• Reports to Senior Design Manager & Geotechnical Manager
• Review the monitoring report (Daily, Weekly, Monthly)
• Interpret and prepare interpretative reports for instrumentation (settlement, marker vibrometer), etc.
• Participate in Monitoring meetings with LTA and coordination between the construction team and LTA
• Attend to LTA queries about monitoring and instrumentation matters
• Other works related to monitoring

Job requirements:

• A degree in Civil Engineering/Geotechnical Engineering or equivalent
• At least 5 years of working experience in Civil projects for a similar position (infrastructure/ road/ bridge) is required for this position
• Experience in Instrument Installation, Recordings, Interpretation
• Experience in various software used in Instrumentation Monitoring
• Candidates with experience in LTA projects are preferred
• Project: Viaducts
• Location: Woodlands

Duties and Responsibilities

●Implements and monitors appropriate safety measurements in accordance with the Workplace.

●Enforces all safety requirements and in-house safety rules and regulations.

●Conducts regular site checks and takes appropriate corrective actions.

●Compiles all relevant reports and records and carry out daily safety inspection.

● Carry out training to all workers, staff and site personnel on EHS.

●Continuous improvement on the EHS system through the effective implementation of ISO 14001 and OSHAS 18001 management standards.

●Conduct regular safety inspections to ensure all site activities are carried out in accordance to MOM safety requirements and all workers comply with safety regulations.

●Establish a report for all Inspections and Audits including Corrective & Preventive Actions.

●Evaluates risks associated with the ECO hazards identified in the workplace and reports progress of corrective and preventive actions undertaken within Coordinate and correspond with external agencies, MOM, SCDF, etc. on ECO related issues/matter.

Requirements

· Minimum 3 years experience with relevant working experience.

· Registered with MOM as WSHO and ECO.

· Attended Risk Management Training Course

· Experience in local construction projects preferred

· Good communication & interpersonal skills.

• Responsible for all basic cleaning in and around the office building premises
• Dusting and cleaning of cupboards and workstations
• Clean workspaces, common areas, offices, hallways, and bathrooms
• Sweeping, vacuuming, and mopping of floor
• Empty trash bins
• Wash and maintain the cleanliness of bathrooms and toilets.
• Water the plants
• Any other duties as assigned
• 工作区域和物品的清洁、擦拭和清洗以及消毒。
• 清洗和保持浴室和厕所的清洁。
• 各种类型的吸尘、扫地和拖地。
• 清空垃圾桶

Responsibilities

As an Engineering & Business Development Intern, you will be responsible for designing and presenting customised engineering systems to the company’s prospective clients and ensuring deliverables of the system. You will be contributing to the Engineering team in the following key areas:

Engineering:

• Understand the process of microtunneling and pipe jacking, and its supporting equipment supply scope, such as the automatic bentonite lubrication system, slurry management system, gyro navigation and more.

• Understand customers’ project requirements and assist in designing and proposing suitable systems/solutions.

• Support the engineering team in providing technical information to potential clients.

• Support the engineering team in ensuring all deliverables of the system are achieved during and after setup.

Business Development:

• Source new products that will help to enhance our product offerings and value-add (e.g. chemicals, new equipment or parts for relevant industries).

• Research on relevant engineering systems/solutions across the world and present applicable solutions for construction projects in Singapore and Southeast Asia.

Learning Outcomes and Objectives

• You will have the opportunity to learn and grow with an established SME with over 30 years of track record in microtunneling and a growing supply scope.

• You will enjoy the flexibility of working in a close-knit team of entrepreneurial individuals where everyone is empowered to share, implement and see the fruition of our ideas.

• Apart from applying engineering concepts in real life, you will also get practical hands-on experience in designing and engineering a system that will be put to good use.

• More importantly, with Business Development as part of the internship, you will also get to hone your leadership, communication and negotiation skills – which are essential skillsets for navigating today’s business world.

• Last but not least, we are looking for a self-motivated and entrepreneurial individual who is keen to learn and grow with an SME. Full-time position may be offered at the end of the internship.

Skills & Qualifications

• Students currently pursuing a Degree in Engineering (or related studies).

• Excellent command of written and spoken English and Mandarin.

• Resourceful, analytical and creative in problem solving.

• Strong engineering and technical knowledge.

• Team player with good leadership and organisational skills.

• Good interpersonal and communication skills.

• Able to handle outdoor environment.

• Class 3 driving licence will be useful.

Job description:

· To plan and manage construction projects.

