Total 98 Manager quality assurance engineer job vacancies in SIN01 - Singapore- Tuas West Ave (SIN01)

Roles & Responsibilities

Job Responsibilities

· Lead and drive the team for continuous improvement on system and process, conduct monthly QPR meeting and review typical quality issues and follow up with team for improvement.

· Work as quality representative of tool room to manage customer audit, ISO audit and internal audit, prepare the team for the audit and subsequent activities.

· Monitor KPI of tool room and attend annual MR meeting to report tool room KPI performance.

· Lead QA/metrology team for inspection activities and work closely with engineering team for tool improvement.

· Study critical characteristic of new product drawing requirement, propose steel safe strategy with past similar tool experience into tooling design.

· Manage customer complaint and attend customer meeting related to quality or metrology issues.

· Monitor supplier quality performance and issue corrective and preventive action report to drive continuous improvements.

· Perform audits on supplier’s process to ensure quality control and quality assurance systems are in place

· Publish tool fabrication quality standards and ensure suppliers understood and comply with the requirements

· Assist in evaluation and qualification of new supplier.

· Other duties as and when assigned by Supervisor or Management

You may be authorized to:

· Contain suspected, non-conforming products and prevent from further processing.

· Stop new orders which do not conform to requirements.

Requirements

· Degree or Diploma in Quality Engineering or relevant

· Minimum 5 years of relevant experience in a plastic injection molding industry

· Knowledge and experience in GD&T, SQC tool

· Certified Internal Auditor for ISO 9001, ISO14001 and ISO 13485.

· Ability to apply problem solving technique and provide solutions under minimal supervision.

· Good written and oral communication skills

· Organized, decisive, logical, Independent and possess leadership, organization and communication skills

Task Management

• Develop and implement a comprehensive product quality improvement plan, aligned with the organization'soverall goals and objectives.
• Lead and participate in cross-functional teams to identify and analyse root causes of quality issues.
• Developing and implementing corrective and preventive actions to prevent future quality issues.
• Monitoring and reporting on product quality metrics to track progress and identify areas for improvement.
• Conduct audits and assessments to identify and address potential quality risks.
• Collaborate with suppliers to ensure their products meet our quality requirements.
• Collaborating with various teams such as engineering, manufacturing, classification societies, and suppliers to ensure consistent quality throughout the product lifecycle.
• Stay up-to-date on the latest quality improvement methodologies and tools.
• Track and analyse warranty data for reporting, change implementation to new products and continuous improvement
• Identify and communicate process and product improvements.
• Continually seek to identify areas of quality risk and resolve them before they impact on the vessel.
• Delivery of regular communications & reports to the Key internal relationships.
• Establish and maintain high standards of quality and control of cost within budget limits.
• Carry out customer familiarization of our products.
• Occasional travel to vessels country operating area to conduct fact finding on their operations and acceptance of our products in operation for quality.

Interpersonal Management

• Communicate effectively: This involves actively listening, clearly conveying information, and providing constructive feedback with all levels of staff.
• Build trust and rapport: This involves being genuine, respectful, and reliable.
• Ensure liaison with shipyard personal and management to ensure product quality performance is consistent with the aims of the organization.Develop and maintain key external relationships with partners, customers, contractors, suppliers and official
• bodies and organisations.
• Negotiate on behalf of the company, be able to accept realistic compromises when necessary.
• Develop a strong network of industry suppliers, subcontractors, and contacts.

Information Management

• Develop and manage quality improvement documentation and reporting.
• Develop full understanding of vessel/product specifications and performance.
• Develop full understanding of relevant classification and survey body rules that affect the quality performance of our products.
• Manage warranty claim documentation and continuous improvement feedback documentation to the shipyard.
• Personal Management
• Look for opportunities to continue to develop professionally.
• Show personal accountability for the achievement of objectives.
• Keep up to date with the industry best practice and monitor actions of competitors.

• To promote a Zero Harm culture & best practices through the implementation of a tailored safety, quality and environmental management system including the development and implementation of appropriate policies & procedures to ensure a safe and efficient workplace.
• To ensure regulatory compliance & due diligence to safety, health, quality, dangerous good/hazardous substances and environmental obligations.
• To liaise with all business units on matters relating to safety, quality and environment including potential non-compliance of a regulatory nature.
• Compliance with all relevant safety, quality, environmental & P&C policies & procedures to ensure a safe work environment at all times.
• Actively liaise with all departments to ensure quality control, quality assurance and safe practices are adhered to at all times.
• Work with A-Gas management to implement its policies, procedures, work instructions, mission and goals.
• Lead by example in demonstrating personal qualities, behavioural traits and A-Gas values & behaviours.
• Timely management reporting in the manner and form as required from time to time.
• Perform site inspections as required.
• Actively participate in internal & external project meetings and provide sound recommendations on SQE initiatives and/or highlight any deviations & possible risks if any.
• Manage & maintain integrated certified Safety, Quality, Environmental management systems to ensure continued compliance to ISO 9001, ISO45001, ISO14001, ISO17025 (NATA), and other relevant standards like ISO 31000 where applicable.
• Identify and maintain compliance to relevant WHS, Environmental & other acts, regulations, codes of practices & guidelines etc.
• Audit SQE Management System, including reviewing, monitoring, measuring, reporting on performance.
• Recommend and implement continual improvement to the SQE system, work instructions and associated processes.
• Promoting awareness of SQE requirements, communicating and consulting with all staff & other stakeholders on SQE processes, documentation and regulatory requirements.
• Development and implementation of SQE documentation relevant but not limited to procedures, plans, hazard and aspect identification, risk assessments, emergency preparedness & response, design & development, management of change, control measures, management review including ad hoc measures based on current environmental occurrences.
• Actively lead & participate in Operational Safety, Process Safety, Risk Assessment, HAZOPs, Pre-Purchase Risk Assessments, Management of Change & Design & Development, SQE incident investigation & root cause analysis and processes.
• Active participation and collaborating to provide SQE / technical advise as required to the Lab Team, Customer Service, Operations, Engineering, Rapid Recovery and wider A-Gas Group & other relevant stakeholders.

