Total 274 communications officer job vacancies in Information Technology category in D21 Upper Bukit Timah, Clementi Park, Ulu Pandan

1. The RTO Shall supervise all civil, structural and geotechnical building works, including structural elements for architectural work, building services, electrical and mechanical (M&E), and specialist engineering works for compliance with the PUB/LTA’s requirements and other authorities’ and agencies’ requirements for permanent works and temporary works.

2. The RTO shall be independent and energetic to perform permanent shift work or late night supervision and project management work.

3. The RTO shall be competent with all necessary Ministry of Manpower WS requirements e.g. Work-At- Height (WAH), Lifting work, Permit-To-Work (PTW) etc.

4. The RTO shall possess high proficiency in MS Excel, Power-point and maintaining of proper daily work progress record.

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• To coordinate the contractor, AC, QP(D), relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structure, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

- Possess a valid RTO (Tunnel) cert by JAC of IES/ACES as QSS Singapore

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• To coordinate the contractor, AC, QP(D), relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structure, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

- Possess a valid RTO (Tunnel) cert by JAC of IES/ACES as QSS Singapore

Job Description & Requirements

• Assist on site to ensure that all works comply fully with regulatory and client's requirements
• Work closely with Professional Engineers, regulatory authorities and contractors to provide planning, design and supervision leadership not only to solve site problems, but also to ensure timely completion of the Projects
• Responsible for implementing and sustaining the site supervision quality & safety assurance system
• Carry out supervision of structural & geotechnical works by identifying any non-conformity of contractor's works on site
• Understand drawings & contract documents in carrying out the works
• Implement the site supervision quality and safety assurance system
• To carry out regular site checks on contractor & ensure compliance with health and work safety in accordance with MOM regulation
• Ensure that proper site documentation for ongoing works, site meetings, safety records, method statements, shop drawings, as built submissions etc., are well managed

Requirements

• Must be accredited as a Resident Technical Officer with BCA/IES/ACES
• Minimum 5 years of relevant experience in projects similar in nature to the projects
• Good supervisory and leadership skills
• Excellent communication skills, mathematical acumen, time management aptitude and the ability to solve complex problems
• Please apply with a comprehensive resume, stating all working experiences, current and expected salary.
• Only shortlisted candidate will be notified.

Your new company

My client (West area) is a leading provider of comprehensive utility solutions and value-enhanced energy services, delivering innovative and integrated offerings to their customers.

Your new role

Here is a summary of the role you are applying for;

Join their Control and Instrumentation team as a maintenance expert, responsible for ensuring the optimal performance of instrumentation and control systems in their power plant.

Below are some of the key responsibilities for the role;

• Executing maintenance work efficiently and effectively, with a focus on safety and regulatory compliance
• Troubleshooting and rectifying equipment failures and malfunctions
• Testing and recommissioning rectified systems and equipment
• Performing overhaul, inspection, calibration, and servicing tasks during scheduled plant outages
• Implementing modification and upgrading plans to enhance system reliability and availability
• Maintaining detailed records and reports using computer-based software (Maximo, MS Word, and MS Excel)
• Assisting Engineers and Technical Officers in maintenance work
• Supervising contractors and ensuring compliance with safety standards

What you'll need to succeed

The successful candidate, should have;

• Diploma/NITEC in Electronics Engineering
• Knowledge of Instrumentation and control systems
• 2 years of experience in the Power Plant or Oil and Gas industry (preferred)
• Self-driven and team-oriented with a positive work attitude
• Availability for standby and emergency calls
• Strong safety mindset and good workplace safety behavior
• Willingness to be part of the CERT team and participate in emergency responses

What you'll get in return

• Joining a company that is at the forefront of our industry
• Being part of a collaborative and progressive team
• Contributing to a company committed to making a positive impact on the environment and society

What you need to do now

If you believe you meet the specified requirements or know a suitable candidate, please click the link to apply. Alternatively, you may submit your application or referral directly to [email protected].

If this role isn't quite suitable for you, but you're interested in exploring new opportunities, I invite you to contact me for a confidential career consultation. I'm here to help you navigate your next career move.

EA Reg Number: R21102304 | EA License Number: 07C3924 | Company Registration No: 200609504D

Your new company

My client (West area) is a leading provider of comprehensive utility solutions and value-enhanced energy services, delivering innovative and integrated offerings to their customers.

Your new role

Here is a summary of the role you are applying for;

Join their Mechanical Maintenance team as a maintenance expert, responsible for executing maintenance works efficiently and safely to meet planned schedule requirements.

