• Assisting in setting up the test equipment for production and engineering team.
• Handle all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.

Requirements:

• Nitec in Electronics / Electrical Engineering, Mechanical, Biomedical, Mechatronics
• Able to work rotating 12-hr shift

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Job Descriptions:

• Responsible for day to day driving for site staffs for appointments, meetings and etc.
• Execute despatch tasks from HQ and project site when necessary.
• To take care assigned car and always keep the assigned car clean and neat condition.
• To do periodic maintenance and servicing.
• To obey and adhere to all traffic regulations during the course of carrying out your duties.
• Punctual and stand by the car as instructed earlier.
• To operate the company vehicles in a safe manner.
• At all times, the company vehicle is to be returned to the company car park at the end of the day when your duties end.
• To keep log record on daily basis and report to Factory Admin for record.
• Without special reason, shall adhere to company regulation on attendance.
• Perform any other tasks/responsibilities which are assigned by bosses.

Requirements

• Holding Singapore Driving Licence.
• Savvy in using WhatsApp, Waze and Google map.
• Able to work weekends/public holiday and overtime as and when required by management.
• Well discipline with good and pleasant personality

• Assisting in setting up the test equipment for production and engineering team.
• Handle all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.

Requirements:

• Nitec in Electronics / Electrical Engineering, Mechanical, Biomedical, Mechatronics
• At least 2 years of relevant working experience
• Able to work from 7am - 7pm

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Assisting in setting up the test equipment for production and engineering team.
• Handle all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.

Requirements:

• Nitec in Electronics / Electrical Engineering, Mechanical, Biomedical, Mechatronics
• Able to work rotating 12-hr shift

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Assisting in setting up the test equipment for production and engineering team.
• Handle all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.

Requirements:

• Nitec in Electronics / Electrical Engineering, Mechanical, Biomedical, Mechatronics
• At least 2 years of relevant working experience
• Able to work from 7am - 7pm

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Job Description

• Use of Building Information Modelling (BIM) to perform drawing work tasked
• Report to the manager/engineer in charge and perform work task assigned
• Monitor modeling/update drawing/ inform Project Manager if there is any changes
• Liaise with architect
• Input finishing with more details (if any)
• Monitor/checking if there is any crashing
• Coordinate and monitor shop drawing submission schedule.
• Produce shop drawings as per detail given by engineer/manager
• Able to produce revised shop drawing within one week upon receiving commented drawing.
• Familiar with program: Revit Archi and Revit MEP for drawing
• Familiar with program: Navis for checking the drawing

Requirements

• Diploma in Civil / Structure / Building
• Min 2 years experience in related field for this position
• Proficiency in BIM software, such as Autodesk Revit, ArchiCAD, or Bentley AECOsim.
• Strong understanding of architectural and construction principles.
• Knowledge of structural and MEP systems and their integration into the BIM model.
• Attention to detail and ability to identify and resolve clashes or discrepancies in the model.
• Communication and collaboration skills for effective teamwork with other design and construction professionals.
• Understanding of construction processes and workflows.

RESPONSIBILITIES

• Monitoring & Issuing of aircraft planned tasks
• Liaising with SIA Planning section on tasks issuance
• Liaising with SIAEC Operations planners on planned tasks
• Updating reports on planned tasks status
• Any relevent projects

REQUIREMENTS

• Diploma from a local Polytechnic or minimum Higher NITEC
• Proficient in MS Office
• Open to fresh graduates (diploma/higher NITEC)
• Experience in SAP is an added advantage
• 2 year administrative experience is advantageous

Program Implementation & Control (PIC)

• Monitor the compliance requirements of the checks and its associated tasks
• Review & schedule all maintenance tasks and preparation of Works Program.
• Develop & provision for material & tooling requirement and co-ordinate with other operational departments for smooth tasks execution.
• Implement and track approved modification programs.
• Coordinate with the MRO on the completion of tasks and follow-up with any discrepancies or issues.
• Support issuance of adhoc assignments and any other duties as assigned by his/her supervisor.

Requirements:

• Min Diploma in Mechanical / Mechatronics / Manufacturing / Aerospace / Aeronautical Engineering from a local Polytechnic
• Experience in production planning / project management would be an advantage
• Strong analytical skills,adaptable and pro-active
• Proficient in MS Office Suite

Quantity Surveyor (Tender)

Salary range: $3,000 - $5,000

Working days : 5 days (Mon-Fri 8.30am to 6pm)

Location: Near Novena MRT (Office at United Square) / Thomson Rd

Job Requirements:

• Minimum Diploma in Civil Engineering / Building / Quantity Surveying or equivalent
• Minimum 3 years of relevant work experience in construction industry
• Proficient in Measurement Software

Job scope

• Assist in preparation and submission of tender quotations and ensure timeline are met for every tender.
• Quantity take-off for all the tenders, in the form of manual measurement and update the amendment changes of the tender
• During tender stages, sourcing of quotation for rates and technical data are required due to every project’s requirement varies.

