Summary of the Job: (Primary function of the job)

· Produce complete control solution and software design base on customer specification and Sys-Mac standardized practice

· PLC based software control design & HMI software design

· Integration of third-party equipment’s and components into software design

Example data communication, barcode scanner, motion control, Robot Controllers, vision system and signal conditional

Job Description:

· Developing and troubleshooting PLC & HMI/ SCADA program

· Developing and integration with MES or Database systems.

· Troubleshooting communications with MES or database.

· Troubleshooting electrical components & system control

· Prepare Machine I/O, flow chart, interface time chart, data allocation list, setup procedure and software code

· Documentation of machine operation manual for the project

· Liaise with the Customer, Design and Project Engineer for the software development and execution of the project

· Execute Engineering Change Notice (ECN) for change of software

· Maintain proper project documentation

· Provide training to End users and technicians.

· Adhere to all health and safety rules and procedures

Job Requirements:

· Min. Bachelor’s degree in Electrical Engineering/ Electronics/ Automation Control or equivalent

· Min. 5 years relevant experience in Automation project

· Experience in PLC programming & SCADA design is a must

· Knowledge of Mitsubishi, Allen-Bradley, SCADA (WinCC, Ignition)

· Knowledge of C++, C#, .NET is an added advantage

· Knowledge of robot programming is an added advantage

· Able to perform assigned task independently or through team activities

· Self- motivated, resourceful and organized

· Willing to travel overseas for assignments at short notice

· Good interpersonal communication skills

Requirement

· Min. Diploma in Building /Quantity Surveying /Engineering or equivalent

· Min. 2-3 years of relevant experience

· Fresh Graduates also welcome

· Able to read construction, architectural & engineering drawings

· Able to interpret drawings for costing and estimation

· Familiar with Microsoft Office

· Ability to take -off quantity with accuracy

· Able to meet tight deadlines

Jobs Description

· Prepare technical proposal & cost estimation for project tenders

· Source for local/oversea suppliers, fabricators & sub-cons

· Prepare LOA of suppliers & sub-cons

· To prepare & submit progress claims, variation order & finalization of account

· To prepare & certify claims for suppliers and sub-contractors

· Develop, review and monitor the compliance of tender and contracts policy and guidelines, in line with the industry best practice

· Ensure all estimates provided are at a competitive level

· Prices/forecast the cost of the different materials needed for the project

· Prepare tender documents, contracts, budgets, bills of quantities and other documentation

· Sourcing, evaluate and compare subcontractors/suppliers’ quotation

· Measure, value and certify the work done on site

· Liaise with client and other construction professionals, such as site managers, project managers and site engineers

· Ad hoc duties when assigned

The Career Conversion Programme (CCP) (Train-and-Place) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand. This programme is jointly supported by the Workforce Singapore (WSG) and Workforce Advancement Federation (WAF). The training programme consists of 15 months of local attachment with Roche.

Who are we looking for?

• Fresh Graduates who have recently graduated, OR;
• Candidates with 2 years working experience and above. Not in a similar job function prior to joining this TnP Programme.

Job Overview:
This position supports facilities operations, optimization and improvement initiatives in facilities management operations, programs and site procedures, with the facilitation of cross-functional collaboration.

Key Responsibilities:
● Support F&E contract reviews in collaboration with F&E internal stakeholders
● Be a central contact for timely Shopping Cart and Purchase Order creation using the appropriate platform.
● Participate in discussions and site visits to identify areas of Continuous Improvements and bring about value enhancements to F&E operations.
● Perform critical thinking/review for harnessing new technologies and methodologies to bring about facility operation enhancements to meet the needs of RSTO community and manufacturing operations.
● Support Facilities operations in delivering site services, such as gathering and analyzing user data, performing Gemba walks, monitoring key conditions and deliverables for supporting Make-Assess-Release activities.
● Manage GMP/Non-GMP change management activities and documentation for improvement initiatives in collaboration with various site functional groups.
● Support engagement communications and activities to internal stakeholders.
● Use of Visual Management tools to provide visibility of project/program status updates.
● Support in reviewing project documentation in adherence to Roche Engineering Manual Lite for expense/capital projects.
● Assist in project coordination and site inspection with internal and external project members.
● Perform any other tasks as assigned by the supervisor.

