Automobile Mechanic

Job brief

We are looking for a skilled Automobile Mechanic to maintain and repair vehicles. You will be responsible for troubleshooting issues and fixing them aiming to maximum reliability and functionality.

An excellent automobile mechanic has good eye-hand coordination and manual dexterity. They are well-versed in complex mechanical or electronical systems of vehicles and have excellent problem-solving abilities. They must also be good communicators to provide advice to customers.

Responsibilities

· Inspect vehicle engine and mechanical/electrical components to diagnose issues accurately

· Inspect vehicle computer and electronic systems to repair, maintain and upgrade

· Conduct routine maintenance work (replacing fluids, lubricating parts etc.) aiming to vehicle functionality and longevity

· Schedule future maintenance sessions and advise motorists on good vehicle use

· Repair or replace broken or dysfunctional parts and fix issues (e.g. leaks)

· Provide accurate estimates (cost, time, effort) for a repair or maintenance job

· Keep logs on work and issues

· Maintain equipment and tools in good condition

Requirements and skills

· Proven experience as auto mechanic

· Excellent knowledge of mechanical, electrical and electronic components of vehicles

· Working knowledge of vehicle diagnostic systems and methods

· Ability to handle various tools (e.g. pliers) and heavy equipment (e.g. lift)

· Willingness to observe all safety precautions for protections against accidents, dangerous fluids, chemicals etc.

· Excellent physical condition

· High school diploma is preferred; Certification from a vocational school or completion of apprenticeship is preferred

· Valid certification (e.g ASE) is a definite plus

Job Description & Requirements

• ASNT NDT Level III, PCN NDT Level III, Advanced NDT Specialist
• Familiarisation of ASME & API Codes & Standards
• Ability to assume full technical responsibility for clients’ NDT facilities.
• Proven experience of providing solutions to clients’ NDT inspection related problems.
• Maintain all of equipment and consumable storage in the store room to be ready for using with good conditions under acceptance criteria specific by client or international standard.
• Willingness to be flexible and multi-task as part of a team, and contribute to company objectives.
• Strongly motivated to achieve results, with a high degree of professionalism, honesty and integrity.
• Excellent organizational and time management skills, able to priorities workloads with competing deadlines.
• Good written skills to produce coursework and training materials, as well as clients’ NDT procedures, written practices, techniques and audit reports.
• Provide internal trainiand technical guidance for other inspectors
• Ensure that all personal certification is kept up to date.
• Develop and approve NDT procedures, written practices and NDT techniques to a high standard that comply with clients
• Creative skills to plan and deliver lessons in a professional, positive and engaging manner.
• Ensure adequate training and cross checking the site works, share knowledgewith team members and contribute to team development.
• To analyse work plans and projects, and as well as recommendations of every working unit; and to give advice on safety measures to the employer.
• Feedback on revised Equipment’s and software’s for improvement.
• Feedback after testing the new equipment on site for improvement.
• Extensive knowledge of own subject area with extensive industrial NDT experience holding multiple NDT method Level III certification ASNT (RT,PT,UT,MT,VT,ET) /CSWIP (PAUT/TOFD)

Preferable:

• Master's degree in NDT
• Bachelor degree in Mechanical Engineering

Job Summary: We are seeking a skilled Engineer to join our team, specializing in Quality Control and Assembly within the VCB (Vacuum Circuit Breaker) and SWG (Switchgear) division. The ideal candidate will be responsible for ensuring the quality of incoming goods, conducting tests on VCB units and 20GC GIS (Gas-Insulated Switchgear) Panels, performing assembly tasks, and maintaining calibration control for tools and machines in compliance with ISO standards.

Key Responsibilities:

• Perform incoming Quality Control (QC) procedures for VCB department and SWG division, including thorough inspection and documentation of incoming goods.
• Implement reject control processes for non-conforming products, ensuring adherence to established standards and procedures.
• Conduct testing and evaluation of VCB units and 20GC GIS Panels to ensure compliance with technical specifications and quality standards.
• Perform outgoing QC procedures for VCB units and 20GC GIS Panels, ensuring that all products meet customer requirements and regulatory standards.
• Maintain calibration control for tools and machinery used in production processes, ensuring accuracy and reliability in accordance with ISO standards.
• Undertake assembly work for VCB units and 20GC GIS Panels, following assembly instructions and blueprints with precision and attention to detail.
• Collaborate with cross-functional teams to address quality issues, implement corrective actions, and continuously improve quality processes.
• Provide technical support and expertise to colleagues and other departments as needed.

