Senior Principal Engineer

Job Responsibilities:

• Independently carry out Design Safety Philosophy, HSE Plan and specifications for fire protection systems (active and passive), HFE, etc.
• Participate in Process Hazard reviews and analysis including HAZOP/HAZID/SIL studies and responsible for actions close-out
• Lead/Chair the HAZOP/HAZID/SIL workshops, if required
• Responsible for review Third Party safety studies including FERA, Dispersion analysis, EERA, ESSA, Dropped objects study, QRA studies, etc. (not limited too)
• Carry out independently similar safety studies, as required
• Carry out independent design of Active and Passive Fire Protection systems and prepare Hazardous/H2S Area Classification documentation, Safety and Fire Fighting layouts, escape route and life saving equipment layout and other safety drawings
• Carry out safety critical elements performance standards, RAM, fire and gas detection mapping, etc. based on project requirements
• Act as Package Engineer for Safety and Fire Fighting Equipment
• Manage and guide Junior/ Senior Engineers and designers on Concept / FEED / Detailed Engineering projects
• Provide health and environmental inputs (inputs include health risk assessments such as chemical exposure, noise and lighting, ergonomics/Human factors engineering, environmental impact assessments, etc.) to projects
• Interface/coordinate with other engineering disciplines, client and take lead in resolving technical matters related to safety aspects
• Able to deliver project safety deliverables as per project schedule
• Provide inputs and support to projects in all safety aspects including progress reports

Job Requirements:

• Bachelor Degree in Chemical Engineering or equivalent from an accredited university
• Have 15 to 30 years of HSE engineering experience in the Oil and Gas industry, in Process safety/technical safety and worked minimum 4 to 5 years as a Lead position in similar projects
• Has involved in design projects for Offshore (FPSO/Platforms) and Onshore (Refineries, LNG facilities, Storage terminal, etc)
• Should have worked in mininum number of Offshore projects (FPSO/Platforms)
• Possess good knowledge of Oil and Gas process facilities, local and international Process safety codes and standards and regulatory/marine codes and standards (MODU, SOLAS, DNV/Lloyds Register)
• Should have hand on experience in plot plan review, HAZID, HAZOP, SIL classification/verification and other safety reviews (e.g.SIMOPS, ALARP)
• Good working knowledge in PIPENET Vision, Flaresim and other consequence modelling software such as DNV PHAST. etc. is needed
• Ability to influence designs to achieve optimal HSE outcomes
• A team player with leadership potential and shall have pro-active inter-discipline communication

Principal Engineer

Job Responsibilities:

• Independently carry out Design Safety Philosophy, HSE Plan and specifications for fire protection systems (active and passive), HFE, etc.
• Participate in Process Hazard reviews and analysis including HAZOP/HAZID/SIL studies and responsible for actions close-out
• Responsible for review Third Party safety studies including FERA, Dispersion analysis, EERA, ESSA, Dropped objects study, QRA studies, etc. (not limited too)
• Carry out independently similar safety studies, if required
• Carry out independent design of Active and Passive Fire Protection systems and prepare Hazardous/H2S Area Classification documentation, Safety and Fire Fighting layouts, escape route and life saving equipment layout and other safety drawings
• Carry out safety critical elements performance standards, RAM, fire and gas detection mapping, etc. based on project requirements
• Act as Package Engineer for Safety and Fire Fighting, Life Saving Equipment
• Manage and guide team Engineers and Designers
• Provide health and environmental inputs (inputs include health risk assessments such as chemical exposure, noise and lighting, ergonomics/Human factors engineering, environmental impact assessments, etc.) to projects
• Interface/co-ordinate with other engineering disciplines, client and take lead in resolving technical matters related to safety aspects
• Able to deliver project safety deliverables as per project schedule
• Provide inputs and support to projects in all safety aspects including progress reports

Job Requirements:

• Bachelor Degree in Chemical Engineering or equivalent from an accredited university
• Minimum 14 to 18 years of HSE engineering experience in the Oil and Gas industry, in Process safety/technical safety and preferably worked 1 to 3 years as a Lead position in similar projects
• Has involved in design projects for Offshore (FPSO/Platforms) and Onshore (Refineries, LNG facilities, Storage terminal, etc)
• Should have worked in mininum number of Offshore projects (FPSO/Platforms)
• Possess good knowledge of Oil and Gas process facilities, local and international Process safety codes and standards (e.g. NFPA, EI15.etc) and regulatory/marine codes and standards (MODU, SOLAS, DNV/ABS/Lloyds Register)
• Should have hand on experience in plot plan review, HAZID, HAZOP, SIL classification/verification and other safety reviews (e.g.SIMOPS, ALARP)
• Good working knowledge in PIPENET Vision, Flaresim and other consequence modelling software such as DNV PHAST. etc. is needed
• Ability to influence designs to achieve optimal HSE outcomes
• A team player with leadership potential and shall have pro-active inter-discipline communication

My client, an Asian bank is looking to hire an AVP , Technology Governance & Control to be part of their key IT Team provioding IT Technology Governance and Control oversight on the IT System Development and Service Management, IT Operations, and IT Support and Control function team.

