Job Description & Requirements

ASNT NDT Level III, PCN NDT Level III, Advanced NDT Specialist

Familiarisation of ASME & API Codes & Standards

Ability to assume full technical responsibility for clients’ NDT facilities.

Proven experience of providing solutions to clients’ NDT inspection related problems.

Maintain all of equipment and consumable storage in the store room to be ready for using with good conditions under acceptance criteria specific by client or international standard.

Willingness to be flexible and multi-task as part of a team, and contribute to company objectives.

Strongly motivated to achieve results, with a high degree of professionalism, honesty and integrity.

Excellent organizational and time management skills, able to priorities workloads with competing deadlines.

Good written skills to produce coursework and training materials, as well as clients’ NDT procedures, written practices, techniques and audit reports.

Provide internal trainiand technical guidance for other inspectors

Ensure that all personal certification is kept up to date.

Develop and approve NDT procedures, written practices and NDT techniques to a high standard that comply with clients

Creative skills to plan and deliver lessons in a professional, positive and engaging manner.

Ensure adequate training and cross checking the site works, share knowledgewith team members and contribute to team development.

To analyse work plans and projects, and as well as recommendations of every working unit; and to give advice on safety measures to the employer.

Feedback on revised Equipment’s and software’s for improvement.

Feedback after testing the new equipment on site for improvement.

Extensive knowledge of own subject area with extensive industrial NDT experience holding multiple NDT method Level III certification ASNT (RT,PT,UT,MT,VT,ET) /CSWIP (PAUT/TOFD)

Preferable:

Master's degree in NDT

Bachelor degree in Mechanical Engineering

Electrical Engineer Responsibilities:

*Designing, Maintaining, and Implementing Electrical instruments, facilities, Components, Equipment products, or systems for Industrial, Commercial, or Domestic purposes.

*Managing power generation, transmission and distribution

 Working with high and low voltage equipments.

*Experience with HMI, SCADA, C, JAVA, Auto Cad Electrical Design and SQL Software and system.

* Able to work with PLC, HMI, SERVO MOTORS, SERVO DREVE and VFD Programming, Operation and Servicing PCB board.

*Demonstrated skill with scripting and test automation.

*Load Calculation, High range Building wiring.

*Collaborate with engineers and technicians to design and apply new system processes.

*Work with ACB, VCB, Transformer, Star-Delta Motor Controlling, Dol-starter motor controlling.

*Overhead Crane Maintenance.

*Laboratory Equipments Maintenance(Temperature Controller and other electronics Devices) .

*Making Log Sheets of Power Consumption and Testing Electrical Load.

*Performing a wide range of engineering tasks by operating computer-assisted design.

*Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.

*Writing reports and compiling data regarding existing and potential electrical engineering projects and studies.

*Administer all Fire protection policies and fire code in an organized way.

*Participate in various special assignments in relation to fire safety.

*Evaluate performance of engineers and ensure fulfillment of fire protections needs.

*Identify dangerous and risky electrical areas depending on references and recommendations of NEPA and APL.

Electrical Engineer Qualification:

*Bachelor's degree in electrical and Electronics engineering degree from an accredited school.

*Diploma degree in electrical or Electronics department

*Licensed as a professional engineer.

*Experience in using or a desire to learn the required software.

*Knowledge of applicable codes related to electronic engineering.

S Lab is seeking a research associate to join a university-level research centre collaborating with industry. The position is for one year, renewable subject to satisfactory performance. Successful candidates will conduct research and develop advanced deep learning algorithms for multi-modality learning and 3D vision. Candidates are expected to have a strong background in relevant areas.

Key Responsibilities:

• To independently undertake research in machine learning and computer systems.
• To produce research papers and reports as required by the funding body or for dissemination to the wider academic community.
• To provide guidance and support to students associated with the project.
• To attend, contribute, and where necessary lead relevant meetings.
• To undertake any other duties relevant to the programme of research.

