Responsiblities:

• Responsible for ferrying of staff and dispatch works as assigned
• Ensure timely collections and deliveries of goods / items
• Ensure cleanliness and general upkeep of vehicles at all times
• Perform routine inspection of vehicle and notify of occurring deficiencies or needs for repairs
• To perform work according to health and safety regulations
• Ensure safety practices and housekeeping is to maintained to the highest standard
• To perform Ad-Hoc duties as per assigned

Requirements:

• Class 3 / 4 Driving License
• Familiar with Singapore route
• Min 2years of relevant experience

For Sewage and Drainage Pipe Jacking Project：

1. work in SG, Indonesia, HK;

2. 5years above site supervision and overall management experiences ;

3. Able to plan, design concept, organize resources for these projects.

4. Able to add value for the projects through design concept, machine selection, manpower allocation, good schedule and planning.

Mininium 3 years experience in maintenance, servicing and repairs of Domestic Transfer Pumps, Booster Pumps, Rainwater Sump Pumps, Overflow Sump Pumps and Ejector Pumps and the related Control Panels. Servicing and repairs of Domestic Water Tanks and Generator sets.

Possess Class 3 Driving Licence.

Speak and write Simple English

Able to work 6 days week.

Must be able to standby on 24 hours for activation of emergency by customers for No Water Supply, Low Water Pressure or dirty water.

Possess leadership skill.

Able to work with foreign migrants.

DUTIES & RESPONSIBILITIES

• Repair and maintain, equipment and machines of cold room and ice maker
• Installation of chiller room,freezer room and troubleshooting chiller unit,freezer unit and ice maker
• Troubleshoot systems to determine causes and rectify.
• Service and repair kitchen equipment at work shop such as chiller, freezer ,ice maker ,bracing pan, water boiler, combi oven, dough mixer, spiral mixer and etc
• Prepare quotation and evaluate costing and propose to client.
• Ability to run a team and be responsible for installing and maintaining Cold-room projects.
• Dismantle and replace worn or defective equipment.
• Perform mechanical overhauls and refrigerant reclaiming.
• Install expansion and control valves, compressor, condenser and other components
• Top up gas to the systems
• Keep record of repairs and job schedules.
• Maintain tools and spare parts in good order.
• Practise safe and healthy working behaviour and report hazards and unsafe act.

Candidate Requirements

• Bachelor’s degree in Mechanical Engineering, HVAC Engineering, or a related field.
• Proficiency in CAD and AUTOCAD software.
• Strong knowledge of refrigeration, insulation, and energy-efficient design principles.
• Class 3 driving license is an advantage, but not necessary.
• Able to speak and write English.
• Knowledge of electrical wiring and mechanical works.
• Job requires heavy lifting, climbing and handling of materials
• Able to perform overtime and stand by for emergency
• Manage a team with proper guidance and team framework

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability to [email protected]

Responsibility & Scope of works:

• Manage, supervise and co-ordinate small projects, electrical installation turn-on inspection & licensing inspection undertaken by the Company and works assigned to you by the Project Manager.
• Participate in company tender exercise and quotation.
• Assist in price negotiation, drawings preparation and related activities.
• Ensure timely requisition of resources such as labour, materials, equipment for the small project works - power upgrading, tenancy renovation works, A&A works, etc.
• To issue site purchase order - purchasing material for electrical installation works.
• Inspection & Testing of the electrical safety of electrical installation in commercial and retail, healthcare, industrial building in compliance with Code of Practices.

Requirements:

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree in Electrical/Power/Electronics Engineering
• Good communication skills, team player, independent, strong leadership and self-motivated
• Knowledge in Electrical Installation (EI)
• At least 2-3 years working experience in the related field.
• Full-time position

Organisation Context

The Airspace Mobility Solutions (AMS) business, part of the Global Business Unit Land and Air Systems, is providing leading edge Air Traffic Management (ATM), Unmanned Traffic Management (UTM), Security and Digital Aviation solutions for the Commercial and Defence sectors.

The AMS business manages 11% of the world’s airspace and with revenues of over 500 million Euros worldwide, is the global market leader in airspace management solutions. In Singapore, the business focus is the delivery and support of two key ATM solutions including TopSKY-ATC(HE) and LORADS-III.

This role will initially support the TopSKY-ATC(HE) product line.

Role Description

The Engineering Delivery Management (EDM) role is focused on technical management of all engineering activities. They provide direction, guidance, expert advice, mentoring, support, audit, and workflow management (tasking prioritisation and resource coordination) in support of achieving project objectives and milestones in accordance with the approved schedule. The EDM will manage a multi-skilled team of system, software, integration, V&V and infrastructure engineers to provide on time delivery of services and support for systems and/or sub-systems of products, or for projects, across multiple platforms.

