
• Conducting Risk-Based InspectionsDevelop and implement risk-based inspection (RBI) programs to prioritize inspection activities based on equipment criticality and risk levels.
  Perform regular inspections and assessments of mechanical systems to identify potential risks and ensure operational reliability.
• Preventive and Predictive MaintenanceDesign and manage preventive maintenance programs to minimize equipment downtime and extend the lifespan of mechanical systems.
  Utilize predictive maintenance techniques, such as vibration analysis and thermography, to detect early signs of equipment failure.
• Failure Analysis and Root Cause AnalysisConduct detailed failure modes and effects analysis (FMEA) to identify potential failure points and develop mitigation strategies.
  Perform root cause analysis (RCA) on mechanical failures to determine underlying causes and recommend corrective actions.
• Reliability Centered MaintenanceCollaborate with cross-functional teams to conduct reliability-centered maintenance studies.
  Facilitate the successful implementation of reliability-centered maintenance actions.
• Technical Documentation and ReportingPrepare comprehensive technical reports, including inspection findings, maintenance activities, and failure analysis results.
  Maintain accurate and up-to-date documentation of all mechanical integrity activities for internal and external audits.
• Continuous Improvement InitiativesDrive continuous improvement initiatives to enhance the reliability and efficiency of mechanical systems.
  Implement best practices and industry standards to ensure the highest level of mechanical integrity.
• Team Collaboration and LeadershipWork closely with cross-functional teams to ensure effective communication and collaboration.
  Provide technical guidance and training to junior engineers and maintenance personnel.
• Safety and ComplianceEnsure all mechanical integrity activities adhere to safety protocols and procedures to prevent unforeseen incidents.
  Participate in the development and implementation of safety programs and initiatives.
• Asset ManagementDevelop and implement strategies for the effective management of mechanical assets to maximize their value and performance.
  Apply risk-based methodologies to prioritize asset management activities based on the criticality and risk associated with each asset.
• Budgeting and Cost ControlDevelop and manage budgets for mechanical integrity activities, including maintenance and inspection programs.
  Identify cost-saving opportunities and implement measures to control and reduce maintenance expenditures.
• Other TasksPerform any additional tasks as assigned by your supervisor.

Requirement

• Min. Bachelor’s degree/ Diploma in Mechanical Engineering or related field.
• Min. 3 to 6 years of relevant work experience in pharmaceutical/ biological/ chemical/ oil & gas industries
• Min. 3 years of mechanical integrity experience driving Asset Management and equipment performance
• Has Technical knowledge coupled with hands-on experience in maintenance of processing equipment
• Knowledge of CMMS, Reliability, and proficiency in MS Office products (Excel, Outlook, PowerPoint, Word, Project).
• Knowledge on vibration analysis, RCA and RBI

If you meet the requirements of this role, please email a detailed resume to [email protected] or telegram @alexgohhl

Alex Goh Hock Leong

(CEI.No: R1763413 l Recruit Express Pte Ltd (Healthcare & Life Science) | 99C4599)

Job Responsibilities

• Perform C/C++ software programming in embedded Linux system.
• Manage software evaluation and test.
• Write test plans and reports.
• Write driver for devices under embedded Linux OS
• To work on network / communication software coding.
• Software integration and report.

Job Requirement

• 3 Years’ experience electronic system design
• Knowledge in Linux OS , Python, Verilog, Synopsys
• Knowledge in Embedded system and Network communication
• Good skill in C/C++ programming
• Able to co-operate with system designer and hardware engineer.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

We are looking for a DevOps Engineer with strong knowledge in cloud technologies to work on large scale nation-wide projects.

• 5 days work week (Mon - Fri).
• Attractive remuneration package.
• Hybrid work arrangement.

Responsibilities:

• Manage the development of the internal engineering productivity tools and environments.
• Providing DevOps architecture implementation and operational support.
• Manage processes, automation, best practices, documentation.
• Development and operation of continuous integration and deployment pipelines.
• Monitoring automation to effectively detect/predict/prevent issues in the environment and code base.
• Hands-on coding and mentoring, usually in a pair programming environment.

