Total 44 network engineer job vacancies in Manufacturing / Production category in singapore changi

Job Description & Requirements:

• Develop detailed manufacturing processes, including assembly procedures, testing protocols, and quality control checks.
• Create efficient process flows to minimize waste and maximize productivity.
• Continuously analyse and improve existing processes to reduce costs, increase yield, and enhance quality.
• Design and procure necessary manufacturing equipment and tooling.
• Determine the required production capacity and allocate resources accordingly.
• Plan and design the manufacturing facility layout for optimal workflow and efficiency.
• Oversee pilot production runs to identify and address potential issues.
• Validate processes to ensure they meet product specifications and quality standards.
• Implement quality control measures to ensure product consistency.
• Drive continuous improvement initiatives to enhance product quality and process efficiency.
• Investigate and resolve quality issues.

Requirements:

• Degree / Diploma in Mechanical/Electrical/Mechatronics
• 1-4 years of relevant experience preferably in Assembly of Equipment or Test area preferably in Semiconductor Industry
• Experience in maintaining the Quality of Work
• Knowledge of Material BOM’s
• Capable of understanding Engineering drawings for Mechatronics-assembly
• Experienced in Manufacturing Engineering Tools (5S, Process Flow, FMEA, System Risk Analysis, DMAIC, 8D, Control Plan, SOP, SOO, Work Instructions, Root Cause Analysis, Capacity versus Demand)
• Experience in Mechanical Fitting, Cable Routing and Installation of Equipment. Preferably in a Semiconductor Equipment Industry.
• Able to use Solid works to design simple fixtures / jigs
• Technical skills must include basic knowledge of mechanical/Electrical/Mechatronics
• Ability to work independently with minimal supervision

Key Responsibilities

• Develops, implements, and maintains methods, operation sequence and processes in the fabrication of parts, components, sub-assemblies and final assemblies.
• Interfaces with other engineering functions to coordinate the release of product improvements and/or new products. Launches, releases, approves and implements or issues engineering change requests as required to support design engineering and Operations with new and existing products.
• Estimates manufacturing costs, determines time standards and makes recommendations for tooling and process requirements. Uses DFx principles to reduce manufacturing and/or product costs, and improve delivered product quality.
• Develops and uses test procedures, including assisting with the definition of test specifications with design / software engineering. May work with test engineering on the design and development of text fixtures. May assist in the coordination of test fixture sourcing activities.
• Gathers operational and test data and evaluates results; may takes corrective/continuous improvement actions.
• Evaluates work methods, procedures and policies. Participates in the development and maintenance of new and existing business processes; updates as necessary to ensure current practices are documented.
• Determines root cause and corrective action analysis for issues that arise during assembly and/or test of systems; provides failure analysis report as required.
• Performs Process Failure Mode, Effects and Criticality Analysis when working with New Product Development.

Requirements

• Min 3 years of experiences as Manufacturing Engineer in semiconductor/ electronics or engineering industries
• Relevant Engineering qualifications
• Able to work with any levels of stakeholders globally
• Able to attend global meetings of different time zones
• Project management experiences would be an added advantage
• Microsoft excel and Tableau

Work Location

• 8 Upper Changi Road (Bus 2, 5, 37)
• No company transport available

Job Description

Key Responsibilities

• Develops, implements, and maintains methods, operation sequence and processes in the fabrication of parts, components, sub-assemblies and final assemblies.
• Interfaces with other engineering functions to coordinate the release of product improvements and/or new products. Launches, releases, approves and implements or issues engineering change requests as required to support design engineering and Operations with new and existing products.
• Estimates manufacturing costs, determines time standards and makes recommendations for tooling and process requirements. Uses DFx principles to reduce manufacturing and/or product costs, and improve delivered product quality.
• Develops and uses test procedures, including assisting with the definition of test specifications with design / software engineering. May work with test engineering on the design and development of text fixtures. May assist in the coordination of test fixture sourcing activities.
• Gathers operational and test data and evaluates results; may takes corrective/continuous improvement actions.
• Evaluates work methods, procedures and policies. Participates in the development and maintenance of new and existing business processes; updates as necessary to ensure current practices are documented.
• Determines root cause and corrective action analysis for issues that arise during assembly and/or test of systems; provides failure analysis report as required.
• Performs Process Failure Mode, Effects and Criticality Analysis when working with New Product Development.

Requirements

• Min 3 years of experiences as Manufacturing Engineer in semiconductor/ electronics or engineering industries
• Relevant Engineering qualifications
• Able to work with any levels of stakeholders globally
• Able to attend global meetings of different time zones
• Project management experiences would be an added advantage
• Microsoft excel and Tableau

Work Location

• 8 Upper Changi Road (Bus 2, 5, 37)
• No company transport available

• Continuous Service Improvement: Add value to Data Centre Operations by identifying improvement opportunities to sharpen Production stability, stakeholders experience and overall service quality.

• Identifying opportunities for automation within production processes to streamline operations and reduce manual intervention.

• Timely escalation and communication of major incidents such as escalation matrix, leading, driving, facilitating, and chairing all investigation activities.

• Being accountable for resolving the incident with workaround or permanent solution.

• Participate in troubleshooting system and network connectivity problems before escalation.

• Monitoring production metrics and performance indicators to ensure targets are met.

• Ensuring compliance with safety and regulatory standards in production.

• Other ad-hoc duties as instructed.