Qualifications and Skills:

• Certificate in Nitech/ Higher Nitec, Diploma or Degree holder in Electrical Engineering or related field.
• Previous experience in Quality Control and Assembly, preferably in the electrical engineering or manufacturing industry.
• Strong understanding of QC processes, testing methodologies, and ISO standards.
• Proficiency in using testing equipment and tools for QC and calibration purposes.
• Ability to interpret technical drawings, schematics, and assembly instructions.
• Problem-solving skills with the ability to analyze issues and implement solutions in a timely manner.
• Ability to work independently with minimal supervision, as well as part of a team in a fast-paced environment.
• Experience with electrical testing and inspection procedures.

Job Responsibility:

· Prepare schematic design, site installation layout, calculations, technical reports and specifications etc for automation equipment panel.

· Liaise with external consultant teams, contractors and suppliers to resolve project electrical design issues.

· Generate BOM and RFQ document.

· Communicate with contractor for automation equipment panel fabrication.

· Prepare factory acceptance test document for automation equipment panel.

· Responsible for liaising with Project Manager on automation equipment panel acceptance before ship to site.

· Provide support on site installation.

· Updating of Circuit diagram, Control device and Equipment Installation layout.

Job Requirements:

· Degree/Diploma​/Higher Nitec​ in Electrical & Electronic Engineering

· Knowledge in automation design of the control system (Hardware & Software). Experience in motor control, hardware and software designs with controls using PLCs an advantage

· Fluency in English and Chinese, both written and oral to liaise with associates

· Good analytical reasoning, theoretical approach and communication skills

· Excellent interpersonal and Communication skills

· Self-motivated and able to work independently with minimum supervision

· Hands on experience on wiring assembly and installation will be an advantage.

· Proficient in MS office and other relevant software like AutoCAD or EPLAN 8 Electric.

· Fresh graduate can be considered.

Responsibilities

• Ensure that the model aligns with the standards and goals set in BIM BEP/LAE BIM GUID and BIM project criteria
  
• Collaborate and coodinate internally or/and externally with other desciplines design changes and model changes
  
• Develop accurate construction drawings and extact data based on the descipline BIM platform
  
• Coordinate design documentation as a methodology with full utilisation of BIM software and tools
  
• Able use navisworks to present VDC
  
• Attend coordination meeting with Project Consultants and coordinate with Project member of other disciplines

• Responsible for maintaining and updating of BIM Model until as build
  
• Carry out proper procedures and preparation for drafting for the different stages of issure & authority submission of the project assigned.
  
• Production of shop-drawings and as built drawing, including BIM Models if required.
  
• Document control of submissions (Technical Data, sho-drawings, as built)
  
• Maintain records for changes and updates on drawings.
  
• Develop shop drawing according to the schedule.
  Produce/Draw/Amend/Update drawings using BIM according to specs, co-ordinate with project department
  
• Other duties assigned by the superior
  
• Ad-hoc duties assigned by the Management from time to time
  

Requirement

Minimum Diploma in M&E / Engineering from recognized institutions

• 3 years of experience in MEP drafting using 3D BIM (Autodesk Revit) and Autodesk Navisworks for commercial projects

• Well versed with strong techniques in Autocad, 3D BIM Revit in MEP and other 3D software

• Proficient in MS Suites

• Good verbal communication skills and interpersonal skills

• Strong analytical skills and ability to be an independent problem solver

• Team player with ability to multi-task in a fast-paced environment

• Highly motivated and enthusiastic

• Preferred Plumbing and Sanitary experience

Job Description & Requirements

• Ensure timely generation and issuance of NDT report on daily basis.
• The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.
• To be successful in this position, you must have the ability to demonstrate or possess:
• Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.
• Must be a PCN Level 2 or ISO Level II in the above NDT methods.
• Familiar with codes and standards.
• Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.
• Maintain a professionalism and competence at work
• Share in our purpose – to serve others, to pursue excellence, and to grow profitably,
• Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Why Patients Need You

Whether you are involved in the design and development of manufacturing processes for products or supporting maintenance and reliability, engineering is vital to making sure customers and patients have the medicines they need, when they need them. Working with our innovative engineering team, you'll help bring medicines to the world even faster by imagining what’s possible and taking action.