· Responsible for all assigned client servicing matters and organising and preparing new business development pitches.

· Work professionally with all internal leads to create, plan, and deliver strategic communications strategies for our clients

· Prepare project quotations and follow up approvals to Invoicing.

· Follow up with monthly financial receivables and track clients' budget statements with updated reports.

· To plan and research to write creative job briefs, follow up with meeting minutes and liaise daily for ongoing jobs internally.

Job Requirements

• Selection criteria are strictly for candidates with at least three to four years of experience in constructioin project management.
• Possess knowledge and experience in FMCS, BMS, Electrical scope
• Willing to put in extra effort to solve various issues on site and/ or client matter.
• Willing to rotate shift work.

Key Responsibilities:

• Plan and supervise Construction and maintenance activities to ensure inspection programmes and preventive maintenance works are carried out as planned and in accordance with standards expected.
• Follow up promptly on corrective maintenance works to minimize downtime and maintain a safe environment.
• Manage and supervise planned and corrective maintenance programmes for electronic directory boards and speed advisory signs to ensure systems are in good working condition.
• Manage and supervise planned slope inspection programmes and analyze service report to pick up potential slope failure tell-tale sign and take quick remedial actions to mitigate.
• Manage user’s request, understand the requirements, develop work proposals and estimate associated costs. Oversee procurement of services, supervise work progress and ensure materials and workmanship meet standards. Review and track site progress through meetings and inspections to meet user’s project completion timeline.
• Identify improvement works, maintenance needs and cyclical maintenance programmes and derive budget required for new Financial Year.
• Oversee other tasks assigned

Requirements:

• Good knowledge in design, construction and maintenance
• Self-motivated, positive working attitude and customer-oriented
• Good oral and written communication and interpersonal skills
• Ability to work with different levels of people
• Willing to work night shift

Job Description

• Manage employee onboarding and offboarding processes, including preparing employment contracts, conducting orientation sessions, and coordinating exit interviews.
• Manage day-to-day HR activities, including maintaining employee records
• Address employee inquiries related to HR policies, benefits, and other HR-related matters.
• Oversee work pass matters of foreign workers.
• Monitoring personal files and HRIS records are updated timely and accurately.
• Administer Leave, deductions & claims for workers.
• Apply and coordinate training programs.
• Perform monthly payroll.
• Any other ad-hoc tasks assigned.

Requirements

• Min Degree/Diploma in Human Resource, Business Administration, or other related courses of studies or equivalent.
• At least 3 years of similar HR experience in a fast-paced environment.
• Detail-oriented, organized, and able to handle multiple tasks effectively.
• Proficient in HRIS system, Microsoft Word, Microsoft Excel, and MS PowerPoint.
• Proficient in the English language, both verbal and written.

Job Description

• Update the records to process account payable and petty cash.
• Review AP aging, report of exception matter (if any).
• Reconcile vendors’ SOA to our accounting record (at least for major suppliers.
• Update records of account receivables.
• Prepare general ledger in time for audit schedule assigned.
• Small entities monthly and yearly closing.
• Handling the full set of accounts for small entities.
• Assist in preparation for GST return, corporate income tax return, ECI.
• Assist in quarterly or half yearly and financial year end stock take conducted by finance dept.
• Assist to prepare stock take variance report for superior to review.

Requirement

• At least 3 years of relevant experience of related field.

-Clerical duties and general administrative support.

- Prepare monthly payroll for workers.

- Apply and renew work passes for company and workers.

- Possess knowledge of MOM laws and regulations.

- Process reimbursement of staff expenses.

-To perform the administrative duties such as data entry, scanning, filing, etc.

-Attend to phone calls, queries and emails.

-Co-ordinating and managing appointments and work schedule.

Job Responsibilities:

• Manage and monitor the project from project kick-off until machine is delivered to customer for production use.

Job Responsibilities:

• Responsible for Project planning, design & implementation, management and coordination, and client management.
• Communicate with customers effectively to understand their needs and provide propositions to achieve objectives.
• Responsible for meeting all projects’ objectives including meeting specifications, timeline and budget.
• Involve in all phases of projects from conceptualization to commissioning.
• Responsible for monitoring progress of all projects that are assigned to the team till completion.
• Manage customers’ expectations or changes to requirements and propose solutions and costs when necessary.
• Provide technical advices, communicate and coordinate with department heads on project related information and planning for effective resource allocation.
• Lead and manage a team of assigned consultants or contractors allocated to the project.