Good years of IT experience as Level 1 Production Operations engineer.

• Strong analytical skills: The ability to analyse production processes and identify areas for improvement and optimisation.

• Technical Proficiency: Profound knowledge of production systems issues and effective solutions to enhance operation efficiency.

• Problem-Solving Aptitude: A knack for troubleshooting production issues and devising effective solutions to enhance operational efficiency.

• Experience in Data Centre facilities, including temperature and humidity monitoring system, smoke detection and fire suppression systems, Uninterrupted Power Supply (UPS) units, CCTC, keypress units, etc. • Familiarity with AWS tools such as CloudWatch, Cloud Trail, etc would be an advantage.

• Able to work shift duties. -The shift hours are as follow:

▪ 1st shift - 7:00 am to 3:00 pm

▪ 2nd shift - 2:45 pm to 10:30 pm

▪ 3rd shift - 10:15 pm to 07:15 am

o The 8-day rotational shift pattern is as below:

▪ Two days 1st shift, followed by

▪ Two days 2nd shift, followed by

▪ Two days 3rd shift, followed by

▪ Two off days.

The Manufacturing Engineer is responsible for product, process and equipment development and ensuring that existing processes and equipment meet quality requirements and operational objectives at GE Aviation, Engine Services - Singapore. This role requires deep level of relevant experience and expertise within the same manufacturing/production field

Essential Responsibilities:

• Own all technical issues relating to the product/process, eg. product and process yield rates, etc.
• Perform process trials, analyse data and produce write-ups on the trials.
• Prepare technical specifications for the purchase and upgrading of relevant equipment.
• Implement New Product Introduction (NPI)s, new coating and welding processes into production.
• Generate Work Instructions and Operating Procedures.
• Ensure that all relevant processes comply with quality requirements, conduct investigations and implement corrective actions as required.
• Collaborate with relevant stakeholders to improve equipment utilization and labour efficiency and reduce operating costs through Lean initiatives.
• Conduct Risk Assessments and ensure that relevant processes are operated in compliance with Environmental, Health and Safety Regulations and Policies.
• Conduct training and certification for relevant technicians.
• Familiar with using lean concept to drive continuous improvement and productivity in the processes.
• Familiar with Lean concepts

Qualifications/Requirements:

• Degree in either Mechanical or Aerospace Engineering from a local or internationally recognised university.
• At least 5 years experience in a Manufacturing Environment is preferred.
• Candidate with previous experience within Aerospace industry is preferred.
• Candidate with a background in manufacturing or production would be considered.

Desired Characteristics:

• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes, critical thinker

The Manufacturing Engineer – NPI is responsible for the timely development and industrialization of Component Repair New Product Introduction (NPI) projects, working with relevant functional teams, and ensuring safety, quality, delivery and cost objectives are met.

Roles and Responsibilities

• Lead and develop repair processes for Component Repair New Product Introduction (NPI)
• Generate manufacturing routers and instructions, Repair Source Substantiation packages, and other documentation required for industrialization and approval.
• Lead resolution of technical and operational challenges or concerns raised, and ensure follow through till approval is obtained and repair is handed over to shop operations.
• Work closely with the Repair Development and Delivery team in Singapore, USA & other global sites, during the NPI repair development phase & industrialization.
• Manage multiple NPI projects by providing scheduling, resource management, budget control and EHS compliance.
• Lead and effectively interface with Operations, Quality, Engineering, and other support teams during NPI repair industrialization in the Shop, and ensure that it meets Safety, Quality, Delivery, and Productivity objectives, within schedule and budget.
• Interface with vendors and internal functions in an effective manner to ensure that the action items to be carried out for the NPI are executed on time and on budget.
• Assure that all engineering designs and technical data are completed and accurately documented to provide an accurate technical/historical base for future reference and to meet customer / end user requirements.
• Participate in Lean initiatives, including continuous improvement of processes, and utilize Six Sigma tools for NPI process improvements.
• Implement new technology and/or process improvements to increase productivity of new repair processes.

Required Qualifications

• Bachelor’s degree from an accredited university in Mechanical / Aeronautical / Material or other relevant Engineering discipline with 4 years of relevant experience.

Desired Characteristics

• Good understanding of manufacturing and inspection tools and processes used in the repair industry – heat treat, thermal spray, peening, welding, machining, etc.
• Working knowledge of blueprints, application of engine manuals and technical substantiation process will be an advantage.
• Good time management and strong organizational skills, with ability to multi-task to meet deadlines and customer needs.
• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes, critical thinker.

Roles and Responsibilities

• Lead and develop repair processes for Component Repair New Product Introduction (NPI) independently.
• Generate manufacturing routers and instructions, Repair Source Substantiation packages, and other documentation required for industrialization and approval.
• Lead resolution of technical and operational challenges or concerns raised, and ensure follow through till approval is obtained, and repair is handed over to shop operations.
• Work closely with the Repair Development and Delivery team in Singapore, USA & other global sites, during the NPI repair development phase & industrialization.
• Manage multiple NPI projects by providing scheduling, resource management, budget control and EHS compliance.
• Lead and effectively interface with Operations, Quality, Engineering, and other support teams during NPI repair industrialization into the Shop and ensure that it meets Safety, Quality, Delivery and Productivity objectives, within schedule and budget.
• Interface with vendors and internal functions in an effective manner to ensure that the action items to be carried out for the NPI are executed on time and on budget.
• Assure that all engineering designs and technical data are completed and accurately documented to provide an accurate technical/historical base for future reference and to meet customer / end user requirements.
• Lead and participate in Lean initiatives, including continuous improvement of processes, and utilize Six Sigma tools for NPI process improvements.
• Implement new technology and/or process improvements to increase productivity of new repair processes.

