Network Engineer – Routing and Switching (Level-2)

Required Key Skills

· Expert level knowledge in implementation and maintenance of Cisco Routers and Switches of all series.

· Good knowledge in Cisco IOS

· Good knowledge in implementation and operations support of NAC (network access control)

· Good knowledge in Aruba Clear Pass / Cisco ISE

· Good knowledge in Wireless Network / Access Points / Controllers support and troubleshooting

· Expert level understanding of the OSI or TCP/IP model

· Provide Level-2 technical support and troubleshooting to resolve issues

· CCNP certification

· Hands-on experience with monitoring, network diagnostic, Packet Tracers and network analytics tools

· Good knowledge on Firewall Products like Cisco ASA, FortiGate, Palo Alto, Checkpoint

· Good knowledge on Aruba ClearPass/Cisco ISE, Cisco wireless controllers

· Knowledge on F5 load balancers

Priority Tasks

· Workplace is at customer premises and staff has to follow instituted Workplace securities

· Perform Problem resolution, escalation and/or closure of incident including problem analysis and identification of the source of the problem w.r.t Routing and Switching

· Perform configuration change activities

· Provide problem status to the Service Desk and/or update into the ticketing tool according to the Procedures Manual

· Perform day-to-day Network operation for the Network Infra-structure and Network Equipment at the customer/IBM premises, including performance monitoring, bandwidth monitoring.

· Work with customer's vendor to perform testing and preventative maintenance according to the schedule provided by the customer for the Network Equipment

· Perform periodic OS upgrade and Patching as and when required.

· 24X5 rotational shift onsite availability and 24X7 standby / remote support availability as and when needed for critical incidents.

· Perform Problem resolution, escalation and/or closure of incident including problem analysis and identification of the source of the problem

· Provide proactive incident reports for all Network related problems, faults, events within TWENTY-FOUR (24) hours

· Respond to all fault calls inclusive of emails and other forms of communications for Firewall related issues and problems reported

· Escalate the problem to Vendors Support in timely manner and get the issue resolved within the specified time as agreed with the customer/IBM

· Provide multi-vendor equipment support across a wide range of models and types of networking equipment

· Maintain the inventory of certificates and install/update/renew certificates as and when required.

· Perform security activities like hardening/periodic health check/ ID validation and other compliance activities as per IBM security policies and standards.

· Maintain/Update IBM inventory list and compliance related databases or similar Databases.

· Maintain the device inventory list for the client when needed, Maintain the software/firmware for all the devices up to date

· Subscribe to vendor notifications for the managed devices for vulnerabilities and review/validate/apply security patches pro-actively.

· Perform device activation / deactivation as per IBM service activation and deactivation process.

· Maintain the IP address inventory and allocate new IP address when required by business.

· Engage third part vendors to resolve hardware issues and follow up till closure

· Monitor vendor End of Life / End of Support notifications for all In Scope Devices and inform the client.

Responsibilities:

• Develop, design, and implement efficient manufacturing processes to improve productivity, quality, and safety.
• Conduct process simulations and tests to evaluate the feasibility of new processes.
• Provide maintenance and come up with a maintenance schedule for machines, jigs and fixtures.
• Lead and manage engineering projects from concept to completion, ensuring they are delivered on time, within scope, and within budget.
• Develop project plans, including schedules, resources, and budgets.
• Coordinate with cross-functional teams, including production, quality, and maintenance, to ensure project success.
• Implement Lean Manufacturing and Six Sigma methodologies to enhance process efficiency.
• Ensure all processes and projects comply with relevant health, safety, and environmental regulations.
• Conduct risk assessments and implement mitigation plans to ensure a safe working environment.
• Prepare and maintain detailed process documentation, including standard operating procedures (SOPs) and work instructions.
• Provide training and support to production staff on new processes and equipment.
• Conduct time study to get UPH.
• Other duties as assigned.

Requirements

• Bachelor’s degree in Engineering, Mechanical Engineering, Industrial Engineering, or a related field.
• Minimum of 3-5 years of experience in process engineering orproject management
• Proficiency in process simulation software (e.g., Aspen Plus,HYSYS).
• Strong understanding of Lean Manufacturing and Six Sigma principles.
• Knowledge of CAD software (e.g., AutoCAD, SolidWorks) is preferred.
• PMP certification is a plus.
• Experience in production

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for DevOps Engineer

Internal Code: A24104

We aims to spearhead the digital transformation of government. We are a team that aims to design and develop software applications that help government agencies better serve the needs of Singaporeans. We adopt an Agile development approach and work towards adopting tech best practices and cutting edge tools.

We are seeking highly motivated individuals skilled in DevOps to join us for some exciting projects. You’ll work with a multidisciplinary team of designers, developers and business experts to create solutions that exist in both digital and physical realms.

As we launch new products, your role will be to ensure that the future of public service is not just functional, but delightful to use. Rather than work on commercial ventures commonly found in the startup scene, we're here to improve how we live as a society through what we can offer as a government.

What will you do?