Below are some of the key responsibilities for the role;

• Performing preventive maintenance to ensure smooth operation of plant equipment and auxiliary systems
• Repairing or replacing defective components of machinery and equipment
• Assisting with contractor monitoring and maintaining asset maintenance plans
• Addressing work orders allocated by Mechanical Engineers

What you'll need to succeed

The successful candidate, should have;

• NITEC in Mechanical Engineering or equivalent
• 3 years of relevant experience in Power Plants or related industries (preferred)
• Self-driven and team-oriented with a positive work attitude
• Strong safety mindset and good workplace safety behavior
• Willingness to be part of the CERT team and participate in emergency responses

What you'll get in return

• Joining a company that is at the forefront of our industry
• Being part of a collaborative and progressive team
• Contributing to a company committed to making a positive impact on the environment and society

What you need to do now

If you believe you meet the specified requirements or know a suitable candidate, please click the link to apply. Alternatively, you may submit your application or referral directly to [email protected].

If this role isn't quite suitable for you, but you're interested in exploring new opportunities, I invite you to contact me for a confidential career consultation. I'm here to help you navigate your next career move.

EA Reg Number: R21102304 | EA License Number: 07C3924 | Company Registration No: 200609504D

Responsibilities:

1. Assist M&E Engineer, Superintending Officer Representation (SO Rep) and Resident Engineer (RE) in the supervision and quality assurance of construction works on site
2. Provide standing supervision as and when required by the M&E Engineer, SO Rep and RE
3. To ensure all installation methods and material used are in accordance with the approved drawings and specifications
4. Liaise with the Contractors/ sub-contractors and other Resident Technical Officers (RTO) in the coordination of site works
5. Highlight discrepancies, resolve site M&E issues and monitor site progress
6. Feedback site progress and irregularities to M&E Engineer, SO Rep and RE
7. Attend site meetings, site inspections, testing and commissioning
8. To check as-built drawings to tally with site installation
9. Ensure the contractors maintain work safety, cleanliness and tidiness of the site
10. Documentation of site records, ie. Inspection records, T&C records, site meetings etc.
11. Aware of the potential and actual OH&S hazards of his activities at the workplace and to highlight / communicate to the PM when he knows of any irregularities. He shall be aware of his individual OH&S obligations by ensuring that he is adequately equipped with appropriate safety gears, by observing closely to all safety rules / regulations / procedures at site and by attending all relevant site safety trainings.

Requirements

1. Diploma in Electrical/ Mechanical or Building Services Engineering from local Polytechnic or other tertiary institutions of equivalent standing
2. Minimum eight (8) years of M&E work experience as a Resident Technical Officer
3. Conversant in local construction practices, air-conditioning, electrical, fire protection, plumbing and sanitary services.
4. Good co-ordination skills
5. Good analytical ability with strong verbal and written communication skills.
6. Self-motivated, proactive and team player
7. Past work experience in healthcare/residential/institutional projects is preferred.

Key Responsibilities:
∙Coordinate with external vendors and collaborate with customers and SaaS providers to conduct IT Security Risk Assessments. Identify security threats, assess risks, and propose mitigation strategies for approval by the customer.
∙Coordinate the handling of security incidents, ensuring a timely response and resolution. Maintain a robust incident response process and documentation.
∙Manage and coordinate regular security audits, vulnerability scans, and penetration tests. Consolidate findings, ensure proper remediation, and provide feedback to stakeholders on risk mitigation efforts.
∙Maintain and update all security-related documentation, including policies, procedures, standards, and best practices. Ensure compliance with security frameworks such as ISO/IEC 27001, ISO/IEC 27018, SOC 2 Type 2, and CSA-STAR (Level 2).
∙Continuously monitor the security posture of the SaaS solution and related ICT systems. Provide regular reports on security risks and mitigation actions to stakeholders and customers.
∙Oversee the remediation of security vulnerabilities identified during security assessments, ensuring that appropriate actions are taken to address risks in a timely manner.
∙Provide clear, concise security reports and recommendations to customers, ensuring they understand the security posture of the SaaS solution and any risks or issues that need attention.
∙Take on ad-hoc security tasks as required to address emerging risks or assist with specific security projects or initiatives.