What You Will Achieve

Working with Pfizer’s dynamic engineering team, you will play a critical part in managing the maintenance and reliability engineering activities involving the redesign, maintenance, and repair of utilities systems, buildings, and production/non-production equipment.

Your prior work experience and ability to apply your breadth of knowledge will help you adapt the standard methods and procedures. You will help us identify required delivery and process improvements that drive increased efficiency, throughput and quality. You will arrive at decisions on which methods and procedures are the best fit for different work situations.

It is your hard work and dedication that will make Pfizer ready to achieve new milestones and help patients across the globe.

How You Will Achieve It

Accountable for:

• cGMP and EH&S compliance
• Equipment reliability and performance
• Team performance
• Perform maintenance activities according to procedures, good engineering practices and cGMP.
• Perform Preventive/Predictive Maintenance of plant equipment and facilities to ensure high reliability and availability.
• Support to develop Preventive Maintenance SOP/Procedures and tasks to maintain plant assets.
• Conduct troubleshooting and locate sources of problems by observing mechanical devices in operation, listening for problems, using measuring instruments and testing instruments for trouble shooting.
• Participate in continuous improvement initiatives and support (IRS/QAR) investigations.
• Support project construction and commissioning of plant equipment and systems through active involvement in punch listing and commissioning activities; discuss equipment improvement and modifications with Supervisor/Engineers.
• Maintain a safe and clean working environment on areas under one’s responsibility.
• Complete all assigned training on-time and also prior to work implementation.
• Contribute to team effort by accomplishing desired results/KPIs.

KPI’s include:

• Safety incident / lost time
• Equipment uptime %
• Repeated work orders

Qualifications

Must-Have

• GCE “O” level, NITEC or Diploma in Mechanical Engineering related qualifications
• Minimum 5 years of relevant experiences in pharmaceutical, chemical, or petrochemical industries for Senior position and Minimum 2 years for Junior position. Fresh graduate will be considered.

Other Job-Related Requirements:

• Knowledge of mechanical equipment operations and maintenance skill and knowledge with experience in working in a team performance matrix environment.
• Knowledge of Computer Maintenance Management System, current Good Manufacturing Practice (cGMP) and Right First-Time technique.
• Able to demonstrates clear and concise written and verbal communication.
• Knowledge in Mechanical Equipment Troubleshooting and Analysis Skills.

Work Location Assignment: On Premise

You will need:

● 4 years of React experience

● 4 years of experience with JS, preferably also TypeScript

● Good proficiency in CSS, HTML, and related web technologies

● Extensive experience writing unit and end-to-end tests

You might be an excellent fit if you have:

● Experience developing highly performant websites for serving content at scale

● Extensive SSR or SSG experience, possibly with React

● Experience with AWS services, including Lambda

● Experience maintaining CI/CD pipelines

● Some experience using Docker or Terraform

Job Description & Requirements

• Review the inspection history to summarize the integrity status of the plant equipment and piping systems.
• Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.
• Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan
• Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).
• Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.
• Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.
• Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.
• Provide recommendations and timely updates on equipment degradation problems.
• Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.
• Preparation of final inspection reports with all findings, abnormalities and recommendations.
• Ensure quality of inspected items to meet project requirements and standards.
• Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.
• Read, understand project related ITP, procedures, specification requirements.
• Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.
• Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication
• Knowledge in welding inspection

Eligibility Criteria

• Graduate Engineers with 3-6 years of relevant experience.
• Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.
• Experience in Refinery and Oil & Gas must
• Experience in QA/QC and Knowledge in Non-Destructive Testing methods.
• Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.
• Work Independently and can work in Singapore and other countries.
• Fluent Reading, Speaking and Writing in English.
• Willing to commit 24 months contract/ project completion.
• Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.
• Energetic & Result Orientated.