• Manage the development of the internal engineering productivity tools and environments.
• Providing DevOps architecture implementation and operational support
• Architecture and planning for cloud deployments (Private and Public cloud)
• Be an innovative and hands-on DevOps engineer capable of looking at both thetechnology and strategy around the platform.
• Future-proofing the technical environments and ensuring extremely highlevels of automation, availability, scalability and resilience.
• Manage the development of the internal engineering productivity tools and environments.
• Manage processes, automation, best practices, documentation.
• Development and operation of continuous integration and deployment pipelines.
• Monitoring automation to effectively detect/predict/prevent issues in the environment and code base.
• Ability to conduct research into software issues and products as required
• Working with the latest tools and techniques
• Hands-on coding and mentoring, usually in a pair programming environment
• Working in highly collaborative teams and building quality environments.
• Ability to effectively prioritize and execute tasks in a high-pressure, fast paced, global environment
• Knowledge in lots of different open source technologies and configurations.

What are we looking for?

• Degree or Diploma in Computer Science/Engineering, Information Technology, Communications or other related disciplines.
• At least three years of professional experience in a DevOps engineer or equivalent position.
• Strong knowledge and experience in Devops automation, containerisation and orchestration using tools like Kubernetes, Terraform, Ansible and Docker
• Strong scripting skills e.g. Python, Bash, JavaScript
• Cloud computing deployment and management experience -AWS
• Understand/practice Agile projects
• Strong understanding of networking

Preferred:

• Experience with highly scalable distributed systems
• Breadth of knowledge - OS, networking, distributed computing, cloud computing

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice () to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for DevOps Engineer

Internal Code: A24011

We adopt an Agile development approach and work towards adopting tech best practices and cutting edge tools.

We are seeking a highly motivated individuals skilled in DevOps to join us for some exciting projects.

You’ll work with a multidisciplinary team of designers, developers and business experts to create solutions that exist in both digital and physical realms.

As we launch new products, your role will be to ensure that the future of public service is not just functional, but delightful to use.

Rather than work on commercial ventures commonly found in the startup scene, we're here to improve how we live as a society through what we can offer as a government.

What will you do?

• Manage the development of the internal engineering productivity tools and environments.
• Providing DevOps architecture implementation and operational support
• Architecture and planning for cloud deployments (Private and Public cloud);
• Be an innovative and hands-on DevOps engineer capable of looking at both the technology and strategy around the platform.
• Future-proofing the technical environments and ensuring extremely high levels of automation, availability, scalability and resilience.
• Manage the development of the internal engineering productivity tools and environments.
• Manage processes, automation, best practices, documentation.
• Development and operation of continuous integration and deployment pipelines.
• Monitoring automation to effectively detect/predict/prevent issues in the environment and code base.
• Ability to conduct research into software issues and products as required
• Working with the latest tools and techniques
• Hands-on coding and mentoring, usually in a pair programming environment
• Working in highly collaborative teams and building quality environments.
• Ability to effectively prioritize and execute tasks in a high-pressure, fast paced, global environment
• Knowledge in lots of different open source technologies and configurations.

What are we looking for?

• Degree or Diploma in Computer Science/Engineering, Information Technology, Communications or other related disciplines.
• Strong knowledge and experience in Devops automation, containerisation and orchestration using tools like Kubernetes, Terraform, Ansible and Docker
• Strong scripting skills e.g. Python, Bash, JavaScript
• Familiar with Java is a plus
• Cloud computing deployment and management experience: AWS
• Understand/practice Agile projects
• Strong understanding of networking
• Experience in Infrastructure as Code (IaC)

Preferred:

• Experience with highly scalable distributed systems
• Breadth of knowledge - OS, networking, distributed computing, cloud computing

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice () to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Responsibilities

• Responsible for site activities, coordination and supervision works related to engineering and systems design.
• Coordinate with clients, architects, sub-contractors, and other relevant authorities Plan and ensure M&E works are completed in line with Master Programme and micro-schedule.
• Monitor and ensure all M&E works are carried out in accordance with drawings, specifications and Authority codes. Handle any other ad-hoc duties and tasks assigned.

Requirements

• Degree/Diploma in Mechanical Engineering recognised by Singapore
• Professional Engineers Board (PEB) in Civil Engineering or equivalent with 3 to 5 years of working experience in the construction industry.
• Required Skill(s): Autocad, Microsoft Office

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

• Assist to lead, supervise and motivate Technician and Associate Engineers.
• Supervise, provide technical advice, solutions and recommendations to maintenance team.
• Provide technical services, installation, troubleshooting CCTV, PA Systems, Card Access, and any other Security Systems.
• Lead and carry out Fault Finding and Diagnosis of systems breakdowns, both on a mechanical and electrical basis, with a focus on providing high levels of service and response times.
• Readily to be deployed in Preventive Maintenance, Corrective Maintenance, and any enhancement projects.
• Follow Preventive and Corrective Maintenance work schedules to specified standards and procedures and maintain all relevant written records as applicable.
• Be available for on call and standby duty procedures and other responsibilities required.
• Maintain records of breakdowns and repairs in compliance with ISO standards.
• Committed to attend to any operational and maintenance issues.
• Review the system of existing contract and propose for enhancement or upgrading, as necessary.
• Involve in preparation of proposal and quotation for enhancement job.
• Involve in variation/enhancement orders of existing maintenance contract that includes necessary document preparation, submission, installation, procurement, liaising with contractor, customer, testing and commissioning.
• Conduct training and develop training material for the variation job and maintenance job.
• Assist supervisor in ensuring all corrective maintenance is attended and rectified based in SLA, all preventive maintenance is carried out based on the maintenance schedule and all reports are submitted timely.
• Review and recommend any work process for continuous improvement of maintenance operation
• To follow all company business operation and SOP at all times.
• Participate actively in Health Safety and Environment programs and activities in order to achieve Company’s KPIs, ISO 14001 objectives and target. Proactively rectify any abnormalities, unsafe acts or unsafe situations and report to supervisor accordingly.
• Maintain high standard of housekeeping at all times.
• Any project or operational duties as assigned by supervisor