Job Requirements:

• Master’s degree or Bachelor’s degree of at least 2 years working experience in Computer Engineering, Computer Science, Electronics Engineering or equivalent.
• Strong background in deep learning and distributed systems. Prior experience in computer system and resource management, container techniques and deep learning environment development is preferable.
• Knowledge of scientific or engineering software like PyTorch, TensorFlow, Kubernetes, etc.
• Research experience in relevant areas would be desirable (preferably worked in R&D sector with industrial experience in the project-related field).
• Strong publication records in top-tier artificial intelligence or computer systems conferences/journals, such as NeurIPS, ICML, ICDCS, SoCC, OSDI, IPDPS and SOSP, would be preferable.
• Ability to work with limited supervision and work collaboratively in a multidisciplinary team.
• Ability and willingness to work some flexible hours.
• Good command of English, both oral and written along with the ability to communicate effectively with a wide range of individual and professional groups.

We regret that only shortlisted candidates will be notified.

Job Responsibilities:

• Carry out land and engineering surveys required for the construction projects, site boundaries or land titles.
• Survey, establish demarcations and guide for construction to proceed.
• Check and compute the pre-computation prior to any setting out for field surveyors.
• Verify accuracy of survey data, measurement, and calculations.
• Ensure correctness of build-up according to construction plans and drawing.
• To coordinate with engineering team to prepare engineering drawings and sketches.
• Design drawings including layouts, elevations and details.
• To provide drawing modifications and advice on altering design changes to suit site condition under the guidance of Engineers.

Job Requirements:

• Diploma in Land Surveying / Geomatics or its equivalent.
• Working knowledge of STAR*NET software.
• Preferably five (5) year(s) of post graduate working experience in civil and building projects.
• Good command of English and/or Mandarin.
• Proficient in AutoCAD, Revit & Civil 3D BIM application.
• Able to supervise and lead the survey team for handling all survey related issues.
• Able to provide design and shop drawings under the guidance of Engineers.
• Able to provide advices on altering design changes to suit site condition.

Job Responsibilities

• Provide general administrative support
• Data entry
• Filing and scanning of documents
• Upload documents into the system
• Other duties as assigned

Job Requirements

• Entry level candidates with no working experience are welcome to apply.
• Able to start work immediately.
• Willing to work in west area.
• Independent, ability to communicate effectively, responsible and able to work under pressure.

Summary

The incumbent is responsible for retrieve and review all customer specification documents, vendor quotes, drawings and diagrams for creating mechanical designs for customer.

Responsibilities

· Prepare and submit drawings for customer’s review and approval.

· Amend drawing & revise the drawing as per command from production manager or relevant party to meet customer’s requirements.

· Responsible for design control and drawing specification control, liaise with customer for engineering design with AutoCAD & SOLIDWORKS

· Prepare bills of quantities according to project requirement for production manager easy to refer.

· Prepare quotation to customer and follow up with customer to make sure we meet customer’s requirements.

· Perform daily review and approval of products release (QA) to check the quality of products.

· Ensure all quality management system documentation are kept in order as per our ISO standards.

· Implement quality control programs as per our ISO standards.

· Mechanical Product includes, Skid platform, Form Hose Reel, Enclosure, Panel, Bicycle Rack, Battery Rack, Construction Structure and etc.

Job Responsibilities: Management of design consultant(s) and designer team(s) engaged by the main contractor. Coordinate amongst all parties involved in the design development of a Design-Build project and to assure that the design works are executed and completed in accordance with the interfacing requirements of all disciplines and in the prescribed time frame allowing subsequent construction and operation of the proposed facilities.

Assure that the design deliverables are able to address not only the design submission and approval process but also to serve the on-going activities for procurement, supply, construction, erection, installation, testing and commissioning issues and to highlight project risks requiring design optimization and changes. Manage directly the design consultant(s) and designer team(s) for execution of geotechnical, foundation, structural, civil, building, architectural and building services design and to manage the design interfaces with other designer(s) and specialist(s), include without limitation to the mechanical, electrical, process, and instrumentation and control works.

Job Requirements:

Degree in Civil/ Structural/ Geotechnical Engineering or equivalent At least 15 years of post-graduate working experience.

