As a Senior Piping Engineer, he/she shall act as key person of the project as designated by Piping Department Manager and Lead Piping Engineer and performs the function inherent to this position. Responsible for the preparation of major piping layout, MTO sketch, and 3D CAD model review on piping system, equipment and structure, and interference detection. Has the technical responsibility for interpreting and evaluating stress/ vibration result, for reviewing piping layout, and piping information. He/She will also be responsible for reviewing piping engineering progress against approved schedule, for evaluating changes and taking corrective action when required, for providing technical guidance, and for organizing, executing and coordinating these responsibilities to ensure timely completion and meets project schedule and budget.

Duties and Responsibilities:

• To study ITB, project and design basis such as scope of work, overall project schedule, basic design data, client specification, client standard drawings, existing drawings, and plot plan.
• To assist in planning and organizing piping engineering activities and manpower requirement for the project.
• To assist in developing piping engineering and design schedule, manpower requirements, manhour distribution and execution plan based on the scope of work and approved budget manhour/schedule.
• To coordinate piping design and engineering effort with other area Lead Engineers and disciplines of the project as directed by Piping Design Supervisor.
• To prepare piping information list and layout and document list following standard procedure created for the project.
• To prepare piping general specification inclusive of specification for piping arrangement, piping support standards.
• To interpret and evaluate stress/vibration analysis result and provides necessary recommendation on resolving the method of analysis.
• To develop conceptual routing, piping layout and piping information of major critical equipment of the project such as tower/column, airfin coolers, heaters, compressors and reactors, preferably in 3D CAD format.
• To check and review all work such as piping layout and information prepared by Engineers, 3D model, MTO, BQ and other deliverables of the project for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
• To provide field engineering support/advice towards piping installation and testing at construction site.
• To perform the function inherent to Piping Key Person as designated by Piping Department Manager and Lead Piping Engineer.
• To evaluate the performance of and provide counseling and guidance to members of the project.
• To prepare lesson learned upon completion of the project and recommend preventive actions to avoid recurrence on future projects to Piping Design Supervisor.
• To perform other tasks that may be assigned by the Department Manager and Lead Piping Engineer.
• To carry out engineering support work during the construction phase of the project.

Requirements:

Education:

• Bachelor degree of any four years BS Engineering course preferably Mechanical Engineering or at least ten (10) years related experience and/or training; or equivalent combination of education and experience.
• Minimum of eight (8) years in the field of piping design involving detailed design, stress evaluation, production work, 3D model review, and construction engineering support, three (3) years of which in a supervisory capacity.

Skill Requirements:

• Ability to use computer equipment and peripherals to carry out routine computing tasks.
• Good Knowledge of AutoCAD.
• Good knowledge of SP3D.
• Basic knowledge of 3D Model review through Naviswork or SPR.
• Interpretation of stress/vibration analysis report.
• Ability to read, analyze, and interpret common technical information, contracts reports and instructions.
• Ability to respond to common inquiries or complaints from clients and ability to write effective minutes of meeting and other related business communications.
• Strong leadership qualities and analytical and reasoning abilities.
• Good interpersonal and communication.

What You’ll Be Doing

• Design and implement innovative solutions for our full range of products.
• Build out industry-leading finanical platforms.
• Performance optimization for overall backend architecture aiming for low latency, high availability and scalability
• Build high availability high performance distributed service.
• Improve technology best practices and code reviews for peers.
• Work closely with Product, Design and Marketing teams to drive rapid innovation in cross-functional teams.

What We Look For In You

• Solid STEM (Science/Technology/Engineering/Mathematics) education background.
• Minimum 8 years of relevant experience in backend development, with data structures/algorithms.
• Strong logical thinking and problem-solving skills.
• Fluent with high performance Java and async programming patterns.
• 5 years of experience with distributed systems and micro service architecture.
• Experience leading project teams and defining technical strategies.
• Proven track record of collaborating with teams across different offices and time zones, and managing cross-functional projects.

Nice to Have

• Willing to learn all aspects of trading products in financial and crypto markets, including spot, future, swap, options, and structured products.
• Proficiency in speaking, reading and writing in both English and Mandarin to collaborate effectively with global and cross-functional team members.

Responsibilities

· Responsible for creation/ modification/ improvement of work instructions based on feedback from stakeholder(s).

· Responsible for building on medical robot/ controller unit/ cart.

· Ensure production quality and consistency.

· Provide feedback to development team on product improvement base on production flow.

· Maintain production documents.

· Analyze production process and propose production improvement plan.

· Troubleshoot production discrepancy/ variance.

· Conduct in-process verification on modular and system level.

· Program controller units

Competency Requirements

· Responsible for creation/ modification/ improvement of work instructions based on feedback from stakeholder(s).

· Responsible for building on medical robot/ controller unit/ cart.

· Ensure production quality and consistency.

· Provide feedback to development team on product improvement base on production flow.

· Maintain production documents.

· Analyze production process and propose production improvement plan.

· Troubleshoot production discrepancy/ variance.

· Conduct in-process verification on modular and system level.

