Responsibilities

• Installation, maintenance and repair of surface analysis equipment at customer sites locally and in the region.
• Conduct equipment training for customers and new employees.
• Customer care and provide consultation to the operation and maintenance of the surface analysis equipment.
• Reporting and documentation of service and maintenance work to superiors.
• Any ad hoc duties assigned by Superior.

Requirements

• Min. Dip. in Engineering (Mechanical), Engineering (Electrical/Electronic), Engineering (Mechatronic/Electromechanical), Polytechnic or equivalent
• Preferably Entry Level specialized in Engineering - Mechanical, Electrical, Electronics, Mechanical, Mechatronics, Polytechnic or equivalent
• Fresh graduate are welcome
• No work experience required as on job training will be provided
• A dynamic team player with good working attitude and able to work independently
• Keen to take on new challenges and responsibilities
• Good communication and written skills in English & Chinese (in order to liaise with English & Chinese speaking associates)
• Able to work odd hours and travel overseas in short notice
• Salary range: S$2,500 - S$3,900

Key Responsibilities

Performs standard Tier I procedures including wafer measurement.

Performs preventative maintenance and wet cleans independently. Assists senior engineers with corrective maintenance as needed.

Disassembles, cleans and rebuilds kits as part of kit management quality.

Learns and applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers.

Able to diagnose and resolve basic technical problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Has the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining a neat and orderly work area. Demonstrates a positive attitude in less than optimal customer situations.

Complies with all safety procedures and consistently demonstrates safety as a value.

Other Requirements: This is a physically demanding position that often requires extensive walking, standing for extended periods of time, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting up to 35 lbs., the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position generally involves working in a clean room, it requires the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

​

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information

Customer Service cum Operations Executive (Air & Sea)

Responsibilities:

• Handling Customer’s inquiries and ensure to comply with operation procedures and Preparing quotations and proposals.
• Ensuring company announcements, products, services, rates, policies, and operational changes are communicated to customers on a timely basis.
• Handle Shipment – process documentation, manifest, invoices, cost capturing
• Coordinate with airlines and co-loaders to arrange for space booking
• Coordinate with customers, vendors, carriers, warehouse, and transport sub-contractors, collection of goods with the traffic controller
• Liaison and Attending to Customs, Agents, and Government Authorities enquires
• Ensure full compliance with customs and airport regulations
• Ensures SOP alignment to customer expectations and company's agreed standards of performance.
• Support the Sales Department in quoting, liaising, and following up.
• To promote our service to new clients.
• Handling of permit declaration in timely and accurate handling of all tradenet declarations and submissions.
• Ensure Costing and billing are completed timely and files are closed correctly within a given timeframe.
• Operations to assist and work closely with the warehouse.
• Accomplish any other ad hoc basis work on administrative duties assigned by the Manager.
• Display a high level of professionalism and work ethics

Requirements:

• Experience in freight forwarding will be an added advantage
• Possess sound knowledge of permit declaration would be an added advantage
• Knowledge of CCN/ Customs Regulations will be an added advantage
• Must be able to work towards deadlines and according to SOPs and KPIs.
• Proficient in MS Office and Excel applications.
• Good working attitude, hardworking and able to perform under pressure, and ability to multi-task
• Team player and able to work independently with minimal supervision
• Applicants should have full working rights in Singapore

Be part of an established, exciting and expanding Group of F&B company with multiple brands and concepts. Eatz Catering Services Pte Ltd is a Halal-Certified Full-Service Caterer since 2005.

The job scope of a Sales Consultant typically includes providing administrative support to the Sales departments. Some of the key responsibilities includes:

• Build rapport and communicate well with clients and answer all incoming queries (online, phone enquiries, etc)
• Assist to check and update orders into the system
• Plan and Create Sales quotations / confirmation orders in a timely fashion.
• Assist to update keying in of data in the ERP system
• Assist and ensure that all orders are prepared accurately to ensure 100% delivery success rate for all customers
• Administrative work to assist the team (Admin)
• Any other duties assigned by the Directors

Requirements:

• Min 2 year of experience.
• Good Command of MS Word & MS Outlook
• Strong, Good & Strategic Team Player yet able to work Independently
• Good Interpersonal skills
• Must be Meticulous & Always Accurate for all work done
• Quick-Thinking, Versatility to be able to Solve Problems
• Highly-Motivated & Experience in F&B Industry would be an advantage
• Ability to start ASAP would be an advantage