Job Requirements:

• Diploma / Degree in Mechanical Engineering
• Experience in Mechanical design knowledge at machine level.
• Proficient in MS Word, Excel & Project Management Software is essential.
• Experience in machine assembly, integration, testing and buyoff processes of Automation Machine
• At least 3 years of relevant working experience as a Project Engineer
• Candidates should be able to travel and/or be stationed overseas depending on projects requirements.
• Team player who can work well in cross-functional teams to achieve project objectives.
• Strong project management, planning and coordination skills.

Summary of the Job:

· Responsible for mechanical design tasks of given project and ensure delivery of the machine according to customer requirements.

Job Description:

· Prepare design concept according to customer requirement & compiling quotation from new/existing supplier at RFQ stage.

· Lead the qualification of new part from new supplier with Project buyer. Work with Quality Assurance to qualify the new supplier when required.

· Execute design according to customer requirements and to finish the jobs within given schedule and budget.

· Review and confirm technical specification with customer.

· Develop detail & assembly drawing according to Sys-Mac drafting standard.

· Designer to draw schematic diagrams for Assembly.

· Loading drawings and the files into in-house manufacturing share drive for their retrieval.

· Print drawings to verify the correctness before handling to Admin Assistant to route to in-house manufacturing to produce the parts.

· Prepare Bill of Material (BOM).

· Request PDA from planner and prepare Material Requirement List (MRL) of the project and release to Planner/Project Engineer.

· Liaise with respective Control Engineer for the requirements of electrical circuit and software development of the project.

· Liaise with the Project Engineer and assist on execution of assembly and buyoff of the project as and when necessary.

· Initiate Change Notice Request (NCR) for change of part design.

· Report progress and project related issues to the Sr. Design Engineer.

· Prepare of Machine Operation Manual & Maintenance (Mechanical) for the project.

· Maintain proper project documentation.

· Other duties as and when assigned.

Job Requirements:

· Degree/Diploma in Mechanical Engineering or equivalent.

· Min. 4 years relevant experience in Automation machine design.

· Ability to create and interpret mechanical drawings, carry out design calculations and component detailed drawings.

· Able to perform assigned tasks independently or through team activities.

· Self-motivated, highly resourceful and organized.

· Knowledge of SolidWorks 3D CAD software.

· Good team player.

Job Title: Engineering Assistant (Production)
Location: Tampines

Working Days: 4-3-3-4 Shift Pattern
Working Hours : 8am to 8pm or 8pm to 8am
Basic Salary: Up to $3500
Benefits: AWS, Quarterly Bonus, Annual Leave, Shift Allowance,Company transport

Job Responsibilities:

• Closely monitor SPC parameters and control charts.
• Take actions to improve tool capability performance
• Investigate quality issues and perform 1st level troubleshooting
• Escalate unresolved issues to Supervisor and Technology Engineers
• Control the dispatching of product to tool
• Advise which product can be run on which tool.
• Control high risk materials (Sawmarks, chips, MRB lots, etc.) to run on restricted tools.
• Escalate problematic tools to Technology for resolution

Requirements:

• Diploma in any Technical discipline preferably with minimum 1 year of working experience
• Those without Diploma but with at least 5 years of hands-on working experience will also be considered.
• Good written and verbal communication skills.
• Must be willing to work 12-hours shift schedule either permanent or rotating.
• Able to do 12 hours permanent or rotating shift.

WONG MENG KANG

Superform Consulting Pte Ltd

R1988500 / 15C7536

Job Description & Requirements

We are looking for a Driver to transport our workers and materials in a comfortable, safe and timely manner.

Driver responsibilities include arranging regular cleaning and maintenance services for the vehicle, planning each route based on road and traffic conditions and managing payments.

To be considered for this role, you should have a valid driver’s license and a clean driving record with no traffic violations.

Driver responsibilities include:

• Transport contrsuction materials in a safe and efficient matters to destinations around singapore
• Maintaining the vehicle safe and clean
• Using navigation apps to determine the best route

Responsibilities

• Map out driving routes ahead of time to determine the most expedient trip
• Collect payments and issue receipts
• Listen to traffic and weather reports to stay up-to-date on road conditions
• Adjust the route to avoid heavy traffic or road constructions, as needed
• 
  

Requirements and skills

• Proven experience as a Driver
• A valid driver’s license
• Class 4 driving license
• A clean driving record
• Familiarity with GPS devices
• Knowledge of area roads and neighborhoods
• Availability to occasionally take weekend and night shifts
• Ability to remain calm in stressful driving situations (e.g. at rush hour)