· Program controller units

JOB DESCRIPTION

Duties:

• The project will be using AI Technology.
• Project Engineer cum Inspector need to drive Van when carry out inspections of all roads and road-related facilities.
• Must have driving license.
• Report defects picked up during inspections.
• Report immediately to the Supervisor and the Project Manager any incidents or defects posing immediate concern, safety, or inconvenience to the public.
• Submit daily reports on the condition of the roads, footpaths & walkways, service roads & footways, and road-related facilities to the Authority.
• Project duration about 3 years

Qualifications:

• Minimum 1-2 years’ experience in civil/ structural engineering works or other engineering equivalent.
• Able to recognize and identify defects on the roads, footpaths & walkways, service roads & footways, and road-related facilities.
• Good knowledge of repair methods for defects identified on roads and road related facilities.
• Minimum qualification --- Degree in Civil

Interested candidates, please forward directly the detailed resume in to [email protected]

Please include following information in the resume

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary in Singapore Dollar

3) Expected salary in Singapore Dollar

4) Personal References

Your new company
Our client is a global leader in the design, engineering, and construction of high-tech facilities, including life sciences and data centre projects. They always strive to deliver innovative solutions, ensuring safe, sustainable, and functional environments. They are going through growth mode in recent years and are now looking to expand their headcount with a principal architect.

Your new role
A few of your responsibilities would be ;

· Collaborate with multidisciplinary teams to develop mechanical systems designs meeting project objectives.

· Lead design development, implementation, and handover.

· Review and ensure technical compliance with client requirements.

· Coordinate with internal teams like Civil, Archi, Electrical, Process, and Piping.

· Manage project costs, budgeting, and tender documentation.

· Chair sub-contractor progress meetings and client weekly meetings.

· Mentor and train junior engineers.

· Ensure compliance with quality assurance and safety standards.

What you'll need to succeed

· Bachelor's/Master's Degree in Mechanical Engineering or related field.

· 6-8 years of relevant experience in design and construction, preferably in industrial buildings, life sciences, and pharmaceutical sectors.

· Strong technical expertise and leadership skills.

· Excellent communication, coordination, and problem-solving abilities.

· Ability to work independently and as part of a team.

· Familiarity with industry standards, regulations, and best practices.

What you'll get in return
You'll be offered career development opportunities, succession planning and on the job training will definitely be given to you. You’d also have an amazing team supporting you throughout your career.

What you need to do now
If you feel like you meet the above requirements or know someone who does, then click on the link to apply, or you may send your application/referral directly to me at [email protected].

If this job isn't quite right for you but you are looking for a new position, please contact me for a confidential discussion on your career.

EA Reg Number: R24121320 | EA License Number: 07C3924 |Company Registration No: 200609504D

• Responsible for developing and managing the Project Work Schedule, encompassing building works, M&E, and Process Systems from design through construction and installation to testing and commissioning
• Estimate the duration and resource needs for each major construction activity
• Prepare technical submissions for all tender proposals and assist in site planning, work scheduling, and monitoring site implementation progress

Requirements:

• Diploma in Construction Management/Civil Engineering or equivalent
• At least 4 years of Site Planning/Management experience
• Proficient in Primavera

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24125585

Assist with infrastructure planning and design

• Assist with the planning and design of infrastructure systems
• Assist with the documentation of infrastructure design and planning activities and decisions

Support infrastructure operations

• Perform infrastructure operations activities such as installations of infrastructure systems according to design specifications
• Align infrastructure operations with agreed service agreement standards

Maintain infrastructure

• Perform activities related to ongoing maintenance of infrastructure
• Assist with the implementation of agreed infrastructure changes and maintenance routines

Optimise infrastructure performance

• Perform ongoing tuning and optimisation of infrastructure hardware and software components such as updates and upgrades
• Participate in infrastructure development activities
• Assist with infrastructure testing and implementation
• Gather performance and data usage statistics for capacity planning and reporting
• Assist with piloting of new tools, technologies, and/or processes

Resolve incidents

• Perform problem/issue identification and resolution
• Assist with simulation of user problems to resolve operating difficulties
• Follow up with users to ensure problem has been resolved
• Recommend system modifications to reduce user problems

Requirements

• At least 6 years' of experience in the Network Management and Support Services, Unified Communication, Wirecenter maintenance
• Strong knowledge and experience in supporting Cisco Switch, Cisco Router, Fortigate Firewall, Palo Alto Firewall, ClearPass NAC, F5 VPN, IPS, WLC, Access Point and VSS/VLAN Architectures.
• Network Support in the areas of wireless, wired, VPN
• Network certifications eg CCNE, CCNA

Responsibilities

• Develop engineering designs based on project requirements, from conceptual to schematic and detailed designs.
• Carry out structural design analysis and calculations.
• Participate in the tendering processes and monitors the work of contractors and subcontractors.
• Maintain overall records of incoming and outgoing documents, drawing registers, RFI and shop drawings to ISO standard compliance.
• Assist Project Job Captains to resolve design and attend to site queries/ issues
• Review and approve contractor’s shop drawings and material submissions.

Qualifications

• Bachelor degree in Civil and Structural Engineering or equivalent
• Minimum 5 years of relevant working experience in a similar capacity.
• Positive attitude & meticulous, has an eye for details
• Good communication & inter-personal skills, team-player
• Fast learner & ability to multi-task & work independently
• Proficiency in Microsoft Excel, Microsoft Words, Powerpoint.