Requirements:

• Degree or Diploma in Computer Science/Engineering, Information Technology, Communications or other related disciplines.
• Strong knowledge and experience in Devops automation, containerisation and orchestration using tools like Kubernetes, Terraform, Ansible and Docker.
• Strong scripting skills e.g. Python, Bash, JavaScript.
• Cloud computing deployment and management experience - AWS.

Interested candidates may apply via email to [email protected] (indicating Job ID J46395vfor faster processing). All job applications will be processed with strict confidence and only shortlisted candidates will be contacted.

Lee Wen Ying (Mattias) - R23112909

ScienTec Consulting Pte Ltd - 11C5781

Position Summary :

We are hiring a lead engineer for the software development of healthcare application platform. The potential candidate will be involved in the development and solutioning for the transformation of Singapore Healthcare IT landscape. The candidate will be working with a team of dedicated & committed engineers to deliver the next generation healthcare digital experience across whole of Singapore

Roles and responsibilities

• Translate business requirements into technical architectures & detail design, including resilient integration with external systems

• Develop solutions in hybrid cloud environment

• Design robust application that complies with IT Policies

• Hands-on development and mentoring of junior team member

• Work closely with DevOps engineer for Release management

Requirements

• Bachelor's Degree, Post Graduate Diploma, Professional Degree in Computer Science, Information Technology.

• 8+ years of relevant work experience in software product development.

• Experience developing applications using native cloud service offer by AWS or Azure

• Experience with Containers and Orchestration such as Kubernetes/OpenShift

• Experience in design and implementation of REST API, and ensure the API is compliant to healthcare industry standards HL7 FHIR

• Experience in Microservice architecture design and implementation

• Hands-on development experience for Backend application (C# .Net core)

• Knowledge and experience in frontend development (e.g. Reactjs) will be advantageous

• Sound knowledge and experience in application design patterns

• Experience in Azure DevOps or equivalent CI/CD

If you are interested in this role and would like to discuss the opportunity further please click apply now or email Renee Feng at [email protected] for more information.

Only shortlisted candidates will be responded to, therefore if you do not receive a reply within 14 days please accept this as notification that you have not been shortlisted.

Morgan McKinley Talent Solutions

Morgan McKinley Pte Ltd EA Licence No: 11C5502

EAP Registration No: R23111942

EAP Name: Feng Ye

• Design, Deploy and Implement large-scale network video surveillance and license plate recognition system solutions.
• Provide network infra support to the project team and presales solutions.
• Provide Level 2/3 technical support to the maintenance team
• Conduct project meetings, track and report progress and produce technical documents such T&C plan/report and O&M plan/report.
• Work closely with the project manager and ICIT team to conduct System Testing and Commissioning.
• Monitor and manage multiple system vendors.
• Lead, validate/evaluated in the technical assessment and delivery of specific technical solutions to meet the technical requirements and specifications
• Participate in the project implementation and coordinate new installations, designs, test and migrations for technology solutions
• Work with diverse teams to facilitate solutions and deliver project milestones on time.

Responsibilities:

1) Execute pre-test preparation tasks, including:

• Interpret DWO, its sample descriptions, its reference codes, the standard test methods requested, deviations from standard test method (if any) and acceptance criteria;
• Prepare draft reports / raw data sheets to Technicians;
• Cascade the instructions to the Technicians via draft reports / written instructions / Technique Sheets

2) Engage customers to build & maintain good relationships with customers, including:

• Understand customers' testing objectives;
• Advise customers if the acceptance criteria are reasonable;
• Advise customers on how to resolve issues with their processes.

3) Familarise and understand the tools used for the maintenance of quality in the laboratory:

• Participate in the preventive maintenance of departmental test equipment;
• Participate in the periodic monitoring and standardization/verification of departmental test equipment;
• Participate in the calibration of departmental test equipment.

4) Under heavy load, assist with the execution of tests, including:

• Carry out tests according to the written procedures;
• Provide adequate housekeeping while carrying out tests;
• Record raw data into worksheets / draft reports;
• Transcribe test results to official test reports;
• Recognise & escalate potential invalid test results;
• Assess & recommend test validity to the senior.

