As a Process Development Engineer, you will be primarily responsible for starting up, developing and optimizing processes to improve product quality and reliability, working on process yield improvement, cost reduction, productivity improvement and risk management as well as resolving manufacturing line problems. You will also be required to identify, diagnose and resolve assembly process related problems by applying failure analysis, FMEA, 8D or SPC/FDC methodology. Additional responsibilities include coordinating and carrying out process, equipment and material evaluation/optimization to implement changes at process step, leading and participating in yield improvement and cost reduction activities, handling new process baseline qualifications and managing, auditing and liaising with material suppliers to achieve quality, cost and risk management objectives.

• Excellent execution on assembly process for 1st New Product Introduction (NPI) success and smooth transfer process from NPI to HVM
• Excellent execution of the qualification of NPI products / packages build that proliferate from the pilot products and packages according to planned timeline
• Full responsible on support NPI business process with process TRA, POS, PFMEA/QCP, risk mitigation and documentations.
• Deliver BIC yield and cost on product NPI with integration of DFx BIC package solution, process guideline and design rules.
• Collaboration with cross functional team from NPI to LVM/HVM process transfer.
• On-time execution of NPI Customer samples and Engineering Samples build for new products and packages

SME Process Owner Responsible for Continuous Improvement on Process Yield, Defect Elimination and Process Characterization

• Process owner to perform on-time detection with data analysis for process yield improvement. Lead the defect elimination and continue improvement action, with problem solving methodology, statistical analysis and integration solution decision.
• Process owner to develop process recipe for BIC UPH, conducting process characterization to define process parameters and boundary.
• Continuous develop in depth assembly process technical knowledge, well understand process capability/tolerance//spec limit/CpK, and utilize key tools PFMEA/QCP/APC/FDC/Alarm on assembly processes Cz/Development/NPI.
• Global leader for cross team collaboration on network BKM, process recipe spec and recipe standardization/conversion.

Technology enablement and development – Process, Material, Equipment

• Participate and support Product Roadmap, to enable key process capability and technology development to ensure packaging solution is ready prior 1st Qual Silicon deliver.
• Frequent engagement with equipment and material supplier (at least interval of monthly or daily/weekly for process issues)
• Collaboration with Supplier and involvement Supplier Roadmap (Material/Equipment/OSAT), to understand market trends and competitor’s direction, ensure key process technology and capability enablement is in-line.
• Frequent review and participant Competitor Analysis, to understand market trends and competitor’s technology/capability boundary
• Engage and follow PDE business process (TGR, TORB, KEG interlock) for new technology qualification, alignment and safe launch

Teamwork and General expectation

• Trainer/Buddy/Mentor for new team members, build effective relationships within team and cross team (peers, counterpart)
• Regularly review data and direction with supervisor. Demonstrate sound data analysis and judgment. Present reports and findings with appropriate conclusions, recommendations and decision making.
• Develop, or coordinate development of, training materials for existing/new process
• Safety Identify and promptly report hazards, follow safety procedures and area work rules including proper PPE, lockout and chemical safety.

Requirements:-

• Masters or Bachelor's degree in Mechanical/ Materials Engineering
• Experience in backend engineering process or package development preferred
• Good technical knowledge in component test and/or module manufacturing process
• Excellent data analysis, statistical analysis, data interpretation skills
• Ability to make sound data-driven decisions. Prioritize and apply due-diligence in day to day task.
• Possess analytical and problem solving skills
• Keen interest in semiconductor engineering
• Showcase leadership experience and potential

Job Description

Reporting to the Project Manager/Engineering Manager, successful applicants will be involved in Power supply system and switching mode power supply development activities such as electrical circuit design, magnetic design, prototyping, evaluation and assisting manufacturing in BETA run of the new product.

Key Skills & Responsibilities

• Understand customer requirement to design or modify XP product to provide Added Value (AV) Solution based on XP design criteria and procedure
• Maintain an in-depth knowledge of all XP products to identify and select the most suitable product for Engineering Solution design.
• Design new products in timely manner to meet the product spec, modify existing designs, improve existing products for better performance and /or cost
• Proposed AV or modified solution based on sales/customer requirements.
• Perform product verification & validation test such as electrical performance, thermal, EMC and DVT to ensure product meet specification before delivered to customer.
• Electrical circuit and schematic design
• Embedded systems design both in hardware
• Firmware design knowledge will be an added advantage.
• Bill of materials (BOM) creation and documentation.
• Breadboard and prototype samples making and debugging
• Design new solution/product within XP standard design practice, safety guidelines, agreed timescales and costs.
• Performed product (AV and modified model) verification and validation, such as electrical performance, thermal, EMC and DVT evaluations,
• There will be some travelling required in conjunction with customer and manufacturing support as well as outside training

Qualifications

Knowledge/Qualifications/Attributes

• Minimum bachelor’s degree in electrical/electronic or higher degree in a related engineering field.
• More than 3 years electrical design experience of power supply/power system; those with more than 5 years’ experience will be considered for senior position.
• For Senior position, Identifies, and review projects main task, schedules, and technical challenges on project delivery timely is required.
• Good project management skill and capable of leading long-term structured problem-solving projects for senior position.
• Familiarity with PCB design using Altium/PADS will be an added advantage.
• Requires good communication, reasoning, problem solving and analytical skills.
• Hardworking, dynamic, strong responsibility and a good team play

Roles & Responsibilities

M&E Engineer is responsible for :-

JOB DESCRIPTION:

· Monitor and report on the progress of work to project manager;

· Control the progress of shop drawings, technical submissions and equipment/material procurement/fabrication/delivery status for on-time completion.

