We specialize in providing innovative solutions for the implementation, installation, commissioning and maintenance of IoT, SCADA, Remote Monitoring, Security and Process Control Systems

Responsibilities

• Use designer tools to define delightful, animated, user-friendly SCADA screens, so that information is shown correctly, easy to read and find
• Use of configuration tools to configure IO points to interface with field controllers
• Plan and perform in-house/on-site software testing activities, retrieve and analyze log files, as well as assist in implementing technical fixes, patches and upgrades
• Timely report of work progress, issues to direct supervisor
• Any ad-hoc task as assigned by manager

Prerequisites

• Diploma in Engineering or any other similar disciplines
• Work or internship experience in any of the 3rd party SCADA system (such as Wonderware, iFix, Citect, Ignition)
• Able to work independently, meticulously and outcome driven with good eye for details
• Take ownership of UI design work is a must
• Able to interact and communicate effectively with people of different levels and cultures, and provide timely delivery of assigned work

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 5 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler), Photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Job Title: Network Engineer (ID4351)
Location:Tiong Bahru
Working Hours: Mon to Fri 8.30am-6.00pm
Salary: $4000-$5000


Job Description
• Provide L2 tech support and diagnose problems through onsite or remotely troubleshooting
• Install, configure, troubleshoot and support (after-sales) networking & network security equipment (major brands)
• Provide technical support and network consultancy service from time to time
• Maintain network documentation
• Ability to oversee customers’ requirements and translate to feasible solutions &/ or design
• Taking ownership of customers’ technical issues reported & tracking them through resolutions timely and escalate to appropriate channels when applicable
• Install, support and maintain hardware and software network infrastructure according to best practices including routers, switches, wireless access controller/ point, firewalls etc
• Evaluates existing network equipment and/ or users’ needs to analyse, design, recommend and implement system changes
• Adapt and support to enhancement and change to network configurations, whenever deemed necessary
• Support technical needs in the company and/ or clients’ environment through integration of new and existing technologies
• Assist enterprise solution/ sales team in joint-calls with working business partners & technology key vendors in products demo, PoC sessions, sit-down discussion, site survey, attendsite briefing etc. for projects related meetings

Requirements
• Knowledge in network topology
• Ability to configure major brands of firewall devices
• Ability to configure major brands of endpoint protection software
• Ability to setup/ manage network switches (e.g. configure VLAN and L2 switching)
• Ability to setup/ manage wireless network devices
• Advantage if you have good knowledge in enterprise network equipment & network security – including technical presales pitching &/ or hands-on experience
• Advantage if you have good knowledge on WAN network: MPLS VPN and IPsec VPNs, SSL
• Diploma/ Degree in Information Technology IT/ Telecommunication / Computer Engineering or relevant IT certifications
• Prefer someone (but not a must) with Cisco CCNA/ CCNP certificate or other equivalent network certificate
• Min. 3 years of expertise in implementation / administering and troubleshooting network and IT infrastructure equipment
• Must be resourceful and able to take initiative in a dynamic environment
• Strong written and oral communication skills
• Ability to handle documentation and explaining network and IT architecture
• An advantage if candidate from similar industry/ worked in SI environment
• An added advantage if candidate has system infra knowledge experience
• Well-versed in firewall e.g. Fortinet, Sonicwall will be major advantage

Job Title: System Engineer (ID4397)
Location: Tiong Bahru
Working Hours: Mon to Fri 8.30am-6.00pm
Salary: $3000-$4500

Job Description
• Manage the IT infrastructure includes Azure Cloud, hardware and software application and provide support to end-users
• To perform the installation of updates and patches for all IT systems including planning for scheduled preventive maintenance
• To manage in-house POS system and related hardware
• To explore new, faster and business processes and implement analytics for meaningful decision for management
• To ensure that all automated system processes (data backup etc.) and scheduled tasks (batch jobs) are properly carried out on time
• To update and maintain asset list for all hardware and software
• Prepare and maintain up-to-date documentation including SOP, user guide, network layout, system design and configuration
• Perform other duties assigned by management

