Total 59,672 design engineer job vacancies in Singapore

Roles and Responsibility:

• Preparation of Piping Material Specification (line classes), specifications/requisitions for bulk and special piping components, vendor quotation evaluations and verifications of vendor documents and piping material take-off prepared by engineers for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
• To calculate/validate pipe wall thickness, branch reinforcement etc.
• To prepare line index, Material summary (BM/BQ).
• To carry out engineering support work during the construction phase of the project.
• Performs other tasks that may be assigned or designated to him/her by his/her superior.

Requirements:

• Minimum of Ten (10) years in the field of piping engineering involving material, design, production work, 3D model review, stress and construction engineering support.
• Bachelor’s Degree in Mechanical Engineering or equivalent combination of education and experience.
• Good knowledge and experience of ASME, ASTM, BS and other relevant standards.
• Basic knowledge of AutoCAD/AP3D/S3D.
• Basic knowledge of 3D Model review through Navisworks or SPR.
• Strong analytical and reasoning abilities.
• Good leadership skills.
• Good interpersonal and communication skill.

• Report to Construction Manager
• Manage and oversee construction activities near existing SPPG tunnel/GTP
• Coordination between client, consultant and sub-contractor(vendors)
• Ensure compliance with safety procedure and regulations
• Carry-out regular inspections and regular checks of concerned construction activities
• Resolve technical and engineering issue
• Ensure proper documentation (including Risk assessment/Method statement) and record-keeping of construction activities
• Ensure the activities comply with the local Authorities’ quality, environment, health & safety requirements and Clients’ General Specification
• Ensuring Permit to Work (PTW) is verified and valid for assigned duties.

Job Requirements:

• Degree in Civil Engineering from a recognized university, accredited by the Singapore PE Board
• Registered Resident Engineer with IES and valid certification in Singapore (Mandatory)
• Minimum of 1 year of Engineering experience
• 2 years of experience in the supervision of construction projects preferred
• Progress oriented, team player
• Technical expertise and knowledge in Civil Engineering Construction especially piling/RC works
• Proficient in Microsoft Offic and Auto CAD
• Attained CSCPM/BCSS/Confined space/Work At Height
• Good interpersonal skills and hardworking
• Location : Woodlands
• Project : Viaducts

Job Description:

• PC setup & troubleshooting, application setup & configurations for end-users
• Oversee the IT infrastructure and equipment which includes Print server, Desktops, Laptops & windows workstations
• Managing Active Directory, DNS, DHCP, IP Addressing, Group Policy
• SCCM Asset Management, WSUS Server & Patch Management
• Assist in maintenance of anti-virus platform for servers and client PCs, conduct test and deployment of Microsoft patches for servers and clients
• Review and monitor the IT infrastructure to ensure that it is secure and optimized
• Support network & server of the company, plan, recommend and implement improvement to the IT infrastructure of the company
• Perform Backup & Restoration
• File Server Access Management, Firewall and Security Administration
• Other Ad-hoc duties as assigned

Job Requirements:

• Candidate must possess at least Bachelor's Degree in Computer Science, or Information Technology
• Preferably have 3 years of experience in IT operations, PC Support & Troubleshooting, infrastructure, network administration and end user support.
• Experience in Desktop, Laptop Support & Troubleshooting, O/s & Application configuration
• Experience in Windows10, Routers, Firewall, Switches, Wireless communication, WAN, FTP, Proxy
• Willing to perform Overtime

We regret that only shortlisted candidates will be notified.

Interested applicants, please send in your resume stating your date of availability, current and expected salary.

Job Description

• Industry/Organization Type: Manufacturing/Production
• Position Title: Technical Support Engineer (Electronics)
• Working Location: Serangoon North
• Working Hours: Monday – Friday, 8.30 am – 6 pm
• Salary Package: Up to $4,500 + VB
• Duration: Permanent

Key Responsibilities

• Manage technical transfer of products/projects in assembly and testing, including coordination with customers.
• Provide ongoing technical support in manufacturing and testing phases to optimize product builds.
• Assist the Quality Control (QC) team in resolving Return Material Authorization (RMA) issues.
• Support the Quality Assurance (QA) team in matters related to compliance, regulatory requirements, customer interactions, and audits.

APPLY NOW!!!

