• Marine Electrical Equipment (MNC company)
• Basic $3000 - $4000
• *AWS + Bonus + 14 days AL
• Mon-Fri (8.15am-5.45pm)
• Company transport provided: CCK, Bukit Batok, Boon Lay

Responsibilities

• Inspection & Quality Control: Perform incoming and outgoing inspections according to established procedures, including factory routine tests and official tests for switchboards. Ensure that non-conforming products are separated and rejected as necessary.
• Quality Documentation: Maintain quality records and file data. Highlight quality issues to the appropriate management for action.
• Authorization & Release: Authorize the rejection of unsatisfactory parts and the release of conforming parts for storage and customer delivery.
• Customer Satisfaction & Warranty: Ensure the successful testing and commissioning of switchboards on-site or on vessels, and address warranty claims or customer quality complaints.
• Problem Prevention & Solutions: Initiate actions to prevent non-conformities, recommend solutions, and verify their implementation.
• Safety, Calibration & Housekeeping: Follow safety rules, use calibrated instruments for inspections, maintain good housekeeping in the QA department, and assist the manager in meeting quality objectives.

Qualifications

• Min ITE/ Diploma in Electrical Engineering
• At least 2 years of QA experience

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23116143 | Lucky Lee

MKS is committed to being the highest quality and reliability provider of laser-based manufacturing systems for leading electronics and device manufacturers world-wide; helping them to optimize production of the materials, components and systems that are an integral part of the electronic devices in use today.

As part of the mission, we are seeking an experienced Quality Assurance Engineer to work in our Singapore Laser Manufacturing facility in Kaki-Bukit, Singapore who can drive improvements in the quality and reliability of fiber based and solid-state laser products and production processes. This role will have responsibility for developing, maintaining, and improving the Quality control systems and processes for a variety of critical laser systems as well as leading by influence to drive quality within the culture of the organization.

A successful candidate will have a strong work ethic to meet the occasional high intensity workload for customer commitments. A persuasive personality with strong communications skills is needed to influence key cross-functional stakeholders.

Key responsibilities:

• Quality engineering support for manufacturing and project management
• Develop inspection requirements; facilitate PFMEAs; resolve discrepant material issues and create and maintain quality documents such as control plans and inspection plans
• Act as the quality interface for the laser production team in responding to customer complaints using failure analysis, development of corrective and preventative actions and trend analysis
• Conduct audits, including closing out audit findings, create audit finding reports and determine proper corrective and preventative actions
• Coach and mentor Quality Engineers.
• Support validation activity of processes, equipment, and metrology
• Support and comply with the company Quality System, ISO, and requirements
• Establish and maintain quality control processes and procedures for optomechanical components and systems.
• Develop and maintain quality documentation including inspection plan, test protocols, quality control procedures and reports.
• Collaborate with suppliers to ensure their compliance with quality requirements and drive continuous improvements.
• Actively participate in Continuous Improvement Initiatives such as Lean Manufacturing or Six Sigma projects to enhance Quality, efficiency and cost-effectiveness.

Requirements:

• Bachelor’s/Master's Degree in Mechanical, Optical, Optomechanical Engineering or related Engineering Science
• 6 years of experience in engineering in a machining or manufacturing setting
• Experience in Optomechanical design including knowledge of optical principles, components and optical system integration.
• Solid understanding of Mechanical Engineering Principles including Structural analysis, Material selection, Tolerance analysis and Manufacturing Process.
• Knowledge in integrating optical components including alignment, fixture design and calibration procedures.
• Knowledge of quality systems, regulatory requirements, and industry standards
• Advanced knowledge of blueprint reading and GD&T
• Ability to operate a variety of inspection equipments
• Statistical expertise with DOE and Capability Studies
• Design software- CAD (e.g., SolidWorks, AutoCAD), Minitab, Python, Jump etc.
• Strong and thorough knowledge of quality engineering discipline, including:
• Quality data collection and data analysis
• Understanding of statistical methods, including population sampling, hypothesis testing
• Problem Solving techniques such as 8-D, 5-why, Fishbone / Fault tree, PFMEA, K-T

Preferred Qualifications / Competencies:

• Previous Laser or Optics industry experience is highly desired.
• Familiarity with statistical analysis techniques, such as Weibull Analysis and Gage R&R, as well as appropriate software tools, such as Minitab or JMP
• Familiarity with the following areas: Process Validations (IQ, OQ, PQ), Failure Mode and Effect Analysis (FMEA), Structured Problem Solving (8D) and/or Root Cause Analysis - Corrective and Preventive Actions (RCA-CAPA)
• Previous experience with Risk Management, Engineering Change Control, Handling of Deviations and Non-conformances & Lean Six Sigma
• Experience working with cross functional teams (Engineering, Operations, Sales)
• Ability to complete tasks in a timely manner, with excellent attention to detail and accuracy.
• Project Management Experience
• Self-motivated, ability to identify potential problems or improvements and possess the initiative to take appropriate actions as necessary.

