Total 48 Others/Any maintenance repair job vacancies in tampines singapore

JOB RESPOSIBILITIES,

Planiing And Undertaking Schedules Maintenance

Responding To Breakdowns

Diagnosing Faults

Supervising Engineering And Techical Staff

Creating Maintenance procedures

Review the work progress on daily basis

Plan ahead to prevent problems and resolve any emerging ones

Assist all project / maintenance related sale inquiries from initial quote status through to order placement, and off to the client and follow up closely after quote submitted

Handle all project/maintenance renewal related matters

• Aircraft Maintenance Engineering License with at least 5 years signing off in Singapore, CAAS licensed preferred and experience in performing aircraft heavy/line maintenance.
• Perform maintenance on customer aircraft in complying with Company
• Perform inspection, make adjustment and repair, replace components, and correct any malfunction or deficiency with and without power applied to the aircraft.
• Access and re-install aircraft components, which obstruct the performance of the assigned tasks.
• Perform basic mechanical and electrical removals and installation.
• Document work performed per quality procedure manual.
• Perform other tasks cleaning aircraft using approved materials, methods, and equipment, and loads and secures ballast and/or freight as required.
• Assist with fueling/ defueling aircraft as required.
• Assist Aircraft Technicians in troubleshooting and repairing of aircraft.
• Assist with repairs on components detached from the aircraft, for example, flaps, ailerons, elevators, rudders, doors, and leading edges.
• Work on aircraft as well as in component shops.
• Assist with complex repairs at on-site and off-site locations.

JOB RESPONSBILITY:

• Perform maintenance on customer aircraft in complying with Policies & Procedures and Aviation Authorities Rules and Regulations.
• Perform inspection, make adjustment and repair, replace components, and correct any malfunction or deficiency with and without power applied to the aircraft.
• Access and re-install aircraft components, which obstruct the performance of the assigned tasks.
• Perform basic mechanical and electrical removals and installation.
• Document work performed per quality procedure manual.
• Perform other tasks cleaning aircraft using approved materials, methods, and equipment, and loads and secures ballast and/or freight as required.
• Assist with fueling/ defueling aircraft as required.
• Assist Aircraft Technicians in troubleshooting and repairing of aircraft.
• Assist with repairs on components detached from the aircraft, for example, flaps, ailerons, elevators, rudders, doors, and leading edges.
• Work on aircraft as well as in component shops.
• Assist with complex repairs at on-site and off-site locations.
• Assist other employees in the performance of their duties within area(s) of qualification.
  
  WORK LOCATION: SINGAPORE
  
  PREFERED SKILL
• You have minimum Aircraft Maintenance Engineering License with at least 5 years signing off in Singapore, CAAS licensed preferred and experience in performing aircraft heavy/line maintenance.
• You have had experience working on aircrafts.
• You must Hold College/ Diploma and / or equivalent academic qualification.
• You have interpersonal skills necessary to establish and maintain effective working relationships with internal and external customers.
• You have planning and organizational skills necessary to coordinate workload around multiple assignments.

Duties & Responsibilities

1. Handles Accounts Payable and its administration
2. Conversion of GRN and entering of invoices in Microsoft BC
3. Match Supplier invoices with purchase orders/delivery order and prepare payment vouchers
4. Reconciliation of Supplier’s Statement of Accounts with vendor ledger records
5. Maintain and upkeep of accounts payable invoices, debit/credit note
6. Assist with Quarterly and Year-end Stock-take
7. Ensure proper filing and archiving of documents
8. Assist with audit and other tasks as assigned by Superior

Requirements:

• Good interpersonal and communication skills
• Meticulous, conscientious and can-do attitude
• Able to work independently as well as in a team
• Proficient in Microsoft office and preferably with Microsoft BC experience
• Ability to work in a fast-paced environment

Your responsibilities include, but not limited to:

1) Responsible for conducting field (on-site) audit on outdoor cleansing activities, including safety compliance, to ensure that quality service is consistently maintained;

2) Responsible for investigating Defect Notices and propose corrective actions to Operations Executive to prevent recurrence of similar complaints;

3) Responsible to reducing recurrence lapses through continuous improvement of work methodology e.g. case studies, min 2 projects a year

4) Perform compliance audit to ensure the operation sites and company leased residential units are complying to the regulatory requirements and/or contractual obligations.

