Total 1,487 Maintenance / Repair job vacancies in sin01 singapore tuas west ave sin01

Job Description

• Assist in installation of dehumidifiers at residental/retail
• Deliver and collect dehumidifiers to and from sites as necessary
• Carry out repair works to faulty dehumidifiers at warehouse or on site
• Carry out servicing of dehumidifiers at clients site

Job Requirements

• Class 3 driving licence
• Physically fit- Will be required to lift heavy loads
• Forklift license
• Willing to learn
• Previous experience in air conditioning installation will be an added advantage
• Familiarity with common repair tools and equipments

Job Description & Requirements:

• PC / Notebook / AIO system diagnostic.
• Assist and advising customer the best solution for their repair / upgrade / customization.
• Handling of hardware and software installation.
• Training will be provided.
• Basic Salary + High Commission + Variable Performance Bonus
• 5 days/6 days work week
• Medical Benefits
• Staff Purchase Discounts

JOBS DESCRIPTION

• Discuss problems with car drivers or vehicle operators to discover faults
• Listen to engines, fit and operate special test equipment, and test-drive vehicles
• Repair or replace worn or faulty parts by removing assemblies such as engines, transmissions, differentials or steering gear; dismantling them and checking parts, referring to manuals as necessary.
• Reassemble, test, clean and adjust repaired or replaced parts or assemblies, using various instruments to make sure they are working properly and putting them back into the vehicle.
• Diagnose, repair and replace engine management and fuel injection components
• Additional duties as assigned by Supervisor.

JOB REQUIREMENTS

• Ability to work with minimum supervision
• Passionate in motor vehicles
• Humble and willing to learn
• Good working attitude
• Preferably with at least 2 years hands-on experience in Automotive Industry
• Possess Certificate in Motor Vehicle Mechanics or Automotive Technology would be an advantage
• Class 3 driving license would be an added advantage.

Send resume and expected salary to: [email protected].

Only selected candidates will be notified.

The Assistant Chemist/Lab Technician reports to the Lab Manager and is responsible for the below:

Responsibilities

Sample Preparation

• Receive and label all samples brought into the lab for accountability.
• Prepare samples from drying, crushing, splitting and pulverising.
• Mix fluxing reagents and load samples in furnace for the fire assay.
• Mix reagents for acid digestions.
• Perform fire assay techniques such as fluxing, fusing and cupellation of samples in correct numerical order.
• Perform smelting and sample extraction of precious metals as and when required

Recovery of Precious Metals such as Gold and Silver via Fire Assay techniques

• Assist with the recovery of precious metals such as Gold and Silver using Fire Assay techniques.

Measurement & Calibration

• Monitor analytical processes and take remedial action where deviations / discrepancies arise impacting on the quality of analytical results.
• Report any apparatus or equipment which, to your knowledge, is not functioning correctly to the Lab Manager

Perform Laboratory Data Analysis and Reporting

• Testing of precious metals scraps through cupellation method (fire assaying).
• Evaluate, validate, ensure and report technical accuracy of reporting analytical results
• Monitor analytical processes and take remedial actions where deviations / discrepancies arise impacting the quality of analytical results.
• Re-analyse analysis samples when control results are not within the acceptable range.

Quality Control

• Inspect samples, fusions, lead buttons and prills to ensure the assaying method is correct.
• Maintain records and accountability of materials (samples and standards) and equipment used.

Equipment Maintenance and Troubleshooting

• Report any apparatus or equipment which, to your knowledge, is not functioning correctly to the Lab manager.
• Assist in the procurement and placement of all consumables, equipment and fixtures.
• Assist in the general / preventive maintenance of equipment and housekeeping of the laboratory.
• Maintain and record equipment faults.
• Troubleshooting of analysis methods.

Laboratory Housekeeping

• Ensure and maintain work areas and equipment are clean, tidy and organised.

Compliance with Safety Protocols and Local Regulatory

• Assist with the application and maintenance of all necessary governmental licenses related to the laboratory.
• Promote and implement workplace safety initiatives.
• Ensure and maintain proper sample disposal of waste such as cupels and fire assay lead.
• Wastes or water generated as a part of daily work performed in a safe manner and in compliance with the disposal regulations and requirements.
• React appropriately and immediately to emergency situations and assists other employees in maintaining readiness to respond to emergencies within the workplace.