Candidate with less experience will be considered as Precast Engineer Position Familiar with design code and authority regulations related to precast design. Familiar with precast element and connection design.

Job Responsibilities:

• To lead, manage and coordinate the project on its daily execution
• To check review project specifications and technical clarifications
• To prepare method statements and check drawing discrepancies
• To carry out project planning, design, project supervision and documentation
• Ensure updated drawings and shop drawings are used for construction
• To supervise and arrange inspection for construction works and coordinate with client’s representatives, consultants and subcontractors on technical matters
• To ensure smooth progress of works and timely completion adhering to the master and detailed work programmes.
• To ensure compliance to all regulations, procedures and safe work practices at site for better quality of work
• Prepare project related reports as required by the Project Manager or Construction Manager

Job Requirements:

• Candidate must possess at least Bachelor's Degree /Post Graduate Diploma in Engineering or equivalent recognized by Singapore Professional Engineers Board and BCA.
• Minimum 15 years working experience in building construction
• Knowledge on usage of Autocad & BIM
• Knowledge on structural steelworks would be an advantage
• Familiar in using Microsoft Office and Microsoft Project
• Willingness to work with tasks assigned
• Good communicative skills, able to interact with people of all levels and teamwork
• Willingness to work with tasks assigned
• Good communicative skills, able to interact with people of all levels and teamwork

Job Descriptions:-

- Coordinate with Project Personnel for Site Safety Induction prior to project commencement.

- RA / SWP and Method of Statement submission.

- Update each project on the latest MOM / WSH / NEA / SCDF requirements and legislations.

- Conduct Tool Box Meeting for all sites.

- Incident investigation and iReport submission when necessary.

- Liaise with MOM authorities.

- Monitor the upkeep of workers' dormitory.

- Upate on the validity of machines' LM certification.

- Updating and review of ISO 45001:2018 records for external auditing.

Requirements:-

* Possess recognized WSH Officer Certificate.

* Attained BCSS / Risk Management Certificate.

* Good command in both written and spoken English and Mandarin.

* Possess valid Class 3 driving license with own transport.

Assistant Production Manager

Report to: Project Manager

Min Qualifications / Experience:

Diploma/Degree holder in Mechanical Engineering with 5 years of relevant experience

Job Skills Required:

Possess broad and deep knowledge of production and project management, problem solving, interpersonal & leadership skills

Responsible for/authorised to:

a) Responsible for daily operations of project, workshop and store functions.

b) Overall planning of production resources to ensure maximum utilization of manpower, facilities and materials.

c) Monitor, plan and expedite all fabrication works to meet delivery schedule.

d) Plan and review the upgrade of machinery equipment to achieve higher productivity and efficiency.

e) Plan and maximize the working area in the workshop and open yard for fabrication work.

f) Problem solving in fabrication, maintenance and projects issues.

g) Provide guidance and assistance, where necessary to project engineers in the management of projects.

h) Participate in the evaluation of contractors and suppliers short-listed by Procurement.

i) Participate in technical and commercial discussion with client, inspectors, contractors and internal departments.

j) Ensure a clean and safe working environment and maintain discipline in the in the production workforce including contractors.

k) Any adhoc projects assigned by General Manager

project engineer

Report to: Project Manager

Min Qualifications / Experience:

Diploma/Degree in Mechanical Engineering holder with 1-2 years experience or fresh graduates

Job Skills Required:

Mechanical engineering knowledge and project management skills

Responsible for/authorised to:

a) Responsible for organizing, controlling and leading the Project team in co-ordination with inter-departments, sub-contractors, customers and third party/MOM inspectors to ensure projects are completed accordingly to production schedule, thereby meeting customer’s specifications and quality requirements while controlling the project cost within budget.

b) Detailed review of contract, customer’s technical specifications/data and related documents and executes the Project till its completion.

c) Monitor project cost variances and investigate for overruns.

d) Liases with Customer and/or 3rd party on all technical problems, clarifications and progress in relations to Projects.

e) Co-ordinate with Procurement Department and participates in purchasing committee for material and subcontracting to ensure that the purchase of material and service are within budget cost and delivery schedule.