• Working days: 5 / 6 days alternate
• Working Hours: 830am-530pm
• Salary: $2000 - $2400
• Working Location : Bedok

Job responsibilities

• Conduct detailed inspections of finished products to identify defects, non-conformities, and deviations from quality standards.
• Support quality in handling defective found during the production
• Collaborate with the quality control team to resolve material quality issues and determine disposition (accept, reject, or rework)
• Collaborate with the production, quality teams to identify root causes of defects and non-conformities
• Perform FA report, and propose process improvements.
• able to use calliper, OGP , Keyence, Drop gauge , micrometre, pin gauge
• able to interpret 2D drawings
• ⁠collect parts for 2 hourly to visual inspection
• ⁠key in data

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

Onshore Quality Assurance/ Tester

1. The scope of Services for the One (1) Onshore Quality Assurance/ Tester shall be as follows:

a) Understand and document business processes, workflow and user story;

b) Perform checks under both functional and non-functional scopes of testing;

c) Review, develop and align test plan, test cases, scenarios and strategies, ensure adherence to quality standards;

d) Perform manual and automated testing using Tricentis TOSCA, including preparing test data when necessary;

e) Develop and maintain automated test scripts;

f) Review, support and participate in functionality and technical testing such as performance testing, security, interface integration and usability testing;

g) Review test reports and results of the Authority’s appointed contractors for the Authority’s systems;

h) Collaborate and coordinate with system stakeholders and Authority’s appointed contractors for testing;

i) Review test process and recommend improvement, which includes analysing test processes and methodologies, identify area for improvement and recommend process optimisations and best practices; and

j) Manage test activities and ensure the planned test activities are completed as scheduled.

2. The One (1) Onshore Quality Assurance/ Tester proposed by the Contractor shall have at least 3 years of experience as a Quality Assurance/ Tester or equivalent position and the following skill sets:

a) Bachelor’s degree in computer science, Computer or Electronics Engineering, Information Technology or related disciplines would be preferred;

b) Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage;

c) Strong analytical skills, meticulous attention to details, good interpersonal skills such as tactfulness, good presentation and listening skills;

d) Experience in the following would be advantageous:

i. Automated testing tools such as Tricentis TOSCA; and

ii. Testing for government public services.

e) Good written and verbal communication and presentation skills, able to interact professionally with all levels of the organisation.

Authorities and Responsibilities

1. Responsible for providing directives for the Quality Assurance Department in meeting management objectives.
2. Formulate, implement and evaluate quality strategies programs for the company.
3. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools.
4. Manage customer complaints, corrective and preventive action programs.
5. Administer and manage continuous improvement program for all QA processes.
6. Work closely with auditors, customers, production and suppliers to meet the quality requirements.
7. Manage sub-contractors for on-time supply of treatment process, as well as meeting technical requirement.
8. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
9. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
10. Review and approve disposition program / action for nonconforming products.
11. Ensure that processes needed for the quality management system are established and implemented.
12. Report to top management on the performance of the quality management system, and note needed improvements.
13. Ensure the promotion of awareness of statutory, regulatory and customer requirements throughout the organization.
14. Ensure and coordinate the implementation of risk assessment and risk control of medical devices

The Quality Assurance Manager plays a crucial role in business by ensuring that products meet certain standards of quality. He/She plans, directs or coordinates quality assurance programs and formulate quality control policies. He/She also works to improve an organisation's efficiency and profitability by reducing waste. He/She prepares and update quality documentation, basing their processes on a recognised standard such as ISO 9000 – Quality Management, published by the International Organisation for Standardisation. He/She supervises teams of inspectors who carry out the detailed assessment of products and their components at different stages of production. He/She recruits and trains supervisors, and provides them with documented quality standards as guidelines for their daily work. He/She also selects quality inspection tools and software to support the inspection team.

Competence Requirements:

• Diploma in Mechanical Engineering / Quality Engineering or equivalent.
• Minimum 6 years of solid experience in Quality Management in similar or related industry and 3 years in management level.
• Good knowledge in implementing and up keeping Quality Management System.
• Strong leadership and good interpersonal skills.
• A team player with strong sense of responsibility to ensure plant effective quality performance.

~ Assist in the implementation of company quality systems.
~ Conduct Quality Assurance audit.
~ Manage cause investigation for non-conformance.
~ Manage company quality systems.
~ Manage departmental activities and deployment.
~ Able to commute between Tuas Plant and Loyang Plant.