Job Description

• Provide post-sales installation and technical support to clients
• Competent in Microsoft Windows Server Operating System, TCP/IP, DNS, and troubleshooting of system issues
• Analyze requirements and perform network solutioning, planning, installation and setup of network systems
• Installation and configure cloud services like Microsoft 365, Microsoft Azure, Acronis Cloud and Sophos Cloud Service
• Provide network operation support, problem isolation, and troubleshooting for network incidents

Requirements (Qualifications/Experiences/Behavioural):

• Min. Diploma or Bachelor’s degree in Computer Sciences, Information Technology or a related field preferred
• Min. 2 year of relevant experience operating in a similar role
• Required Skill(s): Cisco Networking, Fortinet Firewall, Windows Server, Virtualization
• Strong foundation in network knowledge
• Able to work independently and without supervision, and meticulous
• Strong troubleshooting and analytical skills
• May be required to provide on-call support
• Has passion for IT technology, driven and willingness to learn new technologies in a fluid and fast-paced environment
• Good interpersonal and communication skills to interact effectively at all levels

Job Description

• Lead a team of Service Engineers and IT Admins
• Monitor team’s progression on all incoming service requests on hardware or software issues
• Execute all assigned cases effectively and efficiently with a sense of urgency
• Provide timely and effective resolution to service requests and incidents
• Handle high volume of client’s service requests and assigned accordingly to the team
• Handle client’s complaints and ensure customer satisfaction during closure
• Liaise smoothly between internal stakeholder and clients for any sales-related matters
• Provide on and offsite support if needed
• Manage Service Engineers daily schedule
• Manage team’s transportation and phone claim usage
• Assist in other ad-hoc tasks assigned by Technical Manager

Job Requirements

• Bachelor’s degree in relevant field or equivalent combination of education and experience
• Minimum 3 to 5 years of related experience
• Motivated and able to initiate work process
• Strong leadership skill with good communication
• Excellent customer service and support skills
• Possess and in-depth knowledge of PC/laptops/notebooks hardware (i.e. knowledge of parts)
• Possess strong organizational skills and ability to prioritize tasks among many competing requests

Salary Range: $3800~$4900

JOB TITLE: PROJECT ENGINEER / CO-ORDINATOR / SUPERVISOR

RESPONSIBILITIES:

· Co-ordinate with Other Project Engineers/Clients & Site Supervisors at projects’ sites, on progress of schedule and work done

· Supervise and Inspect jobs done (Quality & Quantity) at projects’ sites.

· Base on Site Supervisors’ requisition, Send materials list to Purchasing Team to arrange.

· Verify workers’ attendance record, write progress report and send them to Admin department via Whatsapp

· Facilitate and request if any additional resources are required

· Ad-hoc duties if any assigned by Project Manager

*TRAINING WILL BE PROVIDED WHERE REQUIRED

Requirements

· O Level, Diploma/ITE, Degree in Mechanical Engineering, Electrical Engineering, Civil or other related studies

· Fresh, or any experience as a Project Engineer or co-ordinator related to Air-conditioning (ACMV Piping, Insulation works (Jacketing), and/or Electrical is added advantage, but not must

· Having Class 2 and/or 3 Driving License is a plus. Company will provide a vehicle /transportation

Please send your Resume to [email protected]

Or please Whatsapp at 98867100

Only shortlisted candidate will be called for the interview

Responsibilities:

• Perform site management on the installation works, inspections, testing, commissioning and handing over

• Liaise with the clients, consultants, contractors,

• Monitor work progress and responsible for document, drawing, sample etc submissions

• Assist in Engineering related matters for systems such as CCTV, Security, Computer Networking and Telecommunications Infrastructure

Salary Range: $3500~$4500

JOB TITLE: PROJECT ENGINEER / CO-ORDINATOR

RESPONSIBILITIES:

· Co-ordinate with Other Project Engineers/Clients & Site Supervisors at projects’ sites, on progress of schedule and work done

· Supervise and Inspect jobs done (Quality & Quantity) at projects’ sites.

· Base on Site Supervisors’ requisition, Send materials list to Purchasing Team to arrange.