Required Qualifications

• Bachelor’s degree from an accredited university in Mechanical / Aeronautical / Material or other relevant Engineering discipline with 7 years of NPI experiences.

Desired Characteristics

• Demonstrated knowledge and experience in manufacturing/repair processes and development/industrialization of aircraft engine component repairs.
• Good understanding of manufacturing and inspection tools and processes used in the repair industry, such as heat treat, thermal spray, peening, welding, brazing, machining, etc.
• Good knowledge of blueprints, application of engine manuals and technical substantiation process.
• Knowledge of GD&T, tool/fixture design and applications in repair.
• Good time management and strong organizational skills, with ability to multi-task to meet deadlines and customer needs.
• Knowledge of Lean principles, tools and methodology.
• Humble: respectful, receptive, agile, eager to learn.
• Transparent: shares critical information, speaks with candor, contributes constructively.
• Focused: quick learner, strategically prioritizes work, committed.
• Leadership ability: strong communicator, decision-maker, collaborative.
• Problem solver: analytical-minded, challenges existing processes, critical thinker.

Salary: 9,000 - 10,850 monthly + RSU

As part of this role, you will

• Interact with partners to understand the problems they are facing
• Design and build products for platform partners
• Collaborate globally with Sales, Implementation and Solutions engineering to ensure seamless product integration
• Evolve Wise's card and multi-currency account offerings to meet new partner needs

Lead & support the Manufacturing Engineering activity in Engine Overhaul/Component Repair Production Area. Act as Technical Authority, owner of the Engineering Standards in SAESL Operating System and ensure deployment of the initial and continuing process capability standard of the methods to the cell including the resolution of the technical issues/problems/arisings to meet operation cell requirements of safety, cost delivery rate and leadtime (SQCD).

Responsibilities

• HSE – Responsible for ensuring that all processes and methods deployed within the cell/area of accountability are in full compliance to Health, Safety & Environmental Standards and meet the expectations of the Zero Harm Programme.
• Product Safety – Responsible for ensuring that product safety risks are understood and mitigated to meet the required safety levels and reduce the safety risks so far as is reasonably practicable. Support requirements of the Company’s Safety Management System, and for promoting a product safety culture in the organization.
• Safety & Quality – To promote a Behavioral Based Safety Culture. Together with Operation advocate ‘Speak Up’ and embed the elements of Narrate & Demonstrate in the areas of responsibilities.
• Quality – Promote a culture of zero defects ensuring that manufacturing processes and methods within the business are developed and deployed to support Right First Time methodology.
• Coach the team in the use of SAESL Operating Sytem, DMAIC and Sytem Engineerin Tools. Ensure compliance to all relevant company, legislative and technical policies, and standards.
• Cost – To provide leadership to Manufacturing Engineers to support operation cells to drive productivity and optimize OPEX costs.
• Standards – define, maintain and enhance to SAESL Operating System Standards. Provide Tools for ME to imrplement the Standards, working with the cell/area of accountability and Process Owners, and where applicable with the suppliers, drive manufacturing processes towards identified consistent best practice.
• Identify, synthesise and locally govern the requirements for improvements and innovations in manufacturing processes and methods of manufacture within their area of accountability.
• Lead – Act as Technical Authority specifying Manufacturing Engineering, process requirements, methods and make technical decisions in relation to the area of accountability including FAIR/MSA activities and Source & method change.
• Lead – To provide leadership to drive accountability and enablement through engagement and coaching team members, so that everyone can be at their best.
• People – Develop talent to meet the required competencies for the Manufacturing Engineers. Continuously seek to expand knowledge and experience to increase effectiveness in understanding existing and new activities.
• Capability & Technology – Lead the technical input and integrate Manufacturing Technology, Digital Manufacturing and Product Introduction activities to support growth, capability and capacity to achieve operational planned objectives.
• Deploy capability (including NPI) – Buy –off the production readiness of new manufacturing capabilities and assemblies.
• Develop numerate, real time methods for capturing process capability, and ensure it is available and acted on within the facility/supply chain.
• Maintain and/or govern Production Technical Packages (technical instructions, programmes, tooling, etc) for all parts/assemblies which clearly define the manufacturing process.
• Ensure manufacturing processes and/or methods of manufacture within the business and suppliers are capable of meeting and continuing to meet the requirements for quality, cost, delivery rate and time.
• Co-ordinate the technical support to operations and suppliers such that problems and arising are resolved in a structured and timely manner.

