Total 1,385 Maintenance / Repair job vacancies in jurong north west

Requirements:

• To operate and maintain plant facilities and utilities.
• Responsible for continuously supplying purified water, chilled water, PUB water, steam, compressed air, etc.
• Responsible for continuous treatment of process wastewater and ensuring compliance with the discharge of treated water to the public sewage system.
• Responsible for continuously operating building services, including HVAC, ACMV, electricity, etc.
• Responsible for facilities & utilities equipment front-end troubleshooting.
• Responsible for carrying out or coordinating with vendors on asset repairs, maintenance, calibration, or project works.
• Execute assigned work activities on time.
• Responsible for safe operation and good housekeeping in facilities and utility areas.
• Manage external contractors/vendors in support of operation and maintenance activities.
• Assist supervisor in preparing equipment for maintenance, performing equipment isolation, LOTO, and supporting permit-to-work issuance.
• To provide input or be involved in drafting GMP documents eg. SOPs, forms, etc.
• Provide support to improvement projects, audits, EHS & Quality investigations, and CAPA.
• To be involved in internal and external inspections as required.
• Ensure compliance with GMP, regulatory requirements, ISO and EHS standards, and other relevant policies/standards, and support audit functions.
• Ensure workplace safety and be responsible for notifying management promptly of EHS/GMP deficiencies.
• Any other duties and responsibilities as assigned by the Supervisor.

Requirements:

• Possess a Minimum of NITEC in a technical field of study.
• Minimum 3 years of experience in the electronics, cosmetic, food, medical, or pharmaceutical industry handling facilities or utilities.
• Boiler Attendant Class 2 certification is a MUST.
• Competence in purified water, chilled water, steam, compressed air, wastewater treatment, cleanroom HVAC operations, and maintenance.
• Self-motivated, good teamwork, and interpersonal skills.
• Able to execute work as per work instructions or procedures.
• Experience working in an EHS environment and a permit-to-work system.

Job Requisition

• Diploma/Degree in any field

• Critical thinker and problem solver

• Good communication, negotiation, and presentation skills

• Computer Literate

• Good interpersonal skills

• Able to multi-task and meet tight deadlines

• Experience in the cleaning industry is an advantage

• No prior experience is welcomed

Responsibilities

• Nurturing and developing relationships with key customer accounts

• Seek and identify opportunities to grow the business with new or existing customers via client visits and cold calling

• Create and be accountable for all client proposals, quotation or any further documentation

• Assist with additional tasks/initiatives as assigned

Benefits

• Transport & Mobile allowances

• Basic + Incentives

• Professional development

Key roles and responsibilities

• Water sampling pertaining to environmental testing based on scheduled and ad-hoc tasks assigned, in accordance to in-house SOP and established sampling techniques.
• Ensure proper documentation and records updating at the end of each working day
• Ensure safety and adhere to all Safe Work Procedures
• Must be contactable at all times when placed on standby duty

Skills & Experience

• ITE / Diploma in any discipline from any field.
• Entry Level are welcome as training will be provided.
• Able to write & communicate in English
• Must be physically fit, self-driven, team player with initiative, willingness to learn and good communication skills
• Able to work on rest day depending on job requirement
• Having Class 3 Driving Licence is essential

Benefits

• 5 days' work week
• Transport provided
• Attractive salary package
• Medical benefit
• Career development plan through continuous and structured training program (employment bond is applicable for specialised training courses)
• Standby allowance for urgent work activation
• Handphone Reimbursement

Job Description

Report to Workshop Manager and Assistant Service Manager, responsible for performance of all automotive related repairs in achieving the Departmental sales turnover objectives with fast turnaround of customer vehicles and meet quality standard.

Job Scope

• Perform automotive service, repairs and OEM installation as per repair order instructions according to manufacturer's required procedures and quality standard.
• Diagnose and trouble fault on system components of the vehicle.
• Record all jobs done to the vehicle on repair done.
• Notify any addition fault or defect found in the repair process to Workshop Supervisor and obtain appropriate approval before proceeding with the repair .
• Ensure customer vehicles are cleaned after being repaired.
• Perform daily shop floor housekeeping.