· Verify workers’ attendance record, write progress report and send them to Admin department via Whatsapp

· Facilitate and request if any additional resources are required

· Ad-hoc duties if any assigned by Project Manager

*TRAINING WILL BE PROVIDED WHERE REQUIRED

Requirements

· O Level, Diploma/ITE, Degree in Mechanical Engineering, Electrical Engineering, Civil or other related studies

· Fresh, or any experience as a Project Engineer or co-ordinator related to Air-conditioning (ACMV Piping, Insulation works (Jacketing), and/or Electrical is added advantage, but not must

· Having Class 2 and/or 3 Driving License is a plus. Company will provide a vehicle /transportation

Please send your Resume to [email protected]

Or please Whatsapp at 98867100

Only shortlisted candidate will be called for the interview

Custodio Technologies Pte Ltd. is a Singapore-based cybersecurity R&D innovation centre. We are looking for a Software Engineer (Backend) to be part of our team of passionate cyber security professionals and researchers.

Custodio Technologies engages in novel and innovative research, with the goal of developing fully-fledged solutions for implementation globally. Focusing on active defence approaches, it spearheads R&D activities in the field of cyber early warning as well as cybercrime prevention, forensics, and investigation for law enforcement agencies.

What You’ll Do:

• Develop and maintain high-quality, scalable web applications using modern technologies.
• Work closely with cross-functional teams to design, develop, and deploy new features.
• Contribute to backend development with a focus on clean, efficient, and maintainable code.
• Collaborate with team members to solve complex problems and deliver solutions that meet user and business needs.
• Stay up to date with the latest technologies and best practices to continuously improve our codebase and workflow.

For experienced candidates:

• Provide technical leadership and mentorship, guiding them in best practices, design patterns, and problem-solving.
• Take ownership of critical components, driving technical initiatives from inception to completion.
• Conduct thorough code reviews, ensuring high-quality, clean, and maintainable code across the team.

Who we are looking for:

• Diploma, bachelor's degree or equivalent in Computer Engineering/Science or relevant engineering majors.
• Minimum of 3 years of professional experience in software development.
• Strong proficiency in at least one programming language - Node.js (TypeScript), Python or .NET C#. Willing to pick up the others quickly.
• Experience working with both relational (PostgreSQL) and non-relational databases (MongoDB).
• Knowledge in Queuing Systems (Kafka, RabbitMQ)
• Experience with agile software development methodologies and tools
• Cyber security experience will be an added advantage.

A Job holder will be providing support and project delivery for the SSO and Identity Management platforms in the following topics:

Architecture

Project Delivery

Platform Support and Maintenance

Incident and Problem Management

Change Management

General The candidate will also be well versed with cryptographic notions such as RSA, symmetric and asymmetric encryption, certificates and digital signatures etc.

Architecture

To provide architectural expertise thereby driving change and improvement in technology and process.

To contribute to the development of the SSO and LDAP technology roadmaps.

To liaise with CIB architecture teams in undertaking architectural reviews.

To stay abreast of emerging technologies and technology trends.

To automatize the process to accelerate the delivery time Project Delivery

To take responsibility for the delivery of key projects around SSO and LDAP which are aligned to drive significant change within the platform.

To work with the Application Production Support project managers in defining, designing, documenting and implanting new functionality for existing and new applications.

To liaise with the Application Developers in low-level diagnosis of on-going issues.

To provide subject matter expertise on SSO and IDM technologies to all business application teams.

To act as technology evangelists for the improvement of process and technology in use for the Authentication services within Client Platform Support and Maintenance

Pro-actively monitor, manage and improve availability and performance of the production environments (from presentation and application layers to Infrastructure layers)

Pro-actively manage the capacity of production applications

Incident and Problem Management

To work with partner teams to conduct analysis of major and critical incidents.

To identify tactical or strategic improvements that can be introduced to help reduce the number of on-going incidents within the SSO and LDAP area. Change Management

To work within the change management framework adopted by Client to ensure that all changes to the production environment are planned and executed in a controlled manner.

To take responsibility for the quality of changes within the SSO and IDM environments, ensuring that changes raised are of sufficient standard in terms of technical and planning detail.

Attending and sharing knowledge / updates in the Weekly Change Control Board Meetings and the Weekly Problem Management Meetings. General

Perform pre-assigned tasks to accomplish the function responsible for. The nature of these tasks are Change The Bank or Run The Bank

Work cooperatively with the other members of the team

Ensure adherence to processes and procedures

Request improvement of knowledge (training) when needed

Apply own initiative, within the levels of acceptable risk

Whenever in doubt, escalate and seek advice and guidance

If the nature of the position is user-facing, then all the guidelines and principles of user service mentality and behavior should be applied

Escalate risks / issues to the manager of the team

Minimise operational failure, including but not exclusively, the risk of fraud, by helping to devise, and by implementing, sufficient regular controls.

Ensure appropriate escalation to management and/or Permanent Control (or Compliance as appropriate) as soon as an issue is identified.

Provide a direct contribution to the client’s operational permanent control framework. As this is a production support role, focusing across a range of different and mostly innovative technologies, candidates must possess the aptitude and desire to learn. In addition, ability to be on call and provide support out of hours is essential.

