.Job Description

• To carry out maintenance and repair to ensure equipment are in good working conditions and quality
• Maintaining of records and repair activities
• Basic plumbing installation knowledge
• Perform other tasks as assigned by the Management

Job Requirement

• Candidates without experience but possess the right attitude will be considered
• Possess Class 3 licence
• Able to work independently
• Responsible and able to work in a team
• Good interpersonal
• Plumbing knowledge will be an advantage

Major Duties & Responsibilities
(A) Specific:

• Responsible for the Quantity Surveying and Contract Administration.
• Request / sources for quotations from sub-contractors / suppliers.
• Prepare tender and contract documentation including collection and checking for completeness of documents.
• Prepare and analyze costing for tenders.
• Prepare Bill of Quantities (BOQ).
• Handle and closing of tender for submission.
• Assist in preparing payment certificates.
• Prepare and submit progress claim and variation orders.
• Compile full set of measurement for Final Account Submission.
• Assist in monthly monitoring actual cost versus budget.
• Liaise with Clients, Consultants, Sub-contractors, Suppliers and relevant authorities etc.
• Review construction subcontracts between company and subcontractors including general and special terms and conditions, requisitions, specifications and drawing, procedures.
• Site visit and attend site meeting, if applicable.

(B) General:

• Maintain proper documents and filing of drawing for all tenders according to requirement as per ISO Standards, if applicable.
• Coordinate and work with other departments.
• Prepare the relevant reports.
• Other duties as assigned.

(C) Safety:

• To follow the safety procedures, rules and regulation and eliminate or reduce hazard at the workplace.

Job Requirements:

(A) Education, Qualifications & Special Training:

• Degree or Diploma in Quantity Surveying.
• Job holder without the above qualification but with relevant experience would be considered.

(B) Knowledge & Skills:

• Independent, proactive and self-motivated.
• Good teamwork.
• Good communication (verbal & written) skills.
• Good in negotiation and coordination skills.
• Effective time management.
• Proficient in Microsoft Office.

(C) Experience:

• Minimum 4 years of working experience in related fields or in construction industry.
• Job holder without relevant experience would be considered, training will be provided.

Wonder® Engineering Technologies is instrument company focusing on instrument solution for refinery and petrochemical process, with setup in Singapore, Malaysia, China, & Thailand.

We are an ISO 9001 certified engineering & technology-based Instrument supplier, Provider, equipped with ‘Best-in Class’ temperature monitoring instruments and experience, specializes in developing different measurement solutions for challenging processes. To find out more about our company, please visit our website www.wonder.com.sg.

Office Admin – 5 Days

Work Location: Bukit Batok (West)

Job Responsibilities:

• General administrative and sales support.

• Travel arrangement including air flights and hotel accommodations.

• Liaise with vendors, customers, transporters & forwarders on timely collections and delivery of orders.

• Related ad-hoc administrative duties as assigned.

Job Requirements:

• GCE’O’ level or ITE graduate.

• Proficient in English and Microsoft Office.

• Good interpersonal and communication skills.

• Only Singaporean or PR need to apply.

Interested applicants, please submit a copy of your updated resume to us.

Wonder® Engineering Technologies is instrument company focusing on instrument solution for refinery and petrochemical process, with setup in Singapore, Malaysia, China, & Thailand.

We are an ISO 9001 certified engineering & technology-based Instrument supplier, Provider, equipped with ‘Best-in Class’ temperature monitoring instruments and experience, specializes in developing different measurement solutions for challenging processes. To find out more about our company, please visit our website www.wonder.com.sg.

Purchasing Officer – 5 Days

Work Location: Bukit Batok (West)

Job Responsibilities:

· Source and assess potential suppliers for instrument components, materials, and procurement products locally and overseas.

· Identify and evaluate new suppliers while reviewing existing suppliers.

· Communicate with suppliers and place orders for high-quality products and materials.

· Maintain positive supplier relations, negotiate pricing, payment terms, and lead times, ensuring on-time delivery.

· Collaborate with suppliers on delivery scheduling, quality issues, component specifications, and certification requirements.

· Arrange training for engineers with suppliers as needed.

· Monitor & manage project costings closely to achieve cost savings.