It's a full time position, office is located at Changi Business Park (East)

• Design, develop, implement, and maintain the IT Technology Governance and Control framework, Policies and Processes (inclusive of process implementation and tools development). This covers areas in IT System Development and Maintenance, IT Service Management (ITSM), IT Assets Management (ITAM), IT Security and Operations, with a strong focus on Identity Access Management (IAM).
• Establish IT Control objectives that are in line with regulatory requirements (e.g., MAS TRMG, BNM RMIT) and the bank's internal IT procedure manuals.
• Ensure compliance with the bank's IT Governance policies and procedures and implement support initiatives to strengthen the overall governance framework. This includes liaising with IT system owners to perform system risk assessment whenever there are system enhancement or new onboarding of systems.
• Liaise and work with APAC branches on the standardization of processes and procedure and perform review of APAC Branches’ IT related documents such as Procedure Manuals and Guidelines.
• Carry out regular compliance check on IT controls on Project Management, IT Security and Operation, and identify non-compliance and work with stakeholders to remediate the non-compliance areas.
• Identify and implement areas of improvements within IT for better productivity, better controls and higher efficiency on overall IT Operation.
• Be a Subject Matter Expert on topic related to Identity Access Management (IAM). This includes designing and implementing a comprehensive IAM framework that covers all aspects of identity management, access control, and privileged access management.
• Provide leadership and guidance to the technology teams to ensure that they adhere to the IAM policies and procedures, including user access management, identity verification, and security controls.
• Manage the implementation of an effective IAM toolset (e.g., SailPoint).
• Ensure that relevant controls are applied, e.g., review of end users' system access requests and ensure appropriate provisioning are granted with timely de-provisioning achieved and perform periodic review of users' access into IT system to ensure there are no unauthorized access.
• Provide review and assessment on user access matrix (UAM) for respective system and work with IT system owners to ensure proper segregation of duties are implemented within the system.

Qualifications:

• Bachelor's degree in IT or equivalent with min. 10 years of working experience with good knowledge and experience in IT Governance and Control function, preferably within the Financial Services sector.
• Strong leadership and people management skills, with experience in managing teams responsible for IAM and IT Auditing is an added advantage.
• Subject Matter Expert on Identity Access Management especially system and users' access control management in the technical aspect can be considered.
• Ability to identify the risk within process and develop control checks to ascertain the controls implemented are effective.
• Solid technical and functional knowledge of relevant regulatory and compliance requirements, with proven experience in applying legal/regulatory guidance into solving practical problems.
• Ability to work collaboratively with stakeholders at all levels of the organization (e.g. between HQ, APAC branches and Singapore teams).
• Good working knowledge of relevant industry standards and understanding of industry trends and products.
• Proven ability to understand, identify, analyse and communicate clearly the operational risks within processes.
• Good understanding of the overall System Development and Operational processes within the financial services industry.
• Ability to manage large workloads and tight deadlines and prioritize accordingly.
• Experience in IT Governance Reviews, Controls Testing and Assurance, and delivery of training.
• Excellent communication, presentation and interpersonal skills.
• Working experience on JIRA (workflow management system) and ServiceNow (ITSM/ITAM) is preferred.

APPLY NOW! Interviews are ongoing! email to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Chiam Lee Ping Dayna

Consultant

Reg. No: R1764404

Stellar- Link Partners Pte Ltd (EA License: 21S0698)

• Managing the design of utilities diversion route, supporting structure and other required structure.
• Coordinate with authorities to facilitate the work progress such as PUB, SPPG, LTA etc.
• Engage and liaise with approved subcontractor for any services diversion works.
• Approval request submission to relevant authorities for services diversion and traffic diversion at site
• Incorporate utilities diversion plan to construction schedule.
• Planning for reinstatement
• Preparation of tender for subcontractor of utility
• Preparation of CIAR(construction impact assessment report) for PUB/LTA with subcontractor
• Establishment of overall utility plan including short & long term
• Management of each activity for utility work on site
• Preparation & coordination with subcontractor for NCE(notification for commencement of earthworks)
• Approval for PTD(permit to dig) related utilities
• Pegging and demarcation for utilities on site
• Regular inspection / petrol / visual check for existing utility
• Establishment of emergency plan for utility
• To check daily, weekly and monthly progress report before submission
• Must be able to work 5.5 days per week
• Bachelor Degree in Civil Engineering or equivalent
• Minimum 2 years engineering experience in large scale and complex project

Our client is an International multi-disciplinary consultancy with offices across APAC. They have a strong presence in SG across M&E design and have successfully expanded into C/S in the last few years. They are now seeking an Associate to lead its C/S division, including winning new business.