Qualification Requirements

• Minimum qualification : N level / NITEC in Motor Vehicle mechanics.
• Minimum 1 year experience in Motor Vehicle Service and Repair for Diesel Engines.
• Valid Class 3 license added advantages.

Assist ROV team

- Hydraulic/Mechanical/Electrical support (Setting up, troubleshooting, repairs etc)

- Support R&D activities to develop, fabricate and build/upgrade new/existing ROVs

- Support data recording activities on jobs

- System launch and recovery

- Housekeeping

- Ability to work outdoor, on-board ships, possess a level of physical fitness appropriate to the job requirements, and able to work based on operations schedules.

- To assist with ROV operations as instructed and in accordance with approved procedures and QHSE policies.

- Possess Class 3 driving license will be an advantage

Our client, a well established medical device company is currently looking for a Production Technician to join their team.

Salary: up to $2,500 + Overtime Pay + Transport Allowances $150
Work Days: 5 Days (8am to 4:45pm from Mon to Fri)
Work Location: Boon Lay

Job Duties:
• Perform all production activities at various stages and to work as a team to achieve production targets in accordance with ISO Quality Management System and applicable safety standards.
• Weighing, mixing, filter preparation, filling and packaging.
• Completion of all associated production records in accordance with good documentation practices.
• Transfer of raw and packaging materials as well as finished products.
• Perform house-keeping and first-level trouble-shooting of equipment as needed.
• Equipment and area cleaning on regular intervals.
• Comply with all safety and environmental regulations.
• Work on continuous improvement initiatives within Production.
• Handle non-routine duties as assigned by senior technicians or Production supervisor.

Requirements:
• Min GCE O Level / Nitec in production, preferably in Industrial Engineering
• Min 3 years of related working experience, preferably in chemical process related industry / production factory
• Computer literate (MS Office) and knowledge of Chemistry preferred
• Responsible, reliable and able to work independently as well as a team player

Please submit your resume in MS Word format to [email protected]

Please remember to include your
1) Recent photo
2) Salary information
3) Notice period

UNITED PERSONNEL SERVICES
21 Bukit Batok Crescent
#11-74 WCEGA Tower
Singapore 658065
Tel: +65 6565 1939
www.united-personnel.com

EA Licence Number: 05C5278
Registration No.: R1103477

(All applications will be treated in strictest confidence. We regret that only shortlisted candidates would be notified)

ALATAS Crane Services Worldwide is a worldwide operating crane service specialist and offers crane related services and parts supply in the Ship-, Offshore-, and Construction industry.

With our global set-up of 14 offices worldwide, we offer field service, provide technical solutions for emergency repairs, large scale overhauls, load testing, inspections, component repairs, spare parts supply as well as supply of new cranes and upgrades to existing ones.

Our specialized Crane Service Engineers are professionals in their field and are available attend to crane problems throughout the world.

We also operate a repair workshop for hydraulic- & mechanical components, such as hydraulic pumps, motors, cylinders, gearboxes and other crane components.

To support our crane servicing department, we are employing experienced Workshop Technician as follows:

JOB DESCRIPTION:

• Assemble, dismantle, service & repair of Marine pumps and machinery parts
• Steel repairs on Grabs, Windlasses & other Deck Machinery Parts
• Afloat repairs on Deck Machinery & Cranes

REQUIREMENTS:

• NTC 3 (or higher) in Mechanical Engineering or equivalent
• Strong technical knowledge of at least 3 years of experience in the assemble, dismantle, service & repair of Marine pumps and machinery parts (is a must)
• Welding qualifications will be an added advantage
• Pro-active team player, with the right working attitude and willing to work overtime

ALATAS Crane Services Worldwide is a worldwide operating crane service specialist and offers crane related services and parts supply in the Ship-, Offshore-, and Construction industry.