· Coordinate with client’s representatives, consultants, and subcontractors on all technical matters, including submission of method statement, drawings, materials, samples and work progress;

· Control site progress & installation quality as per approved;

· Carry out inspection of M&E works prior to concreting or subsequent construction works;

· Assist in supervising and coordinating work closely with other departments;

· Assist for submission of evaluation of progress claim, variation work to M&E Manager

· Participate in all relevant project meetings;

· Responsible for carrying out M&E technical meetings and resolving technical issues with record;

· Responsible for M&E drawing coordination and production of CSD and individual service drawings quality;

· Responsible for conducting inspection to meet with construction schedule;

· Provide and maintain all site inspection records & T&C records up to date;

· Ensure quality of MEP workmanship and compliance with safety and environmental requirements;

· Provide and maintain all site inspection records & T&C records up to date;

· Allocate work and ensure jobs are correctly and properly achieved within standards and SOP.

REQUIREMENTS:

· Diploma / Degree in Mechanical or Electrical Engineering;

· Min of 2 years’ work experience related projects in Singapore building and construction industry;

· Strong Electrical/Mechanical knowledge with hands-on experiences;

· Sound knowledge in BIM, Revit, Autocad would be an advantage;

· Good communication skills with the ability to coordinate with site teams to execute work

Job Responsibilities:-

• Define, architect and document the Design-for-Testability (DFT) concept for SOC’s
• Develop, implement and verify DFT measures
• Work closely with cross-function teams (design/verification, physical, and operation) to ensure all test requirements are met and DFT function is correctly implemented for effective DFT solutions
• Achieve target structural test coverage for logic, memories, serdeses and other mixed signal IPs
• Test pattern generation/verification/post-silicon ATE support

Job Requirements:-

• Master's or Bachelor Degree in Electronics and Communications Engineering or equivalent
• Minimum 10 years of working experience in DFT field
• Good knowledge in Boundary Scan, ATPG Scan, Synopsys SMS and/or MBIST is a must
• Working experience in industry standard tools like Test Kompress, DFT advisor, DFT Compiler, Mentor’s SSN and OCC controller are desirable
• Knowledge of full VLSI RTL2GDSII design flow
• Knowledge in high level programming and script writing
• Knowledge in HDL, synthesis, static timing analysis and constraining will be an added advantage
• Some Experience in Test development and Product engineering

Location: Next to Bendemeer MRT

Interested candidates may submit detailed CV with the following info:-

• Current salary, including AWS or Variable Bonus
• Expected salary
• Availability

Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing or Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 1.5 End User Computing support and well verse in Windows OS.
• Change Management, including review new and implemented changes, chair CAB, review change schedule, maintain dashboard, prepare comms.
• Incident Management, including analysing trends, incident workarounds, monitoring aged incidents.
• Major Incident Management, including communication, being part of the Incident Repsonse Team, managing suppliers
• Problem Management, including chairing any problem meetings, managing active problems, highlighting new problems.
• Release Management – liaising with the testers, vendor, tracking features and defects
• Service Request Management – documenting processes, analysing trends, identifying service improvements, working with teams to design new processes
• Continual Service Improvement – being able to highlight areas of improvement for effectiveness and efficiency
• Service Reporting
• ServiceNow – to assist with the day-to-day management of the tool, including working on incidents and requests

Technical Skills & Qualifications Required:

• Good knowledge of ITIL
• Good knowledge of ServiceNow
• Good knowledge/experience of using the Microsoft suite, specifically including SharePoint , Visio and Excel
• Exposure to/familiarity with automation

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• At least 3-5 years of relevant working experiences.
• A good team player.
• Excellent interpersonal skills.
• Excellent verbal and written communication skills, and ability to communicate with different audiences and write a range of document types – procedures, comms, training modules.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Sound problem solving and investigative skills.
• Desire to follow best practice and development standards as agreed within IT.
• Keen to learn new skills.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

Job Description

• Carry out routine maintenance and repair work (Machine and Facilities)
• Perform plumbing, painting, and minor repairs
• Provide technical support and training to staff
• Implement preventive maintenance schedules
• Ensure compliance with health and safety regulations

Job Requirements

• Electrical/Mechanical engineering knowledge is an advantage
• Machinery repair and maintenance is an advantage
• Able to work as a team and individually
• Must be willing to be hands on
• Able to do overtime and work on Saturday and Sunday if required

Responsibilities:

- Assess Die Overkilling In Line and Optimization of criteria

• Define Sampling Criteria for Yield Enhancement (YE) Wafer – Initial is to align with RPM lot
• Define and Create YE In Line DL2 & MRDA Flow: Full scan with tighter criteria (higher magnification) with non-die-kill
• Create Deviation flow to Route to YE Flow
• Define and Create YE Probe Flow: Full data logging and Test-to-end to capture as much data as possible
• Data Analysis:
• Correlation of MRDA (Metro Real-time defect analysis) Defect to Probe to identify in line failure mode causing probe fail and failure analysis

- Manage Risk of deviation

- Provide organizational leadership to build functional strategies & processes, and collaborate with partners to deliver strategic solutions

• Establish organizational roadmaps and strategies. Apply extensive knowledge and tenacity to carry out strategies.
• Collaborate with peers to construct global solutions.
• Ensure conflict resolution and assist with identifying escalation paths.
• Align internal strategies and communicate line of sight to corporate strategic objectives.
• Establish and communicate department capabilities to ensure partner expectations are aligned.
• Manage conflict and build effective relationships with internal and external partners.
• Initiate and sustain effective communication with internal and external partners.
• Provide advice to senior and executive management on strategic decisions
• Establishes and manages budget/finances for the team

- Ensure a Safe, Compliant, and Ethical Work Environment

• Maintain knowledge of and apply company safety, labor, and ethics policies.
• Communicate requirements and expectations to leaders and external partners.
• Ensure execution of mandatory training for organization.
• Identify and resolve and / or report potential safety, security, and labor issues.

Requirements

• Bachelors, Masters or PhD in Electrical Engineering, Materials Science, Chemical Engineering, or related field
• At least 4 years of experience in Semiconductor Manufacturing and on a leadership capacity, with focus on Advance Packaging technologies and High Bandwidth Memory (HBM) integration, in yield enhancement
• Experience in PWF (Post Wafer Fabrication), Backend engineering process, assembly package technology development and technical knowledge with die and wafer level process technology with understanding of Micron’s silicon and how it interacts at a package level through CPI (Chip Package Interaction), in yield enhancement
• Strong leadership and vision and must be able to comfortably work across organizational boundaries and geographies.
• Demonstrated ability to influence executives, senior leaders and partners on strategic decisions across multiple functions and geographies.
• Ability to effectively collaborate with multi-functional organizations to understand needs and translate them into actionable plans, deliverables, and resource requirements.
• Demonstrated ability to drive and implement a wide range of global initiatives with global teams.
• Ability to be guided by business objectives and determine best methods for delivering results.
• Organized, meticulous, and strong focus on results.
• Demonstrated ability to inspire teamwork and to effectively lead others.
• Proven facilitation skills including the ability to influence others, build consensus, and resolve conflict.
• Demonstrated track record in baseline performance improvement, business process creation, process simulation techniques, data interpretation skills and proficiency in statistical analysis/method.
• Excellent analytical skills and organizational competency
• With good oral and written English communication skill

Keen on the role? Apply now!

As a Package Design Engineer within the Package Development and Engineering (PDE) organization in Micron Technology, you will provide package definition and designs for advanced semiconductor devices. You will be working with a multi-functional team across several geographies to create package design databases such as package stack-up, simulation, route-study, substrate/lead frame layout, wire bond diagrams, and other design documentation. You will be ensure the completion of design activities within the project schedule and ensure that design outputs are within Assembly and vendor capability.

Responsibilities will include, but are not limited to:

• Conduct feasibility studies for various package options and assess designs for manufacturability and reliability.
• Work closely with multi-functional team to address packaging design challenge in the area of layout, electrical, thermal, mechanical, assembly and reliability.
• Interact with PDE assembly team and external assembly subcontractor partners to recommend package solutions to meet customer and/or market requirements
• Generate and update assembly documents in database. Provide drafting and drawing support for package drawings, interposer drawings, and manufacturing drawings.
• Support package and DFMEA reviews with assembly engineering and subcon teams.
• Support package technology development, including material selection, process development, DOEs, and related activities
• Support package technology development, including material selection, process development, DOEs (Design of Experiments), and related activities.
• Track and drive program milestones to ensure timely development execution.
• Provide design support for thermal/mechanical/electrical simulation analysis.
• Support and contribute to the Global Design, Simulation and Substrate (GDSS) team on continuous improvement efforts such as:Global design alignment activities
  Continuous improvement efforts
  Package design rules
  Package roadmaps
  Competitive Analysis review

Requirements:

• Master (preferred) or Bachelor of Science degree in Electrical Engineering or Mechanical Engineering with a minimum of 5 years of experience in semiconductor packaging industry OR PhD graduates in Electrical Engineering
• Candidates must possess a strong design knowledge of high-density (Wirebond + Flip-Chip) packaging architectures, die stack-up, packaging layout optimization.
• Excellent communication skills, both oral and written in English.
• Excellent problem solving and analytic skills.
• Experience with Cadence SIP, APD and AutoCAD software tools is preferred.
• Good understanding of Silicon IP, floorplan and Signal/Power Integrity is a plus.
• Ability to work independently, prioritize and manage numerous projects with minimum supervision.
• A global perspective and the ability to work in a multicultural environment.