5) Participate in the deployment of special projects such as pandemic disinfection and chemical spillage post clean-up cleaning

6) Conduct QEHS briefing, with relevant multimedia content, on site to ensure worker competencies are met, to conduct monthly

7) Conduct QEHS Inspections on site to ensure compliances to in-house and regulatory requirements

Requirements

• Minimum Advance Certificate / Higher Nitec or equivalent education

• Must possess driving license class 2B and motorcycle

• Basic knowledge of Microsoft Office applications (Able to prepare simple reports)

• Applicants must be comfortable working outdoors

• Required to do night audit periodically

• Require to be on standby for ad-hoc activation for special cleaning job

• Positive attitude, willing to learn and able to work independently

Mininium 3 years experience in maintenance, servicing and repairs of Domestic Transfer Pumps, Booster Pumps, Rainwater Sump Pumps, Overflow Sump Pumps and Ejector Pumps and the related Control Panels. Servicing and repairs of Domestic Water Tanks and Generator sets.

Possess Class 3 Driving Licence.

Speak and write Simple English

Able to work 6 days week.

Must be able to standby on 24 hours for activation of emergency by customers for No Water Supply, Low Water Pressure or dirty water.

Possess leadership skill.

Able to work with foreign migrants.

SUMMARY
Under general supervision, oversees and coordinates repairs and moderately complex maintenance on a wide variety of building and facility equipment, fixtures, and systems.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

LEADERSHIP AND MANAGEMENT RESPONSIBILITIES

Recruitment and Retention:
· Recruit, interview and hire Maintenance Technicians.
· Communicate criteria to recruiters for Maintenance Technician position candidates.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
· Kronos.

Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor maintenance staff to deliver excellence to every internal and external customer.
· Create and manage succession plans for Maintenance Technician functions.

Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Facilities/EHS Manager, peers and team member on team member’s contribution to the team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.

Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.

FUNCTIONAL MANAGEMENT RESPONSIBILITIES

Cost Management:
· Identify creative ways to reduce cost by streamlining processes and systems (i.e. modification of responsibilities or consolidation of tasks, elimination of non-value-added processes, or complete re-engineering of processes and systems).
· Utilize tools to monitor departmental cost and cost trends, striving continuously to improve value.

TECHNICAL MANAGEMENT RESPONSIBILITIES

· Responsible for supervision of diversified electrical, air conditioning, refrigeration, machine, pipe fitting and facilities and grounds maintenance functions, as well as personnel performing diversified machining operations such as drilling, punching, milling, lathe, grinding, welding, cleaning, painting, and sheet metal fabrication of tooling and equipment.
· Supervise the activities of assigned personnel, coordinates efforts, provides technical guidance, and reviews progress of assignments.
· Conducts preventive maintenance inspections and performs preventive maintenance actions as required.
· Directs the movement of furniture, materials, and equipment as required.
· Train and supervise employees in new techniques, safe work habits and good housekeeping practices.
· Coordinate the work of outside contractors.
· Resolve operational problems requiring emergency action.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.

MINIMUM REQUIREMENTS
High school diploma or equivalent required; and three to five years experience in maintenance field, including supervision; or demonstrated skills required to perform the job.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Senior Manager/ MTS to be part of our Facilities Department diverse team of talent. You will be the Subject-Matter-Expert for the Operation & Maintenance.

What you will be working on:

• Manage facilities operation team with 12-hour shift duties for 24 hours support to Fab.
• Manage round check on site, check on all consoles and servers of facilities control and monitoring systems in shift basis.
• Alarm handling, emergency response and actions in case of excursion happened by managing 1st line incident handling, breakdown repair works as well as actively participate in ERT incident.
• PM management - Ensure scheduled preventive maintenance (PM) and Corrective Maintenance (CM) executive and tracking till closure.
• Prepare operation summary report, including PM execution, alarm counts and analysis, SPC and analysis, round check, call in services, utilities usage and others if needed, say ESG. Besides, engineering or trouble shooting activities are also part of the report. The report shall be prepared, including daily, weekly, monthly, quarterly and annually.
• Training and Certification program for on duty team members.
• Coach, mentor and train team members on technical know-how to ensure department technical competencies are up to the highest standard.
• Manage activities isolation or lock out/tag out for after office hours contractor works.
• Review, recommend and implement changes to workflow to achieve company and department goals in relation to cost saving and operational improvement.
• Complies with internal SOPs, external regulatory and EHS requirements.
• Participate in continuous improvement projects.
• Perform/support quality investigations in a timely and thorough manner.
• Working closely with systems owners, Quality team ensuring optimal plant performance as well as troubleshooting issues and drive root cause analysis
• Support GEMBA walk and other duties as necessary