Responsibilities

· Provide direction, expert advice, mentoring, and workflow management (including task prioritisation and resource coordination) in support of achieving project objectives and milestones

· Lead a multi-skilled team of engineers to deliver software engineering solutions, aligning team capability to meet customer expectations

· Lead technical reviews, workshops, peer reviews and project reviews as appropriate for the program

· Prepare and lead the monthly TFR and support the WPPR

• Communicate, analyse, plan and report as necessary to align team capability and customer expectations

· Identify / Review risks, and proposing effective solutions; executing mitigation actions and reporting on outcomes / cost savings and residual risks

· Define and tailor the software engineering environment and the process, practices and tools applicable to the project

· Provide guidance to technical teams with regard to engineering matters aligned to the agreed architecture, to ensure effectiveness whilst meeting customer requirements

· Ensure the timely delivery of software releases in support of the integration and test program

· Promote knowledge sharing and ensuring that work is captured sufficiently for re-use across projects

• Provide support to bids, produce/review Engineering Cost estimates for any modification proposals to the functional baseline
• Provide support during the analysis of Customers requirements to propose and negotiate win–win solution responses with Customers based in Australia and worldwide
• Ensure clear communications (written and verbal) with external customers
• Manage customer scope iaw approved baseline/schedule
• Manage customer expectations

· Deliver iaw Thales processes and practises and contribute to their improvement

Knowledge, Skills & Experience

Qualifications

· Degree in Engineering, Computer Science, IT or other relevant qualification

Essential Experience

· Solid experience of managing the development of real time distributed complex software centric solutions in a safety critical environment

· Solid experience in total life cycle of complex software development, including processes and responsibilities at each stage in the cycle

· Solid knowledge and experience in Systems Engineering lifecycle (eg. EIA632, ISO/IEC15288)

· Advanced analytical and problem-solving skills, with the ability to engage a wide range of stakeholders across a complex environment

· Solid eperience of leading and mentoring team of multi-skilled engineering team, fostering a collaborative and productive work environment

· Solid experience in upskilling and training new engineers

· Experience in managing software development projects using Agile methodologies and the ability to drive iterative development processes

· Strong experience of using Earned Value Management, Work Package Control and reporting, with exposure to scheduling tools (MS Project, Primavera etc.)

· Financial / budgetary management of engineering work packages or tasks

· Strong ability to communicate effectively with various stakeholders, including Project, Engineering Delivery Managers, Product Owners, Technical Design Authorities, Speciality engineers and the engineering team under management.

· Collaboration tools including Jira, Confluence etc.

Desirable:

· Air Traffic Management domain expertise (inc. standards such as ICAO, Eurocontrol, AIDC)

· Experience in product delivery using agile methodologies like Lean methods (including PDCA, Kanban, Value-Stream Mapping); prior experience working Agile @ Scale framework is a bonus

· Programming/Scripting Languages; Java, C++, Ada, Python, Bash

· Experience working in a Linux/Unix development environment

General / Special Requirements

GENERAL

· Assist in ensuring a harmonious work environment in all departments that you are working with by upholding Thales' key values.

· An advocate for continuous improvement and knowledge sharing

· An advocate for diversity and inclusion who will be actively involved in implementing change initiatives to achieve our diversity goals

· An advocate for a culture of continuous improvement

· An advocate for Accountability, transparency and curiosity

· Comply with all relevant company Occupational Health, Safety and Environmental policies and framework and work practices with the intent of preventing or minimising accidental exposures to self, colleagues, visitors and/or the environment and to ensure a safe work practises at all times.

· Comply with all relevant Company policies and procedures.

SPECIAL REQUIREMENTS

· Occasional international travel may be required

Position Overview

Autodesk is seeking a highly motivated, experienced Senior Engineering Manager to join our Autodesk IAM Platform team. The Autodesk IAM platform is central to ensuring secure, seamless, and scalable access management across our suite of 150+ Autodesk desktop, mobile, web applications, and smart devices. This platform plays a critical role in managing authentication, authorization, user profiles, and entitlements, serving millions of customers daily and empowering a growing ecosystem of third-party developers and smart devices.

As a Senior Manager of Software Engineering, you will lead and oversee multiple teams of engineers dedicated to advancing our IAM platform. You will be responsible for the strategic direction, technical excellence, and delivery of innovative, secure, and robust IAM solutions. The platform you will help build needs to be highly resilient and available, ensuring that Autodesk’s services are reliable and performant at all times, even under the most demanding conditions.

The ideal candidate has extensive experience leading large teams in the development of modern cloud-based services, particularly in a fast-paced, agile environment. You should have a strong understanding of cloud security and be adept at driving the technical vision and strategy for identity services.

Your leadership will be critical in ensuring that Autodesk’s IAM services remain cutting-edge, resilient, and capable of supporting the evolving needs of our global customer base. You excel in mentoring engineering leaders, fostering a culture of innovation and security, and ensuring the successful delivery of complex, scalable IAM solutions.