Job Info

• Attractive Salary Package - commensurate to work experience and qualifications
• Work in a Pleasant Working Environment
• Work Location: Bedok (take 17A from Bedok MRT – 2nd last stop)
• Staff lunch provided

Please email your updated resume to [email protected] AND WhatsApp to 9857-9292 for faster response with:

• Last & Expected Renumeration
• Earliest Availability for Interview & Commencement of Work
• Vaccination Status / COVID History

Thank you for your attention. We regret to inform that only Shortlisted and Successful Candidates will be contacted. Remuneration offered shall be commensurate with qualifications and relevant experience.

Location: East

Mon to Fri 8am to 5pm

Salary: $2200 to $2800 depends on experience

Work life balance-Go back home on time

Training provided

Job Description

• Supporting role for Sales team.
• Processing purchase orders and expediting delivery schedules
• Interact, engage and/or respond directly to customers’ needs & requirements.
• Occasionally required to visit valued customers along with our sales persons to co-address critical business related issues such as ordering management, forecasting, pricing and so forth.

Requirements

• Able to communicate in both Mandarin and English fluently to liaise with customers
• Cheerful personality
• Able to start work immediately
• Fresh/Entry level welcome as training provided

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Job Responsibilities:

• Assisting coordinators with the proper arrangements of jobs for technicians
• Provide support on the technical issues faced by the technicians on site
• Ensure all tasks in CRM assigned to be settled and arranged
• Monitor the progress of the repair jobs in the workshop and coordinate closely with the service coordinator and CSS
• Coordinate closely with the shipping department to ensure proper storage arrangement of trucks in the warehouse
• Guide the new FSTs during the probation in the workshop
• Monitor and track the ETA of the replacement parts of the cannibalized trucks
• Oversee battery regeneration and manage the used battery and charger stock
• Manage and schedule all the work orders issued by the sales team
• Manage and improve the module repair process.
• Ensure safety and 5S of the workshop

Job Requirements:

• Min a diploma holder
• At leats 5 years of relevant experience
• Valid class 3 driving license is a MUST
• Valid forklift operator certification
• Proven experience in delivering training in a warehouse or industrial setting
• Excellent knowledge of forklift operation and safety guidelines
• Strong communication and interpersonal skills
• Ability to work independently and lead a team of technicians
• Must be organized and detail oriented
• Flexible schedule, including availability to work weekends or evenings as needed
• Willing to work 5.5 day work week
• Proficiency in CRM systems
• Proficiency in MS Office applications
• Willing to work at Loyang Way

Summary

The Customer Services Officer is responsible for the management of customer requests and for providing assistance to customers at check-in counters. He/she manages flight requests, verifies travel documents and works with other departments to resolve customer issues. To maintain a safe working environment, he/she ensures his/her team adheres to all safety and/or security standards and escalates safety breaches to supervisors and authorities.

The Customer Services Officer demonstrates professional behaviour when responding to passenger complaints and acts as a service ambassador for the organisation. He/she works in shifts to accommodate round-the-clock flight arrivals and departures and is physically strong to assist passengers with lifting of their baggage. Moreover, he/she is detail-oriented, possesses excellent customer service and communication skills and handles passengers with special needs effectively.

Duties and Responsibilities

1) Provide quality customer services

· Manage and control flight requests such as seat selections and meal arrangements

· Service customers at the first-class and premium check-in counters

· Ensure all travel documents, passports and/or visas comply with verification requirements

· Manage and control discrepancies at the gates

· Handle complex customer requests

· Handle complex customer issues regarding irregular flight operations

· Generate finalised passenger manifests Resolve complex service requests regarding automated check-in systems

2) Uphold safety and/or security standards

· Interpret and follow safety and/or security standards for teams in the workplace

· Escalate reports of breaches in safety and/or security standards to relevant authorities

3) Influence organisational development

· Provide on-the-job training to team members on day-to-day tasks

· Act as mentor to team members

Requirements

▪ Minimum GCE 5 “N” levels and above

▪ Minimum 2 years’ experience in passenger handling or equivalent experience

Location: East

Mon to Fri 8am to 5pm

Salary: $2500 to $3000 depends on experience

Work life balance-Go back home on time

Training provided

Job Description

• Supporting role for Sales team.
• Processing purchase orders and expediting delivery schedules
• Interact, engage and/or respond directly to customers’ needs & requirements.
• Occasionally required to visit valued customers along with our sales persons to co-address critical business related issues such as ordering management, forecasting, pricing and so forth.