Job Requirements:

• Degree in Mechanical Engineering or Materials Science or related Science Field
• 1 or 2 years of working experience in Manufacturing and QA/QC industries would be an advantage, i.e. industrial attachment, previous job
• Knowledge of ISO 17025 is an added advantage but not compulsory
• Able to multi-task and highly proficient at work.
• Able to work independently with minimum supervision
• Customer-oriented and willing to go the extra mile

Job Summary:

• Salary $2,800 - $3,000
• 5 days Work Week: Mon – Fri; 8:30am – 5:30pm
• One Sat a month: 8am – 12noon
• Location: Pioneer
• VB + PB

Job Responsibilities:

• To carry out engine repair work, engine testing, engine commissioning or any troubleshooting works for power generation engines (Land & Marine) & Main propulsion engines.
• To carry out other Mechanical repair & troubleshooting works such as MHI Deck crane, Mooring Winches, Kamome Propeller & Thruster, Kawasaki Thruster.
• To provide a service report with necessary recommendations & findings.
• To provide technical support for site engineers whenever necessary.
• To provide technical support to customers whenever necessary.

Additional Information:

• Diploma/Degree in Mechanical Engineering; Fresh Graduates are welcomed
• Can read & understand basic Mechanical diagrams
• Able to travel (Anchorage/Overseas) by flight or by sailing with the vessel.
• Able to work outdoors & onboard vessels and stations overseas.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Ong Xinyu Charmaine
Registration Number: R24122875
EA Licence No: 06C2859 (MCI Career Services Pte Ltd)

Company’s Profile
Our client is a renowned architectural and interior development firm with strong industry alliances and exceptional service quality.

Responsibilities

• Possess expertise in the mechanical and electrical systems essential for building infrastructure.
• Assist the project manager in overseeing mechanical and electrical components.
• Proficient in AutoCAD for the creation of shop and as-built drawings.
• Effectively engage with all stakeholders in construction projects.

Requirements

• Experience in M&E works

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

What you'll do:

As a Windows Engineer, you will play a crucial role in maintaining the overall health and stability of the IT Infrastructure. You will be responsible for managing a wide spectrum of responsibilities, from providing BAU support to developing best practices and managing knowledge within the team. Your expertise in Windows Services will be invaluable in driving service improvements across the organisation and delivering root causes for any high severity issues. With your keen eye for identifying potential risks in technology changes, you will help ensure the smooth operation of enterprise systems.

• Provide BAU support and act as the last level of escalation point for all production support activities within the Infrastructure team
• Work effectively with technical peers such as architects, peer experts and project teams on technology road maps and projects
• Develop best practices, manage knowledge and ensure necessary trainings are imparted to the team wherever applicable
• Manage service improvements for all Windows services supported throughout the organization
• Drive and deliver root cause for any high severity issue
• Review technology changes to identify potential risks
• Maintain programmable code outlined in technical instructions and specifications for operating systems

What you bring:

The ideal candidate for this Windows Engineer position brings a wealth of experience in managing Active Directory and relevant services. Your expertise in Active Directory, Forest and Domain Policy implementations will be key to your success in this role. You have proven ability to write scripts for ad-hoc reporting and task automation, and have experience with Role Based Access Controls, Identity and Access Management solutions and workflows. Your excellent communication, interpersonal and logical skills make you a strong team player who is customer service oriented. You thrive under pressure and are committed to solving issues.

• Minimum 8-10 years of experience in managing Active Directory, relevant Services
• Expertise in Active Directory, Forest and Domain Policy implementations
• Experience with Windows services, Windows 2008, Windows 2012, Windows 2016, Failover Cluster, Hyper-V, VMware, Altiris, VSA (Software Defined Storage) and HPE DL/BL/Synergy/Simplivity series hardware
• Ability to write scripts (PowerShell basis) to provide ad-hoc reporting and automation of tasks
• Experience with Role Based Access Controls, Identity and Access Management solutions and workflows
• Excellent communication, interpersonal and logical skills
• Customer service oriented and a strong team player
• Ability to work under pressure and a commitment to solving issues

What sets this company apart:

Our client is a leading global bank with a strong presence in Asia Pacific. They are known for their commitment to innovation and technological advancement, making them an ideal workplace for those looking to stay at the forefront of the industry. Their unique positioning allows them to offer their employees a sustainable competitive advantage on the market. They seek innovative and agile individuals who share their mindset to support ambitious and forthcoming technological challenges.

