Introduction to GoNetZero™

GoNetZero™ empowers clients worldwide to achieve their net-zero goals. As a global decarbonisation solution provider, it offers comprehensive end-to-end solutions through its digital platform and verified environmental attributes (EAs), including Renewable Energy Certificates and carbon credits. It is the carbon management business of Sembcorp Industries, a Singapore Stock Exchange-listed company.

GoNetZero™’s suite of digital solutions includes Measure – which enables clients to begin their net-zero journey by assessing their organisations’ emissions; Manage – which allows clients to view, manage, and retire their EAs portfolio seamlessly on a single platform; and Perform – which helps clients maximise the output and lifespan of their renewable energy assets across multiple sites on a single dashboard. Additionally, GoNetZero™ provides custom solutions tailored to clients’ decarbonisation needs.

Since its launch in 2022, GoNetZero™ has supported over 80 clients globally through its established offices in Singapore, the UK, and Vietnam.

Key Responsibilities

• Travel extensively across Malaysia and occasionally to regional sites for installations, maintenance, and support sales.
• Conduct technical site qualifications to assess system requirements, project scope and site conditions.
• Setup, configure, and commission solar monitoring hardware on-site.
• Perform network setup and troubleshooting to ensure reliable communication between solar monitoring systems and communications equipment.
• Interact with customers professionally as part of a multi-tasking team.
• Perform onsite installations, repairs, and troubleshooting of solar PV monitoring system.
• Check and provide complete documentation, including installation reports, to clients.
• Conduct root cause analysis and troubleshoot issues related to system performance.
• Investigate technical failures and prepare formal technical reports with recommendations.
• Record keeping and management of spare part movements.

Required Skills & Experience

• Minimum 2+ years of technical experience in the solar industry.
• Degree in engineering or a related technical field.
• Experience in setting up and configuring solar monitoring hardware and associated systems.
• Experience with network setup and troubleshooting, particularly for remote monitoring of solar assets.
• Ability to work on rooftops and at heights
• Willing to travel regularly within the region, most commonly within Malaysia
• Ability to read and interpret single-line diagrams, schematics, and other electrical drawings.
• Cable jointing qualifications and experience are also an advantage.

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset - Put the interest of the Group ahead of individual interests.
• Collaboration - Deliver through collaborating across markets, businesses and functions.
• Accountability - Hold team and self accountable to deliver on our commitments.

Working Location: 30 Hill Street Singapore 179360

This is a 100% in-office position. The successful candidate must be available to work from our corporate office during regular business hours.

As the world’s leading vendor of Cyber Security, facing the most sophisticated threats and attacks, we’ve assembled a global team of the most driven, creative, and innovative people. At Check Point, our employees are redefining the security landscape by meeting our customers’ real-time needs and providing our cutting-edge technologies and services to an ever-growing customer base.

If you want to make the world a safer place – you belong with us.

You will be responsible for:

• Provide accurate and creative solutions to end-user problems to ensure their satisfaction.
• Troubleshooting, diagnosing and resolving hardware, software, and other network problems related to Check Point.
• Constantly monitor security devices and applications for performance problems and provide troubleshooting support for clients. When issues arise, they must analyze the root cause and resolve them promptly or else escalate them to another department while updating clients all throughout.
• Standards and policies are extremely important when it comes to network security, and firewall engineers should be aware of these, keeping abreast of changes and defining processes for compliance.
• Research, resolve and respond to questions received via telephone calls and web-based interface in a timely manner, in accordance with current standards.
• To recognize the importance of customer focus and/or of serving the needs of the end-user.
• Monitoring network performance to determine if adjustments need to be made.

What you bring to the table:

• At least 1-3 years of experience in Networking
• Holding a degree in Computer Science, Engineering or relevant discipline -
• Excellent communication skills – both written and verbal
• An ability to learn new technologies quickly
• Strong documentation skills
• CCNA/CCNP/CCSA or any other Network Certification will be an added advantage.

What you'll get in return

• Exposure to exciting and award-winning technologies in the Cyber Security industry
• Meet the people behind our cutting-edge technologies during our New Hire Training
• Work with and build long-lasting relationships with a team of brilliant people.

Description

• Arranges necessary facilities and instruments for jobs such as meters, test kits, temporary preparations, shore generators, and load banks. Performs testing and commissioning activities and ensures that proper documentation is approved and signed. Supervises and deploys manpower to execute the operational tasks. Ensures that electrical equipment and switchboards meet the purchase specifications, and arranges for protection and maintenance of the electrical system.
• Reviews commissioning work processes to enhance efficiency and productivity. Liaises with owners, class surveyors, and government bodies pertaining to project requirements. Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department, and vendors. Plans and schedules the testing and commissioning requirements based on project basis, and organizes all logistics requirements for major operations. Performs any other assigned duties and responsibilities.
  