Responsibilities:

A. Accounts & Finance

• Perform full sets of accounts such as AR, AP, Bank Reconciliation, Accruals, Prepayments, Deposits, Journal Entries, Disbursement and others

• Prepare and monitor cash flow forecast, budgeting and forecasting

• Manage and oversee overall accounting functions of Finance and Accounts department to ensure smooth operation of the department

• Preparation of full set of Management Reports and Financial Statements for selected companies in the Group such as Statement of Financial Position, Statement of Comprehensive Income, Statement of Changes in Equity, Cash Flow Statement and disclosure notes in accordance to IFRS Standards.

• Preparation of balance sheet reconciliations, handle intercompany transactions based on the company reporting timelines

• Performance of basic financial analysis (e.g. Actual versus Prior Year / Budgets) on main P&L line items for discussion with management on a monthly basis

• Preparation of accurate and timely tax and audit submissions as well as being the main point of contact for all tax (GST, Corporate Tax, Property Tax, etc.) and statutory audit matters

• Mentor, guide and train junior staff members on accounting procedures and software usage

• Prepare and calculate for GST, ECI, and Corporate Income / Property Tax

• Oversee annual external statutory audits and provide support to ensure the audits are completed before the statutory filing deadline

• Act on corporate secretarial matters

B. Human Resource Management

• Prepare Monthly Payrolls

• Preparation and filing of Employees CPF and IR21 / IR8A

C. Administration

• Prepare and submit AGM and other secretarial duties

Job Requirements:

• Degree in Accounting, Finance or Business or ACCA Qualification

• More than 5 years of relevant working experience

• Proficiency in Pivot Table and Vlookup and other MS Office Suites

• Excellent interpersonal and communication skills

• Strong initiative and problem-solving skills, sense of ownership of his/her job

• Able to work in team or individual assignment and can work under pressure and multiple sets of priorities

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description:

• Conduct reviews and/or updates on Materials Suitability Reviews and Equipment Strategies to ensure equipment reliability.
• Review ITP, WPS, PQR, WQT, IMIR, Quality manuals and preparation of job packs, QA/QC documents relevant to plant etc.,
• Plan and keep track on SI Equipment/SRV and critical valves schedule inspection and follow the regulatory requirements.
• Plan and carry out Static equipment and piping inspection, on stream inspection, risk-based monitoring programs, base line inspection program and Total flange management QC master.
• Monitor and report on inspection program findings and recommend appropriate solutions for corrosion issues as short term and long term, to ensure safe and reliable operation of equipment.
• Investigate equipment failure and recommend cost-effective methods of repair and material selections. Capable of analysing metallurgical failures in materials.
• Develop and update piping and equipment history records for reliability study. and Maintain effective Inspection Data Management system and filing system, including periodic updates.
• Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards, and specifications.
• To contribute and assist to clear the project punch list and related QA/QC documents.
• Stewardship in preparing Inspection procedures/documents and Total Flange Management work process.

Qualifications:

• Degree in Mechanical Engineering, Materials Engineering or Diploma in Mechanical Engineering from a recognized university, preferably with at least 5-10 engineering /Maintenance/Project field experience in the chemical, rubber, oil and gas, or petrochemical plants.
• Strong written and verbal communication in English
• Familiarity with major API codes 510, 570, 576, 579, 580/581, 650 and 653. • ASME Sections VIII and IX, ASME B31.3 Especially for pressure vessel, piping and tankage will be an added advantage.
• Knowledge and ability to use computer programs such as MS Office, SAP etc.
• Knowledge and Qualified Non-Destructive Testing: UT, RT, MT, PT.
• Knowledge of materials selection, Non-Destructive Examination techniques, welding, and risk-based inspection procedures, would be an advantage.
• Independent, adaptable and takes well to challenges.
• Team player with strong drive to deliver against commitments.
• Work Experience in Projects.
• Good knowledge in analysing the HSSE requirements.

Job Description

• Supporting the Power Plant to meet the contractual, technical and commercial set-up and operation.
• Prepare the scope of works for electrical services, specifications of spare parts for the maintenance work.
• Maintain and updated all the drawings, data and maintenance record for all electrical equipment and plant utilities in Power Plant.
• Ensure the proper preventive, corrective and condition-based maintenance (including emergency situation) carried out for all electrical equipment and plant utilities in the Power Plant.
• Perform technical evaluation on external service engagement and material purchase.
• Assist in preparation of the annually maintenance budgetary cost on electrical equipment and plant utilities.
• Provide necessary guidance and advice to maintenance staff to ensure the quality maintenance is carried out as per good engineering practice.
• Ensures that subordinates are adequately trained and recommends necessary training.
• Ensure PPE are provided, and subordinates are utilizing it by executing works with all safety precautions.
• Ensure all Power Plant jobs executed are in line with statutory requirements of concerned authorities and power plant policies and procedures.