Performs semiconductor design engineering assignments including engineering and designing packaging stack-up, layout checking, documenting specifications, modifying and evaluating packaging risk in the areas of electrical, thermal, mechanical and reliability. Reviews package design requirements, define the package stack-up and conduct final design review. Typically responsible for projects, or portions of projects, to design, fabricate, modify, and evaluate semiconductor Packaging.

Your main responsibilities include:

• Develop and maintain product datasheet testing and characterization test programs for NAND and NOR components
• Working with product reliability engineers to define test flows for individual products
• Provide support to operation team to ensure seamless execution for generated test flow on the tester with live product
• Perform electrical failure analysis for failure validation and characterization

You are encouraged to apply if you can demonstrate some of the qualities listed below:

• Master's or Bachelor's degree in Engineering field. Microelectronic/Electrical/Computer Engineering fields are preferred.
• Positive attitude and self-motivation towards learning and development.
• Good analytical mindset and structured personality.
• Good written and verbal communication skills.
• Hands on experience with C++/Python and Object-Oriented Programming is a plus
• Understanding Automated Test Equipment and flash memory is a plus.
• Fresh graduates are welcome to apply.

Working location:

• 990 Bendemeer Road, Singapore 339942

Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing or Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 1.5 End User Computing support and well verse in Windows OS
• Diagnosing end-user system failures and implement repair solutions.
• Diagnosing printer and other peripheral devise failures and implement repair solutions.
• Troubleshooting network devices in order to ensure connectivity from the PC to the Network.
• Providing installation and upgrading services of hardware and software.
• Configuration and troubleshooting of phones and other mobile devices, tablets, and PDAs.
• Setup and troubleshooting audio/video equipment such as projectors and video conference equipment

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• At least 1-1.5 years of relevant working experiences.
• Knowledge of multiple manufacturers and operating systems.
• Excellent troubleshooting capability.
• Using established procedures and working under immediate supervision, performs assigned tasks.
• Work is routine and instructions are usually detailed.
• Resolves routine questions and problems and refers more complex issues to higher levels.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

Job Responsibilities:

• Assist Project Manager in all on-site technical/ engineering matters and authority submissions.
• Prepare submission of shop drawing / Materials / MOS/ Monthly Progress Claims and PM Reports.
• Lead in Site Coordination and execution relating to the construction project.
• Planning of micro scheduling with other trades/disciplines against Master program
• To update structural/architectural/M&E progress with scheduling tools.
• Supervise and monitor projects are carried out in accordance with the company’s operating procedures, quality standards & contractual specifications.
• Ensuring supervisors & foremen meet clients’ regulatory work requirements.
• To check and ensure compliance with TOP checklist
• Responsible for all inspection activities being carried out.
• Ensuring environmental, safety, and health practices are carried out at all times.

Requirements:

• Degree in Civil or Structural Engineering recognized by PE Board/ BCA
• 4-5 years experience in Building Engineering projects
• Experience with Precast/PPVC/MET projects will be a plus
• Proficient in MS Office, AutoCAD, and BIM
• Organized, meticulous with positive work attitude
• Able to work independently and a team player
• Good analytical, supervision, and communication skills
• Completed QM project and a registered Core-trade Foremen/ Supervisor would be an added advantage

• Responsible for direct sale of vacuum pumps, systems, parts and services in Singapore. Be accountable for individual sales target to be determined by the Company.

• Break new grounds and penetrate the key industries as in; Food Packaging, Medical, Petrochemical, Chemical, Automotive, Pharmaceutical, Electronics, Semiconductor etc.

• Undertake the role to develop new and key accounts and strive towards achieving sales goals and objectives.

• Engage the customers on a day-to-day basis to initiate and coordinate sales activities.

• Responsible for quarterly Sales forecasting and meeting monthly and yearly “Sales” target for Singapore region.

• Track and report sales activities; submit weekly and monthly report promptly.

• Handle sales inquiries and generate proposal to customers for sale of pumps, repair, field service and spare parts.

• Be competent to undertake hands-on related issues arising from aftersales including onsite trouble-shooting.

• Create sales leads, follow up on sales opportunities and take ownership to follow up on quotations.

• Contract review prior to order entry – Evaluate and interpret customers’ specification against our offer. Clarify with customer where necessary to resolve unclear requirements. Be responsible to coordinate with Order Administration team on shipment update and information going back to the customer up to the point of delivery.

• Working closely with customers to find application possibilities and propose suitable technical solutions.

• Conduct competitive analysis and identify market price for various customers and market segments in Singapore.

• Conduct product and application training.