  Requirements:
  
• Diploma in Electrical Engineering or related Engineering Disciplines.
• Min. 4 years of related work experience working on FPSOs. Possess working experience related to testing of LV/MV Switchboards, power generators, DCS/ICSS interface for PMS system. Capable of testing and calibration of Electrical switchboard and its components, troubleshooting, and clear understanding of system specification and class requirements. Familiar with the testing procedures and applicable rules and regulations of regulatory bodies.

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

This position will have responsibility for providing process support and installation of new plasma etch / clean / deposition systems at customer sites. This includes design, evaluation and documentation of process window for new installations or Lam recommended field hardware modifications / upgrades

1. Work closely with Account team and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues / challenges. Identify areas where Lam is able to value-add.
2. Work with Account team and customers to execute to penetration and defense strategy, including co-ordinating with Global Product Group on product demonstration
3. Perform startup of “capacity add” Lam systems i.e. match results to existing systems and applications
4. Design and complete simple DOE evaluations to characterize process window for new installations or Lam recommended field hardware modifications / upgrades
5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution
6. Develop new processes to new and/or existing customer applications
7. Professionally represent the company to the customer. Utilize knowledge of company’s product lines and service to keep existing / potential customers informed when new/additional needs are identified
8. Develop good customer relations during start-up and trouble-shooting
9. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
10. Ensure safe working condition at work site
11. Any other duties as assigned by the Immediate Supervisor

Job Requirements:

1. Engineering degree or Bachelor of Science (in Chemistry / Physics) or equivalent
2. Systematic and has an analytical mind
3. Good communication and interpersonal relations skill
4. Able to actively engage customers on technical solutions
5. Able to work in Fab environment and perform standby duties

Responsibilities

• Provide technical support to end-users on various technical issues and problems relating to hardware and software as well as network connectivity in the organization (e.g., desktop/laptop computers, printers, scanners and Smart Phones) and software such as Microsoft Office and emails.
• Setup and deploy new desktop / laptop computers and the associated software, including Windows Active Directory (AD) administration.
• Support service request and incident management to provide quality end-user services.
• Perform ad-hoc root cause analysis and problem resolution.
• Ensure and follow standard IT service delivery processes in accordance with IT policies and procedures.
• Develop checklists for typical problems.
• Assist his/her immediate supervisor in the definition methods for issue resolution and prevention.
• Perform other duties as assigned.

Requirements

• Diploma in Information Technology, Computer Engineering or equivalent, with at least 1 year experience and have handle VIPs experience.
• Proficient with Windows operation systems, M365, Anti-virus software and etc.
• General technical troubleshooting on IT hardware and software products (Desktops, Laptops, Printers, Audio, Projectors & etc)
• Handling incident tickets from end user for IT matters.
• Experience in supporting Microsoft Active Directory and DHCP will be an added advantage.
• Possess excellent interpersonal skills, resourceful, analytical, problem-solving and communication skills.
• A motivated person with the ability to work independently, a good team player and goal oriented individual.
• 5 days from 830am to 530pm, Bedok.
• Job Reference: LRW46496

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Kindly email your resume in a detailed Word format to [email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

Tel: 6950 9754

EA Registration Number: R22110899

EA License number: 02C4944

EA Personnel: Celeste Wong Xin Yann

You belong to the top echelon of talent in your field. At one of the world's most iconic financial institutions, where infrastructure is of paramount importance, you can play a pivotal role.

As an Infrastructure Engineer III at JPMorgan Chase within the Infrastructure Platforms team, you utilize strong knowledge of software, applications, and technical processes within the infrastructure engineering discipline. Apply your technical knowledge and problem-solving methodologies across multiple applications of moderate scope.

Job responsibilities

• Engage hands-on database administration matters such as Queries, Query optimization and managing complex procedure

• Implement database backup and recovery procedures using Oracle RMAN, ZDLRA appliances

• Perform database tuning and optimize queries and stored procedures

• Deliver database consulting work to the internal customer base across all the lines of business within the firm

• Perform minimal downtime database migration for large, complex database, covering both homogeneous and heterogeneous environments

• Build strong relationships and serve as a trusted advisor to application development teams, enabling them to accelerate cross-cloud modernization efforts and achieve successful outcomes

• Work closely alongside database product engineers and database support to deliver an integrated service and seamless experience to internal application developers

• Demonstrate initiative to drive progress across multiple concurrent assignments, from small to large scale

Required qualifications, capabilities, and skills

• Bachelor’s Degree in Computer Science or equivalent

• 3+ years of experience or equivalent expertise troubleshooting, resolving, and supporting Database services

• Strong knowledge in Oracle database architecture and administration

• Strong expertise on at least one of the following database technology - AWS RDS, AWS Aurora, Oracle Exadata, Microsoft SQL Server, MySQL, Postgres, Cassandra

• Understanding in Data migration, data streaming tooling (e.g. Oracle Goldengate or Pentaho), database security, and encryption practices

• Basic experience with Unix systems and shell scripting

• Passion in developing infrastructure engineering knowledge of additional domains, data fluency, and automation knowledge