Job Description:

• Project execution for water and wastewater treatment system projects: desalination plants, sewage treatment plant, industrial water and wastewater treatment plant.
• Develop detailed design and P&IDs based on customer requirements and basic design.
• Review project specification to ensure company design complies with customer specifications.
• Prepare equipment datasheets (equipment data sheets, valve lists, equipment list, piping schedule, etc).
• Review and collaborate with designer/drafter to develop complex equipment skid 3D model.
• Review of supplier, fabricator and sub-contractor quotation and deliverable to ensure compliance with project specification.
• Coordination of all technical activities on assigned projects.
• Project engineering schedules and forecasts.
• Plans, schedules, conducts, and coordinates assigned project engineering work; Coordination and checking of engineering deliverables.
• Monthly project status reports and change orders.
• Monitors work for compliance to applicable codes, accepted engineering practices.
• Accountable for the successful completion of engineering projects.
• Ensures effective communication and coordination on assigned projects between all disciplines and all other project participants.
• Responsible and accountable to ensure that all assigned personnel are coordinating their activities with other project participants, and that the requirements of the Contract are being satisfied.
• Ensure that project charges are correctly represented for accounting’s closing process.

Requirements:

• Degree in Environmental, Chemical, Mechanical, Electrical Engineering.
• Candidates with knowledge of water treatment, wastewater, environmental engineering is preferred.
• At least 3-5 years of relevant experience.
• Good in verbal and written communication skills in English.
• General computer knowledge is essential (MS Word, Excel, Powerpoint, MS outlook).
• Willing and able to travel overseas frequently.

Job Responsibilities:

• Communicate with the system users to understand the scope of projects
• Collaborate with Software Developers and support teams to resolve any issues on the product
• Monitoring the product testing for applications and software systems
• Perform performance testing using automated test scripts and testing tools
• Documented defects or bugs found during testing to the Software Developers
• Responsible for the execution of manual and automated tests to verify software functionality and performance
• Working towards departmental and project deadlines
• Create and execute test scripts to ensure software quality
• Providing objective feedback to softtware developers and stakeholders

Job Requirements:

• NITEC/Diploma in Technology, Engineering, Computer Science or related field
• Preferably some experience in software/product testing
• Strong verbal and written communication skills with the ability to liaise with a variety of stakeholders
• Posses problem solving and competent technical skills
• Attentive to detail and ability to work under pressure
• Ability to communicate in Mandarin in order to commuicate with our peers from our HQ in Taiwan

Duties & Responsibilities:

Principal

• Occasionally establishes and prepares basis of design and/or estimation and design philosophy and requirements prior to execution of electrical detailed engineering works.
• Occasionally performs electrical system studies including value engineering to determine most cost-effective design but still conforms to Client requirements.
• Normally prepares key electrical engineering documents like Key Single Line Diagrams, Conceptual Layouts, Substation Layouts and, system diagrams for Fire Alarm and Communication Systems in accordance with Client and Project requirements to facilitate the execution of electrical detailed engineering works.
• Normally prepares specifications, data sheets, requisitions, technical evaluation reports and vendor data review of major substation electrical equipment in accordance with Client and project requirements and applicable codes and standards.
• Normally establishes estimation basis and prepares technical proposals for proposal projects in accordance with Client requirements and acceptable estimation and engineering practices.
• Normally coordinates with other discipline, vendors and/or sub-contractors to ensure conformity with project and Client requirements.
• Normally acts as KP of medium to large sized standard projects, exceeding 5,000 electrical engineering manhours.
• Perform discipline project control (schedule, BM/BQ & manhour) when assigned as Project Lead Engineer.
• Assists in implementation of Department training programs by functioning as a “trainer” or "mentor".
• Supports major phase of construction work, can assume responsibility as the Electrical Site Superintendent, Electrical QA/QC in charge, and Lead Field Engineer.
• Acts as the home base Lead Support Engineer when the major phase of the project has been shifted to site, such as purchasing of additional major equipment / material, coordinate / expedite vendors for the immediate supply of material exceptions, resolving major engineering conflicts within the approved specifications.
• Participates in site survey/ investigation of existing facilities to clarify feasibility of the design
• Participate in factory acceptance tests of electrical equipment to confirm suitability of equipment and ensure that the equipment is manufactured according to the agreed specifications.
• Performs other functions that may be assigned by superiors.

Competencies / Preferred Skills:

• Proficient in Microsoft Office Skills, AutoCAD and/or Microstation and common electrical calculation software.
• Familiar with local and international electrical codes, standards and regulations.
• Proficient in the design of electrical systems for oil/petroleum/industrial infrastructure industries.
• Familiar with ETAP and e-DPP software.
• Proficient in substation energization work.

Education Qualifications and other Requirements:

• Bachelor’s degree in Electrical Engineering.
• 15 years and above experience in electrical detailed engineering works of Oil & Gas, petrochemical and other related industrial plants, including five (5) or more years in frontend engineering and proposal / estimation works and additional five (5) or more years infield engineering works.

Job Description

• Well knowledge in the design of the Aluminium Formwork and System Formwork for columns, walls, beams, slabs and staircases.
• Produce drawings using CAD software.
• Assist Project Engineers with drafting RFIs when required.
• Creating accurate project specifications for structural elements with temporary propping and formwork.
• Generate technical reports upon requested.
• Examine and advise on improving formwork’s structural integrity and strengthening the formwork system.
• Communicate effectively with Project Managers through email and verbal interactions.
• Maintain records for storage material and coordinate with the fabrication team.
• Report to the HOD.