Job Responsibilities:

• Coordinate and Monitor progress, quality of worksmanship and compliance with contract requirements.
• Ensure proper housekeeping and safety provision at site working area for workers to carry out tasks.
• Assist in manpower and resource scheduling and deployment, daily man-hours returns and coordinate in all aspects of site issues.
• Co-ordinate and monitor the availability and on time delivery of materials / equipment to complete the construction work within schedule.
• Supervision of work and ensure work done in accordance with specification and quality requirements.
• Full-Time position

Job Requirement:

• Preferred relevant working experience in Singapore (others relevant experience can be discussed )
• 2-5 years of working experience in related works
• Experience with Project Management, Safety and Health Management, and Risk Management Manager is added advantage
• Abe to work independently, and manage a team of workers.
• Must be hands-on, daily inspect the site works, and ensure projects completion on time
• Class 3 driving license preferred
• Good project management skills, excellent communication and coordination skills and great conceptualization and presentation skills will be helpful though not necessary.

Job Description & Requirements

Handle employees’ training arrangement like monitoring and applying coretrade, Enhanced SOC and other courses/licences

Application/renewal/cancellation/replacement of Work Passes

Perform administrative tasks e.g., insurance renewal, dormitory

Handle foreign workers related matters such as Security Bond, OFWAS, PCP, booking of air ticket etc

Administer vehicles insurance and roadtax renewals

Maintain proper filing system, documentation & database

General office administration and management (eg. requisitions of office/pantry supplies)

Assist Accounts for staff payslips, reimbursement, payment processing and receiving

Assist Directors with travel arrangement and booking reservations

Assist in other ad-hoc duties as assigned by the immediate superior or HOD

ROLES & RESPONSIBILITIES:

VA Engineering Pte Ltd is a value-added provider of Architectural and Environmental acoustical solutions, serving the needs and demands of various sectors, such as Government, Industrial, Commercial and Residential sectors.

Alpha Acoustics is an established Singapore firm with the niche expertise in design and specialist installation of acoustical materials and a wide range of acoustical and audio-visual consulting services for the past 20+ years.

We provide on job training, fast career development path and good remuneration package.

Requirement:

Languages Known Primary: English & Tami

- Responsible for scheduling

- co-ordinating and supervising the work of all site operatives

- ensuring that all work is delivered safely on time and within budget

- Along with managing equipment and materials required

- Supervise the use of machinery and equipment

- Supervise and train workers and tradespeople

Job Description:

· Prepare design concept according to customer requirement & compiling quotation from new/existing supplier at RFQ stage.

· Lead the qualification of new part from new supplier with Project buyer. Work with Quality Assurance to qualify the new supplier when required.

· Execute design according to customer requirements and to finish the jobs within given schedule and budget.

· Review and confirm technical specification with customer.

· Develop detail & assembly drawing according to Sys-Mac drafting standard.

· Designer to draw schematic diagrams for Assembly.

· Loading drawings and the files into in-house manufacturing share drive for their retrieval.

· Print drawings to verify the correctness before handling to Admin Assistant to route to in-house manufacturing to produce the parts.

· Prepare Bill of Material (BOM).

· Request PDA from planner and prepare Material Requirement List (MRL) of the project and release to Planner/Project Engineer.

· Liaise with respective Control Engineer for the requirements of electrical circuit and software development of the project.

· Liaise with the Project Engineer and assist on execution of assembly and buyoff of the project as and when necessary.

· Initiate Change Notice Request (NCR) for change of part design.

· Report progress and project related issues to the Sr. Design Engineer.

· Prepare of Machine Operation Manual & Maintenance (Mechanical) for the project.

· Maintain proper project documentation.

· Other duties as and when assigned.

Job Requirements:

· Degree/Diploma in Mechanical Engineering or equivalent.

· Min. 4 years relevant experience in Automation machine design.

· Ability to create and interpret mechanical drawings, carry out design calculations and component detailed drawings.

· Able to perform assigned tasks independently or through team activities.

· Self-motivated, highly resourceful and organized.

· Knowledge of SolidWorks 3D CAD software.

· Good team player.

Summary of the Job: (Primary function of the job)

· Produce complete control solution and software design base on customer specification and Sys-Mac standardized practice

· PLC based software control design & HMI software design

· Integration of third-party equipment’s and components into software design

Example data communication, barcode scanner, motion control, Robot Controllers, vision system and signal conditional

Job Description:

· Developing and troubleshooting PLC & HMI/ SCADA program

· Developing and integration with MES or Database systems.