Requirements

• Able to communicate in both Mandarin and English fluently to liaise with customers
• Cheerful personality
• Able to start work immediately
• Fresh/Entry level welcome as training provided

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Job Description

The successful candidate will join the Application Services (Passenger Servicing System) department in SIA Information Technology Division. He/She will be assigned to assist various Customer Service agile squads, as required, to accelerate new product and feature development.

Key Responsibilities include:

- Initiate design and development of new applications.

- Design and implement Continuous Integration / Continuous Delivery pipelines.

- Design and develop new features for both new and existing applications.

- Deliver and integrate Microservices with web and mobile applications.

- Provide technical input to assist product owners to and refine user stories.

- Create and maintain software documentation, including detailed technical design, low level design and test scripts.

- Write automated unit, feature and regression test suites.

- Ensure code upholds the best practices for security, data protection and reliability.

- Any relevant ad-hoc duties.

Requirements

- Possess a degree in Information Technology or related fields.

- At least 3 years of broad range of software development experience.

- Strong Java experience for server side development, including hands on experience developing and consuming Restful API’s and webservices.

- End to End integration experience of Microservices / webservices with front end systems (websites, mobile etc.).

- Good understanding of agile methodology and design thinking as well as source code control systems and CI/CD pipelines.

- Familiar with programming practices such as Test Driven Development.

- Experience with SQL and relational and non-relational Databases (e.g. Oracle, MySQL, Cassandra).

- Experience with programming languages such as XML, JSON, HTML, HTML5, CSS, JavaScript.

The following will be highly regarded:

- Experience in designing, developing and deploying microservices - Experience in building highly available, performant and scalable clustered services using Docker, Kubernetes or Open Shift.
- Experience in node.js development.
- Experience in deploying with cloud based services and deployments, such as AWS, Azure or Google Cloud.
- Experience with web front end framework such as React, Vue or Angular.
- A proven ability to adapt to new development languages and environments.

Location: East

Mon to Fri 8am to 5pm

Salary: $2500 to $3000 depends on experience

Work life balance-Go back home on time

Training provided

Job Description

• Supporting role for Sales team.
• Processing purchase orders and expediting delivery schedules
• Interact, engage and/or respond directly to customers’ needs & requirements.
• Occasionally required to visit valued customers along with our sales persons to co-address critical business related issues such as ordering management, forecasting, pricing and so forth.

Requirements

• Able to communicate in both Mandarin and English fluently to liaise with customers
• Cheerful personality
• Able to start work immediately
• Fresh/Entry level welcome as training provided

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Responsibilities:

• Manage cases in line with the key directive of Assist First, Verify Later
• Demonstrate a “can do” and professional attitude when servicing members and clients with the objective of exceeding expectations with the service provided
• Demonstrate an understanding of all key clients’ Operations and Billings Procedures
• Coordinate cases in an efficient and cost effective manner in accordance with company policies and procedures
• Manage cases with a view to moving them forward in the best interests of the member and client
• Work harmoniously with fellow operations staff, members of the medical team and other Assistance Centres in the provision of assistance to members and clients.
• To be the first point of contact for members, end users, clients, service providers and colleagues
• Ensure incoming calls are answered promptly, appropriately and courteously.
• Ensure inbound requests are handled in timely efficient manner
• To manage an allocated load of cases within the shift and ensure that it is communicated appropriately and efficiently in the transmission handover
• Ensure that sufficient logistic arrangements are made in timely and appropriate manner to meet the needs of members and clients.
• Escalate cases and requests as per company protocols
• Ensure continuity of service delivery by answering all requests for assistance in a timely and professional manner.
• Organise the full range of medical and security services for clients, utilising the internal resources of International SOS and external correspondents where necessary
• Work harmoniously with fellow operations staff, members of the medical team and other Assistance Centres in the provision of assistance to members.
• Positively promote International SOS to other organisations.
• Carry out any other reasonable duties as requested by the manager.