Job Requirement

Educational & Professional Qualifications

• Minimum Diploma qualification in Chemistry or its related field.
• Knowledge in safe handling of industrial chemicals.
• Possess effective verbal and written communication skills.
• Fearless of hot environment.
• Able to lift 10kg bars of precious metals.

Relevant Experience

• Problem solving skills.
• Have experience in selecting and setting up of equipment and processes to recover precious metals including gold, silver, platinum, palladium, rhodium is an advantage.
• Possess experience and the ability to operate ICP / XRF is an advantage.
• Must be willing to work overtime whenever necessary.

The Senior/Facilities Executive is responsible for ensuring the smooth and efficient operation of a facility, focusing on maintenance, safety, and operational needs. This role involves managing day-to-day facility activities, coordinating maintenance and repairs, and supporting a safe and productive environment for employees and visitors.

Key Responsibilities:

• Oversee daily facility operations, including maintenance, cleaning, and security.
• Coordinate and supervise contractors, vendors, and maintenance personnel for repairs and installations.
• Monitor and maintain facility equipment, ensuring proper functioning and regular servicing.
• Conduct routine inspections to ensure health, safety, and environmental standards are met.
• Manage facility inventory and supplies, ensuring availability of essential items.
• Respond to facility-related emergencies and issues promptly and effectively.
• Assist with budget preparation and manage expenses related to facility maintenance.

Qualifications:

• Diploma/Bachelor’s degree in Facilities Management, Business Administration, or a related field (preferred).
• Proven experience in facilities management or a similar role.
• Strong understanding of facility systems, including HVAC, electrical, and plumbing.
• Good organizational, communication, and problem-solving skills.
• Proficiency in facility management software and MS Office tools.

Job description

Serve as the primary point of contact for 1st and 2nd line IT support within Northern Marine Group, focusing on the Singapore office. Additionally, support the wider vessel support team by assisting with IT incident management and vessel-related projects. The role includes occasional travel within the Asia Pacific region to provide IT support on vessels and at site offices.

• React quickly and professionally to service desk incidents and requests that are submitted onshore and offshore via the Self Service Portal

• Responding to support requests for hardware such as, but not limited to, PC’s, Laptops, Mobile devices and Printers

• Responding to Service Requests that relate to, but not limited to, access/application/hardware requests, New Joiner/Leaver requests and standard requests that are submitted via the Self Service Portal.

• Provide knowledge base articles to be consumed by the end user – with the objective of reducing calls by empowering colleagues to search knowledge base for guidance/process or procedures prior to engaging the Service Desk.

• Collaborate with other Northern Marine IT teams to facilitate change and introduce new services to the business.

• Collaborate with Infrastructure Services Team for any incidents and changes aligned to network/storage hardware located in Singapore office

• Attend Vessels that have been brought into management/require refresh to facilitate installation/refresh of hardware.

• Identifying CSIP (Continuous Service Improvement Process) items that may improve how the Service Desk functions

• Ensure that the Asset Database is always maintained.

To be considered for this opportunity, candidates are expected to have a good understanding and awareness of the following technologies:

Networking and Hardware support

Desktop & Printer Hardware support

Windows 10 support

Server 2016/2019 Admin

Windows Server 2008/2012/2016 including AD, DNS, DHCP

Virtualization technologies such as Hyper-V and VMware

Wi-Fi Technologies (Unifi)

Active Directory Administration

Office 365 Admin

Remote access experience and remote support

Certifications in the following areas would be a significant advantage:

HNC/HND or equivalent experience in IT related subject

Job summary

Strong understanding of IT systems, including both hardware and software components. Proficiency in troubleshooting and resolving technical issues. and must be able to travel and board vessels as required for on-site support and maintenance.

KEY DUTIES AND RESPONSIBILITES:

• Perform various activities and tasks required in the tablet coating production areas.

• Operate all relevant equipment, clean, assemble and maintain the cleanliness of the equipment.

• Perform and maintain the documentation of operations in accordance with cGMP requirement.

• Operate the equipment appropriately in accordance with Standard Operating Procedure / batch document.

• Perform online monitoring of in process parameters / checks throughout the batch.

• Complete all relevant records and other documentation required for tablet coating, maintenance and cleaning of equipment in the work area.