Authorities and Responsibilities

1. Responsible for providing directives for the Quality Assurance Department in meeting management objectives.
2. Formulate, implement and evaluate quality strategies programs for the company.
3. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools.
4. Manage customer complaints, corrective and preventive action programs.
5. Administer and manage continuous improvement program for all QA processes.
6. Work closely with auditors, customers, production and suppliers to meet the quality requirements.
7. Manage sub-contractors for on-time supply of treatment process, as well as meeting technical requirement.
8. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
9. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
10. Review and approve disposition program / action for nonconforming products.
11. Ensure that processes needed for the quality management system are established and implemented.
12. Report to top management on the performance of the quality management system, and note needed improvements.
13. Ensure the promotion of awareness of statutory, regulatory and customer requirements throughout the organization.
14. Ensure and coordinate the implementation of risk assessment and risk control of medical devices

The Quality Assurance Manager plays a crucial role in business by ensuring that products meet certain standards of quality. He/She plans, directs or coordinates quality assurance programs and formulate quality control policies. He/She also works to improve an organisation's efficiency and profitability by reducing waste. He/She prepares and update quality documentation, basing their processes on a recognised standard such as ISO 9000 – Quality Management, published by the International Organisation for Standardisation. He/She supervises teams of inspectors who carry out the detailed assessment of products and their components at different stages of production. He/She recruits and trains supervisors, and provides them with documented quality standards as guidelines for their daily work. He/She also selects quality inspection tools and software to support the inspection team.

Competence Requirements:

• Diploma in Mechanical Engineering / Quality Engineering or equivalent.
• Minimum 6 years of solid experience in Quality Management in similar or related industry and 3 years in management level.
• Good knowledge in implementing and up keeping Quality Management System.
• Strong leadership and good interpersonal skills.
• A team player with strong sense of responsibility to ensure plant effective quality performance.

~ Assist in the implementation of company quality systems.
~ Conduct Quality Assurance audit.
~ Manage cause investigation for non-conformance.
~ Manage company quality systems.
~ Manage departmental activities and deployment.
~ Able to commute between Tuas Plant and Loyang Plant.

KEY DUTIES AND RESPONSIBILITES:

1. Lead and support QC team for daily QC activities by ensuring timely analysis, documentation, and review of RM/PM/FP/IPC/Stability and Process validation samples as per predefined standards.

1. Write and / or review controlled documentation related to laboratory operations or testing such as SOP's, analytical protocols, analysis reports, forms and validation documents.
2. Ensure compliance with FDA/USP/EP/ICH/ChP regulations and internal controlled procedures in the QC Laboratory.
3. Ensure readiness of QC Laboratory in internal / external audits.
4. Maintain data integrity in Quality Control activities and ensure appropriate traceability.

6. Initiate change control documents.

1. Lead and participate in stability program, method validations, technical transfer, method transfer and validation / qualification activities at the site.
2. Participate in New Product Introduction activities.

9. Lead and participate in laboratory investigations. Document laboratory investigation activities or review and approve laboratory investigation reports.

1. Participate in site corrective action / preventive action (CAPA) program. Ensure timely completion of all commitments made under QMS.
2. Lead and participate in key performance indicators for improving laboratory efficiency, monitoring equipment performance.
3. Lead QC Department training program by imparting training to new staff and comply with Analyst Qualification procedure.
4. Escalate the quality events, trends as appropriate to QC Head.
5. Remain abreast of current regulatory, pharmacopeia and cGMP trends.
6. Serve as subject matter expert on laboratory instrumentation and compliance issues.
7. Lead the QC team, evaluate competencies, assign responsibilities, monitor performance, counsel and provide guidance. Plan & monitor the training and development requirements, motivate staff appropriately to build a committed, motivated & competent team.
8. Participate in personnel decisions (interviewing, hiring, performance appraisals, promotions, termination, staff development, improvement plans) regarding subordinate staff.
9. Maintains a safe laboratory environment by implementing recommendations made by EHS.
10. Initiate CAPEX for equipment purchases.

20. Support in budget preparation for QC Laboratory.

21. Any other activities as and when assigned by the Superior.

JOB REQUIREMENTS:

· EDUCATION: Degree in science or related discipline (e.g. Chemistry, Chemical Engineering).

· EXPERIENCE: Minimum 8 years of quality control experience in pharmaceutical manufacturing industry and minimum 2 years of supervisory experience in managing team.

KNOWLEDGE & SKILLS:

• Possess working knowledge of GMP in the pharmaceutical industry.
• Excellent interpersonal and analytical skills, good verbal, and written communication skills.
• Working knowledge of qualification, calibration, and operation of laboratory equipment such as HPLC, GC, FTIR and Dissolution equipment.
• Working knowledge of method development, validation, verification of analytical method.
• Familiarity of 21 CFR Part 11 requirements.