Quality Assurance/ Tester shall be as follows:

a) Understand and document business processes, workflow and user story;

b) Perform checks under both functional and non-functional scopes of testing;

c) Review, develop and align test plan, test cases, scenarios and strategies, ensure adherence to quality standards;

d) Perform manual and automated testing using Tricentis TOSCA, including preparing test data when necessary;

e) Develop and maintain automated test scripts;

f) Review, support and participate in functionality and technical testing such as performance testing, security, interface integration and usability testing;

g) Review test reports and results of the Authority’s appointed contractors for the Authority’s systems;

h) Collaborate and coordinate with system stakeholders and Authority’s appointed contractors for testing;

i) Review test process and recommend improvement, which includes analysing test processes and methodologies, identify area for improvement and recommend process optimisations and best practices; and

j) Manage test activities and ensure the planned test activities are completed as scheduled.

Quality Assurance/ Tester proposed by the Contractor shall have at least 3 years of experience as a Quality Assurance/ Tester or equivalent position and the following skill sets:

a) Bachelor’s degree in computer science, Computer or Electronics Engineering, Information Technology or related disciplines would be preferred;

b) Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage;

c) Strong analytical skills, meticulous attention to details, good interpersonal skills such as tactfulness, good presentation and listening skills;

d) Experience in the following would be advantageous:

i. Automated testing tools such as Tricentis TOSCA; and

ii. Testing for government public services.

e) Good written and verbal communication and presentation skills, able to interact professionally with all levels of the organisation.

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

This role is for the validation of Customer technical requirements by means of inspection of In-coming goods and release lots in SAP with defined usage decisions. Testing of ISIR samples (type test) for product approval process (power, control & data cable) with compliance to company standards and verify compliance to the international cable standards e.g. EN / IEC requirements. Understanding of each testing standards and be able to communicate the requirements to respective parties including suppliers. Establish test specification to be followed by suppliers. To be able to operate all laboratory equipment in the process of cable type testing. Keep track of product approvals and Company's approved suppliers’ performance monitoring to ensure continuous product compliance to the intended specification. Corrective and preventive action process with supplier with CAR logging and follow-up for effective closure of complaints and issues related to product quality.

Knowledge in product testing and certification will be an added advantage.

Key Responsibilities:

1. Validate product quality conformance by conducting In-coming inspection and type testing for cable & accessories, include updating into SAP.

2. To be able to operate Laboratory test equipment for cable testing and accessories inspection

3. Understand international cable testing standards and inspection requirements with compliance to internal ISO procedures. Prepare test specification with detailed inspection requirement to be followed by the supplier.

4. Prepare and issue Customer test reports, certificates & COC

5. Track supplier quality by means of in-coming inspection or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined.

6. To generate supplier CAR and track for corrective action and effective closure of CARs by liaising with the supplier.

7. Liaising with relevant departments including suppliers to effectively close the CAR issued for Customer complaints or CAR’s which arise from internal findings (Z2 & Z8).

8. Maintain inspection records in SAP, determine skip lot and setup inspection requirements in SAP.

9. Assist Customer’s Technical enquiries e.g. Customer letter, RoHS, REACH & CE

10. Understand and comply with relevant ISO procedures, work instructions and corporate directives

11. Assist in other day to day activities related to QA department as assigned by superior.

12. Contribute to achieving company, department and personal KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification.

▪ Knowledge in ISO 9001:2015 QMS standard will be added advantage.

▪ To be able to operate lab equipment e.g. calliper, visual scope, resistance checker, High voltage tester etc.

▪ Prior experience in SAP system and knowledge of cable product testing is an added advantage

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Job Summary:

We are seeking an experienced Design Quality Engineer to lead quality initiatives for our thermal cooling solutions in the electronics and computing sectors. The ideal candidate will focus on ensuring design and process quality, driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and cross-functional collaboration, we encourage you to apply.

Key Responsibilities:

• Quality Monitoring & Yield Optimization: Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production.
• Abnormal Quality Management: Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement solutions and preventive actions.
• Process & Quality Control Enhancement: Strengthen internal quality control systems and enhance process capabilities. Lead initiatives aimed at maximizing operational efficiency.
• Customer Quality Assurance: Lead corrective actions for customer-reported quality issues and communicate preventive solutions to stakeholders.
• Inspection Process Optimization: Optimize the quality inspection process by integrating automation and cutting-edge technologies where applicable.
• Cross-Department Collaboration: Promote communication and collaboration between design, production, and other teams to ensure consistent adherence to quality standards.
• Team Leadership: Oversee the quality team’s task assignments, performance, and development, ensuring timely delivery of objectives.

Requirements:

• Bachelor's degree in the related field
• Proven experience in quality engineering, with a focus on manufacturing and design quality.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and industry standards.
• Six Sigma certification or similar is an advantage.
• Able to communicate with Chinese clients
• Willingness to travel and work abroad in China or Vietnam for at least 10 months annually.

HOW TO APPLY:

Interested applicants, please submit your updated resume in PDF/MS Word format to [email protected]

Please state your availability, current & expected salaries for processing purpose.

All applications will be treated in the strictest confidence.

We regret that only shortlisted candidates will be notified.

Tay Bi Hui Avery

Reg no: R23112677

EPS Consultants

95C5630

Mon to Fri 8.30am - 5.30pm

Job Summary

Responsible for management of Asia Quality System, Policies, Programs and Initiatives. Part of the Global Quality Team to maintain global quality system and drive global initiative.