Safety, Health & Environment:
● Comply with all RSTO’s Safety, Health & Environmental (SHE) requirements, never put oneself and others at safety & health risks, and report any workplace accidents, near misses and hazards as soon as practicable.
● Observe all RSTO’s site security measures at all times, and report any suspicious characters/objects & damaged security mechanisms to Site Security immediately.

Lean Production System:
● Embody PT Lean Production System (LPS), while demonstrating a continuous improvement mindset and behaviors through the use and application of LPS tools for continuous improvement initiatives.

Qualifications & Experience
● Diploma/ Degree in Engineering or Science discipline is preferred.
● Fresh graduates/ mid-career professionals who are switching out of other industries.
● Able to and preferably with experience working across different functions within an organization.
● Flexible and adaptable to work with various project teams and contractors on site.
● Able to work independently, manage multiple tasks/priorities and have good communication and organizational skills
● Excellent knowledge and experience in the use of MS Office tools.
● Have customer service skills, attention to details, accurate and thorough.
● Be self-motivated, able to lead and take initiative.

Who we are

At Roche, more than 100,000 people across 100 countries are pushing back the frontiers of healthcare. Working together, we’ve become one of the world’s leading research-focused healthcare groups. Our success is built on innovation, curiosity and diversity.

Roche is an Equal Opportunity Employer.

Job Description:

• Carry out project site supervision
• Assist Project Engineer on site
• Liaise and manage sub-contractors from all trades
• Ensure that work is carried out in compliance with drawings, designs, specifications and all authorities regulations
• Daily updates of work progress to Project Manager/ Engineer
• A good team player and willing to be stationed at the site office
• Assist in handling and receiving of materials & equipment on site
• Arrange and plan workers working schedule weekly / monthly
• Take daily site minute
• Additional: SMO/SDO duties

Requirements:

• Min 2-3 years working experience in construction site supervisor
• Secondary school/ GCE O Level or above

• Prepare quality reports, perform process audit, develop & implements quality assurance standards, policies, processess & controls.
• Able to liaise & resolve with customers on quality related issues.
• Data compliation, co-ordination and facilitation of all internal and external audits, re-certification of ISO 9001.

Responsibilities

1)Prepare Equipment specifications / data sheets

2) Prepare cable schedule

3) Prepare voltage drop calculations for cable

4) Prepare lighting calculations

5) Prepare sub-station layouts

6) Prepare field layouts

7) Review inter discipline drawings.

8) Knowledge of specialized software (Lighting software etc.)

9) To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

10) To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Software Requirements

Auto cad, MS Excel, MS Word

Qualification

Preferably Bachelor’s degree in electrical engineering

Experience

Preferably 2-4 years of experience

Job duties and responsibilities:

• Liaise with internal departments’ personnel on project related activities.
• Coordinating with Site personnel for updates regarding the work in progress and updating the Client.
• Assist to liaise with customers on job matters.
• Assist to monitor manpower planned for the job tasks and the actual do not deviate and to compile timely report of deviations for discussion at the Management level.
• Assist to monitor the tools, equipment and materials planned for the various projects for their availability and timely delivery.
• Monitor departments’ productivity indicators and to compile report for HODs and Management perusal and follow-up actions.
• Monitor progress of the project according to plan schedule to meet deadlines.
• Compile Work Instructions for all the jobs.
• Ad-hoc assignments assigned by the management.

Job Requirements:

• Degree/diploma holder in Engineering or its equivalent.
• At least 1-year experience as Planner in Manufacturing, Petrochemical, Pharmaceutical and Oil & Gas Sector.
• Knowledgeable in MS Access, MS Office
• With interpersonal skills.
• Good planning and negotiating skills.
• Can work with minimum supervision.

Summary of the Job: (Primary function of the job)

· Produce complete control solution and Electrical design base on customer specification and
Sys-Mac standardized practice

· Integrate and interface of third-party equipment’s into electrical design.

Example barcode scanner, Robot controllers, motion controller, vision system etc

Job Responsibilities: (Key responsibilities of the job)

· Execute of circuit design according to international electrical standard

· Prepare circuit diagram for wiring execution

· Prepare Bill of Material (BOM), I/O List

· Initiate Purchase Request (PR) on order of electrical components to be used for the project

· Liaise with the Supplier, Customer, Design and Project Engineer for the electrical design and wiring execution of the project.

· Provide thorough testing of machine functionality to verify electrical wiring and safety completeness.

· Work with other members of the control department to continuously improve method of integrated control technology

· Prepare of Machine Operation Manual for the project.