Qualifications:
∙Minimum of 3 years of experience in IT security, particularly in enterprise systems, cloud infrastructure, or SaaS environments.
∙A current professional information security certification (such as CISSP, CISM, CRISC, CGEIT, GSE) or equivalent is highly desirable.
∙In-depth knowledge of IT security management and governance, risk assessment, incident response, vulnerability assessments, penetration testing, and security audits.
∙Familiarity with international security standards and frameworks such as ISO/IEC 27001, ISO/IEC 27018, CSA-STAR, SOC 2 Type 2, NIST, and CIS.
∙Strong interpersonal, written, and verbal communication skills, with the ability to explain complex security concepts to non-technical stakeholders.
∙The position requires the candidate to be based locally.
∙Strong problem-solving skills and the ability to make decisions under pressure.
∙Proven ability to work effectively with cross-functional teams and external vendors.
∙Attention to detail and a commitment to maintaining the highest standards of security.

Job Description

• Carry out full time supervision for construction of structural works in accordance to BCA approved structural drawings in compliance to Building and Control Act and regulations
• Check that requirements of specifications in regards to materials and workmanship are complied with the project specifications by the Builders. Ensure high quality control for all civil and structural as well as architectural works to be carried . This includes sample tests for materials and workmanship etc
• Watch for faulty workmanship and material incorporated in the works and to issue instructions for rectifications
• Check line and level and layout of structure during erection and that intentions of contract drawings are adhered to
• Check structural slab beam and column sizes and reinforcements placed and that intent of design details are followed
• Keep a record of all measurements and tests and to bring plans into conformity with the work actually executed
• Issue such further instructions and clarifications of details as and when required; and to inform Architect / Engineers for issuance of Architect’s Instruction or Architects' clarification
• Work under the direction of RE, PE and Architect for site organisation, allocation of duties and tasks and coordinate with Architect for M&E services and structural design that affects architectural and ID works.
• Participate in Client/Consultant's site meeting and technical meeting if required by RE
• Vet and signoff inspection forms and quality related issues including all dry-lays, trade demonstrations, method of statements, mock-ups, defects inspection and rectification follow-up to sign-off, M&E testing and commissioning, handover to client.
• Check architectural and ID works and intent of design details are followed. To notify Architect of any design intent conflicts and quality variations, illegal works.

What you will need:

• Registered with IES-ACES Joint accreditation Committee ( JAC ) as Resident Technical Officer with a minimum diploma in Civil Engineering or equivalent qualification
• At least 5 years or more relevant experience
• Experience in precast RC piling works and structural steel buildings are preferred
• Comfortable for Project Site at Tuas

Data System Officer

For inbound travel agency

GCE "N" / "O" level

Responsible for sales data including costing

Pleasant personality

Experience not necessary, training will be provided

5 days office work week

Working hours 9am-6pm with 1 hour lunch time

Knowledge of Microsoft office will be advantage

My Client play an important role in Singapore's public transport system by being the middleman between you, the commuter, and all the other parts that help to make it world-class.

• Salary : Attractive Remuneration + VB + AWS + Transport and Flexi Allowance
• Working Hours : 5 days’ work week, Shift Hours (7am to 4.30pm / 2pm to 11pm)

The role is responsible for monitoring and troubleshooting ticketing kiosks, coordinating with the Maintenance Team and station staff, and compiling and verifying fault data. The role includes assisting in software deployments, generating reports, and creating Work Orders in the Maintenance Management System (MMS).

Job Responsibilities:

• Coordinate with Maintenance Team and the station staff to monitor performance of the ticketing kiosks using the Monitoring Control Console (MCC) workstation.
• Perform remote troubleshooting on the ticketing kiosks if required.
• Coordinate and work with maintenance team and station staff in:compiling fault data for ticketing kiosks and generating reports.
  combining and rearranging data from source documents where required.
  Verify data from maintenance team to ensure data accuracy and improve the ease of understanding.
• Assist in all systemwide software deployment activities to all ticketing kiosks including for Annual Fare Revision Exercise and other ad-hoc projects.
• Monitor performance of ticketing kiosks post software deployment for potential faults/issues.
• Generate backend reports of the ticketing kiosks for investigation purposes.
• Create Work Orders in the Maintenance Management System (MMS) to record details of fault troubleshooting.
• Support in all ticketing kiosks and MCC workstation related tasks (e.g. update station layout drawing).

Requirements:

• Nitec in Engineering or any other relevant field.
• Proficient in Microsoft Office (especially in Excel).
• Possesses high accuracy in processing information.