Responsibilities:

• Work closely with customer and in-house Design engineering team to evaluate new designs as part of product life cycle.
• Ensure tool assembly completion and final testing are met within project timeline
• Perform day-to-day physical hands-on on parts, modules assembly until completion of whole system build-up
• Work closely with cross-functional team to resolve any diverse and complex issues found during the build
• Require to carry out individual module checkout testing prior to system integration
• Require to carry out final customer acceptance testing at complete system level prior to shipment.
• Require to analyze, troubleshoot and resolve any discrepancies found during testing activity
• Ensuring all manufacturing test data are within customer specification and recorded it accurately in a timely manner
• Perform software and hardware interaction, troubleshooting, and provide feedback to the customer or in-house design engineering team
• Train technicians and new employees on product platforms
• Provide mentorship or advice to technicians in daily troubleshooting effort
• Collaborate with quality and manufacturing engineers to resolve and determine the root cause (CAPA) for any out-of-box quality feedback by customers
• Support manufacturing engineer for new product introduction and transition new products to operation
• Ensure tools shipped are of high-quality standard and timely to our customer
• Review and respond to any technical queries arise from suppliers
• Understand BOM structure, ECR/ ECO process and able to implement it accurately, timely and cost-effectively.
• Review and generate manufacturing process flow and work instructions.
• Suggest and implement changes in a manufacturing environment, facilities, and equipment to increase the efficiency of operations
• Ability to amendment drawing and drafting using Autocad/Solidworks
• Ability to redline any issues found in the drawing during the build and work closely with the customer or in-house design engineer to resolve the problems
• Ability to conduct MRB to review any non-conformance parts whether to disposition or any rework
• Participate in continuous improvement, ISO9001:2015 certification, cycle time reduction and 6S house keeping
• Any others duties assigned by his/her superior / Manager.
• Occasional travel may be required.

Requirements:

• Bachelor’s degree in a relevant Engineering discipline and 3 years of experience working with and troubleshooting complex electromechanical system (OEM).
• Able to understand mechanical and assembly drawings, electrical schematics, and Bills of Materials.
• Excellent problem solving and analytical skills.
• Excellent verbal and written communications skills.
• Excellent Project management skills.
• Highly result driven individual, self-motivated and ability to multi-task and manage dynamic priorities.
• Good interpersonal and communication skills and a good team player.
• Ability to participate in a cross-functional team environment.

• Remuneration Package: Up to $3,300 + Fixed Allowances of $1,100 
• Location: Jurong Island (Company Transport Provided at Designated Points) 
• Shift Job: 12 Hours, Rotating AM and PM Shifts 

Are you a fresh graduate with a degree in Chemical Engineering? Ready to jumpstart your career in a dynamic and cutting-edge environment? Join our client, a reputable chemical manufacturing company, where you will work with the latest manufacturing technology and advanced engineering control systems. Lead a team of skilled technicians and ensure smooth and safe plant operations while gaining invaluable experience in process optimization and quality conformance.

Responsibilities:

• Lead and Oversee: Guide a team of Production Technicians to ensure the safe and efficient running of production processes.
• Support Process Engineering: Assist the Process Engineer in conducting activities and projects to optimize operations and achieve cost efficiency.
• Troubleshoot and Resolve Issues: Address plant, equipment, and quality issues promptly and recommend effective countermeasures.
• Maintain Equipment Integrity: Monitor plant equipment to ensure reliability and integrity.
• Optimize Operations: Support shift operations by providing optimal operating conditions for stable plant performance and high product quality.
• Train and Develop: Mentor and develop team members to enhance their skills and performance.

Requirements:

• Educational Background: Degree in Chemical Engineering or equivalent.
• Technical Skills: Knowledge of process control, troubleshooting, plant equipment, and instrumentation.
• Key Attributes: Strong analytical and technical report writing skills, leadership qualities, initiative, drive, commitment, ability to handle pressure, and excellent communication skills.

If you are ready to embark on an exciting career journey and make a significant impact in the chemical industry, we want to hear from you!

Interested candidates can forward their CVs in MS Word format to [email protected]

Reg No. R1983718

Triton AI Pte Ltd

License no. 21C0661

Key Responsibilities

1. Develops, applies, revises, maintains and/ or tests quality/ reliability standards to ensure alignment with customer expectations.
2. Designs and implements methods and procedures for inspecting, testing and evaluating the quality/ reliability of products
3. Develops, implements quality/ reliability test plans and performs failure analysis. Perform FMECA, document CRAMS and work with supplier and engineer to enable crams test plan. Also perform PQP at supplier. Reliability modeling and ERAMS
4. Gathers operational and test data and evaluates results. Prepares documentation for testing.
5. Develops methods and parameters, project methodology and/ or project proposals.
6. Evaluates work methods, procedures and policies to ensure world class quality standards are attainable.
7. May be accountable for projects/ programs as wells as, developing methods and parameters, project methodology and/ or project proposals.
8. Coaches, mentor and conduct training for targeted organizations on quality & reliability process

Functional Knowledge

• Demonstrates expanded conceptual knowledge in own discipline and broadens capabilities

Business Expertise

• Understands key business drivers; uses this understanding to accomplish own work

Leadership

• No supervisory responsibilities but provides informal guidance to new team members

Problem Solving

• Solves problems in straightforward situations; analyzes possible solutions using technical experience and judgment and precedents

Impact

• Impacts quality of own work and the work of others on the team; works within guidelines and policies

Interpersonal Skills

• Explains complex information to others in straightforward situations

About SAESL

A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.