· Execute Engineering Change Notice (ECN) for change of electrical design

· Maintain proper project documentation.

· Adhere to all health and safety rules and procedures

· Support in FAT / SAT tasks

Job Requirements

· Min Diploma in Electrical Engineering/Electronics/Automation Control or equivalent

· Min 3 years relevant experience in Automation project.

· Ability to design electrical circuit, perform electrical calculation

· Knowledge of Solidwork CAD will be an added advantage

· Experience in hand on wiring skill on panel or machine

· Knowledge of AutoCAD software will be an added advantage

· Able to perform assigned tasks independently or through team activities

· Self-motivated, highly resourceful and organized.

· Willing to travel overseas for assignments at short notice.

· Good interpersonal communication skills.

1, Project RC subcon supervisor

2, Manage a group of RC workers' daily activities

3, Supervise concreting works

4, supervise formwork works

5, supervise rebar works

6, Manage on site safety works

7, Coordination with Main Contractor for the subcontract works

8, Attend on site inspection

9, Budget control on site

10, Make sure the project is on schedule, with good quality, etc.

Who We Are

We are an Artificial Intelligence (AI) technology backed by Shell, one of the world's leading energy companies, dedicated to tackling the most complex issues in the energy sector through groundbreaking research and development in AI and Data Science. Founded in Singapore, our ultimate goal is to establish ourselves as the leading hub for AI and Data Science R&D in Southeast Asia.

We are looking for a Software Engineer to join our dynamic team. As a Software Engineer, you will work on designing, developing and improving key components of the technology stack related to AI, data engineering, high-performance computing (HPC), geophysics, among other specialised topics. We are looking for people from various development backgrounds but most importantly for someone who is passionate about solving challenging problems and can think out of the box.

Responsibilities

• Design, develop and improve key components of the technology stack in high-paced, high-impact real-world projects.
• Apply the technology on real-work and high-impact client projects.
• Maintain high code quality standards and be accountable for the work delivered.

• Bachelor's or Master's degree in Computing, Science or Engineering with 2 years+ of software development experience.
• High proficiency with Python is a must. Experience in C, C++, Rust or other programming languages is a plus.
• Good aptitude at abstract thinking and problem solving. Good understanding of complex algorithms and data structures.
• Experience is required with essential development tools such as Git, Linux Shell Scripting, Vim/Emacs, etc.
• Experience with parallel computing, system programming, full-stack development, web development can be a plus.
• Ability to work effectively in a fast paced environment with high expectations.

Why Join LRD?

LRD offers a conducive work environment in a company culture that values authenticity, integrity, technical skills, teamwork and results. Here are some of the opportunities offered by the position:

• You are always presented with new challenges to solve intellectually stimulating problems. The work never gets stale, mundane or boring.
• Continuous learning opportunities to develop your technical expertise in many subfields of AI, ML, HPC, Geoscience, Engineering, etc.
• Your work will have immediate impact on high impact real world problems such as natural resource exploration and energy security.
• Have your work recognised with publication opportunities in top scientific conferences and journals.
• Be rewarded for your contributions with high performance bonuses well above market rate.
• Friendly and casual working environment.

REPORTING TO:

Maintenance Manager

General Scope :

• Support in implementation and participate in the continuous improvement effort in the areas of Safety, Quality, Environment and Health Management System (for example SS506 part 3, ISO 9001, ISO14001, OHSAS 18001, IATF 16949).
• To have a legal obligation to act in a responsible manner for the safety of themselves and other persons who may be affected by their actions or omissions at work.
• Assist the Management in ensuring that Major Accident Hazards are reduced to As Low as Reasonably Practicable (ALARP) and escalate when necessary.
• Ensure compliance to Customer Specific Requirements (CSR).

Main Duties & Responsibilities :

• Manage day-to-day maintenance services of electrical and field instruments in the process plant.
• Lead in the investigation/trouble-shoot of instrument fault or failure and provide effective and viable corrective and preventive action.
• Analyse and improve equipment reliability of plant to prevent recurrence with production group and contractors.
• Good knowledge and hand-on experience with DCS and PLC system.
• Prepare long-term maintenance plan for plant instrument, CV, Motor & Electrical Equip etc.
• Manage annual shutdown maintenance (Work planning, Management of actual site work, Liaising with contractors and production group).
• Manage in-house contractors to execute maintenance timely and effectively.
• Manage inventory control, quality of in-house contractor and vendor work.
• Responsible to ensure ISO/Mandatory calibration document, instrument files and work order documentation is timely complete with accurate in accordance with SOP
• Develop, revise and review of SOPs for maintenance/inspection of plant electrical and instrumentation equipment (eg. TI, TT, PI, PT, CV, on/off valve, motor, Switchgear, MCC etc.).
• Prepare documentation pertaining to procedures, qualities and safety of maintenance work.
• Ensure all maintenance activities comply with EHS policies.