Requirements
• Knowledge in network topology
• Ability to configure major brands of firewall devices
• Ability to configure major brands of endpoint protection software
• Ability to setup/ manage network switches (e.g. configure VLAN and L2 switching)
• Ability to setup/ manage wireless network devices
• Advantage if you have good knowledge in enterprise network equipment & network security – including technical presales pitching &/ or hands-on experience
• Advantage if you have good knowledge on WAN network: MPLS VPN and IPsec VPNs, SSL
• Diploma/ Degree in Information Technology IT/ Telecommunication / Computer Engineering or relevant IT certifications
• Prefer someone (but not a must) with Cisco CCNA/ CCNP certificate or other equivalent network certificate
• Min. 3 years of expertise in implementation / administering and troubleshooting network and IT infrastructure equipment
• Must be resourceful and able to take initiative in a dynamic environment
• Strong written and oral communication skills
• Ability to handle documentation and explaining network and IT architecture
• An advantage if candidate from similar industry/ worked in SI environment

Key Responsibilities:

• Develop power measurement device with wired & wireless connectivity.
• Design & Develop firmware for HEMS (Home Energy Management System), IoT gateway, and Human-Machine Interface products.
• Develop peripherals using MCU/DSP.
• Develop applications/products based on the Linux Platform.
• Conduct design reviews, bug fixes and update/create design documentation.
• Work with other team members to test and verify system-level functionality.

Requirements:

• Bachelor/Master of Electrical/Electronic/Computer Engineering
• Min. 5 years of working experience in R&D or product development as a firmware engineer.
• Extensive experience in Embedded Programming using C/C++/Rust for Embedded Linux and MCU
• Experience in real-time operating systems (FreeRTOS…etc.)
• Source code control and management using Git.
• Knowledge of Python to create debugging scripts.
• Experience in coding and debugging various communication interfaces and protocols (I2C, SPI, UART, Modbus RTU/TCP, RS232/485)
• Experience in wireless communication systems and protocols (IEEE 802.15.4, Wi-Fi, Bluetooth, Zigbee, Thread, LTE, NB-IoT, LoRa)
• Able to read schematics, and utilize Oscilloscopes and other test equipment to debug Firmware issues.
• Remote firmware update and bootloader design

Responsibilities:

• To support your Team Head in managing the RMA team to deliver reliable railway infrastructure for safe passenger service through cost-effective maintenance of the track, conductor rail and civil structure systems respectively
• Achieve complete understanding and alignment to our company Safety & Health, Security and Asset Management policies
• Achieve complete understanding and alignment to our department Vision, Mission and Core Values and communicate these to your RMA team for their necessary complete understanding and alignment
• Achieve complete understanding and alignment to our department maintenance plans
• Participate in night work and emergency recovery activities when necessary
• Achieve operational understanding of Rail Maintenance fundamentals
• Achieve operational understanding of DTL’s Rail Maintenance Preventive Maintenance (PM) Works
• Achieve operational understanding of DTL’s Rail Maintenance Corrective Maintenance (CM) Works
• Achieve operational understanding of our possible mitigation and recovery methods for conditions exceeding the DTL track alignment tolerance limits
• Achieve operational understanding of our detection systems
• Review and participate, when necessary, in the planning of the preventive maintenance (PM) regime for your RMA team to ensure practicality and alignment to their rostered work schedule
• Deploy prudent resource management and prioritization to facilitate productivity and timeliness in implementing the planned RMA PM regime to achieve the New Rail Financing Framework (NRFF) maintenance KPIs
• Review and participate, when necessary, in the planning of the corrective maintenance (CM) regime for your RMA team to ensure practicality and alignment to their rostered work schedule
• Maintain an active and up-to-date database for DTL Rail Replacement Summary
• Track and analyse DTL track alignment data to recommend the next courses-of-action, which may include mitigation and recovery processes
• Develop, review and maintain work instructions and respective risk assessments for your RMA team maintenance processes in a timely manner to ensure the contents are relevant, up-to-date, practical and aligned to OEM recommendations and best practices
• Participate in all maintenance, system and safety audits related to your RMA team
• Develop and communicate emergency response plans and drills to your RMA team for timely implementation when necessary
• Organize regular communication and feedback sessions with your RMA team
• Monitor the performance of each RMA team member to recommend commendation and disciplinary action, when necessary, to your Team Head
• Identify RMA staff with high potential and recommend their progression plans to your Team Head for succession planning
• Support your Team Head in LTA or our department projects related to your RMA team
• Assist in taking over of tracks of DTL new stations and depots
• Manage and supervise contractor maintenance of rail
• Develop and implement failure management and emergency response procedures and processes