• One of the World's largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL

• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

Responsibilities

• Perform the Manufacturing Engineering activity in Engine Overhaul/Component Repair production areas. Act as Technical Authority, assuring the initial and continuing capability of the Production method to produce conforming product and ensuring the resolution of technical issues/problems/arisings to meet business and customer requirements for safety, cost, delivery rate and leadtime (SQCD). Support integration on all Manufacturing Engineering activities across the product lifecycle and through the supply chain.
• HSE – Practice full compliance to Health, Safety & Environmental Standards and meet the expectations of the Zero Harm programme.
• Product Safety – Understand product safety risks and work on mitigation to meet the required safety levels supporting requirements of the Company’s Safety Management System.
• Quality – Practice a culture of zero defects ensuring that manufacturing processes and methods within the business are developed and deployed to support Right First methodology. Support process and product related Quality investigation, and manage NADCAP accreditation.
• Delivery – Ensure that manufacturing processes and methods of manufacture within the business and suppliers are developed and deployed to support/deliver Right First Time manufacture using SPS, DMAIC and System Engineering tools. Manage FAIR/MSA activities and Source & method change in the cell/area of accountability.
• Delivery – Review issues identified e.g. Troubleshoot Strip / Build, Balancing, Runout, In-situ repair, Component Repair processes and key equipment/toolings (ITT, VTL, BTG, Wash, FTB, CMM, etc), determine resolutions and reestablish the Standards.
• Cost – Support cell/area of accountability to meet cost targets e.g. productivity, CONQ etc.
• Standards – Deploy and sustain the SAESL Operating System Standards by working with the Cell/Area CFT, and where applicable with the suppliers. Identify opportunity to improve the Standards.
• Technical Authority – Specify Manufacturing Engineering and process requirements and make technical decisions in relation to the cell/area of accountability.
• Lean/Improvement – Identify requirements for improvements and innovations in manufacturing processes and methods of manufacture within their cell/area of accountability. Prioritise and promote launch of new projects based on business case. Drive manufacturing processes towards identified best practice.
• Deploy capability (including NPI) – Responsible for production readiness of new product manufacturing capabilities or methods of manufacture. Develop numerate, real time methods for capturing process capability, and ensure it is available and acted on within the facility/supply chain. Maintenance of Production Technical Packages (technical instructions, programmes, tooling, etc) for all parts/assembles which clearly define the manufacturing process ensuring manufacturing processes and/or methods of manufacture meets the requirements for quality, cost, delivery rate and lead time

Requirements

• Degree in Aeronautical / Manufacturing / Mechanical / Industrial Engineering discipline (Candidates with Diploma in Aeronautical / Manufacturing / Mechanical / Industrial discipline and relevant experience may be considered).
• Fresh graduates may be considered.
• Good knowledge of high bypass gas turbine engines.
• Good knowledge of material and component repair processes (e.g. Welding, Machining, Painting, Coating, etc).
• Good communication, analytical, engineering and project management skills.
• Good technical problem-solving skills (Six Sigma) and hands-on approach.

At FLEXXON, we foster a culture of innovation, creativity, and inclusivity. You'll have the opportunity to work alongside talented individuals who are passionate about making a difference. We offer a dynamic and supportive work environment that encourages professional growth and recognizes your achievements.

If you are excited about the prospect of taking on new challenges, making an impact, and contributing to the success of our products, we would love to hear from you.

Responsibilities:

• Present product and solution in response to customer enquiries and problems
• Market research, analysis and competition to formulate product strategy
• Design and manage product communications including external and internal feature announcements, use case, reference materials and press releases
• Manage storage products, and responsible for the whole process from demand, spec, design, development, testing to mass production
• Analyze, troubleshoot and resolve issues.
• Work with R&D and other cross-functional counterparts to drive development of advanced features and technology

• Degree/Diploma in Electronics Engineering, Computer Engineering, Microelectronics or related major
• Good presentation and communication skills, excellent in written and spoken English and Chinese
• 3-5 years of product or project management experience
• Familiar with Windows and Linux operating system preferably, if have
• Ability to work independently and as a team, with strong analytical and multitasking skills

About SAESL

A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.

• World’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL

• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

Responsibilities

• Manage the acquisition, delivery and commissioning of capital equipment, turnkey solutions and ancillary fixtures/ tooling
• Industrialize additive manufacturing capability through the development of new process and procedures
• Manage the transfer of new products and know-hows from pre-production site to manufacturing site for mass production. Successful candidate will be expected to be posted overseas for training and technology transfer
• Implement and deliver new repairs by designing and fabricating new repair fixtures/ tooling; developing process parameters; and validating repair setup through First Article Inspection
• Provide technical assistance to all functional departments to meet business objectives
• Effectively apply process control (SPC) to monitor, analyze and define errant processes; and to refine processes to reduce variability
• Function as on-site technical authority and liaise with technical specialists for laser-related processes.
• Lead and own laser blown powder deposition activities
• Any other duties as assigned by supervisor

Requirements

• Bachelor's Degree in Manufacturing, Material Science, Mechanical Engineering or related field
• Possess knowledge (theory and practical) on laser cladding (solid state lasers and blown powder laser) and metallurgical characterization
• Understanding of common component repair processes (welding, heat treatment, machining, NDT) and familiarity with digital manufacturing and/or proficiency in CNC programming is an advantage
• Experience in beam characterization using commerically available equipment
• Ability to read and understand manufacturing drawings and GD&T
• Able to multi-task and work well under pressure as an individual/ team
• Possess good communication, analytical , engineering and project management skills
• Good technical problem solving skills, takes ownership and hands-on approach

About SAESL

A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.