Requirements:

• Diploma or equivalent
• Min 3 years working experience
• Experience in call centers, assistance companies and/or hospitality industry an advantage

Job descriptions:

• Welcome customers as they come into the restaurant
• Help customers to settle down and also take their orders
• Process customers’ orders and generate their bills
• Provide answers to queries presented by clients regarding services and offers made available by the restaurant
• Clean all tables after clients have left and get such tables prepared for the next set of clients
• Serve and pack warm foods to clients in an effective manner and in strict accordance to the orders of such clients
• Assist kitchen staff and outdoor delivery staff whenever such assistance is required
• Maintain chart of all available deals and products periodically and refresh such chart on daily basis.

Requirements:

• Mini 3 years of working experience.
• Possess complete information regarding all approved hygiene policy and standards
• Ability to maintain composure during rush hours
• Ability to present bills, take orders and deliver them to clients in a timely manner
• Possess willingness to assist kitchen staff
• Ability to deliver top quality customer service and assistance
• Ability to work overtime.

C&B:

• Basic Salary + Monthly Allowances
• AWS
• Annual Salary Increment
• Annual External Training Budget with Paid Training Leave Given
• Excellent Welfare Benefits; Flexi Claims, Progressive Annual Leave & etc
• Permanent position with Long Service Award

Responsibilities:

• Perform daily order processing from customers' requests (from quotation to processing orders)
• Coordinator with outbound processing to Schedule, Liaise Internally, Manage and Resolve with any matters with customers' finished goods
• Coordinate with the various department to ensure smooth operation (required face to face communicate with the production staffs)
• Handle customers face to face regarding ordering or outbound matters.
• Beneficial to have basic accounting knowledge for processing of payment etc.
• Perform any administration duties assigned when required
• Responding to incoming email, phone, mobile platform enquiries
• Be responsible for all correspondences, filing, photocopying, recording, documentation
• Attending team meeting and sharing best practice with colleagues
• Prefer to have candidates with experiences working in Singapore

Requirements:

• Minimum GCE 'N'/'O' level with related working experiences
• Applicant with either similar job duties will have advantages
• Comfortable to work in different multicultural team
• Possess positive working attitude and willingness to learn
• Possess good communication skills (both written and oral) and interpersonal skills as required to handle customers enquiries daily
• Ability to maintain confidentiality
• Able to accept job flexibility and willingness to learn new duties
• Ability to start work with short notice preferred
• Applicants must be willing to work in Changi (Preferably for applicants to stay in East area)
• 5.5days work week with alternate Saturday
• Mon - Fri (8am to 5.30pm); Alternate Sat (8am to 4pm)

For interested candidates, please submit your application to us with your resume stating your contact details, experiences, current and expected salary via APPLY NOW button.

(Only shortlisted candidates will be notified)

Responsibilities:

• Process quotations, purchase orders and sales orders.
• Coordinate with customers, vendors and engineers on delivery lead time.
• Manage Customer Consignment Program.
• Work closely with customers, vendors and engineers to ensure timely deliveries to meet customers’ requirements.
• Manage, negotiate & monitor on-time deliveries to customers.
• Maintain stocks inventory and update price book.
• Maintain an effective filing system for all documents.
• Attending to enquiries from customers and business partners.
• Build and maintain a good customer relationship.
• Prepare weekly delivery report and monthly stock analysis report.
• Liaise and coordinate with internal departments on delivery/ collection.
• Handle internal/ external customer/ vendors queries.
• Cooperate with respective departments to coordinate logistics activities.
• Any other ad-hoc tasks assigned by Supervisor or Manager.

Requirements:

1. Higher NITEC or Diploma or its equivalent
2. Good understanding of customer account management
3. Good verbal and written communication skills, able to communicate with people at all levels
4. Friendly and Customer Service Driven
5. Proficiency in MS Office knowledge and ERP system Dynamics 365 Business Central
6. Good interpersonal skills to engage with all levels in the Company
7. Minimum 2 or 3 years of experiences in Logistics operation

Mizuno places a strong emphasis on Fair Play, Friendship, and Fighting Spirit, aiming to cultivate an environment where every employee embrace fairness and fighting spirit. We seek to attract adaptable, proactive, and passionate talent to join our team.

As a Sales Operations and Customer Service Specialist/ Executive, your role is pivotal in leading and developing our Customer Service division. You will drive enhanced customer satisfaction through competitive service levels, meeting and exceeding our customers' expectations. Your primary objective is to provide order management and support to the Sales Team, aiming to achieve the organization's sales and profit targets while meeting team objectives.