Job Description:

• Managing projects or project components, budgets, schedules, quality assurance and client feedback and ensuring effective communication of any changes/modifications.
• Assisting in workload management and resource forecasting and involved in preparation of proposal documentation.
• Reviewing and ensuring compliance, including drawings, reports, specifications, survey, access, and preparation of appraisals.
• Building and maintaining effective relationships with clients, recognizing, and developing potential business opportunities

Requirements:

• Min Bachelor’s Degree in Civil & Structural, recognised by PEB (Singapore)
• Registered Professional Engineer in Singapore
• Min 8+ years within a consultancy environment
• Strong project management skills with ability to lead project team members on technical delivery. Excellent presentation, verbal, and written communication skills.
• Sufficient experience to demonstrate intermediate to advanced knowledge of relevant engineering codes, standards, and practices. – Euro Design Codes, Singapore Standards and Codes of Practice, and authority prerequisite
• Experience in software tools (not limited to)– SAP200, Tekla Tedds, Prokon
• Organised approach and ability to accept increased responsibility and produce accurate and detailed work.

To view more roles within; construction, real estate, engineering, architecture, or renewables, please visit our website: www.archerrecruitment.com, contact one of our specialist consultants http://archerrecruitment.com/about/our-people/ and/or 'follow' our LinkedIn page for regular industry updates.

We appreciate every application, however, due to a high volume of applicants, only shortlisted candidates will be contacted.

Responsibility:

* Design, analysis and plan for Civil & Structural engineering works
* Liaise with consultants, contractors & authorities from inception to completion of projects on C&S matters
* Responsible for timely submission of plans and reports to authorities and clients
* Manage projects to meet the time, cost and quality objectivies
* Coordinate and monitor work progress at site including periodical site inspection and attending meeting
* Assists in other ad hoc duties as assigned

Requirements:

• Able to work independently with minimal guidance.
• Proficient in MS Office/Excel
• At least 3 years of local construction experience
• Knowledge in BIM / Revit software is added advantage.
• At least Diploma/ Degree in Civil & Structural engineering or equivalent recognized by the Professional Engineers Board
• Fluent in English , Good project management and communication skills

Job Responsibilities

1. More than 5 years of experience in curtain wall door and window design, such as united curtain wall design and structural calculation;

2. Able to independently complete the secondary in-depth design of the scheme drawings, and be able to independently and lead the team to complete the design work during the project implementation phase (calculating materials, refining processing drawings, and solving technical problems in factory processing/on-site installation);

3. Design the door and window project plan according to the requirements of the customer's bidding document.

4. Pick materials, place process orders according to construction drawings, and connect with factory production.

5. Standardize the process of making doors and windows.

6. Cooperate with business and customer docking technical issues.

7. Priority will be given to those with experience in system door and window research and development.

Chief Engineer

Job Responsibilities:

• Independently carry out Design Safety Philosophy, HSE Plan and specifications for fire protection systems (active and passive), HFE, etc.
• Participate in Process Hazard reviews and analysis including HAZOP/HAZID/SIL studies and responsible for actions close-out
• Lead/Chair the HAZOP/HAZID/SIL workshops, if required
• Responsible for review Third Party safety studies including FERA, Dispersion analysis, EERA, ESSA, Dropped objects study, QRA studies, etc. (not limited too)
• Carry out independently similar safety studies, as required
• Carry out independent design of Active and Passive Fire Protection systems and prepare Hazardous/H2S Area Classification documentation, Safety and Fire Fighting layouts, escape route and life saving equipment layout and other safety drawings
• Carry out safety critical elements performance standards, RAM, fire and gas detection mapping, etc. based on project requirements
• Act as Package Engineer for Safety and Fire Fighting Equipment
• Manage and guide Junior/ Senior Engineers and designers on Concept / FEED / Detailed Engineering projects
• Provide health and environmental inputs (inputs include health risk assessments such as chemical exposure, noise and lighting, ergonomics/Human factors engineering, environmental impact assessments, etc.) to projects
• Interface/coordinate with other engineering disciplines, client and take lead in resolving technical matters related to safety aspects
• Able to deliver project safety deliverables as per project schedule
• Provide inputs and support to projects in all safety aspects including progress reports

Job Requirements:

• Bachelor Degree in Chemical Engineering or equivalent from an accredited university with minimum 22 years of relevant design engineering experience
• Have good HSE Engineering experience in the Oil and Gas industry, in Process safety/technical safety and worked minimum 3 to 5 years as a Lead position in similar projects
• Experience with Oil & Gas engineering company doing Onshore and Offshore Projects
• Has involved in design projects for Offshore (FPSO/Platforms) and Onshore (Refineries, LNG facilities, Storage terminal, etc)
• Should have worked in mininum number of Offshore projects (FPSO/Platforms)
• Possess good knowledge of Oil and Gas process facilities, local and international Process safety codes and standards and regulatory/marine codes and standards (MODU, SOLAS, DNV/Lloyds Register)
• Should have hand on experience in plot plan review, HAZID, HAZOP, SIL classification/verification and other safety reviews (e.g.SIMOPS, ALARP)
• Good working knowledge in PIPENET Vision, Flaresim and other consequence modelling software such as DNV PHAST. etc. is needed
• Ability to influence designs to achieve optimal HSE outcomes
• A team player with leadership potential and shall have pro-active inter-discipline communication

• Managing the design of utilities diversion route, supporting structure and other required structure.
• Coordinate with authorities to facilitate the work progress such as PUB, SPPG, LTA etc.
• Engage and liaise with approved subcontractor for any services diversion works.
• Approval request submission to relevant authorities for services diversion and traffic diversion at site
• Incorporate utilities diversion plan to construction schedule.
• Planning for reinstatement
• Preparation of tender for subcontractor of utility
• Preparation of CIAR(construction impact assessment report) for PUB/LTA with subcontractor
• Establishment of overall utility plan including short & long term
• Management of each activity for utility work on site
• Preparation & coordination with subcontractor for NCE(notification for commencement of earthworks)
• Approval for PTD(permit to dig) related utilities
• Pegging and demarcation for utilities on site
• Regular inspection / petrol / visual check for existing utility
• Establishment of emergency plan for utility
• To check daily, weekly and monthly progress report before submission
• Must be able to work 5.5 days per week
• Bachelor Degree in Civil Engineering or equivalent
• Minimum 2 years engineering experience in large scale and complex project

Responsibilities

• Proven experience with enterprise data integration technologies across all aspects of solutioning including IT roadmap / conceptual architecture, technical due diligence / planning, design and solution delivery.
• Gathers and understanding requirements from business analysts, I.T. department and identifies the platform and architecture of the system Familiarity with architectural modelling technique (e.g. UML, ERD, etc.)
• Responsibilities include support & maintenance of the existing systems, performance tuning, automation, governance of the projects, solution reviews.
• Deep understanding of Application, Infrastructure and security architecture and non-functional aspects like Performance, Scalability, Reliability, Availability etc.
• Translate functional requirements to design.
• Work with technical SMEs to understand their requirements and ensure these are met.
• Lead activities to build accelerators and tools to increase the quality of deliverables.
• Evaluates industry technologies to shape design of services in consideration of cost, portability, compatibility, or usability factors.
• Identifies and makes appropriate changes to technologies, and systems to meet customer and operational requirements.
• Any other ad-hoc duties assigned by supervisor

Requirements

• Hands-on IT professional with minimum 8 years of Software Development experience
• Experienced in architecting Digital solutions involving Omni Channels.
• Solid exposure on Content Management Systems preferably Adobe Experience Manager.
• Experience in implementing Mobile applications and platforms.
• Experience in enterprise application integration using middleware tools.
• Experience in designing secure web and mobile solutions.
• Should have 8+ years of hands-on experience in web application development using .NET Core, ASP.NET MVC, Entity Framework, SQL Server with Front End Technologies using Angular, React, Bootstrap, HTML 5, jQuery, CSS 3, AJAX, JSON.
• Minimum 2+ years of working experience in Rule Engine Decision platform development using Inrule
• Minimum 4+ years of working experience in cloud native application design and development.
• Experienced in Architecture and Design using UML.
• Exposure on Infrastructure Sizing for applications and Web application security.
• Proven track record of successfully delivering API/SOA/Middleware integration projects
• Experience with middleware/messaging technologies such as MQ, JMS, Kafka and exposure to event-driven design patterns
• Demonstrated knowledge of OAuth token-based authentication protocol.
• Demonstrated knowledge of PCI and Security Coding Standards.
• Experienced in Azure Kubernetes Service (AKS) and API Management using Azure API Gateway (APIM).
• Experienced in DevOps automation, containerization, and orchestration.
• Defining CI/CD pipelines to automate test and release across different application environments using concepts such as Blue/Green and Canary deployments and related technologies. (Azure Devops, Jenkins)
• Experienced in designing & developing solutions using PowerApps and Power Automate
• Experience in gaming and Hospitality industry would be an advantage
• Problem solving skills and ability to work under pressure.
• Good command of English, both written and spoken.