Requirements:

• Recognized Degree in Engineering
• Adept in strategic-planning, analysis and decision-making
• Adept in resource and criticality prioritization
• Good interpersonal, communication, collaboration, negotiation and presentation skills
• Growth mindset with good accountability
• Team management
• Curious approach to self-learning
• Self-motivated, resourceful and process-oriented to achieve positive outcomes
• Must be able to differentiate colors for work purposes

By submitting this application for this position, you acknowledge that you have read the Data Protection Policy for Job Applicants (the “Policy”) of SBS Transit Ltd and its subsidiaries, affiliates and related corporations (‘SBST”) and consent to:

a. The collection, use and disclosure of your personal data by SBST for the purposes of your application and potential employment with SBST and the purposes set out in the Policy: and

b. SBST’s retention of your personal data for 2 years for consideration of future job opportunities (where applicable) from the date of submission of application.

We regret to inform that only shortlisted applicants will be notified.

• Managing the planning and design stages of construction projects.

• Contributing technical expertise to project drawings and designs.

• Performing cost calculations and preparing financial projections.

• Preparing work schedules in collaboration with the project manager.

• Liaising between contractors, subcontractors, vendors, and suppliers.

• Overseeing construction engineering processes.

• Performing regular tests on materials and procedures to ensure compliance with industry regulations.

• Ensuring that the construction project is completed on time and within budget.

• Documenting processes and keeping detailed construction logs.

• Presenting construction project progress updates to clients and senior managers.

Job Description & Requirements

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

Reporting directly to the manager and fulfilling the Manager's duties in their absence.

* Being well-versed in internal operations.

* Taking minutes at meetings.

* Forwarding and distributing mail as required.

* Preparing and filing relevant documents.

* Supporting managers in devising plans in order to improve business performance.

* Monitoring various operational aspects.

* Collaborating with the logistics office.

* Assigning tasks to employees and hiring new staff.

* Providing training, instruction, and guidance to subordinate employees to ensure their knowledge of company products, fabrication and assembly methods, management skills, and the effective use of accepted work processes and standards.

General information

As a Service Engineer, you will be responsible for executing Service work with low to medium complexity according to work instructions and in accordance with ABB standard processes, quality standards and safety guidelines.

Reporting to Service Manager, you will be delivering quality customer service to satisfy customers. In close co-operation with customer and other ABB teams, take actions to identify new Service business opportunities for ABB.

Health and Safety

• Apply safety rules and safe practices as well as environmental responsibilities
• Report unsafe practices and incidents

Service Delivery

• Execute after sales business activity preventive & condition based maintenance, trouble-shooting, repairs and commissioning.
• Actively coordinate with operation supervisors for optimal service potentials from regular customer interactions.
• Proactively involve in self learning and practical exposure for continuous competence and productivity improvement.
• Maintain high level of personal leadership on safety and quality on work performed as well as documentations.
• Reports early any technical/contract/quality/program/cost issues to management, along with recommendations for resolution.