Key Responsibilities:

• Lead the management of the sales order process, including sales order collection, reservation, and confirmation.
• Ensure proper administration, documentation, and financial reconciliation of the customer base.
• Co-lead with Ops and Finance the product delivery process to achieve our customer commitments.
• Collaborate on capacity planning with the warehouse.
• Work with the Sales team to develop strategies to close gaps.
• Communicate cross-functionally between internal interfaces and work closely with the warehouse team to provide the best support for the business.
• Generate and compile inventory data to maintain healthy stock levels.
• Track and analyze monthly sales of customers and product categories.
• Monitor and track incoming shipments as per the Open Order Report, including bulk and sample orders.
• Monitor article drops, and shipment tracking, and ensure all pre-orders are fulfilled.
• Adjust the order book according to delivery information and inform customers and the sales team of any delays.
• Deliver reliability and responsiveness to customer requests and complaints.
• Process stock replenishment in SP & FO and support in all PO creations for non-trade purchases, ensuring submission to Finance.

Knowledge, Skills, and Abilities:

• Strong communication skills.
• Ability to manage relationships and diversity.
• Excellent planning, organizing, and coordinating skills.
• Proficiency in analysis and problem-solving.
• Results-oriented mindset.
• Data entry and computer skills.

Education and Experience / Minimum Qualifications:

• 3 years' experience in Order Management, Inventory Management, and Customer Service.
• Industry Experience – Preferably in retail or FMCG Retail.
• Language: Fluent in English + Local Language (if applicable).
• IT: Proficiency in Microsoft Outlook, Microsoft Excel (Advanced), Sun System/ SAP experience is a plus.
• Mature, responsible, proactive, and a team player.

#BeMore

Do you aspire for a rewarding career that lets you do more and achieve more? Unleash your full potential at work with TDCX, an award-winning and fast-growing BPO company.

Work with the world’s most loved brands and be with awesome, diverse people. Be home, belong, and start your journey to #BeMore!

Top reasons to work with TDCX

• Attractive remuneration, great perks, and performance incentives
• Comprehensive medical, insurance, or social security coverage
• World-class workspaces
• Engaging activities and recognition programs
• Strong learning and development plans for your career growth
• Positive culture for you to #BeMore at work
• Easy to locate area with direct access to public transport
• Flexible working arrangements
• Be coached and mentored by experts in your field
• Join a global company, winner of hundreds of industry awards

What is your mission?

You’ll help us deliver excellent service to our partner brands by performing these tasks:

• Handle phone call enquiries of current and prospective members in respect to Airline industry programme.
• Provide accurate and efficient processing of reservations or support work relating to mileage redemption, issuing of tickets and effecting changes to schedules.
• Maintain member accounts whenever there are changes in their profiles.
• Advise on latest promotions and mechanics including send programme related collaterals and forms.
• Manages feedback/ complaints and liaise with backend support to resolve members’ issues.
• Meet daily KPI requirement.
• Perform other duties and responsibilities that may be assigned to you by the management within your category of employment in the organization and for the effective implementation, maintenance and continual improvement of the Quality Management System of TDCX.

Who are we looking for?

• Candidate must possess at least a GCE ‘O’ levels in any field.
• Preferably with 1 year of working experience in contact centre is ideal for this position. However, fresh graduates are encouraged to apply.
• Strong time management skills and amenable to work rotating shifts.
• Exposure to strong customer-orientated environment is an added advantage.
• Possess strong analytical skills to identify cause of problems & recommend solutions.
• Comfortable working with computers and multiple systems.
• Excellent verbal and written communication skills in English and the language of the supporting market.

Who is TDCX?

TDCX (NYSE: TDCX) provides transformative digital CX solutions, enabling world-leading and disruptive brands to acquire new customers, build customer loyalty, and protect their online communities.

TDCX helps clients, including many of the world’s best brands, achieve their customer experience aspirations by harnessing technology, human intelligence, and our global footprint. We serve clients in fintech, gaming, technology, home sharing and travel, digital advertising and social media, streaming, and e-commerce. Our expertise and strong footprint in Asia have made us a trusted partner for clients, particularly high-growth, new economy companies looking to tap the region’s growth potential.