Role and Responsibilities

Quality Systems

1. Supports overall maintenance of quality systems

2. Monitor and reports on the quality performance for Asia Operations such as product quality performance, supplier performance and gaps for continuous improvement to the management team

3. Maintains the Master control and ISO document control system

4. Maintains customer related documents such as Quality Agreement, PPAP

5. Part of the Global Quality Team, to design and implementation of global policies and systems

Quality Policies

6. Ensures effective implementation of all company quality policies

7. Implements ISO and other recognized standards

8. Implements and monitors statistical techniques such as R&R’s to identify opportunities for improvement.

9. Sets, communicates, and implements quality objectives in line with business goals

10. Manage supplier and customer programs (CCAR, ICAR and SCARs) to ensure that complaints are handled effectively and timely.

11. Support and work with different stakeholders on reporting, monitoring and resolution on customer complaints.

12. Support and work with Supply Chain and Operation on supplier quality issues.

Auditing

13. Leads ISO quality standards implementation as Management Representative.

14. Conducts and leads quality audits to specific quality standards.

15. Leads customer related audits

16. Conducts supplier audits

17. Conducts internal audit investigations for product quality and process issues

18. Responsible for ensuring timely resolution to audit findings

Training

19. Provides training for all employees on basic quality and statistical concepts

20. Provides training to appropriate personnel for updates and changes to quality policy

21. Attends relevant external training sessions/courses and shares learning internally

Job Requirements:

• Degree or equivalent experience in a field of study such as chemistry, business, accounting, engineering, etc.

• Certificate in Quality Engineering is preferred.

• Position requires 3-6 years of quality management experience.

• Good experience into customer & supplier audit and able to conduct training

• ISO 13845 experience will be added advantage.

• Demonstrates introductory understanding and ability and with guidance, applies competency in typical situations.

• Able to design quality systems to meet customer expectations and internal needs. New approaches and continuous improvement must be ongoing

• Good interpersonal skills to be able to communicate and collaborate with all stakeholders and deal with situation proactively

• Junior with 1-2 experience in related field can also apply

• Occasionally overseas travel and weekly conference call is required for the role

• This position required to communicate closely with vendors in China.

Job Responsibilities:
- Maintains the Company Integrated Management System, ensuring all business processes are documented, have a designated owner and a plan for their maintenance, aligned to Survitec strategy and associated accreditation and/or regulatory frameworks.

- Perform internal audit procedure and schedule as per Department audit plans, to include the audit Scope, Objective and Criteria. Deliver the audit report including findings; agree on corrective actions with auditees and refer findings to the Manager.

- Investigate non-conformances using current and appropriate methods, systems, and procedures, taking action to solve immediate compliance issues.

- Identifies shortcomings in quality processes or outputs, identifies root cause and works with internal stakeholder to adjust processes or working practices to remove or mitigate any production quality issues; uses established change management programs to address issues and deliver sustained improvements.

- Attend aviation related training and create/refresh and update on internal company aviation training notes.
Conduct internal company training as per aviation requirements.

- Implements systems to ensure compliance with QHSE policies, group and Customer requirements; ensures audit, inspection and risk management are adhered to and embedded throughout the system.

- Document control system management, revision and updating.

- Defines and communicates the processes and schedule for audit, working with colleagues from the Quality function to ensure all supplier, operational, technical, health, safety and environmental audit activity is carried out as planned.

- Leads and participates in quality, non-conformance and customer complaint investigations.

- Provides written reports on audit and investigation findings, implements and monitors CAPA and improvement actions. Ensures findings are reported and escalated appropriately.

- Works with Survitec QHSE colleagues to develop tools and dashboards for the statistical analyses on which recommendations for improvement are based. Ensures outputs from QHSE reporting tools and dashboards are communicated to and understood by the business.

- Inform manager of audit findings and compliance issues, including capability gaps, workflow issues or matters requiring quality development or improvement.

- Any others tasks/projects as assigned by line manager from time to time.


Job Requirements:
- Degree/Diploma in Engineering (preferably Quality Engineering).

- At least 2 years of Quality Assurance experience in Aviation industry.

- Knowledge of ISO 9001, ISO 14001, and TS 16949.

- Proficiency in statistical tools and Microsoft Office.

- Strong analytical, problem-solving, and communication skills
Certified Internal/Lead Auditor (preferred).

- Train the trainer qualification will have added advantage.

We are the makers of possible

BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it’s no small feat. It takes the imagination and passion of all of us—from design and engineering to the manufacturing and marketing of our billions of MedTech products per year—to look at the impossible and find transformative solutions that turn dreams into possibilities.

Why Join Us?

A career at BD means learning and working alongside inspirational leaders and colleagues who are equally passionate and committed to fostering an inclusive, growth-centered, and rewarding culture. You will have the opportunity to help shape the trajectory of BD while leaving a legacy at the same time.