EA License No. – 23C2060 |EA Registration No. - R2092390

About the company

As a full-fledged consultancy firm, 3PA Pte Ltd has been involved in a diverse range of projects embracing the full spectrum of architectural services. These include architectural design and feasibility studies, master planning, interior design, and project management. Its comprehensive portfolio includes commercial, residential, institutional, industrial, civic, transport, religious, mixed-use developments, conservation, as well as interior & urban design.

Responsibilities

• Monitor the project including progress control, quality control, variation/ cost control, safety control, environmental control etc;
• Report any critical and/ or major issues to SOR/Assistant to SOR proposing possible solutions;
• Liaise and coordinate with Consultants to resolve technical and/ or interfacing issues;
• Keep and maintain proper, detailed and updated site records on progress of work;
• Monitor and properly record inspection of different architectural trades;
• Assist Consultants/Clients in the supervision and quality assurance of construction works on site;
• Conduct in progress inspections to ensure that work carried out complies with quality, standards and requirements;
• Ensure that all installation methods and materials used are in accordance with contract specifications and drawings;
• Liaise with contractors/sub-contractors in the coordination of site works;
• Highlight discrepancies, feedback site progress and irregularities to Consultants;
• Ensure the contractors maintain work safety, cleanliness and tidiness of the site.

Requirements

• Diploma in Architectural Studies from tertiary institution and National Certificate in Construction Supervision (NCSS);
• At least 5 years of relevant site experience as a Resident Technical Officer with extensive architectural and interior design supervision, of which 3-5 years of experience preferably in architectural works for healthcare projects;
• Fully conversant with statutory regulations and codes for site supervision, quality control procedures construction administration of progress reports;
• Self-motivated, proactive and team player.

Responsibilities:

Operational Duties

• Conduct preventive maintenance programs and routine inspections of mechanical and electrical installations
• Perform ad-hoc improvement work on mechanical and electrical installations
• Address tenant complaints, conduct investigations, and carry out necessary repairs
• Supervise and check contractors’ work

Administrative Duties

• Record plant operating conditions and utility meter consumption
• Document breakdowns and repair work
• Monitor spare part inventory and usage

Others

• Plan, train, and guide a team of Technical Officer ensuring they receive proper training to enhance their efficiency.
• Lead Technical Officers and contractors in executing work orders and maintenance requests
• Ensure daily operations are conducted efficiently and in an organized manner
• Assist senior engineers in system improvement proposals and provide recommendations to reduce system downtime
• Draft incident reports and update drawings and manuals

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

Jobs Description & Requirements:

• Diploma in Civil Engineering or equivalent from tertiary institutions subject to Authority’s Representative’s Approval;
• Resident Technical Officer /site supervisors must be accepted by BCA under the Building Control Act / Resident Technical Officer /site supervisors shall possess at least the National Construction Certificate of Supervision (NCCS) and possesses minimum 3 years relevant work experience.
• Registered as Resident Technical Officer with BCA/IES/ACES;
• Possess at least 5 years of site supervision experience, including experience in supervision of pipe jacking works, building works and architectural elements and finishing works.
• Shall be conversant with contract administration, statutory requirements for site supervisors, quality control procedures, and submission of progress reports.
• Must be willing to do overtime or shift work if requested
• Preferably Singapore citizen or SPR
• Contract duration: 12 months

Please include the following information in the resume

1. Reasons for leaving current and/or last employment

2. Last drawn and/or current salary in Singapore Dollar

3. Expected salary in Singapore Dollar

4. Date of availability and/or Notice Period

5. A current photograph

6. Latest RTO Cert

Position Purpose

RISK ORM APAC mission is to provide RISK and APAC Management with a front-to-back consolidated view on operational risks of APAC activities to contribute to the reduction of operational risk and to better respond to the Regulator’s expectations. The RISK ORM APAC mandate is to challenge and supervise the Operational Risk management of APAC activities. It belongs to the second line of defence at BNP Paribas, as part of the Risk Function (RISK) and is placed under the responsibility of the APAC Chief Risk Officer.

The APAC Data Protection Correspondent (APAC DPC) is positioned within RISK ORM APAC and provides expertise on personal data protection related topics in accordance with the relevant RACI. The APAC DPC must assist the APAC Data Protection Officer (DPO) in supervising the compliance of projects and with legal and regulatory personal data protection requirements throughout the APAC region as well as the Group’s and APAC personal data protection policies. The DPC is to ensure second level controls by providing the required supervision and assistance to the 1st Line of Defence.

Responsibilities:

Direct Responsibilities

To contribute to relevant personal data protection activities realization

•To guarantee required norms and methods definition and application to a company’s good data protection risks apprehension (follow-up of projects, information systems adaptation, declarations conception and maintenance, subcontractors contracts analysis, follow-up on control plans reporting, etc.)