What's next:

Ready to take your career to the next level? Apply now!

Apply today by clicking on the link!

Do note that we will only be in touch if your application is shortlisted.
Robert Walters (Singapore) Pte Ltd
ROC No.: 199706961E | EA Licence No.: 03C5451
EA Registration No.: R1986634 Alphonsus Sim Zheng Wei

The QA/QC Engineer is responsible for implementing site quality assurance and quality control system, in compliance with the quality standards at site.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Engage the project team to deliver high quality works;
• Lead the QA/QC team and train the site team on Structural and Architectural trades;
• Assess site operations and procedures daily and recommend improvement actions;
• Provide insights for defects and recommend preventive measures;
• Prepare monthly reports for Management;
• Conduct Internal Quality Audits;
• Compile trade information, test reports, and formalize documentation;
• Liaise with authorities (i.e. BCA on assessment to achieve target score, LTA on inspections and compliances)
• Adhere to safety practices in the workplace.
• Obtain buy-in from project team towards quality assurance and quality control initiatives.
• Translate deep understanding of quality standards and requirements into site works.
• Manage all projects under DLP, mainly building projects
• Report regularly on status by preparing weekly and monthly summary reports
• Attend meetings and inspections with Clients and other stakeholders
• Compile and receive documentation including material certificates and test reports from Suppliers or Subcontractors
• Prepare, review and approve documentation submission to Client and other stakeholders
• Coordinate and participate in inspections
• Raise Request for Inspection for all inspection activities and maintain records
• Responsible documentation for all projects under DLP and/or warranty
• Assist in QHSE inspections or audits across all sites

Qualifications and Education Requirements

• Education: Degree in Civil Engineering or construction related field
• Experience: At least 3 years of building and/or civil engineering experience.
• Experience in QA/QC and certified auditors would have an added advantage.
• Completed at least 1 building project

Technical Competencies

• Knowledge of quality requirement of BCA, industry norms and contract specifications
• Quality Management Systems certification – ISO 9000
• Knowledge in Structural and Architectural works

If you are keen to be part of our team and possess the above pre-requisites, kindly submit your detailed resume stating your current and expected salary via the APPLY NOW button below or to :

HR Department
Securitas Electronic Security Singapore Pte Ltd

Thank you for applying.

We regret that only shortlisted candidates will be notified.

To know more about us, please visit us at: www.securitas-singapore.com.

Job Description - Quality Assurance

· Review of project quality requirements, project quality plan (PQP), method statements, inspection & test plans (ITPs), and inspection checklists.

· Develop inspection and test plan (ITPs) and inspection checklists based on project works specifications.

· Assists in projects’ internal quality management system audit and quality inspection audit.

· Data collection and documentation for defects monitoring and trend analysis in measuring project quality performance and root cause investigation and analysis to improve project performance.

· Promote the best practices in project quality management to reduce the cost of poor quality and to improve work productivity.

Job Description - Quality Control

· Conduct onsite in-process inspections or periodic site/factory quality surveillance inspections.

· Monitor and verify site execution works whether the established work procedures, inspections and approved submittals are being followed accordingly.

· Identity, record and highlight to Project Manager of any identified non-conformances or potential quality issues or risks.

· Issue and monitor closure of Quality Observation Reports (QARs), Internal Non-conformance Reports (NCRs), Corrective/Preventive Action Requests (C/PARs)

· Verify the implementation of solutions and control further works or processes until the non-conformities or deficiencies have been resolved.

· Conduct internal inspection of mock-up unit, CONQUAS/QM pre-assessment and pre-handing over inspection.

· Preparation of periodic QA/QC Reports, maintenance of quality records and any necessary QA/QC documentations at project sites.

The E&I Engineer provides technical expertise (Electrical & Instrumental) for all equipment troubleshooting and maintenance support to maintenance technicians. They also need to organize, plan, direct, and support production, project (Equipment Change Control), Validation and PM (Preventive Maintenance plan) CM (Corrective Maintenance plan) activities. This role also actively supports, participates and embraces an inclusive team culture including significant interaction with Operations, Quality, Automation, Engineering, and other groups as required.