WE NEED EXPERICEND FOR METAL WOKS , ALUMINMUM WORKS , WETRADE WORKS AND TILES WORKS FOR CONSTRUCTION (HDB / CONDO ) , NEED HAVE EXCELLENT IN CHINESE AND ENGLISH COMMICATION SKLII AND ACKNOWLEGE DESIGN WORK ,NEED TO GO THROUGH WITH SITE COODINATOR FOR BQ AND MATERAILS ORDER AND DRWAING SUBMISSION WORKS ，ALLOW TO FOLLOW AND COORDINATE WITH SITE WORKS AND PROGRESS WITH MAINCON , SITE MEETING

JOB RESPONSIBILITY

• Find tender opportunities GeBIZE.

• Prepare Tender and submission.

• Familiar with reinstatement and maintenance work.

• Review and analysis of Tenders Drawings & Documentation.

• Preparing Tender submissions and reviewing Procurement & Reviewing of Contracts, and ensuring compliance.

• Reviewing and commercial management of all projects, to ensure accurate and reliable reporting.

• Review all incoming correspondence from Clients, Consultants & Design Team to identify contractually critical items and to initiate replies.

• Estimating a range of projects in a variety of sectors.

• Improve and implement best practice commercial processes and accurate budgeting.

• Maintain accurate records and provide necessary detailed backup to support commercial tracking and costing.

• On Site measurement of Electrical Services.

• Preparation of specialist sub-contract work packages.

• Preparing monthly Commercial Progress reports.

• Other ad-hoc duties assigned by Construction Manager.

Responsibilities:

• Tracks and report daily work progress to the Yard Manager
• Ensures that the repair, conversion and construction jobs defined in the Specifications to be performed are carried out in accordance to the budget and schedule set by the Project Manager.
• Appoints approved subcontractors in consultation with Subcontracts Dept and Yard Manager and authorize purchase of equipment, spares and materials
• Ensures that records of work done are copied to the billing and project manager for their follow-up actions
• Responds to customer complaints and take corrective and preventive actions on errors of staff, subcontractors and suppliers
• Implements and maintain the Safety Management and Quality Management Systems.
• Communicate progress, highlights, and prioritizes between Hull Shop and Hull Afloat.
• Carries out special project documentation and case studies including work methods improvements.
• Ensures the safety of personnel through compliance with Occupational Safety and Health and Environmental Regulations.
• Ensures that Health, Safety & Environmental operating procedures are followed and counsel employees about compliance as necessary.

Requirements:

• Diploma or Degree in Marine Engineering/ or related engineering disciplines
• At least 4 years of relevant working experience in FPSO EPC projects
• Ability to read and interpret technical blueprint, plan tools/ equipment/ material take off, prepare project schedule, and input manpower loading
• Willing to go on overseas assignment (2 - 3 months)
• Understands the yard’s various functional systems, ship repair knowledge and related commercial matters.
• Good Degree of planning, organisation, control, problem-solving, decision-making, interpersonal, communication and people management skills required.
• Good knowledge in standards and class requirements on various works in ship repair industry.
• Good knowledge on safety requirements and standards for various works carried out in the yard.
• Possess skill to assess the cost and time required for the additional works.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Summary:

Seeking a Sales Manager / Engineer with a civil engineering background and sales experience in construction or building materials. This role involves liaising with consultants, professional engineers, architects, and façade contractors to drive sales and deliver presentations.

Job Responsibilities:

• Develop and execute sales strategies.
• Build relationships with industry professionals.
• Coordinate with the technical team to present aluminum and glass, façade and curtain wall solutions.
• Coordinate with project teams and provide regular sales updates.
• Follow up on claims and payments from clients to ensure timely processing.

Job Requirements:

• Degree in Civil Engineering
• Sales experience in construction / building materials
• Knowledge of façades, curtain walls, and glazing systems is an advantage
• Strong communication and presentation skills

HOW MIGHT YOU DEFY IMAGINATION?

Amgen is one of the world’s leading independent biotechnology companies. For over 4 decades, Amgen has pioneered biotechnology breakthroughs, to bring state-of-the-art medicines from laboratory to the patient. Amgen has not only discovered and developed innovative human therapeutics, but has invested in cutting edge manufacturing capability and support services to deliver these exciting therapies to medical teams around the world. Japan and Asia Pacific (JAPAC) is the fastest growing region in Amgen. Now we are hiring an Senior Manager (Process Development) in Singapore.

Senior Manager (Process Development)

What you will do

The successful candidate will apply subject matter expertise to support technology transfer and ongoing cGMP production of commercial protein biologics processes. Scope of work could include:

• Lead site PD activities for continuous improvement, productivity improvement, and product life cycle management.

• Lead and manage PD safety and compliance initiatives including inspection readiness.

• Manage and oversee PD related projects, ensuring they are completed on time, within scope, and budget. Analyze project outcomes to identify areas for improvement and drive continuous optimization.

• Represent PD on key projects or business processes.Stay abreast of industry trends and leverage expertise to ensure the success of the Amgen Singapore Site, focusing on reliability, efficiency, agility, and differentiation.

• Collaborate with cross-functional teams and network drug substance teams for process alignment by applying advanced technical principles and concepts.

• Site PD champion for digital literacy and new digital tools deployment for process monitoring, tech transfer, and facility modeling. Apply best practices to leverage data for more proactive and predictive approaches.

• Support regulatory filings, audits and inspections, and other CMC activities.

Win

What we expect of you

Basic Qualifications

· Doctorate Degree and 2 years of biologics process development or commercial-scale technical support experience Or

· Master’s Degree and 6 years of biologics process development or commercial-scale technical support experience Or

· Bachelor’s Degree and 8 years of biologics process development or commercial-scale technical support experience

Preferred Qualifications

· 6+ years in a technical role supporting manufacturing processes or 8+ years as a project manager for cross-functional teams within regulated environments (i.e., cGMP)

· Strong oral and verbal communication skills, interact effectively with diverse internal and external (suppliers) stakeholders.