Professional Knowledge & Expertise

Essential:

Technical Skills essential for the role include, but not limited to:

CA Siteminder Web SSO

SOA security - SAML / WS-Security

Autoprovisioning tools such as BMC ControlSA, Sailpoint, or Forgerock

LDAP

Kerberos / SSL/TLS / PKI / GSS-API / SPNEGO

oAuth2, OpenIDConnect

IIS/WCF/WIF, WAS security models

Infrastructure standards for network load balancers, servers, networks and storage

Automation mind-set with experience in using tools like Ansible

Scripting skills using Python/JS or shell

Application Server : Good exposure in configuring and supporting web technologies such as Tomcat, Apache, nginx, IIS

Proven logical and methodical problem analysis and troubleshooting skills

Working with an industry recognised service desk and project management toolset

Clear communicator in both written and oral forms Desirable:

Technical Skills desirable for the role include:

Axway Security gateway

SQL, Database schema

Authentication services for APIs

Exposure to Apigee API gateway

Knowledge of Process & Quality management, ITIL v2/v3

Microsoft Project, Advanced Excel, PowerPoint and Word

Knowledge of Atlasian Jira Task Management toolset

Previously used ServiceNow as a Service Desk Management productSoft & Interpersonal Skills

Very strong analytical skills

Strong attention to detail

Structured and methodical mind-set

Ability to operate with demanding Senior IT Management

Can do attitude; look at changes as opportunities to improve

Team oriented

Good interpersonal and communication skills LANGUAGES

High English spoken and written fluent (B2/C)

Employment Type : 1 Year Contract , Renewable

The Senior Equipment Engineer is responsible, as a member of the interdisciplinary operations team, for installing, commissioning, qualifying, and maintaining the company’s processes. This includes transferring, developing, building, documenting, and repairing processes. Furthermore, the Senior Equipment Engineer will support the necessary training activities to ensure the processes are operated correctly.

Your Responsibilities

• Install, test, commission, and qualify all production equipment.
• Manage and support calibration, preventive maintenance, and breakdown maintenance activities.
• Ensure sufficient stock levels of essential spares and consumables to support equipment maintenance and minimize downtime.
• Manage and support transfer projects, document change processes, and audit activities.
• Coordinate with local and global cross-functional teams to manage non-conformities (NC) and corrective and preventive actions (CAPA)
• Establish equipment maintenance controls and regularly review and update PM procedures, risk assessments, and troubleshooting guidelines.
• Drive equipment fault investigations and continuous improvement programs to resolve equipment issues, propose solutions to ensure product quality and enhance process robustness.
• Management of local vendors and the technical support team at headquarters
• Lead and guide equipment technicians in all aspects of maintenance to enhance their technical competencies.
• Provide training to operators and engineers on equipment maintenance.
• Drive cost reduction efforts to eliminate unnecessary expenses and waste while improving equipment performance.
• Perform any ad hoc duties as assigned by the Equipment Engineering Manager

Your Profile

• At least a Bachelor’s degree in Mechanical Engineering or a related engineering discipline.
• At least 5 years of relevant experience in equipment maintenance, preferably in the medical device industry.
• Hands-on experience with Siemens PLC, familiarity with SAP and ARAS Innovator will be an added advantage.
• Meticulous, responsible, flexible, independent, and customer-oriented
• Proficient in English, both orally and in writing; German is preferred.
• Experience working in a project environment with strong problem-solving skills.
• Business knowledge preferred.

We are looking for a versatile and creative **3D Design and Digital Marketing Engineer** to join our team. The ideal candidate will be responsible for designing 3D models, managing 3D printing, handling digital content creation, and managing online marketing campaigns across platforms like Facebook and Instagram. You will also be responsible for maintaining and updating our company’s website to ensure it remains visually appealing and functional.

**Key Responsibilities:**

• Design and create 3D models using CAD or other 3D modeling software.
• Operate and manage 3D printing processes.
• Edit and enhance images for promotional materials using Photoshop.
• Develop, maintain, and update the company's website.
• Plan, create, and manage online advertising campaigns, especially on Facebook Ads and Instagram.
• Collaborate with other team members to ensure consistent branding across digital platforms.
• Analyze the performance of digital ads and optimize campaigns to increase effectiveness.

**Requirements:**

• Proficiency in 3D modeling software (e.g., AutoCAD, Blender, Fusion 360 or similar).
• Experience with 3D printing technology.
• Strong skills in Adobe Photoshop for image editing.
• Knowledge of web design principles and experience maintaining websites (WordPress or similar platforms).
• Hands-on experience with Facebook Ads Manager and Instagram Ads.
• Strong attention to detail and creativity in design.
• Ability to multitask and manage various projects simultaneously.
• Excellent communication and teamwork skills.

**Preferred Qualifications:**

• Experience with other Adobe Creative Suite tools (Illustrator, InDesign, etc.).
• Basic knowledge of HTML/CSS for website customization.
• Previous experience in both design and marketing roles.

Contact W/apps: +65 96714031 / https://wa.me/6596714031

8 Kaki Bukit Ave 4 #03-10

Premier@Kaki Bukit

Singapore 415875

Responsibilities

• Provide L1 Support to the IT Team
• Assist on L2 IT-related matters and work with vendor on issues
• Maintenance of IT peripherals including backup & recovery
• Set-up & installation or migration of IT peripherals
• Relocation of IT peripherals within premises
• Troubleshoot hardware & software issues
• Users profile administration
• Provides IT Support for onboarding and offboarding of staff
• Installation and configuration of software according to customer standard

Requirement

• Minimum ITE / Diploma in IT or equivalent
• At least 1-2 year(s) of working experience in IT field
• User support experience is preferred
• Have Customer Service Skills/ Good Communication Skills/ Team Player/ Take Initiative
• Able to work under pressure and in a fast paced environment

Others

• Working Hours: 9.00am - 05.30pm (Mon to Fri)

[1 year contract, renewable]

We are seeking a highly skilled and experienced Senior Data Engineer with 4 to 8 years of relevant experience to join our dynamic team. As a Senior Data Engineer, you will be responsible for the development, implementation, and maintenance of our Business Intelligence (BI) and Data Warehouse projects. You will work closely with stakeholders to gather requirements, design data solutions, and ensure data integrity, scalability, and security across multiple platforms.