• Minimum of a Diploma in Electronics Engineering.
• At least 2 years of relevant work experience in the electronics manufacturing industry.
• Technical competence in handling manufacturing, project transfers, and troubleshooting within a production environment.
• Experienced in PCBA manufacturing and testing.
• Ability to communicate effectively with customers on technical matters.
• Experience working in an ISO13485 and FDA-regulated manufacturing environment is preferred.
• Strong communication and problem-solving skills.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69907 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Join us as we pursue our exciting new vision to make machine data accessible, usable and valuable to everyone. We are a company filled with people who are passionate about our product and seek to deliver the best experience for our customers. At Splunk, we’re committed to our work, customers, having fun and most importantly to each other’s success. Learn more about Splunk careers and how you can become a part of our journey!

As a Splunk Solutions Engineer (SE), you’ll be the primary technical resource for the assigned Enterprise accounts specifically covering the regional assigned market Indonesia. Our clients and partners span all business sectors and sizes.

This is an opportunity to work at a company that is changing the way information supports business decisions. You will be responsible for actively driving and running the technology evaluation stage of the sales process, working in conjunction with the sales team as the key technical advisor and advocate for our products and services.

Splunk Sales Engineer will answer technical inquiries from customers regarding Splunk technology, features, solutions, applications as well as eloquent Splunk technology and product positioning to both business and technical users. You will identify all technical issues of your assigned accounts to assure complete customer happiness through all stages of the technical sales cycle, and you should also establish and maintain positive relationships with our customer's technical staff. You will work closely together with the Partners, responsible for the opportunity if required.

Responsibilities: I want to and can do that!

• Demonstrate Splunk products and services to customers on site, remotely via webinar sessions, and at field events such as conferences and trade shows
• Willing to travel to visit partners, prospects and customers, and to engage in onsite customer and partner work when required
• Experience responding to functional and technical elements of RFIs/RFPs is also relevant.
• High-reaching with a proven record in technical software/hardware sales and knowledge of technology
• Strong presentation skills and able to communicate clearly and expertly
• Ability to be organized and analytical, and eliminate sales obstacles using creative and adaptive approaches
• You should be comfortable working for a multifaceted technical organization with a fast-growing partner and customer base

Requirements: I’ve already done that or have that!

• At least 5 years of proven experience in selling and supporting software products to IT organizations
• Experience in delivering sales and technical enablement workshop or webinar to customers
• Proficient in either IT Security or DevOps solutions.
• Experience and familiarity with IT management products and services.
• Experience with networking, server, application and development technologies
• Domain expertise with IT Operations, Application Management and/or security/compliance is desirable.
• Indonesia Bahasa speaker

Job Description:

• Involvement in Production testing scope.

• Operates and maintains simple test equipment appropriately to measure and perform RF PCBA & module tuning and testing

• Perform duties with minimal supervision

• Integrates continuous improvement concepts and techniques into work

• Performs other duties as assigned

• Set up and run HASS to qualify the modules under testing conditions.

• Conduct a Functional Acceptance Test to complete the module test process.

• Maintaining the operations of the ATE stations

• To generate test reports

• Integrates continuous improvement concepts and techniques into work

• Performs other duties as assigned

Job Requirement:

• Education background : ITE or Diploma in Electronics / Communication Engineering or related studies

• On the job training will be provided.

• Prior experience working in electronics (modules) production / manufacturing environment

• Competent handling of miniature with tweezers

• Ability to handle and solder components using a microscope

• Ability to produce consistent quality workmanship on repetitive manual processes

• Work Location: Ang Mo Kio

Knowledge, Skills, Competencies

• Able to understand mechanical and electrical wiring diagram with some basic understanding of cable termination.

• Experience with network design and networking exposure will be added advantage

• Good knowledge with Operating platform such as Microsoft Windows and Linux

• Proficiency in operating measuring equipment or software such as network analyser, serial protocol analyser and oscilloscope

Element has an opportunity for an Engineer to join our rapidly expanding team in Singapore

In this role , you will perform variety of routine and non-routine testing assignments within civil testing operations and esure timely and accurate test results under minimal direct supervision

This role is based in Sungei Kadut Loop , Singapore.