• World’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL

• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

Responsibilities

• Manage the acquisition, delivery and commissioning of capital equipment, turnkey solutions and ancillary fixtures/ tooling
• Industrialize adaptive manufacturing capability through the development of new process and procedures
• Manage the transfer of new products and know-hows from pre-production site to manufacturing site for mass production. Successful candidate will be expected to be posted overseas for training and technology transfer
• Implement and deliver new repairs by designing and fabricating new repair fixtures/ tooling; developing process parameters; and validating repair setup through First Article Inspection
• Provide technical assistance to all functional departments to meet business objectives
• Effectively apply process control (SPC) to monitor, analyze and define errant processes; and to refine processes to reduce variability
• Function as on-site technical authority and liaise with technical specialists for CAM and non-contact measurement related repair processes.
• Lead and own CAM and non-contact measurement activities
• Any other duties as assigned by supervisor

Requirements

• Bachelor's Degree in Manufacturing, Material Science, Mechanical Engineering or related field
• Possess knowledge (theory and practical) on digital manufacturing and conventional machining
• Experience in operating non-contact measurement equipment and Siemens NX multi-axis manufacturing module
• Understanding of common component repair processes (welding, heat treatment, NDT) and familiarity with digital manufacturing and/or proficiency in CNC programming is an advantage
• Ability to read and understand manufacturing drawings and GD&T
• Able to multi-task and work well under pressure as an individual/ team
• Possess good communication, analytical , engineering and project management skills
• Good technical problem solving skills, takes ownership and hands-on approach

RESPONSIBILITIES

Manufacturing/ Production Line setup, pre-qualification and maintenance.
Provide technical support to customer related to assembly/ manufacturing.
Develop process and generate work instruction.
Review drawing, customer specifications and Bill of Materials cleanup.
Assembly, test, and commissioning of highly automated industrial equipments.
Train, certify and monitor assembly technicians.
Develop necessary technical competencies and equipment capabilities to meet operational performance targets
Work and collaborate with Production to achieve the desired quality and output
Conduct MRB to review non-conformance parts disposition.
Design/Fabricate tools, jigs and fixtures.
In-process yield/reject/scrap rate monitoring.
Lead and drive the team to participate in all continuous improvement projects related to cost, quality, utilisation & productivity using Six-sigma or similar applicable technology such as Cpk, FMEA, Lean etc
Any other duties assigned by his/her superior / Manager.

REQUIREMENTS

Minimum three years of relevant experience in Equipment Manufacturing Industry preferably wire bonding Equipment (Ball Bonding/Wedge Bonding/Die Bonding)
Diploma in Mechanical/Mechatronics/Electrical Engineering or equivalent
Proficiency in equipment troubleshooting techniques
Strong problem solving and analytical skills with good knowledge of SPC
Good leadership / presentation / communication / team building skills
Ability to work proactively and to identify issues and propose solutions
Able to design and implement effective systems, processes and informatio/ reporting mechanisms
Experience in Lean Manufacturing and ISO system

Please indicate your current and expected remuneration.

Key Responsibilities

1. Develop new procedures and Best Known Methods (BKMs) to service new products. Contribute to the FMECA process.
2. Participate in or own first chamber Build & Test in Apps lab. Solve issues, or work with Engineering to address issues identified. Work with Manufacturing to develop procedures and participate (if required) on New Product final test
3. Partner with Quality & Reliability (Q&R) group to review and address Top Field Issues. Participate in or own CAPA process. Conduct or facilitate Failure Analysis (FA) if needed
4. Develop and document procedures to install (start-up), retrofit and maintain the product (Technical Product Manuals)
5. Develop new procedures, Customer Engineering Notices (CENs), Internal Service Bulletins (ISBs) and troubleshooting guides as required
6. Collect process and qualification data to create product Best Known Methods (BKMs)
7. Develop initial training package for new products and work with Global Technical Training (GTT) to develop training class. Train Customer Engineers (CEs), Process Engineers (PSEs) and Technical Product Support (TPS) assigned to customers who will receive ELS Shipments, prior to shipping
8. Identify new parts that require to be stocked by AGS and work with them to ensure parts are stocked in correct locations

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines

Business Expertise

• Has knowledge of best practices and how own area integrates with others; is aware of the competition and the factors that differentiate them in the market

Leadership

• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements

Problem Solving

• Solves complex problems; takes a new perspective on existing solutions; exercises judgment based on the analysis of multiple sources of information

Impact

• Impacts a range of customer, operational, project or service activities within own team and other related teams; works within broad guidelines and policies

Interpersonal Skills

• Explains difficult or sensitive information; works to build consensus

Key Responsibilities

• Develops and applies quality standards in accordance with company and customer requirements. Develops and conducts related tests.
• Develops and uses procedures. Prepares documentation for inspection/ testing procedures. Recommends corrective action for procedural, product, or process deficiencies.
• Analyze operational data; Develop and implement recommendations. Participates in and may lead audits.
• Evaluates work methods, procedures and policies. Tracks progress of qualification status, reviews reliability test results, determines disposition of non-compliant products, reviews and releases qualification packs.
• Utilizes drawings, specifications, industry standards, and sketches, adapting inspection measuring devices and procedures when necessary. Read and interpret technical drawings and specification requirements.

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines.

Business Expertise

• Has knowledge of best practices and how own area integrates with others; is aware of the competition and the factors that differentiate them in the market.

Leadership

• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements.

Problem Solving

• Solves complex problems; takes a new perspective on existing solutions; exercises judgment based on the analysis of multiple sources of information.