• Experience with multiple cloud technologies with the ability to operate in and migrate across public and private clouds

To apply for this position, please use the following URL:

https://ars2.equest.com/?response_id=a794827f0405f93d1b750583cd33295d

Title: End User Ops

Perm

Responsibilities:

• Provide DevOps-level support for MobileIron, Intune, Remote Access, and other end-user platforms.
• Support Windows 11/Intune environments with 3-5 years of experience.
• Manage incidents, outages, and problem resolution for critical services.
• Collaborate with Tier 1 and Tier 2 Service Desks, vendors, and engineering teams for escalated issues.
• Oversee access management, compliance, and governance for service platforms.
• Coordinate disaster recovery events and service improvement plans.
• Troubleshoot and resolve Intune-related issues, including device compliance and connectivity.
• Perform patching, autopilot updates, and driver/firmware servicing.
• Support over 150,000 mobile endpoints and drive transitions to future platforms.

Requirements:

• 3- 5 years Strong experience with Microsoft Intune, mobile device management, and troubleshooting.
• Knowledge of Windows, iOS, and Android operating systems.
• Proficiency in PowerShell scripting and Intune Graph API is a plus.
• Excellent communication, collaboration, and problem-solving skills.
• ITIL/DevOps experience and relevant certifications are advantageous.

(EA:20C0196)

R22108971

Job Description:

• Perform site planning, coordination & inspection relating to the construction project so as to ensure that project completion timeline, requirements and budget are met
• Assist in the implementation of project operations to comply with ISO 9001; 14001; 45001 standard requirements, documented procedures as well as client, companies, authorities’ requirements
• Update the progress of structural works in the Progress Reports
• Assist in commissioning including coordination structural engineering
• Maintain the proper documentation of inspection forms and other follow-up inspections from RE
• Support Quantity Surveyors in conducting site measurement and inspections
• Liaise with sub-contractors, suppliers and clients
• Work under the advice of the Safety Officer to adhere to compliance & safety requirements with regulatory and industry standards during the construction phase
• To ensure works are in compliance with quality procedures and within standard workmanship requirements

Requirements:

• Minimum Degree in Civil Engineering (recognized by PE Board of Singapore)
• At least 3 years of local relevant experience in Construction industry; HDB or LTA preferred
• Good analytical, communication and interpersonal skills

Suitable candidates are encouraged to apply this position via Apply Now button or email to [email protected]

Only shortlisted applicants will be notified.

We are looking for Senior Data Engineer to join Data Engineer team squad. You will be responsible for platform administration, operational support, small change and release management. Larger, more complex changes are delivered by an L3 squad and project teams.

Key Responsibilities:

Release Management and Support activity (~60%):

· Assist the team with Production code deployment and data platform support

· Act as a gatekeeper Production following JERAGM’s change management process.

· Support production data pipelines and reports.

· Provide detailed analysis of data issues in Production with a quick turnaround time.

· On occasion, provide support for applications in Public Holidays and in weekend releases.

· Compile and present monthly Ops reports.

· Help the Data Engineering Manager by sharing evidence based on data-driven analysis.

· Set up security for end users when required.

Data Engineering (~40%):

· Design and deliver data solutions using an agile, iterative approach based on Scrum.

· Develop high quality data pipelines using Spark, Python, SQL and Azure services.

· Collaborate with the Data Engineering Manager on technical architecture and design.

· Analyse and estimate IT changes, providing input on technical opportunities, constraints, and trade-offs.

· Create documentation and present to both technical and non-technical audiences.

· Handover 1st line support to the JERAGM IT Ops teams and 2nd/3rd line support to the L2 squad.

· Conduct detailed testing for development activities and demonstrate results according to the delivery methodology and coding standards.

· Create complex charts and reports using Python libraries, Databricks, and Power BI.

Technical Skills

· 8 plus years of relevant experience.

· Strong proficiency in writing complex SQL Queries, Stored Procedure etc.

· Proficient in Python, or the ability to learn basic Python for the interview process.

· Experience with Azure or a willingness to learn and deepen knowledge of Azure platforms.

· Exposure to Azure Databricks, or an eagerness to gain experience working with Databricks.

· Experience orchestrating data pipelines using Azure Data Factory or SSIS.

· Knowledge of Python packages such as Pandas, Numpy, and Seaborn.

· Understanding of Big Data, MapReduce, Spark, and file formats like Parquet, Avro, and ORC.

· Familiarity with reporting tools such as Power BI or Tableau.

Support:

· Experience in a support role with experience using JIRA or similar tools to track issues and manage them through a small team.

· Experience managing releases under a change control process.

· Experience of communicating with users and other stakeholders.

Software engineering and delivery:

· Source code management e.g. Azure DevOps, Git

· Agile delivery methodologies such as SCRUM or Kanban

Job Requirement:

• Degree in Civil/Structural Engineering.
• Recognized by PEB Board/IES.
• Must have at least 2 years of related experience.
• Proficient in Microsoft Office and AutoCAD.