Responsibilities

• Lead a team of software engineers to ensure execution and unlock creativity
• Develop staff by coaching, facilitating career aspirations and providing growth opportunities
• Regularly communicate with team members, provide feedback, conduct performance evaluation
• Build collaborative partnerships with the Software Architects, Technical leads, Product Owners, Product Managers and Experience Designers
• Create an inspiring team environment with an open communication culture. Foster continuous improvement and iteration
• Provide insight, feedback, and recommendations to senior management regarding the development, capabilities, and potential of current and future software projects
• Provide leadership to achieve high standards of “done” in areas of quality, security, scalability, user experience
• Aid in designing and building solutions, frameworks, automation, and orchestration for a broad range of applications and infrastructures, including cloud services and desktop solutions
• Collaborate with a geographically dispersed team and stakeholders
• Take complete ownership of the initiative and deliver it end to end while working with various stakeholders

Minimum Qualifications

• BS/MS in engineering, computer science, or equivalent industry experience
• 15+ years of relevant industry experience, with 7+ years of hands-on technical leadership and 7+ years of experience managing development teams
• Previously managed teams of engineers with ownership of high scale, production systems
• Experienced in one or more of the tech stacks and tools that includes AWS, Golang, C#, Python, Java etc
• Experienced in creating telemetry for the service using Splunk, New Relic, Datadog or their equivalents
• Skilled in big picture thinking and a willingness to learn and dive into unfamiliar systems and resolve complex and ambiguous issues both from a business and technical perspective
• Experience working in fast-paced, agile development environments, with a focus on iterative improvement and flexibility
• Proven ability to define and drive the technical vision and strategic direction for complex platforms
• Proven track record of leading large engineering teams with a focus on cloud-based services
• Experience in driving technical excellence and continuous improvement, ensuring the delivery of high-quality, scalable solutions
• Solid understanding of software development lifecycle, principles, practices, and methodologies
• Have insights about common engineering practice challenges and had experience of leading team to fix/improve them
• Willingness to collaborate with colleagues across different time zones which may require limited work outside normal working hours

The Ideal Candidate

• You understand what it takes to deliver scalable and secure IAM solutions
• Ability to define and drive the technical vision and strategic direction for complex platforms.
• Strong understanding of cloud security principles and best practices
• Experience working in fast-paced, agile development environments, with a focus on iterative improvement and flexibility.
• Ability to ensure the IAM platform is highly resilient and available, supporting reliable and performant Autodesk services.
• Excellent communication and collaboration skills to work effectively with cross-functional teams and stakeholders

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The National University of Singapore invites applications for Research Assistant for CAR-T cell manufacturing program in the Immune Cell Engineering Laboratory of the National University of Singapore. Our group is committed to delivering transformative and novel cellular therapies for patients with cancer. We have a strong track record of successful cell manufacturing for clinical trials in accordance with regulatory guidelines. Appointments will be made on a 2-year contract basis in the first instance, with the possibility of extension.

Purpose of the post

The role of the research assistant is to support immune cell manufacturing, including CAR-T cells, for several ongoing clinical trials. We are seeking highly motivated, conscientious and meticulous individuals to join our experienced team, be trained in Good Manufacturing Practices (GMP) and be involved in research aimed at improving the treatment of patients with cancer.

Main Duties and Responsibilities

1. work in a (GMP)-certified facility manufacturing immune cells for clinical use, including CAR-T cells.
2. apply various techniques in tissue culture, molecular biology, flow cytometry under rigorous GMP conditions, for which training will be provided.
3. work effectively within a team of other skilled cell engineers
4. be able to practice meticulous bookkeeping and documentation in accordance with regulatory requirements
5. Maintain the highest standard of professional conduct and record keeping in accordance with policies and procedures.
6. Assist with any other duties of a similar nature that are delegated by the PI.

Qualifications

The applicant should:

1. Have a Bachelor of Science degree in Biomedical Sciences (those with no experience are welcome to apply)
2. Have experience in general laboratory techniques, especially aseptic tissue culture techniques
3. Be able to work independently and in a team, have an investigative nature with great attention to detail
4. Have knowledge of computer applications, e.g. MS word, MS excel

Application

Remuneration will be commensurate with the candidate’s qualifications and experience. Informal enquiries are welcome and should be made to Dr Bernice Oh at [email protected]

Formal application: Please submit your application, indicating current/expected salary, supported by a detailed CV (including personal particulars, academic and employment history, complete list of publications/oral presentations and full contacts of three (3) referees to this job portal.

We regret that only shortlisted candidates will be notified.