f) Formulate plan, strategies and implement control procedures for smooth execution of project.

g) Participate in trouble-shooting of problems encountered during fabrication.

h) Analyse, review and evaluate change order for project, when situation arises.

i) Initiate kick-off meeting with workshop personnel and sub-contractor to discuss on requirement and specification of project.

j) Any adhoc projects assigned by Project Manager

Job Title: Project Admin

Salary Range: S$1800 – S2500

Report to: Project & QA/QC Manager

Min Qualifications / Experience :

1) O Level, Fresh graduate or relevant experience

Job Skills Required:

1) Knowledge in Microsoft office applications such as Excel, Word, Power Point and

related spreadsheet software.

2) Must be able to work well with others in a team setting.

3) Ability to work independently.

4) Must be able to effectively handle many concurrent projects.

Duties & Responsibilities

a. Assist Project Manager & QA/QC Manager on daily operation

b. Support HOD to establish, implement and maintain the QC system for products that need to comply with ASME codes.

c. Prepare, control and maintain the QC Manual in accordance with ASME code.

d. Assist in sourcing for materials as requested by project team

e. prepare report

f. Filing

g. Co-ordinate with various department for the job done

h. Clerical duties

i. Any adhoc work assigned by HOD

Software Engineer

TeleRadio is developer of vehicle security solution and we are looking for dynamic software engineer that has a strong will and keen challenges. This position would suit those with strong interest and ability in software architecture, algorithm design, ai implementation and have rigorous programming discipline.

Be part of our team to offer our services and support to our clients in protecting people and the infrastructure against security threats.

Roles & Responsibility:

• Analyse client software requirements and design the solution to meet their needs
• Develop and/or integrate to provide a suitable security solution
• Test solution, identify technical issues, troubleshoot the problem and provide rectification
• Configure, deploy and test solution at site
• Provide on-going support on the existing and new system
• Prepare software documentation or/and user manual

Requirements:

• Degree/Master in Computer Science, Computer Engineering or equivalent.
• Well-versed with Window Development.
• Proficient with C++, VB.net, node.js, mongodb, MS SQL, etc
• Good knowledge of GUI-level and system-level programming involving processes and threads.
• Familiar or have basic knowledge of python
• Trouble shooting at site on software and hardware integration.
• Self-motivated and able to work independently
• A good understanding of image processing and database is an advantage.
• Fresh local graduate is welcome

Responsibilies:

1. Provide Technical support and update customers on project development timely.
2. Communicate and coordinate with customers and relevant parties pertaining to technical requirements and engineering aspect of the assigned projects.
3. Plan, monitor and control all assigned projects are delivered within the given schedule.
4. Work with inter-departments to ensure commited schedules are met.
5. Assist to prepare and compile contractual quotation for existing and new products as per customers' enquires.
6. Prepare and release job orders/purchase requisition to various departments.
7. Prepare and generate shipment documents for delivery.
8. Provide regular updates on project development timely.

Requirement:

• Minimum NITEC in Mechanical Engineering or related.
• 2 years of relevant experience
• Able to interpret technical drawing and computer literate.
• Must be result oriented, resourceful and independent.

Admin Clerk Duty

1. General

Answer phone call; Document typewrite, scan, copy; Send e-mail, fax.

2. HR

2.1 iSRP (daily update)

2.2 New work permits application; work permit renewal

2.3 Worker protection goods issue and record.

2.4 work injury insurance claim

3. Purchasing

3.1 Document update & filing

3.2 Ask quotation for consumer, material.

3.3 Issue purchase order to supplier (include transportation order for delivery)

4. Accounts

4.1 Document update & filing

4.2 Prepare inventory list of material and product.

4.3 Issue project invoice.

4.4 Issue accounts statement for outstanding payment of client.

4.5 Workers salary calculation and issue .

Requirements:

Singaporen and PR only

With/ Without Work Experience

Min N Level

Job Description:

• Integrate and install auto-mechanical/ electrical/ electronic subcomponents /robot/equipment according to process instructions
• Carry out calibration/acceptance test on sub-systems/robot/vehicle/equipment according to process instructions
• Perform functional checks, setting, testing, fault finding and failure analysis
• Service and troubleshoot of Auto-mechanical / Electronics / Electrical control system