With our global set-up of 14 offices worldwide, we offer field service, provide technical solutions for emergency repairs, large scale overhauls, load testing, inspections, component repairs, spare parts supply as well as supply of new cranes and upgrades to existing ones.

Our specialized Crane Service Engineers are professionals in their field and are available attend to crane problems throughout the world.

We also operate a repair workshop for hydraulic- & mechanical components, such as hydraulic pumps, motors, cylinders, gearboxes and other crane components.

To support our crane servicing department, we are employing experienced Workshop Technician as follows:

JOB DESCRIPTION:

• Assemble, dismantle, service & repair of Marine pumps and machinery parts
• Steel repairs on Grabs, Windlasses & other Deck Machinery Parts
• Afloat repairs on Deck Machinery & Cranes

REQUIREMENTS:

• NTC 3 (or higher) in Mechanical Engineering or equivalent
• Strong technical knowledge of at least 3 years of experience in the assemble, dismantle, service & repair of Marine pumps and machinery parts (is a must)
• Welding qualifications will be an added advantage
• Pro-active team player, with the right working attitude and willing to work overtime

Job Highlights

• Immediate Hiring
• Lunch provided
• Short walking distance from Tuas Link MRT Station

Job Description

• Maintenance of all new and existing equipment within Company and manufacturing area.
• Schedule and perform planned and unplanned maintenance activities through Total Preventative Maintenance (TPM) systems.
• Documentation of all maintenance activities ensuring traceability in accordance with Good Manufacturing Practice (GMP) and Company requirements.
• Observe and comply with company sequence of operations (SOO’s), standard operating procedures (SOP’s), and emergency operating procedures (EOP’s).
• Procurement of third-party services, e.g., specialist contractors, production equipment vendor, electrical and refrigeration engineers and parts.
• Supervise suppliers / contractors who are on site to ensure that all maintenance work is carried out in accordance with the contract, regulatory requirements and company Standard Operating Procedures (SOP’s).
• Maintenance of utilities equipment’s such as AHU chiller, ACMV, air-compressor, water heater, electrical and electronic system.
• Perform risk assessments for all facilities activities annually.
• Maintain of records, prepare reports and compose correspondence relative to the work.
• Any ad-hoc duties as assigned by the management.

Job Requirements

• Minimum NITEC in Facility Management, Electrical or Mechanical.
• At least two years of relevant experience.
• Proficient in Microsoft (MS) Excel and Word.
• Knowledge of PLC understanding and diagnostic.
• Ability to multi-task and prioritise jobs to meet tight deadlines and required targets.
• Self-motivated, meticulous, organized and a good team player.

JOB DESCRIPTIONS:
1) Receive raw material and ensure traceability maintained.

2) Study drawings/specifications and prepare inspection sheet,

3) Study drawing, specification to ensure that machine, fixture, tools and inserts used are suitable.

3) Perform precision machining as and when required.

4) Perform machine check and report its status.

5) Perform precision machining conforming to specified requirements.

6) Perform first piece inspection and record result.

7) Perform in process inspection and record result.

8) Report non- conformance, if any.

9) Upon completion of the job report daily production status.

10) Ensure all parts were properly protected from atmosphere corrosion.

11) Maintain measuring equipment and tool properly.

12) Maintain good house-keeping at all time.

13) Maintain safe and healthy work environment.

14) Ensure daily production record form are correctly submit daily.

15) Direct and coordinate the activities engaged in production or processing of components.

16) Assist plan shop activities as per production schedule and updating the production schedule.

17) Initiate, recommend and provide guidance to improve machining process.

18) Initiage investigation root cause of product non-conformance.

19) Any other duties that is assigned by superior as and when is required.

REQUIREMENTS

1) Interpretation of drawing, Setup Sheets.

2) Experience in operating of CNC Machine/ Turnmill / CNC Milling/ CNC lathe/ Borer.

3) Measurement skill.

4) Handling of company ERP system.

5) Able to direct and coordinate production activities.

6) Able to perform investigation root cause of product non-conformance.