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Solar Project Manager
Working Hours: Monday-Friday 9.00 - 6.00pm
Address: Kallang
Salary : $4000-$5000

Requirement:

• Diploma/Degree in Electrical Engineering or related fields

• 3-4 Years of experience in Mainly Solar project management

• Candidate with experience in solar project execution will be in advantage

• Knowledge in energy modelling software (PVsyst), Autocad and construction modelling software

Job Scope:

1. Project Planning and Execution:
2. Develop comprehensive project plans for solar energy systems , outlining scope, objectives, deliverables, and timelines.
3. Coordinate with engineering, procurement, and construction teams to ensure project milestones are met
4. Monitor project progress and implement necessary adjustments to achieve project goals.
5. Stakeholder Management:
6. Collaborate with internal teams, contractors, suppliers, and regulatory agencies to ensure alignment with project requirements for both solar and EV infrastructure projects.
7. Serve as the primary point of contact for client communication, addressing inquiries, concerns, and providing regular project updates.
8. Budget and Resource Management:
9. Prepare and manage project budgets for solar, forecasts, and expenditures.
10. Procure necessary materials, equipment, and resources to support project activities for both solar and EV infrastructure projects.
11. Identify cost-saving opportunities and implement efficient resource utilization strategies.
12. Quality Assurance and Compliance:
13. Implement quality control measures to ensure adherence to industry standards and project specifications for both solar and EV infrastructure projects.
14. Monitor regulatory compliance and obtain necessary permits and approvals for project implementation.
15. Risk Management:

a. Identify project risks and develop mitigation strategies to minimize potential impacts.

b. Proactively address issues and challenges to maintain project momentum and achieve successful outcomes.

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we’re the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain — and we’re looking for talented people who want to help.

You’ll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You’ll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you’ll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion.

As an Electrical Colo Regional Engineer, you will be leading projects to fit out the data centers we support to meet ever-evolving customer needs as we continue expanding our fleet to hyper-scale. As an ideal candidate you:
* Possess Strong Engineering Judgement and are able to provide recommendations despite uncertainty
* Are detail and data oriented
* Have experience managing engineering projects and consultants.
* Build trust and relationships with different stakeholders (e.g., Business Development, Operations, Commissioning, Construction and Design)
* Be inclined to get into the field to see things up close.

Key job responsibilities

• Work with colo vendors to review the design for new Data Centers in your region, including design input, submittal review and incorporating AWS products to ensure the design is meeting AWS expectations.
• Act as resident engineer during new colo construction projects. Support construction, commissioning, and handover.
• Troubleshoot, conduct Root Cause Analysis (RCA) and create Corrective Action (CA) documentation for site/equipment failures.
• Directly support operational issues with ad-hoc training, complex operating procedure reviews, including essential equipment, and event support.
• Provide technical support to the design for existing data center upgrades and design-solutions, which add capacity, improve availability, and increase efficiency.
• Supporting operating partners to lead, review, and approve designs for existing co-location (colo) data center upgrades which improve availability/efficiency.
• Interface with operating partners, data center design engineering team, server hardware team, environmental health and safety team to promote standards that maintain consistency and reliability in services delivered by operating partners.
• Work on concurrent projects, sometimes in multiple geographical regions.
• Initiate and lead engineering site audits within leased or colo data centers. Produce reports outlining risks with recommended mitigations and remediation's.

Position title : PROJECT COORDINATOR

Location: Tuas Ave 16

Working Days: 5 days A Week [need to attend to site problems over the weekend on a need basis ]

Working hours : 8am – 5pm / 9am – 6pm

Salary : depending on experience, from $3.2k - $4k
(Need not own car, Travel based on reimbursement basis)

Overview:

• We are a public-listed company that specialises in the manufacturing of steel prefabricated reinforcement for the construction industry. We are seeking suitably qualified personnel to join our team.

Roles & Responsibilities:

• Coordinate deliveries by checking / amend order as per site progress
• Attend to site discussion / resolving missing items as and when necessary
• Handle errors or resolving problems related to site
• Maintain records of site projects and ensure proper filing for easy retrieval
• Any other duties as and when assigned

Job Requirement

• Min diploma in Structural/Civil Engineering/ Structural Engineering Design

Interested Personal kindly contact WhatsApp :+65 8833 7969(Lydia)

OR

Email to : [email protected]

Lydia Chieng Zhi Yee Reg No: R1988890

The Supreme HR Advisory Pte Ltd EA No: 14C7279

• Assisting in setting up the test equipment for production and engineering team.
• Handle all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.