Responsibilities:

- Assess Die Overkilling In Line and Optimization of criteria

• Define Sampling Criteria for Yield Enhancement (YE) Wafer – Initial is to align with RPM lot
• Define and Create YE In Line DL2 & MRDA Flow: Full scan with tighter criteria (higher magnification) with non-die-kill
• Create Deviation flow to Route to YE Flow
• Define and Create YE Probe Flow: Full data logging and Test-to-end to capture as much data as possible
• Data Analysis:
• Correlation of MRDA (Metro Real-time defect analysis) Defect to Probe to identify in line failure mode causing probe fail and failure analysis

- Manage Risk of deviation

- Provide organizational leadership to build functional strategies & processes, and collaborate with partners to deliver strategic solutions

• Establish organizational roadmaps and strategies. Apply extensive knowledge and tenacity to carry out strategies.
• Collaborate with peers to construct global solutions.
• Ensure conflict resolution and assist with identifying escalation paths.
• Align internal strategies and communicate line of sight to corporate strategic objectives.
• Establish and communicate department capabilities to ensure partner expectations are aligned.
• Manage conflict and build effective relationships with internal and external partners.
• Initiate and sustain effective communication with internal and external partners.
• Provide advice to senior and executive management on strategic decisions
• Establishes and manages budget/finances for the team

- Ensure a Safe, Compliant, and Ethical Work Environment

• Maintain knowledge of and apply company safety, labor, and ethics policies.
• Communicate requirements and expectations to leaders and external partners.
• Ensure execution of mandatory training for organization.
• Identify and resolve and / or report potential safety, security, and labor issues.

Requirements

• Bachelors, Masters or PhD in Electrical Engineering, Materials Science, Chemical Engineering, or related field
• At least 4 years of experience in Semiconductor Manufacturing and on a leadership capacity, with focus on Advance Packaging technologies and High Bandwidth Memory (HBM) integration, in yield enhancement
• Experience in PWF (Post Wafer Fabrication), Backend engineering process, assembly package technology development and technical knowledge with die and wafer level process technology with understanding of Micron’s silicon and how it interacts at a package level through CPI (Chip Package Interaction), in yield enhancement
• Strong leadership and vision and must be able to comfortably work across organizational boundaries and geographies.
• Demonstrated ability to influence executives, senior leaders and partners on strategic decisions across multiple functions and geographies.
• Ability to effectively collaborate with multi-functional organizations to understand needs and translate them into actionable plans, deliverables, and resource requirements.
• Demonstrated ability to drive and implement a wide range of global initiatives with global teams.
• Ability to be guided by business objectives and determine best methods for delivering results.
• Organized, meticulous, and strong focus on results.
• Demonstrated ability to inspire teamwork and to effectively lead others.
• Proven facilitation skills including the ability to influence others, build consensus, and resolve conflict.
• Demonstrated track record in baseline performance improvement, business process creation, process simulation techniques, data interpretation skills and proficiency in statistical analysis/method.
• Excellent analytical skills and organizational competency
• With good oral and written English communication skill

Keen on the role? Apply now!

Rapsodo is a Sports Technology company with offices in the USA, Singapore, Turkey & Japan. We develop sports analytics products that are data-driven, portable and easy-to-use to empower athletes at all skill levels to analyse and improve their performance. From Major League Baseball star pitchers to Golf tour players, athletes use Rapsodo technology to up their game across the world. Trusted by coaches and players from youths to professionals, Rapsodo provides real-time insights for all-time performance.
We are innovative, focused, and rapidly growing. We are continuously looking for team players who will stop at nothing to deliver state-of-the-art solutions as part of Team Rapsodo.
As a Full Stack Developer, you will design, develop, and deploy robust, secure, and user-centric applications while leveraging the power of cloud technologies. You will work across the entire tech stack, ensuring our applications are scalable, efficient, and aligned with business goals.

Location:

Singapore

Key Responsibilities:

• Develop Full-Stack Applications: Design, build, and maintain responsive front-end interfaces and secure, scalable back-end services.
• Cloud Integration: Leverage cloud platforms (AWS, Azure, Google Cloud) to develop and deploy cloud-native solutions, ensuring optimal scalability and performance.
• Collaborate Across Teams: Work closely with product managers, designers, and DevOps engineers to deliver seamless user experiences.
• Optimize Performance: Ensure applications perform reliably under high usage, implementing best practices for scalability and security.
• Innovate: Stay ahead of industry trends and bring new ideas to enhance our offerings.

• 8+ years in full-stack development with expertise in front-end frameworks (React, Angular, or Vue.js) and back-end technologies (Node.js, Python, Go, etc.).
• Hands-on experience with cloud platforms such as AWS, Azure, or Google Cloud.
• Strong understanding of CI/CD pipelines and DevOps tools.
• Proficiency in building RESTful APIs and microservices architecture.
• Familiarity with containerization (Docker, Kubernetes) and serverless computing.
• Experience with both SQL and NoSQL databases.
• Excellent problem-solving and analytical abilities.
• Strong communication skills to work effectively with cross-functional teams.
• Self-motivated, team-oriented, and driven to innovate.
• A natural curiosity for new technologies and trends in cloud computing and software development.

We are a global leader in sports vision technology, powered by a team that believes in failing fast, learning faster, and winning as a team. At Rapsodo, you'll thrive in a culture driven by customer focus, achieving more with less, and redefining what's possible. If you are eager to work independently while contributing to a dynamic, innovative, and passionate team, we encourage you to submit your application.

About Us:

We develop comprehensive software products and solutions ranging from IT consultancy to infrastructure and hardware setup to optimise customers' experiences. To establish ourselves as a leading provider of applications and healthcare support services for the Asian market, and partner healthcare customers to build a safe medical environment for all.