More About You:

• Master/ Degree in Electrical/ Mechanical/ Electronic/ Chemical/ Environmental Engineering
• Min 10 years of relevant experience in Semiconductor Wafer Fab environment
• Min 5 years’ management experiences
• Wafer fab operation experiences is a must
• Strong technical knowledge for at least in two disciplines of four major disciplines – electrical & control, mechanical, water treatment, gas & chemical systems.

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Job Title: Software Developer

We are a dynamic and forward-thinking company, specializing in cutting-edge software development and system architecture. We are seeking a talented and experienced Software Developer to join our team and play a key role in designing and developing scalable, reliable, and maintainable software solutions. If you are passionate about technology and eager to work in a collaborative environment, we’d love to hear from you.

Responsibilities:

• Research, design, and develop computer and network software or specialized utility programs.
• Analyze user needs and develop software solutions, applying principles and techniques of computer science, engineering, and mathematical analysis.
• Design and develop the architecture for software systems using .NET, Angular, Vue.js, and web and mobile app technologies, ensuring they meet business requirements and are scalable, reliable, and maintainable.
• Create technical specifications and diagrams that outline the structure and behavior of software systems.
• Update software, enhance existing software capabilities, and develop and direct software testing and validation procedures.
• Collaborate with developers, project managers, stakeholders, and computer hardware engineers to ensure systems are delivered on time, within budget, and meet specifications and performance requirements.
• Review and approve technical designs and code changes, ensuring they adhere to established standards and best practices.
• Conduct code reviews and mentor developers on best practices and techniques.
• Evaluate and recommend software tools, frameworks, and technologies to enhance the development process.
• Work with hardware engineers to integrate hardware and software systems and develop specifications and performance requirements.

What We’re Looking For:

• Bachelor’s or Master’s degree in Computer Science, Information Technology, Programming & Systems Analysis or a related field.
• Proven experience in software development and architecture design with .NET, Angular, and Vue.js.
• Strong knowledge of software architecture principles, design patterns, and best practices.
• Hands-on experience with software testing, validation, and system integration.
• Excellent problem-solving skills and the ability to collaborate with cross-functional teams.
• Experience with cloud computing platforms (AWS, Azure, Google Cloud) is a plus.
• Relevant certifications, such as AWS Solutions Architect, are a plus.

Why Join Us?

• Competitive salary and benefits.
• Opportunity to work on exciting and innovative projects.
• Collaborative work environment with growth and learning opportunities.
• Access to the latest technologies and tools.

As a Cyber / Network Security Maintenance Associate Engineer, you are required to provide maintenance support to clients. You will play a key part in Technology Services Delivery team to ensure security solution maintained at the highest quality and standard.

What will you do?

• Perform research on latest vulnerabilities
• Provide technical consulting and advise 
• Provide post-installation troubleshooting and technical support by phone or remotely
• Keeping up-to-date with the latest news and threats in the security industry 

Job Description:

• Update and control of Mechanical Engineering specification,procedure and drawings in CMMS (Computerized maintenance management system).
• Register, control and maintenance of assets management in CMMS.
• Material Management including consumables,parts and spare units in CMMS.
• Respond to breakdowns, diagnosing faults, record and report in CMMS.
• Review and approve of service, repair and overhaul equipment, record and report.
• Manage staff “shift or on-call' work as necessary.
• Plan and supervise scheduled maintenance, improvement and investment works.
• Contract and evaluation of cost including technical proposal on improvement and investment works.
• Manage vendors, suppliers and contractors including performance appraisal.
• Manage staff KPI (Key Performance Indicator), appraisal and training plan.
• Ensuring compliance with machinery and equipment statutory requirements.
• Ensure compliance with QEHS (Quality, Environment, Health and Safety) legislation.
• Manage routine 5S at the maintenance workshop, store and work area at site.
• Provide training to Supervisors and Technicians if needed.
• Responsible for maintaining and improving availability of rotating equipment across the Plant.
• Develop and ensure data quality for documents uploaded in the CMMS.
• Develop Mean Time Between Failure, Mean Time to Repair, Failure Mode Effect Analysis template for rotating equipment and implement it.
• Develop and monitor the performance of the rotating equipment.
• Deliver quick and effective technical solutions and proactively interface with other discipline leads for resolving issues.
• Identify bad actors in the plant and reliability improvement.
• Initiate the engineering management of change and execute the changes for plant improvement and modification work.
• Develop and maintain Standard Operating Procedures and Risk Assessments for the maintenance of rotating equipment.
• Plan and execute all rotating equipment preventive and corrective maintenance.
• Condition monitoring of rotating equipment through online and offline vibration analysis, oil analysis and other techniques.
• Develop training plans for Operations & Maintenance Teams.
• Prepare estimates and budgets for rotating equipment.
• Ability to work weekends, holidays and respond to callouts on a non-routine basis.
• Other duties as assigned.
• Safety is a core value at Veolia, and a precondition for employment. You are expected to uphold the Veolia Always Safe rules and set an example to all colleagues in your daily work routine
• Ethics and compliance are two areas where our rules and our standards are strictly non-negotiable. You are expected to stick to ethics and compliance rules and standards which ultimately mean doing your job properly and conducting our business like true professionals, whatever our missions and our place in the Group

The L2 application support analysts/engineers have ownership to resolve incidents/issues in productive environment, monitoring to ensure application availability, stability, they coordinate and work with other DevTech support units (e.g. L3 teams) in order to resolve Incidents and Problems that affect the Client services.

Your key tasks 

• Hold Accountability and End to End ownership of any product related problems which clients report via the respective ticketing systems.
• Banking functional knowledge and experience is a must specially in the area of Credit , Trading , Derivatives, transaction reporting as well as cash management & payments and this is required to resolve business transactions related issues from our wealth clients.
• to be able to handle EOD batches which are running post COB hours and to be on standby as well until the batch deliverables are fully transferred to the respective downstream of the Wealth Clients or Financial Institutions.
• Able to work in different shifts (night on-call, day shift and ad hoc weekend support).
• Apart from Incidents, to be able to handle Service requests, RFIs as well as assist Problem Manager whenever product specific support is required.

• Salary: Up to $3,500 Basic + $220 Fixed Allowances
• Location: Jurong Island, MNC Chemical Manufacturing Company
• Working Hours: Monday to Friday, 8:30 AM to 5:00 PM

Are you a skilled maintenance technician looking for an exciting opportunity to work with a leading chemical manufacturing company? We are assisting our client to seek for a dedicated professional to join their dynamic team and contribute to the smooth operation of chemical plant.

Key Responsibilities:

• Technical Repairs: Utilize your technical skills to repair and maintain site assets, ensuring everything runs smoothly.
• Troubleshooting: Service and inspect electrical and instrument equipment, addressing faults and breakdowns to minimize production downtime.
• Optimization: Apply your problem-solving skills to optimize manufacturing equipment availability.
• Collaboration: Participate in site meetings, risk assessment studies, and review meetings, and coach less experienced employees and contractors.
• Safety & Reporting: Plan and execute daily maintenance and small projects safely, conduct job risk assessments, generate and manage repair work reports, and close SAP work orders as assigned.

Requirements:

• Higher NITEC in Electrical or Mechanical related field.
• Minimum 5 years of maintenance experience within the chemical industry.
• Experience in instrumentation maintenance and operating hazardous plants.
• Ability to handle contractors/vendors and attend urgent calls.

Interested candidates can forward their CVs in MS Word format to [email protected]

Reg No. R1983718

Triton AI Pte Ltd

License no. 21C0661

Your responsibilities include, but not limited to:

1) Responsible for conducting field (on-site) audit on outdoor cleansing activities, including safety compliance, to ensure that quality service is consistently maintained;

2) Responsible for investigating Defect Notices and propose corrective actions to Operations Executive to prevent recurrence of similar complaints;

3) Responsible to reducing recurrence lapses through continuous improvement of work methodology e.g. case studies, min 2 projects a year

4) Perform compliance audit to ensure the operation sites and company leased residential units are complying to the regulatory requirements and/or contractual obligations.