•To guarantee advice and assistance to strategical program ongoing.

To support the implementation of the privacy strategy defined by APAC DPO

•To assist the APAC DPO in the supervision and monitoring of implementation of the Group's Data Protection policies and guidelines, bearing the local regulatory requirements in mind, to ensure consistency

•To define action plans and corrections related, and to ensure application of the same

•To alert APAC DPO when activity is under operational risk (non-appropriateness between needs and resources, etc.), to propose correction solutions and to implement those solutions

•To contribute to continuous efficiency improvement and to any optimization process.

To contribute to operational activities achievement

•To adjudicate or mediate APAC DPO engaging decisions, emergencies and escalated issues

To contribute to permanent control actions

•To contribute to perform LOD2 controls and challenge LOD1

•To contribute to perform the check and challenge of the RCSA

•To contribute to RISK ID exercise

•To contribute to OR&C report

To ensure a professional network development

•To participate in local Data Protection Committees when requested by the DPO

•To contribute to Internal Control Committee

•To collaborate with local CROs and RISK teams

Supporting Responsibilities

•To assist the DPO on exchanges with the authorities in charge of the protection of personal data under the responsibility of the DPO

•To assist the DPO in the supervision and implementation of Privacy by Design principles throughout the lifecycle of all projects, activities, products, services, processes and systems

•To contribute to role development by validating data protection requirements for new activities, new products, services or specific operations, and to carry a technical assistance

•To receive, process and advise internal and external local solicitations about data protection

•To receive, process and advise requests from data subjects, subcontractors and partners etc.

•To itemise existing processes and identify breaches regarding data protection requirements (APAC local regulation & GDPR requirements)

•To contribute to perform risk assessment on personal data breaches

•To assist the DPO in monitoring documentation, e.g. the RoPA (Register of Processing Activities)

•To contribute to the identification and notification process for data protection violations according to defined procedures and local legal requirements

•To realize effectiveness for data protection controls and to ensure expected reporting

•To ensure regular reporting to APAC DPO about the activity

•To assist the DPO, where required, with local language nuances, law and practices.

•To contribute in the creation and implementation of awareness programs and to the promotion of a culture of protection of personal data within the scope of responsibility.

Technical & Behavioral Competencies:

*Level:

Level 1: Deep Level 2: Intermediary Level 3: Basic

Knowledge (Required to exercise the position)

•To know standards and norms about data protection - Level 1

Know-how (Implementation of technics, methods, tools to achieve activities)

Technics

•To know how to assess maturity level of the existing facility about Data Privacy - Level 1

Transverse

•To have a professional face-to-face or phone discussion in a foreign language - Level 1

•To prioritize - Level 1

•To efficiently manage several topics at the same time - Level 1

•To issue advice / recommendation taking into account every parameters - Level 1

•To have an efficient speaking communication - Level 1

•To conceptualize / to formalize an idea, a process or a project - Level 1

•To have an efficient writing communication - Level 1

Tools

•To work with BNP Paribas tools (e.g. Data Protection Hub, Risk 360) - Level 2

Behavioural and soft skills:

•To efficiently multi-task with topics and maintain attention to detail / rigor - Level 1

•To issue advice / recommendation considering all parameters - Level 1

•To have efficient communication skills (oral & written) - Level 1

•To conceptualize / formalize an idea, a process or a project - Level 2

•To work as a team / transversally - Level 1

•To identify and analyse risks for the activities that are handled - Level 1

•To assess, issue an opinion - Level 1

•To deploy a strategy and to define an action plan - Level 2

•To animate resources and coordinate their intervention - Level 1

•To show diplomacy to allow a message to be heard - Level 1

•To show conviction, to generate interlocutor’s acceptance - Level 1

•Being able to anticipate and come up with ideas - Level 2

•Creativity and innovation - Level 2

•To show discretion about delicate and/or confidential topics - Level 1

•Ability to manage conflict - Level 2

•To integrate multicultural dimension - Level 1

Special Qualifications (If required)

•Degree holder in legal,business or computer science or IT

•At Least 5 years of relevant experience in IT risk, Cyber security, Data Protection and related regulatory topics

•CIPP Certification or similar privacy certificate would be a plus

a very good understanding of EU GDPR with IAPP/E certification

•3-5 years relevant working experience in privacy is a minimum

•5-8 years in total working experience

•Previous APAC or cross-territory experience preferred

•Experience in senior level reporting and discussion

Roles and Responsibilities

· Work closely with architectural and design teams to creates design concept visualisations in accordance to the context and requirements of projects;