We are driven by our group philosophy as defined below:

1. Provide the best to our customers through a service-oriented culture

2. Create new value through innovation

3. Realise greater possibilities through advanced technology

Roles and Responsibilities:

• Responsible for providing technical assistance and support related to computer systems, hardware or software testing
• Responds to queries, runs diagnostic programs, isolates problem, and determines and implements solution
• Provide technical assistance and support for incoming queries and issues related to computer, systems, software, and hardware
• Respond to queries either in person or over the phone
• Write training manuals
• Maintain daily performance of computer systems
• Respond to email messages for customers seeking help
• Ask questions to determine nature of problem
• Walk customer through problem-solving process
• Install, modify, and repair computer hardware and software
• Run diagnostic programs to resolve problems
• Are required to apply information security in accordance with the established policies and procedures of the organization.

Requirements:

• Diploma or Certificate in IT/Computer Engineering with 1-2 years of working experience in technical support
• Experience in basic networking support
• Experience in supporting OS platforms such as Windows 10 and MS Office applications
• Prefer candidates who are resourceful, good working attitude & takes initiative
• Good communication skills and administrative skills

JOB SCOPES & JOB RESPONSIBILITIES

• Overseeing the construction activities and progress, planning, implementation and monitoring work schedules in accordance with the master and detailed work programme.
• Liaise with Professional Engineer on civil related works.
• Liaise with consultants for technical issues and coordinate the site activities with subcontractors.
• Handling of technical and engineering problems.
• Provide guidance to supervisors in relation to construction works, ensure progress according to schedule, quality standards are maintained site inspections are carried out and technical issues are resolved on time.
• Prepare report and method statement whenever necessary.
• Manage and control workers and monitor their work closely to keep site safer and neat.
• Supervise ongoing site activities closely.
• Other ad-hoc assigned by the Company.
• Good attitude and relevant working experience.

JOB REQUIREMENTS

• Recognised Certificate in Civil Engineering.
• Minimum 5 Years experience in the construction site.
• Independent with good communication skills.
• Good organizational and planning skills.
• Effective communication and coordination skills and teamwork.
• Able to work independently and in a team.

Responsibilities:

• Install, configure, troubleshoot and support servers or virtual machines (Hyper-V / VMware) running on Windows Server operating systems.
• Perform system maintenance, upgrade, patches and incident resolution outside of working hours when required.
• Monitoring and implementing backup solutions for critical systems and data regularly.
• Implement and maintain IT security measures and best practices for systems and address security incidents with latest security trends.
• Assist in the planning and implementation of IT projects, ranging from system upgrades to new system deployments.
• Create and update technical documentation pertaining to systems administration for on-premise systems, Azure and Microsoft 365.
• Any related ad-hoc duties as assigned.

Requirement:

• Minimum 3 years of experience as a System Engineer or Server Administrator.
• Experience with Active Directory, Group Policy, Virtualization, Patch Management, Microsoft Entra and Microsoft 365.
• Experience in cloud platforms such as Azure and AWS.
• Possess excellent communication, problem-solving and analytical skills.
• Ability to work independently.

Job Summary:

The Applications Support Engineer provides technical support and maintenance for software applications, ensuring their optimal performance and availability. This role involves troubleshooting issues, implementing solutions, and collaborating with other IT teams to enhance system functionality. The Applications Support Engineer is also responsible for documenting processes, managing application configurations, and assisting in the deployment of software updates and patches.

Key Responsibilities:

• Application Support: diagnose and troubleshoot application issues reported by end-users or detected through monitoring tools. Provide timely and effective resolution to application problems, escalating issues when necessary.
  
• Incident and Problem Management: manage and resolve application-related incidents and problems, ensuring root causes are identified and addressed. Maintain an incident log and provide regular updates to stakeholders on the status of issues.
  
• Application Maintenance and Updates: work with development teams to deploy new versions and patches of applications and implement changes. Test and validate updates before deployment to ensure minimal disruption to users.
  
• User Support and Training: assist end-users with application-related queries and provide technical support. Conduct training sessions for users on new features or changes to applications. Develop user guides and support documentation to assist end-users.
  
• Configuration Management: manage application configurations, including settings, permissions, and access controls. Ensure that application configurations are documented and maintained in line with organizational standards.
  
• Collaboration and Communication: work closely with developers, system administrators, and other IT teams to resolve application issues. Communicate effectively with stakeholders, providing regular updates on application status and issues. Participate in project meetings to provide input on application support requirements.
  
• Continuous Improvement: identify areas for improvement in application performance and user experience. Propose and implement solutions to enhance application efficiency and reliability.
  

Requirements:

• Degree in Computer Science, Information Technology, or related field.
• Preferably 2 to 5 years of experience in application support, software troubleshooting, or a related role.
• Beneficial to have experience in an Aircraft Engine Maintenance Repair and Overhaul shop.
• Good knowledge of MS Excel, databases, SQL, and scripting languages (e.g., Python, PowerShell).
• Strong problem-solving and analytical skills.
• Excellent communication and interpersonal skills.
• Ability to work independently and as part of a team.
• Strong customer service orientation.
• Training provided for candidate without prior experience.