5) Participate in the deployment of special projects such as pandemic disinfection and chemical spillage post clean-up cleaning

6) Conduct QEHS briefing, with relevant multimedia content, on site to ensure worker competencies are met, to conduct monthly

7) Conduct QEHS Inspections on site to ensure compliances to in-house and regulatory requirements

Requirements

• Minimum Advance Certificate / Higher Nitec or equivalent education

• Must possess driving license class 2B and motorcycle

• Basic knowledge of Microsoft Office applications (Able to prepare simple reports)

• Applicants must be comfortable working outdoors

• Required to do night audit periodically

• Require to be on standby for ad-hoc activation for special cleaning job

• Positive attitude, willing to learn and able to work independently

The Project/Service manager is a highly driven individual who is part of the service delivery team that ensures all contracts are actively managed and fronts customers directly. The service manager is required to have IT experience and broad knowledge across infrastructure and cybersecurity technologies. He/she shall be the single point of contact for internal and external stakeholders while bearing overall responsibility for the project financial health and lead the project from commencement to completion.

Responsibilities:

• Ensure all assigned projects are initiated and executed with proper handover/takeover
• Ensure all necessary project purchases are planned and executed
• Ensure all project billing and invoices are issued timely
• Establish and prepare maintenance agreements and plans to deliver contractual obligations to clients such as preventive maintenance plans and monthly reports
• Track and manage the all maintenance contracts and provide quality support to clients
• Provide regular project progress updates to project stakeholders, customers and internal management team
• Manage the scope definition and change control mechanism when dealing with scope creep
• Escalate and discuss project overrun issues, scope creep, integration issues, resource requirements with NCS management team
• Work closely with Operations teams to ensure all incidents are closed timely within the contractual service level agreement (SLA)
• Able to work with sales and operations team to identify inventory end-of-life support, pain points encountered and discuss suitable alternatives with clients
• Ensure respective vendors support and NCS operations team is ready to support new contracts
• Provide concise and professional communications with customers on issues encountered
• Update monthly projects financial forecasts and improve project margins where possible to meet financial KPIs
• Adhere to best practices, techniques and standards throughout entire project duration

• Support HR Manager and Cluster Heads in outdoor recruitment, onboarding, retention, and resignation

• Work with HR Department in consolidating relevant documents for hiring of new joiners

• Preparation / Set up and attend of job fairs

• Implementation of initiatives in attracting potential candidates

• Attend to employee requests pertaining to human resources policy and project sites feedback.

• Actively conduct employees' engagement and retention

• Prepare reports on recruitment and retention

• Achieve monthly recruitment requirement target set

• Perform any other ad-hoc duties assigned by the HR Manager

Requirements

• Conversant in Microsoft Office (Word, Excel and PowerPoint)

• Proactive and Independent

• Able to Multi-Task, high degree of adaptability & thrive in a fast-paced environment

• Excellent time management, organizational and interpersonal skills

• Only Singaporean need to apply

• Flexible hours

• Position : ALL WELCOME - Maintenance Specialist (CNC turning, milling, honing or deep hole drilling for metal products in oil and gas industry)
• Location : Tuas
• Working hours : 5 days - Monday - Friday: 7:30am to 5:15pm
• Salary (commensurate with experience) Up to $4800 (Basic up to $4000 +$110 Transport Allowance) + Performance Bonus
• Duration : Permanent
• Industry : MANUFACTURER AND REPAIR OF MACHINERY

Main Responsibilities:

• Monitor the machines and company equipment operational performance and condition
• Conduct preventive maintenance to machine and company equipment as per schedule
• Review and update all existing machine maintenance documents
• Prepare and design the spare parts for machines and company equipment
• Report any unsafe conditions and practices to Production Manager
• Assist of production and purchasing department of manufacturing / purchasing spare parts
• Monitor spare parts stock level and raising purchase order
• Managing, delegating and training the maintenance group
• Involve in the implementation and continuous maintenance of HSE Management System
• Perform any other duties assigned by the Production Manager