• Perform all activities in accordance with cGMP.

• Maintain the cleanliness of work area to ensure cGMP compliance.

• Perform all other relevant duties required to meet the schedule.

• Check relevant material and product details against batch document

• Co-ordination with Engineering for break down rectification of coating and related solution mixing equipment.

• Involve in equipment / process qualification.

• Participate in investigation of process deviation, cGMP and all other compliance related matters, where applicable.

• Ensure compliance to GxP / Safety / Quality policies.

REQUIREMENT

• Good understanding of safe working practices and cGMP.

• Experience in tablet coating of oral solid dosage manufacturing is preferred.

• A good team player with positive learning attitude.

• Willing to work in Tuas area, in cleanroom environment with full gowning.

EDUCATION & EXPERIENCE

• Minimum GCE 'O' level or NITEC or Higher NITEC or Diploma in Biotechnology / Biomedical / Mechanical / Mechatronics Engineering or relevant disciplines

• With 2-5 years of manufacturing experience in Pharmaceutical or related industries.

• Entry level NITEC / Higher NITEC / Diploma candidates are welcome to apply.

• Aircraft Maintenance Engineering License with at least 5 years signing off in Singapore, CAAS licensed preferred and experience in performing aircraft heavy/line maintenance.
• Perform maintenance on customer aircraft in complying with Company
• Perform inspection, make adjustment and repair, replace components, and correct any malfunction or deficiency with and without power applied to the aircraft.
• Access and re-install aircraft components, which obstruct the performance of the assigned tasks.
• Perform basic mechanical and electrical removals and installation.
• Document work performed per quality procedure manual.
• Perform other tasks cleaning aircraft using approved materials, methods, and equipment, and loads and secures ballast and/or freight as required.
• Assist with fueling/ defueling aircraft as required.
• Assist Aircraft Technicians in troubleshooting and repairing of aircraft.
• Assist with repairs on components detached from the aircraft, for example, flaps, ailerons, elevators, rudders, doors, and leading edges.
• Work on aircraft as well as in component shops.
• Assist with complex repairs at on-site and off-site locations.

JOB RESPONSBILITY:

• Perform maintenance on customer aircraft in complying with Policies & Procedures and Aviation Authorities Rules and Regulations.
• Perform inspection, make adjustment and repair, replace components, and correct any malfunction or deficiency with and without power applied to the aircraft.
• Access and re-install aircraft components, which obstruct the performance of the assigned tasks.
• Perform basic mechanical and electrical removals and installation.
• Document work performed per quality procedure manual.
• Perform other tasks cleaning aircraft using approved materials, methods, and equipment, and loads and secures ballast and/or freight as required.
• Assist with fueling/ defueling aircraft as required.
• Assist Aircraft Technicians in troubleshooting and repairing of aircraft.
• Assist with repairs on components detached from the aircraft, for example, flaps, ailerons, elevators, rudders, doors, and leading edges.
• Work on aircraft as well as in component shops.
• Assist with complex repairs at on-site and off-site locations.
• Assist other employees in the performance of their duties within area(s) of qualification.
  
  WORK LOCATION: SINGAPORE
  
  PREFERED SKILL
• You have minimum Aircraft Maintenance Engineering License with at least 5 years signing off in Singapore, CAAS licensed preferred and experience in performing aircraft heavy/line maintenance.
• You have had experience working on aircrafts.
• You must Hold College/ Diploma and / or equivalent academic qualification.
• You have interpersonal skills necessary to establish and maintain effective working relationships with internal and external customers.
• You have planning and organizational skills necessary to coordinate workload around multiple assignments.

Responsibilities:

• Apply engineering principles and techniques to perform equipment engineering
• Carry-out mechanical maintenance and basic electrical troubleshooting and repair of workshop machinery
• Ensuring repairs, installations and preventive maintenance on equipment are completed on-time and safely
• Implement network solutions for equipment capability monitoring
• Able to interpret electrical, pneumatic and hydraulic diagrams for troubleshooting purposes
• Maintain proper safekeeping of maintenance tools and equipment
• Carry out safety inspection at workplace and follow safety procedures
• Perform any other duties as assigned by his Immediate Supervisors

Requirements:

· Minimum 5 years experience in equipment engineering and CNC maintenance works

· Experienced in dismantling and assembling of machines

We are looking for a Plant & Machinery (Mechanical / Electrical) Engineer for:

Metal shredder & non – ferrous separation / Vezanni Shear

Waste Wood To Energy Plant

Responsibilities:

• Responsible for ensuring highest possible uptime and availability for mechanical equipment in the scrap processing plant.
• Responsible for reliability is highest possible and where needed facilities / perform root cause investigations to increase reliability and general performance of equipment.
• Ensure incident free and reliable operation, including timely and proper maintenance of systems.
• Responsible for implementing Maintenance Excellence by aligning with International Best Practice on mechanical equipment.
• Ensure future maintenance activities are proactively planned, prepared and scheduled with the required level of equipment integrity and reliability.
• Ensure liaison with production team and other stakeholders to stay updated on the on-going maintenance activities.
• Ensure equipment documentation and Preventive Maintenance (PM) procedure are constantly updated.
• Ensure technical, environmental and safety aspects in all matters is assessed in compliance with Health and Safety regulations.

Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree, Master's Degree in Engineering (Electrical/Electronic), Engineering (Mechanical) or equivalent.
• Required language(s): Mandarin, English (in order to liaise with the Mandarin speaking associates)
• At least 5 Year(s) of working experience in the related field is required for this position.
• Required knowledge: hydraulic system, rotating parts, PLC system, Conveyor belts
• Preferably Senior Executive specialized in Engineering - Mechanical/Automotive or equivalent.

1. Install, service and repair vending machines.
2. Maintaining vending inventories
3. Ordering repair parts and keeping service records
4. Organizing the warehouse space and keeping the cleanliness of warehouse.
5. Always maintain professionalism, tact, diplomacy, and sensitivity to portray the company in a positive manner.

• Perform maintenance, repair or overhaul of Air compressor efficiently and complete them in a timely manner.
• Guide and lead the team of technicians who lack experience or knowledge in troubleshooting, diagnostics and best practices in the said operation.
• Write and submit Service Reports timely in clear and logical manner.
• Communicate with Service Manager, Sales Department and Customers on job related issues, recommendations, unforeseen problems and to identify potential risks to the team and/or the equipment or job.
• Ensure safety observances on site both for self and team and highlight safety risks to Manager.
• Accountable for the upkeep of equipment and tools used as well as proper housekeeping of your work surroundings.

Job Qualifications:

• High competency in the operations, maintenance and repair of major Air Compressor brands (Oil lubricated screw and Oil Free) such as Atlas Copco, Ingersoll Rand, Kobelco etc.
• Familiar with the operations, maintenance and repair of Air treatment equipment like Air Dryer and Filter.
• Knowledge of Vacuum pumps, blowers or other rotating equipment such as pumps is a plus.

Job Description:

• Ensure the machine is working correctly, and calibrating the machine to ensure proper measuring.
• Perform incoming, in-process and final inspection as per customer requirement.
• Maintain calibration record of measuring equipment.
• Document inspection results by completing reports and logs.
• Maintain safe and healthy working environment by following standards and procedures.
• Raise non-conformance report if necessary.

Job Requirements:

• NITEC/Higer NITEC in Precision Engineering.
• 2 -3 years of relevant QC experience in a manufacturing environment and knowledge.
• Able to interpret technical/mechanical drawings of geometrical dimensioning and tolerance.
• Able to perform CMM measurement; preferably with Wenzel or Zeiss.

Job Description:

To manage and supervise the mechanic in the performance of preventive and corrective maintenance works on equipment, so that the equipment can function properly and operate safely.

Requirements:

1. Prepare and schedule preventive maintenance work plan.

2. Control of preventive work plan, and assign overtime works where necessary.

3. Adjustment and plan for corrective maintenance works.

4. Assist to carry out preventive maintenance works where necessary.

5. Responsible for the behaviour and works of the mechanics under his control.

6. Control and collect informations from customer relating to works, mechanics, etc.

7. Teach and conduct on-the-job training for newly employed mechanics.

8. Teach and conduct safety procedures of works.

9. Teach and conduct operating principles of the equipment to the owner.

10. Assist in the attendance of building or equipment inspections are required by-law.

11. Follow-up on the breakdown report and assist the mechanic on the breakdown works.

12. Assist in the reduction of Breakdown ratio.

13. Ensure proper record of drawings, files, documents relating to the maintenance work of the equipment.

14. Ensure proper record of all tools issued.

15. Ensure proper record of mechanics Annual leave, Sick leave, etc.

16. Assist in conducting investigation of damages/accidents to equipment or personnel.

17. Preparation of necessary reports on relating maintenance works.

18. Report to the Maintenance Supervisor/ Asst Engineer/ Officer/ Asst Officer on matters relating to the section.

19. Carry out any other duties as assigned by superior.

20. Conduct patrol checks on maintenance works.

21. Follow-up on QC and QA defects.

22. Liaise with officers on maintenance works.

23. Ensure compliance to Environmental Policy, reduction of waste and prevention of pollution.

24. Ensure equipments under his care is properly maintain.

The Job

• Develop and implement maintenance plans and schedules based on equipment requirements and resource availability.
• Coordinate and communicate maintenance activities with co-workers and various departments to minimize disruption to day-to-day operations.
• Plan equipment inspection, servicing, and overhaul during scheduled downtime.
• Perform both short and long range planning and scheduling, respond to emergencies and schedule changes.
• Coordinate with procurement department to call quotation/tender for term contracts and external ad-hoc services required by maintenance team.
• Liaise with term contractors such as planning maintenance schedule, where applicable.
• Monitor validity of term contractors' insurance policies and security deposit during period of contract.
• Liaise with team leaders to create purchase requisition for utilization of term contract roles.
• Establish and maintain standardized maintenance planning process, procedures, and workflows.
• Review and improve maintenance processes and procedures including work order system to enhance overall effectiveness and efficiency.
• Make recommendations on best practices to be in line with industry standards.
• Maintain accurate records of maintenance activities, including work orders, maintenance procedures and schedule.
• Analyze breakdown report and liaise with team leaders to ensure breakdowns are categorized correctly.
• Provide reports on adherence to maintenance schedules.

The Requirements

• Minimum Diploma in technical field, preferably in Electrical or Mechanical Engineering.
• 5 years working experience in an engineering role, with minimum 3 years in scheduling position with demonstrated success of implementing and operationalizing master schedules.
• Proven experience in performing preventive maintenance and repair works.
• A team player.
• Good analytical and communication skills.
• Proficient in IT applications (Microsoft Word, Excel, and PowerPoint)

Requirements:

• To operate and maintain plant facilities and utilities.
• Responsible for continuously supplying purified water, chilled water, PUB water, steam, compressed air, etc.
• Responsible for continuous treatment of process wastewater and ensuring compliance with the discharge of treated water to the public sewage system.
• Responsible for continuously operating building services, including HVAC, ACMV, electricity, etc.
• Responsible for facilities & utilities equipment front-end troubleshooting.
• Responsible for carrying out or coordinating with vendors on asset repairs, maintenance, calibration, or project works.
• Execute assigned work activities on time.
• Responsible for safe operation and good housekeeping in facilities and utility areas.
• Manage external contractors/vendors in support of operation and maintenance activities.
• Assist supervisor in preparing equipment for maintenance, performing equipment isolation, LOTO, and supporting permit-to-work issuance.
• To provide input or be involved in drafting GMP documents eg. SOPs, forms, etc.
• Provide support to improvement projects, audits, EHS & Quality investigations, and CAPA.
• To be involved in internal and external inspections as required.
• Ensure compliance with GMP, regulatory requirements, ISO and EHS standards, and other relevant policies/standards, and support audit functions.
• Ensure workplace safety and be responsible for notifying management promptly of EHS/GMP deficiencies.
• Any other duties and responsibilities as assigned by the Supervisor.

Requirements:

• Possess a Minimum of NITEC in a technical field of study.
• Minimum 3 years of experience in the electronics, cosmetic, food, medical, or pharmaceutical industry handling facilities or utilities.
• Boiler Attendant Class 2 certification is a MUST.
• Competence in purified water, chilled water, steam, compressed air, wastewater treatment, cleanroom HVAC operations, and maintenance.
• Self-motivated, good teamwork, and interpersonal skills.
• Able to execute work as per work instructions or procedures.
• Experience working in an EHS environment and a permit-to-work system.