Requirements:

• Nitec in Electronics / Electrical Engineering, Mechanical, Biomedical, Mechatronics
• Able to work rotating 12-hr shift

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Assisting in setting up the test equipment for production and engineering team.
• Handle all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.

Requirements:

• Nitec in Electronics / Electrical Engineering, Mechanical, Biomedical, Mechatronics
• At least 2 years of relevant working experience
• Able to work from 7am - 7pm

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Assisting in setting up the test equipment for production and engineering team.
• Handle all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.

Requirements:

• Nitec in Electronics / Electrical Engineering, Mechanical, Biomedical, Mechatronics
• Able to work rotating 12-hr shift

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Assisting in setting up the test equipment for production and engineering team.
• Handle all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.

Requirements:

• Nitec in Electronics / Electrical Engineering, Mechanical, Biomedical, Mechatronics
• At least 2 years of relevant working experience
• Able to work from 7am - 7pm

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Position: Engineering Technology Department Engineer

Salary: 5,000 SGD/month

Number of Positions: 1

Job Description:

We are seeking a skilled and experienced Engineer to join our Engineering Technology Department. The successful candidate will play a key role in managing and executing engineering projects, leveraging technical expertise to solve complex problems and ensure project success.

Key Responsibilities:

• Project Management: Oversee and manage the full lifecycle of engineering projects, including planning, execution, and completion. Ensure projects are delivered on time and within scope.
• Engineering Practice: Utilize engineering knowledge and skills to undertake projects of varying scales. Apply professional standards and practices to ensure high-quality outcomes.
• Technical Expertise: Demonstrate solid professional knowledge in electrical, mechanical, or civil engineering. Use engineering software proficiently and understand relevant technical standards and specifications.
• Problem Solving: Analyze engineering problems, identify key issues, and develop reasonable and feasible solutions to address them effectively.
• Documentation and Communication: Read, understand, and produce technical documents and reports in English. Communicate effectively in both written and oral forms, including interpreting English technical literature.

Qualifications:

• Education: Bachelor’s degree or higher in Electrical Engineering, Mechanical Engineering, Civil Engineering, or a related field.
• Experience: Relevant engineering practice experience with familiarity in managing the entire process of engineering projects. Experience in independently handling projects of a certain scale is preferred.
• Professional Skills: Solid knowledge of engineering principles and practices. Proficiency in using engineering software and a strong understanding of engineering standards and specifications.
• Problem-Solving Skills: Ability to accurately identify engineering problems and propose effective solutions.
• Language Skills: Strong English reading, writing, and speaking skills, with the ability to interpret technical literature and engineering materials.

Additional Information:

• Bonuses and related benefits are available.
• The role requires strong technical abilities and problem-solving skills.

• Assisting in setting up the test equipment for production and engineering team.
• Handle all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.

Requirements:

• Nitec in Electronics / Electrical Engineering, Mechanical, Biomedical, Mechatronics
• Able to work rotating 12-hr shift

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Job Description:

· Lead R&D Projects: Drive the design, development, and innovation of interventional medical devices, ensuring projects are completed on time, within scope, and budget.

· Product Development: Oversee the product development lifecycle including feasibility studies, prototyping, preclinical and clinical validation, design for manufacturability (DFM), and regulatory approvals.

· Technical Leadership: Provide technical direction, mentoring, and leadership to a multidisciplinary team of professionals and engineers.

· Collaboration: Work closely with cross-functional teams (clinical, regulatory, manufacturing, marketing, and quality) to ensure seamless product development and alignment with business goals.

· Regulatory Compliance: Ensure that products comply with relevant regulatory standards (e.g. FDA, CE Mark, ISO 13485) and manage interactions with regulatory bodies.

· Innovation and Strategy: Identify emerging trends and technologies in the interventional medical device field, incorporating them into product development strategies.

· Vendor and Partner Management: Collaborate with external partners, suppliers, and contract manufacturers to achieve product development goals.

· Budget and Resource Management: Manage the R&D budget, resource allocation, and project prioritization to optimize development efficiency and output.

· Risk Management: Identify and mitigate technical and project risks throughout the development process.

Requirements:

· Bachelor Degree in Biomedical Engineering, Mechanical Engineering, or related field. Master’s or Ph.D. preferred.

· Minimum of 10 years of experience in R&D within the medical device industry, with at least 5 years focused on interventional medical devices (e.g. catheters, stents, Sheaths, etc.).

· Proven track record of leading product development from concept to market launch.

· Strong knowledge of regulatory requirements and quality systems for medical devices (e.g., FDA, CE Marking, ISO 13485).