Requirements

• Diploma in Mechanical/Electrical or Mechatronic Engineering
• 5 years’ experience in machine repair and maintenance
• Have training with Quality Management and its related Quality Procedures is an advantage
• Knowledge to repair and maintain machines e.g. CNC Turning, Milling, Honing, Drilling is an advantage.
• Knowledge of precision machining machineries, equipment and facilities
• Knowledge of repair and maintenance on machineries and equipment
• Knowledge of Environment, Health & Safety

Email your resume to [email protected]

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jane Chua

Associate Consulting Director (APAC)

License no: 13C6684

EA Personnel: R2197224

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Born from a single question, innovation is in our DNA. Having recently celebrated our 10-year anniversary, we are a diverse and quality-conscious company, which has set itself the goal of transporting temperature-sensitive medicines in a more reliable and sustainable way. Long story short, we help save lives and preserve the environment.

Our goal? To continue to advance towards zero loss in the pharma supply chain, worldwide.

If you're a Repair and Maintenance Manager within APAC who has a strong continuous improvement mindset and experience in repair processes - this could be the role for you:

Here's what you'll do:

• Coordinating the worldwide repair stock
• Coordinate Repairs with Service Centers
• Inventory Management for Repair Material
• Daily SC container to be overhauled stock level check
• Internal Training of Repair processes
• Monitor and control repair center activities, quality repair check, repairing process improvement, cost optimization, etc.
• Collaborate with coworkers and third-party agents to ensure efficiency, excellent operational service, and continued customer relationship development
• Involved in preparation and/or attendance in partners business reviews
• Updating, maintenance and cleaning of Master data in IT System. And supporting on the further improvements.
• Execution and monitoring of all repair transportation material and to be overhauled container movements
• Training/Onboarding of new repair centers worldwide
• QBR`s with most important suppliers
• Repair Station visits and trainings (if requested)

This is what you'll need:

• Minimum commercial apprenticeship and/or bachelor’s degree
• Freight Forwarding Background
• Familiarity with domestic and international geography including countries and major cities
• Ability to work in a fast-paced and deadline-driven office environment
• Excellent verbal & written communication skills in German & English
• Phone etiquette
• Ability to multi-task, prioritize, and manage time effectively
• Proficient in Microsoft Office (Word, Excel, and Outlook)
• Extreme attention to detail, including the ability to predict and circumvent issues before they occur and taking the proper corrective action
• Ability to be highly productive while keeping cool under pressure

What we can offer you:

• Flexible working hours for work/life balance
• Interdisciplinary and varied projects
• Diverse and global work culture/ environment
• Possibility to work for an environmentally conscious company
• Unique opportunity to actively shape processes

Why SkyCell:

We are looking for people who challenge the status quo and thrive on making a difference to people and the world around us. That’s where our Operations team play a pivotal role and you could be a part of it.

Our Operations Team is responsible for the Transportation, Warehousing and Logistics Procurement part of SkyCell. We ensure that SkyCell containers always perform to their best by coordinating processes with the Service Centers and Positioning partners. We are monitoring each unit closely through our global network of Service Centers and partners that are carefully evaluated and trained in all relevant processes. Furthermore, we make sure that our units are available at any time, at any destination as per our customer’s needs. We manage actively our reverse logistics, taking into consideration costs, lead time and Service Center capabilities. We build up customs processes and optimize our growing network on regular base. Additionally, we make sure that temperature data logging of our units is running smoothly in order to track the containers and reliably provide customers with data of their shipments.

We are Innovative Award Winners:

We’re driven by our core values and guided by our collaborations, purpose, and employees. Our commitment to changing the face of medical supply chains, making them safer, more secure, and more sustainable resonates strongly with every one of our employees; we’re therefore incredibly proud to have been certified as a Great Place to Work alongside being awarded a sustainability rating of Platinum by EcoVadis.

If you would like to know more about us, visit www.skycell.ch and search #WeAreSkyCell on LinkedIn.

To become part of our journey and make a difference – click apply and we will be in touch!

Please contact Lucy Slough, Talent Acquisition Specialist if you have any questions ([email protected]).