REQUIREMENTS

• Degree in Electrical, Electronics, Instrumentation engineering or the equivalent.
• Min 5 years of experience as an E&I Engineer in chemical plant.
• Basic understanding of maintenance technology, equipment, instruments, electrical and manufacturing process.
• Demonstrate ability to manage contractors/vendor independently and effectively.
• Good interpersonal and communication skills.

PT Trakindo Utama Singapore Branch is expanding! The Power Systems department is looking for two exceptional project engineers to bolster the department's capabilities! Aspiring applicants can look forward to a dynamic career, engaging stakeholders on all aspects of their electrical needs, and to exercise their creativity and robustness in delivering solutions and customizations! Our office is located just 6 minutes away from Tuas Crescent MRT, within walking distance from the MRT Exit.

We invite aspiring applicants to join our team, and experience the prestigious legacy of our Company, let's advance forward together!

Primary Objective of Position

• Responsible for all electrical aspects and management of projects, including tendering, design, drawing, scheduling, purchasing, testing, packing, shipment and commissioning of power generation sets on site.

Duties & Responsibilities

• Coordinate all electrical interfacing of designated projects to meet specifications
• Instruct draughtsperson to prepare electrical drawings for tender replies and awarded projects according to customers' specifications
• Review returned drawings and modify as required for construction
• Coordinate with contractors on genset build up
• Provide specifications for control panels, generators and switchgears to vendors
• Liaise with vendors for quotations to procure/fabricate
• Coordinate with Parts Dept on order for CAT parts
• Assist with final technical inspections and testing of equipment
• Prepare packing list and coordinate with HPL on packing, delivery and shipment
• Perform on site commissioning as and when required
• Prepare project costing and report to the Project Manager
• Attend/Conduct engineering and project meetings both in Singapore and overseas (when required)
• Perform calibration of electrical items
• Assist in review and update of department procedures and manuals
• Fulfill other adhoc duties as assigned by Management

Person Specifications

• Possess a degree in Electrical/Power Engineering or 2 years of related experience in Power Generation Engineering and/or Project Management
• Proficient in Microsoft Office applications
• Knowledge in electrical aspects of power systems and control panels

Job Description & Requirements

Responsibilities

· Liaise with authorities, client and consultant to execute the work as per specification and authority’s requirements

· Liaise with engineer and foreman to execute the work as per planning for the project

· Carry out the inspection with RTO/RE as per specification and approved design

· Supervise and coordinate with the subcontractors for the assigned site activities to meet schedule and control the quality of the work

· Supervise the civil & structure work such as Excavation work (open cut and deep), Rock Blasting, Bored Piling work, Sheet piling work, Strutting work, Ground Improvement work, RC and Steel Structure work, Road work

· Coordinate closely with M&E and Architectural work related to structure work.

· Coordinate with SWC (system wide contractors) of LTA for the related to structure work and civil work.

Job Description

• Perform in-house and on-site measurement and data recording as part of the instrument calibration process
• Perform data and certificate processing as part of the instrument calibration process
• Responsible for the proper operation and maintenance of calibration equipment and devices
• Adhere to calibration procedures and methods to meet the professional calibration service standard being delivered by the company
• Function as part of a larger team to meet customer's requirements in a timely and effective manner
• Function as part of a larger team to ensure proper housekeeping and maintenance of the laboratory/working areas
• Assist in the development and extension of new calibration scope

Job Requirement

• Candidate must possess minimum NITEC certificate. Higher NITEC or Diploma in Instrumentation / Engineering or equivalent is an advantage
• Experience in measuring instruments or calibration is an added advantage
• Able to perform calibration work in different customer’s premises when required, as part of the on-site calibration team
• Proficiency in Microsoft Office (Excel) for capturing and processing measurement data
• Willingness to learn/upgrade and commit to meet assigned tasks in a timely manner
• Able to perform some OT when required
• Able to function as a team, and interact with colleagues and customers well
• Proper training will be provided for the expected job scopes
• Entry level candidates are welcomed to apply
• Able to start work immediately or on short notice is preferred