Job Requirement

• Candidate must possess at least a Diploma/Advanced/Higher/Graduate Diploma in Engineering (Civil) or equivalent.
• At least 4 Years of working experience in the related field.
• Required Skill(s): AutoCAD.
• Preferably Senior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

Job Description

• Well knowledge in the design of the Aluminium Formwork and System Formwork for columns, walls, beams, slabs and staircases.
• Produce drawings using CAD software.
• Assist Project Engineers with drafting RFIs when required.
• Creating accurate project specifications for structural elements with temporary propping and formwork.
• Generate technical reports upon requested.
• Examine and advise on improving formwork’s structural integrity and strengthening the formwork system.
• Communicate effectively with Project Managers through email and verbal interactions.
• Maintain records for storage material and coordinate with the fabrication team.
• Report to the HOD.

Job Requirement

• Candidate must possess at least a Diploma/Advanced/Higher/Graduate Diploma in Engineering (Civil) or equivalent.
• At least 4 Years of working experience in the related field.
• Required Skill(s): AutoCAD.
• Preferably Senior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

Job Description

• Well knowledge in the design of the Aluminium Formwork and System Formwork for columns, walls, beams, slabs and staircases.
• Produce drawings using CAD software.
• Assist Project Engineers with drafting RFIs when required.
• Creating accurate project specifications for structural elements with temporary propping and formwork.
• Generate technical reports upon requested.
• Examine and advise on improving formwork’s structural integrity and strengthening the formwork system.
• Communicate effectively with Project Managers through email and verbal interactions.
• Maintain records for storage material and coordinate with the fabrication team.
• Report to the HOD.

Job Requirement

• Candidate must possess at least a Diploma/Advanced/Higher/Graduate Diploma in Engineering (Civil) or equivalent.
• At least 4 Years of working experience in the related field.
• Required Skill(s): AutoCAD.
• Preferably Senior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

Job Description

• Well knowledge in the design of the Aluminium Formwork and System Formwork for columns, walls, beams, slabs and staircases.
• Produce drawings using CAD software.
• Assist Project Engineers with drafting RFIs when required.
• Creating accurate project specifications for structural elements with temporary propping and formwork.
• Generate technical reports upon requested.
• Examine and advise on improving formwork’s structural integrity and strengthening the formwork system.
• Communicate effectively with Project Managers through email and verbal interactions.
• Maintain records for storage material and coordinate with the fabrication team.
• Report to the HOD.

Job Requirement

• Candidate must possess at least a Diploma/Advanced/Higher/Graduate Diploma in Engineering (Civil) or equivalent.
• At least 4 Years of working experience in the related field.
• Required Skill(s): AutoCAD.
• Preferably Senior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

Job Description & Requirements

• Responsible for operational level understanding of the requirement of the client/customer, Site Visits, Site feasibility & Solar Systems Design and complete execution. Able to check site feasibility and provide the best suitable option for enhancing suitability.
• Designing of arrangements of the solar panels for Rooftop & Ground Mounted PV system including layouts, Single line diagram (SLD), schematic diagrams, calculation of sizing and BOQ of material. Highly experienced with Autocad.
• Drawing/Document submission/approvals, scheduling, Factory inspections, proving the guaranteed prepared a generalized check list for review of all standard. End to end execution of solar projects (Rooftop & Ground Mounted) and Service Support.
• Familiar with PV simulation software such as PVsyst and Helioscope.
• In addition to the above-mentioned duties and responsibilities, any other assignments given occasionally or daily by the immediate reporting officer

Job Requirements

• Possesses minimum Degree in Electrical Engineering/Renewable energy related field
• Minimum 1.5 year of experience in handling solar projects preferred (Fresh graduate for Junior position is welcome to apply)
• Has knowledge in electrical design concepts
• Independent and a good team player
• Analytical and organised with good problem-solving skills
• High energy with a can-do and positive attitude, thrive in a dynamic environment and deliver within time constraints
• Self-disciplined and have good organising abilities
• Strong verbal and written communication

Our client is an established Offshore Facilities and Components provider, serving the offshore energy companies, operating all over the world.

It is currently looking for a Lead Piping Design Engineer for its Singapore’s office.

Job’s Highlight:

· Global company in O&G industry

· Competitive salary

· Medical insurance included Vision & Dental insurance

· AWS/ Bonus

· Equal opportunity| conductive and productive working environment

· Location: North Buona Vista Drive| Nearest MRT Station: Buona Vista MRT

Role:

· The Lead Piping DESIGN Engineer is to have a strong background in piping design engineering, with the ability to lead and mentor a team of engineers and designers.

· The Lead Piping Design Engineer is to be conversant with widely recognized piping design requirements, codes and standards which is to be applied to Single Point Mooring (SPM), Topside and Subsea systems. Furthermore, shall be conversant in subsea pipeline design and selection, able to understand load interfaces of the subsea pipelines as well as other interfaces like soil and structural interactions.

· The Lead Piping Design Engineer is to have a strong background in piping engineering, with the ability to lead and mentor a team of engineers and designers.

· The Lead Piping Design Engineer is to be conversant with widely recognized piping design requirements, codes and standards which is to be applied to Single Point Mooring (SPM), Topside and Subsea systems. Furthermore, shall be conversant in subsea pipeline design and selection, able to understand load interfaces of the subsea pipelines as well as other interfaces like soil and structural interactions.