To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you’ll discover a culture in which you can learn, grow and thrive. And find satisfaction in doing your part to make the world a better place.

Become a maker of possible with us!

Job Summary

Plan, co-ordinate and oversee all QA support activities and initiatives in the work cell. To improve process capabilities and product quality to meet the desired targets.

Job Description

• Oversee the product quality from assembly to packaging process and ensure full compliance to the Quality System and regulation requirements.
• Champion data-driven decisions to resolve non-conformances, complaint investigation, CAPA, deviation and other quality matters in a timely manner.
• Interfaces with R&D, unit quality, customer quality engineer to formulate plans and actions to meet product specifications and quality requirements
• Drive quality improvement/automation projects through project planning, scheduling inspection/testing activities, performing analysis and publishing reports.
• Perform test method validation, installation qualification, correlation study for new quality equipment/test method.
• Act as a support role for regulatory, external, internal and/or supplier audits and lead the value stream members to execute the corrective actions for compliance with customer specifications.
• Perform data analysis and trending for product quality performance through monthly and quarterly management review meeting.
• Establish and maintain effective system and procedures to ensure that all manufacturing and engineering documentation are controlled and updated per established regulatory requirements.
• Supervise quality technical specialist and a group of technicians on quality tests and checks.
• Safety & ISO 14001 Environmental accountability: Ensure a safe, healthy and environmentally-friendly workplace by observing Company's rules and procedures. Active involvement in prevention, elimination of potential safety hazards and participation in activities which promotes recycling, replacement and reduction of resource materials.
• Perform any other tasks as assigned.

Preferred Requirements

• Minimum 3 to 5 years relevant working experiences in a quality engineer role.
• Demonstrated good understanding of key elements of Quality Management system, CFR Part 820, ISO 13485.
• Have prior experience in managing quality improvement projects would be an added advantage
• Able to effectively multi-task and work independently with a high level of initiative

Click on apply if this sounds like you!

Becton, Dickinson and Company is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status.

To learn more about BD visit: https://bd.com/careers

Primary Work Location

SGP Tuas - Tuas Plant

· Oversee food preparation method and maintain a consistent standard of products with compliance to SOP at all times

· Monitor and follow up on Central Kitchen’s overall hygiene standards, repairs & maintenance and food security issues

· Responsible for enforcing all hygiene all hygiene/health/safety rules and regulations (in Central Kitchen) in accordance to ISO22000:2018 standards and SFA

· Ensure all storage products (raw, semi and finished) are stored at correct storage conditions, properly labelled and are in FIFO & FEFO system

· Supervise & control storage conditions and truck delivery temperature to all outlets according to Food Safety requirements

· Investigate/handle any complaints regarding our products from outlets or customers

· Conduct food safety & food hygiene meetings and training as and when required

· Supervise stewarding in their daily upkeep of crockery and kitchen cleanliness

· Maintain ISO22000:2018 manual, documents and files by updating and upkeeping of all records

· Any other duties assigned by superior

· Diploma in Food Science with 1-2 years of relevant experience in Central Kitchen Management

Quality Assurance Manager

Job Responsibilities:

Quality Assurance

· Establishment, Maintenance and Continuous Improvement of Company’s Quality Management System (QMS), Class Approvals (Marine) and Regulatory Requirements (Part 145).

· Plan, organise and take lead to drive Quality initiatives and promote quality culture within the company.

· Maintaining and continually improving quality performance, to meet the maintained or all Divisions.

· Perform all essential audits and inspecting internally and/or by third party or client as and when required.

· Establishment, implementation and co-ordination of the audit & approval program, reporting of audit outcomes and ensuring follow up of corrective actions.

· Assist department to follow up on root cause analysis and creation of appropriate action plan to prevent recurrence of issues, by providing training and guidance to the team whenever required.

· Conduct incident investigation and prepare concise investigation reports with in accordance to the regulatory requirement.

· Training and development of employees with respect to QMS and its related processes, quality principles, tools and techniques etc.

· Ensure all licensing at Singapore site and products/services are managed for new applications and renewals.

· Budget allocation and control of costs for QMS related projects; resource management; training; third party audit and Certification costs; and professional subscription costs.

• Effectively implements quality procedures for all allocated sites, in line with legislation, regulatory and guidelines. Documents and maintains the register of quality approvals, procedures and accreditations for allocated sites / geographies.

• Communicates to all allocated sites quality procedures, ensuring all relevant regional colleagues are aware of their responsibilities in supporting / upholding Quality Assurance processes.

• Manages operational, technical, health, safety and environmental audits in line with the audit calendar

• Participates in quality, non-conformance and complaint investigations, ensuring findings are documented, reported and escalated appropriately. Monitors and follows up on supplier CAPA and improvement actions

• Contributes to statistical analyses on which to base recommendations for improvement

• Advises business leaders and senior managers of compliance issues or matters requiring supplier quality development or improvement

• Any ad-hoc duties or projects as assigned.