· Knowledgeable in regulatory filings authoring and inspections. Experienced in biopharma product end to end lifecycle management (e.g product team lead).

· Familiarity in MoF single use facility operational aspects of commercial biopharma manufacturing and proficient in big data analysis.

· Working experience with capital / engineering project from early stage to project turnover.

· Stakeholder Communication: Maintain clear and effective communication with all project stakeholders in multicultural working environment, including providing regular updates and managing expectations.

· Agility and Learning: Promote a culture of agility and learning within project teams, encouraging innovation and adaptability in a dynamic business environment.

Thrive

What you can expect of us

As we work to develop treatments that take care of others, so we work to care for our teammates’ professional and personal growth and well-being.

• Vast opportunities to learn and move up and across our global organization
• Diverse and inclusive community of belonging, where teammates are empowered to bring ideas to the table and act
• Generous Total Rewards Plan comprising health, finance and wealth, work/life balance, and career benefits

Apply now

for a career that defies imagination

In our quest to serve patients above all else, Amgen is the first to imagine, and the last to doubt. Join us.

careers.amgen.com

Equal Opportunity Statement

Amgen is an Equal Opportunity employer and will consider you without regard to your race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status.

We will ensure that individuals with disabilities are provided a reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request an accommodation.

Responsibilities

1. Work effectively with Operations and Maintenance staff from the Lines as well as other engineering departments to investigate defects. To develop methods, propose modifications and improve maintenance strategies to rectify them.

2. Analyze and trend condition monitoring and defect data to identify reliability concerns. To develop methods, propose modifications and improve maintenance strategies to overcome them.

3. Draft technical work instructions for preventive and corrective maintenance activities.

4. Identify and implement cost-effective technologies to enhance the RTS Signaling, Communication & Control System performance.

5. Support LTA and RTSO projects in reviewing project design specifications and ensure their adequacy for the safety, reliability, maintainability and operability. To provide

other engineering support to the projects, as required.

6. Work in STRC Tuas, Singapore

Qualifications & Work Experience

1. Degree in Electrical & Electronics Engineering or equivalent from recognized institution

2. Previous Railway System experience would be advantageous

Job Description

• Responsible for ensuring that both CAG Employers Information

• Requirements (EIR), LTA Exchange Information Requirements (LTA EIR) and Project BIM Execution Plan (BEP) are implemented on site.

• Responsible for ensuring the capability of Contractors & sub-contractor BIM team are within the EIR documents & to the BEP.

• Responsible for ensuring that all related infrastructure and facilities are

• coordinated in BIM Model before commencement of actual works on Site.

• Responsible for ensuring that all Shop Drawings/Construction drawings are coordinated & updated in BIM Models before commencement of actual works on Site.

Job Requirements

• Minimum 10 years of relevant work experience, highly proficient in the use of BIM software and in establishing required processes and procedures and framework for BIM in projects.

• Familiar with various aspects of engineering e.g. Civil, Structural, Architecture, Mechanical, Electrical.

• Possess a Degree in Engineering / Architecture or equivalent.

• Highly motivated and able to work independently, a strong team player and able to handle fast-paced projects.

• Possess good interpersonal, written and verbal communication skills for collaboration with stakeholders across all levels and have good presentation skills.

• Shall be continuously under employment under any Consultant/Contractor for a minimum of 5 years and have successfully

• Instituted a BIM Company Deployment Plan as well as implemented Project BIM Execution Plan for at least 2 projects.

• Completed a certification course in BIM Management.

Job Description

• To plan, manage, oversee and be responsible for all aspects of the health, safety and environmental matters for the Project.

• To advise and report to the Superintending Officer and ensure the Project complies with its statutory obligations, Changi East safety requirements, airport authority's safety requirements and aerodrome safety standards.

• To manage the team of ASMs to ensure all duties and responsibilities required of them are discharged professionally and competently. He shall carry out regular meetings with the team and address any issues relating to their personal and work matters.

Job Requirements

• Minimum 10 years of Workplace Safety and Health (WSH) experience in the construction industry, preferably 5 years with developer/main contractor.

• Minimum 5 years of WSH experience in deep excavation works.

• Minimum 3 years of experience in managing a team of site safety personnel.

• Possess Engineering, Workplace Safety & Health Disciplines, or related qualifications.

• Registered with MOM as a Workplace Safety and Health Officer (WSHO) and has been practising as WSHO for at least 5 years.

• Has obtained certificate in development of a Risk Management Implementation Plan (bizSAFE Level 2) or equivalent.

• Has obtained certificate in DfS appreciation course.

• Good communication skills and a competent team leader

• Conversant with all procedures in Workplace Safety & Health Manual. To make conscious effort to be constantly updated on any subsequent revisions to the above-mentioned manuals, procedures and all applicable airport circulars