Job Duties:

• Be accountable for accurate and timely release of testing data to customers and oversee standard and/or routine technical problem solving activities
• Interact with customers on technical issues and questions and provide input and support on business development opportunities with new or existing customers
• Provide formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders
• Assist in the professional development of novice technicians and engineers within the local laboratory and utilize an assortment of skill, methods, procedures and materials in advanced testing analysis
• Be adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions

Job Requirements:

• Possess a Bachelors of Science degree in a science or testing related field with a minimum of 2 years’ pertinent post degree engineering experience, or advanced academic/professional qualifications
• In-depth understanding of testing concepts and able to apply academic knowledge within the context of Element’s business
• A team player with advanced computer and communication skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

• Assist, manage and review Project Management Plan to monitor all aspects of project including progress, cost management (i.e. Claims & VO verification and procurement negotiation), quality, safety, human resource, environmental and etc.
• Assist Project Director and Project Manager in conceptualizing and executing project schedule, cost, procurement and quality management of project.
• Assist, manage and review project management tool and produce reports to monitor progress of project and identify project critical path.
• Assist in tracking of Architectural Instructions issued and counter propose if necessary.
• Tracks, Interpret and Solve any Drawings discrepancies (RFI) between all Trades.
• Management of project staffs and assists them in fulfilling their potential and beyond.
• Monitoring and ensuring sub-contractors of different trades are able to proceed with their works on site.
• Checking and monitoring wastage of materials on site to ensure no unnecessary wastage of materials.
• Assist PM to chair various committee meetings such as weekly sub-contractors’ coordination meeting, safety committee meeting and etc.
• Leads Weekly Technical Meetings with consultants and client representatives to resolve issues between Architectural, Structural and M&E trades
• Together with PM prepares and presents Biweekly Project Schedule Meeting to Client representatives, consultants and Client QS
• Independently ownership, coordinate & monitor of all ERSS works and relating submissions and requirements between designer and on-site implementation up to dismantling.
• To liaise and coordinate with professional designer for all temporary shoring works and permanent structure works.
• Liaise with clients, consultants, government authorities and sub-contractors to ensure work progression is on schedule and project milestones / deliverables completed according to shareholders’ expectation.
• Hands-on site day-to-day coordination on architectural, structural, M&E, interior design and fit out works, inclusive resolving all RFI
• Acts as liaison between surrounding neighbourhoods (all nearby properties / owners)
• Preparation of official letters to sub-contractors, consultants and client.
• Carry-out structural inspection with RTO/RE
• Other ad-hoc activities as when required by the company.

Responsible for maintenance/trouble shooting of plant equipment (mechanical and electrical systems) at water treatment and waste water treatent plants.

Prepare technical reports and submission to the clients.

Purchasing of materials as required.

Good technical knowledge and codes of safe work practice.

Maintain good housekeeping.

Minimum Diploma qualification.

Must possess WSQ certificates (BCSS, Confned Space Supervisor/Assessor, WAH)

Driving Licence Class 3 preferred.

5 years relevant working experience at Public Utilities Board (PUB) waterworks and water reclamation plants.

Job Description

• Undertake new product development or be involved in sustaining engineering/CIPs.

• Research new automation technologies and continuous improvement for performance and system optimization.

• Develop plan for equipment installation and validation at customer site or main business site.

• Perform a full lifecycle product development (design, develop, test prototypes, manufacture and implement).

• Design for manufacturing (DFM), design for assembly (DFA) and Concurrent engineering.

• Developed fabrication drawings, assembly drawings and layout drawings.

• Selection and sizing of standard components available off the shelf.

• Documentation: Machine BOM, Work Instruction, PPT for presentation.

• Work with customer to gather requirements, review designs with customers, gather feedback and create execution plan.

• Work with customers and team to solve problems during installation and volume manufacturing.

• Drive equipment optimization, quality assurance, cost reduction activities and improve user experience activities.

• Estimate budget and scope of project.

• Other duties/activities as assigned by management.

Requirements

• Bachelor’s degree in Mechanical Engineering or relevant degree.

• Proficient in using 3D CAD modelling Creo (Creo and Solidworks will act as advantages) and associated Finite Element Analysis tools.

• Ability to read & to interpret engineering data, scientific journals, technical procedures, international test standards & type approval specifications.

• Great attitude and desire for self-improvement and independent problem solving.

• Desire to learn and implement product testing, validation and qualification methodologies.

• Willingness, ability, and desire to travel internationally to work with customers and team members.

• Good track record in:

1. Structural, kinematics and dynamic analysis and FEA simulation.

2. Strong in thermodynamic.

3. Geometrical tolerance and dimensional analysis (e.g. stack up error).

4. Engineering material selection.

5. Design troubleshooting.

6. Application of analysis tools like FMEA, DOE.

3 years and above of experience is preferred, fresh grads are welcome to apply.