Responsibilities:

• Responsible for all on-site technical and engineering matters.
• Determines project schedule by monitoring project progress, coordinating activities, resolving site problems.
• Prepares project status reports.
• Coordinates structural details and design features within the project.
• Flexible and able to work well in a fast-paced environment.
• Ensure works carried out meet Company's quality standard and contractual requirements.

$2,400 to $3,400
5 days
9am - 6pm
Office location: Bukit Batok
Working location: Singapore Islandwide - Client site

Requirements

• Candidate to possess with a ITE, Diploma, Advanced / Higher / Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Computer / Telecommunication), Engineering (Electrical / Electronic) or equivalent.
• On job training provided

Job description:

• Works with engineering, sales, and ops staff to understand standard component fabrication techniques, standard composite materials to use, and current demands of our customers to formulate design details for the sales staff and our customers.
• Responding to requests for technical queries with detailed analysis of the building management system, planning of project schedule and execution.
• Handle ACMV related equipment controls including control logic programming.
• Check and ensure all installations conform to project specifications, and be able to manage system applications, drafting, database generation and commissioning of the systems.
• Effective handling of project reviews and handling by conducting FAT(Factory Acceptance test), SAT(Site Acceptance Test).

Chin See Min Reg No. : R22107450

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

Work Location: Ang Mo Kio

You will be part of a development team to develop, test and deploy system/network infrastructure as part of an overall project implementation.

Job Description:

• Design, build, and maintain AWS infrastructure using infrastructure as code (IaC) tools like GitLab, Terraform, Sentinel and Ansible.
• Improve efficiency and robustness of Control Tower/Landing Zone pipelines, workflows, Lambda functions and CloudFormation stacks/stacksets.
• Improve operation excellence and efficiency by automating routine tasks using AWS native tools like AWS Lambda, Step Functions, and AWS Systems Manager.
• Collaborate with Enterprise Application engineers to ensure that automation tasks are aligned with business requirements.
• Troubleshoot and debug issues related to AWS resources and infrastructure.
• Implement security measures to protect AWS resources.

Requirements:

• 3-5 years of relevant working experience
• Strong technical knowledge on RHEL or Windows Operating System
• Proficient in automation tools like AWS Lambda, Step Functions, and AWS Systems Manager
• Experience in CI/CD and Infrastructure as Code tools like Gitlab, Terraform, CloudFormation and Ansible
• Familiar with scripting languages like Python, Bash, and PowerShell
• Knowledge of security best practices in AWS
• Cloud certification (AWS / Azure / GCP) will be advantageous
• Knowledge in Active Directory, Public Key Infrastructure or Networking will be advantageous

To Apply or find out more information on this role, please email us or send in your updated resume to: [email protected]

Shelly Tan Bee Leng (Reg. No. R2199458)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Job Summary:

As a Principal Piping Engineer, he/she shall act as key person of the project as designated by Piping Department Manager and performs the function inherent to this position. Responsible for the preparation of major piping layout, MTO sketch, and 3D CAD model review on piping system, equipment and structure, and interference detection. Has the technical responsibility for interpreting and evaluating stress/ vibration result, for reviewing piping layout, and piping information. He/She will also be responsible for reviewing piping engineering progress against approved schedule, for evaluating changes and taking corrective action when required, for providing technical guidance, and for organizing, executing and coordinating these responsibilities to ensure timely completion and meets project schedule and budget.

Duties & Responsibilities:

• To study ITB, project and design basis such as scope of work, overall project schedule, basic design data, client specification, client standard drawings, existing drawings, and plot plan.
• To assist in planning and organizing piping engineering activities and manpower requirement for the project.
• To assist in developing piping engineering and design schedule, manpower requirements, manhour distribution and execution plan based on the scope of work and approved budget manhour/schedule.
• To coordinate piping design and engineering effort with other area Lead Engineers and disciplines of the project.
• To prepare piping information list and layout and document list following standard procedure created for the project.
• To prepare piping general specification inclusive of specification for piping arrangement, piping support standards.
• To interpret and evaluate stress/vibration analysis result and provides necessary recommendation on resolving the method of analysis.
• To develop conceptual routing, piping layout and piping information of major critical equipment of the project such as tower/column, airfin coolers, heaters, compressors and reactors, preferably in 3D CAD format.
• To check and review all work such as piping layout and information prepared by Engineers, 3D model, MTO, BQ and other deliverables of the project for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
• To check and review piping material specification (line classes), specifications/requisitions for bulk and special piping components, vendor quotation evaluations and verifications of vendor documents and piping material take-off prepared by engineers for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
• To provide field engineering support/advice towards piping installation and testing at construction site.
• To perform the function inherent to Piping Key Person as designated by Piping Department Manager.
• To evaluate the performance of and provide counseling and guidance to members of the project.
• To identify and recommend training programs including cross training of piping staff within the team in collaboration with the Department Manager.
• To prepare lesson learned upon completion of the project and recommend preventive actions to avoid recurrence on future projects to Piping Design Supervisor.
• To perform other tasks that may be assigned by the Department Manager.
• To carry out engineering support work during the construction phase of the project.