7) Able to train new machinist on machining requirements, tooling and lifting equipment usage.

8) Min 3 years in CNC machining.

Technical coordinators provide basic administrative and light tech support services to assist with a project or the operation of a department. They often handle routine paperwork, data entry, preparing and processing of documents, and responding to general requests for information. They also assist with the creation of spec sheets, promotional collateral, and other materials. They may assist with billing, inventory, and logistical tasks, as well, and often relay information and materials between departments or individuals.

Purpose of the Position

Reporting to the Shift Supervisor, the Process Technician's primary responsiblity is to ensure the smooth operation of his/her assigned Process Unit, be it in either the Field or DCS Panel Operation.

Job Description

DCS Operation

• Perform starts up and shuts down according to Standard Operating Procedures, Work Instructions or Checklists.
• Monitor and control process variables via DCS (towers, reactors, driers, compressors, etc) to maintain quality & plant in steady & efficient condition.
• Respond to process alarms, process upsets or abnormal process conditions according to established practices and procedures in order to begin or cease production as advised by Supervisor or Engineers.
• Troubleshoots equipment and/or process problems in order to identify needed corrections or improvements.
• Initiate and perform Safety bypass with approval from Supervisor.

Field Operation

• Performs equipment line-ups and operate towers, reactors, driers, compressors, pumps, etc according to established practices and procedures.
• Responds to upsets or abnormal process conditions according to instructions from Supervisor or Panelman.
• Troubleshoots equipment and/or process problems in order to identify needed corrections or improvements.
• Collect process samples from assigned sampling points in a safe manner.
• Equipment Inspection Tours according to checklist.

Requirements

• NITEC in Chemical Process Technology /Diploma in Chemical Engineering or related discipline.
• Min. 1-2 years Operational experience with demonstrable exposure to Process Plant Operations and site-based activity or equivalent.
• Experience in Safety Awareness programs or involvement in Safety Committees will be an added advantage.

• Inspects specific assemblies, onboard boiler repair, deck panels, and coverings, for conformance to dimensional specifications and quality standards, using level, square, and measuring instruments and applying knowledge of carpentry.
• Responsible to issue PTW for all site work
• Responsible and accountable to follow all Safety Procedures of the site.
• Performs In process sampling and testing.
• Performs simple maintenance jobs in accordance with safety requirement.
• Preparation of equipment for lock out tag out (LOTO), filter change outs etc.
• Report all accident, injury, near miss, unsafe conditions, and behaviour to immediate supervisor so that remedial actions can be taken to eliminate risk.
• Ensure utilities and facilities problems are identified and repaired quickly.

Job Description:

• Ensure the machine is working correctly, and calibrating the machine to ensure proper measuring.
• Perform incoming, in-process and final inspection as per customer requirement.
• Maintain calibration record of measuring equipment.
• Document inspection results by completing reports and logs.
• Maintain safe and healthy working environment by following standards and procedures.
• Raise non-conformance report if necessary.

Job Requirements:

• NITEC/Higer NITEC in Precision Engineering.
• 2 -3 years of relevant QC experience in a manufacturing environment and knowledge.
• Able to interpret technical/mechanical drawings of geometrical dimensioning and tolerance.
• Able to perform CMM measurement; preferably with Wenzel or Zeiss.

• Up to $2300
• 5.5 days Work per Week
• Monday – Friday (8.30am – 6pm), Saturday (8.30am – 1pm)
• Multiple work Locations available

Responsibilities:

• Perform maintenance, repairs, and servicing tasks across Electrical, Air Conditioning, Mechanical, Building, and General Repairs.
• Execute preventive, corrective, and breakdown maintenance for M&E works, air conditioning, or building infrastructure.
• Conduct facility or building maintenance, including troubleshooting and repairing mechanical, electrical, and plumbing systems.
• Promptly address defects and customer complaints, responding efficiently to fault reports, client requests, and breakdowns.
• Carry out regular maintenance and repairs on building facilities and systems to ensure smooth operations, reporting any issues to the supervisor.
• Perform preventive inspections and troubleshoot M&E systems.
• Record and inform the supervisor of any faults or issues found during routine checks.
• Complete any additional ad hoc duties as assigned.