**With regrets, we do not entertain recruitment agency**

ESSENTIAL DUTIES & RESPONSIBILITIES:

• Processes and tracks Submittals to owner, contact subs for items to be submitted
• Processes and tracks formal correspondence with Clients and Subcontractors
• Preparing, scheduling, coordinating and monitoring the assigned engineering projects.
• Interacting daily with the clients to interpret their needs and requirements and representing them in the field.
• Coordinate between clients, site team & factory team
• Request for information, follow up with owner response to sub requesting information
• Keep track of all Extra Work Orders and liaise with Project Admin for costing
• Perform overall quality control of the work (budget, schedule, plans, personnel’s performance) and report regularly on project status
• Assign responsibilities to workers
• Assists Safety Department with inventory maintenance of PPE on site
• Cooperate and communicate effectively with project manager and other project participants to provide assistance and technical support
• Review engineering deliverables and initiate appropriate corrective actions
• Minor transport arrangement
• Familiarity with rules, regulations, best practices and performance standards
• Ability to work with multiple discipline projects

ESSENTIAL JOB QUALIFICATIONS

REQUIRED SKILLS: Advanced Proficiency in MS Office Suite including Word, Excel, and PowerPoint. Sufficient knowledge of design and visualisations software such as AutoCAD, B.Sc degree in Engineering or relevant field

PREFERRED SKILLS: Driving License, Project management and supervision skills, Decision making ability and leadership skills

EDUCATION AND EXPERIENCE: This position requires no years of experience performing work in the role of Project Engineer or similar position. A B.Sc degree in a related field of study is preferred but not required for candidates with proven past work experience.

PHYSICAL DEMANDS: To successfully perform the essential duties of this position, an individual must be able to sit at a desk for 2 or more hours per day, and frequently walk around the site to coordinate, monitor job schedule

LIMITATIONS AND DISCLAIMER: The above job description is meant to describe the general nature and level of work being performed; it is not intended as an exhaustive list of all duties, responsibilities, and required skills for the position. Employees will be required to follow any other job-related instructions and to perform other duties requested by their supervisor.

Requirements are representative of knowledge, skills and/or abilities necessary to perform each duty proficiently. Continued employment remains on an "at-will" basis.

COMPANY DESCRIPTION

REC Group is an international pioneering solar energy company dedicated to empowering consumers with clean, affordable solar power through high-quality solar panels with a leading power density. As Solars Most Trusted, REC is known for its patented innovations and multiple award-winning products with reliable long-term performance. The cornerstone for RECs strong reliability is advanced and highly efficient manufacturing using Industry 4.0 practices. Founded in 1996 in Norway, REC has always been committed to a low carbon footprint in its solar materials and panels. REC is headquartered in Norway with operational headquarters in Singapore and regional hubs in North America, Europe, and Asia-Pacific. As of December 2021, REC is part of Reliance Industries Limited, Indias largest private sector company with revenues of USD 104.6 billion.

Find out more at recgroup.com

RESPONSIBILITIES

We are looking for a proactive, independent and highly adaptive individual to be part of our Global Engineering Expansion team.

The position requires one to be comfortable working in a cleanroom manufacturing environment, have good project management, process and integration skills and mindset for continuous improvement.

Selected candidate will be required to work closely with different stakeholders (Vendors/equipment/technology/operations) to introduce new technology or processes and ensuring its stability after implementation.)

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Key Responsibilities:

SAFETY:

• Perform risk assessments to ensure all measures are taken to prevent injuries or accidents before commencing any work.
• Identify and report any hazard.

Project:

• Initiate and lead projects relating to cost reduction, efficiency/power, and reliability improvements.
• Work with stakeholders from cross functional teams to establish the project timeline, the execution plan and identify the resources required.
• Identify any risk pertaining to safety as well as any potential delay and provide alternative solutions to the issue.
• Ensure the timely completion of key milestones as well as delivery of key project indicators.
• Lead in resolving any quality issues and providing timely updates on the progress.
• Perform data analysis to identify opportunity for improvements or support any ongoing investigations

Benchmarking:

• Familiarize with current market news and trend
• Perform benchmarking studies to understand various vendor and competitor cell performances.

ADDITIONAL RESPONSIBILITIES:

Research:

• Perform research on improvement ideas and carrying out experiments to test hypothesis.