Requirements:

Education:

• Bachelor Degree of any four years BS Engineering course preferably Mechanical Engineering or at least fifteen (15) years related experience and/or training; or equivalent combination of education and experience.
• Minimum of twelve (12) years in the field of piping design involving detailed design, stress evaluation, production work, 3D model review, and construction engineering support, five (5) years of which in a supervisory capacity.

Skill Requirements:

• Good Knowledge of AutoCAD.
• Basic knowledge of 3D Model review through Naviswork or SPR.
• Interpretation of stress/vibration analysis report.
• Ability to read, analyze, and interpret common technical information, contracts reports and instructions.
• Ability to respond to common inquiries or complaints from clients and ability to write effective minutes of meeting and other related business communications.
• Strong leadership qualities and analytical and reasoning abilities.
• Good interpersonal and communication.

Interested parties, please send in your detailed resume.

Job Summary

Responsible for the execution of process design involving preparation of calculations and review of process design drawings in accordance to customer specifications, applicable codes, standards and other generally accepted practices in the design of industrial plants such as petrochemical and oil refineries.

Duties & Responsibilities

• Lead a process team to carry out process design engineering work in feasibility studies, Front End Engineering Design (FEED) and detail engineering design.
• Act as Key Person to execute tender preparation, actual EPC/EPCm project execution.
• Generate project specifications, design philosophy, PFDs, P&IDs, calculations, operation manuals to comply with clients’ requirement.
• Carry out process simulations and develop heat and material balances.
• Carry out process design for reactors, columns, drums, heat exchangers, tanks and develop respective process datasheets.
• Carry out hydraulic design for pumps, compressors, blowers and develop respective process datasheets.
• Conduct and/or attend P&ID design reviews, HAZOP, IPF, SIL studies, 3D model reviews.
• Check design outputs, datasheets and drawings prepared by Process Engineers to ensure accuracy and completeness to design requirements and concepts.
• Support construction and commissioning activities at site.
• Coordinate with client, Project Team and other engineering departments and vendors.
• Monitor manhours and schedule for Process work and deliverables.
• Perform other functions that may be assigned by Department Manager.

Requirements

• Bachelor’s degree in Chemical Engineering.
• Minimum 10 years’ of experience.

Skill Requirements

• Ability to use computer equipment and peripherals to carry out routine computing tasks.
• Good knowledge in PRO/II, HYSYS, HTRI, AUTOCAD and Microsoft Office.
• Possess good communication and technical skills.
• Strong leadership qualities and analytical and reasoning abilities.
• Ability to read, analyze, and interpret common technical information, contracts reports, international codes and standards.

Interested parties, please send in your detailed resume.

Meet the Team

As part of our team, you’ll work on groundbreaking technologies that impact the world, from products that simplify home automation and address medical issues to solutions that reduce energy waste and enable sustainable infrastructure.  You will also be supported by a team that values learning from each other and helping one another succeed.

This role will develop test strategies for ICs, including improvement of existing production test solutions. Role will also be involved in yield improvement and costs reduction while maintaining excellent product quality.

Responsibilities

• Support Test Solution Improvement for Cost Reduction, and Yield Improvement
• Support Tester or Handler platforms migration to attain low test cost and address test setup capacity constraints.
• Responsible for “Technical Product and Test Knowledge” required to guide internal team
• Provide best-in-class test program and product quality.
• Provide remote debug and technical support to offshore factory sites to resolve any Test Solution Related Issue
• Integrate test instruments or test screen from bench setup into test program.

Skills You Will Need
Minimum Qualifications:

• EE / Computer Engineering Bachelor with minimum 10 years of relevant working experience or Master Degree with reduced experience required.
• Work experience in a semiconductor preferably as a Test Engineer or Test Development
• Manufacturing/Sustaining PTE Qualification
• Strong understanding of ATE Test Programming principles, with experience in RF, Mixed-Signal or MCU testing
• Must have experience with industry standard Automated Test Equipment – Teradyne (Flex, J750) preferably, and other Mixed Signal or RF testers
• Test Program development experience & skills, including knowledge of C/C++, VB, MCU Assembly Language, PERL, Python, Scripting
• Advanced Bench Equipment Skills/ IC Application knowledge.
• PCB Hardware design knowledge & RF signal process trouble shooting skills.
• Good PCB Assembly and soldering skills
• Excellent team working ability as self-motivation, innovation, and individual contribution
• Able to mentor and provide training for internal team
• Demonstrable good project management and communication skills

Benefits & Perks:
You can look forward to the following benefits:

• Employee Stock Purchase Program (ESPP)
• Medical and dental insurance coverage including spouse and child(ren)
• Bi yearly health screening and flu vaccination
• Office location is above Tai Seng MRT station