1. Lead and support QC team for daily QC activities by ensuring timely analysis, documentation, and review of RM/PM/FP/IPC/Stability and Process validation samples as per predefined standards.
2. Write and / or review controlled documentation related to laboratory operations or testing such as SOP's, analytical protocols, analysis reports, forms and validation documents.
3. Ensure compliance with FDA/USP/EP/ICH/ChP regulations and internal controlled procedures in the QC Laboratory.
4. Ensure readiness of QC Laboratory in internal / external audits.
5. Maintain data integrity in Quality Control activities and ensure appropriate traceability.
6. Initiate change control documents.
7. Lead and participate in stability program, method validations, technical transfer, method transfer and validation / qualification activities at the site.
8. Participate in New Product Introduction activities.
9. Lead and participate in laboratory investigations. Document laboratory investigation activities or review and approve laboratory investigation reports.
10. Participate in site corrective action / preventive action (CAPA) program. Ensure timely completion of all commitments made under QMS.
11. Lead and participate in key performance indicators for improving laboratory efficiency, monitoring equipment performance.
12. Lead QC Department training program by imparting training to new staff and comply with Analyst Qualification procedure.
13. Escalate the quality events, trends as appropriate to QC Head.
14. Remain abreast of current regulatory, pharmacopeia and cGMP trends.
15. Serve as subject matter expert on laboratory instrumentation and compliance issues.
16. Lead the QC team, evaluate competencies, assign responsibilities, monitor performance, counsel and provide guidance. Plan & monitor the training and development requirements, motivate staff appropriately to build a committed, motivated & competent team.
17. Participate in personnel decisions (interviewing, hiring, performance appraisals, promotions, termination, staff development, improvement plans) regarding subordinate staff.
18. Maintains a safe laboratory environment by implementing recommendations made by EHS.
19. Initiate CAPEX for equipment purchases.
20. Support in budget preparation for QC Laboratory.
21. Any other activities as and when assigned by the Superior.

EDUCATION:

Degree in science or related discipline (e.g. Chemistry, Chemical Engineering).

EXPERIENCE:

Minimum 8 years of quality control experience in pharmaceutical manufacturing industry and minimum 2 years of supervisory experience in managing team.

KNOWLEDGE & SKILLS:

1. Possess working knowledge of GMP in the pharmaceutical industry.
2. Excellent interpersonal and analytical skills, good verbal, and written communication skills.
3. Working knowledge of qualification, calibration and operation of laboratory equipment such as HPLC, GC, FTIR and Dissolution equipment.
4. Working knowledge of method development, validation, verification of analytical method.
5. Familiarity of 21 CFR Part 11 requirements.

Job Summary

The Channel Sales Engineer / Manager will be based in Singapore and will be responsible for developing the channel sales strategy, partnering existing distributors, developing new channels to provide compressed air solutions and grow our channel sales revenue.

He/she will act as an interface between Ingersoll Rand and our distributors in Singapore to drive strategic alignment and resolve outstanding challenges relating to sales, service, and operations.

Responsibilities

• • Develop and execute channel sales strategies for Ingersoll Rand’s Industrial Technology & Services (ITS) compressed air solutions in Singapore.
• Identify and develop new channel partners.
• Perform business analysis (e.g., SWOT) through collection of information from competition, distributors, customer buying behaviour, potential market volume, current market share and customer’s feedback.
• Achieve sales target set for area of responsibilities and industries by building and maintaining close relationships with distributors & customers to solicit for orders.
• Provide pre-sales technical assistance (incl. demonstration & technical presentations), product training and after-sales support to distributors and end-users.
• Report channel sales activities timely and accurately, submit monthly reports on channel sales, lost orders, and competition.
• Attending trade shows, conferences, marketing, and other events.
• Work closely with supply chain management, sales support and project engineer and order fulfilment team.

Basic Qualifications

• Degree / Diploma in Mechanical Engineering or related fields.
• Channel sales experience with industrial products such as Air Compressors, Dryers or other similar equipment.
• Driving license & own vehicle.

Travel & Work Arrangements/Requirements

Office-based, will be required to travel within Singapore or overseas for business needs.

Key Competencies

• Customer Orientation
• Ownership
• Business Awareness

What we Offer

• Equity Grant
• Employee Insurance (Incl. Dependants)
• Medical Health Screening
• Outpatient Medical & Specialist
• Dental
• Annual, Sick, Hospitalisation, Marriage, Exam, Compassionate, Maternity, Volunteerism Leaves.

Job Responsibilities:

1. Assisting and supporting technical sales team in terms of scope of supplies and costing with respect to electrical, automation requirements during the prospecting stage for water/wastewater related systems and projects.
2. Liaising and communicating with agents/distributors/OEM partners/end-user customers on technical details and specifications of parts and components where EICA works are concerned.
3. Design and producing electrical, control panel drawings (AutoCAD or Eplan), BOM list generation and hardware component selection.
4. Developing PLC programming & HMI project (Siemens /Allen Bradley etc) for all process and functional controls of water/wastewater related systems and instrument.
5. Liaising, negotiating, and managing sub-suppliers/sub-contractors in Singapore and in the region with respect to procurements of all wiring and cabling works, fabrication and assembly of control panels for systems as well as for in-situ installation of water/wastewater related systems or projects.
6. Determining and monitoring procurement and production progress and schedules where cabling and wiring works, control panels’ PLC works and supplies are concerned.
7. On site electrical installation supervision, electrical panel testing, instrumentation configuration, loop test and automation commissioning works.
8. Compiling and handing over operation and maintenance (O&M) manuals (electrical and PLC portions etc) to our agents/distributors and end-user customers.

Requirements:

• Diploma / Degree in Electrical Engineering or Computer Science.
• Good Interpersonal relationship and communication skills with proficiency in spoken and written English.
• Minimum 5 to 8 years of working experience in Water Industry or engineering projects would be advantageous.
• Knowledge of PLC programming (Siemens /Allen Bradley etc)
• Willingness to travel locally or to regional countries occasionally for site installation, trouble-shooting or testing and commissioning duties at clients' project sites
• Able to work independently and a good team player.
• Senior position will be considered for candidates with more experience.
• Candidate who are able to start work within short notice or immediately would be advantageous.