Additional Information:

• 1-2 years experience and above in Facilities Maintenance or Engineering company
• Minimum NTC/ ITE/ NITEC/ HIGHER NITEC/ VOCATIONAL CERTIFICATE in Mechanical / Air-Con / Electrical / Electronics /Building / Facility Management or facilities maintenance

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Raymond Ng Jun Han | EA Personnel No.: R1657009

Key Accountabilities:

• Undertake the assignments on one's own such as commissioning, installation, maintenance, trouble-shooting and repair/overhaul for MTU engines and associated product
• Capable of resolving technical matters and completing services according to the works order for acceptance by the customers.
• Conduct acceptance test of equipment and systems with customers or customer representatives.
• Carry out repair/adjustment if required.
• Provide service/investigation reports where applicable.
• Prepare and submit travel report on work progress as well as completion of project.

Requirements:

• Minimum Diploma/Degree in Mechanical or Marine Engineering.
• At least 2 – 3 years of experience in the diesel engine/generator industry.
• Experience in troubleshooting, project handling/execution, servicing and commissioning.
• Communicates effectively, has a strong initiative and ability to work under pressure.
• Possess logical and analytical skills
• Highly independent, and an excellent team player.

Job Description:

- Setting up, maintaining and regular lubrication of machines.

- Run production to produce required output.

- Carry out effective in – process inspection

- Carry out adjustment of tooling and change of worn out tooling.

- Trouble shooting of production problem.

- Daily housekeeping.

- Training of operators & new staff

Job Requirements:

- Nitec in mechanical or electrical background preferred

- Able to comply to safety procedures.

-Must be able to lift heavy objects

- Able to commit to work shift work

• Up to $2500
• 5.5 day work per week
• Tuas

Responsibilities:

• Perform maintenance and repairs on crane and hoist systems to ensure optimal performance.
• Diagnose and repair mechanical and electrical issues efficiently.
• Assist with the installation of new crane and hoist systems per safety standards.
• Conduct load testing to verify system safety and document results.
• Ensure all work complies with safety regulations and company policies.

Additional Information:

• Candidate possess with electrical and crane/hoist servicing basic knowledge will be added advantage
• Required to WORK AT HEIGHT.
• Willing to learn, positive work attitude and good team player.
• Willing to work overtime when required. OT available.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Raymond Ng Jun Han | EA Personnel No.: R1657009

Job Description

· Operate high-end automated printing machine for quality output and timely delivery

· Run the printing press according to production plan

· Examines printed results for ink density, accuracy of design and registration conforming to required artwork

· Perform first level analysis and optimize the set-up between the printed sheets

· Conduct periodic autonomous preventive maintenance as scheduled

· Manage daily housekeeping

Job Specification

· Candidates with more experience will be consider for leader role

· Min 2 years of relevant experience in the printing industry

· Able to work rotating shift in west area

Job Description / Responsibilities:

• Comply with all health, safety and environment regulations and practices and work with management to address and resolve issues as they arise.
• Work with Maintenance Manager to prepare breakdown, preventive and shutdown maintenance plan, work schedules, and budget.
• Coordinate daily maintenance activities with Production section.
• Conduct daily toolbox meeting.
• Review work permits applied by contractors before submitting to Production for approval.
• Oversee all maintenance works including troubleshooting, and ensure that work is properly completed safely and timely.
• Maintain accurate records of maintenance activities, equipment history, and repair costs to track performance, identify opportunity for improvements and forecast future maintenance needs.
• Maintain adequate spare parts and equipment inventory, and ensure their proper storage.
• Inspect site to identify problems and necessary maintenance.
• Conduct risk assessment reviews with contract workers to ensure relevance and compliance.
• Liaise with professional engineer and service providers to conduct statutory equipment inspection and testing.
• Other duties as assigned.