· The Lead Piping Design Engineer should ideally have experience of working in a shipyard environment and have shipyard experience.

Core Responsibilities:

· Technical Lead in developing Piping system design on Single Point Mooring Systems and other product offerings.

· Lead, mentor, and develop a team of piping engineers and designers, fostering a collaborative and high[1]performance work environment.

· Provide technical guidance and support to team members, ensuring adherence to industry standards and best practices.

· Conduct regular team meetings to review project progress, address challenges, and share knowledge. Manage the entire lifecycle of piping systems design deliverables, from the Tendering phase and Front-End Engineering Design (FEED) to EPC (Engineering, Procurement, and Construction) execution.

· Ensure that designs comply with project requirements and that all milestones and deadlines are achieved.

· Continuously monitor project progress, identify potential risks, and implement effective mitigation strategies to ensure successful completion of the project.

· Lead the preparation of essential PIPING SYSTEM DESIGN calculations and deliverables for EPC projects. This includes, but is not limited to, piping and instrumentation diagrams (P&IDs), piping specifications, datasheets, sizing, stress, and pressure drop calculations. Possess some knowledge of process engineering to enhance the integration and effectiveness of piping system designs.

· Oversee the entire piping system vendor requisition process, such as preparation of technical specifications and requirements, from quotation, evaluation, selection, installation, and delivery. Implement cost-saving initiatives and value engineering practices to optimize project budgets. Drive continuous improvement efforts within Piping discipline.

· Travels occasionally to sub-contractor facilities to attend Factory Acceptance Tests and fabrication support respectively.

HSEQ Requirements and Code of Conduct:

HSEQ: Complies with the client's HSEQ Code of Conduct as described in the HSEQ Policies, the 14 HSEQ Standards, and the HSEQ Procedures to always protect people and the environment. Has a duty of care to JOB DESCRIPTION ensure that all personnel work in a manner that is not harmful to their own health and safety and the health and safety of others.

Compliance: Complies with the client's Group Policy Code of Business Conduct and Ethics and expected training at all times.

Financial and Operational Dimensions/Impact and Decision-making Authority:

No budget responsibility, however commercial attentiveness is required as the role requires handling of high value equipment as well as understanding the technical selection has financial consequences.

Minimal Supervision: Objectives, priorities and deadlines are defined

Due to the safety-critical nature of handling hydrocarbons within the client's product line, meticulous attention to detail and a strong sense of technical ownership are essential for ensuring the operational safety of our facilities.

The Lead Piping Engineer must exemplify these qualities, demonstrating exceptional commitment to safety and precision in all aspects of their work.

Work Relationships:

Cultivate good working relationships with technical professionals, including engineers and designers, both within the organization and externally. External relationships include interactions with clients, contractors, and vendors.

Able to guide the development of direct reports, as well as other technical or non-technical team members.

Willing to share opinions, ideas, resources with others and provide constructive feedback and coaching. Foster commitment in the face of major obstacles.

Must be able to communicate well with all parties this role interacts with.

Job Challenges and Problem Solving:

Basic understanding of SPM (Turrets and CALM Buoys) system design aspects is required to work with the relevant disciplines to solve issues which arise. In office and out-of-office self-study of SPM systems is expected to achieve a high level of competency.

Some off-office working hours are expected to communicate with Houston Head Office for project planning and solving issues.

Requirements:

· Educational Qualification: Bachelor’s Degree in Engineering.

· 10 to 15 years relevant experience in Piping/Mechanical Engineering.

· Relevant Experience: Possess hands-on experience of at least 5 years as Lead Piping Engineer of large sized FPSO/Offshore platform/Topsides Modules projects

· Language Proficiencies in English & Chinese as he/ she needs to communicate with the Chinese speaking clients, stakeholders, vendors and staffs

· Software skills: Software: Aveva E3D, Advanced Autocad Skill, Caesar II, Microsoft Word and Excel

· Key Behaviors: Leadership, Good sense of Ownership, Communication, Commitment, Customer Focus, Team Player

· Working Conditions: Office Environment (Working Hours: 8 am to 6 pm). Possible exposure to hazards such as noise, heavy equipment, temperature extremes, chemicals, etc. if working in fabrication or installation sites.

· Can work effectively in a fast-paced atmosphere with multiple priorities and constant change.

If your experinces and expertise are not a 90% match with the JD then please refrain from applying. We regret to inform you that onlt the shortlisted profile with 90% match will be contacted.

(NB: No quotas for the foreigners.)

NB: NO QUOTA FOR THE FOREIGNERS PLEASE.

• This job vacancy is posted on the My Career Future Jobs Bank portal, which is only for the Singaporeans and Singapore PRs.
• Please contact our Recruitment Manager: Leeza Shaheed (R1770675) for further enquiries about the role @ [email protected]/ [email protected] and send your updated CV in MSWORD with the following information: Nationality, Full name, Total yrs. of exp., relevant work exp. for how many yrs., expected monthly basic salary, latest drawn monthly basic salary, availability, reason for leaving last two jobs.

Venture Cove Pte. Ltd.

(EA License # 21C0547| UEN: 202103896W)

138 Robinson Road, Singapore 068906

Website: http://www.venture-cove.com/

UWCSEA Dover has a vacancy for August 2025 for a Teacher of High School and Middle School Design Technology.