SkyCell AG is proud to be an equal opportunities employer, we celebrate and support diversity and are passionate about creating an inclusive environment for all employees. We do not discriminate based upon race, religion, colour, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, disability, or any other applicable legally protected characteristics.

For this position we only consider direct applications

To provide maintenance support to clients. The Cyber Maintenance Engineer will play a key part in Technology Services Delivery team to ensure security solution maintained at the highest quality and standard.

• Perform research on latest vulnerabilities
• Provide technical consulting and advisory on cyber security and firewall products
• Provide post-installation troubleshooting and technical support 
• Keeping up-to-date with the latest news and threats in the security industry

• Remuneration: Up to $5800 + Fixed Allowances $280
• Rewards: Enjoy AWS and Variable Bonus
• Location: Jurong Island, Transport Provided at Designated Point
• Company: MNC Chemical Manufacturing Industry

Role Overview:

Our client is seeking a dynamic individual to lead the mechanical team in overseeing inspection and maintenance activities within chemical plant. If you have a passion for ensuring operational excellence and thrive in a collaborative environment, this role is for you.

Responsibilities:

• Lead a team of mechanical supervisors and contractors in executing plant inspection and modification works promptly and safely.
• Manage the plant painting program to uphold facility integrity.
• Coordinate with various stakeholders to ensure seamless execution of plant modification works while prioritizing safety and facility integrity.
• Conduct training sessions to enhance the skill and competency levels of staff and contractors.
• Implement management systems aligned with ISO standards, ensuring adherence to quality and environmental regulations.
• Maintain meticulous documentation and filing of inspection records using our Data Management System.

Requirements:

• Bachelor's degree in Mechanical Engineering or Material Engineering.
• Minimum of 2 years' experience in fixed equipment and piping inspection within the chemical, petrochemical, or oil and gas industry.
• Proficiency in corrosion under insulation (CUI) or coating inspection preferred.
• API certification is advantageous.
• Strong analytical and problem-solving skills.
• Excellent communication abilities with cross-functional teams and contractors, fostering a spirit of collaboration and teamwork.

Interested candidates can forward their CVs in MS Word format to [email protected]

Reg No. R1983718

Triton AI Pte Ltd

License no. 21C0661

• Remuneration: Up to $5800 + Fixed Allowances $280
• Rewards: Enjoy AWS and Variable Bonus
• Location: Jurong Island, Transport Provided at Designated Point
• Company: MNC Chemical Manufacturing Industry

Role Overview:

Our client is seeking a dynamic individual to lead the mechanical team in overseeing inspection and maintenance activities within chemical plant. If you have a passion for ensuring operational excellence and thrive in a collaborative environment, this role is for you.

Responsibilities:

• Lead a team of mechanical supervisors and contractors in executing plant inspection and modification works promptly and safely.
• Manage the plant painting program to uphold facility integrity.
• Coordinate with various stakeholders to ensure seamless execution of plant modification works while prioritizing safety and facility integrity.
• Conduct training sessions to enhance the skill and competency levels of staff and contractors.
• Implement management systems aligned with ISO standards, ensuring adherence to quality and environmental regulations.
• Maintain meticulous documentation and filing of inspection records using our Data Management System.

Requirements:

• Bachelor's degree in Mechanical Engineering or Material Engineering.
• Minimum of 2 years' experience in fixed equipment and piping inspection within the chemical, petrochemical, or oil and gas industry.
• Proficiency in corrosion under insulation (CUI) or coating inspection preferred.
• API certification is advantageous.
• Strong analytical and problem-solving skills.
• Excellent communication abilities with cross-functional teams and contractors, fostering a spirit of collaboration and teamwork.

Interested candidates can forward their CVs in MS Word format to [email protected]

Reg No. R1983718

Triton AI Pte Ltd

License no. 21C0661

We are seeking a highly motivated and independent professional to manage the administrative aspect of our Engineering Business -

• Manage information in spreadsheets and reports
• Keep records and reports up to date
• Handle administrative issues in their area of expertise
• Carry out clerical duties, including answering phones to address customer queries and prepare documents such as drafting of quotations, invoices etc.

Basic Microsoft office skills in Word and Excel are necessary.