Job Requirements

• Possess a Bachelor Degree in Electrical Engineering
• At least 3 years of relevant working experience in Power Plant Maintenance ideally on a CCPP
• Involvement in technical aspects of Power Plant maintenance
• Experience in the erection, testing and commissioning, and initial start-up phases of a modern Power Plant
• Knowledge on electrical system including installation, troubleshooting, routine inspection and maintenance
• Knowledge on electromagnetic rotating equipment
• Knowledge on protection relays
• Knowledge on electrical equipment, i.e. GIS, MV/LV switchgear, transformer, generator, Automatic Voltage Regulator, Uninterruptable Power Supply, VFD, DC System-Battery and charger, HVAC, Communication System, etc
• Knowledge on control circuitry of power plant electrical system
• Knowledge in maintaining maintenance record in CMMS

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

• Model detailed pipe and electrical cable conduit/tray routing including support system, connection detail into the 3D BIM Model, taking into account obstructions using Revit software Auto desk.
• Perform clash detection and document discrepancies/ clashes to discuss in weekly basis, Produce Clash Free Coordinated model.
• Prepare the shop drawing for construction.
• Produce construction drawing such as Cast-in layout & detail drawing, Setting Out & General arrangement drawings.
• Updating IFC drawing to as-build drawing.
• Liaise with vendors on optimization of pipe routing in the 3D BIM Model.
• Produce AutoCAD Layout and section drawings from Revit files.
• Model artifacts on Revit such a pipes, pipe supports, electrical boxes and cables, etc.
• Reviewing contractors’ BIM submission are as per requirements for 3D, 4D, 5D and 6D.
• Attend BIM- co-ordination meeting and address the BIM issue and follow up the action list.
• Perform QA/QC checks of drawing and models.
• Production of isometric drawings.
• Production of 3D, 4D, 5D and 6D BIM Model.
• Exporting of Bill of Quantities from Revit file.
• Familiar with Singapore BIM guide and Singapore BIM Particular Condition by BCA and its implementation.
• Any tasks or jobs assigned by Engineering Manager/BIM Manager.
• Develop and maintain up to date Building Information Modelling (BIM) models throughout project construction period.
• Adhere to project information requirements, modelling and exchange protocols for information sharing among project stakeholders.
• Follow the drawing management system (DMS) for collect required information, filling, workflow, and process.
• Report daily activities and BIM progress.
• Apply Building Information Modelling (BIM) across the project lifecycle.

Job Requirements

• Related working experiences in thermal power plants, waste/water treatment facilities, process industries and/or mechanical handling equipment.
• Knowledge of BIM software and design software.
• In-depth working knowledge of current BIM versions.
• Perform standard BIM deliverables as per BEP which derived from Organization Information Requirement – OIR / Project Information Requirement – PIR.
• Familiar with BIM 3D, 4D, 5D, 6D deliverables and BIM implementation and management.

Job Description

• Perform as the Company nominated QC representative daily quality inspections on the various disciplines for the Company’s sub-contracted site activities: boiler welding, mechanical erection of process equipment, piping, painting, structural steel erection.
• Perform receipt inspections of goods and equipment at delivery to check completeness and to report about eventual transport damages. Monitor the storage and preservation conditions on site.
• Monitor the implementation of the approved site Inspection and Test Plans
• Verify that the quality related site activities are in accordance with the applicable codes and standards.
• Monitor and perform spot-wise inspections on all non-destructive testing on site.
• Monitor subcontractor’s work tools calibration.
• Monitor level of training and qualification of all subcontractor personnel.
• Register, follow-up and monitor handling of non-conformities.
• Monitor and review that all sub-contractor QC documentation is available, compliant and complete according to the specification and ITP and in accordance to the actual progress on site.
• Coordinate exchange of relevant QA/QC documentation to and from site subcontractors and third parties (including Notified Body).
• Ensure that all sub-contractor QC documentation is hand-over as-built and complete at pre-defined inspection milestones.
• Liaise with the Company’s relevant discipline project engineers and vendor QC inspectors about quality related matters.
• Assist to site meetings with customer, sub-contractors or vendors about quality-related matters.
• Organise and chair weekly QC site meetings with main subcontractor QC personnel. Draft meeting reports and distribute to all participants, the QC Manager, the Site Construction Manager and other stakeholders.
• Invite and accompany the customer representative and third parties (including notified body) for witness and hold point activities according ITP.
• Coordinate with and report to the Company’s Site Construction Manager on all quality and safety-related issues.