· Troubleshooting communications with MES or database.

· Troubleshooting electrical components & system control

· Prepare Machine I/O, flow chart, interface time chart, data allocation list, setup procedure and software code

· Documentation of machine operation manual for the project

· Liaise with the Customer, Design and Project Engineer for the software development and execution of the project

· Execute Engineering Change Notice (ECN) for change of software

· Maintain proper project documentation

· Provide training to End users and technicians.

· Adhere to all health and safety rules and procedures

Job Requirements:

· Min. Bachelor’s degree in Electrical Engineering/ Electronics/ Automation Control or equivalent

· Min. 5 years relevant experience in Automation project

· Experience in PLC programming & SCADA design is a must

· Knowledge of Mitsubishi, Allen-Bradley, SCADA (WinCC, Ignition)

· Knowledge of C++, C#, .NET is an added advantage

· Knowledge of robot programming is an added advantage

· Able to perform assigned task independently or through team activities

· Self- motivated, resourceful and organized

· Willing to travel overseas for assignments at short notice

· Good interpersonal communication skills

Summary of the Job: (Primary function of the job)

· Produce complete control solution and Electrical design base on customer specification and
Sys-Mac standardized practice

· Integrate and interface of third-party equipment’s into electrical design.

Example barcode scanner, Robot controllers, motion controller, vision system etc

Job Responsibilities: (Key responsibilities of the job)

· Execute of circuit design according to international electrical standard

· Prepare circuit diagram for wiring execution

· Prepare Bill of Material (BOM), I/O List

· Initiate Purchase Request (PR) on order of electrical components to be used for the project

· Liaise with the Supplier, Customer, Design and Project Engineer for the electrical design and wiring execution of the project.

· Provide thorough testing of machine functionality to verify electrical wiring and safety completeness.

· Work with other members of the control department to continuously improve method of integrated control technology

· Prepare of Machine Operation Manual for the project.

· Execute Engineering Change Notice (ECN) for change of electrical design

· Maintain proper project documentation.

· Adhere to all health and safety rules and procedures

· Support in FAT / SAT tasks

Job Requirements

· Min Diploma in Electrical Engineering/Electronics/Automation Control or equivalent

· Min 3 years relevant experience in Automation project.

· Ability to design electrical circuit, perform electrical calculation

· Knowledge of Solidwork CAD will be an added advantage

· Experience in hand on wiring skill on panel or machine

· Knowledge of AutoCAD software will be an added advantage

· Able to perform assigned tasks independently or through team activities

· Self-motivated, highly resourceful and organized.

· Willing to travel overseas for assignments at short notice.

· Good interpersonal communication skills.

About GlobalFoundries

GlobalFoundries is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world’s most inspired technology companies. With a global manufacturing footprint spanning three continents, GlobalFoundries makes possible the technologies and systems that transform industries and give customers the power to shape their markets. For more information, visit www.gf.com.

What You Will Do

• Support production line, SPC/FDC (statistical process control / fault detection classification) monitoring, perform process window study and provide improvement plan to improve process stability and performance.

• Lead Process CIP (continuous improvement projects) in Dept. to improve process robustness, cost and tool capacity thru –

• Develop and characterize new process recipes for new/existing technologies and NPI (New Product Introduction), meeting qualification and reliability requirements

• Improve process performance indices adopting big data analytic, statistical analysis and structured problem-solving methodologies

• Collaborate/work with cross functional teams, cross fabs and OEM suppliers for BKM (best known method) convergence on recipes, material, method, and I4.0 automation, and resolving complex integration issue

• Drive company's production ramp schedule by process qualification, productivity improvement and new tool release.

• Train, coach, and guide Engineers to support daily operational requirements and impart process knowledge, troubleshooting skills, risk assessment and decision making.

• Opportunities for job rotation and overseas assignment.

• Opportunities to file patents, author technical papers for publication and present at local or overseas seminars.

What You Will Need

• MS/BS in Chemical Engineering, Electrical/Electronic Engineering, Mechanical Engineering, Materials Science Engineering, Chemistry & Physics with minimum 3 years of relevant experience.

• Diploma candidates with minimum 5 years of work experience in similar role.

• Demonstrated ability in structured problem solving and root cause analysis with solution development.

• Strong knowledge in SPC (Statistical Process Control), risk assessment, DOE (Design of Experiment) and 8D approaches.

• Experience in big data analysis and use of AI/ML, coding like python.