• Degree in Materials / Chemical Engineering
• Knowledge in semiconductor/solar cell and module processes preferred.
• Strong knowledge and experience in process integration & development methods
• Knowledge in PFMEA, DFMEA, DOE, Fish-Bone Analysis,
• Strong technical analysis competency with the use of analytical tools like JMP, Mini-Tab for troubleshooting and datamining
• Ability to work in a fast-paced environment and render support to production as and when needed.
• Strong in organization and project management
• Good communication skill.
• Commitment to get issues resolved and provide updates in a timely manner
• Dynamic & committed with proactive working attitude
• Ability to initiate without being asked
• Challenging spirit to improve current conditions
• Highly effective personal skills communication and organization
• Good Team player
• Well versed in programming to develop advance data mining and analysis capabilities.
• Electrical characterization and physical characterization/ Failure Analysis tools for systematic troubleshooting and improvement.

Today, Lonza is a global leader in life sciences operating across three continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

As a Senior Process Validation Engineer, you will be responsible for leading the execution of PV activities/studies to support the timely and successful validation of new technology transfers into Lonza Singapore production facility and validate changes or continued validation for commercial customers.

The role will lead in the preparation for PV activities (ordering of materials, training) for assigned customer projects per pre-defined schedule and lead investigations into PV related discrepancies and deviations.

Responsibilities

• Lead in the execution of PV activities/studies that validate changes or continued validation for commercial customers, in accordance with approved SOPs / Policies / Regulatory requirements for Lonza Singapore
• Author validation protocols and reports
• Develop Validation Plans and ensure the validation execution activity meets scheduled timelines.
• Participate in review and approval of PV Protocols / Reports. Review minor/ major deviations.
• Provide floor and on-call support and coordination for PV activities being executed on the production floor. Maintain oversight of on-going PV activities on the production floor. Escalate issues to management appropriately and interface with customer on issue resolution. Follow all applicable MFG safety policies.
• Lead in the preparation for PV activities (ordering of materials, training) for assigned customer projects per pre-defined schedule.
• Lead investigations into discrepancies and deviations, author discrepancy reports or minor/major deviations.
• Identify and drive implementation of process improvements as required.
• Lead in the preparation of CPV reports and support preparation of APR.
• Perform work-stages review as required, to support customer BLA filing.
• Support change implementation on site and Manage change control implementation for changes that are driven by PV studies/improvement.
• Participate in inspections and audits by internal QA, customer and regulatory authorities as required.
• Review & assess Site Change Controls, implementation of Validation CAPAs and subsequent closure.
• Represent PV as a team representative in IPT/JPTs.
• Participate in on-job training program for staff and provide guidance to team members as required.
• Any other duties as assigned by your supervisor/manager.

Requirements

• Degree or higher from recognized institution in Engineering/ Science.
• 5 to 7 years’ experience in Validation unit or a related manufacturing environment in the Biopharmaceutical industry.
• Familiar with Regulatory requirements and local Codes & Standards (e.g., FDA, EMEA, GAMP and ICHQ7).
• Good knowledge and experience of the practical and theoretical requirement of validation program in GMP facility.
• Excellent oral and written communication skills, action orientation, and ability to work well in a cross-functional technical environment.
• Exhibit good quality decision making traits.
• Team player who can operate independently, with strong focus on safety, quality and timelines.
• Demonstrated track record in completing projects under tight timelines.