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on a research project where you will be part of the research team to develop yeast and fungi for food ingredient and biochemical production. The specific goals are:

1. Metabolic engineering of Yarrowia and Candida yeasts for organic acid production
2. Design and optimization of fermentation method in 10L and 100L stirred tank vessels

Key Responsibilities:

• Fulfill the primary responsibilities within the project:
  i. Deliver structured presentations of research plans and findings every two weeks.
  ii. Provide guidance and mentorship to junior research engineers and undergraduate students working in the same research field.
  iii. Prepare scientific manuscripts for reporting and potential publication (as first or co-author).
• Prepare writeup for new research grant application
• Support undergraduate lab class conduct where applied research outcomes are utilized in undergraduate teaching.
• Conduct thorough risk assessments and ensure adherence to work, safety, and health regulations for all research activities.
• Coordinate procurement activities with licensed vendors for research items.

Job Requirements:

• Have a relevant PhD degree in Biochemistry or Biochemical Engineering
• Have at least 1 year experience with the metabolic engineering of Yarrowia and Candida yeasts, including foreign gene expression and gene deletion.
• Have at least 1 year experience with the use of bioreactor, HPLC-MS and GC-MS.
• Prior experience in the genetic manipulation of filamentous fungi cell line engineering is advantageous.

Key Competencies

• Able to build and maintain strong working relationships with people within and external to the university.
• Self-directed learner who believes in continuous learning and development
• Proficient in technical writing and presentation
• Possess strong analytical and critical thinking skills
• Show strong initiative, take ownership of work, and able to cope with failures

eqponsibilities :

• Maintenance of invoices i.e. scanning, updating and posting of invoices in system
• Processing of payments to vendors and perform bank reconciliation
• Liaison with vendors for missing invoices/payment status
• Attach daily bank advice in accounting system
• To perform ad-hoc duties as per assigned

Requirements

• O Levels/ LCCI / Certificate / Diploma in Accountancy or equivalent
• Computer skills and Microsoft Office
• Minimum 1 year of related experience

• To conduct / plan safety inspection to verify safety provision and provide recommendations for improvements conforming to worksite rules and regulations to comply with statutory requirements
• To investigate any accident, dangerous occurrence or occupational disease that occurred within the workplace and provide recommendations for countermeasures to prevent recurrence
• Implementation and revision of Risk Management
• Liaise with Ministry of Manpower on safety issues and safety statutory requirements
• Establish, update, maintain, and implement the Safety & Health Management System
• To conduct relevant safety training needs e.g. Safety induction, Permit to Work, Safe Work Procedures etc.
• Identify training needs for safety personnel and recommend the required training to ensure competency of the workforce.
• To conduct Safety Committee Meeting to address safety issues and ensure a safe working environment for all personnel
• Ensure in-house rules and regulations are implemented and enforced diligently at the worksite.
• Coordinate safety promotional activities to develop and maintain safety awareness among all personnel
• Evaluate, select and control sub-contractors to ensure awareness of their safety obligations on site
• Review, assess and maintain the Safety Data Sheets
• Ensure storage, movement, use, and disposal of hazardous substances and chemicals are well managed
• Ensure the register of hazardous substances is up to date
• Continuously review the emergency procedure and update.
• Manage and control situations arising during an emergency
• Plan and implement occupational health programs to protect workers from health hazards such as noise, dust, toxic gases, vapors and radiation
• Coordinate safety audit and ensure the closure of all findings
• Coordinate the preparation and submission of all required safety reports e.g. Integrated Management System (IMS) Quarterly report, Risk Assessment review
• Updates on codes of practice & safety literature and circulates information to each level of employees
• Monitor the Safety Performance of the project as set by the company policy and objectives e.g. Accident Frequency Rate (AFR), Accident Severity Rate (ASR) etc
• Person in charge of the workplace on environmental regulations pertaining to the Environmental Public Health (Registration of Environmental Control Officers) Regulations 1999
• Person in charge of the workplace implementation and revision of Environmental Management in the worksite
• Act as an Earth Control Measures Officer (ECMO)Ensure safety practices and housekeeping is to maintained to the highest standard

Requirements:-

• Must possess registered MOM WSH Officer license
• Min 3 years’ WSH Officer experience in Building projects

Responsibilities:

• To review, conduct incident / accident investigation and provide recommendations for countermeasures and to prevent recurrence of accident
• To coordinate of daily toolbox meeting and upkeep the records
• To conduct daily safety inspection and other type of safety inspection as required at work site
• To coordinate the immediate rectification of unsafe conditions and correct any safety malpractices on site
• Monitor and oversee the enforcement of In-house Rule and Regulation and ensure safe work practices on site
• Coordinate and conduct the safety induction course to all site staffs
• Submission of Quarterly EHS performance & 6-monthly review of Risk Assessment
• Ensure and to carry out duties in accordance to WSH Act & Integrated Management System
• Assist WSHO to establish, update, maintain, and implement the Safety and Health Management System
• To assist WSHO for all safety promotional activities, safety audits, safety meetings and execution of safety programmes

Requirements:

• Advanced Certificate in Workplace Safety and Health or equivalent
• Minimum 2 years of relevant working experience