Key Responsibilities:

• Liaise with Solutions team to understand systems design
• Perform installation, configuration and maintenance of network devices and AD server / management server on-site
• Assist Project Managers and Engineers to prepare systems related diagram for the project implementation
• Ensure systems design conforms to contract and technical requirements
• Engage with back line support and/or with vendor’s support to diagnose and rectify technical problems to effectively resolve project implementation issues
• Attend to preventive and corrective maintenance to backend system
• Ensure all work activities comply with the company’s safe work procedures

Competence (Knowledge, Skills and Abilities):

• Skills in relating to and servicing the customers with a win-win mind set
• Skills in troubleshooting technical problems related to servers, routers, switches, and IoT devices.
• Good knowledge of the security and surveillance solutions landscape and industry trends
• Knowledge on Microsoft Clustering, Active Directory, Agent VI, Milestone, VMware and IT Security is required
• Knowledge of CentOS, Ubuntu, VMware (ESXi), Firewall, Networking, and Windows Server OS
• Proficient in Active Directory, Certificate Services, Virtualization technology, and cyber security is required
• Skills in planning and scheduling
• Professional Certificate in MCSE and CISSP would be an advantage

Requirements:

• Minimum Degree in Computer Engineering or related discipline
• At least 3 years’ experience in a similar capacity
• Experience in installation on Server / Client configuration, Network Storage and IT Network

For personal data protection (PDP) related matters, pls refer to our PDP policy via corporate website at oconnors.co Personal Data Protection Policy.

Epsilon operates a global IP/MPLS network as well as supporting transmission networks. We are seeking a candidate with strong IP/MPLS skills and experience. The candidate would be responsible for ongoing network optimization and technological development for our global IP/MPLS network which support layer2 and layer3 VPN services. The candidate should also express a willingness to participate in projects related to transmission network upgrades and planning exercises.

Responsibilities

• Responsible for the deployment and management of the global MPLS and VPLS (E-Line, E-LAN and IP-VPN) infrastructure.
• Work with solutions design, and technical sales teams to develop complex service solutions for bespoke customer applications.
• Responsible for the deployment and management of the global IP transit, IP peering, and the connection to IXP and CSP.
• Work cross-functionally with product team and project management to generate implementation plans including Method of Procedure (MOP), Bill of Materials (BOM) and Scope of Works (SOW)
• Participate in optical transmission network upgrades and migrations as needed.
• To take up the on-call rotation and out of hours work when required
• Maintain technical and training documentation and develop automation as needed.
• Provide guidance and training to NOC when required

Requirement

• 5+ years of working experience in telecom provider, ISP, CSP or content provider.
• Experience working within a multi-vendor network environment – Juniper, Alcatel-Lucent/Nokia and Cisco are relevant.
• Experience working with network automation tools (Ansible, Python, Jinja, Git) a plus
• Extensive knowledge and experience in Layer 2 switching and Layer 3 routing technologies and protocols including TCP/IP ,OSPF, BGP/MP-BGP, IS-IS, MPLS and RSVP etc.
• Experience working and knowledge in security and firewall.
• Experience working and knowledge in SD-WAN/SASE is a plus
• Knowledge or prior working experience with optical networks is a plus, but willingness to learn and understand the design and operational aspects of transmission technologies is required.
• Demonstrated ability to meet deadlines among multiple concurrent projects
• An enthusiastic and helpful attitude
• Willing to learn new technologies
• Must enjoy working in a fast-paced environment where a strong ability to multi-task is necessary
• Must be highly detail-oriented

Role Profile

This technical solution focused role is accountable to setup applications and database and ensure their optimal performance to support various GovTech projects.

Key Responsibilities:

• Setup the application and database
• Perform analysis and review software application functionality and design and suggest improvement to enhance the design to cater for new services
• Consult with software development team, internal users, and clients to improve application performance
• Administer the application including user account management and configuration of the application
• Generate Test Plans and Test Procedures for User Acceptance Tests (UAT)
• Conduct UAT and prepare final UAT Reports
• Keep a record of configuration changes and scheduling application updates
• Support production issues such as establishing root causes of application issues and liaise with the software vendor to resolve issues
• Take care of application migration and new release roll-out
• Document processes and monitor application performance metrics
• Develop tools needed by L1/L2 that will help them with their investigation process

Competence (Knowledge, Skills and Abilities):

• Good understanding of the software and hardware environments for CCTV/networked cameras system
• Proficient in Video and IoT management application, software analysis and design, as well as proposal write up
• Good knowledge on the key features of the CCTV / Networked Video / Security Camera / Video Management product in the market
• Sound network knowledge (Internet Protocols, TCP/IP, DNS, DHCP, SNMP, Network Architecture etc.)
• Familiar with Golang, Node JS, JavaScript, Windows Server OS, CentOS, Ubuntu OS and MongoDB

Requirements:

• High level problem solving and communication skills
• Strong technical knowledge with and certification on in-house products
• Able to deal with routine tasks and may perform tasks with some level of complexity
• Take decisions for own tasks in defined degree of freedom
• Able to solve problems in most cases and within guidelines
• Works independently within guidelines, defined procedures and direction

Education & Experience:

• Bachelor’s Degree in Computer Science, Information Technology, Software Engineering or related field
• At least 3-5 years working experience in Video and IoT Management application, software analysis and design

For personal data protection (PDP) related matters, pls refer to our PDP policy via corporate website at oconnors.co Personal Data Protection Policy.