Additional Requirement

• Understand customer needs & manage customer relationships
• Co-operate actively with other ABB units to achieve common targets
• Support sales team

Leadership

• Provide leadership and coordination for the service team
• Create and develop good team spirit

Continuous improvement

• Proactively identify area of improvement eg. Self-technical knowledge, job safety and etc
• Participate in discussion, meeting, training and e-learning

Your background

• Diploma, ITC or equivalent in Electrical/Electronics engineering with at least 3 years hands on repair and service experience on electrical equipment.
• Experience on LV & MV VFD will be an advantage
• Strong electrical or electronics engineering fundamental knowledge. Knowledge on theory, structure, application, testing methodology and component fault diagnosis/analysis will be added advantage.
• Strong self-discipline with initiative and learning spirit with positive attitude, team work and responsibility.

Job Description

Common accountabilities:

- Proficient in technical knowledge to ensure team performs at a high level. Is recognized as a leader in own area and may formally train Specialists/Senior Specialists. ​

- Understands how main business drivers may impact on own area. Can assess complex problems with broad impact on the activity, improve processes, recommend solutions and risk mitigation plans. Able to communicate complex information.​

- Works with a high level of autonomy, based on management directions. Leads projects or contributes to broad cross-functional projects. May contribute to planning of resources and budget.

Specific accountabilities:

Engagement management:
* Plan and manage all solution-oriented activities of IT bid projects including additional services
* Be the prime Amadeus point of contact for the customer on functional and technical matters
* Lead amadeus functional and technical SMEs interacting with the customer
* Ensure optimised use of customer and Amadeus ressources during the engagement phases (familiarisation, gaps indentification, gaps description, scope optimisation...)
* Coordinate the joint elaboration of the solution design
* Identify and manage all potential competitive threats and risk associated with the solution
* Ensure effective handover of IT sales projects to project implementation teams

RFP/RFI engagements and unsolicited proposals:
* Set up high-level project timelines for the RFP answer. Identify & secure resource requirements from relevant groups (PMs/Dev/ADP) and coordinate all components/inputs to the answer
* Produce solution-related documentation for IT customer proposals

* Produce solution-related documentation for IT customer proposals & prepare the response document for submission

*Lead all T2RL bids with all processes complied as per T2RL portal requirements.

Scope definition and approval process
* Support Technical Scoping workshops in identifying and referencing all interfaces to be developped. Interaction with Amadeus and customer senior management required
* Coordinate different functional streams on the customer side with Amadeus PM and Product Definition teams in order to ensure end to end solution consistency
* Minimize functional and technical gaps throughout the sales engagement
* Coordinate the approval process ensuring sign off of customer and Amadeus groups

Sales support during Commercial and Contractual discussions
* Ensure alignment between the proposed solution with the commercials
* Support Sales in contract negotiations for solution-related issues and review solution-related contract schedules

Portfolio evolution
* Feed market & customer solutions requirements to Product Management for product qualification (private or community product, itemised product ot included in baseline)
* Whenever possible, analyse solution offerings of competitors and inform Product Management and IT Marketing accordingly

About ideal candidate

• Master degree in computer science, or MBA
• Proven experience and passion for pre-sales, experience on RFP/RFI process, T2RL processes, hands-on live product demos
• Minimum 10yrs experience in Airline IT product presales or product marketing.
• Proven skills in using data to drive solution decisions.
• Ability to set and manage priorities judiciously.
• Effective communication skills towards customers, executive stakeholders, and teams.
• Motivated self-starter with the ability to learn and adapt.
• Experienced in project management, stakeholder coordination & senior management reporting.