The successful candidate must be experienced and passionate about teaching Design and Technology. The role will include teaching both High School and Middle School aged students in curriculum areas such as Product Design, Food Technology, Electronics and Digital Design. At UWCSEA we offer our own bespoke Design Technology and Food Technology courses in Middle School and in Grades 9 and 10. We offer the IB Diploma, Design Technology courses at Higher and Standard Level, in Grades 11 and 12.

The Design Technology Department is composed of a team of enthusiastic and dynamic teachers who work in a very well ­resourced environment for learning. Teaching takes place in dedicated and well resourced Design Technology classrooms and is supported by skilled technicians.

Main Responsibilities

• Teachers should be willing to contribute positively to the collaborative culture of the Design Technology department and broader Middle and High School teams.
• Teachers should construct learning experiences that challenge and inspire students, support the diversity of learners in each classroom and demonstrate a strong commitment to concept-based teaching and learning.
• Teachers should ensure assessments support ongoing learning and provide timely, relevant, and appropriate feedback to students on formative and summative assessments.
• Teachers should demonstrate effective classroom management that shows an understanding of the academic, social, and emotional dimensions of learning.
• Teachers should keep parents informed about the learning of their children, and be proactive in communication with parents.

Expectations and Standards

• Follow the UWCSEA Professional Code of Conduct and Safeguarding Code of Conduct.
• Teach in line with the UWCSEA Teacher Standards

Person Specifications

• A good degree in Design and Technology or a closely related discipline and a recognized teaching qualification or certification are expected.
• Previous experience of teaching Design and Technology in the 11-18 age range is required.
• Teachers should be willing and eager to participate in the five key elements of a UWCSEA education: Academics; Activities; Outdoor Education; Personal and Social Education, and Service.
• Academic expectations include enthusiastic participation in Professional Learning.
• Pastoral expectations include the leadership of a Mentor group.
• On average the College expects a yearly contribution of two sessions per week in each season to Activities and/or Service.
• The College expects that teachers will participate enthusiastically in the curricular Outdoor Education experiences which are relevant to their students and will also occasionally volunteer for holiday Outdoor Education trips.
• A commitment to diversity and inclusion is essential alongside a willingness to adapt and develop pedagogy to meet the needs of our learners.

Applications

The UWC Mission is to make education a force to unite people, nations and culture for peace and a sustainable future. We are committed to creating a community in which all members feel safe and secure, and know that their authentic selves and individual differences are accepted with respect and care. At UWCSEA, we acknowledge that diversity, equity, inclusion and justice (DEIJ) is an ongoing and evolving process and strive to create and sustain a sense of belonging for all members of our community, past, present and future. All qualified applicants, including those who identify as a part of marginalized group(s) and individuals with (dis)abilities are all encouraged to apply. Our school is committed to safeguarding and promoting the welfare of all the students in our care and expects all applicants to share this commitment. We follow safe recruitment practices and all appointments are subject to interview, satisfactory references, identity and criminal record checks.

• Setup and troubleshooting of semiconductor equipment and record engineering improvements for future reference
• Build procedures for assembly, inspection and testing of equipment

Requirements:

• Diploma in Mechanical/Mechatronics Engineering
• At least 2 years of experience in setting up automation equipment
• Knowledge of Electro Mechatronic System

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Founded in 2012, ByteDance's mission is to inspire creativity and enrich life. With a suite of more than a dozen products, including TikTok as well as platforms specific to the China market, including Toutiao, Douyin, and Xigua, ByteDance has made it easier and more fun for people to connect with, consume, and create content.

Why Join Us

Creation is the core of ByteDance's purpose. Our products are built to help imaginations thrive. This is doubly true of the teams that make our innovations possible. Together, we inspire creativity and enrich life - a mission we aim towards achieving every day. To us, every challenge, no matter how ambiguous, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always. At ByteDance, we create together and grow together. That's how we drive impact-for ourselves, our company, and the users we serve. Join us.

About the team

ByteDance and affiliate are developing the next-generation high-performance analytical database, with a mission to enable efficient and real-time data-driven decision-making on PB-level data sets. The initial product was forked from Clickhouse, after which large re-architecture had been taken place. The product now not only improves the efficiency of Clickhouse but also fits into the elastic cloud-native infrastructure with better scalability and resource utilization. With years of polishment in the internal EB-level scenarios, we are now ready to serve our business partners via various cloud vendors.

What you will be doing:

- Responsible for quality assurance of data and cloud products, and R&D efficiency improvement.

- Participate in product requirements and architecture design reviews, assess the rationality of the overall technical architecture and related testability.

- Ability to identify system risks in an all-around way, and ensure the stability of the systems through functional testing, performance testing, online monitoring, and other testing approaches.

- Build a data quality assurance system to ensure delivery quality and improve delivery efficiency throughout the entire process.

- In-depth understanding of the business, communicate and collaborate with various roles across teams, to create value for the business in an all-round way, without setting boundaries for work.

- Design and perform tests and check cases to determine if infrastructure components, systems and applications meet confidentiality, integrity, authentication, availability, authorisation, and nonrepudiation standards.

- Translate requirements into test plan, write and execute test scripts or codes in line with standards and procedures to determine vulnerability to attacks.