Remuneration: Basic & VB + $800 Flexi Dollars + $60 Mobile Allowance + 3 month performance bonus

Work location: Pioneer

Working hours: Mon - Fri, 8:30am - 5:30pm

Job Description:

• Develop detailed project plans, including scope, timelines, resource allocation, and budgets.
• Define project objectives, deliverables, and success criteria.
• Coordinate and manage project activities to ensure timely and successful completion.
• Provide regular updates on project progress, risks, and issues to stakeholders and senior management.
• Facilitate meetings and presentations to review project status and address any concerns.
• Lead and mentor project teams, including automation engineers, analysts, and other relevant personnel.
• Oversee the design, development, and implementation of automation solutions.
• Identify potential project risks and develop mitigation strategies.
• Develop and manage project budgets, including tracking expenses and ensuring cost control.
• Implement quality assurance processes to ensure that automation solutions meet established standards and requirements.
• Maintain comprehensive project documentation, including project plans, status reports, and technical specifications.

Job Requirements:

• Degree in Engineering, Computer Science, Business Administration, or a related field.
• Proven experience in project management, with a focus on automation or technology projects.
• Strong understanding of automation technologies, methodologies, and best practices.
• Relevant certifications (e.g., PMP, Six Sigma, or similar) are highly advantageous
• Travelling out of country will be required (less than 6x a year)
• Candidates with experience from Robotics companies: strobo, hope technik, rockwell automation, omron, swisslog, would be highly advantageous

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Job Summary:

Drives the design chain value proposition by generating the greatest number of Xilinx design wins in technologies and registrations for customers engaged in Xilinx based product design resulting in growing business. Interface with the engineering departments of customers and suppliers. Performs a variety of product, technical and engineering functions including but not limited to: pre/post sales support, research, design and development.

Principal Responsibilities:

• Work with sales to explore new customer base which use Xilinx products.
• Deliver technical solutions / proposals and provide product presentations to customers.
• Provide technical support to customer which are using Xilinx products from start of development to design win closure.
• Provide technical training to customers
• conduct seminars and workshops
• Willing to travel
• Must be proactive and constantly striving to keep abreast of latest advances in Xilinx technology.

Job Level Specifications:

• Must be highly motivated and able to work independently
• Strong interpersonal and communication skills.
• Good team player
• Good analytic and problem-solving skills
• Integrity & Trust
• Excellent in time management.

Work Experience:

• Minimum 3+ years work experience in Programmable Logic based design / ASIC / Processors / GPU
• Proficient in VHDL/Verilog/C++ programming
• Experience working on AI solutions development using Caffe, Tensorflow, Keras, Pytorch frameworks is a strong plus.
• Experience working on systems in one or more of the following areas is a highly desired: Software Defined Radios, Wireless Communication Systems, Artificial Intelligence,.

Education and Certification(s):

• Bachelor's or Masters Degree in Engineering or equivalent.

Hardware Engineer

Responsibilities:

• Develop of real time embedded systems
• Able to execute development project independently throughout the development implementation and manufacturing process
• Perform debugging, testing and improvement of current products
• Provide in-house/on-site technical support, documentation and technical training

Requirement:

• Degree in Embedded system/Electronics/Electric or equivalent
• Experience in Electronic hardware design inclding circuit analysis, IO interface to microprocessor and component selection for the performance enhancement on current and new product
• Experience in PCB schematics and artwork layout is highly preferred
• Experience in C and Assembly language programming

Main Responsibilities / Critical tasks

• Responsible to assist in the design of controls system and programming coding to meet the budget and time expectations as defined by Project Manager
• Able to Modify controls design and other documents according to the Mikron Processes & Standards and compliance to industry standards as according to customer URS.
• Develop specific program per customer and project requirements based on Mikron Coding Standard.
• Participate in controls and validation activities, conduct test and debug, internal buy-off, FAT and SAT.
• Work together with the Customer, Project Manager, Assistant Project Manager, Process Manager, Design Engineers and other project team members as required.
• Communication with Customer as per project requirements.
• Collaborate with suppliers as needed.
• Update PCT and task completion accordingly

Skills and knowledge requirements:

• Education: Bachelor’s degree/diploma in engineering or equivalent; or at least 5 years related experience and/or training; or equivalent combination of education and experience.
• Minimum 3 years of related work experience.
• Must be able to travel as requested
• Ability to make sound decisions, work independently and within a team structure
• Ability to function in a fast-paced work environment
• Well organized and respectful of project deadlines
• Ability to communicate in an open, clear, precise and effective manner with customers, peers and all levels of management
• Knowledge in Allen Bradley and Siemens-S7 programming.
• Computer skills including intermediate to advanced Microsoft Office Tools (Outlook, Word, PowerPoint) and Excel spreadsheet experience; Microsoft Project; Design software; Internet software; Manufacturing software and SQL/Dbase Database software.