· Monitor and manage inventory.

· Work with engineering, workshop, and assembly teams to achieve cost savings and on-time deliveries of orders.

· Enforce procurement policies and procedures.

· Perform ad-hoc administrative duties as required.

Job Requirements:

• GCE’O’ level or Diploma.

• Min 2 years’ working experience in procurement function.

• Self-driven, self-motivated and proactive.

• Good interpersonal and communication skills.

• Only Singaporean or PR need to apply.

Interested applicants, please submit a copy of your updated resume to us.

Objectives of this role

• Supervising and managing construction projects from start to finish, ensuring adherence to project plans and specifications.
• Reporting project updates, milestones and potential risks to the project manager and key stakeholders.
• Analysing and interpreting engineering drawings, survey reports and other technical documentation to guide the construction process.
• Planning and overseeing allocating resources, materials and equipment to optimise project efficiency.
• Monitoring project costs, identifying cost-saving opportunities and adhering to budget constraints.
• Providing technical guidance and expertise to resolve construction-related challenges.

* Reports to the Project Manager or Assistant Project Manager

* In-depth understanding of project specifications, technical details and construction drawings

* Carry out work scheduling, material requisition, planning, project supervision and documentation

* Supervise structural/architectural works, co-ordinate with client's representatives, consultants and sub-contractors on technical matters

* Ensure timely completion and good quality of works

* Ensure safety regulations are complied with

Requirements

* Degree in Civil/Structural Engineering or equivalent

* 5 to 10 years' of main con site management experience

Responsibilities:

HR

- Oversee and implement strategic manpower planning initiatives.

- Manage recruitment processes, onboarding, and resignation procedures.

- Maintain staff and leave records.

- Process staff claims and handle benefits administration.

- Implement performance appraisal processes twice a year.

- Manage union relations

Finance

- Review monthly journals, provisions, and financial statements.

- Handle internal and external audits

- Administer GST, corporate tax submission, and withholding tax calculation.

- Prepare and review quarterly/yearly/5 years forecast.

- Submit budget to Board of Directors for approval.

- Analyze budget vs. actual results regularly.

Engineering Management:

- Troubleshoot basic mechanical/structural/payloads/systems problems.

- Support Engineering department and project team goals.

- Coordinate with other departments as necessary.

- Utilize internal drawing/document standards and interpret OEM airplane installation drawings.

Requirements:

- Qualified degree in Engineering/Finance, or related field.

- Fluent in Japanese for effective communication with offices in Japan.

- Knowledge of engineering principles, design, and practical application.

- Proficient in reading and understanding Computer Aided Design (CAD) designs.

- Finance and human resources skills are essential.

Job Description

• Partner with stakeholders to manage the end-to-end Talent Acquisition process, sourcing and interview of candidates; prepare salary proposal; on-boarding and off-boarding process
• Provide sound HR advice on all strategic people matters, working with the broader HR Team on continuous improvement of HR policies, benefits, programs and processes, ensuring compliance to regulations and best practices
• Collaborating with HR COE teams to support Talent Management, Learning & Development, Employee Engagement initiatives
• Provide advice and guidance to managers in developing, documenting, and communicating solutions (including disciplinary action) for employee relations issues
• Provide guidance to stakeholders in global HRMS queries and issues
• Monitoring of workforce movement, administering of contracts

In view of ISMS requirements:

• Maintain confidentiality of information received, either in writing or verbally, whether technical, business, legal, organizational, personal or any other information that could result in damage to Yokogawa in case of disclosure to unauthorized persons, regardless of whether the information is classified as confidential or not
• Take all reasonable, necessary, and appropriate steps to safeguard confidentiality, integrity, and availability of the Yokogawa’s assets and information

Requirements

• Degree in Human Resources or Business Administration
• Excellent people management skills, and effective communicator
• Resourceful with forward planning skills and ability to multitask
• Highly driven, strong sense of initiative and urgency
• Proficient in MS Office Applications
• Proficiency in Workday software is a plus

By responding to Yokogawa’s advertisement, consent is considered given to Yokogawa to collect the required personal data for the purpose of recruitment with expectation that Yokogawa will protect personal data with security safeguards that are reasonable and appropriate to the sensitivity of the personal data, to protect it from unauthorized access, use or disclosure and complies with applicable regulatory requirements with respect to the retention of personal data.