Interested applicants, please email your resume to Karin Chan Wei Kien

Email: [email protected]

CEI Reg No: R1104584

EA Licence No: 99C4599

Recruit Express Pte Ltd

Senior Principal Engineer

Job Responsibilities:

• Lead Process Engineering and design, process configuration and optimization studies
• Perform Process simulations, prepare Process/Utility Flow Diagrams, Heat and Material Balance, Utility Balance
• Prepare Piping and Instrumentation diagrams
• Prepare Process equipment datasheets, instrument datasheets
• Perform relief and blowdown studies, relief load scenario analysis and flare network calculations
• Perform process calculations for equipment sizing and line hydraulics
• Prepare Process design philosophies and operating guides

Job Requirements:

• Bachelor Degree in Chemical Engineering with minimum 15 years of experience
• Have worked on Concept studies, FEED and detailed design projects
• Should have good experience on Offshore Oil and Gas projects
• Have led process teams on Hydrocarbon projects
• Has in-depth understanding of process design, heat and material balance and P&IDs
• Knowledge of international codes and standards, software and tools
• Candidates with Lead Engineer experience will be given preference

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a E&I Engineer to assist their E&I team for the next phrase of their business. They are located in South – easily accessible.

Duties of E&I Engineer:

• Responsible in designing and developing new control systems, which can be complex in nature necessitating the expert application of engineering knowledge and control disciplines such as process control, programmable logic controllers (PLC), and supervisory control and data acquisition (SCADA).
• Responsible to prepare, review and approval of drawings, instrument lists, data sheets, elect diagrams, control architecture, logic diagrams, operating procedures
• Responsible to plan and self-monitor daily engineering and design work assignments
• Responsible in controling and monitoring job costs and schedules to meet completion dates, customer technical specifications and internal technical specifications
• Responsible in developing and using engineering standards (electrical, instrument, etc.), procedures and forms for engineering design and production fabrications.
• Responsible in providing engineering advice and support to engineers and Project Managers.
• Responsible in preparing FAT procedure and test Control system
• Responsible in conducting training on plant operation & maintenance.
• Responsible in performing plant start-up & commissioning/ troubleshooting.
• Responsible in representing the company for customer discussions and technical reviews

Requirements

• Minimum Degree in Engineering/ Electrical or equivalent
• Minimum 5-8 years of relevant experience
• Knowledge of Microsoft Office and AutoCad
• Knowledge of PLC programming experience is a bonus
• Prior experience with SCADA system is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

EA License No: 19C9682

EA Personnel No: R21101676

EA Personnel Name: Ng Zhi Qing Alethea

Key Responsibilities:

Compliance with SFA Regulations:

• Stay updated on all relevant SFA regulations pertaining to meat production.
• Ensure that all production activities adhere to SFA guidelines and requirements.
• Collaborate with regulatory agencies for inspections, audits, and certifications.

Quality Assurance:

• Develop and implement quality assurance and control procedures for meat production.
• Monitor and evaluate the quality of raw materials, production processes, and finished products.
• Investigate and resolve quality issues promptly to maintain product integrity.

HACCP Implementation:

• Oversee the Hazard Analysis and Critical Control Points (HACCP) program.
• Establish and maintain HACCP plans, conduct hazard assessments, and update as necessary.
• Train and educate staff on HACCP principles and procedures.

Supplier Management:

• Evaluate and manage relationships with meat suppliers to ensure the quality and safety of incoming raw materials.
• Implement supplier audit programs and maintain supplier quality standards.

Team Leadership:

• Build and lead a dedicated QA team, providing guidance, training, and mentoring.
• Ensure team members understand their roles and responsibilities in maintaining quality and safety standards.

Continuous Improvement:

• Identify areas for process improvement and cost reduction while maintaining or improving product quality.
• Implement corrective and preventive actions to address non-conformities and prevent reoccurrence.

Documentation and Reporting:

• Maintain accurate and comprehensive records of quality control activities.
• Generate reports for senior management, regulatory agencies, and internal audits.

Emergency Response and Crisis Management:

• Develop and execute crisis management plans for food safety emergencies.
• Coordinate with relevant authorities and stakeholders during crisis situations.