Experience in Automation will be advantageous.

• Responsible for all major mechanical and electrical and instrumentation equipment
• Lead a team of technical executives/technicians for troubleshooting works
• Manage the purchase of major supply and repair items alongside with supervision and execution of preventive and condition monitoring of major electrical equipment
• Handle hands-on preventive maintenance and breakdown maintenance work
• Coordination with clients and subcontractors to meet the site/project requirements
• Carry out rectification of faults within a specified time
• In-charge of troubleshooting of M&E system
• Responsible for planning, execution and supervision of all facilities management and operational activities
• Responsible for project cost control and service standards
• Any other ad hoc duties assigned

Job Requirements

• Degree or Diploma in Engineering.
• 3-5 years of relevant working experience
• Technical knowledge of M&E systems(including, but not limited to, fire protection systems, AV systems and ACMV systems) is an added advantage
• Able to perform shift work if required
• Preventive Maintenance Troubleshooting

• Performs specific and moderate portions of a broader assignment of an experienced engineer.
• Gathers and correlates basic engineering data using established and well-defined procedures.
• Works on detailed or routine engineering assignments involving calculations and relatively simple tests.
• Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignements.
• Identifies discrepancies in results.
• Provides guidance to entry level engineers.
• Performs work in accordance with agreed upon budget and schedule with little supervision.
• Independently performs all the tasks necessary to complete primary design
• elements for engineering works. 
• Performance at this level requires developmental experience in a professional position.

Mechanical Engineer requirements

Salary Range $3,500 - $5,000

Key Responsibilities

• Involved in full cycle mechanical design from conceptualization, designing, research and development.

· Evaluate final product’s overall performance, testing, reliability, safety and commissioning.

• Define design approach for new product and platforms and generate design specifications
• Execute new product designs personally, and oversee outsourced resources where appropriate
• Execute quick turn prototyping, 3D samples, debugging, verification testing, and performance characterization of new designs
• Support current platforms with enhancements and improvements where needed
• Support manufacturing engineering as necessary and provide appropriate tools and techniques to the service organization
• Execute/manage compliance testing and documentation
• Adhere to best practices for documentation and version control

Minimum Requirements and Qualifications

• Bachelor's degree in Mechanical / Mechatronics Engineering
• 5+ years hands-on design and development of Analog and Digital circuitry and/or embedded systems.
• Knowledge & Skills in SolidWorks, 2D and 3D software or more.
• Proficient with laboratory instrumentation, tooling fabrication, die-casting, extrusion, plastic injection moulding and metal stamping process.
• Utilize various tools of specialization (CREO/ DFM/ DFMEA/ Tolerance Analysis/ Simulation etc.) to design, validate and improve existing designs
• Proficient with MS Word, MS Excel, PowerPoint

Additional Qualifications

• Experience in LED, Automation , Thermal and optical design

Key Responsibilities:

• Assist the design team in developing and researching design concepts.
• Help prepare project proposals and design presentations.
• Support the creation of 3D model, floor plans, renderings, and design model

Qualifications:

• Currently pursuing or recently graduated with a degree in Interior Design or a related field
• Proficient in design software (e.g., AutoCAD, SketchUp, Photoshop, etc.)
• Strong design sensibility and creativity
• Excellent teamwork and communications skills, able to thrive in a fast-paced environment
• Passionate about learning and committed to interior design

Job description:

• Managing pneumatic system portfolios & dealing with technical specification and definition of industrial systems, products and solutions including system and product design
• Providing engineering solutions & handling technical & products issues
• Leading design team to come up with better system design and ensuring design meet market needs
• Providing sales & project & design support
• Ensuring company profitability and aligning with global product strategy

Basic salary up to $8000

5 days work week

Multinational corporation

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use and/ or disclosure of personal data by AlwaysHired and its affiliates for the purpose of job application processing and administrative purpose, in compliance with the relevant provision of personal data protection act.