At DB Schenker, you are part of a global logistics network that connects the world. A network that allows you to shape your career by encouraging you to contribute and truly make a difference. With more than 76,000 colleagues worldwide, we welcome diversity and thrive on individual backgrounds, perspectives and skills. Together as one team, we are Here to move.

About the Team

The Contract Logistics Engineering & Automation team is responsible for diagnosis and reengineering process to work out the improvements and with innovations/automations application as necessary on Contract Logistics operations for our customers in APAC and all over the world. One of major aspects is the application of updated process through engineering and innovative technologies including but not limited to automation and robotization in both new business opportunities and existing operations.

Responsibilities

Lead Engineering & Automation projects of assigned markets to support business improvements and renewals:

• Provide leadership to Qualify, Resource and Oversee the Engineering and Automation design process of all warehousing projects in assigned team within Asia Pacific Region which includes the planning, risk assessment, data analysis, material flow, determination of optimal solution concept, detailed solution design, manage automation vendor quotation and investment analysis.
• Ownership of the Standard Work Framework for Engineering & Automation APAC, to ensure efficient engineering & automation simulation processes and aligned to the key steps and milestones represented in CLDM. Guide the EA team resources to ensure awareness and compliance.
• Be the Engineering & Automation SME for matters in relation to any focused solutioning of product(s) or relevant EA tools. Constantly diagnose process and analyze engineered improvements for warehousing activities including but not limited to inbound, storage, outbound and VAS as an end-to-end process within 4 walls operations.
• Work collaboratively with the Engineering & Automation community to ensure the templates and offerings are correctly deployed to maximize the business success through these products and specific verticals
• Promote, leverage and facilitate the replications of best engineering & automation practices across EA Network

Engineering and Automation for Continuous Improvements of the assigned customer account:

• Collaborate with internal and external stakeholders to understand the requirements, communicate data requirements and methodology.
• Analyze detailed data to provide processes and workflows determination, position responsibilities and system flows in conjunction with physical material flows, identify tactical recommendations
• Analyze contractual commitments, specifications, performance and other data to plan and develop logistics activities by using knowledge of industrial and/or process engineering, automation, ergonomics, business practices & requirements
• Review the current layout and perform warehouse redesign as needed taking into consideration of net impact
• Conduct time studies and workflow movement measurement analysis to determine the current productivity and cycle times, and hence review the usage of appropriate MHE in relation to product specification, operations requirement and layout where necessary
• Validate and identify appropriate storage types and methodologies, both in manual and automated solutions, including applications of appropriate Automation and technologies for processes and/storage to increase productivity and/or capacity when applicable
• Diagnose and define potential improvement opportunities and setting the productivity standards for the operations for ramp-up/ramp down scenario.
• Clearly present and demonstrate the impact of designed processes to warehouse design, technologies required, service to customer and all stakeholders.
• Drive project deliverables, presentation of results and recommendations to stakeholders
• Produce cost efficient solution and supply pertinent information to support ROI/MIRR during Investment Application and approval facilitation.
• Provide support our sites and operations with automation experiences sharing/coaching during specification, implementation and testing phases
• Define specifications and act as a counterpart to our global and regional supplier partners for automation
• Engineering:Responsible for managing and developing solution reengineering for existing customers including nominated projects/tasks from operations and contract renewals via scheduling plan
• Renewals: Trigger and engage the review of existing operations proactively to lead process and/or storage reengineering/improvements of Contract Renewals. Deploy detailed Engineering project when necessary.
• Automation: Assess the feasibility of utilizing and expanding the use of Automation, Robotics, and Technologies on applicable process or setup to improve productivity on the operations activities, but not limited to Inbound, Putaway, Picking, Packing, Outbound and VAS. Work on the projects screening and apply strategic imperatives to drive innovation & automation in key operations. Assess the feasibility of applying automation / robotization in customer projects (new and existing businesses)
• New Business: Support in new business/growth opportunities requiring Automation via technology check

Coaching & Training:

• Support to develop and conduct training programs and provide coaching in areas of industrial engineering and automation to in-country junior resource as required based on participants’ training/coaching needs
• As a member of APAC Engineering & Automation Leadership, support on the development, deployment, and continuous improvement of standardized methodologies, tools and templates
• Act as Engineering & Automation focal point for the assigned customer account
• Ensure self and team members have an Individual Development Plan (IDP) identifying personal development and alignment to business need
• Conduct regular communication to ensure team members understand the company’s objectives and goals
• Periodical evaluation of team members’ performance based on their personal growth targets

Qualifications

Education

• Bachelors’ degree, in Industrial Engineering / Logistics Engineering / Automation & Mechatronics Engineering
• Postgraduate degree is an advantage

Related Experience

• Experience in modern warehouse and distribution, supply chain design (automation and other modern warehousing innovation (robotics, digitalisation) is preferred
• Minimum 8 years’ professional experience in Logistics, warehousing or 3PL industries, preferably in an international logistics service environment
• 8+ years of relevant working experience of solution design/automation/process engineering in the logistics and supply chain industry; knowledge in 3PL is a plus
• Experience in VSM and/or Six Sigma is a plus

Technical Skills

• Solid analytical skills with good commercial and technical understanding of Contract Logistics and Warehousing.
• Excellent knowledge and/or extensive experience of logistics automation methods and techniques
• Knowledge on operative IT systems/WMS and automation implementation or worked with automated logistics systems will be added advantage
• Excellent proficiency in Microsoft Office (Excel functions – VBA/VLOOKUP/PivotTable, and PowerPoint, etc), and knowledge about other Microsoft 365 Apps including but not limited VISIO/Stream/Power BI is a plus
• Practical working experience with AutoCAD. Experience in CLASS, Sketchup and/or other supply chain design software/tools is a plus
• Good knowledge in warehouse solution design; able to develop operationally feasible solution(s) to meet customer requirements

Soft Skills

• Pragmatic financial acumen to optimize both investment level and ROI
• Structured project approach and ability to deliver results on time, on budget, and to the excellent standards
• Good command in spoken and written English; other Asian language(s) is beneficial
• Good organization skills with experience of leading, growing and nurturing a team is preferred
• Self-starter with positive attitude to overcome problems effectively and able to work under own initiative with minimal supervision
• Highly responsible, initiative, proactive, and able to coordinate and motivate people and to work as a team under time pressure
• Intercultural skills and working experience abroad are preferred

Travel Requirements

• Able to travel nationwide and regionally/internationally on project basis as necessary (<20%)

Why DB Schenker?
Competitive salary package
Opportunities for career growth and development, both locally & internationally
Supportive and collaborative team environment
Access to company-wide training programs and initiatives

Salary: $2400-$2800+OT

Industry: Engineering

Located at Chai Chee

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

The project site engineer's role is to ensure implementation of projects according to plan. This includes the following tasks:

1. Co-ordinating with main-contractor & sub-contractor on shop drawings, catalogue and technical submission

2. Attending main-contractor coordination and technical meeting

3. Monitoring of site installation progress and arrange inspection of works with main contractor

4. Reporting on site progress daily

5. Executing company safety policy and measures on site

6. Ensuring site team carry out the work professionally

7. Checking on site team quality, safety, and adherence to site rules

Responsibilities

• Manage and develop a team of world-class engineers to keep them motivated, grow their technical expertise and meet their career aspirations.
• Spend about half your time on hands-on technical work, including coding.
• Manage projects end to end in a fast-paced Agile environment to deliver quality software on time, and follow through post release to ensure effective usage.
• Partner with business owners and product managers to help shape product strategy, sharpen product specs and come up with innovative solutions.
• Drive continual process improvements in areas like unit test, code review, static analysis, CI, CD.

Requirements

• At least 5 years of software development experience, preferably in horizontally scalable services in a cloud environment.
• At least 2 years of managing an elite engineering team with multiple release cycles under your belt.
• Proven ability to recruit, develop and retain talent.
• Steeped in Agile ways. Deep knowledge of software engineering best practices; burning desire to drive the team to adopt them.
• Highly adept at project management in a demanding fast-changing environment with tight deadlines and scarce resources. Ability to multi-task is key.
• Bachelor’s or Master’s degree in Computer Science or related field from a top university.