Requirements

• Bachelor’s degree in food science, Food Technology, or a related field. A Master's degree is a plus.
• Minimum of 5 years of experience in meat production, with at least 2 years in a managerial or supervisory role.
• In-depth knowledge of SFA regulations and guidelines related to meat processing and production.
• Certified in HACCP and food safety management systems.
• Strong leadership and team management skills.
• Excellent communication and interpersonal skills.
• Problem-solving and decision-making abilities.
• Attention to detail and a commitment to quality.
• Ability to work under pressure and handle food safety emergencies effectively

Responsibilities:

• Maintaining and administering computer networks and related computing environments including systems software, applications software, hardware, and configurations.
• Performing disaster recovery operations and data backups when required.
• Protecting data, software, and hardware by coordinating, planning, and implementing network security measures.
• Troubleshooting, diagnosing, and resolving hardware, software, and other network and system problems.
• Replacing faulty network hardware components when required.
• Maintaining, configuring, and monitoring virus protection software and email applications.
• Monitoring network performance to determine if adjustments need to be made.
• Conferring with network users about solving existing system problems.
• Operating master consoles to monitor the performance of networks and computer systems.
• Coordinating computer network access and use.
• Designing, configuring, and testing networking software, computer hardware, and operating system software.

Requirements:

• Strong understanding of network infrastructure and network hardware.
• Ability to think through problems and visualize solutions.
• Ability to implement, administer, and troubleshoot network infrastructure devices, including wireless access points, firewall, routers, switches, controllers.
• Knowledge of application transport and network infrastructure protocols.
• Ability to create accurate network diagrams and documentation for design and planning network communication systems.
• Provides specific detailed information for hardware and software selection.
• Ability to quickly learn new or unfamiliar technology and products using documentation and internet resources.
• Ability to work with all levels of staff within and outside of IT and outside the organisation.
• A self-starter able to work independently but comfortable working in a team environment.
• Good analytical and problem-solving skills.
• Dependable and flexible when necessary.
• Network security experience.
• LAN and WAN experience.

Responsibilities:

• Develop or prepare planning for assigned projects.
• Liaise and coordinate with client, consultants, authorities, sub-contractors and etc.
• Preparation of daily jacking record and progress report.
• Provide engineering support in tendering of new project.
• Performs design calculations, assist with budget review.

Requirements:

• Minimum Diploma
• Minimum of 2 years of experience
• Experience with AutoCad
• Possess Class 3 driving licence
• Able to work independently

• Responsible to perform Surveillance Inspection to ensure that the piping work is performed and duly meeting the project specific Quality Requirements.
• Responsible for verification of in process inspection, final inspection and welding.
• Arrange for proper NDT requirements as per specifications and to establish and maintain inspection and NDT progress status on weekly basis.
• Well versed with all the techniques involving NDT methods UT, MT,PT,PMI & VI
• Responsible to raise Non-conformance reports as seen during inspection and follow-up on status of rework and close-out.
• Prepare and maintain Welding Audit Report during construction and to record result of inspections and maintain records of specific items as per contract/specifications
• Read Structural and Piping Isometric Drawing
• Welding Inspections of Structural of and piping fabrication
• Responsible to establish the inspection and Test Plan and all other quality related documents
• Responsible to establish project method statements for various activities required for the project
• Attend weekly quality meeting with client and in-house meetings
• Conduct site surveillance and maintain a log and advise construction to close accordingly
• Monitor and inspect all the installation for correctness and as compliance according to project requirements
• Coordinate with client and 3rd party for inspection
• Other ad-hoc duties as assigned

• Managing the design of utilities diversion route, supporting structure and other required structure.
• Coordinate with authorities to facilitate the work progress such as PUB, SPPG, LTA etc.
• Engage and liaise with approved subcontractor for any services diversion works.
• Approval request submission to relevant authorities for services diversion and traffic diversion at site
• Incorporate utilities diversion plan to construction schedule.
• Planning for reinstatement
• Preparation of tender for subcontractor of utility
• Preparation of CIAR(construction impact assessment report) for PUB/LTA with subcontractor
• Establishment of overall utility plan including short & long term
• Management of each activity for utility work on site
• Preparation & coordination with subcontractor for NCE(notification for commencement of earthworks)
• Approval for PTD(permit to dig) related utilities
• Pegging and demarcation for utilities on site
• Regular inspection / petrol / visual check for existing utility
• Establishment of emergency plan for utility
• To check daily, weekly and monthly progress report before submission
• Must be able to work 5.5 days per week
• Bachelor Degree in Civil Engineering or equivalent
• Minimum 2 years engineering experience in large scale and complex project

• Developing detailed designs.
• Doing feasibility assessments and site inspections.
• Preparing and implementing project plans.
• Researching and providing estimates for projects.
• Reviewing government regulations and ordinances.
• Monitoring and optimizing safety procedures, production processes, and regulatory compliance.
• Making recommendations or presenting alternative solutions to problems.
• Confidently liaising with clients and other professional subcontractors.
• Project management duties (e.g. managing budgets, resources, and deadlines; acquiring and compiling quotes, etc.).