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

• Daily Update of Project/Operation Progress to immediate superior.
• To have and maintain good daily attendance and punctuality.
• To update team member at least 2 working days in advance before going for leave, in order to minimize downtime.
• Supervise and oversee the work of Electricians and Instrument Techs, responsible for training and testing, responsible for maintenance of and compliance with electrical safety program, including LOTO System.
• Must have working knowledge of all applicable electrical industry standards and recommended practices, e.g. NEC, IEEE, ANSI, ISA, NEMA, CP5 etc.
• Must have the knowledge and experience of instrumentation used to control and monitor processes in the chemical processing/Oil & Gas industry.
• Must have hands on knowledge and experience with various types of instrument and electrical systems, equipment and software.
• Experience and ability to manage electrical and instrumentation engineering projects with knowledge of how to establish estimates for VO/Change Order works.
• Managing, allocating resources and ensuring completion of E&I work orders.
• Leading the electricians and instrument techs in finding and executing solutions to E&I problems on site.
• Planning and organization of some non-capital E&I project work, including plant shutdowns/TAR works.
• Able to have understanding the control system architecture and software sufficient to find and modify elements.
• Communicating with Project Engineer/QC engineer to validate and document all changes and highlight to PM for changes that shall involve additional works.
• Nominating and training Instrument/Electrical Techs capable of doing works well.
• Assist to set out detailed works as per the contract drawings, ensuring checks are carried out on a regular basis.
• Ensure that records are accurate and comply with organisational and legal requirements as well as project requirements.
• Resolve any unexpected technical difficulties and other problems that may arise at any time.
• Produce procurement schedules for the jobs and liaise with the procurement department to ensure site have adequate resources to complete the tasks.
• Produce ITP’s with QC Engineer and Task Briefings.
• Produce 2 week look ahead in conjunction with the Site Agent.
• Comply with company procedures and legal obligations.
• Promote and comply with environmental compliance.
• Deliver the works safely and to deadline.
• Promote best practice for Safety , Quality and Productivity.
• Ensure work is delivered defect/snag free.
• Endeavour to spot and highlight value engineering opportunities and innovaive ideas and closely working with CM.
• Coordinate with client and other Contractors for the project interface activities.
• Managing project scope and change control with commerical or without commercial impact.
• Monitor and ensure supervisor plan and instruct and monitor in DWI.
• Update and report daily progress status and lookahead minimum 3days plan with Supervisor.
• To Accurate and timely setting out of the works.
• Timely handover of works and Quality records without outstanding defects.
• Production of accurate records, drawing registers and weekly Reports.
• Must have good relationship with Site team & client technical representative.
• *FRESH GRADUATES ENCOURAGE TO APPLY*

Responsibilities:

· Responsible to provide technical and engineering support and expertise advice to customers (both internal and external) on product / system selection, solutions and other applications knowledge.

· In-charge of new business venture for Green / Renewable Energy esp Hydrogen Refueling Station.

· Work with sales and project team to provide Customers with technical proposals / pre-sales, product demonstrations, technical solutions on product / system to offer.

· Understand the needs and requirements of product / system design improvement and innovation to capture business opportunities.

· Perform research and development to promote product / system innovation and development.

· Evaluate, handle and plan new product / system ideas.

· Identify and resolved solution application issues of Customers.

· Conduct necessary training / briefing to Customers or internal team.

· Other ad hoc duties assigned by Superior

Requirements :

· Minimum a Degree in Mechanical Engineering relevant.

· At least 2 years of relevant working experience in similar industry with hydraulics background is advantageous.

· Good knowledge of using AutoCAD and Solidworks.

· Good command of English.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit/replacement recommendations to clients

5. On-the-job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement/process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of faults/breakdowns and rectification according to authorities/clients' requirements.

9. Perform full set of testing complying with authorities/clients' requirements.

10. Perform maintenance programs and comply to authorities/clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

Roles & Responsibilities

• To engage in project engineering of ACMV Systems.
• Responsible for planning, scheduling, forecasting, conducting and coordinating the technical and management aspects of projects.
• To lead and communicate with our Site Engineer and Site Supervisor.
• Controlling the cost of the materials and labour.
• Attend site meeting, inspection and monitoring of project progress.
• Liaising and coordinating with all parties involved in the projects such as consultants, main contractors, sub-contractors, suppliers, local authorities, environmental agencies and federal entities etc to ensure successful implementation of the project.
• Ensure that all the construction safety rules and regulations are being observed.
• Scheduling the construction work of the day.
• Laying down the preferred construction methods.
• Ensure proper project documentation.
• Monitor and report project progression to management.
• Any other tasks assigned by the management.

Job Requirements

• Min. Degree in Mechanical Engineering or its equivalent
• Min. 3 years of experience in ACMV works.
• A team player and possess problem-solving, coordination and management skills.
• Able to work independently and work as a project team
• Able to carry out prescribed work in a safe, competent or compliant matter.
• Possession of outstanding written and verbal communication skills, as well as having strong interpersonal skills
• Self-motivated individual, with phenomenal confidence working with diverse partner groups
• Able to perform using AutoCad and other drawing applications
• Knowledge in AutoCAD drawings
• Good team player and handle stress and deadlines.

We offer attractive remuneration package to the right candidate.Interested candidates are invited to submit detailed resume stating:-

• Current salary;
• Expected salary;
• Reasons of leaving and
• Date of availability.