Job Requisition

• Diploma/Degree in any field

• Critical thinker and problem solver

• Good communication, negotiation, and presentation skills

• Computer Literate

• Good interpersonal skills

• Able to multi-task and meet tight deadlines

• Experience in the cleaning industry is an advantage

• No prior experience is welcomed

Responsibilities

• Nurturing and developing relationships with key customer accounts

• Seek and identify opportunities to grow the business with new or existing customers via client visits and cold calling

• Create and be accountable for all client proposals, quotation or any further documentation

• Assist with additional tasks/initiatives as assigned

Benefits

• Transport & Mobile allowances

• Basic + Incentives

• Professional development

Key roles and responsibilities

• Water sampling pertaining to environmental testing based on scheduled and ad-hoc tasks assigned, in accordance to in-house SOP and established sampling techniques.
• Ensure proper documentation and records updating at the end of each working day
• Ensure safety and adhere to all Safe Work Procedures
• Must be contactable at all times when placed on standby duty

Skills & Experience

• ITE / Diploma in any discipline from any field.
• Entry Level are welcome as training will be provided.
• Able to write & communicate in English
• Must be physically fit, self-driven, team player with initiative, willingness to learn and good communication skills
• Able to work on rest day depending on job requirement
• Having Class 3 Driving Licence is essential

Benefits

• 5 days' work week
• Transport provided
• Attractive salary package
• Medical benefit
• Career development plan through continuous and structured training program (employment bond is applicable for specialised training courses)
• Standby allowance for urgent work activation
• Handphone Reimbursement

Job Description

Report to Workshop Manager and Assistant Service Manager, responsible for performance of all automotive related repairs in achieving the Departmental sales turnover objectives with fast turnaround of customer vehicles and meet quality standard.

Job Scope

• Perform automotive service, repairs and OEM installation as per repair order instructions according to manufacturer's required procedures and quality standard.
• Diagnose and trouble fault on system components of the vehicle.
• Record all jobs done to the vehicle on repair done.
• Notify any addition fault or defect found in the repair process to Workshop Supervisor and obtain appropriate approval before proceeding with the repair .
• Ensure customer vehicles are cleaned after being repaired.
• Perform daily shop floor housekeeping.

Qualification Requirements

• Minimum qualification : N level / NITEC in Motor Vehicle mechanics.
• Minimum 1 year experience in Motor Vehicle Service and Repair for Diesel Engines.
• Valid Class 3 license added advantages.

Assist ROV team

- Hydraulic/Mechanical/Electrical support (Setting up, troubleshooting, repairs etc)

- Support R&D activities to develop, fabricate and build/upgrade new/existing ROVs

- Support data recording activities on jobs

- System launch and recovery

- Housekeeping

- Ability to work outdoor, on-board ships, possess a level of physical fitness appropriate to the job requirements, and able to work based on operations schedules.

- To assist with ROV operations as instructed and in accordance with approved procedures and QHSE policies.

- Possess Class 3 driving license will be an advantage

Our client, a well established medical device company is currently looking for a Production Technician to join their team.

Salary: up to $2,500 + Overtime Pay + Transport Allowances $150
Work Days: 5 Days (8am to 4:45pm from Mon to Fri)
Work Location: Boon Lay

Job Duties:
• Perform all production activities at various stages and to work as a team to achieve production targets in accordance with ISO Quality Management System and applicable safety standards.
• Weighing, mixing, filter preparation, filling and packaging.
• Completion of all associated production records in accordance with good documentation practices.
• Transfer of raw and packaging materials as well as finished products.
• Perform house-keeping and first-level trouble-shooting of equipment as needed.
• Equipment and area cleaning on regular intervals.
• Comply with all safety and environmental regulations.
• Work on continuous improvement initiatives within Production.
• Handle non-routine duties as assigned by senior technicians or Production supervisor.

Requirements:
• Min GCE O Level / Nitec in production, preferably in Industrial Engineering
• Min 3 years of related working experience, preferably in chemical process related industry / production factory
• Computer literate (MS Office) and knowledge of Chemistry preferred
• Responsible, reliable and able to work independently as well as a team player

Please submit your resume in MS Word format to [email protected]

Please remember to include your
1) Recent photo
2) Salary information
3) Notice period

UNITED PERSONNEL SERVICES
21 Bukit Batok Crescent
#11-74 WCEGA Tower
Singapore 658065
Tel: +65 6565 1939
www.united-personnel.com

EA Licence Number: 05C5278
Registration No.: R1103477

(All applications will be treated in strictest confidence. We regret that only shortlisted candidates would be notified)

ALATAS Crane Services Worldwide is a worldwide operating crane service specialist and offers crane related services and parts supply in the Ship-, Offshore-, and Construction industry.