Job Responsibilities:

• Responsible for the overall daily operations of Building Engineering that includes PSI, PFI and SLA.
• Liaison with clients or ground agencies for on-site inspection works.
• Collaborate with client on new project and prepare cost estimations for tenders or quotations.
• Strategize PSI, PFI, and SLA work schedules, as well as manage manpower and resource allocation.
• Carry out structure inspections to existing building structure or infrastructure to identify defects and repair when required.
• Review, plan and coordinates the operations of a field inspection section and manages inspection projects.
• Provide visionary, leadership and direction within the team.
• Manage quotations processes, filing and follow up on billing payments and invoicing related to Building Inspection.
• Review reports prepared by Engineers/Inspectors/subcontractors, ensuring timely submission within set deadlines.
• Monitor the progress of work for each project and ensure timely submission of progress payment claims to clients on a regular basis.
• Enforce adopted codes and regulations pertaining to building inspections to ensure safety and compliance.
• Stay updated on new rules, regulations and technical information disseminated through internal communication channels.
• Supervises Building Inspectors/Engineers and Sub-Contractors, including task prioritization, expenses management, leave scheduling, performance evaluations, training and recommendation on hiring, termination, and disciplinary actions.

Job Requirements

• Bachelor’s degree in civil engineering
• Minimum of 5 years of relevant work experience, with at least 2 years in a management role
• Strong leadership, communication, and organizational skills
• Proficiency in project management and inspection processes
• Knowledge of building code and regulations

Responsibilities:

• Engage and manage various stakeholders (internal and external) expectations and communication.
• Collaborate with functional teams to conduct cleanroom/facility planning and layout
• Carry out physical area/ floor marking, coordinate with functional teams in tool purchase, movement (in/out), tool relocation plan, project timeline and capacity update.
• Perform risk analysis of various project options and outcomes
• Maintain and validate capacity/capital/space models to enable accurate assessment of wafer fabrication and operations loading needs
• Support operational efficiency improvement efforts (cycle time, OEE improvement, capacity optimization, space optimization)

Requirements:

• Degree in Engineering (Industrial & Systems Engineering), Mechanical, or relevant field;
• Proficient in AutoCAD 2D/3D and Simulation Tool preferred
• Proficient with Microsoft Words, Excel and PowerPoint proficiency
• Preferably to have industrial engineering experience in a semiconductor/ manufacturing environment
• Ability to work independently and team player to deliver in fast paced and collaborative environment

Responsibilities:

• Engage and manage various stakeholders (internal and external) expectations and communication.
• Collaborate with functional teams to conduct cleanroom/facility planning and layout
• Carry out physical area/ floor marking, coordinate with functional teams in tool purchase, movement (in/out), tool relocation plan, project timeline and capacity update.
• Perform risk analysis of various project options and outcomes
• Maintain and validate capacity/capital/space models to enable accurate assessment of wafer fabrication and operations loading needs
• Support operational efficiency improvement efforts (cycle time, OEE improvement, capacity optimization, space optimization)

Requirements:

• Degree in Engineering (Industrial & Systems Engineering), Mechanical, or relevant field;
• Proficient in AutoCAD 2D/3D and Simulation Tool preferred
• Proficient with Microsoft Words, Excel and PowerPoint proficiency
• Preferably to have industrial engineering experience in a semiconductor/ manufacturing environment
• Ability to work independently and team player to deliver in fast paced and collaborative environment

PharmEng Technology has been providing quality services to leading manufacturers of healthcare and pharmaceutical products since 1997. Our specialists hold expertise in Commissioning & Qualification, Validation, Quality Systems, Regulatory Affairs, Engineering, and Training to ensure that our clients can keep on providing the world with their cost-effective and high-standard healthcare products. At PharmEng Technology, we strive to cultivate the best working environment where empowerment, passion and perseverance are nurtured while serving our clients to achieve their unique business goals. We are seeking an experienced Manufacturing Engineering Technician with experience in pharmaceutical company/Life Science industries for a role in Singapore.

Responsibilities:

1. Provide technical support to manufacturing operations, including equipment setup, troubleshooting, and maintenance to ensure smooth production processes.
2. Assist in the development and optimization of manufacturing processes, collaborating with engineers and other team members to implement improvements and innovations.
3. Conduct routine inspections and tests on manufacturing equipment and systems to ensure compliance with regulatory standards and quality requirements.
4. Participate in the validation and qualification of manufacturing processes and equipment, documenting procedures and results according to regulatory guidelines.
5. Support continuous improvement initiatives by analyzing data, identifying opportunities for efficiency gains and waste reduction, and implementing corrective actions.
6. Adhere to Good Manufacturing Practices , Standard Operating Procedures, and safety protocols to maintain a safe and compliant work environment.
7. Collaborate with cross-functional teams, including production, quality assurance, and regulatory affairs, to resolve issues and achieve production goals.
8. Provide training and guidance to production personnel on new processes, equipment, and procedures to ensure effective implementation and adherence to standards.