Structural Steel Engineer Detailer is responsible for drawing preparation, submission and detailed drawings for steel fabricators and steel erectors, prepares detailed plans, drawings and other documents for the manufacture and erection of steel members used in the construction and monitoring the progresss of fabrication of projects and ensure compliance with construction safety regulations and quality standards, to check the factory workers in safety postition,safety distance,make sure workers are in safe place for producing the work progress

You are responsible for completing end-to-end planning and coordinating all the manufacturing processes for a specific project. Work closely with internal stakeholders regarding manufacturing capabilities, production schedules, and other considerations to ensure that manufacturing can meet cost, quality, and delivery requirements.

Develops, evaluates, and improves manufacturing methods, utilizing knowledge of product design, materials and parts, fabrication processes, tooling, and production equipment capabilities, assembly methods, and quality control standards. Analyzes and plans workforce utilization, space requirements, and workflow, and designs layout of equipment and workspace for maximum efficiency.

Analyze gaps between actual production time and standard time and discuss with Process Engineering for a resolution. Assures product and process quality by designing testing methods; testing finished- product and process capabilities; establishing standards; confirming manufacturing processes and developing cleanroom control and contamination control protocol and ensuring compliance.

Requirements

• Diploma/ Degree in Engineering or Engineering Technology; Industrial or Mechanical preferred

• Minimum of 3 years of experience in the manufacturing engineering field, preferably in a manufacturing assembly environment

• Strong leadership and entrepreneurial abilities

• Good communication and organizational skills

Salary

$2,000 - $4,000 a month

Job type

Full-time

Responsibilities: -

• Provide technical support to Operating Plants for safe & smooth plant operations
• In charge of daily chemical & mechanical processes.
• Initiate and implement plans for performance improvement and economic / capacity optimization
• Perform plant simulation to identify high return opportunities to business team
• Draft process improvement idea with the objectives to improve process / occupational safety, improve product safety / quality, reduce energy consumption, improve production capacity / productivity, and reduce costs.
• Implement Process Improvement idea via Management of Change system and/or Non-regular work system.
• Evaluate process performance and key process parameters from long term view and/or periodically to uncover potential risk that may leads to Plant instability, Safety or Quality issues.
• Troubleshoot plant trouble related to process, perform root cause analysis and propose corrective and preventive measures as process engineering function and/or based on request basis.
• To in charge of equipment calibrations.
• To update production output regularly.
• All other ad-hoc duties as assigned

Requirements: -

• Min Diploma or with min 3 years relevant working experience can be considered as well.
• Competency in Microsoft applications including Word, Excel and Outlook.
• Able to liaise with English and Mandarin speaking customers
• 5.5-days work week.
• Location: Tuas South
• Able to start work immediately
• PR/Singaporean/EP (only)

• Attend discipline engineering meetings to become familiar with design, special issues, etc. and to provide construction input and information when necessary. Attend subcontractor weekly and special meetings as required to monitor status and identify critical issues that may require owner input.
• Assist in developing subcontract requisitions as needed.
• Understand the construction scheduling logic and critical path with focus on the piping work. Monitor subcontractor progress and help EPCM look ahead to future steps necessary to keep construction progress on schedule. Also monitor the progress of Vendor’s personnel and support in solving interface issues will be with the responsible parties.
• Identify critical work and make sure that team is informed of why the work is critical and when the work will be done. This could be technically critical work that must be witnessed (torque of bolted connections) or safety critical work (hazardous lift, work near energized equipment). This is done so that Evonik specific expertise can be brought to bear on the critical issues. Some of the work on the SIMEX project is taking place in a running plant, and these interfaces are critical. Managing or assisting in managing the interface between the project and the running plant will be a considerable portion of the incumbent’s work.
• Review Field Instructions (field changes for subcontractor) for accuracy and get appropriate approvals within Evonik.
• Review and monitor implementation of Piping Inspection and Test Plans (ITPs), witness as needed hold points or critical steps. Check that test and acceptance documentation is in order. See that non-conforming deliveries and workmanship are documented and corrected.
• Support the safety program by participating in safety walks and other safety events. Develop and support alignment between EMSEA and SIMEX safety programs and emergency response plans. Set a good example by following all safety rules and recommendations.
• This is not an exhaustive list of the work that may be required of the person filling this position. For example, the incumbent may assist with commissioning and start up tasks.