Skills

• Makes sense of complex, high quantity, and sometimes contradictory information to effectively solve problems

• Gains the confidence and trust of others through honesty, integrity, and authenticity

• Develops and delivers multi-mode communications that convey a clear understanding of the unique needs of different audiences

• Knows the most effective and efficient processes to get things done, with a focus on continuous improvement

• Anticipates and balances the needs of multiple stakeholders

• Uses compelling arguments to gain the support and commitment of others

• Interprets and applies key financial indicators to make better business decisions.

• Plans and prioritises work to meet commitments aligned with goals.

• Operates effectively, even when things are not certain, or the way forward is not clear

• Knows the most effective and efficient processes to get things done, with a focus on continuous improvement

• Builds partnerships and works collaboratively with others to meet shared objectives

Job Requirements:

· Degree in Engineering or Quality Assurance or equivalent with at least 5 years of relevant managerial experience in marine, aviation or related Industry.

· Certified ISO9001:2015 internal/lead auditor qualification.

· Successful completion of the CAAS M10/L11/L12 Examination.

· Able to interpret CMM, in particular IPL (illustrated part listing) and special equipment and tooling listing will have added advantage.

· Preferably have experience in liaising with OEM for capability expansion.

· Certification or experience in Lean, Kaizen and 5S or familiar with common quality tools and techniques.

· Knowledge of relevant standards, and the ability to become conversant with the rules and regulations relating to the quality systems specific to the marine, defence and aviation industries;

· Experience in practical administration, maintenance and development of Quality Management Systems.

· Knowledge of the practical implementation and development of Continuous Improvement and Lean or other similar methodology in a manufacturing, engineering and/or supply chain environment.

· Good leadership and proven managerial skills to be able to lead and motivate the team.

· Meticulous, resourceful, team player and possess strong organization skills.

· Internet savvy and proficient in MS Office applications (ie. Outlook, Excel, Words and Powerpoint etc)

· Effective oral and written communication and interpersonal skills.

· The ability to plan and prioritize work and work under high pressure to tight deadlines yet flexible and adaptable to changing needs and situations.

The Company

At IRVINS, you'll join Singapore's high growth homegrown consumer food brand expanding quickly on the global stage, with 5 offices and 19 markets worldwide, and a product lineup that redefines the food industry.

Founded in 2008, over the years we have pivoted and evolved from an F&B restaurant into a modern food CPG startup. With IRVINS’ global reach, category and market leadership, and startup mentality, we welcome people with a builder attitude keen on building things from scratch and help turn a homegrown brand into Singapore’s iconic global consumer brand.

The Operations Quality Specialist is responsible for ensuring the quality and safety of products in a food manufacturing environment. This role involves monitoring production processes, conducting quality checks, enforcing compliance with regulatory and internal standards, and driving continuous improvement initiatives to enhance product quality and operational efficiency.

Responsibilities:

Quality Assurance & Control:

• Perform routine quality inspections and audits across all stages of the production process, including raw materials, in-process, and finished products.
• Monitor adherence to Good Manufacturing Practices (GMP), Standard Operating Procedures (SOPs), and food safety protocols.
• Review the tests method and analysis using established quality control methods, ensuring products meet defined specifications and standards.
• Responsible for the Batch record review and perform the release of the product. Work closely with production and supply chain team to ensure the market demand is fulfilled.
• Document and report non-conformities and collaborate with relevant teams to implement corrective and preventive actions.
• Support the new product initiative with different stakeholders, ensure the quality of the product is compliance to the product specification
• Managing the equipment calibration used in QC & Production, to ensure the calibration is up to date and maintained.
• Review and manage the GMP audit, to ensure the GMP requirement is maintained and at audit ready status.

Regulatory Compliance:

• Ensure compliance with GFSI standard and regulations (e.g. BRCGS, FDA, HACCP) and company policies.
• Assist in preparing for and participating in regulatory and third-party audits.
• Maintain accurate and up-to-date records for traceability and regulatory purposes.

Process Improvement:

• Identify areas for quality improvement and work closely with production teams to enhance processes.
• Participate in root cause analyses and contribute to continuous improvement initiatives.
• Develop and deliver training sessions for staff on quality standards and food safety practices.

Collaboration & Communication:

• Serve as a liaison between the Quality Assurance and Operations teams to ensure seamless communication and alignment on quality objectives.
• Provide feedback and recommendations to production staff and management on quality-related issues.
• Support new product development and changes in production by evaluating potential quality impacts.