Qualifications:

• Associate degree or technical certification in engineering, pharmaceutical sciences, or a related field; Bachelor's degree preferred.
• Prior experience in pharmaceutical manufacturing or a regulated industry is a plus.
• Strong mechanical aptitude and hands-on experience with manufacturing equipment and instrumentation.
• Knowledge of Good manufacturing practices regulations, and industry best practices for pharmaceutical manufacturing.
• Excellent problem-solving skills and attention to detail, with the ability to analyze data and troubleshoot technical issues effectively.
• Strong communication and interpersonal skills, with the ability to collaborate effectively in a team environment.
• Ability to work independently, prioritize tasks, and adapt to changing priorities in a fast-paced environment.
• Willingness to work flexible hours, including weekends and holidays, as needed to support manufacturing operations.

Why PharmEng Technology?

Our consultants come from different areas of the Pharmaceutical/Biotech/Medical Device industries and have extensive experiences obtained from world-class organizations in North America, Europe, and Asia. At PharmEng Technology, we value everyone’s unique talents and work together to support our clients. We offer continuous career growth, competitive wages, opportunities for travel and a team mentality that sets us apart from our competitors. It is the growth of our staff that continues to grow our company globally.

EEOC Statement

At PharmEng Technology, we don’t just accept difference — we celebrate it, we support it, and we thrive on it for the benefit of our employees, our clients, and our community. PharmEng Technology is proud to be an equal opportunity workplace.

Job Title: Accounting Manager

Company: S L Marine Engineering Pte Ltd

Industry: Building and Repairing of Ships, Tankers, and Other Ocean-going Vessels (Including Conversion of Ships into Offshore Structures)

Job Description:

- Oversee the preparation of accurate financial reports, including balance sheets, income statements, and cash flow statements.

- Provide detailed financial analysis to management, offering insights into company performance and recommendations for improvement.

- Ensure compliance with local and international financial regulations and accounting standards.

- Develop and manage annual budgets and forecasts in alignment with the company’s strategic goals.

- Monitor financial performance against budgets, identifying variances and advising corrective measures.

- Work closely with other departments to ensure budgetary control and efficient resource allocation.

- Manage the day-to-day accounting operations, including accounts payable, receivable, payroll, and general ledger.

- Maintain accurate records of all financial transactions related to shipbuilding, repair projects, and offshore structure conversions.

- Oversee tax filings, audits, and financial compliance with government regulations.

- Implement cost-effective accounting and financial practices to optimize profitability.

- Develop strategies to minimize financial risk, including currency and cost fluctuations within marine engineering projects.

- Collaborate with project managers to track project costs, ensuring all expenditures are within budget.

Requirements:

- Diploma in Accounting, Finance, or a related field.

- Strong knowledge of Singapore Financial Reporting Standards (SFRS) and tax regulations.

- Proficiency in accounting software and financial management systems.

- Excellent analytical, organizational, and communication skills.

About the Power Generation & Energy – Senior Technical Consultant role:

In this consultative heavy role, you will be assigned to project teams to provide strategic, unbiased and objective advisory services to clients to assist them in solving issues, creating value, maximizing growth and improving business performance. You will also be responsible for contributing to and working on internal projects focused on the ‘Worley Consulting Way’.

Key Responsibilities :

• Collaborate with cross functional teams to deliver on key responsibilities in an assignment under tight deadlines.
• Draft written communication including reports, presentations, contractual letters and project plans.
• Ability to analyze technical problems and solve them without experiencing any stress. Experience in conceptual design of Power and electrical engineering systems and equipment’s is needed.
• Interview the client's employees, management team and other stakeholders as required for the assignments.
• Performa data/risk/business/financial analysis and integrate large volumes of data from various sources to create reports.
• Participate and contribute to client meetings.
• Produce plans and budgets relating to assignment management.
• Plan and manage some elements of an assignment - plan, time, cost, outcomes etc.
• Participate in the development of a safe and healthy workplace.

Key Skills and Competencies :

• Experience in the field of power generation design, techno-commercial evaluation of bids, proposals, tender submissions, Lender technical advisory role for project financial close as well project finance.
• Experience in Project execution in the field of power generation using gas to power, biomass fuels, renewables (wind / Solar / Waste to Energy), coal and for co-generation.
• Experience in supporting the development of Power Projects (Gas to Power, Coal, Biomass, Waste to Energy, solar and Geothermal), Lenders Technical Advisory Role with Banks for the successful completion of project financial close is preferred.
• Experience in Thermoflow modelling (for Mechanical) or Static and Dynamic Power System study (for Electrical) for grid connections is highly desirable.
• Experience in conducting technical design review with EPC Contractor for the implementation of power generation projects in Coal, Gas to Power, biomass, renewables (Wind / Solar / Waste to Energy) energy sector.
• Technical Support to project manager tender evaluation phase, subsequent negotiation phase as well as the project implementation phase on site including erection and commissioning.
• Experience in electrical equipment sizing and preparation technical specification for the various electrical equipment involved in the project.
• Experience in dealing with Chinese EPC contractor is preferable.
• Demonstrated flexible and adaptable approach and able to operate in different ways in different situations.
• Strong research and organization skills and ability to work independently and think critically.
• Excellent presentation, written and verbal communication skills.
• Confidence in dealing with senior people in organizations.
• A proactive approach to project delivery and business development.
• Collaborative team player and be able to demonstrate research skills.