We are looking for driven and dynamic sales executives to drive revenue for our company in Singapore. The objective is to achieve business growth by expanding the current customer base.

To be successful in this role, you will need to have

1. Degree or Diploma in Engineering
2. 1-2 years relevant working experience, entry-level candidates are also welcomed to apply
3. Singaporeans preferred
4. Able to travel for extended period
5. Self-motivated and Team Player
6. Good interpersonal and communication skills
7. Good command of English and Mandarin in order to speak with clients and counterparts from Chinese speaking countries
8. PC Literate and able to work independently

JOB RESPONSIBILITIES

1. Identify and keep up with changing demand of existing customers and markets for automotive air-conditioning system and compressors for local and overseas market
2. Identifying and opening new emerging markets in the territory assigned
3. Coordinate with all departments involved in compressors and AC development system, localization of parts, purchasing, production and shipping schedule
4. Prepare Execution Plan, Mikomi and Mid-Term Plan for territory assigned
5. Manage monthly sales and shipment forecast to meet customers’ needs
6. Meet yearly sales and shipment forecast to meet customers’ needs
7. Meet yearly sales and gross profit objective of market assigned
8. Communicate with Sanden subsidiaries when necessary
9. Maintain good relationship with customers and ensure excellent customer service
10. Provide basic technical support to customers where required
11. Perform any other duties as assigned by the superior

· Prepare Standard Operating Processes (SOP) for assembly production process

· Provide preventive maintenance for machines, tools and jigs for production and engineering

· Ensure tooling and machinery are working and updated accordingly

· Perform monthly maintenance for tooling, machinery and set up

· In charge of engineering projects

· Improve existing work processes and prepare new ones whenever necessary

· Enhance productivity by improving the production process and boosting innovative measures

· Solve in-process assembly lines issues

· Source for new tooling suppliers and liaise with them

· Work with drafter wherever there is engineering concern with the drawings

· Work with sales team for new products/RFQ requested

· Work with QA team for first article and new products qualification

· Monitor the status of trials of new products regularly

· Monitor and improve the drawings and technical requirements for all CSS products

· Generate process drawing flow for production reference

Requirements:

· Diploma/Degree in Electrical/Mechanical Engineering or equivalent

· 2 years relevant working experience

· Able to work independently and in a team

· Strong problem solving and root-cause analysis skills

Location: Woodlands

Basic $3000-$3500

Have AWS & Bonus

General Purpose/Scope

• Support in process improvements, customer returns, cycle time reduction and scrap reduction initiatives.

Essential Job Duties

• Work closely with Process/Manufacturing Engineer to monitor and improve the process capability.
• Ensure the scrap, production yield and cycle time reduction targets are met.
• Review process issues, NCR and conduct failure analysis.
• Updating of Manufacturing work instructions/routers.
• Participate in cross-functional teams on various improvement projects.
• Conduct Evaluations/Special Build Request.
• Support QA for failure analysis and identification of corrective action for customer returns and internal CAR’s.
• Preparation of the failure analysis report on customer return parts.
• Co-ordinate and expedite First article build with Production.
• Participate as a team player in maintaining a conducive, healthy & safe work environment.
• Maintains good housekeeping, safety and discipline in work area.
• Hands-on experience in assembly of prototype module.
• Perform other duties as requested by management.

Requirements

• Diploma in Mechanical/Mechatronics Engineering is preferred
• 3 to 5 years working experience in manufacturing environment

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Job Description

Our client provides multimedia video cloud to world-wide users. Its video cloud is one of the world's largest and leading video platforms, providing media storage, transcoding and streaming services. Our Client is committed to building the next generation video processing platform and the largest live broadcast network to provide an excellent experience for billions of users around the world.

The role of solution engineer requires in-depth understanding of the video cloud business architecture, helping internal/external business parties to deepen product awareness, promote product optimization, and output the best solution in combination with product capabilities.

As a technical expert, you will be working closely with client's global video cloud R&D and engineering team to promote continuous optimization of products, tools, and processes.

Job Responsibilities

1. Responsible for the design and development of video cloud based solutions;

2. Responsible for collaborating with developers and solving the problems encountered by developers during integration with video cloud services as well as the quality issues in the production service process;

3. Responsible for management of suppliers' demands, sorting out the issues in the integration with suppliers, promoting the development and optimization of technical specifications, and reducing service problems;

4. Have overall awareness, help establish a Quality Service (QS) evaluation system, improve the efficiency of problem handling, and effectively promote the resolution of quality and efficiency problems in the research and development process;

5. Organize structural learning points and consolidate developer handbook to form a common knowledge base for the solution team.