· Conduct research to uncover new methods of visual delivery and communicates data driven insights and recommendations to various stakeholders;

· Visualize new design ideas by executing sketch prototypes and mock-ups for the development of designs;

· Demonstrates stakeholder management skills in partnering internal stakeholders to develop quality creative solutions that meet business objectives and goals;

· Possesses strong mastery in either hand-drawing, prototyping of physical prototypes, storyboarding, two-dimensional (2D) and three-dimensional (3D) modelling and rendering, hardware tinkering, or videography and animation.

Requirements

· Diploma or degree in Architecture or graphics, media or web design, or equivalent;

· Proficiency in Lumion and SketchUp;

· Proficiency in other 3D software (3D Max/Rhino/Vray/3D Max/Corona/UE4), Photoshop and/or AutoCAD is a plus

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all works including all civil and architectural works, plumbing, sanitary, drainage, irrigation and sewer system, commuters facilities, road works, trial trenches and utilities diversion etc.
• To coordinate the contractor, AC, QP(D), relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structure, formwork support systems systems and gantry crane and submit evaluation report endorsed by a PE
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review Contractor's design and supervise all works associated to micro-tunneling and mining, Flyover works, sewer diversion (including shaft construction and pipe-jacking operations.

Requirements:

• Diploma or Degree in Civil and Structural Engineering
• At least 4 years’ of experience, of which 3 years experience in either geotechnical works or airport construction.
• Possess a valid RTO cert by IES Singapore

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• To coordinate the contractor, AC, QP(D), relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structure, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

- Possess a valid RTO (Tunnel) cert by JAC of IES/ACES as QSS Singapore

1. Job Summary (General Nature / Objectives of the Job):

Oversee and monitor construction activities, ensuring that all project aspects meet regulatory standards and are completed within timelines, budgets, and quality benchmarks. The role involves collaboration with contractors, consultants, and project stakeholders, focusing on site management, safety, and technical compliance in Waterfront Development construction project .

2. Key Responsibilities and Activities:

• Site Supervision: Ensure daily site inspections, monitor construction progress, and provide technical guidance.

• Quality Assurance: Verify that construction practices align with project specifications, codes, and quality standards.

• Safety Management: Enforce health and safety guidelines, conducting regular safety audits and ensuring all personnel adhere to safety protocols.

• Documentation: Maintain accurate records of project activities, including reports, permits, and inspection notes.

• Coordination: Work closely with project engineers, consultants, and contractors to resolve any site issues.

• Regulatory Compliance: Ensure all work complies with Singapore's building and environmental regulations, especially for waterfront developments.

3. Behaviors Needed to Succeed:

• Attention to Detail: Meticulously assess all aspects of construction work for quality and compliance.

• Problem-Solving: Proactively address challenges and provide practical solutions on-site.

• Adaptability: Adjust to changing project conditions and requirements with flexibility.

• Communication: Maintain clear and professional interactions with all stakeholders.

4. Personal Competencies:

• Integrity and Accountability: Uphold ethical practices and take responsibility for decisions and site outcomes.

• Team Collaboration: Work effectively with diverse teams and manage contractor relationships.

• Decision-Making: Demonstrate sound judgment, especially when unforeseen issues arise.

5. Technical Competencies:

• Knowledge of Waterfront/Marine Engineering: Understand specific requirements of waterfront projects.

• Construction Methodology: Knowledge of civil engineering, concrete works, and structural engineering related to main construction.

• Proficiency in Quality Control Standards: Familiarity with standards such as ISO, as well as local construction codes.

• Health & Safety Standards: Familiarity with safety practices and requirements on a construction site.

6. Skills & Knowledge:

• Project Management Tools: Proficiency in project tracking software like MS Project or Primavera.

• Technical Drawings Interpretation: Ability to interpret structural and architectural drawings accurately.

• Regulatory Knowledge: Understanding of Singaporean construction regulations, especially concerning environmental impact on waterfront areas.

7. Formal Education:

• Major Study/Specialist (Education): Degree or Diploma in Civil Engineering, Construction Management, or a related field. Additional specialization in Marine or Waterfront Engineering is advantageous.

8. Experience Required:

Years of Experience: Typically, 5–8 years of experience in construction, with at least 3 years in a similar role overseeing large-scale projects, especially those involving marine or waterfront development.