• Strong technical depth and having patents and papers publication is a plus.

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations. 

To ensure that we maintain a safe and healthy workplace for our GlobalFoundries employees, please note that offered candidates who have applied for jobs in Singapore will have to be fully vaccinated prior to their targeted start date. For new hires, the appointment is contingent upon the provision of a copy of their COVID-19 vaccination document, subject to any written request for medical or religious accommodation. 

Roles & Responsibilities

· Assist Project Manager in managing and monitoring day-to-day projects operation

· Ensure proper taking over of in-coming projects from sales department

· Proper preparation (Cost Sheets, Cost-estimates etc) and documentation of individual project upon received work orders

· Manage multiple projects independently and to be familiar with system integration works

· Liaise with Clients, Contractors and Consultants from design stage, project execution to project handing over

· Attend to all project related queries and to check drawings to resolve discrepancies during design stage

· Responsible for stakeholder’s management which includes attending meetings, coordination discussion, shop drawing preparation, documentation submission and supervision works.

· Ensure proper planning & control of all project/order assigned with approved project schedule updated with events changes

· Preparation of Progressive Claim and other claim related documents to ensure smooth payment transaction between company and all other clients

· To coordinate and establish good relationship with all current and future suppliers for smooth project execution

· Other ad-hoc duties as assigned

Requirements

· Diploma and/or Degree in Mechanical Engineering or other Engineering discipline, project management, or equivalent

· Minimum 2 years and above Working in Singapore

· Local Graduate is welcomed.

· Good verbal and written communication skills

· Demonstrates good teamwork and resource management

· Knowledge in Waste Management and Pneumatic Waste Conveyance System will be an added advantage

Summary of the Job: (Primary function of the job)

• Supporting role in Logistics Inbound & Outbound activities

Job Responsibilities: (Key responsibilities of the job)

• Ensure receiving items are correct and complete with the accompanying documents and strictly following the documented Work Instruction and Procedures

• Notify Logistics for any discrepancy for receiving & outbound items

• Notify Logistics for any discrepancy for receiving & outbound items

• Direct receipt & support Direct Raw Material shipment to Batam and fowarder (C&G)

• Label goods received with accouracy and ensure proper storage of goods as required.

• Material kitting for outbound transaction & material movement to production shopfloors

• Ensure that the storage area and the goods are properly maintained.

• Escalate to Supervisor/ Manager if found concern on safety issues or potential breakform in warehouse process gaps that may lead to inventory inaccuracy, quality of the materials and delivery during receiving and materials issuing

• Packing & Palletizing and related logistics assistic for movement of stocks/ products.

• Other duties as and when assigned

Job Requirements:

Other duties as and when assigned

Min 2 years relevant working experience in logistics related environment.

Computer literate

Applicants from manufacturing/engineering environment preferred

Good understanding in Electronic Resource Planning (ERP) and Supply Chain Management would be an added advantage

1) Plan machining by studying engineering drawings with understanding of General Dimensions / Tolerances.

2) Programming by entering instructions, including zero and reference points; setting tools and parameters.

3) Handle all CNC machine related mechanism

4) Verify settings with measurable and First-Off parts against drawings

5) Ensure safe operations and handling at all times

6) Practice preventive maintenance on machines

• Reports to the Safety Manager
• Liaise closely with authorities
• Familiar with local law and regulations
• Take charge and handle public feedback
• In charge of all environmental control programs and lead the environmental team
• Maintain proper documentation i.e. Site environmental Report, daily environmental inspection report etc.
• Conducting environmental workshops and training for the project
• In charge of pre-project planning and advice on the measures to take in areas on noise/water/air pollution control, waste/pest infestation control, and public/neighbors’ engagement and management

Job Requirements:

• A Registered ECO with NEA
• A Registered ECMO with IES
• Attained Specialist Diploma in WSH or equivalent
• Minimum 3 years’ post-registration experience as ECO for LTA projects
• Experience in civil works (road and viaduct) & ASAC awards preferred
• Proficient in GGBS requirements/implementation and ISO14001:2015 standards
• Proficient with MS Office
• Location: Woodlands
• Project: Infrastructure, Viaducts

1. Plan machining by studying engineering drawings with

understanding of General Dimensions / Tolerances.

2. Programming by entering instructions, including zero and

reference points; setting tools and parameters.

3. Handle all CNC machine related mechanism

4. Verify settings with measurable and First-Off parts against

drawings

5. Ensure safe operations and handling at all times
6. Practice preventive maintenance on machines