The successful candidate must:

· Responsible for supervision of all site work in cooperation with Project Managers;

· Assist Project Manager in monitoring and managing the day-to-day operations, including site progress, quality, safety, and project cost monitoring;

· Assist to review and develop project schedule with Project Planner for the project detailed construction plan and ensure it complies with customer specifications, engineering deliverables and meet delivery dates;

· Identify any deviations from the agreed scope or premises of the project, assess the impact and ensure remedial action during the construction planning and execution;

· Prepare weekly progress reports inputs and other deliverables of project as required by Project Managers;

· Ensure project quality plan is carried out and in line with audit requirements;

· Assist Project Manager to organise weekly toolbox meeting and housekeeping, respective site operational meetings on related project matters

Requirement:

· At least a Bachelors Degree, preferably in Civil Engineering or related discipline;

· Minimum 5 years relevant local experience in MEP services, E&M systems, Architectural works and Civil and Structural works, preferably in construction industry;

· Able to lead teams and manage effectively;

· Excellent interpersonal and communication skills

Suitable candidates are encouraged to apply this position via Apply Now button or email to [email protected]

Only shortlisted applicants will be notified.

Roles & Responsibilities

• Responsible for carrying out daily pest control activities according to operational schedule
• Monitors and responds to customers’ feedback
• Provides oral and written feedback on work activities
• Uses equipment, chemicals, and pesticide/insecticide products
• Performs any other related duties as instructed by the immediate superior.

Requirements

• Must possess an NEA Vector Control License
• Physical fit to carry out the works.
• Candidates with no experience are welcome to apply

Role:

Construction Manager

Interested applicants can send your resume to [email protected] and allow our Consultants to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

• Singapore Based (Changi Navel, Project Office nearby Lavender MRT)
• Project contract based (estimated 27 months until project completion)
• 5.5 Days work per week (8am to 5pm), Alt Sat Full Day
• Salary: $6000 to $9000 (depends on experience)
• Master or Degree in Engineering or equivalent, recognized universities under the BCA is a plus + Minimum 5 years of Experience in Construction Experience.
• A field in marine construction company is favorable.
• Proficient in Microsoft Office, MS Project, Primavera, and AutoCAD
• Career Progression Opportunities

Our client is a leader in the maritime and construction sectors for over 40 years. They are now looking for motivated individuals to join their team.

Unique Opportunity: Dive into a significant naval base/government project, gaining unique insights and contributing to a project of national importance.

Dual-Domain Expertise: Experience the best of both worlds in land and marine projects, enhancing your skills and versatility in the industry.

Career Growth: Participate in a landmark project that will not only elevate your profile but also open doors to future leadership opportunities.

Impactful Work: Be part of a mission that extends beyond the job – contributing to national security and community well-being.

Be part of building something historic.

Job scope

• Overall Responsibility for all construction activities with respect to performance, procedure, and making recommendations to project managers for improvements and corrective actions.
• Manage Contractors with a focus on quality, compliance with engineering drawings, applicable code and standards, and construction schedule and cost.
• Interface and Coordinate with Engineering supporting construction activities.
• Assist in developing and implementing corporate construction policies that support project construction.
• Oversee the effective management of project activities to assure timely delivery and low wastage.
• Manage and lead a group of engineers.
• Co-ordination with other departments on issues affecting project works.
• Liaise with government/Statutory Authorities, consultants, clients, suppliers etc.
• Provide Timely Project Progress reporting to management and Attending Project Execution Meetings with other managers.
• Select, guide, and develop a multicultural labour force & Management team with construction responsibilities to ensure that the organization achieves it business objectives and complies with all relevant regulations and laws.
• Ensuring Quality Assurance and ISO Standards are met on all construction related activities and ensure customer quality specifications are constantly met.
• Allocate Capital and Human Resources to maximize productivity.
• Other Ad-hoc Duties required to carry out

✅ Wee Yuan Huan
✅ Reg No: R21100383
✅ The Supreme HR Advisory Pte Ltd
✅ EA No: 14C7279

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

Planning Manager (Construction)

• Construction Industry
• Basic $6,000 - $10,000 (commensurate with experience)
• PB
• 5.5 Days; Timing will be dscussed during the interview
• Location: Changi Airport, East Region

Job Responsibilities:

• Report to Project Director (PD) on project functions included but not limited to project management, site management, risk control management etc. to meet the project(s) goals
• Responsible for construction planning, scheduling, baseline programme and tracking of projects progress, as well as co-ordination with consultants, contractor & supplier
• Monitor project development schedule and report site progress according to submitted baseline programme
• Assist PD in collations of project progress reports e.g. Monthly Report, VO Management, EOT Assessment, Project Progress Updates, etc
• To coordinate and liaise with Client’s representatives, relevant Authorities, Consultant, Subcontractors, Suppliers, etc on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation
• Conduct technical reviews to ensure compliance with Contractual requirements and target completion date is met
• To assist Contracts Department on the preparation of tender including drawings, method statements, proposals, programme, and preparation of claims, etc
• Liaise with Client’s Representatives, Consultants and/or Contractors engaged on the
  project and attend regular meetings so as to ensure the progress is on schedule
• Oversee quality control and safety matters on the site and to ensure Environmental,
  Safety & Health (EHS) practices are carried out at all time and identify high risks safety hazard activities before construction and approval of Method Statements
• Be responsible for any other duties that may be assigned from time to time as your
  superior/management deem fit

Job Requirements:

• Degree in Civil Engineering (Recognised by Singapore Professional Engineers Board (PEB)
• At least 5 years of working experience in the Construction Industry

How to apply:

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret only shortlisted candidates will be notified.