Qualifications:

• At least Diploma in maintenance related field
• 1 to 2 years related experience
• Fresh graduates are welcome

Job Scope:

The successful candidates will be involved in the operations of the assigned process plant units involving work in the field and at the control panel:

• Perform field patrolling to monitor site conditions and take corrective actions to ensure safe and smooth plant operations
• Perform frontline trouble-shooting to address deviations, improve plant reliability & process safety
• Prepare equipment for maintenance and re-commissioning activities
• Ensure safe and smooth operation of plant facilities, such as exchangers, rotating equipments etc

Requirements:

• Diploma in Chemical Engineering / Chemical Process Technology, OR
• Nitec / Higher Nitec in Chemical Process Technology, OR
• GCE ’O’ Level with credits in Physics or Chemistry, and Mathematics
• Must be prepared to work on 3 rotating shifts

Element has an opportunity for a Laboratory Technician for sample preparation & testings. He/She also needs to assist chemist in laboratory testing, and on-site sampling (if required).

This role is based in Jalan Boon Lay, Singapore.

Job Duties:

• Prepare chemical mixture and reagents
• Treatment of wasterwater at trade effluent plant to ensure discharge compliance
• Clean and return of laboratory glassware
• Administrative dispatch, and filing & retrieval of documents
• Assist in simple analysis involving processes such as filtering and drying

Job Requirements:

• Diploma in Chemistry or equivalent
• Ablility to work in teams under pressure and a team player with initiative
• Highly motivated, organised individual and possess good communication skills
• Good attention to detail
• Ability to work independently and adhere to deadlines
• Knowledge & experience of testing equipment and operation is advantageous

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Job Description

• Put up technical statements and requirements for all aspects of Instrumentation, Control, and Automation (ICA) Works, including network development and associated field engineering works.
• Execute procurement functions, including strategic sourcing and supply contracting works.
• Communicate and work very closely with the Procurement Manager and ICA Head for preparation of the invitation of the request for Proposal and administering of the purchase requisition and award consent.
• Maintain and update all procurement documentation and records.
• Support the Instrumentation, Control and Automation Head of Department in budget monitoring.

Job Requirements:

• Diploma or Degree in Electrical, Chemical, or Environmental Engineering.
• Minimum of 3 years of working experience. Applicants with more than 8 years of working experience will be considered as Senior Procurement Executive.
• Experience in Environmental Engineering, particularly in water, wastewater treatment, and Waste-to-Energy (WTE) industries, with a focus on SCADA and DCS is preferred.
• Good oral and written command in English.
• Proficiency in Microsoft Office Suite, including Word, Excel, and PowerPoint.
• Experience with auditing procedures and compliance standards.
• Commercially orientated with good negotiation skill.

• To perform general maintenance duties in building & machineries & equipments.
• To perform preventive maintenance on machines & equipments bt cleaning, lubricating, greasing etc for optimization.
• To perform minior electrical work not requiring licence such as office lighting, appliances etc.
• To apply paint or varnish all types of surfaces for protection
• Perform related duties as required such as external support or repair
• To assist in recording facility utilities.
• To carry routine inspections on all operating machineries & equipments
• To ensure all ad-hoc work are carried out

Minimum ITE with relevant fields

Able to work as a team

Efficient and adhere to KPI's given

Conform to WSH guidelines

Work at height certificate a plus

* This is a 3 months Contract role (subject to extension/conversion) *

Key Responsibilities:

• Attend to daily facility preventive/corrective maintenance work
• Able to perform electrical work on lightings and auto doors
• Able to perform labour work such as roof top cleaning, drain cleaning, wall painting and minor wall plastering work.
• Ensure all practices are safe according to safety practices.

Job Requirements:

• Candidate should possess at least a NTC 3/ NITEC certification in Electrical, Mechanical or Facility Technology.
• Basic knowledge on plumbing, fire alarm system and air con system.
• Preferably to have scissor lift, boom lift and forklift licence.