• Manage end-to-end recruitment process
• Administer on-boarding and off-boarding programs
• Coordinate and communicate with other departments to meet staff training needs
• Manage staff training matter and administer training related funding and claims
• Ensure the correct recording of all relevant record logs and documentation
• Organise and execute employee engagement and welfare activities
• Maintain and update employees' personal files
• Follow-up on contract renewal and expiry
• Handle employee relations matter
• Handle HR letters and correspondence
• Support HR activities and initiatives
• Provide support on office administrative matter
• Other general HR admin duties

* Reporting directly to the manager and fulfilling the Manager's duties in their absence.

* Being well-versed in internal operations.

* Taking minutes at meetings.

* Forwarding and distributing mail as required.

* Preparing and filing relevant documents.

* Supporting managers in devising plans in order to improve business performance.

* Monitoring various operational aspects.

* Collaborating with the logistics office.

* Assigning tasks to employees and hiring new staff.

* Providing training, instruction, and guidance to subordinate employees to ensure their knowledge of company products, fabrication and assembly methods, management skills, and the effective use of accepted work processes and standards.

- Candidate must possess at least Bachelor's Degree/Post-Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.

- At least 5 Year(s) of working experience in the construction-related projects

- Abilities to work with Consultants

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

Job Description & Requirements

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

Responsibilities and Duties:

•     Attending to and resolving resident’s feedback and / or complaints, arranging for site inspections

•     Assign supervisor to attend joint inspection on reported defects

•     Generate work schedule for Subcontractor to rectify defects

•     Liaise with project stakeholders (Subcontractors, HDB, Town Council, Consultants)

•     Draft and reply to feedback/queries, message residents, proper documentation/ recordings of defects including hardcopy/ on-line submissions

•     Maintain and upkeep of Building Service Centre

•     Administrative duties such as proper recording and filing of documents as per ISO standards

•     Any other duties as assigned by superior

Qualifications:

•     Minimum pass in at least 5 subjects, including English, at GCE “O” Level or Nitec Certificate

•     Prior customer relations work experience is preferred.

•     CRO shall be capable of communicating effectively in English and one other Singapore official language and have a pleasant personality.

•     Possess Singapore WSQ Certificate in Service Excellence (Level 1) would be an advantage.

•     Customer oriented with good communication and interpersonal skills.

•     CRO shall be competent and possess the skill, knowledge and ability to manage the public relations with residents effectively.

Responsibilities

• Perform risk assessments to ensure all measures are taken to prevent injuries or accidents before commencing any work
• Initiate and lead projects relating to cost reduction, efficiency/power, and reliability improvements.
• Work with stakeholders from cross functional teams to establish the project timeline, the execution plan and identify the resources required
• Ensure the timely completion of key milestones as well as delivery of key project indicators.
• Lead in resolving any quality issues and providing timely updates on the progress.
• Perform data analysis to identify opportunity for improvements or support any ongoing investigations

Requirements

• Min Degree in Materials / Chemical Engineering
• Strong knowledge and experience in process integration & development methods
• Knowledge in PFMEA, DFMEA, DOE, Fish-Bone Analysis
• Strong technical analysis competency with the use of analytical tools like JMP, Mini-Tab for troubleshooting and datamining
• Ability to work in a fast-paced environment and render support to production as and when needed

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Trendlines Medical Singaporeoperates through investing in, incubates, and provides a range of critical services to nurture and support Singapore-based entrepreneurs and start-up companies in the medical device sector from development to commercialization in the global market.

We are looking for Senior/Product Engineer (Medical Devices) to join one of our portfolios located in Singapore. More about us and our portfolios: https://www.trendlines.com/business-units/medical-singapore/

Roles & Responsibilities:

• Perform design improvements to our existing products, in areas of electrical/electronic and pneumatic systems.
• Conduct bench test, perform design verification and validation of design in accordance with ISO 13485 and applicable regulatory requirements.
• Lead transfer of product design to contract manufacturer in areas of assembly, manufacturing, test, quality and cost.
• Troubleshoot issues, provide design solutions, verify and validate solution and coordinate implementation.
• Liaise and manage contract manufacturer and production processes, ensure consistent quality conforming to medical device standards. Involve in the design and fabrication of jigs and fixtures for production assembly and test.
• Perform supplier sourcing and qualification for assembly/sub assembly/part.
• Perform risk assessment for design and process, drive recommended action to closure.
• Possess ownership of engineering documentation as per SOP
• Perform other tasks as required to meet project timeline and objective.