Impact

• Impacts a range of customer, operational, project or service activities within own team and other related teams; works within broad guidelines and policies.

Interpersonal Skills

• Explains difficult or sensitive information; works to build consensus.

Job Description

Key Responsibilities

1. Helps to coordinates project activities. Will update matrix for process improvements.
2. Assists in the coordination of project schedule and task details Helps prepare reports and tracking charts,
3. Will track the progress of resources within the business unit to meet project on-time and budget performance objectives.
4. Prepares request for quotes (RFQ). Coordinates completion of the in-use and Final Sign-off (FSO) milestones with all parties.
5. Revises non-technical aspects of the Statement of Work (SOW).
6. May communicate with internal customers to determine progress against project objectives. Under supervision reports progress against stated objectives.

Functional Knowledge

• Demonstrates conceptual knowledge of theories, practices and procedures within a discipline

Business Expertise

• Applies general knowledge of business developed through education or past experience

Leadership

• No supervisory responsibilities; accountable for developing technical contribution

Problem Solving

• Uses existing procedures to solve standard problems; analyzes information and standard practices to make judgments

Impact

• Has limited impact on own work team; works within standardized procedures and practices to achieve objectives and meet deadlines

Interpersonal Skills

• Exchanges straightforward information, asks questions and checks for understanding

Essential Responsibilities:

• Design/develop/substantiate/implement new repairs
• Ensure internal shop documents are kept current with the latest repair documents and flow changes to appropriate personnel
• Generate, change/update OP sheets, routers
• Track or collect data on yield and identify opportunities to improve yield; conduct new material tryouts; review process for improvements.
• Conduct salvation reviews
• Raise and follow thru with Departure Records approval, work with REDO or GEAE engineers to enhance tech issue resolution process
• Plan and manage product transition related activities
• Provide work scope for customers, draft responses to customers’ queries
• Investigate and answer QPR/CARs
• Where applicable, act as subject matter expert to design and develop appropriate OJT for shop CRTs
• Engagement in Six Sigma, bullet train activities; lead cluster activities
• Up-to-date technical/engineering documents and new business opportunities for company
• Ensure up-to-date manuals are deployed for use – compliance.
• Proper flow down of technical operating documents for CRT use.
• Up-to-date technical/engineering documents and new business opportunities for company.
• Ensure up-to-date manuals are deployed for use – compliance.
• Proper flow down of technical operating documents for CRT use.
• Customer benefit for business growth, productivity for shop.
• Customer benefit, yield improvement and additional business for organization.
• Ensure technical issues are resolved expeditiously for business.
• Ensure proper technical qualifications are completed for either transitions in or out of GEASO.
• Customer interface; know customer requirements.
• Compliance/Customer Satisfaction – timely response & closure.
• Skills development & enhancement for shop CRTs.
• Support business productivity & cost efficiency drive efforts.

Qualifications/Requirements:

• Bachelor's degree in Mechanical/Aerospace or related Engineering fields.
• 3-5 years of experience in manufacturing environment is required.
• Aviation maintenance repair and/or overhaul environment preferred.
• Relevant internship experience is highly desirable.

Desired Characteristics:

• Strong oral and written communication skills.
• Strong interpersonal and leadership skills.
• Ability to work independently.
• Strong problem solving skills.
• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes, critical thinker

Responsibilities

• Develops, implements, and maintains methods, operation sequence and processes in the fabrication of parts, components, sub-assemblies and final assemblies
• Interfaces with other engineering functions to coordinate the release of product improvements and/or new products
• Launches, releases, approves and implements or issues engineering change requests as required to support design engineering and Operations with new and existing products
• Uses basic engineering and DFx principles to estimate and reduce manufacturing and/or product costs and improve delivered product quality; determines time standards and makes recommendations for tooling and process requirements
• Writes and releases test procedures
• Gathers operational and test data and evaluates results
• Evaluates work methods, procedures and policies
• Assists in determining root cause analysis for issues that arise during assembly and/or test of systems

Requirements

• Bachelor in Engineering
• Demonstrates conceptual knowledge of theories, practices and procedures within a discipline
• Applies general knowledge of business developed through education or experience
• Uses existing procedures to solve standard problems; analyzes information and standard practices to make judgments
• Works within standardized procedures and practices to achieve objectives and meet deadlines
• Exchanges straightforward information, asks questions and checks for understanding

* Please apply with detailed CV with current and expected salary, and notice period

* Only shortlisted candidates would be notified

Key Responsibilities

Develops, implements, and maintains methods, operation sequence and processes in the fabrication of parts, components, sub-assemblies and final assemblies.

Interfaces with other engineering functions to coordinate the release of product improvements and/or new products. Launches, releases, approves and implements or issues engineering change requests as required to support design engineering and Operations with new and existing products.

Estimates manufacturing costs, determines time standards and makes recommendations for tooling and process requirements. Uses DFx principles to reduce manufacturing and/or product costs, and improve delivered product quality.

Develops and uses test procedures, including assisting with the definition of test specifications with design / software engineering. May work with test engineering on the design and development of text fixtures. May assist in the coordination of test fixture sourcing activities.

Gathers operational and test data and evaluates results; may takes corrective/continuous improvement actions.

Evaluates work methods, procedures and policies. Participates in the development and maintenance of new and existing business processes; updates as necessary to ensure current practices are documented.