Job Description:

• Prepare and Monitor project cost budget, cash-flow for project, track changes in design/construction work, check variations and adjust budget projections accordingly.
• Source and Liaise with Site Personnel, Suppliers, Sub-contractors, Consultants and/or Architects for all project-related matters.
• Responsible for Progress Claims, Variation Orders, Final Accounts and Sub-contractor Progress Claims.
• Work closely with the project team in the Analysis, Evaluation and Negotiation of quotations, so as to ensure timely award of sub-contractors and suppliers.
• Ensure timely finalization of main contracts and sub-contracts.
• Provide Support in any other ad-hoc duties that may be assigned time to time.

Job Requirements:

• Candidate must possess at least a Bachelor’s Degree/ Post-Graduate Diploma/ Professional Degree in Engineering (Civil), Quantity Surveying or Facilities/ Building-related with a minimum of 3 years of relevant work experience.
• Have a positive working attitude, pro-active and meticulous in his/her work.
• Posses strong inter-personal communication & negotiation skills; able to work as a team.
• Able to work under pressure and meet tight deadlines, either independently or in a team environment.

Join Our Growing Team!

As Skylink Group Holdings continues to expand, we're looking for passionate and talented individuals to join our journey. Our success has opened up exciting new roles across various departments, offering a wealth of opportunities for professional growth. At Skylink Group Holdings, you'll not only be a part of our success story but also a culture that values innovation, teamwork, and work-life balance. We offer a dynamic working environment, competitive benefits, and a chance to work with some of the brightest minds in the industry. Be a part of Skylink Group Holdings where your journey to excellence begins.

The Job

• Handle loan documentations related to Hire Purchase, Credit Loans and other loan products
• Regulate the form and contents of hire‑purchase agreements and the rights in accordance to Hire Purchase Act
• Process loan applications and verify data entry to ensure proper documents submission are correct and in place
• In charge of data entry and document filing
• Responsible for all the data record accuracy in the Enterprise Resources Planner (ERP) and Customer Relationship Management (CRM) systems
• Liaising with vendors, suppliers & partners for issues pertaining to discrepancies, short payment or collection arrangements
• Assist with sales admin processes
• Engage close interactions, coordinating with inter-department and external customers to ensure smooth day to day operations

Job Requirements

• Minimum qualification Diploma with 2 years experience in Hire Purchase in vehicle, Credit Loan or other loan products
• Strong in English, able to write, type and speak fluently
• Similar experience in the automotive industry and credit/loan experience is an advantage
• Fast in response and able to work in a fast-paced environment
• A flexible, resilient mindset and can do attitude
• Good interpersonal and communication skills

We are seeking a dedicated and detail-oriented Sales Support professional to join our Company. The ideal candidate will possess excellent organizational and communication skills, be proactive, and thrive in a fast-paced environment.

Respond promptly to customer inquiries via phone, email, or chat.

Assist in the preparation and submission of sales proposals and contracts.

Efficiently process sales orders, ensuring accuracy and timely billing.

Coordinate with internal departments to fulfill customer orders.

Education and Experience

High school diploma; Bachelor’s degree in Business Administration or related field is a plus.

Previous experience in sales support or customer service roles.

Summary:

Successful candidate will carry out service, maintenance works & projects for security systems at clients’ premises, including but not limited to Integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems

and CCTV systems.

Key Roles and Responsibilities:

• To troubleshoot and maintain/service security systems at clients’ premises
• Attend to fault calls during office hours and standby duties after office hours in rotating duty roster
• Liaise closely with client representatives on all service/maintenance related issues.
• Manage day-to-day client interactions and expectations for optimal results..
• Familiarize yourself and deliver customer satisfaction base on each client’s business, organization and objectives.
• Ensure that works carried out are in compliance with the Workplace Safety and Health Act.
• Perform any other technical tasks as and when required

Requirements:

• Min Higher Nitec & Nitec in Mechatronics/Electrical/Electronic Engineering or relevant with at least 2 years working experience.
• Knowledge and hands-on experience in security systems such as Integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems and CCTV systems is a must.
• Knowledge in IT/Network/Server is an added advantage.
• Good interpersonal and problem solving skills.
• Independent, self-motivated individual whom is able to work under minimum supervision.
• Required to perform standby duties
• Driving License – Preferably if candidate possessesits own vehicle

Responsibilities:

Source for projects on relevant tender platforms including sesami and gebiz
Develop proposal documents in response to RFP, RFQ and tenders
Produce quantity measurement within targeted timeline
Prepare and call quotations, including analyzing and evaluating for costing of tender
Support to ensure completeness and timely submission of tender bid

Construction

Assist in preparing cost budget, track changes in design/construction work and adjust budget projections accordingly
Review and prepare agreements for award to subcontractors and suppliers
Certify and evaluate progress work done, includes contract administration for variations for both subcontract and main contract works.
Assess and submit monthly progress claim, and recommend subcontractor’s monthly progress payment

Job Description

• Technical Support to regional Service Team for escalated service cases of Yokogawa products and Analyzer systems.
• Communicate with Global Response Center and other stakeholders for escalated cases and solutions.
• Online technical support and customer visits across YEA Region for unresolved cases
• Develop technical documents for Service Team’s competency development
• Support Service business development activities

Below duties in view of ISMS requirements:

• Maintain confidentiality of the Information received, either in writing or verbally, whether technical, business, legal, organizational, personal or any other information that could result in damage to Yokogawa in case of disclosure to unauthorized persons, regardless of whether the information is classified as confidential or not.
• Take all reasonable, necessary, and appropriate steps to safeguard confidentiality, integrity, and availability of the Yokogawa’s assets and information.

Job Requirements

• Degree/Diploma in Instrumentation/Electrical/Electronic Engineering
• 5 yrs experience in Service Portfolio – Commissioning, Troubleshooting, Root Cause Analysis, Repair of Process Instrumentation (Engineer with less experience can be considered if ready to accept challenges, learn and deliver)
• Experience in Petro Chemical, Oil & Gas, Power, Paper & Pulp, Water, Food, Pharma Industries etc.
• Fundamental knowledge in Field Instrumentation, Liquid and Gas Analyzer
• Good written and verbal communication skills and analytical thinking
• Proactive, self learner

By responding to Yokogawa’s advertisement, consent is considered given to Yokogawa to collect the required personal data for the purpose of recruitment with expectation that Yokogawa will protect personal data with security safeguards that are reasonable and appropriate to the sensitivity of the personal data, to protect it from unauthorized access, use or disclosure and complies with applicable regulatory requirements with respect to the retention of personal data.

The Qualifications:

• A diploma in Mechanical & Electrical or equivalent qualification.
• Mechanical & Electrical Coordination certificate from BCA
• A relevant Advanced Certificate / Higher NITEC / Advanced NBQ with 2 to 3 years of relevant work experience.
• A relevant certificate with 4 to 5 years of relevant work experience.
• NITEC / Higher NBQ with at least 5 years of relevant work experience12.

Duties and Responsibilities:

1. Assist the Project Manager to plan, monitor and control daily works at the project sites, able to read and drawing M&E drawing by using AutoCAD.

2. Implement all policies, activities, procedures, instructions as relevant and required by the QESH management system.

3. Comply with client and applicable legal and other requirements.

4. Implement plan actions from risks and opportunities assessment.

5. Take responsibility for prevention of work-related injury and ill health.

6. Ensure that project operations and document control procedures are adhered to.

7. Plan, coordinate and monitor M&E subcontractor’s activities at project sites.

8. Maintain good house-keeping and implement safety practices.

9. Ensure that all M&E works carried out are in accordance to the drawings, specifications, construction plan, procedures, work instructions, etc.

10. Ensure that inspection and tests are carried out as per Inspection and Test Plans, quality control mechanisms are being used and results are conformed to specifications.