Responsibilities:

· Collaborate with the Product Owner to define and execute the roadmap for BI and Data Warehouse projects.

· Gather and analyze business requirements from stakeholders and design appropriate data solutions.

· Develop data warehouses and data marts both on-premises and in the cloud.

· Design and implement reports, dashboards, and interactive visualizations.

· Ensure proper version control, system documentation, and change management.

· Provide operational maintenance and support for non-production environments.

· Manage incidents, service requests, and ensure timely issue resolution in line with the Service Level Agreement (SLA).

· Implement enhancements based on business requirements and timelines.

· Support audits or reviews and assist in follow-up actions from audit recommendations.

· Test software patches or upgrades and coordinate production deployment.

· Conduct training sessions and user briefings to elevate BI competency.

Qualifications:

· 4 to 8 years of relevant experience in Data Engineering.

· Tertiary education in Computer Science, Information Systems, or a related field.

· Strong knowledge of data modeling, data processing, data warehouse architecture, data management, and data security.

· Hands-on experience in SQL programming.

· Proven experience in building and managing data warehouses.

· Proficiency in visual analytics tools such as Power BI or Tableau.

· Experience with:

1. AWS Cloud platform: Lambda, Step Functions, ECS, ECR, Glue, Athena, RDS, Eventbridge, API Gateway, SQS.
2. Python & container development.
3. SQL and PostgreSQL: Creating tables, views, and partitioning.
4. Microsoft SQL Server Integration Services (SSIS) for data ingestion.
5. Data modeling, preferably with ER Studio.

· Strong analytical, problem-solving, and logical thinking abilities.

· Ability to work effectively in a team with strong communication skills (both written and spoken).

· Willingness to learn and adapt in a fast-paced environment.

Preferred Skills:

· Experience with Denodo, SQL Polybase.

· Familiarity with DevOps tools like Azure DevOps, GitLab, JIRA, and Confluence.

· Experience with Microsoft SharePoint development.

· Unix scripting for secure file transfers.

· Knowledge of .NET programming (e.g., C#).

· Experience with Kafka or AWS Kinesis.

• Review requirements, specifications, and technical design documents to provide timely and meaningful feedback.
• Create detailed, comprehensive, and well-structured test plans and test cases.
• Design, develop and execute automation scripts using the automation framework.
• Perform regression testing and participate in release cycles.
• Liaise with other internal teams to identify system requirements and perform end-to-end testing to ensure quality throughout the life cycle.
• Stay up to date with new testing methodologies and testing tools.

• Experience in Quality Assurance/Testing, Automation framework design (desirable), or related experience.
• Strong experience with building and writing automation scripts and/or programs using tools such as Selenium/Playwright etc.
• Strong programming experience in Java/Java Script/Type Script or similar object-oriented language.
• Good experience in writing BDD scenarios using Gauge/Cucumber/Serenity/ any other BDD tool.
• Good experience in API testing preferably with Rest Assured tool.
• Experience in Security Testing/Performance Testing(preferably JMeter or Taurus) is an advantage
• Exposure to collaborating tools like GitHub, JIRA, Confluence
• Exposure to Scrum methodology and XP technical practices such as unit testing, pair programming, test-driven development, continuous integration, or continuous deliver

Technical Responsibilities

• Undertake design document reviews and possess in depth knowledge of project specification, relevant international codes, industry standards and relevant Classification Rules and Regualtion
• Prepare in-service design concept and perform detailed design as required by project. Prepare and deliver structural design sketches and structural calculations report at project datelines and quality.
• Ensure effective communication and coordination with multi-disciplines team to obtain input for Discipline designs and to develop a crash free design.
• Prepare design concept for structural framing, grillage and fastening during in-transport and onsite condition and perform structural engineering for in-transportation and installation conditions for the unit
• Prepare procedures for loadout, transportation and installation operations
• Utilises STAAD PRO and SAP2000 software as well as company proprietary Microsoft Excel spreadsheets as required. Conversant with relevant International Codes of Practice as well as engineering and industry standards
• Adheres to and complies with engineering procedures and industrial standards/codes and provides constructive feedback for continuous improvement. Identifies potential applications for new processes and technologies to improve productivity and efficiency
• Ensures effective communication and interface between all disciplines for design and development
• Ensure project meets client requirements, industry standards and relevant Classification Rules and regulations
• Participates in internal audits and investigations as required
• Establishes and maintains effective working relationships internally. Engages with inter-discipline community and promotes networking and knowledge sharing
• Review all detailed drawings ensuring technical correctness, professional presentation and that fabrication and installation requirements are employed.
• Review vendor deliverables, checking for compliances with project specifications and providing comments as necessary.
• Provide technical support to fabrication queries