Skills & Requirements:

• Bachelor’s Degree qualifications in electrical & electronics engineering, biomedical, mechanical, or related engineering fields
• Minimum 3 years’ experience in product design modification and improvement for the medical device industry
• Knowledge of medical device regulatory, ISO13485, IEC62304 standards
• Some knowledge of microcontrollers and embedded firmware application will be advantageous.
• Experience in manufacturing preferred
• Initiative, self-motivated and able to work independently in the defined scope of work.
• Company objectives driven mindset, with company shares allocation based on performance.

OFFICE / ADMINISTRATIVE CLERK

MONDAY TO FRIDAY

0900AM TO 0600PM

ABLE TO PREPARE INVOICES, QUOTATIONS AND ALL OFFICE DOCUMENTS

SUPPORTING OPERATIONS WORK.

MUST HAVE COMPUTER SKILLS , I.E MICROSOFT OFFICE, EXCEL, WORD AND POWER POINT.

MAKING PHONE CALLS AND EMAIL TO CUSTOMERS.

UNDERSTAND ACCOUNTING WORK

EXPERIENCE ABOUT 10 YEARS.

SINGAPOREAN OR PR.

The Qualifications:

• A diploma in Mechanical & Electrical or equivalent qualification.
• Mechanical & Electrical Coordination certificate from BCA
• A relevant Advanced Certificate / Higher NITEC / Advanced NBQ with 2 to 3 years of relevant work experience.
• A relevant certificate with 4 to 5 years of relevant work experience.
• NITEC / Higher NBQ with at least 5 years of relevant work experience12.

Duties and Responsibilities:

1. Assist the Project Manager to plan, monitor and control daily works at the project sites, able to read and drawing M&E drawing by using AutoCAD.

2. Implement all policies, activities, procedures, instructions as relevant and required by the QESH management system.

3. Comply with client and applicable legal and other requirements.

4. Implement plan actions from risks and opportunities assessment.

5. Take responsibility for prevention of work-related injury and ill health.

6. Ensure that project operations and document control procedures are adhered to.

7. Plan, coordinate and monitor M&E subcontractor’s activities at project sites.

8. Maintain good house-keeping and implement safety practices.

9. Ensure that all M&E works carried out are in accordance to the drawings, specifications, construction plan, procedures, work instructions, etc.

10. Ensure that inspection and tests are carried out as per Inspection and Test Plans, quality control mechanisms are being used and results are conformed to specifications.

11. Submit sample materials and calibration certificates to consultants for approval.

12. Undertake any and all other duties and responsibilities as so instructed by the superior.

13. Accountable for the quality, safety, health and environmental management and performance at the project site.

The skills required for an M&E Coordinator position:

• Analytical skills: The ability to analyze data and information to identify patterns, trends, and insights.
• Communication skills: The ability to communicate effectively with stakeholders, including project staff, partners, and donors.
• Project management skills: The ability to manage projects, including planning, implementation, monitoring, and evaluation.
• Research skills: The ability to conduct research, including designing research studies, collecting and analyzing data, and presenting findings.
• Technical skills: The ability to use software and tools for data collection, analysis, and reporting.

- Candidate must possess at least Bachelor's Degree/Post-Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.