We pride ourselves on discovering and employing the best professionals to join us as we transform the outsourced CX industry. Our commitment to #BeMore for our people, our clients, and our community has led to us winning several hundreds of industry awards, including being one of the best companies to work for in Asia.

From our first-rate workspaces, above-industry-average compensation packages, career opportunities, to our workplace perks, find out what else is in store when you embark on a career with TDCX.

Job Description

Successful candidate will be supporting the sales team with rates and shipment bookings. Job is administrative

Job Scope

• Attending to client enquires and needs.
• Collaborating with team members in providing appropriate freight solutions.
Following through, executing and reviewing freight jobs.
• Maintaining strong relations between industry players and stakeholders.
• Refining and the process along the way, working towards a win-win solution for both clients and company. 


Requirements:

Minimum GCE ‘O’ Level

Good working knowledge of MS Office applications (Excel, Word, PowerPoint, Outlook)

Good communication and interpersonal skills

Service orientated with good initiative

Able to commit for overtime when required

Experience not required as On Job Training will be provided

Benefits:

· Working Hours:

Monday to Friday: 10.00am to 6.00pm

Sat.: 9.00am to 1.00pm (Alternate Sat, Work from Home)

· Attractive Remuneration Package (Basic, Performance Bonuses)

· Career Advancement

· Training Opportunities

· Medical and Insurance Coverage

[What you will be working on]

You will be required to:

• Lead and supervise a team of support staff in day-to-day operations, key systems and customer service touch-points (Counter, Call Centre and Email), and any new touch-points created
• Execute daily work at assigned touchpoint(s) through understanding of customer service policies, work processes and use of systems (e.g. Telephony, Customer Relationship Management, Queue Management, etc.)
• Attend to customer feedback, complaints and compliments
• Coordinate and liaise with various stakeholders (internal/external) for intakes and support department projects and prepare related reports for submission.
• Help manage the social media platforms and QSM system.
• Assist and support any other projects/events/duties as assigned within the department

[What we are looking for]

• You should be a team player with at least three years’ experience in the service industry
• You should be IT Savvy with a knowledge of CRM systems, have an affinity for learning, exploring and applying technological and digital solutions to the workplace
• You should also have proven administrative and organisational skills, as well as excellent interpersonal, written and oral communication skills
• You should be able to lead/supervise a team of support/counter staff

Applicants may check their application status at the end of 8 weeks from the closing date of this job posting.

• Process export orders and coordinate shipments with customers, transporters and warehouse according to established systems and processes.
• Serve as liaison providing shipping details to the customer whereby advising appropriate individuals of order changes as they occur.
• Ascertain accurate and timely data processing into the freight solutions system.
• Identify problems, consider alternative solutions, and make recommendations for action. Provide support/service to customers as well as keeping those affected by the decisions up-to-date.
• Ensures high quality customer service and engagement by frequently interacting with external customers through phone, mail and sales call.
• Maintains close working relationship across Business Development units and drives opportunity development of accounts.
• To streamline existing processes to increase operational productivity.
• Provide support on data and statistical reporting required by the Management through systems and applications.
• To assist in any other administrative duties as assigned by the Management from time to time.

Brief description of the Restaurant

New opening Japanese Yo-shoku restaurant. Around 80 pax of capacity.

Job Descriptions

• Handle restaurant operations
• Lead and guide a team of Servers/Kitchen
• Handle preparation and ensure high quality and company standards\
• Provide excellent service experience to all customers/and provide a training to all staff
• Handle all customer queries and feedback in a professional and timely manner
• Ensure compliance to food safety, hygiene and sanitation standards according to statutory guidelines
• Ensure that policies and standard operating procedures are strictly adhered to
• Guide and monitor work performance of all staff
• Handle and manage all sales figure including FL Cost /Sales

Job Requirements

• Graduated at least Secondary school
• Report to the Japanese directors
• At least 5 years of relevant working experiencese)
• Quality-driven,Can do attitude and customer-oriented mind-set
• Ability to work in a fast-paced environment and manage multiple-task

Benefit

• New Opening Outlet
• Big room for career progression since they are planning to expand more.
• Annual Leave
• Medical Leave
• Uniform will be provided
• Yearly Bonus*depends on business situation/performance
• Staff Discounts
• Transportation allowance under certain conditions
• Following by MOM Part IV of the Employment Act
• *We will do training in TOKYO/JAPAN, let’s joint us!!