Job Descriptions

1. Manage the day-to-day sales activities for the semiconductor manufacturing equipment products (e.g. CMP tool) within the designated sales territory so as to achieve the sales target set by management.
2. Monitor, regulate and direct the activities of the sales representatives to maximize the market opportunities.
3. To make forecasts / targets regularly and to monitor performance of the sales team in relation to these forecasts. Manager is expected to make directions for the team to achieve these sales targets
4. To drive new marketing promotion efforts and to work with EC on the implementing the marketing and promotions efforts for the semiconductor manufacturing equipment products (e.g. CMP tool)
5. To make, develop and manage the localized marketing and sales program for the sales territory.
6. To communicate with the sales team to understand customer demands and offer sales support where necessary.
7. To work with EC to set the industry pricing level.
8. To manage the SAP ERP system for monitoring the progress of quotations, purchase orders, delivery and invoicing of customers.
9. To work closely with EC on the new accounts and new products, using the local team to win new contracts.
10. Establish customer rapport an acceptance
11. Any other duties as assigned by the management

Job Requirements

1. Knowledge of commercial and shipping documents (Incoterms)
2. Knowledge of the semiconductor manufacturing equipment products(e.g. CMP Tools).
3. Diploma/Degree in Engineering or equivalent
4. Good people skills with a pleasant personality.
5. Strong communication, interpersonal and customer service skills.
6. Excellent presentation and negotiation skills.
7. Ability to work independently as well as collaboratively within the team.
8. Must be prepared to travel overseas for training and to our customers’ location in the region as required.

Preferably to have Sales work experience in Japanese company in semiconductor industry for more than 5 years.

(Those without the relevant experience may be appointed as Senior Sales Engineer initially with a view to be upgraded later)

(Those with more years of relevant experience may be appointed to a relevant management position)

Benefits

• 10days AL
• AWS
• VB depending of the team and company performance
• Transport allowance

Working Hours

• 5 days (9am to 6pm)
• Monday to Friday

Job Description:

• Responsible for implementing all QA/QC inspection and testing, as required by specifications or by regulatory requirements and shall be familiar with all aspects of testing required for commercial building including the quality testing requirements of local Authorities such as the Standards, Productivity and Innovation Board (SPRING Singapore)
• Monitor progress and quality of all C&S, Archi, M&E and security system works, including CONQUAS, Green Mark etc to ensure compliance to project and statutory requirements
• Review procedures to improve productivity.
• Attends meetings with client, authorities, subcontractors and consultants.
• Ad-hoc duties as assigned

Requirements (Qualification & Experience):

• Preferably university graduate in Electrical/Security/Computer Engineering or IT recognised by PEB Singapore.
• Ten (10) years of relevant experience in the implementation and management of quality control systems
• Familiar with BIM for construction, Green Mark, CONQUAS and relevant authority requirements
• Full time stationed on site during construction

We are seeking an experienced and forward-thinking Investment Project Engineer to join our team and be stationed in Singapore. This pivotal role will focus on supporting and driving investment projects to ensure stable and sustainable investment for future growth.

The ideal candidate will play a crucial role in establishing a consistent organization dedicated to long-term investment stability, collaborating closely with both the Japan Mazak staff and the YMS investment team.

Key Responsibilities:

· Lead and support investment projects, ensuring they align with the company's strategic objectives.

· Collaborate with Japan Mazak and cross-functional teams to support YMS investment initiatives, technical requirement and ensure seamless project execution.

· Establish and maintain a consistent organizational framework to ensure future stable investment.

· Conduct thorough reviews of current manufacturing processes and identify areas for enhancement.

· Develop and manage project budgets, timelines, adherence to design specifications and resource allocations.

· Foster strong relationships with internal and external stakeholders to facilitate successful project outcomes.

· Conduct risk assessments and develop mitigation strategies to ensure project success.

· Serve as a key point of contact and resource for manufacturing investment-related inquiries and initiatives.

· Prepare detailed reports and presentations for senior management, highlighting project progress, challenges, and opportunities.

· Stay abreast of industry trends and technological advancements in machine tool manufacturing that could impact investment strategies.

Job Requirements

Education:

· Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Project Management, or a related field.

Experience:

· A minimum of 5-7 years of experience in managing and supporting large-scale investment projects, with a specific focus on equipment manufacturing.

· Proven track record of successfully leading investment initiatives within the equipment manufacturing industry.

· Extensive experience working within Japanese business culture and practices, ideally in a multinational corporation.

Technical Skills:

· In-depth knowledge of equipment tool manufacturing processes, technologies, and industry standards.

· Proficiency in Microsoft Application and possess strong knowledge and mastery of 2D CAD, SolidWorks software, etc

· Strong financial acumen with experience in budgeting, forecasting, and financial analysis related to investment projects.

· Excellent understanding of risk management principles and the ability to develop and implement effective risk mitigation strategies.

Soft Skills:

· Exceptional leadership and organizational skills with the ability to manage and mentor project teams.

· Strong communication and interpersonal skills, with the ability to effectively collaborate with cross-functional teams, stakeholders, and senior management.

· Bilingual proficiency in Japanese and English, with excellent written and verbal communication skills in both languages.

· Strategic thinking and problem-solving abilities to anticipate challenges and devise effective solutions.

Professional Attributes:

· Demonstrated ability to establish and maintain consistent organizational frameworks to support stable future investments.

· Commitment to continuous improvement and innovation in investment project management practices.

· High level of integrity and professionalism in all aspects of work.

Industry-Specific Experience:

· Extensive knowledge of the equipment manufacturing industry, including current trends, challenges, and opportunities.

· Experience in evaluating and integrating new technologies and processes in the equipment manufacturing sector.

· Familiarity with regulatory requirements and standards specific to equipment manufacturing.

Cultural and Business Acumen:

· Deep understanding of Japanese business etiquette, culture, and communication styles.

· Experience in navigating and bridging cultural differences in a global business environment.