Job Description

• ICA (Instrumentation, Control and Automation) related design for process plant (water/wastewater plant, incineration plant, etc.), from concept to implementation, ensuring project is delivered on time, within specifications and meeting industrial standards. ICA designs adhere to relevant safety standards (such as SIL, IEC 61511) and cybersecurity protocols to mitigate operational risks. Collaborate with process team to optimize the processes through intelligent control strategies, adaptive algorithms, and data-driven insights.
• Review project specifications, technical proposal/design documentations from the ICA subcontractor/supplier and liaise with project consultant / client for the approval of technical documentations/drawings.
• Support ICA related procurement work, develop cost estimates for ICA products and ICA works, and prepare the schedule for ICA works.
• Project coordination, ensure project is on schedule and is running smoothly, including handling technical matters at site, managing ICA subcontractor/supplier and working on site with clients and other stakeholders.
• Supervise installation and testing and commissioning of ICA works.
• Other duties as assigned by the management.

Requirements

• Minimum 5 years of experience in process plant electrical EPC work with Degree in Electrical , Electronic or Instrumentation Engineering or related Engineering Discipline. For Diploma holder, minimum 6 years of experience is required. For senior position, candidate must have at least 8 years of experience.
• Familiar with relevant code of practice and standards in Singapore
• Experience with Revit/AutoCAD Plant 3D/Bentley is preferred.
• Familiar with Microsoft Office Suite.
• Excellent communication skills in English, both verbal and written.
• Willingness to take on responsibility and make effort to meet deadlines.
• Extensive hands-on experience in designing and implementing complex ICA systems in industrial environments.
• In-depth knowledge of control system architectures, such as PLC-based systems.
• Familiar with industry standards and protocols (e.g., OPC-UA, Modbus, HART, Profibus, Ethernet/IP).
• Strong understanding of process control theory, PID tuning, and adaptive control strategies.
• Excellent problem-solving and troubleshooting skills for resolving complex technical issues.
• Strong communication skills to guide technical discussions and collaborate with diverse teams.
• Good technical understanding of water, wastewater or incineration related control system.
• Relevant experience in ICA design and site work for water, wastewater treatment and incineration works.
• Highly motivated and ability to work independently with minimal supervision.
• Willing to work 5.5days per week.
• Able to work in Tuas / Changi area.

Shangri-La Rasa Sentosa, Singapore

We are looking for a Shift Duty Engineer to join our team!

As a Shift Duty Engineer, we rely on you to:

• Manage, coach and supervise the engineering technicians
• Ensure all equipment runs smoothly at all times
• Carry out and prioritise emergency work requests
• Support engineering projects through planning, supervision and execution
• Support the audit and training programmes
• Running shift to ensure smooth operations
• Be part of the Emergency Response Team

We are looking for someone who:

• Has a passion for Engineering
• Preferably has experience in electrical engineering, building maintenance and repair
• Willing to work shifts
• Has experience as a Duty Engineer or equivalent in a hotel
• Has relevant experience with Building Maintenance
• A motivator and a self-starter

We Offer

• 5-day work week
• Learning and Development opportunities for career development
• Medical and insurance coverage
• Special employee discount within Shangri-La Group
• Duty Meals and shuttle bus provided

If you are the right person, what are you waiting for? Click the apply button now!

• Proactively manages every lead opportunity to guarantee prompt fulfilment and business unit profitability
• Carries out and gives management precise forecasts and sales pipeline plans for planning
• Actively solicits distributors for service sales (aftermarket items) in addition to spare parts sales.
• Develops sales strategy in conjunction with the sales team to focus on identifying new prospects inside current accounts.
• Develops sales strategy in conjunction with the sales team to focus on identifying new prospects inside current accounts.
• Possess extensive understanding of a broad variety of diesel industrial engines, ranging in capacity from small to large, in order to support distributors by offering technical advise on spare parts.
• Optimises the amount of inventory (own stock and consignment stock) at the customer's location in order to minimise stock-up costs and provide customers with sufficient parts availability.
• Retains precise documentation of all projects, costs, sales, and activity reports
• Makes and delivers proposal presentations to prospects, clients, and sales people.
• Oversees and takes part in cross-functional programs for continual development.
• Carries out further aftermarket and parts sales tasks as assigned.

Requirements:

• A mechanical or electrical engineering diploma or degree with at least three years of relevant experience, ideally in the automotive or spare parts industries
• A reasonable amount of travel (10 - 15%) in the Asia Pacific and South East Asia region is required for this role.
• Possess great presenting skills, strong verbal and written communication skills
• Have a strong focus on providing excellent customer service and a strong passion for spare parts and power generation goods.
• Strong interpersonal and communication abilities
• Self-reliant, goal-oriented, and possessing excellent business and commercial acumen
• It will be helpful to have prior knowledge with engine manufacturers' spare parts.