Job Requirements

• Bachelor’s or Master’s degree in Civil & Structural Engineering or equivalent engineering specialisation from an accredited university
• 5+ years professional engineering in the related field
• STAAD.PRO, SAP2000 familiarity. Knowledge in SACS is an advantage
• Familarity of industry standards, codes and/or Classification Society Rules
• Excellent technical communication (oral and written) skills with proven ability to present technical issues to design teams and project engineering teams
• Self-starter and be able to work with minimal supervision, make sound decisions, take independent action, analyze problems, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels
• High level of numerical accuracy and attention to detail
• Preferably to have some experience in Transportation and installation or naval architectural related design or Marine Warranty Survey (MWS)

• Plan and schedule work sequences for construction operation
• To study tender / construction drawings, specifications and contracts to understand project requirements
• Liaise with consultants, client & main / sub-contractors and coordinate for site activities arrangement
• Perform site inspection and ensure that the work are carried out based on the project specification and construction drawing / final approved drawing from authorities
• Lead a team of supervisors for works coordination with main/sub-contractors and/or authorities and/or consultant on project progress and technical issues
• Planning and deployment of resources such as manpower, machinery, equipment and material
• Preparation of progress report, Method Statements and technical submissions
• Ensure the project complies with regulations and clients’ specifications
• Adhere to safety and health regulations and aim for zero accident in the workplace

Job Requirements:

• Candidate must possesses Bachelor's Degree in Civil Engineering
• At least 3 years of working experience in the related field is required

Technical Responsibilities

• Delivers pipe stress and other miscellaneous calculations efficiently and effectively manages multiple tasks independently and in a multi-disciplinary team.
• Utilises CAESAR II and AutoPIPE engineering software as well as company proprietary Microsoft Excel spreadsheets as required. Conversant with relevant International Codes of Practice as well as engineering and industry standards
• Provide necessary sketches and guidance to piping designers or drafting team and verify that Piping requirements are reflected in the design. Ensure output is completed on time, on budget, and exceeding quality standards
• Assists in preparation of datasheets and checking of piping material take off
• Assists in design reviews and participate in other discipline reviews if required. Ensures incorporation of all Piping-related review comments. Detailed review of drawings for scope and presentation, including checking for technical accuracy and adherence to company standards
• Establishes and maintains effective working relationships internally. Engages with inter-discipline community and promotes networking and knowledge sharing

Job Requirements

• Bachelor’s or Master’s degree in Mechanical Engineering or equivalent Engineering Specialisation from an accredited university
• 1+ years professional engineering in the related field. Fresh Graduates are strongly welcomed to apply.
• Excellent technical communication (oral and written) skills with proven ability to present technical issues to design teams and project engineering teams
• Self-starter and be able to work with minimal supervision, make sound decisions, take independent action, analyze problems, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels

Roles & Resbonsiblity:

Interpret technical designs and drawings

Manage M&E works to meet project specifications, budgets and timeline

Prepare reports to clients and project manager on progress, delays, defects and rectification measures for the M&E works

Provide technical advice and resolve M&E technical issues on site

Supervise M&E works (e.g. installation of green building technologies, lighting, air-conditioning, mechanical ventilation) in the construction project

Plan, design and administer contract/project of mechanical and electrical engineering works for building services.
Prepare tender specifications and review tender drawings
Perform tender evaluations and prepare tender evaluation reports
Attend technical and progress meetings with client, architects, consultants and contractors
Manage the projects and identify any non-conformity of contractor’s work at site
Other adhoc duties as assigned

Requirments :

• At least 3 years of relevant industry experience.

Diploma/ Degree in Mechanical or Electrical Engineering or equivalent.

• Relevant working experience in an M&E Consulting firm is an added advantage.

• Knowledge in design and building project and relevant code of practice.

• Proficiency in AutoCAD/ BIM software is an added advantage.

• Able to work as a team, assertive, independent and proactive.

• Must have successfully started Residential, Commercial, Industrial, Institutional & Recreational projects

• Qualified for registration in Professional Engineers Board, Singapore will be an advantage

Avensys is a reputed global IT professional services company headquartered in Singapore. Our service spectrum includes enterprise solution consulting, business intelligence, business process automation and managed services. Given our decade of success we have evolved to become one of the top trusted providers in Singapore and service a client base across banking and financial services, insurance, information technology, healthcare, retail, and supply chain.

We are currently looking to hire Senior Application Engineer - Mobile Apps tester

This is an exciting opportunity to expand your skill set, achieve job satisfaction and work-life balance. More details as below.

Job Type: One-year Renewable Contract

Key responsibilities

· Tester should know to test Android and IOS App

· Plan for and undertake testing of new systems and system upgrades.

· Understand and analyse testing requirements to prepare test plan, and test design

· Advise project team on design consideration to facilitate meeting of requirements. Advise business analysts and/or customers on the testing requirements and test techniques

· Prepare and ensure readiness of test bed and test environment to carry out the test execution

· Execute test in accordance to the test design

· Analyse test results and work with respective teams to resolve issues such as defect open and resolution rate, bottlenecks in performance and other defects

· Prepare test report for submission

· Provide regular test results updates

· Recommend and use automated testing tools where appropriate

· Manage test activities and ensure the planned test activities are completed as scheduled

WHAT’S ON OFFER

You will be remunerated with an excellent base salary and entitled to attractive company benefits. Additionally, you will get the opportunity to enjoy a fun and collaborative work environment, alongside a strong career progression.