· Ability to build and maintain strong relationships with Japanese and local stakeholders.

Job Description:

• Building & Demolition projects

• Restoration and Refurbishment Works

• Additions and Alteration Works

• Driving IDD implementation for the works

Job Requirements:

• Degree in Architecture, Civil & Structural Engineering, Mechanical & Electrical Engineering, Building Science or Quantity Surveying from a University recognized by the respective Professional Bodies or Professional Institutions.

• Minimum 5 years of practical experience in the design and/or construction management of construction projects with contract value of $5 million and above.

Job Description:

• Infrastructure works like roads, drains, sewer works and ancillary works;

• Rectification of infrastructure works such as roads, drains, sewers and ancillary works for handing over to authorities;

• Provision of amenities such as footpaths/pavements, Personal Mobility Device (PMD) tracks, cycling paths, sheltered linkways, decking, etc;

• Construction of surface parking for cars, buses, heavy vehicles;

• Road traffic and junction improvements such as installation of road signage, lane markings;

• Construction of bus stops, bus bays, pedestrian overhead bridges and associated works;

• Earthworks and disposal of debris, removal of stockpiles and other unusable material;

• Slope protection and rectification, Trial trench works;

• Minor land clearances and clearing of overgrown vegetation;

• Instrumentation & Monitoring

Job Requirements:

• Degree in Civil & Structural Engineering from a University recognized by the Professional Engineers Board (PEB) and/or accreditation recognized by the Professional Engineers Board.

• At least 5 years of practical experience in the management of building (e.g. new building, R&R and A&A projects) or infrastructure (e.g. road, drain, sewers, services diversion) projects with contract value of $5 million and above.

• The PM must be familiar with PSSCOC.

• At least 2 years of relevant working experience or involvement in Integrated Digital Delivery (IDD) for project delivery and built environment industry.

• Strong, mature and proven ability to organize, manage and motivate a project team.

Job Description:

• Infrastructure works like roads, drains, sewer works and ancillary works;

• Rectification of infrastructure works such as roads, drains, sewers and ancillary works for handing over to authorities;

• Provision of amenities such as footpaths/pavements, Personal Mobility Device (PMD) tracks, cycling paths, sheltered linkways, decking, etc;

• Construction of surface parking for cars, buses, heavy vehicles;

• Road traffic and junction improvements such as installation of road signage, lane markings;

• Construction of bus stops, bus bays, pedestrian overhead bridges and associated works;

• Earthworks and disposal of debris, removal of stockpiles and other unusable material;

• Slope protection and rectification, Trial trench works;

• Minor land clearances and clearing of overgrown vegetation;

• Instrumentation & Monitoring

Job Requirements:

• Degree in Civil & Structural Engineering from a University recognized by the Professional Engineers Board (PEB) and/or accreditation recognized by the Professional Engineers Board.

• At least 5 years of practical experience in the management of building (e.g. new building, R&R and A&A projects) or infrastructure (e.g. road, drain, sewers, services diversion) projects with contract value of $5 million and above.

• The PM must be familiar with PSSCOC.

• At least 2 years of relevant working experience or involvement in Integrated Digital Delivery (IDD) for project delivery and built environment industry.

• Strong, mature and proven ability to organize, manage and motivate a project team.

The Mercedes-Benz AG Group CISO heads Mercedes-Benz’s Global Cyber Security Department (based in Stuttgart, Germany). We are looking for a Cyber Security SIEM Use-Case Engineer to join our Cyber Intelligence and Response Centre (CIRC). This role is crucial for the engineering, development, and continuous improvement of threat detection use-cases within our SIEM . You will also be involved in the engineering and development of custom rules to detect potential threats swiftly and creating transparency to map existing detection capabilities to the MITRE ATT&CK framework.

Key Responsibilities:

• Proactively create, test, and tune new detection use-cases in the SIEM
• Review and enhance existing detection use-cases using Machine Learning or User & Entity Behaviour Analytics (UEBA).
• Map detection use-cases to the MITRE ATT&CK framework to assess SIEM monitoring coverage.
• Perform regularly updates to threat detection engineering playbooks, processes, and documentation.
• Collaborate closely with the SOC to challenge and improve detection and prevention capabilities.
• Identify and implement SIEM use-cases to address blind spots.
• Coordinate with the log onboarding team and SIEM architect to validate new log sources for compliance and improve SIEM backend performance.
• Collaboration with Service Operations team to address challenges, process fulfillment, documentations, and improvement of Service Operations Quality.
• Provide governance on topic which related to operational stability.

Join us to play a pivotal role in enhancing our cyber security measures and protecting our global operations.

QUALIFICATIONS

Specific Knowledge

• Intense knowledge in using Splunk Enterprise Security (ES)
• Intense knowledge in developing and tuning detection use-cases (Correlation Searches) in Splunk based on Data Models
• Experience in Machine Learning and Risk Based Monitoring in Splunk is an advantage
• Ability to analyse and interpret security logs and events to identify potential threats and attack patterns
• Experience in validating data source compliant using the common interface model (CIM)
• Experience of setting up and utilize data models in Splunk
• Deep understanding of cyber security concepts to create detection use-cases targeting various phases of attack lifecycle
• Understanding of MITRE ATT&CK framework and detections of various tactics and techniques
• Experience and capable of creating interactive dashboards, alerts, reports in Splunk

Experience

• Degree from a reputable university or significant course work in Computer Science, Networking, engineering or other computer-related fields of study.
• At least 3 years of experience with demonstrable skillsets in SIEM use-case engineering, with over 5 years of experience
  in cybersecurity
• Previous relevant experience working in a security operational role, ideally within a Corporate, Military, or Police environment; engaging with and responding to a diverse array of internal stakeholders, including senior management
• Have good emotional intelligence and is a proven team player
• Rational and calm under pressure
• Fluency in the English language
• Effective oral and written communication skills
• Good timekeeping ability to cope with a tight deadline and achieve operational objectives
• Self-motivated with the ability to carry out assigned tasks with minimum supervision

This position is based in location Singapore. A valid and approved work visa is required for employment in Singapore in accordance to local labour law regulations. We regret to inform you that only shortlisted candidates will be notified.