Job Requirements

1. Bachelor’s degree or above in Computer Science or other related majors, with solid fundamental computer science knowledge, strong logical thinking and learning abilities, and understanding of software design patterns;

2. Good professional accomplishment and self-drive, strong technical enthusiasm, able to continue learning and self-improvement;

3. Hiving excellent data analytical skills, issue identification ability, with prior experience in full-chain data collation and data-related tools;

4. Good knowledge of networking fundamentals and protocols (eg. TCP/IP, HTTP/HTTPS, etc.). Familiar with audio & video multimedia protocol, CDN distribution acceleration, RTC and other technologies is preferred;

5. Experience in project management, video cloud related experience or enterprise integration experience is preferred;

Job Description:

• Conduct technical analysis and calculations to ensure system performance and safety.
• Create detailed engineering drawings and specifications for fabrication and installation.
• Conduct product testing and evaluation to ensure compliance with regulatory standards.
• Provide technical support to clients, including troubleshooting, system optimization, and maintenance recommendations.
• Stay up-to-date with industry trends, advancements, and best practices in fire suppression technology.
• Provide technical support to clients, including troubleshooting system issues, conducting inspections, and recommending system upgrades or modifications.
• Troubleshoot and resolve any mechanical issues that arise during the development or manufacturing process.
• Test and evaluate prototypes to ensure functionality, safety, and efficiency.

Requirements:

• Diploma or Degree in Mechanical Engineering or a related field
• Minimum 3 years of experience in mechanical engineering or product design, preferably in fire suppression or a related industry
• Proficiency in computer-aided design (CAD) software and/or Solidworks for creating engineering drawings
• Familiarity with relevant codes, regulations, and standards related to fire suppression systems is an advantage
• Knowledge of manufacturing processes for mechanical components.
• Excellent problem-solving skills and attention to detail.

Roles & Responsibilities:

• Able to preparare quotation and for client requirements.
• Able to read technical drawings.
• Knowledge in Autocad drawing.
• Liaise with the technical team to carry out the project.
• Coordinate & assist workers for smooth operation.
• Find supplies to purchase goods.
• Profeicent in English and communication.
• Support tasks assigned by Technical Manager.
• Prepare daily report and report to tecchnical Manager.
• Able to work independently and

Job Description & Requirements

Position Overview: The Quality Control Specialist for the central kitchen plays a pivotal role in ensuring the production of high-quality food products that meet established standards and exceed customer expectations. This position is responsible for monitoring and maintaining quality assurance processes, conducting inspections, and supporting continuous improvement efforts within the central kitchen.

Key Responsibilities:

1. Product Inspection: Conduct thorough inspections of all food products at various stages of production, from raw ingredients to finished dishes, to ensure they meet quality and safety standards.

2. Quality Assurance: Develop and implement quality control procedures and guidelines, ensuring compliance with industry regulations and company standards.

3. Sampling and Testing: Collect samples for laboratory analysis or sensory evaluations, such as taste tests, to identify any deviations from the set quality benchmarks.

4. Documentation: Maintain detailed records of inspections, test results, and other quality-related data. Generate reports and share findings with relevant departments.

5. Problem Identification: Identify and report any issues, defects, or deviations from quality standards. Collaborate with production teams to address and rectify issues promptly.

6. Process Improvement: Provide input and suggestions for process improvement, and participate in cross-functional teams to drive continuous improvement initiatives.

7. Training and Education: Conduct training sessions for kitchen staff on quality control procedures and best practices, ensuring all team members are aligned with quality standards.

8. Food Safety Compliance: Ensure adherence to food safety regulations and standards, including HACCP, by overseeing and validating sanitation and hygiene practices within the kitchen.

9. Supplier Collaboration: Collaborate with procurement and supplier teams to monitor the quality of incoming ingredients and packaging materials, and implement corrective actions when necessary.

10. Equipment Maintenance: Participate in the maintenance and calibration of quality control equipment and tools used in inspections and testing.

Qualifications and Requirements:

· Proven experience in food quality control or quality assurance, ideally in a central kitchen or food production setting.

· Strong understanding of food safety regulations, including HACCP principles.

· Excellent attention to detail and analytical skills.

· Effective communication and teamwork abilities.

· Proficiency in using quality control tools, such as laboratory equipment and data analysis software.

· Problem-solving skills and the ability to drive process improvement.

· Knowledge of food production processes and ingredient characteristics.

· Willingness to work in a dynamic, fast-paced environment.

The Quality Control Specialist for the central kitchen is an essential contributor to ensuring the safety and satisfaction of customers by maintaining consistently high-quality food products. This role demands a keen eye for detail, a commitment to compliance, and a dedication to continuous improvement in food production processes.

EA LICENSE : 18C9520

EA REG: R1765753