Determines root cause and corrective action analysis for issues that arise during assembly and/or test of systems; provides failure analysis report as required.

Performs Process Failure Mode, Effects and Criticality Analysis when working with New Product Development.

Functional Knowledge

• Demonstrates expanded conceptual knowledge in own discipline and broadens capabilities

Business Expertise

• Understands key business drivers; uses this understanding to accomplish own work

Leadership

• No supervisory responsibilities but provides informal guidance to new team members

Problem Solving

• Solves problems in straightforward situations; analyzes possible solutions using technical experience and judgment and precedents

Impact

• Impacts quality of own work and the work of others on the team; works within guidelines and policies

Interpersonal Skills

• Explains complex information to others in straightforward situations

About SAESL

A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.

• World’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL

• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

About the role

Perform the Manufacturing Engineering activity in Engine Overhaul/Component Repair production areas. Act as Technical Authority, assuring the initial and continuing capability of the Production method to produce conforming product and ensuring the resolution of technical issues/problems/arisings to meet business and customer requirements for safety, cost, delivery rate and leadtime (SQCD). Support integration on all Manufacturing Engineering activities across the product lifecycle and through the supply chain.

Job Description

• HSE – Practice full compliance to Health, Safety & Environmental Standards and meet the expectations of the Zero Harm programme.
• Product Safety – Understand product safety risks and work on mitigation to meet the required safety levels supporting requirements of the Company’s Safety Management System.
• Quality – Practice a culture of zero defects ensuring that manufacturing processes and methods within the business are developed and deployed to support Right First methodology. Support process and product related Quality investigation, and manage NADCAP accreditation.
• Delivery – Ensure that manufacturing processes and methods of manufacture within the business and suppliers are developed and deployed to support/deliver Right First Time manufacture using SPS, DMAIC and System Engineering tools. Manage FAIR/MSA activities and Source & method change in the cell/area of accountability.
• Delivery – Review issues identified e.g. Troubleshoot Strip / Build, Balancing, Runout, In-situ repair, Component Repair processes and key equipment/toolings (ITT, VTL, BTG, Wash, FTB, CMM, etc), determine resolutions and reestablish the Standards.
• Cost – Support cell/area of accountability to meet cost targets e.g. productivity, CONQ etc.
• Standards – Deploy and sustain the SAESL Operating System Standards by working with the Cell/Area CFT, and where applicable with the suppliers. Identify opportunity to improve the Standards.
• Technical Authority – Specify Manufacturing Engineering and process requirements and make technical decisions in relation to the cell/area of accountability.
• Lean/Improvement – Identify requirements for improvements and innovations in manufacturing processes and methods of manufacture within their cell/area of accountability. Prioritise and promote launch of new projects based on business case. Drive manufacturing processes towards identified best practice.
• Deploy capability (including NPI) – Responsible for production readiness of new product manufacturing capabilities or methods of manufacture. Develop numerate, real time methods for capturing process capability, and ensure it is available and acted on within the facility/supply chain. Maintenance of Production Technical Packages (technical instructions, programmes, tooling, etc) for all parts/assembles which clearly define the manufacturing process ensuring manufacturing processes and/or methods of manufacture meets the requirements for quality, cost, delivery rate and lead time.

Requirements

• Degree in Aeronautical / Manufacturing / Mechanical / Industrial Engineering discipline (Candidates with Diploma in Aeronautical / Manufacturing / Mechanical / Industrial discipline and relevant experience may be considered).
• Fresh graduates may be considered.
• Good knowledge of high bypass gas turbine engines.
• Good knowledge of material and component repair processes (e.g. Welding, Machining, Painting, Coating, etc).
• Good communication, analytical, engineering and project management skills.
• Good technical problem-solving skills (Six Sigma) and hands-on approach.

About SAESL
A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.
• World’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL
• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

Responsibilities
• Manage the acquisition, delivery and commissioning of capital equipment, turnkey solutions and ancillary fixtures/ tooling
• Industrialize adaptive manufacturing capability through the development of new process and procedures
• Manage the transfer of new products and know-hows from pre-production site to manufacturing site for mass production. Successful candidate will be expected to be posted overseas for training and technology transfer
• Implement and deliver new repairs by designing and fabricating new repair fixtures/ tooling; developing process parameters; and validating repair setup through First Article Inspection
• Provide technical assistance to all functional departments to meet business objectives
• Effectively apply process control (SPC) to monitor, analyze and define errant processes; and to refine processes to reduce variability
• Function as on-site technical authority and liaise with technical specialists for CAM and non-contact measurement related repair processes.
• Lead and own CAM and non-contact measurement activities
• Any other duties as assigned by supervisor


Requirements
• Bachelor's Degree in Manufacturing, Material Science, Mechanical Engineering or related field
• Possess knowledge (theory and practical) on digital manufacturing and conventional machining
• Experience in operating non-contact measurement equipment and Siemens NX multi-axis manufacturing module
• Understanding of common component repair processes (welding, heat treatment, NDT) and familiarity with digital manufacturing and/or proficiency in CNC programming is an advantage
• Ability to read and understand manufacturing drawings and GD&T
• Able to multi-task and work well under pressure as an individual/ team
• Possess good communication, analytical , engineering and project management skills
• Good technical problem solving skills, takes ownership and hands-on approach

Apply Here --> https://saesl.applyourjobs.com/