Job Descriptions

Design and engineering management

• Act as the primary link between the construction team and external design consultants.
• Act as the primary link between the project team and the client’s design team on all design related items.
• Provide clear direction as to approach, schedule and priorities to the external design consultants and manage their works to ensure deliverables are received in good time to facilitate construction.
• Engage with Project/Site Engineers and Construction management team to incorporate site constraints and preferred construction techniques/methods into the design
• Resolve design related queries
• Verify design and review deliverables for completeness and accuracy

Site operations coordination and monitoring

• Engage with Site Engineers and Construction Management team for design requirements; gather input and discuss technical requirements
• Provide technical guidance and guide team to execute design requirements
• Periodic inspection of works being carried out and check operations and execution for adherence with design drawings
• Participate / guide team to participate in weekly meetings with site team, provide information about engineering and design aspects and present progress on scheduled works

Compliance review and monitoring

• Review all designs for compliance with engineering principles and relevant design codes
• Review all drawings for adherence with CAD standards and Leighton’s operating procedures
• Guide team to file designs / drawings, maintain record of delivery and timesheets for development and delivery schedule
• Guide team to resolve instances of non-compliances

Job Requirements

• Mechanical, Electrical or Civil Engineering Degree recognized by Singapore Professional Engineers Board
• Total Work Experience: 10 years of experience preferably in buidling and Data Center industries.
• Knowledge of BIM requirement aspects of engineering and design
• Experiences in executing design, engineering, installation and T&C of Data Center

Job Description:

We are currently seeking talented individuals with:

• A PhD in many-body quantum physics or similar
• Able to do literature review and summarize the main findings from the literature
• Competence in numerical many-body quantum physics
• Competence in disseminating the outcomes of the research including in peer-reviewed academic publications of international standing
• Ability to support the research team
• Perform other tasks as required by the Principal Investigator

Job Requirements:

To apply for this position, applicants should be:

• Proficiency or understanding many-body quantum systems out of equilibrium
• Expertise in simulating many-body quantum systems
• Proficient communication and writing skills in English
• Possess excellent problem-solving abilities as well as strong attention to detail.
• Someone who can work independently while still collaborating effectively within a team environment when needed.

You will be part of the University's Office of Admissions, to provide support during student's admission exercises:

Responsibilities:

• Provide administrative support for interviews including scheduling, maintaining of interview files, verification of applicant documents, contacting candidates, and responding to interview-related inquiries
• Provide logistical support to interviewers, including preparing of materials
• Coordinate and manage student helpers
• Provide logistics support for campus visits and admissions events
• Respond to emails, phone calls, and in-person inquiries related to Admissions, when required
• Carry out other duties as assigned

Requirements:

• Possess a recognized Degree certificate
• Working experience in a business development/admissions role will be preferred but not compulsory
• Possess the ability to work independently and handle multiple tasks
• Possess strong communication and interpersonal skills
• Be resourceful, driven, independent and yet a good team player
• Able to work on Saturdays

You will be part of the University's Office of Admissions, to provide support during student's admission exercises:

Responsibilities:

• Respond to emails, phone calls, and in-person inquiries related to Admissions
• Manage scheduled phone calls through Novocall System
• Coordinate and schedule appointments with inquirer
• Attend to walk-in enquiries, and re-direct to other Admissions Officers if needed
• Maintain high standards of customer service and adhere to communication procedures and standard operating guidelines
• Assist in updating frequently asked questions (FAQ) for email enquiries
• Provide logistics support for campus visits and admissions events
• Carry out other duties as assigned

Requirements:

• Possess at least Diploma certificate
• 2 - 3 years of customer service experience and/or education industry
• Good communication and interpersonal skills
• Meticulous and organized
• Confident and able to work independently
• 5 days’ work per week

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

- Able to provide advice on space planning, design conceptualization and materials. - Project management - Ensure smooth coordination for project workflow - Meet deadlines - Knowledge in AutoCAD, Sketch up, Photoshop or BIM

- Self-motivated

- Experience preferred.

- Training will be provided

- Proficient in English and Mandarin to liaise with Mandarin speaking clients

- Excellent interpersonal and communication skills

- High commission

- Career advancement for achiever

- Singaporean, PR and Malaysian may apply.

Benefits Summary:

• Up $5000 + Bonus + Benefits
• 5 Days work week
• Working Location: North, East

Responsibilities:

• Define inspection and test plan for product
• Design jigs for critical to quality alignments
• Evaluate engineering changes of assigned product.
• Provide technical expertise of manufacturing process to PAG
• Any ad-hoc duties as required

Interested candidates, please submit your updated resume in MS format by using the Apply Now Button.