- At least 5 Year(s) of working experience in the construction-related projects

- Abilities to work with Consultants

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

• Reviewing construction plans and preparing quantity requirements.
• Liaising with site managers, clients, contractors, and subcontractors.
• Scrutinizing maintenance and material costs, as well as contracts to ensure the best deals.
• Preparing reports, analyses, contracts, budgets, risk assessment, and other documents.
• Advising managers and clients on improvements and new strategies.
• Keeping track of materials and ordering more when required.
• Documenting any changes in design and updating budgets.
• Establishing and maintaining professional relationships with external and internal stakeholders.
• Liaise with Reporting Superior and Project Managers on costing and variation works including final account with Consultants
• Attendance of site meetings /site visit where necessary.
• Generally covering the scope of a Quantity Surveyor from Pre to Post contract Works (e.g. Tendering to final account).

Engineering:

· Participate in several phases of Projects from concept development, tender, bids, FEEDs, construction, commissioning, execution, modification to completion

· Participate in designing the FPSO, typically including:

Ø Contribute with input to philosophies and design specification for Process

Ø Participate in preparation of technical specifications for topside process modules

Ø Help to develop PFDs, P&IDs, data sheets, etc.

Ø Help to develop material take-off and cost input for Process discipline

Ø Help to ensure the design meets regulatory, class, client and corporate requirements

Ø Give input to the master equipment list

Ø Perform Process calculations and simulations with guidance

Ø Participate in project HAZOP sessions

· Participate in Process discipline activities and provide input to develop and maintain company engineering standards and best practices within the field

· Actively contribute to the development of relevant RFQ’s for module yards, integration yards, newbuild shipyards and equipment packages and prepare technical bid evaluations (input)

· Follow-up with design development, construction and testing activities

· Review vendor documentation to ensure compliance with project requirements

· Proactively support and cooperate with all engineering disciplines to achieve optimal design results including relevant input and comments to other discipline deliveries with guidance

· Work closely with and actively support supply chain, estimation, planning and other project teams

· Provide technical clarifications towards clients, sub suppliers, class and yard with guidance

· Support Technical Maintenance & Support team, Operation Managers and offshore units as and when required, including visiting Units in operation as needed for technical support and troubleshooting

Construction (Yard phase)

· Act as Operations focal point for leak testing activities

Ø Taking part in Commissioning activities

Ø Collation of comments and test pack review

Ø Review P&ID’s to gauge scope of testing and use engineering knowledge to question test boundaries

Ø Participate in the leak testing when commenced

· Take part in authoring, reviewing and commenting on Operational procedures

Ø Review and comment on new BWO operations documents from a process perspective

Ø Review and comment on client supplied subsea operating guides form a process perspective

· Start-up planning

Ø Preparation and review of start up plans

Ø Assist in closure of actions

· System line walking

Ø Process familiarisation

Ø P&ID line walking to ensure drawings are correct

Ø Line walk for final acceptance on commissioning handover

· Operations representative for some commissioning activities

Ø Attend on Operations behalf to witness commissioning and testing

Ø Be local in the ICSS testing to learn how the ICSS works

Ø Review control loops etc to gain knowledge of the different control systems

· Operations representative in meetings such as procedural HAZOP, ALARP workshops and planning meetings

Ø Attend as Operations representative and add input from engineering experience

Proactively support and cooperate with all disciplines to achieve optimal results.

Operations:

· Assist the relevant unit in all matters relevant to Process and Safety

· Liaison with the Asset Maintenance team and actively contribute with technical and advisory support to Offshore Management Team, Asset Manager and Technical and Maintenance Managers in terms of Process Systems

· Review and assist in providing the engineering solutions for Technical Query and Management of Change Request from the Facility

· Preparation of process deliverables in support of work pack preparation including; PFDs, P&IDs, Equipment and Instrument Datasheets, etc.

· Perform and check process design calculations and process simulations

· Provide input to Asset Planning on modification scopes; engineering, fabrication and implementation phases.

· Support studies including HAZOP, HAZID, Risk Assessments as required.

· Provide input for variation orders, including cost estimates and justification.

· Actively contribute to Process discipline activities and provide input to develop and maintain company engineering standards and best practices within the field

· Continuously make suggestions for improvements in all spheres of influence

Job Description & Requirements

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.