Job Requirements:

• Minimum qualification of NITEC in Mechatronics/Electronics/ Electrical/Robotics & Smart Systems or related discipline
• Candidates with 2 to 3 years’ experience in automotive or relevant industrial experience will also be considered
• Perform troubleshooting and fault analysis on Hydraulic/Pneumatic/ Electronics/ Electrical systems
• Basic understanding of electrical/electronic circuit
• Able to perform analytical and diagnostics with measuring equipment like Digital Meter & Scope
• Advantage with class 3 driving licence
• Willing to travel overseas

Dear all we looking admin for take our our office admin for electrical fields and also know the electrical knowlandge.

Rapsodo is a Sports Technology company with offices in the USA, Singapore, Turkey & Japan. We develop sports analytics products that are data-driven, portable and easy-to-use to empower athletes at all skill levels to analyse and improve their performance. From Major League Baseball star pitchers to Golf tour players, athletes use Rapsodo technology to up their game across the world. Trusted by coaches and players from youths to professionals, Rapsodo provides real-time insights for all-time performance. We are innovative, focused, and rapidly growing. We are continuously looking for team players who will stop at nothing to deliver state-of-the-art solutions as part of Team Rapsodo.

As a Mechanical Engineering Intern, you will be: 

• Working in a small design/engineering team on a range of sports products 
• Assisting in all stages of product research, design and development 
• Witnessing products evolve from sketch to mass production  
• Getting hands on with iterative prototyping and testing 
• Developing technical and software skills 

• Demonstrate strong technical skills: CAD - Solidworks preferred, Autodesk/ Rhino is also acceptable 
• Fearless, inquisitive nature and the ability to discuss and develop ideas and concepts 
• Unafraid to ask questions, raise concerns, disagree with the majority, and offer an opinion 
• A desire to be challenged and to learn new skills 
• A hands on and immersive approach to product development 
• A stickler for details  
• For interested candidates, kindly submit your resume and samples of any past work, if applicable.  

Purpose of Role:

Provide administrative and operational support for company transport, dormitories and admin related matters.

Responsibilities:

Manage company's bus transport system for both permanent employees and foreign workers

• Manage number of buses for ferry service of foreign workers
• Handling of daily feedback on bus transport matters
• Management of ad-hoc bus requests

Taxi Services and Claims

• Management of taxi vouchers
• Management of monthly taxi billing and claims
• Follow up on resolving of unverified taxi claims

Telco Lines Requirements and Billings

• Management of Telephone line
• Telephone-local calls (Extention)
• Handphones / SIMs card
• Fax expenses
• Switchboard call-(Local) & -(Overseas)
• Postage & Couriers

Manage company's dormitories, housing of foreign workers, oversee foreign workers well-being and other related matters with dormitories

• Management of Dormitory status
• Updating workers movement status
• Follow up on Maintenance and Repairs status for dormitories
• Carry out House Keeping inspections
• Carry out fact findings and follow ups on workers offences at dormitories

Admin Matters

• Payment of newspapers subscriptions
• Assist in organizing of Ceremonies and Events
• SAP administrative matter on SE / SA & Kofax request
• Follow up on resolving any issues pertaining to HR / Admin matters

Requirements:

• NTC or Diploma in any field of studies
• Proficient in MS Word and Excel
• Knowledge of SAP will be advantageous, but not a must
• Comfortable entering into dormitories to liaise and interact with workers on resolving workers related issues
• Able to work independently to find out information in order to resolve work and admin issues
• Able to interact and liaise with both internal and external stakeholders, including senior management staffs and external contractors
• Possess patience to find out about internal organizational workings, work cultures and their effects on different departments and processes
• Able to anticipate or foresee impact of decisions/information from authorities or company management on own area of responsibilities, with ability to recognize linkage and synergies between departments and stakeholders (internal and external)
• Able to climb up levels of staircases in office buildings, yards and dormitories
• Able to respond to emergency calls outside office hours

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

Need full time engineer or project manager for steel and wet trade works

Need full time diploma or degree for construction or civil enginnering

Need 1-2 year realated working experience / subcontractor / Main contractor both can

also welcome new fresh engineer who is graducate from singapore government poly or universities

Need admin assistance or account assistance to help settle company paper work and keep and record invoice ！

Need PR / Malaysian （can apply SP/WP）.

