Job Description:

- Assist the Program Manager in the design and development of Rocket Motors.

- Responsible for the design of all assembly and testing fixtures.

- Assist the Team in all Firing Trials and will also be responsible for data collection and analysis.

- Involved in Modeling and Simulation including FEA.

Job Requirements

- Degree in Mechanical Engineering

- Able to work as a team and enjoys outdoor activities,

- Excellent communication and presentation skills

- Able to contribute ideas and solutions.

Job Description:

- Perform Maintenance, Repair & Overhaul services

- Perform troubleshoot

- Provide update for vehicles, resources and material status

- Provide instant maintenance support and advises to on-site customers

- Communicate Customers’ feedback and requirement for timely response.

- Ensure appropriate knowledge transfer to relevant technician.

Job Requirements:

- Diploma in engineering fields

- Able to lead a team

- Able to work in MRO environment

Responsibilities

• Utilize Autocad and Sketchup to create floor plans, detailed drawings, and 3D renderings

• Office administration work

• Perform any other ad-hoc duties by the Manager/Management.

Requirement

• Minimum diploma in Design or equivalent.

• Good communication skills, meticulous, able to multi-task and work in a team or independently.

• Proficient in AutoCAD, Sketchup, and Microsoft Office.

Singaporean or PR based in Singapore only.

Salary will commensurate according to experience & qualifications.

We regret that only shortlisted candidates will be contacted.

Job Description:

- Lead a team of minimum 10 personnel

- Provide instant maintenance support and advises to on-site customers

- Capture failures trends and analysis, providing immediate maintenance solutions where possible

- Gather of lessons learnt, improvement and feedback from customer and attend to customer’s reported in-service Feedbacks (incidents)

- Make Post Design Services suggestions to management on any Potential Design & Reliability issues

- Advise customer to adopt the correct maintenance procedures

- Provide an immediate update and information on critical and catastrophic failures

- Create Management awareness with precise failures defects analysis. Immediate remedial actions and improvement and conduct Investigations on customers’ feedbacks to provide solutions.

- Ensure appropriate knowledge transfer to relevant technician.

- Communicate Customers’ feedback and requirement for timely response.

- Any other tasks been assigned

Job Requirements:

- Degree in Mechanical, Electrical or Electronic Engineering with minimum 5 years of experience in Automotive MRO industry is preferred

- Proficient in reading schematics and part drawing

Walk-In Interview (Immediate hiring)

- Live in West Area

- Fetch workers to/fro to work at railway depots/stations

- Only 4-5 hours of driving per night BUT paid 8 hours of work per night

- Have a valid Class 3 driving licence with proven clean records

- Have hands on experience driving a 14 footer lorry with canopy

- Full time: 5-6 nights per week (alt Sat & Sun off)

- Part time: min. 3 nights per week (negotiable on the nights preferred)

- Monthly paid with CPF contributions

Job Description:

- Setting up, maintaining and regular lubrication of machines.

- Run production to produce required output.

- Carry out effective in – process inspection

- Carry out adjustment of tooling and change of worn out tooling.

- Trouble shooting of production problem.

- Daily housekeeping.

- Training of operators & new staff

Job Requirements:

- Nitec in mechanical or electrical background preferred

- Able to comply to safety procedures.

-Must be able to lift heavy objects

- Able to commit to work shift work

Responsibilities:

• Supervise and lead a team for maintenance and overhauling jobs, including mechanical, diesel and air-conditioning onboard vessels or in workshop
• Inspect pre-service, disassembly, assembly and pre-delivery of all mechanical equipment.
• Plan and coordinate with customers and suppliers on works to be carried out
• Prepare, coordinate and monitor work schedule
• Manage daily manpower deployment
• Perform site inspection and work discussion
• Assess and ensure safety requirements and permits are strictly followed
• Provide logistic support e.g indent of spares and follow up

Requirements:

• Diploma in Mechanical or Marine Engineering
• Able to deal and communicate with stakeholders effectively at all levels
• Possess man-management experience to supervise and deploy workers
• Possess high level of initiative
• Able to work under pressure
• Proficient in MS Office
• Willing to work in Changi area

Other Information:

• Location: Changi
• Transport provided at or nearby: Jalan Bahar, Pioneer MRT, Boon Lay MRT, Lakeside MRT, Jurong West & East, Jalan Bukit Merah, Choa Chu Kang MRT, Bukit Panjang Plaza, Woodlands, Sembawang MRT, Yishun MRT, Bishan MRT, Ang Mo Kio MRT, Hougang Ave 8, Sengkang Square, Punggol Central, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5 days work week
• Working Hours: 7.45am-5pm

Job Description:

- Raise Purchase Requisitions for direct materials for production

- Monitor Purchse Order and the timely deliveries of raw materials and components to meet production plan

- Monitor production output for production.