Kok Jean Ray
Registration Number: R22110935
EA Licence No: 16C8004 (Elitez Pte Ltd)

Construction Company

Key Responsibilities

• Coordinate project activities
• Prepare project documentation
• Support procurement process by preparing tender documents
• Perform cost analysis, cost control and support Accounts with billing matters.
• Liaise with project engineers and contractors for relevant documentation submission

Job Requirements

• Diploma in Building/Quantity Surveying or prior relevant experience is preferred
• Attention to detail and problem-solving skills
• Ability to work well in a team environment

Others

• 5.5 working days
• Location: Kaki Bukit
• Salary Range: $2.5-3k Neg

Job Description & Requirements:

-Responsible for pre and post contract documentation.
-Responsible for taking off measurement and preparation of tender submission.
-Responsible for handling running project.
-Assist and perform all tasks assigned by respective superior.
-Prepare materials take off for procurement and production
-Evaluation and certification of subcontractor's progress payments and variation claims (include any deduction to be made).
-Involve in project budgeting, finalisation of account with subcontractors and client
-Preparation of monthly progress claim to Consultant.
-Preparation of variation orders for submission
-Able to work independently & Systematic
-Willing to learn attitude with good communication skills
-Proactive, meticulous and able to meet tight deadlines

As a member of the Control & Instrumentation team, you will be responsible for the effective maintenance of control systems and instrumentation in the power plant to achieve high reliability and availability in accordance with statutory, regulatory, and safety requirements.

Responsibilities:

• Ensure maintenance work is executed effectively, efficiently and complied with safety and regulatory requirement.
• Respond and attend to plant failures and forced outages to ensure timely and proper rectification and restoration.
• Plan and ensure safe and timely execution of plant overhaul activities.
• Recommend and implement modification, upgrading and installation plans for plant system and equipment for enhancement, availability and reliability improvement.
• Manage the procurement of parts and services to meet the maintenance needs of the section, including spare parts and external services for routine and breakdown maintenance.
• Lead and manage a team of technical officers and technicians.
• Development of staff.

Requirements:

• Degree in Electronic & Electrical Engineering or equivalent recognised by the Professional Engineers Board.
• Possesses sound knowledge of Control and Instrumentation and good working knowledge of safety and statutory requirements.
• Driven self-starter with strong work ethics.
• Team player with strong analytical, technology and communication skills.
• Is available on standby after office hours for emergency calls.
• Knowledge in cyber security will be advantageous.
• Have a safety mindset and display good workplace safety behaviour.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

• Supervise sub-contractors by selecting and evaluating them as well as monitoring and controlling their performance
• Accomplish project goals by defining scope and purpose of the project, determining required resources, allocating resources, establishing protocols and standards, scheduling staff, resolving design problems, evaluating deadline estimates and adjusting as needed, and implementing change orders
• Meet construction budget by providing capital budget and annual operating information, identifying variances, and monitoring project expenses
• Approve projects by gaining approvals from buyers and performing inspections at critical phases
• Meet operational standards by resolving problems, contributing information to strategic plans, and identifying improvements
• Maintain healthy and safe work environment by enforcing procedures and standards and complying with legal regulations
• Prevent interruptions and fines by enforcing and fulfilling codes

Managing and monitoring daily operations and activities on site.

· coordinating contractors and vendors

· Ensuring all on-site workers adhere to the health and safety regulations

· Implementing industry best practices and safety protocols

· Regularly checking inventory and placing orders for building materials

· Ensuring all equipment are in working order and good condition

· Leadership and management skills to better handle the tasks on site

· Organisation skill and Time management skill

· To communicate with all stakeholders & team members, to relay messages & instructions effectively

· Independent thinker & confident enough to make & execute decisions to solve daily issues

Job Scope:

• Design and develop automated systems and processes to improve efficiency and productivity
• Program and configure automation hardware and software, including PLCs and SCADA systems
• Conduct system testing and troubleshooting to ensure optimal performance
• Collaborate with cross-functional teams to integrate automation solutions into existing systems
• Analyze data and system performance to identify areas for improvement
• Maintain documentation for automation processes, including specifications and user manuals
• Implement safety and quality standards in automated processes
• Provide technical support and training for end-users
• Stay updated on industry trends and emerging technologies in automation
• Participate in project planning and management activities, ensuring timelines and budgets are met

Requirements:

• Diploma or Degree in engineering discipline
• Minimum 3 years of experience in manufacturing industries with an automation background
• Proven track record in automation work is advantageous
• Required hands-on experience and remote support skills

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.