To submit your application, please apply online or email your UPDATED CV in Microsoft Word format to [email protected]. Your interest will be treated with strict confidentiality.

CONSULTANT DETAILS

Consultant Name: Preethi Kanthappan

Reg No: R1765546

Avensys Consulting Pte Ltd
EA Licence 12C5759

Privacy Statement: Data collected will be used for recruitment purposes only. Personal data provided will be used strictly in accordance with the relevant data protection law and Avensys' privacy policy.

Responsibilities:

• Collaborate with cross-functional teams, including, electrical engineers, mechanical engineers, designers, programmers, suppliers, and stakeholders, to plan, execute, and deliver engineering projects focused on green marine systems for marine vessels within defined timelines and budgets.

• Together with core technical teams, conduct feasibility studies, evaluate technical requirements, and develop project specifications and scopes of work for green marine system integration projects.

• Coordinate and oversee engineering activities throughout the project lifecycle, ensuring adherence to project plans, standards, and regulatory requirements.

• Together with technical team, review and interpret technical drawings, schematics, and specifications to ensure accurate implementation of green marine system designs and compliance with industry standards and regulations.

• Conduct risk assessments and develop mitigation strategies to ensure the safety, efficiency, and reliability of green marine system projects.

• Monitor project progress, identify potential issues or bottlenecks, and implement corrective actions to ensure project milestones and deliverables are met.

• Manage project budgets, track expenses, and provide regular cost reports to stakeholders.

• Coordinate and track procurement activities for green marine system components.

• Collaborate with the procurement team to ensure timely delivery of materials, equipment, and services required for green marine system projects.

• Conduct regular site visits and inspections to monitor installation and integration activities, resolve technical issues, and ensure compliance with project specifications.

• Prepare and deliver project progress reports, presentations, and technical documentation to stakeholders and senior management.

• Manage delivery of documentations, including but not limited to FAT, HAT, SAT, operational and maintenance manuals.

Requirements:

• Bachelor’s degree in Marine Engineering, Mechanical Engineering, Electrical Engineering, or a related field.

• Proven experience as a Project Engineer, Marine Superintendent or similar role in the marine, shipbuilding or relevant industry, with a strong track record of successfully delivering engineering projects.

• Knowledge of marine vessels systems, including electric motors, generators, batteries, power management systems, and control systems is an advantage.

• Familiarity with marine vessel propulsion systems, including diesel engines, gas turbines, and electric propulsion technologies.

• Proficiency in using engineering software and tools, such as AutoCAD, SolidWorks, and project management software.

• Strong project management skills, with the ability to plan, prioritize tasks, manage deadlines, and adapt to changing project requirements.

• Excellent analytical and problem-solving abilities, with a keen attention to detail.

• Effective communication and interpersonal skills, with the ability to collaborate with cross-functional teams and stakeholders.

• Strong leadership skills, with the ability to motivate and guide project teams.

• Knowledge of procurement processes and experience in managing supplier relationships.

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

Avensys is a reputed global IT professional services company headquartered in Singapore. Our service spectrum includes enterprise solution consulting, business intelligence, business process automation and managed services. Given our decade of success we have evolved to become one of the top trusted providers in Singapore and service a client base across banking and financial services, insurance, information technology, healthcare, retail, and supply chain.

We are currently looking to hire Senior Application Engineer - Mobile Apps tester

This is an exciting opportunity to expand your skill set, achieve job satisfaction and work-life balance. More details as below.

Job Type: One-year Renewable Contract

Key responsibilities

· Tester should know to test Android and IOS App

· Plan for and undertake testing of new systems and system upgrades.

· Understand and analyse testing requirements to prepare test plan, and test design

· Advise project team on design consideration to facilitate meeting of requirements. Advise business analysts and/or customers on the testing requirements and test techniques

· Prepare and ensure readiness of test bed and test environment to carry out the test execution

· Execute test in accordance to the test design

· Analyse test results and work with respective teams to resolve issues such as defect open and resolution rate, bottlenecks in performance and other defects

· Prepare test report for submission

· Provide regular test results updates

· Recommend and use automated testing tools where appropriate

· Manage test activities and ensure the planned test activities are completed as scheduled

WHAT’S ON OFFER

You will be remunerated with an excellent base salary and entitled to attractive company benefits. Additionally, you will get the opportunity to enjoy a fun and collaborative work environment, alongside a strong career progression.

To submit your application, please apply online or email your UPDATED CV in Microsoft Word format to [email protected]. Your interest will be treated with strict confidentiality.

CONSULTANT DETAILS

Consultant Name: Preethi Kanthappan

Reg No: R1765546

Avensys Consulting Pte Ltd
EA Licence 12C5759

Privacy Statement: Data collected will be used for recruitment purposes only. Personal data provided will be used strictly in accordance with the relevant data protection law and Avensys' privacy policy.