Key Requirements:

• Degree in Mechanical or Electrical Engineering with 5 to 12 years of experience in Consulting, and/or EPC Contractor in reputed international organization
• Candidates with a double degree in engineering or experience with Renewable Energy projects will be looked favorably.
• Experience in providing project and business solutions to clients in the infrastructure and resources sectors highly preferable.

Hiring Lorry Driver

With/Without Experience Class 4 Driving Licence

Working at Pandan Loop Area,

Local Company Direct Hire

No agent Fees

Contact us through Whatsapp 81330203

Or call us at 67450323

Working Hours:

Mon-Fri: 8.30am - 5.30pm

Sat: 8.30am - 12.30pm

Only Singaporean or Permanent Residence

About Wilmar International

Wilmar International Limited is Asia’s leading agribusiness group. Wilmar is ranked amongst the largest listed companies by market capitalisation on the Singapore Exchange. At the core of Wilmar’s strategy is an integrated agribusiness model that encompasses the entire value chain of the agricultural commodity business, from cultivation, processing, merchandising to manufacturing of a wide range of agricultural products. It has over 500 manufacturing plants and an extensive distribution network covering China, India, Indonesia and some 50 other countries. The Group has a multinational workforce of about 100,000 staff. More information about Wilmar International can be found online (http://www.wilmar-international.com/).

About Singapore

Singapore is a vibrant, cosmopolitan city-state. It features a rich Asian heritage and an eclectic mix of cultures, each bringing with them their language, customs, festivals, architecture, and last but not least, food. Singapore has a tropical climate, and its many parks and green spaces allow for outdoor activities all-year-round. The city hosts many international cultural, sports and music events, offers modern style living and excellent education and healthcare. Situated in the heart of Southeast Asia, Singapore is a gateway to explore Asia and the Pacific region

Scientist Position in the field of Enzyme Engineering

Wilmar International Limited has established a world-class research center dedicated to advancing green technology and food innovation. Our center combines cutting-edge technologies and state-of-the-art instruments to drive research innovation. With a commitment to a greener and sustainable future, our research focuses on developing enzymes as biocatalysts to replace toxic and harmful chemical processes. For enzymes to be effective in industrial applications, they require continuous improvement and optimization. The objectives of our research program are to develop versatile high-throughput screening platforms to engineer enzymes that meet industrial needs efficiently.

Job Responsibilities:

• Engineer enzymes to improve thermostability, kinetics, or substrate specificity to meet industrial needs.
• Set up high-throughput screening systems for activity validation.
• Communicate research findings and apply them within Wilmar factories to develop new manufacturing processes and products using green technology.

Job Requirements:

• A Ph.D. degree in life sciences or biochemistry with focus on enzyme and protein engineering
• Strong structural biology skill
• Ability to set up high-throughput screening assays.
• Excellent communication skills and a team player.
• Ability to work independently.

Key Responsibility:

• Handle customer enquiries by providing accurate and timely information on products, services, and lead times.
• Register new customers in system and assist in managing existing customer credit limits.
• Prepare and issue quotations for products and services based on customer requirements, and follow up with customers to secure orders.
• Liaise with internal teams to confirm stock availability, coordinate production schedules, and align on lead times.
• Coordinate and confirm delivery schedules with customers, ensuring all logistics are arranged according to agreed timelines.
• Review and process customer orders, ensuring all necessary details are captured for accurate sales order creation.
• Collaborate closely with Operation Lead to synchronize delivery timelines, ensure stock availability, and manage customer expectations.
• Process customer requests for site activation and part replacements by liaising with Operation Lead to ensure seamless service execution and post-visit follow-up.
• Generate, file and maintain accurate records of customer interactions, orders, and transactions, including quotation, purchase orders, sales orders, delivery orders, reports and invoices.
• Process Request for Invoice and submit invoices to customers, follow up on billing issues, and track payment status to support timely collection.
• Assist in requesting credit block releases and support finance team in ensuring timely payment from customers.
• Provide backup support for sales-related tasks as needed, including customer follow-ups, order tracking, and resolution of any issues that arise.
• Assist with scheduling tasks and help maintain job planner updates for production timelines and service-related jobs.