Working hours

Working Hour/Standard Condition：

• 7:30-23:30(as Rotating Shift)
• 5days per week (able to work on weekends and public holidays)/principal

Responsibilities

MRO Operation Support

· Function as key engineering focal to provide technical advice on workscope management, repair dispositions, engineering repair quotes and technical support to Operations, Quality and Customers in meeting airworthiness and customer requirements.

· Support operations to perform repair assessment on nacelle components metallic and composite structures.

· Support communication with OEM on technical issues and component repair assessment.

· Prepare repair packages with detailed repair drawing, stress analysis and submission for airworthiness approvals.

· Perform basic design activities for tooling aid and assembly jig fixtures, coordination with vendor for fabrication and calibration.

· Support new repair capability development, system setup and airworthiness application.

· Support Quality reviews and investigations to enhance and improve engineering and operational processes.

· Identify, support, drive engineering and shop cost reduction and continuous improvement opportunities.

· Develop and conduct Engineering, Component and Product training to Operations Team.

Continuous Improvement

· Identification of new digitalization and I4.0 opportunities for technology introduction and automation into MRO operation

· Design simple RPA, with user guide to implement the process automation applications

Requirements

Education & Experience

· Degree / Master Degree in Mechanical Engineering / Aerospace Engineering or equivalent

· Fresh graduates are welcome. 3-7 years’ relevant experience is added advantage.

· Engineering trained, good team player, self-motivated, fast learner, good communication skill, and good authoring / literature composing.

· SMART Factory, Industry 4.0 experience & knowledge will be considered as added merits.

o Experience on new technology application

o Interest in digital database, data analytics. Programming skill – python, C#...visual studio…

Robot / Cobot application and integration

Skills

· Excellent computer skills – O365, Microsoft Visio, MathCad. Nastran and Patran, CATIA V5 is added advantage.

· Python or other programming language and software development is added advantage.

· Equipment troubleshooting skills such as debug or troubleshoot an existing system.

· Excellent Communication and presenting skills, able to clearly explain novel and complex ideas to stakeholders of all levels and within multidisciplinary teams.

· Excellent written communication skills for record keeping and documentation.

· Problem solving and creative thinking to troubleshoot problems as they arise and find effective solutions.

· Planning skills to detail project timeline, prioritize workload and keep accurate documentation.

· Flexibility & Adaptability –able to keep up with latest techniques and technologies as they develop.

Pls email your resume to [email protected]

Responsibilities

MRO Operation Support

· Design and create tooling drawing to support MRO activities. Tooling includes assembly jigs, ground support equipment, shop tooling aids, machining fixtures, handling tools, etc.

· Create drawing and guidelines for tooling set-up and utilization.

· Liaise with internal and external machining facilities for tooling fabrication.

· Engage and coordinate with operation teams to ensure all MRO tools are well organized and good conditions. Ensure safe working practices.

· Trouble-shoot, provide engineering solutions and improvements for tooling technical problems.

· Support tooling periodical calibration for assembly jigs, load testing etc. Maintain and update calibration records.

· Support quality investigation, continuous improvement and innovation development.

Requirements

Education & Experience

· Degree in Mechanical/Manufacturing/Design Engineering. OR

· Diploma holder with 4-6 years working experience in Manufacturing and/or Tooling Design will be considered.

Skills

· Knowledge in machining and rapid prototyping would be beneficial

· Ability to interpret technical drawings, geometric dimensioning, and tolerance.

· Ability to use various measurement instruments.

· Proficient in MS Office and CATIA V5 applications

· Use of laser trackers for tooling calibration is added advantage

· Independent, self-motivated and able to work in a fast paced environment

· A team player with a positive attitude and keen interest to learn

· Good interpersonal and communication skills

Ability to multi-task, prioritize and manage time effectively.

Pls send your resume to [email protected]

Responsibilities

The Environmental, Health and Safety (EHS) Engineer is responsible for developing, implementing, and continually improving company’s safety and health programs and procedures to ensure personnel and plant wide Health and Safety. This individual is required to monitor and conduct EHS audits to identify level of implementation & effectiveness of EHS management system, identify & recommend measures/approaches to close gaps/improve the management system. He/she will also be liaising with inter-departments and external organizations on EHS compliance issues.