With our global set-up of 14 offices worldwide, we offer field service, provide technical solutions for emergency repairs, large scale overhauls, load testing, inspections, component repairs, spare parts supply as well as supply of new cranes and upgrades to existing ones.

Our specialized Crane Service Engineers are professionals in their field and are available attend to crane problems throughout the world.

We also operate a repair workshop for hydraulic- & mechanical components, such as hydraulic pumps, motors, cylinders, gearboxes and other crane components.

To support our crane servicing department, we are employing experienced Workshop Technician as follows:

JOB DESCRIPTION:

• Assemble, dismantle, service & repair of Marine pumps and machinery parts
• Steel repairs on Grabs, Windlasses & other Deck Machinery Parts
• Afloat repairs on Deck Machinery & Cranes

REQUIREMENTS:

• NTC 3 (or higher) in Mechanical Engineering or equivalent
• Strong technical knowledge of at least 3 years of experience in the assemble, dismantle, service & repair of Marine pumps and machinery parts (is a must)
• Welding qualifications will be an added advantage
• Pro-active team player, with the right working attitude and willing to work overtime

ALATAS Crane Services Worldwide is a worldwide operating crane service specialist and offers crane related services and parts supply in the Ship-, Offshore-, and Construction industry.

With our global set-up of 14 offices worldwide, we offer field service, provide technical solutions for emergency repairs, large scale overhauls, load testing, inspections, component repairs, spare parts supply as well as supply of new cranes and upgrades to existing ones.

Our specialized Crane Service Engineers are professionals in their field and are available attend to crane problems throughout the world.

We also operate a repair workshop for hydraulic- & mechanical components, such as hydraulic pumps, motors, cylinders, gearboxes and other crane components.

To support our crane servicing department, we are employing experienced Workshop Technician as follows:

JOB DESCRIPTION:

• Assemble, dismantle, service & repair of Marine pumps and machinery parts
• Steel repairs on Grabs, Windlasses & other Deck Machinery Parts
• Afloat repairs on Deck Machinery & Cranes

REQUIREMENTS:

• NTC 3 (or higher) in Mechanical Engineering or equivalent
• Strong technical knowledge of at least 3 years of experience in the assemble, dismantle, service & repair of Marine pumps and machinery parts (is a must)
• Welding qualifications will be an added advantage
• Pro-active team player, with the right working attitude and willing to work overtime

Job Highlights

• Immediate Hiring
• Lunch provided
• Short walking distance from Tuas Link MRT Station

Job Description

• Maintenance of all new and existing equipment within Company and manufacturing area.
• Schedule and perform planned and unplanned maintenance activities through Total Preventative Maintenance (TPM) systems.
• Documentation of all maintenance activities ensuring traceability in accordance with Good Manufacturing Practice (GMP) and Company requirements.
• Observe and comply with company sequence of operations (SOO’s), standard operating procedures (SOP’s), and emergency operating procedures (EOP’s).
• Procurement of third-party services, e.g., specialist contractors, production equipment vendor, electrical and refrigeration engineers and parts.
• Supervise suppliers / contractors who are on site to ensure that all maintenance work is carried out in accordance with the contract, regulatory requirements and company Standard Operating Procedures (SOP’s).
• Maintenance of utilities equipment’s such as AHU chiller, ACMV, air-compressor, water heater, electrical and electronic system.
• Perform risk assessments for all facilities activities annually.
• Maintain of records, prepare reports and compose correspondence relative to the work.
• Any ad-hoc duties as assigned by the management.

Job Requirements

• Minimum NITEC in Facility Management, Electrical or Mechanical.
• At least two years of relevant experience.
• Proficient in Microsoft (MS) Excel and Word.
• Knowledge of PLC understanding and diagnostic.
• Ability to multi-task and prioritise jobs to meet tight deadlines and required targets.
• Self-motivated, meticulous, organized and a good team player.