Job Description :

• Ensure production machines run a optimal state and to meet the machine related KPIs while ensuring compliance with saferty work procedures
• Solving technical issues on various production and facility equipment
• Ensure timely execution of maintenance and achieving minimal machine downtimes
• Carry out works in accordance with the proper safety work procedures
• Proficient in electrical technical knowledge and hands on skills for works in industrial plant environment
• Responsible for reviewing the work processes to determine if any problem exist and seek improvmement wherever possible
• Review and recommend process improvement, standardisation and optimization
• Any ohter dutues/ projects as assigned by the Manufacturing Operation Manager

Job Requirements :

• Diploma in Electrical / Electronic Engineering or higher
• 2 to 5 years' experience in process engineering in manufacturing plant or industrial environment
• Effective oral and writeen communication skills in English and Mandarin
• Team player and commitment to work during non-office hours shall at any time
• Able to perform shift work whenever neceaasry

Job Description

• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines.
• Supervise and coordinate site installation works by contractors.
• Attend site coordinate meetings with main-con, consultants and contractor.
• Lead daily briefing and execute the project activities and oversee implementation of the quality plan.
• Coordinate installation activities, site safety, order, arrange and receive M&E major equipment delivery for contractors’ installation.
• Arrange and attend material, equipment, installation, and testing inspection.
• Carry out testing and commissioning, combined services testing for TOP/CSC,
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards and safety aspects.

Requirements

• Min Diploma in Building M&E Service (ACMV, FP, P&S, BMS, Ele and ELV) , Mechanical and Eletrical Engineering
• Min 5 years of experience
• Familiar to Building services (ACMV, FP, P&S, BMS, Ele and ELV) code requirement and basic design and necessary submission for tender bidding and construction, TOP and CSC
• Experiences for coordination with architecture, C&S and process team for M&E Space, maintenance and fire exit routing
• Skilled in design, coordination, and project management
• Experience in tender bidding, with strong analytical and critical thinking abilities
• Interpersonal, communication skills & leadership
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification are highly desirable

Job Description

• Prepare and submit MSRA prior to the commencement of work
• Liaise with SO team to clear off inspection
• Lead the site supervisor in clearing off site inspection, and to check and ensure that the work is carried out safely as per drawing, and is of good quality
• Coordinate with subcontractor to resolve the issues and to ensure that the work is carried out as per approved MSRA & design, and to meet the schedules
• Check and ensure all the temporary work is carried out as per PE design

Requirements

• Degree in Civil Engineering or equivalent
• Min 2 to 3 Years Relevant Work Experience (C&S RC / building work)
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

OPERATIONAL

To design and perform detailed designing for machine electrical control systems.

To write Programmable Logic Control (PLC) program for automatic machine control & processes. Preferably, with Industrial PC (IPC) programming experiences too.

To collaborate and work together with the Design Team (comprising of both mechanical & electrical members) for the design concept arising from new projects proposal and confirmed projects.

To lead the in-house electrical staff and/or the company’s appointed electrical vendors on the respective machine control and electrical systems and operations of the projects.

To lead the assembly members & technicians during Machine set-up, Machine Assembly Process, Alignment, Testing & commissioning in the Company and/or customer site.

To spearhead meetings and review with the design team and the customers on control system requirements and specification.

SMART FACTORY TECHNOLOGIES & AI PLATFORM

To undertake robotics programming or programming as well as commissioning on the Industrial Robots, MIR and other collaborative robotics systems.

To Conduct 2D and 3D camera application evaluations.

To team up with cross-disciplinary teams of engineers & specialists focusing on smart factory technologies & projects.

To ideate and build robust data and digital technology driven solutions for advanced manufacturing / industrial processes.

To leverage AI and robotics-integration solutions to meet customers’ automation & real-time needs.

Department: R&D

Report to: R&D Director

We are looking for a senior Mechanical Engineer to join us in Singapore, with opportunities to travel overseas.

In this role, you will be responsible for the mechanical design, development and testing for Xnergy wireless power and power conversion products.

This includes various stages in a product’s life cycle such as concept/ architecture, prototyping, evaluation, production transfer, manufacturing, and maintenance.

You will work closely with the R&D team (hardware, firmware, and software engineers) to contribute to power converter design and shape the development of our future product strategies.

You are expected to provide theoretical knowledge and hands on skill in mechanical design, stress and strength, thermal, vibration, acoustic noise relevant to product.

Essential Functions/Responsibilities

1. Drive all design aspects of mechanical systems in product, i.e., structures, assembly, reliability, PCB, electro-mechanics parts, thermal management, vibration/shock/drop, acoustic noise, etc.
2. Contribute to mechanical aspect of product in all phases of the development life cycle including requirements analysis, architecture, design, manufacturability, testing, and release to ensure high quality product.
3. Work closely with R&D team, field applications, production teams, vendors, and suppliers for specifications, design, prototyping, and fabrication locally and remotely.
4. Perform mechanical design and design optimization involving 3D modelling/2D drawing, tolerance stack-up analysis, material selection, structure analysis, process and tooling (stamping, die casting, moulding).
5. Develop test jigs, tools, testing methods, and verification process.
6. Produce documentation for mechanical design (3D 2D parts, assemblies, drawings) and test results.
7. Finding root-cause and solve technical issues during new product development and product improvement as well as in field escalations.
8. Contribute to related technology roadmaps, features development, next generation product.
9. Plan and schedule to meet goals, deliverables, and deadlines.