· Experience managing R&D teams, including engineers, scientists, and technical staff.

· Excellent leadership, communication, and organizational skills.

· Strong problem-solving abilities and a high level of technical competence in medical device engineering.

· Ability to manage multiple projects simultaneously, balancing technical challenges and business priorities.

· Familiarity with Design Control, Risk Management, and Human Factors Engineering processes.

• Assisting in setting up the test equipment for production and engineering team.
• Handle all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.

Requirements:

• Nitec in Electronics / Electrical Engineering, Mechanical, Biomedical, Mechatronics
• At least 2 years of relevant working experience
• Able to work from 7am - 7pm

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Job Description:

1. To perform packing of goods accordingly to work instructions/shipment requirement.

2. To perform and control store general admin data entries and ensure proper store admin duties (if any requirement) of (Standard Operations Procedure- SOP).

3. To receive daily in-coming goods/stock and perform all inventory management include all inventory/stock data entries.

4. To assist in store administrative duties and general paper filing includes store general packing duties.

5. To assist superior in any ad-hoc store general admin from time to time.

Requirements:

Min. Primary/Secondary level with computer literacy (Microsoft office).

Physically fit and able to perform counting.

Job Description & Requirements

1. Clean designated facility areas (dusting, sweeping, vacuuming, mopping etc.)

2. Clearing of waste and rubbish bags to garbage area.

3. Perform and document routine inspection and maintenance activities.

4. Notify Superior of deficiencies or needs for repairs.

5. Perform minor repairs.

6. Maintain sufficient cleaning materials and supply.

7. To provide and maintain all designated working areas, house-keeping -5S and ensure all general cleaning practices are in accordance to A & One Precision best practices and other practices which the Company may introduce from time to time.

8. To maintain good workplace health and safety rules and regulations compliances at all time in store/workplace.

Education level:

Min. Primary education.

Experience level:

1. Two (2) years in relevant experience in cleaning Factory environment.

Result oriented, resourceful and independent with minimum supervision.

Position title : PROJECT COORDINATOR

Location: Tuas Ave 16

Working Days: 5 days A Week [need to attend to site problems over the weekend on a need basis ]

Working hours : 8am – 5pm / 9am – 6pm

Salary : depending on experience, from $3.2k - $4k
(if have own vehicle, transport allowance $1600 including petrol & maintenance)

Overview:

• We are a public-listed company that specialises in the manufacturing of steel prefabricated reinforcement for the construction industry. We are seeking suitably qualified personnel to join our team.

Roles & Responsibilities:

• Coordinate deliveries by checking / amend order as per site progress
• Attend to site discussion / resolving missing items as and when necessary
• Handle errors or resolving problems related to site
• Maintain records of site projects and ensure proper filing for easy retrieval
• Any other duties as and when assigned

Job Requirement

• Min diploma in Structural/Civil Engineering/ Structural Engineering Design

Interested Personal kindly contact WhatsApp :+65 8833 7969(Lydia)

OR

Email to : [email protected]

Lydia Chieng Zhi Yee Reg No: R1988890

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Resident Engineer (C&S)

Job Description & Requirements

• To check the correctness and integrity of all form works and steel reinforcements for concrete structural members and make necessary adjustments to ensure that they are the same as in the design.
• To check and ensure the correctness of the retaining wall, ground anchor and other soil stabilisation system, as in the design.
• To check and ensure the correctness of site clearance in accordance to approved plans from relevant agencies (i.e with reference to Nparks approved DC and tree felling plan).
• To ensure the implementation of each control measures and vector control in compliance with regulations.
• To supervise the project to ensure that the works are constructed in accordance to the project specifications, construction drawings and Building Control Act and Regulations.
• Provide administrative control and maintaining proper records including site attendance, leave records, overtime records and inspections checklists.
• Review Contractor's submissions, work method statements and work demonstrations.
• Conduct regular site inspections and resolve site discrepancies to prevent delays.
• Attending site meetings, highlighting foreseeable problems and recommending possible solutions, progress, variation and coordination meetings.
• Manage a team of technical supervisors on site to ensure that all site activities comply with the regulations and client's requirements.
• Report to C&S QP, work closely with the regulatory authorities and contractors to provide supervision on site, resolve all site issues and ensure timely completion of the projects.
• Carry out supervision of structural works by identifying any non-conformity of contractor's works on site and regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM.
• Minimum 3 years of relevant experience as RE for LTA project.

• Assisting in setting up the test equipment for production and engineering team.
• Handle all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.

Requirements:

• Nitec in Electronics / Electrical Engineering, Mechanical, Biomedical, Mechatronics
• Able to work rotating 12-hr shift

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996