• Supports site's compliance with WSH Regulations.
• Develop and enforce EHS programs, procedures, reports, permits and training as well as to cultivate & promote EHS Safety Culture within the organization
• Manage and lead in the monitoring and controlling of safety standards in accordance with local regulations code of practice and RTX Corporate EHS requirement.
• Manage Management Of Change (MOC) program for timely closure.
• Monitor and track timely completion of activities, initiatives and action items in Corporate SMART Reporting System, while supporting PDPR Dashboard Reporting.
• Drive effective Waste Management.
• Manage and maintain the facilities to ensure compliant with local EHS regulations.
• Develops environmental regulatory reports and submissions to achieve and maintain standard documentation.
• Ensure organization meets all legal licensing requirements with regards to occupational health and safety.
• Lead and conduct safety inspections
• Develop and conduct inspection & audit program by identifying root causes of deficiencies and completion of preventive and corrective actions.
• Establish & lead trend analysis, audits, accident investigations and site inspections of operational procedures, facility design, equipment and materials.
• Evaluates new hazardous materials to ensure compliance to all safety rules and regulations pertaining to the work are conscientiously observed & in compliance.
• Drive deployment of corporate programs independently.
• Oversee Industrial Hygiene Screening for site personnel.
• Leverage continuous improvement processes and tools (CORE) to improve EHS & Facilities performance
• Drive & champion Behavior Based Safety System.
• Conduct trainings to educate organization of best practices and regulatory/corporate requirements when necessary.
• Assist in coordinating with IFM in facilities maintenance and building services.
• Manage site security and access system, ensuring security and emergency preparedness procedures are implemented properly.

Requirements:

• Degree in Safety, Health & Environmental Engineering.
• Specialist Diploma in Occupational Health & Industrial Hygiene is a plus.
• Minimum 3 years’ experience in the EHS profession. Fresh graduates will be considered for the role.
• Experience in planning, development and implementation of EHS management systems and compliance
• programs.
• Lead and drive hazard identification and risk assessment methodology.
• Good knowledge of local legislation (eg. WSH/NEA/SCDF), BIZSAFE, ISO 14001 & 45001 requirements.
• Fire Safety Manager and/or WSHO is an added advantage.
• Analytical, meticulous, resourceful and able to meet tight deadlines in a fast-paced work environment.
• A team player with good communication, interpersonal and organising skills.

Job Responsibilities

• Perform equipment inspections to identify potential problems and safety concerns
• Perform diagnostic troubleshooting and failure analysis on all components and systems of the equipment.
• Isolates equipment malfunctions.
• Replace and/or repair faulty components and systems on equipment.
• Perform corrective and preventive maintenance to ensure that equipment continues to run according to manufacturer's specifications
• Maintain parts and supplies needed for job completion
• Maintain company vehicle cleanliness and ensure vehicle is in safe operating condition
• Maintain a culture of safety & participate in all safety meetings
• Responsible for properly and accurately filling out all job cards in service CRM
• Responsible for maintaining a clean and safe work area
• Responsible for maintaining all tools are in safe working conditions
• Picks up parts and performs other tasks as assigned
• Return un-use parts to the service coordinator/CSS
• Return faulty parts to the workshop team leader
• Complete basic and advanced technical training as assigned

Job Requirements

• Min ITE graduates in Automotive Engineering
• Min 2 years of relevant experience
• ITE graduates with no experience are welcome to apply
• Possesses class 3 driving license
• Able to read and understand electrical and hydraulic schematics
• Familiar with hand and power tool operation
• Have experience in handling electrical/electronic systems and hydraulics and internal combustion engines
• Basic knowledge and ability to use desktop and mobile PCs
• Willing to work at Loyang
• Willing to work for 5.5 day work week

SERVICE TECHNICIAN (HOME APPLIANCES)

$1,900 to $2,800 per month

Job Description

Servicing & Repair

· Repair, maintenance and test tasks for home appliances

· Providing service and customer support

Requirements

· Working Hours: 5.5 days (Monday – Friday : 08:30am to 05:30pm, Saturday: 08:30am to 12:30pm)

· Relevant working experience

· All ages are welcome to apply

· Able to speak English and Chinese in order to assist and communicate with clients.

· Near Simei (East region)

· Salary will be commensurate based on experience and qualifications.

· Please call 96178475 during office hour if you are interested