Industry: Chemicals

Function: Maintenance

• Leadership: Lead and manage a team of mechanical supervisors and contractors to ensure efficient execution of plant maintenance, modification, and construction activities. Foster a culture of safety, quality, and productivity within the team.
• Coordination: Collaborate closely with plant operators and other maintenance groups to schedule and execute maintenance and modification works, prioritizing safety and minimizing disruption to plant operations.
• Technical Expertise: Conduct mechanical studies and analyses to optimize plant facilities according to technical specifications and business requirements. Identify opportunities for improvement and implement effective solutions.
• Troubleshooting: Perform in-depth technical investigations on equipment issues, evaluate findings, and develop actionable recommendations to prevent recurrence and improve reliability.
• Training and Development: Develop and deliver training programs for staff and contractors to enhance their skills and competencies, ensuring they are equipped to perform their roles effectively and safely.
• Emergency Response: Respond promptly to plant emergency calls and troubleshoot mechanical issues within tight timelines, demonstrating quick thinking and effective problem-solving abilities.
• Compliance: Implement and maintain management systems in accordance with ISO 9001, ISO 14001, ISO 45001, and SS651 standards, ensuring adherence to regulatory requirements and best practices in maintenance management.

• Degree in Mechanical Engineering with at least 2 years’ relevant experience in mechanical facilities maintenance in oil/ petrochemical/ power industry
• Hands on experience in performing troubleshooting and repair work of static equipment and rotating equipment (e.g. heat exchangers, pressure vessels, agitators, pumps, compressors, and blowers)
• Ability to communicate effectively with staff across different functions and contractors, fostering a collaborative environment conducive to teamwork and knowledge sharing
• Proficient in Microsoft Office applications
• Basic knowledge of SAP applications is advantageous

• Responsible for the maintenance and repair of electrical equipment and systems in the chemical plant.
• Inspect and troubleshoot electrical systems, including power distribution, motors, control panels, and lighting.
• Perform preventive maintenance tasks to ensure the reliability and safety of electrical instrumentation system.
• Carry out instrumentation application study and modification of plant facilities according to technical specification and business requirements.
• Coordinate with other departments and contractors for maintenance and repair projects.
• Maintain accurate records of maintenance activities and equipment history.
• Ensure compliance with safety regulations and industry standards.

• Bachelor's degree in Electrical & Electronics Engineering or related field.
• Minimum 3 years of experience in electrical maintenance, preferably in a chemical plant.
• Basic knowledge in programmable logic controller (PLC) and human machine interfaces (HMI) will have an added advantage
• Proficient in troubleshooting and repair of electrical systems.
• Excellent problem-solving and analytical skills.
• Good communication and teamwork skills.
• Ability to work in a fast-paced environment and handle multiple tasks.

Interested candidates please send in resume to [email protected]

Triton AI Pte Ltd
License no. 21C0661

• Permanent Role with AWS, work allowances and lots more perks & benefits.
• Work location in Jurong Island, Company Transport Provided at Jurong East.
• Entry Level for Degree in Electrical Power Engineering will be considered.
• Experienced candidates must be familiar with circuit power calculation.

• Perform mechanical maintenance and repair activities on plant equipment and machinery.

• Conduct regular inspections and preventive maintenance to ensure equipment reliability and minimize downtime.
• Carry out mechanical study and modification of plant facilities according to technical specification and business requirements.
• Performs technical investigation on plant equipment troubles, evaluation of findings and recommend countermeasures to effectively prevent recurrences of similar problems
• Collaborate with cross-functional teams to coordinate maintenance activities and optimize plant efficiency.
• Respond to plant emergency calls and resolve mechanical troubles within tight schedule.
• Adhere to safety guidelines and ensure compliance with regulatory requirements.

• Bachelor's degree in Mechanical Engineering.
• Minimum 2 years of experience as a Mechanical Maintenance Engineer in a petrochemical, oil or power industry.
• Strong knowledge of mechanical systems and rotating equipment.
• Experience in troubleshooting and performing preventive maintenance.
• Excellent problem-solving skills and ability to work in a fast-paced environment.
• Effective communication and teamwork abilities.

Interested candidates please send in resume to [email protected].

Reg No. R1983718

Triton AI Pte Ltd

License no. 21C0661

• Permanent Role with AWS, work allowances and lots more other perks & benefits.
• Work location in Jurong Island, Company Transport Provided at Jurong East.