Responsibilities:

• Report to the Chief Resident Engineer (CRE) and assist with coordination and interfacing matters with the Contractors of the IWMF and also TWRP.

• With a focus on inter-disciplinary construction management, assist the CRE to coordinate the existing team of discipline Lead Resident Engineers as required, including liaison with our in-house Engineering Design Manager (EDM) on any outstanding design issues that may affect immediate construction activities.

• Lead and coordinate the construction work interface between IWMF contractors and TWRP contractors works and tie-ins etc and in particular with counterpart Interface Manager from TWRP.

• Lead and set up interface meetings between the various Contractors to drive the Contractors to resolve their coordination and tie-in point issues.

• Coordinate with BIM Manager and set up interface BIM walk through sessions as required with the Contractors.

• Project delivery planning updates for the interfacing/tie-in points from the IWMF/TWRP Contractors with a specific focus on MEICA issues given the stage of the project.

• Coordinate and expedite internally on urgent RFA/RFI submissions with regards to interfacing matters, in particular between EPC1 and EPC2 but also with IWMF and TWRP.

• Attend other site meetings as required by CRE and coordinate internally to resolve technical issues with the Contractors with regards to interfacing matters with a specific focus on MEICA issues given the stage of the project.

• Attend and follow-up on interface/coordination matters arising from Weekly Progress Meetings, MEICA Erection Meetings, Contractors Interface Meetings, BIM Review Meetings, interface meetings with TWRP, etc and as required for the coordinated completion of the Works under each contract as they lead into the Testing and Commissioning phase of the project.

Requirements:

• A relevant Mechanical Engineering Degree recognized by the Professional Engineers Board (PEB) or registration with the Joint Accreditation Committee of the Institution of Engineers Singapore (IES) / Association of Consulting Engineers Singapore (ACES).

• At least 10 years of relevant experience in design coordination, MEICA interface management, and construction of large infrastructure and/or industrial projects, waste to energy plants, power plant projects, or waste/water management projects in Singapore is preferred but overseas/international experience will also be considered as relevant for a multidisciplinary experienced candidate.

Job Description:

• Drive PGCS Quality programs and policies compliance across site, by partnership with functional stakeholders.
• Key contributor/promoter to the advancement of Quality function across the sites; creating and driving critical/key business objectives in line with supporting/partnering with Operations, Supply Chain functions etc.
• Lead incident management and resolution and champion customer quality across Singapore. Site lead for Quality and Food safety crisis mgmt.
• Lead the implementation of the Singapore Quality Strategy including communication, project management and roll out activities.
• Lead continuous improvement culture/productivity initiatives to support site BPI process, demonstrating best practices to implement all quality improvements
• Drive, support and champion KPIs, key Quality metrics, etc.
• Act as a business partner to other functions whilst championing Quality, to ensure an extended and consistent quality focus.
• Be a key member of the Site Leadership team and value add in driving functional and site agenda.
• Support and provide strategic guidance around NPIs, validation, Total Quality System, Compliance, Capital investment, etc.
• Partnership with other functions ensuring change control risk assessment and validation in place for Network capacity projects and other key projects and significant changes.
• Financial Management; Budgetary and AOP responsibilities/input.
• Compliance; drive partnership with other functions through the Quality team to achieve key business goals for the control environment. Compliance with all regulations and 3rd party auditing requirements.
• Provide strategic quality leadership to the extended Quality Team
• Organisation design & sustainability of a highly effective team with appropriate succession plan. Encourage, manage & promote people-related activities/processes, partnering with HR
• Develop capability, personal growth and career development for direct reports, support these activities with DRs’ associated teams.
• Play in instrumental role in developing the overall team capability, supporting and aligning with overall plant culture.
• Ensure the smooth transition of new products to the Singapore facilities.
• Manage the complexity of additional materials, packaging and concentrate components from a quality perspective as portfolio expands
• Support and implement PGCSSC global quality initiatives
• Systems improvements (including IT systems) in terms of Processing, GMP, Product Safety, Disposition and Traceability.
• A requirement of the role is that you must adhere to all PepsiCo Health & Safety requirements.

Qualifications :

• Bachelor’s Degree in Science, Food Technology, Chemistry or any other related discipline
• Minimum 7 years of relevant experience as a supervisor in operating Laboratory environment, manufacturing concern/MNC
• Ability to manage senior stakeholders and leadership team members
• Experience in People Management and prior supervisory skill
• Possess knowledge of and experience in GLP, HPLC / GC operation, SAP QM module and LIMS management
• Strong leadership presence, ability to manage and co-ordinate with cross-functional teams on investigation analysis, troubleshooting and issues resolution
• Knowledge of food safety quality standards such as HACCP and FSSC 22000
• Ability to lead change and drive behaviours
• Ability to organize and manage multiple priorities in high-pressure work environment
• Strong collaboration and influencing skills
• Excellent communication and interpersonal skills, both verbal and written with ability to clearly articulate ideas and proposals to all levels of the organization
• Positive and Can-do Attitude
• Willing to stretch and take additional responsibilities when needed
• Lead by example to others

Kindly note that this is a short-term role based in Singapore.