Requirements:

• 2 to 4 years of relevant experience in customer service, order management, or sales support
• Industry experience in a technical or product-focused environment (e.g., manufacturing, engineering or logistics) is preferred. Candidates without this background will be provided with on-job training and opportunities to develop industry-specific knowledge after hiring.
• Hands-on experience with ERP systems (e.g., SAP) and CRM tools (e.g. Salesforce) for managing customer interactions, order tracking and documentation is highly desired.
• Understanding of full product order lifecycle, including quotation management, inventory checks and delivery scheduling, or a willingness to learn these processes.
• Strong organizational skill with the ability to handle multiple tasks and prioritize effectively.
• Excellent communication and interpersonal skill for professional interaction with customers and internal teams.
• Proactive problem-solving ability to handle customer enquiries and resolve issues independently or escalate when needed.
• Detail-oriented, ensuring accuracy in order processing, documentation, and reporting.
• Team collaboration skill to work closely with other departments to meet customer and project requirements.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The successful candidate will work with Barbaros Oezyilmaz and Dr Toh Chee Tat on for lab support, sample preparation and characterization under a project on Synthesis and application of atomically thin amorphous materials on the surface of 2D semiconductors as a protective and seed layers for other

The main responsibilities of the position include:

1. Synthesis of multilayer MAC films on the surface of 2D crystals, insulators and other substrates. Their analysis by Raman spectroscopy, AFM, Ellipsometry.
2. Test of the application of ML-AC as a seed layer for ALD grown insulators.
3. Perform impedance spectroscopy to probe dielectric properties of dielectrics deposited on the surface of MAC.
4. Data analysis and physical interpretation of the results.
5. Manage lab safety, equipment maintenance and operations.
6. Meet key deliverables for industry collaboration.

Qualifications

Qualifications / Discipline:

Bachelor's or Master's degree in materials science, microelectronics, or a related field.

Skills:

Strong verbal communication skills in English, ability to solve problems and generate new ideas

Experience:

1. One year hands-on experience in lab
2. One year internship/research assistant or any equivalent in lab
3. First-hand experience with operation and maintenance of CVD reactors and vacuum systems
4. Experience with electronics and the use of clean room is desirable

.Supervise project team and sub-contractors to take positive actions and accountability for their assigned work and complete their works on time as per agreed.

· Liase with Client, Consultants and Project team for planning, executive and completion of projects.

· Manage and supervise the team of technical staff and subcontractors carry out maintenance services, schedules, improvement works . To make sure standards of building performance, quality, time and cost schedules and safety complied.

· Leading monthly meetings and submission of routine reports.

· Oversea and overall responsible for works carried out by Junior Supervisors assigned.

· Responsible for keeping daily work schedule.

· Attend regular meetings with client , supplier and sub-contractors.

· Analyze, manage and track projects costs against budget

Position Summary:

• Responsible to work as Principal Electrical Designer

Responsibilities:

• The Principal Electrical Designer shall assist the Lead Engineer/Engineer on the design of drawings, basic calculations, and material take-off and ensure timely execution of deliverables
• Should conversant with PDMS/E3D/PDS/Smart3D. Working knowledge in Smart Plant Electrical will be an added advantage
• The Principal Electrical Designer can develop SLDs, control schemes & wiring diagrams
• Can perform layout design and drafting of cable tray/power/grounding/lighting /lightning protection layouts in AutoCAD/Microstation
• Able to perform basic calculation like cable sizing and lighting. earthing calculations
• Coordination with other discipline drawings and clash checking verification and collection of inputs from site, coordination with site supervisor for verification of site installation of cable routing, lighting and grounding
• Adherence to Quality Management System and mainteance of all squad check drawings / deliverable check lists / check prints
• The Principal Electrical Designer is expected to perform the duties of in a large/medium sized projects

Requirements

• Diploma/Degree in Electrical Engineering
• Minimum experience: 15 years' experience in electrical design in design consultancy firm or in engineering department of process industry firm.
• Familiarity with both international and local codes & standards is required

• Source for tenders
• Analyse tender documents, drawings and specifications
• Conduct quantity take off and estimate costs
• Coordinate with suppliers and sub-contractors to prepare costing for tender submission
• Prepare tender and supporting documents for submission
• Follow up on any technical clarifications during post-tender stage
• Attend site showrounds and tender interviews
• Prepare sub-contractor agreement, work order and VO
• Monitor project progress and control budget
• Collaborate with Project Team to track work progress for claim submission to Main Contractor
• Assess sub-contractor's monthly claims and prepare payment certificate/response

Job Requirements

• Degree / Diploma in Mechanical Engineering or equivalent.
• Minimum 2-4 years experience in Construction, preferably in handling ACMV / HVAC projects for building construction industry.
• Knowlegeable of ACMV details, local codes and regulations.
• Strong interpersonal and written communication skills.
• Ability to work independently while being a good team player.
• Strong follow up and closure skills