11. Submit sample materials and calibration certificates to consultants for approval.

12. Undertake any and all other duties and responsibilities as so instructed by the superior.

13. Accountable for the quality, safety, health and environmental management and performance at the project site.

The skills required for an M&E Coordinator position:

• Analytical skills: The ability to analyze data and information to identify patterns, trends, and insights.
• Communication skills: The ability to communicate effectively with stakeholders, including project staff, partners, and donors.
• Project management skills: The ability to manage projects, including planning, implementation, monitoring, and evaluation.
• Research skills: The ability to conduct research, including designing research studies, collecting and analyzing data, and presenting findings.
• Technical skills: The ability to use software and tools for data collection, analysis, and reporting.

Join Our Growing Team!

As Skylink Group Holdings continues to expand, we're looking for passionate and talented individuals to join our journey. Our success has opened up exciting new roles across various departments, offering a wealth of opportunities for professional growth. At Skylink Group Holdings, you'll not only be a part of our success story but also a culture that values innovation, teamwork, and work-life balance. We offer a dynamic working environment, competitive benefits, and a chance to work with some of the brightest minds in the industry. Be a part of Skylink Group Holdings where your journey to excellence begins.

Job Description

• Dealing with all range and multi brand of vehicles with regards to sales activities
• Acquire sales with new and existing clients to meet targeted sales objectives
• Identify/Build/Expand new client base to achieve sales opportunities
• Purchase all types of pre-owned vehicles for inventory replenishment
• Follow-up/Develop sales lead to achieve monthly sales target
• Attend to sales inquiries
• Resolve customer’s complaint/issue when arises
• Follow-up on prompt payment
• Maintain a proactive relationship with existing/new customers
• Arrange for regular meetings with Clients
• Develop relationships for both new and existing customers
• Submit report on weekly and monthly sales activities

Requirements:

• Minimum 1-2 years of experience in sales
• Bilingual in English and Mandarin as need to communicate and liaise with Chinese speaking customers on contracts
• Good interpersonal and communication skills (both in spoken and written)
• Resilience, resourceful and goal oriented
• Possess driving license Class 3 and above
• Positive mindset and willing to learn attitude
• Good team player, KPI driven and self motivated
• Experience in automotive industry would be an added advantage

Benefits:

- Basic + Well structured commission scheme

- Medical, dental & Insurance coverage

- Work Life Balance

Job descriptions:

· Propose formwork system solutions and make design drawings for clients.

· Design calculations and structural analysis.

· Coordinate with different stakeholders to meet their demands.

· Ensure work is designed with available inventory and in conformance with contractual obligations.

· Establish comprehensive material list.

Requirements:

· Minimum Diploma in Civil engineer or related major.

· Minimum 1 year relevant working experience in the construction or related sector.

· Our company is engaged in formwork systems designing, experience in designing formwork systems will be an advantage.

· The position needs to communicate with the director who is Mandarin Speaker, proficiency in Mandarin is required.

· Good at Microsoft Office, AutoCAD and Tekla Tedds.

· Team player and positive attitude to learning.

· Able to work well under pressure and tight deadlines.

Join Our Growing Team!

As Skylink Group Holdings continues to expand, we're looking for passionate and talented individuals to join our journey. Our success has opened exciting new roles across various departments, offering a wealth of opportunities for professional growth. At Skylink Group Holdings, you'll not only be a part of our success story but also a culture that values innovation, teamwork, and work-life balance. We offer a dynamic working environment, competitive benefits, and a chance to work with some of the brightest minds in the industry. Be a part of Skylink Group Holdings where your journey to excellence begins.

The Job

• Greeting customers at the front desk and providing exceptional service, including offering general information, redirecting customers, addressing compliments and complaints, and ensuring a positive customer experience.
• Serving as the point of contact for sales hotlines and inquiries, efficiently addressing customer queries and providing information.
• Demonstrating meticulous attention to detail when handling customer data.
• Managing and distributing sales leads in accordance with company standards.
• Proficiency in using Customer Relationship Management (CRM) systems to maintain customer records and interactions.
• Developing a comprehensive understanding of the automotive market and products to effectively assist customers.
• Generating monthly sales lead reports by collecting and analyzing customer information to identify trends and opportunities.
• Reporting to the Marketing Manager and providing support to the marketing team when needed.
• Handling adhoc administrative duties as required to ensure smooth operations.