Follow us on Facebook for more info:

https://www.facebook.com/EC-Recruitment-Pte-Ltd-113771667194961/

Text us on for more details:

https://wa.me/6582693981

Follow us on Telegram for more job opportunities:

https://t.me/ecrecruitment

Our dedicated and approachable E&C consultants will get back to you soon for a confidential discussion.

By submitting your application or resume to us, you will be deemed to have agreed and consented us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

**We regret to inform that only shortlisted candidates would be notified. **

• Responsible for corrective and preventive maintenance of plant machinery and monitoring of critical spare parts.
• Carry out corrective maintenance on plant machines.
• Support on preventive maintenance and machine repair.
• Attend to machines installation, modification, safety items, laboratory equipment, etc.
• Identify and carry out improvement items for machines.
• Liaise with machine agents for repair or maintenance of machines.

Requirements:

• Degree in Electrical/Electronic or Mechanical Engineering
• Prefer 2-3 year(s) of experience in maintenance/repair of machine in a manufacturing environment.
• Good trouble shooting, presentation and analytical skills.
• Good knowledge of PLC programming skills.
• Self-disciplined, independent and able to work under pressure.
• Able to communicate with all levels of staff.
• Able to commit to 12 hours shift work.

Manufacturing Industry

Loyang Area

Interested Applicants, kindly email your detailed resume to [email protected]

Tempserv Pte Ltd

License No : 06C3745

Audris Teo/ EA Personnel No: R1102063

Project Engineer

Basic: $2,700 - $3,800
Working Hours: 5 Days Mon-Fri (830am to 530pm)
Location: Jalan Kilang Timor, Redhill (Office) / Current project - Jurong or Woodlands Area

Responsibilities

• Able to manage project with minimal supervision;
• Attends external project kick-off meetings, meetings with clients or consultants as well as technical and co-ordination meetings, project meetings and internal project closure meeting;
• Ensures the adherence to the safe work procedure (SWP) established; and implement risk control measures;
• Resolves site problems proactively in a timely manner;
• Ensures the timely preparation of project progress and other reports;
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation;
• Co-ordinates daily activities of workers’ duties and to ensure that they are performed in a proper manner;
• Makes daily checks on work progress, housekeeping and safety implementation on site with safety personnel;
• Assists in cost control by reducing materials wastage, usage of tools and equipment, etc;
• Request and initiate orders of materials required for projects;
• Documentation on project progress and damage;
• Ensures proper project documentation including email communication;
• Any other related duties as assigned.

Requirement

• Degree in Mechanical Engineering or. Diploma in Mechanical Engineering with working experience.
• Knowledgeable in MS Office, MS Project and able to read construction drawing.
• Training Provided

The Supreme HR Advisory Pte Ltd || 14C7279

R22111009 Cheng Kai Ling

Role: Service Engineer - ACMV
Duration: 1 year contract (Renewable and Convertible)
Location: Multiple locations - Changi Business Park Crescent, Asian Square Tower, Orchard Rd
Working hours: 12 hours shift; 4 days a week. 4/3/4/3 shift pattern
Salary: Up to $3.5k + 1 month bonus

As an HVAC Technician, he will maintain mechanical and electrical equipment for commercial HVAC systems at facilities by conducting proactive performance testing and ongoing scheduled maintenance.

Core Responsibilities:

• Install, repair, adjust, and maintain small electric or pneumatic control systems used for building. This includes heating, ventilation, air conditioning, and refrigeration systems and equipment.
• Conduct ongoing maintenance on building HVAC equipment to ensure proper equipment operation and compliance with all applicable codes, regulations, and work safety.
• Troubleshoot equipment failures and determine the best course of action for equipment modifications.
• Use existing procedures to solve straightforward problems while having a limited opportunity to exercise discretion.

Requirements:

• Nitec / Diploma with 1 - 2 years of job-related experience.
• Meet the physical requirements of this role including stooping, standing, walking, climbing stairs/ladders, and the ability to lift/carry heavy loads of 20kg or more.
• Ability to follow basic work routines and standards in the application of work.
• Communication skills to exchange straightforward information.
• Working knowledge of Microsoft Office products. Examples include Word, Excel, Outlook, etc.

We regret to inform you that only shortlisted candidates will be notified.

Interested candidates, please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile > https://go.persolkelly.com/job/apply/8809

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394

• Reg. R24124631 (Moh Cheng' En, Desean)