- Certify infrastructure components, systems and applications that meet security standards.

Qualifications

Minimum Qualifications:

- Bachelor's Degree or above, Computer Engineering, Mathematics, Statistics, Machine Learning, and other related majors

- At least 3 years of data testing experience

- At least 2 years of experience in managing a team

- 2 years experience in one or several of the following programming languages: C/C++/ Java / Go/ PHP/Linux shell/ Python.

- Solid understanding of distributed systems

- 2 years experience with UI and API automation testing and framework.

- 2 years experience in common big data technologies such as Hadoop, Spark, Hive, etc.

- 2 years experience in testing high-traffic distributed systems, and cloud-related products.

- Sensitive to data, with good logical thinking ability, analytical ability, troubleshooting skills, and business understanding ability.

Preferred Qualifications:

- 5 years of data testing experience

- 5 years of experience in managing a team

- 5 years experience in one or several of the following programming languages: C/C++/ Java / Go/ PHP/Linux shell/ Python.

- 5 years experience and solid understanding of distributed systems

- 5 years experience with UI and API automation testing and framework.

- 5 years experience in common big data technologies such as Hadoop, Spark, Hive, etc.

- 5 years experience in testing high-traffic distributed systems, and cloud-related products.

ByteDance is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At ByteDance, our mission is to inspire creativity and enrich life. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Quantitative Trading Engineer / Quantitative Researcher

Working day: Monday to Friday, 9am to 6.30pm

Working location: Raffles Place

Salary: Discuss during interview

Responsibilities

Strategy Development:

• Use AI technologies such as machine learning and deep learning to intelligently optimize investment strategies and improve the performance of strategies in actual transactions.
• Extract predictive signals from financial data through both traditional statistical analysis methods and cutting-edge machine learning techniques.
• Formulate and apply mathematical modeling techniques to enhance existing trading strategies and perform innovative new research with the goal of identifying and capturing trading opportunities.

Data Analysis：

• Collect and analyze large financial datasets (market data, news, social media, etc.).
• Work with large data sets to predict and test statistical market patterns, combining knowledge of systems, mathematical techniques, and trading to identify the best places to improve the trading system.
• Build and optimize feature engineering pipelines to improve model prediction accuracy.

Financial Modeling:

• Construct, back-test, maintain, and improve financial models to support trading activities.
• Conceptualize valuation strategies, develop, and continuously improve upon mathematical models and help translate algorithms into code
• Conduct research and statistical analysis to build and refine monetization systems for trading signals
• Optimize the order execution and risk management of our trading system
• Create robust solutions to problems presented in the trading environment
• Build regression, classification, reinforcement learning and other models for market forecasting and trading decisions.
• Tuning the model's hyperparameters to improve model performance and stability.

Strategy backtesting and real-time testing:

• Backtest historical data to evaluate the strategy's yield, volatility, drawdown and other indicators.
• Deploy the strategy to the real-time environment, track performance and continuously optimize.

Requirements

• Master’s degree or above in Statistics, Mathematics, Applied Mathematics, Computer Science, Financial Engineering or equivalent.
• At least 2 years of experience in quantitative trading and machine learning modeling.
• Proficient in programming languages ​​such as Python, C++, Java, etc.
• Familiar with common machine learning frameworks such as TensorFlow, PyTorch, Scikit-learn.
• Familiar with quantitative trading systems, data flows and algorithms.
• Deep understand the structure of financial markets and be familiar with markets such as virtual currencies, stocks, futures, and foreign exchange.
• Experience in large-scale data processing, proficient in using SQL, NoSQL, Hadoop and other tools.

Bonus Skills

• Experience in developing high-frequency trading strategies will be an advantage.
• Participated in AI competitions (such as Kaggle) or published papers in top conferences (such as NeurIPS, ICML) will be an advantage.
• Familiar with cutting-edge AI technologies such as reinforcement learning, and generative adversarial networks (GANs) will be an advantage.

• Handle the Precast Concrete Production in the factory.
• Understand the design drawings and production drawings and conduct quality check.
• Liaise with all the relevant parties for production and inspection of the factory.
• Manage the Suppliers and Contractors to rectify if there are any defects prior to delivery to site.

Requirements:

• Diploma in Civil Engineering or equivalent
• At least 4 years of PPVC and/or PBU Production control experience.
• Proficient with ICTs, Digital Progress control/monitor.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Overview

QUALCOMM Technologies Inc. is the world leader in supplying integrated circuit solutions for cellular wireless standards and is the number one fabless semiconductor company. QTI is driving the next phase of wireless evolution and expanding quickly into adjacent IOT, Automotive, and Computing markets with advanced silicon/VLSI R&D. Engineer will be responsible for characterization and developing cost-effective manufacturing test solution for DDR memory subsystem within Qualcomm leading-edge SoC products in the most advanced processes. These include but not limited to memory controllers, PHY, IO pads, DDR SDRAMs test with automated test equipment (ATE). Engineer will be developing Characterization and Test Plans, identifying DFT and test hardware requirements, ATE tests/routines/programs to execute test plans, driving first silicon debug to qualify designs fabricated at external foundries, performing technical data analysis of parametric performance, driving failure analysis to completion, analyzing high volume manufacturing yields and driving test time reduction. Engineer with be working with IC design, system engineering and Hardware applications engineering in a time critical environment across the globe. The individual selected for the position, needs to be proactive, able to work in a fast-paced dynamic environment, enthusiastic to work as well as be passionate about delivering quality work.