WHAT YOU WILL DO

• Provides support to maintenance manager (E&I) and maintenance technician (E&I) to complete planned work activities timely, efficiently and satisfactorily.
• Participate and lead in Quality/Safety related investigation. Ensure the deviations are fully investigated with any actions effectively implemented within agreed time frame.
• Develops standard operating procedures (SOP's), Job aids and preventative maintenance (PM's) plans. Ensure the developed instructions are compliance with regulatory requirements and company guidelines and standards.
• Provides technical oversight and support maintenance technicians with troubleshooting and diagnostic of equipment failure and determining the root cause and perform immediate corrective actions.
• Coordinates and support equipment shutdown, start-up, swing over, and equipment servicing and inspection with stakeholders. Support installation, modification, testing, servicing, commissioning, qualification activities (IQ, OQ), as well as site change control procedures or minor projects.
• Supervise and oversee Third Party Contractors, vendors and service providers.
• Participates in the improvement initiatives to enhance equipment or system efficiency, reduce energy usage and other cost saving/avoidance projects.
• Participate in SHE, Business Compliance, cGMP and all other compliance-related matters, where applicable

After one year, you will be able to handle small project and lead investigation independently.

WHAT YOU MUST HAVE

To be successful in this role, you will have:

• Bachelor’s degree or Diploma of Electrical Engineering and Instrument & Control Engineering (Preferred).
• Bachelor’s Degree in Engineering. Mechanical Engineering, Chemical Engineering or its equivalent can be also considered if the candidate demonstrates strong willing to work and learn in E&I areas.
• PUB electrician's license will be an advantage.
• Minimum 2 years relevant technical experience in the manufacturing industry, including but not limited to Process/ facilities design, equipment operation, reliability and maintenance planning, project management, problem-solving, developing and implementing technical solutions, planning and scheduling implementations, and working with multi-functional teams.
• Good working experience in Electrical & Instrumental will be an advantage.
• Ability to work independently
• Good interpersonal and communication skills

This is a career conversion programme under Workforce Singapore (WSG) and candidates must meet the following criteria and are open to the following conditions:

• Singaporeans/Singapore PRs only
• PMETs/Mid-Careerist with more than 2 years working experience
• Open to two years contract

WHAT YOU CAN EXPECT

• Limitless opportunities across various areas in Manufacturing; well-structured career path
• A state-of-the-art facility that delivers solution to its customers world-wide
• Highly engaging team that aims to innovate the future

Role

Engage the new project and be responsible for process optimization, operational support, and improvement by engineering viewpoint. Coordinate and implement for plant modification job (Mechanical, Electrical, Instrumental (including DCS), Civil work) with relevant parties including the vendors and contractors

Responsibilities

• Implement new project, regarding Energy saving.
• Creation and organization of related documents (eg. Hazop/LOPA, drawing, standard operation procedure etc.)
• Execution of on-site construction (refer to following)
• Trouble shooting of production process (Identify root cause and suggest improvement plan)
• Implement plant optimization test
• Create Study report with chemical engineering knowledge (including modeling and calculation).
• Prepare improvement plan and create related documents (Change of Control etc.)
• Check and review the drawing / P&ID
• Follow up local regulatory / government issues for Permits, License
• Check and review the construction work by vendor (included Risk assessment)
• Commissioning new facility and equipment (verification)
• Handover the new facility and equipment to Production and Maintenance department

Requirements

• Degree in Chemical Engineering preferably
• 3 years’ experience from refinery / petrochemical industry commitment for Engineering modification job and study
• Consider and study items on your own initiative and report it to your boss closely.
• Experience in modification job in a leading position.
• Good communication with all level and function within the organization.

Other Information

• Jurong Island, MNC, Japanese Petrochemical company
• Basic ranging from $4,300 - $4,800 + Allowance + 13 Month AWS + 2 to 4 Months Variable Bonus
• 5 days' work week, Monday to Friday (8.30am - 5.30pm)
• Company transport provided at Outram and Jurong East

To apply, please click on the 'APPLY NOW' button and email your detailed CV in MS Word with the following details for faster processing:

• Reasons for leaving each past & current employment

• Salary drawn for each past & current employment

• Expected Salary

• Earliest availability date

We regret that only short-listed candidates will be contacted shortly.

EA License No. | 14C7092

EA Registration No. | R1110882

EA Personnel | Lee Ming Er