Job Requirements

• Degree/Diploma in Engineering (Mechanical, Chemical preference) or equivalent.
• A minimum of 5 years experience in QC inspection on welding, NDT and mechanical erection activities.
• A sound working knowledge of EN standards and PED for (boiler) welding, piping, coating, NDT and pressure testing. Demonstrated working experience with steam boiler erection and pressure equipment.
• Good understanding of mechanical erection activities, their possible problems and to act pro-actively to prevent them from happening.
• The ability to work in a team as part of the Company and to communicate with colleagues (on and off-site), enforce resolution by the sub-contractor and to follow-up related communication.
• Any certification related to QC activities (welding, NDT, painting/coating inspection, audit etc) is a plus.
• Willing to work in Tuas, shift and weekend.
• Preferable with local driving license.

Job Responsibilities:

§ To conduct and carry out TBM and allocate the task to supervisors and team.

§ Prepare and submit Daily, Weekly and Monthly construction report.

§ To monitor the site progress and highlight obstructions to carry out works.

§ Ensure site team perform all the activities in safe and effective manner.

§ Assist in technical studies and prepare cost estimates.

§ Assist in project schedule by studying project plan and specifications, calculating time requirements, and sequencing project elements.

§ Maintain project schedule by monitoring project progress, coordinating activities, and resolving problems.

§ Assist in project planning and scheduling.

§ Prepares project status reports by collecting, analyzing, and summarizing information and trends; recommending actions.

§ Maintains safe and clean working environment by enforcing procedures, rules, and regulations.

§ Maintains project data base, entering and backing up data.

§ Prepare the site progress photos for progress claim submission and variation works claim.

§ Execute the construction team requirements and translating them into an actionable plan by team of workers.

§ Attend daily site coordination / logistic meeting.

§ Prepare handing over document and close-out NCR’s.

Job Requirements:

1. Minimum Qualification : Diploma or Degree in Civil Engineering / Construction Management

2. Minimum Experience : 3 years related experience

Job Description:

• Reporting to the Senior Planning Manager.
• Responsible for Planning, monitoring and controlling of the Projects.
• Responsible for L4 schedule/MP Histogram/S Curves/RDC preparation.
• Responsible for the overall weekly/monthly progress report preparation and ensure that it is delivered to the Client in a timely manner.
• Review, Monitor & Analyze the project progress and KPI on weekly basis.
• Attend Client/internal meeting. Highlight Area of concern, critical path and 2 weeks look ahead plan to the project teams.
• Work closely with the procurement and logistics teams to ensure timely availability of materials and equipment.
• Identify potential risks and uncertainties that may impact project timelines and deliverables.
• Develop contingency plans and work with the project team to mitigate risks.
• Evaluate and assess the impact of any changes to the project scope, schedule or resources.
• Work with the project team to implement changes and update project plan accordingly.

Job Requirement:

• Bachelor’s Degree in Mechanical Engineering
• At least 6 years of experience as Planning Engineer with scope of work in Marine or Oil & Gas Industry
• Experienece in Primavera software, P6
• Excellent written and good communicative skills, able to interact with people of all levels and teamwork

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

1. Project coordination and supervision, ensuring efficient task delegation and team management.

2. Oversight of all site operations, with a focus on safety, quality assurance, and regulatory compliance.

3. Rigorous monitoring of project schedules and progress to meet deadlines and deliverables.

4. Attend site meeting and liase with consultants, architects, clients pertaining to site matters.

5. Overall project management and implementation.

Job Purpose:

To execute the full spectrum of human resources functions to achieve current organization’s goals and future business strategic initiatives

Educational/Professional Qualification:

Degree/Diploma in any disciplines and/or Professional Diploma in Human Resources Management

Working Experience/Exposure:

• At least 2 years of relevant experience in providing HR administration and support in full spectrum of HR in a fast-paced environment, preferably in MNCs
• Good working knowledge of Singapore Employment Act and local HR practices
• Good knowledge of Government legislations (MOM, CPF and IRAS)
• Effective communication and interpersonal skills and ability to work with all levels
• Tactful, has good EQ (emotional quotient) and AQ (adversity quotient)
• Strong administrative skills
• Ability to organise and work independently
• Attentive to details and reliable
• Independent Solution seeker
• Has sound foundation in HR processes and practices, preferably in Staffing, Compensation and Benefits, Performance Management, Employment Legislation, and Industrial Relations
• Possess integrity, “Can Do” attitude with passion and a global mindset

Job Duties and Responsibilities:

• Provide HR administrative support to HR Manager and HR Executive
• Provide full range support in HR duties including recruitment and selection, preparation of contract, orientation, employee relations, performance management, training and development, and manpower planning
• Process and generate HR monthly reports
• Manage timekeeping and attendance, providing necessary documentation to finance and payroll to support payroll functions
• Working with finance to process staff insurance and claims
• WorkDay administration – assisting with staff queries on WorkDay, maintenance of Annual Leave, No pay leave records etc
• Administer industrial attachment, internship programme
• Assist in developing, implementing and reviewing of HR processes and procedures
• Any other HR functions as assigned

Key Accountabilities

Project Invoices Review

• Review and verify all project vendor/sub-contractor invoices, ensuring claim eligibility in accordance with Purchase Order & Sub-Contract agreements and/or corporate rules, and supporting documents provided are sufficient to evidence progress, achievement of milestone and/or reimbursable claims etc. before approving for payment (or reject as appropriate)
• Be the focal point with Finance Dept and other functions related to project invoices, make clarifications on missing supporting documents, unclear/unjustified contractual provisions or claims and resolve for invoice processing
• Maintain full and complete records of invoices and cost charged to project
• Cost Allocation: Allocate cost expenditure according to WBS Code / Cost Centre to ensure correct WBS Code / Cost Centre assigned for each invoice and breakdown.
• Cashflow management: Update and maintain the project cashflow tracking/forecast sheet to ensure positive cashflow.
• Assist Cost Controller in cost analysis/reconciliation to ensure appropriate / valid cost are charged to correct budget in line with plan / phases; for example manpower analysis by ensuring project timesheet submission is in line with project budget and correct WBS code, approval by correct approver, and required documentation is in place (project mobilization/ demobilization forms), and alignment with Manpower Plan system

Technical Competencies *

· 3-5 years of relevant experience

· Advanced Microsoft Office (Excel)

· Analytical Skill

· Industry Knowledge

· Master Data knowledge

Qualifications *

· Bachelor Diploma in Accounting

Key Behaviors

· Teamwork (Communication)

· Integrity (Commitments)

· Performance (Value Creation & Goals Driven)

· Accountability (Analytical Ability)

· High sense of accuracy, detail-driven, confidentiality and time management

System Operator / Associate Engineer (Operation)

Responsibilities:

• Conduct on-site daily maintenance check for simulator.
• Carry heavy equipment for training set up.
• Operate and support simulator training independently.
• Perform basic IT troubleshooting.
• Any other duties as assigned.

Requirements:

• NTEC / Diploma in Mechatronics / Electrical / Electronics / Computer Engineering.
• IT savvy.
• Willing to perform overtime during weekday and weekend (Occasionally).
• Able to work in the west of Singapore.
• Good working attitude with ability to work independently as well as in a team.
• Only Singaporeans need apply.

Responsibilities:

• To have a role in VSAT product development team that participates in designing of LNA and Power Amplifier.
• Operating up to Ka band frequencies, the Up/Down Converter facilitates communication as part of its functionality.

Requirements:

• Bachelor’s Degree in Electronics Communication Engineering or equivalents.
• Minimum 3 years of experience in any RF systems.
• Experience in RF circuit design (LNA, PA, Up/Down Converter, Synthesizer).
• Experience in using simulation software.
• Experience in VSAT system or subsystem design.

____________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628