Requirements

• Minimum of a Diploma or equivalent qualification.
• Bilingual proficiency in English and Mandarin to effectively communicate with a diverse customer base.
• Strong customer service skills, both verbal and listening, to address customer needs and concerns effectively.
• Ability to adapt and respond effectively to various situations and customer demands.
• Excellent communication and presentation skills to convey information clearly and persuasively.
• Strong multitasking abilities, prioritization skills, and effective time management to handle multiple tasks efficiently.
• Candidates with prior experience in customer service and/or call center roles will be advantageous.
• 6-days workweek (Mon-Sat: 8.30am to 6.00pm)

Responsibilities

• Responsible for attending the customer complaints and develop resolution
• Responsible in planning and coordinating with the Production on non-conformance product screening as well as conducting containment measures and minimizes DMR issued by customers
• Responsible for providing engineering support to Internal Departments related to quality and technical issues

Requirements

• Min Degree in Mechanical Engineering or its equivalent
• Min 1 years of working experience in process or fixture designs

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

The Qualifications:

• A diploma in Mechanical & Electrical or equivalent qualification.
• Mechanical & Electrical Coordination certificate from BCA
• A relevant Advanced Certificate / Higher NITEC / Advanced NBQ with 2 to 3 years of relevant work experience.
• A relevant certificate with 4 to 5 years of relevant work experience.
• NITEC / Higher NBQ with at least 5 years of relevant work experience12.

Duties and Responsibilities:

1. Assist the Project Manager to plan, monitor and control daily works at the project sites, able to read and drawing M&E drawing by using AutoCAD.

2. Implement all policies, activities, procedures, instructions as relevant and required by the QESH management system.

3. Comply with client and applicable legal and other requirements.

4. Implement plan actions from risks and opportunities assessment.

5. Take responsibility for prevention of work-related injury and ill health.

6. Ensure that project operations and document control procedures are adhered to.

7. Plan, coordinate and monitor M&E subcontractor’s activities at project sites.

8. Maintain good house-keeping and implement safety practices.

9. Ensure that all M&E works carried out are in accordance to the drawings, specifications, construction plan, procedures, work instructions, etc.

10. Ensure that inspection and tests are carried out as per Inspection and Test Plans, quality control mechanisms are being used and results are conformed to specifications.

11. Submit sample materials and calibration certificates to consultants for approval.

12. Undertake any and all other duties and responsibilities as so instructed by the superior.

13. Accountable for the quality, safety, health and environmental management and performance at the project site.

The skills required for an M&E Coordinator position:

• Analytical skills: The ability to analyze data and information to identify patterns, trends, and insights.
• Communication skills: The ability to communicate effectively with stakeholders, including project staff, partners, and donors.
• Project management skills: The ability to manage projects, including planning, implementation, monitoring, and evaluation.
• Research skills: The ability to conduct research, including designing research studies, collecting and analyzing data, and presenting findings.
• Technical skills: The ability to use software and tools for data collection, analysis, and reporting.

Rapsodo is a Sports Technology company with offices in the USA, Singapore, Turkey & Japan. We develop sports analytics products that are data-driven, portable and easy-to-use to empower athletes at all skill levels to analyse and improve their performance. From Major League Baseball star pitchers to Golf tour players, athletes use Rapsodo technology to up their game across the world. Trusted by coaches and players from youths to professionals, Rapsodo provides real-time insights for all-time performance.

Our R&D team designs, develops and implements software solutions to address complex Rapsodo products. As a Mechanical Engineering Intern, you will be part of a world-class, skilled engineering team developing state of the art measurement solutions which help athletes reach their full potential.

As a Mechanical Engineering Intern, you will:

• Work in a small design/engineering team on a range of sports products

• Assisting in all stages of product research, design and development

• Witnessing products evolve from sketch to mass production

• Getting hands on with iterative prototyping and testing

• Developing technical and software skills

• Demonstrate strong technical skills: CAD - Solidworks preferred, Autodesk/ Rhino is also acceptable

• Fearless, inquisitive nature and the ability to discuss and develop ideas and concepts

• Unafraid to ask questions, raise concerns, disagree with the majority, and offer an opinion

• A desire to be challenged and to learn new skills

• A hands on and immersive approach to product development

• A stickler for details

For interested candidates, kindly submit your resume and samples of any past work, if applicable.