All Qualcomm employees are expected to actively support diversity on their teams, and in the Company.

Minimum Qualifications

· Bachelor's degree in Engineering, Computer Science, or related field.

Preferred Qualifications

· Master's Degree in Electrical Engineering.

· Knowledge of Electrical/Electronic engineering fundamentals, digital, analog, mixed-signal and VLSI.

· Experience working in both Windows and Unix/Linux operating system.

· Knowledge of computer programming fundamentals (C/C++/Java/Perl)

· Knowledge of DRAM and DDR controller/PHY/IO ATE testing is a plus.

· Knowledge of statistical concepts, analysis and techniques.

· Knowledge in test automation development/scripting/debugging is a plus.

· Strong verbal and written communications skills.

· Independent, initiative and ability to overcome technical challenges.

· Good organization and documentation skills.

Key Responsibilities:
Provide day-to-day technical support and maintenance services, including troubleshooting and problem resolution
Monitor and maintain IT infrastructure, including servers, networks, and software applications
Assist in the implementation and upgrade of new IT systems and solutions
Communicate with vendors and clients to ensure technical needs are met
Write and update technical documentation and operation manuals
Participate in project planning and execution to ensure project goals are met on time
Track and report IT support incidents and problem resolution progress
Continuously learn and update technical knowledge to stay industry-competitive

Basic Requirements:
1-2 years of relevant work experience
Diploma in Computer Science, Information Technology, Computer Engineering, or a related major

-------------

Send me your resume via WhatsApp ❤

WhatsApp: (https://api.whatsapp.com/send?phone=6592377799)

I regret to share that only shortlisted candidates will be notified. www.dadaconsultants.com

EA Registration Number: R22108564

Data provided is for recruitment purposes only

Business Registration Number: 201735941W.

Licence Number: 18S9037

Details of the Division and Team:

• Join a talented and passionate team of solution-oriented Network engineers.
• As a Level 2 Network Operations Engineer in Global Network Services, you will be exposed to industry leading SDN, DCN, Cloud and Security technology.
• Your responsibilities include support of a robust and resilient network infrastructure which enables Deutsche Bank’s 24x7 client centric business.
• You will work with global colleagues to identify, diagnose, troubleshoot, resolve network problems, implement improvements, train colleagues, and help to leverage technology to provide secure, stable and innovative connectivity to Deutsche Bank and its clients.
• Represent Global Network operations during network and non-network incidents in incident management calls.

What we will offer you:

A healthy, engaged and well-supported workforce is better equipped to do their best work and, more importantly, enjoy their lives inside and outside the workplace. That’s why we are committed to providing an environment with your development and wellbeing at its center.

You can expect:

• Flexible benefits plan including virtual doctor consultation services
• Comprehensive leave benefits
• Gender Neutral Parental Leave
• Flexible working arrangements
• 25 days of annual paid leave, plus public holiday & Flexible Working Arrangement

Your key responsibilities:

• Facilitate proper operation, maintenance, and restoration of global data network.
• Follow key operation procedure to progress and update Incident and change tickets
• Implement regular break fix related changes
• Acts as an internal training resource to tier 1/2 operations engineers.
• Participate in effective handovers between APAC and US L2 operation teams.
• Perform timely escalations to technical and management teams and engage vendor escalation services (Cisco TAC, Checkpoint, F5, Arista, DWDM, Fortinet, Akamai, McAfee)
• Provide detailed written summaries of Incidents.
• Act as shift lead
• Lead as Network Operations representative in managed incident calls.
• Discuss issues with management, Level 3/Advanced Services and Engineering.
• Serve as Subject Matter expert

Your skills and experience:

• Minimum 6 years of relevant experience as a Level 2 network engineer in enterprise grade networks.
• Hands-on experience in extensive Level 2 and 3 troubleshooting network problems pertaining to IP routing and network protocols.
• Understanding of TCP/IP, DNS, DHCP, GTM, LTM VPN, MP-BGP, OSPF Cisco ACI, Wireless technology; DWDM (ADVA), Multicast, HSRP, Spanning tree, VRF and DDOS, IP services (DNS/DHCP) proxies.
• CCNP or other professional level certifications.
• Technical ability to troubleshoot and progress complex IP networks and hardware problems.
• Liaison with Operations Level 1 Engineer, Operations Level 3 Engineer, other IT groups regionally and globally for support and resolution of high priority incidents.
• This role requires you to work in a 12-hour day shift. 4 days work, followed by 4 days off.

Role is required to be performed on-site at One Raffles Quay office. Relevant vaccination requirements may apply

How we’ll support you:

• Coaching and support from experts in your team
• A culture of continuous learning to aid progression
• A range of flexible benefits that you can tailor to suit your needs
• Training and development to help you excel in your career
• Coaching and support from experts in your team

About us and our teams:

Deutsche Bank is the leading German bank with strong European roots and a global network. click here to see what we do.

Deutsche Bank & Diversity

We strive for a culture in which we are empowered to excel together every day. This includes acting responsibly, thinking commercially, taking initiative and working collaboratively.

Together we share and celebrate the successes of our people. Together we are Deutsche Bank Group.

We welcome applications from all people and promote a positive, fair and inclusive work environment.