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• Coordinate the contractor, AC, QP(D), and relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structures, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review the Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for the presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

Stand in rate to be discussed during interview.

Job Description & Requirements

• Assist on site to ensure that all works comply fully with regulatory and client's requirements
• Work closely with Professional Engineers, regulatory authorities and contractors to provide planning, design and supervision leadership not only to solve site problems, but also to ensure timely completion of the Projects
• Responsible for implementing and sustaining the site supervision quality & safety assurance system
• Carry out supervision of structural & geotechnical works by identifying any non-conformity of contractor's works on site
• Understand drawings & contract documents in carrying out the works
• Implement the site supervision quality and safety assurance system
• To carry out regular site checks on contractor & ensure compliance with health and work safety in accordance with MOM regulation
• Ensure that proper site documentation for ongoing works, site meetings, safety records, method statements, shop drawings, as built submissions etc., are well managed

Requirements

• Must be accredited as a Resident Technical Officer with BCA/IES/ACES
• Minimum 5 years of relevant experience in projects similar in nature to the projects
• Good supervisory and leadership skills
• Excellent communication skills, mathematical acumen, time management aptitude and the ability to solve complex problems
• Please apply with a comprehensive resume, stating all working experiences, current and expected salary.
• Only shortlisted candidate will be notified.

Joining Arup

Arup’s purpose, shared values and collaborative approach has set us apart for over 75 years, guiding how we shape a better world.

We have a vacancy to be a part of a prestigious healthcare project in Singapore. As a Resident Technical Officer (RTO), you will assist the Resident Engineer (RE) in supervising the construction of civil and structural works. You will ensure that all activities comply with project specifications and Building Control regulations, supporting the efficient execution of construction tasks.

This is for an initial 12 months contract but can be renewable subject to project needs.

The Opportunity

At Arup, you belong to an extraordinary collective – in which we encourage individuality to thrive. Our strength comes from how we respect, share and connect our diverse experiences, perspectives and ideas.

You will have the opportunity do socially useful work that has meaning – to Arup, to your career, to our members and to the clients and communities we serve.

• Assist the RE in providing supervision for construction works, ensuring compliance with project specifications and regulations.
• Quality control of all civil, structural and architectural works.
• Monitor progress of the works on site and any off-site manufacturing facilities as well as report delays immediately.
• Support in maintaining records of works, materials, equipment, and contractor schedules, ensuring site safety and compliance.
• Help manage the site office, ensuring cleanliness, proper filing systems, seating arrangements, office security, and maintenance of office equipment.
• Provide standing supervision as and when required by contractors and provide full support to the RE in communicating instructions and ensuring that works are carried out accordingly.
• Check drawings, documents and report discrepancies.

Is this role right for you?

• Minimum 10 years relevant experience
• Registered and Practising RTO’s certificate for the past 5 years
• Relevant experience in supervising substructure construction, bored piling works, precast construction and buildings with at least eight storeys
• Good working knowledge of concrete precast works and compliance to local building regulations
• Strong ability to interpret drawings and contract documents on works to be carried out
• Good analytical ability with strong verbal and written communication skills
• Good team player with other site staff
• Past work experience in healthcare, residential or institutional projects.

What we offer you

At Arup, we care about each member’s success, so we can grow together.

Guided by our values, we provide an attractive total reward package that recognises the contribution of each of our members to our shared success. As well as competitive, fair, and equitable pay, we offer a career in which all of our members can belong, grow and thrive – through benefits that support health and wellbeing, a wide range of learning opportunities and many possibilities to have an impact through the work they do.

We are owned in trust on behalf of our members, giving us the freedom, with personal responsibility, to set our own direction and choose work that aligns with our purpose and adds to Arup’s legacy. Our members collaborate on ambitious projects to deliver remarkable outcomes for our clients and communities. Profit Share is a key part of our reward, enabling eligible members to share in the results of our collective efforts.

Different people, shared values

Arup is an equal opportunity employer that actively promotes and nurtures a diverse and inclusive workforce. We are an open environment that embraces diverse experiences, perspectives, and ideas – this drives our excellence.

Guided by our values and alignment with the UN Sustainable Development Goals, we create and contribute to equitable spaces and systems, while cultivating a sense of belonging for all. Arup provide an environment where you will make a positive difference. Discover more about life at Arup at www.arup.com/careers/your-life-at-arup.

We are committed to making our recruitment process and workplaces accessible to all candidates. Please let us know if you need any assistance or reasonable adjustments throughout your application or interview process, and/or to perform the essential functions of the role. We will do everything we can to support you.