Need acknowlage at the basic skill such as Word and excel ,PDF etc...

Can speak Mandrain and English both well .

Better have about experience of adminative or accounting working in Contruction company !

Better to know how to apply the work permit online （also can teach）

• Report and assist Project Manager (PM) on project functions, included but not limited to project management, site management, material control, equipment deployment, manpower deployment, transportation / logistics matter, etc to meet the projects goals
• Monitor project progress schedule
• Coordinating with customers and contractors
• Conduct technical reviews to ensure compliance with Contract terms and target completion date
• Attend site meetings with customers and contractors
• Monitor site safety matters to ensure EHS practices are carried out at all times
• Any other adhoc duties as assigned

Requirements

• Master or Degree in Civil Engineering or equivalent
• Minimum 5years of experience in Construction Industry. ERSS experience is favorable.
• Proficient in Microsoft Office and AutoCAD

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructures, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance. We specialise in the design and build of security operations centres for cybersecurity professionals and provide managed security services to strengthen the cybersecurity posture of our government and enterprise customers.

Responsibilities:

• Contributing to the development of marketing plans and strategies.
• Coordinating and working on marketing campaigns across various channels.
• Digital Performance: Track and optimize the performance of digital campaigns.
• Analysing market trends and competitors to identify opportunities.
• Creating compelling content for marketing materials and digital platforms.
• Focus on content Marketing to write long-form articles to profile subject matter experts/capabilities optimized for SEO and our target keywords.
• Develop sales enablement. (Elevated presentation, brochures, and social posts that support the process of selling)
• Collaborating with creative teams and external agencies.
• Assisting in organising events and promotions to boost brand awareness.
• Monitoring and reporting on the effectiveness of marketing initiatives.
• Generate event reports for after-action review.
• Analysis/ROI is achieved by presenting data to the Group Marketing Manager and tracking the marketing spending.
• Align with the marketing communications team to synchronise corporate branding, messaging, and the company’s strategic directions.

Requirements:

• Preferably possess Digital Marketing experience.
• Administration or sales and marketing assistant experience.
• Effective written and verbal communication skills.
• A high level of attention to detail.
• Ability to work under pressure.
• Ability to work effectively within a team and independently.
• Competency in Microsoft applications, including Word, Excel, and Outlook.
• Good organization skills.

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

Responsibilities :-

• Oversee the overall execution & construction of the ERSS competently &
• Professionally & conversant in the statutory requirements of Building Control Act.
• Co-ordinate and monitor projects
• Ad-hoc duties as assigned by the Superior
• Resolve problems arising at sites and attend site meetings
• Respond to all email correspondence and claim submission within timelines

Requirements :-

• Possess basic Degree in Civil Engineering (with recognized institutions) &
• Construction Safety Course.
• Minimum 5 years in Project Management experience is desired.
• Good command in both written & spoken in English.
• Self-motivated and committed to works.
• 5.5 days week.
• Possess valid Class 3 driving license & own transport is preferred.

· Prepares and submit shop drawings / As Built Drawings.

· Attend all coordination meeting regards to technical issues.

· To support Marketing, QS / Project Departments in technical enquiries.

· Able to manage the process from sample submission, production such as cutting list or fabrication drawings etc.

· Able to manage & liaise with sub-contractors, Main-contractors and client’s engineers.

· Project filing or drawings in Soft Copy and Hard Copy is required

· Create any freehand drawings / sketches to initiate preliminary drawings, including of cutting list

· Studies and examines drawings and specification of tender requirement.

· To attend on going site meeting and liaise with contractors, suppliers and clients to meet the requirements of the ongoing tender/project works

· To oversee the design department and give support to junior drafter

· Any other tasks assigned by superior