Requirements

1. Bachelor’s/Master’s degree in Mechanical Engineering or other related field.
2. Possess minimum 3 years of relevant work experience in products (power related products will be an advantage).
3. Good understanding and experience in product design cycle and documentation process.
4. Solid experience with CAD software, such as Solidworks is a must.
5. Knowledge and experience in product chassis design, assembly, thermal management, airflow, ingress protection, vibration, acoustic noise, testing, and design of experiment.
6. Familiar with fabrication methods (sheet metal fabrication, CNC, 3D printer, injection moulding, die casting) and materials (metal, plastic, thermal related materials).
7. Experience in DFMEA (Design Failure Mode and Effect Analysis), DFM (Design for Manufacturability), DFA (Design For Assembly), tolerance analysis, cost analysis.
8. Familiar with good design and engineering practices in industry.
9. Experience working with supply chains and manufacturers.
10. Strong practical knowledge on engineering drawing, testing, troubleshooting, including familiarity with equipment.
11. Self-driven, proactive, assertive, organised, resourceful, disciplined, and able to work in a collaborative, fast-paced, team environment.
12. Good interpersonal skills, analytical skills, written and verbal communication skills in English and Chinese language.
13. Able to work in start-up environment with global, cross-cultural, and cross-functional engagements.

Description

Designs and drafts electrical/ construction drawings for modification works and provides technical leadership, technical advice on all plant online electrical and instrumentation systems such as motors, drives, instruments, PLC, DCS and SIS controller. Leads and supervises the E&I team to execute preventive and predictive program to achieve output KPIs.

Responsibilities

• To lead and supervise the E&I team to execute preventive and predictive program.
• To review and provide input on technical drawings, SLD and control circuits.
• To troubleshoot and determine necessary repairs and maintenance.
• To perform required maintenance duties as needed on an on-call basis as scheduled.
• To perform root cause analysis of failures and develop counter-measures to prevent future failing of Equipment.
• To understand the basic system design concept of different instrument measurements/ automation in the plant.
• To participate in shutdown work planning and execution.
• To perform spare parts planning and follow-up with vendors.
• To comply to and update plant documentation such as as-built, instrument electrical hook-up/ DCS and PLC cabinet drawings etc.
• To set-up and update the instrument/ electrical maintenance programmes and schedules.
• To initiate and prepare handover to subordinates/ contractors and ensure all maintenance checks are completed and documented, adhering to company standards for equipment installation.
• To repair and maintain plant instrumentation systems.
• To repair and calibrate instruments used for various process measurements and controls throughout the plant process areas.
• To measure and report the effectiveness of department activities.
• To develop and maintain departmental work instructions for all tasks.
• To perform weekly inspection and take an inventory of tools and equipment and submit requisition to replace broken or missing items.
• To monitor and update daily manpower reports and feedback on any shortages.
• To plan and enforce E&I works according to schedule and specified targets.
• To supervise and monitor every aspect of the status and progress of the works.
• To prepare and review method statement and risk assessment.
• To communicate and work closely with workers and contractors to plan for priority activities in line with sequence of works and maintain material and works quality/ standards according to project specifications.
• To attend weekly sub-contractor meeting and provide feedbacks on all site issues and assist in providing solutions to resolve the problems.
• To supervise and monitor every aspects the status and progress of the works.
• To prepare and update weekly progress report and submit to Planning Department.
• To prepare request for inspection according to approve Inspection Test Plan (ITP).
• To communicate engineering/ technical/ quality requirements to the team.
• To assist the Superintendent or Engineer to perform planning of labour, tools and materials.
• To supervise and inspect electrical and instrumentation construction on site buildings, common facilities and erection.
• To direct involvements and supports of safety controls to workers all the time and maintain safe work environment, ensuring that team members adhere to safe working practices.
• To actively participate in safety programs and implementation such as speaking at toolbox meetings.
• To complete Work Orders and document the time, tasks and parts/supplies needed to complete the Work Order in the software.
• To maintain updated documentation of all electrical and/or instrumentation changes implemented by said individual or contractors hired by the plant.
• To lead shift activities/ team building/ good communication skills.
• Any other tasks and responsibilities assigned from time to time.

Requirements

• Bachelor of Electrical and Electronic Engineering preferred
• Minimum 5 years’ experience in Oil/Gas/Petrol Chemical environment preferred
• Competent in E&I maintenance and project work.
• Good knowledge in Electrical / Instrument equipment and parts.
• Able to perform minor design work.
• Experience in preparing quotation/tender for E&I work is an added advantage