Interested candidates are invited to apply by 18 November 2024.

Roles & Responsibilities

1. To assist the Project Manager in implementing the safety management system to ensure staff and workers work in a safe and healthy environment.
2. To assist the Project Manager in implementing the permit to work system and to stop & report to the project manager any incompatible works relating to the same.
3. To act as the secretary of the Project WSH Committee and chair the meeting such that the company staff and subcontractors are aware of the site activities and the required actions.
4. To assist the Project Manager in complying with the WSH Acts and Regulation.
5. To conduct periodic safety inspection to verify level of safety compliance so that the safety standards are constantly improved.
6. To ensure site compliance with statutory safety requirements and in-house safety rules and regulations and to report any deviations to the Project Manager for management consideration.
7. To recommend to the Project Manager any necessary corrective measures to be taken on safety non-compliance and deviations in order to enhance the site safety.
8. To update site management on any new or changes to current statutory safety requirements and also take the necessary actions.
9. To investigate any accident/ dangerous occurrence/ incident and recommend corrective measures to prevent recurrence.
10. To liaise with officers from MOM/NEA /PUB on matters pertaining to safety, mosquito breeding, ECM etc and take the necessary action for their comments.
11. To conduct safety training and organise safety promotional activities.
12. To ensure safety documentation is kept current and ready for MOM, NEA or ISO Audit.
13. Carry out the works assigned for compliance with requirements of ISO 9000, ISO 14001 and OHSAS 45001
14. Be involved in the evaluation of risk assessment and plan, manage and review Management Programmes.
15. Be involved in all the sub-con safety and health matters pertaining to the site.
16. Prepare and submit the site environment control Programme and ensure that the staff and workers are aware and understand the intention.
17. Inspect the site to ensure that all facilities and equipment relevant to the maintenance of the environment health are in working condition.
18. Assist the authority to investigate outbreaks of infectious, vector-borne disease.
19. Organise campaigns, training course to develop and sustain the interest of workers in maintaining good environment health standards.
20. To assist the Project Manager in the management of the workers e.g their courses, reporting sick, home leave, accommodation.
21. To assist in achieving the safety standards required by the site’s developer.
22. Be involved in safety aspects for planning of activities that are in view of the public or in area that the public uses.
23. Must hold a valid registration with MOM as a WSH Officer and with NEA as an ECO.

Support Unified Comms Systems

· Maintaining Unified Comms system through preventive maintenance and follow ups on problem resolutions.

· Attending to user requirements and work with vendor to provide solutions.

· Work with other departments for smooth flow of processes and procedures.

Projects rollout

· Plan technical deliverables including system enhancements and upgrades to meet project requirements within allocated budget and schedule.

· Plan resource allocation and utilisation across the various project and quarterly releases.

· Plan and collaborate across different application teams and overseas counterparts to manage technical dependencies of the solution in the project delivery cycle.

· Monitor and manage risks /issues related to technical delivery.

1. Skilled in NICE Engage Voice Recording systems administration.

2. Experienced in various roles in Service Delivery, Vendor Management and Incident / Change Management

Responsibilities

• Coordinate with Maintenance Team and the station staff to monitor performance of the ticketing kiosks using the Monitoring Control Console (MCC) workstation.

• Perform remote troubleshooting on the ticketing kiosks if required.

• Coordinate and work with maintenance team and station staff in:

o compiling fault data for ticketing kiosks and generate reports.

o combining and rearranging data from source documents where required.

o Verify data from maintenance team to ensure data accuracy and improve the ease of understanding.

• Assist in all systemwide software deployment activities to all ticketing kiosks including for Annual Fare Revision Exercise and other ad-hoc projects.

• Monitor performance of ticketing kiosks post software deployment for potential faults/issues.

• Generate backend reports of the ticketing kiosks for investigation purposes.

• Create Work Orders in the Maintenance Management System (MMS) to record details of fault troubleshooting.

• Supports in all ticketing kiosks and MCC workstation related tasks (e.g. update station layout drawing).

• Any ad-hoc additional duties as instructed if required.

Requirements:

• Nitec in Engineering or any other relevant field.

• Proficient in Microsoft Office (especially in Excel).

• Possesses high accuracy in processing information.

To apply, please visit to www.gmprecruit.comand search for Job Code:21189.

To find out more about this opportunity, please contact Lionel Liew at [email protected].

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793| EA Personnel: Lionel Liew | Registration No: R1330693