- Create lot allocation for production

- Create and maintain production orders for production tracking to meet delivery

- Maintain traceability record

- Track material usage and allocation

- Perform Cycle count, create packing list and filing

- Printing of Route Card and Job card

- General Ad-Hoc task assigned by the Supervisor.

Job Requirements:

- Diploma / Degree in related fields

- Proficient in Microsoft Office (Words / Excel)

- Knowledge in SAP is preferred

- Possess good communication, interpersonal, and organizational skills

- Good team player

Job Description:

- Process support on the improvement, upgrading & troubleshooting of processes and machines. The process includes cold forming of steel and aluminum parts, heat treatment of aluminium & steel parts, anodizing, zinc phosphating, spray painting, CNC machining, etc.

- Support the production controllers on the scheduling of production.

- Prepare & review new process sheets, in addition to maintenance & updating of existing process sheets.

Reviewing & approving MITE for calibration of gauges, measuring instruments, machines, etc.

- Establish processes for new production parts together with the other engineers.

- Plan and coordinate tests to establish new sources of materials such as steel, aluminium, chemicals, etc.

- Design support for the R&D team on the development of new parts for ease of manufacture.

- Design & draft of cold forming tooling & gauges.

- Provide technical support for supplied parts, fabricated tooling, etc.

- Oversee and coordinate the procurement of new machines, new automation and new equipment together with the procurement department.

- Up keeping and updating of the current plant layout drawings and planning of new plant layout.

- Ad Hoc duties assigned by the superior.

Job Requirements:

- Degree in any engineering feilds

- Experience in tooling design, gauge design, jigs & fixtures design, process engineering &/ or automation in a manufacturing environment will be an advantage.

- Basic knowledge in GD&T & proficiency in AutoCAD & Solidworks will be an advantage.

- Experience with Kaizen methodology will be an advantage.

- Proficiency in Microsoft PowerPoint, Excel & Words preferred.

- Experience in conducting trouble shooting & problem analysis of manufacturing process will be an advantage,

- Willingness to travel and work overseas on short term basis, will be preferred.

About the Company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Familiar with preparation of overall layout drawing and P&IDs for various systems, related to Combined Cycle power plants
• Lead a team of engineers during bid preparation and effectively execute the tendering works
• Guide the Engineering Team through the execution phase and monitor the engineering and procurement progress
• Able to perform and review sizing calculations for various equipment (like pump / fan sizing, heat exchanger sizing, etc)
• Prepare technical evaluation of vendor offers, approve vendor drawing and coordinate with vendor during post-order stage
• Coordinate with other disciplines of engineering and site during detailed engineering stage and commissioning
• Any other duties to be assigned from time to time

Pre-requisites:

• Degree in Mechanical Engineering or equivalent
• Minimum 8 years’ relevant experience in EPC power plant projects
• Conversant with overall cycle analysis and heat balance drawings
• Familiar with International Codes and practices
• Familiar with cycle analysis programs like GT Pro / GT Master will be an added advantage
• Able to interact effectively with Owner and Owner’s Engineers on technical issues
• Prior experience in leading a team of design engineers is an added advantage

What you will do:

The Director of Engineering APAC will drive the adoption and growth of the Global Engineering function across the APAC region. Reporting to our Global Director Engineering the selected candidate will lead the Post Sales Engineering for the APAC Region. This team will continue to expand and established the Global Engineering model throughout APAC to drive post sales application engineering efficiencies. They will work closely with all post sales engineering teams globally to drive post sales application engineering efficiencies, quality, increase scalability, volume, cycle time, training, and stronger margins. The Director will lead and manage the post sales engineering enablement process for the APAC region and will work with the field engineering teams as well as the GCoE Post Sales engineering team and the regional field leadership to standardize and simplify the process between all post sales resources throughout the JCI enterprise.

How you will do it:

You will drive adoption and growth of the global engineering function across Johnson Controls by:

• Working closely with the installation leaders in the regions to identify post sales engineering needs
• Helping with communication and awareness of the post sales engineering deliverables and capabilities
• Enabling enterprise post sales support by expanding utilization of GCoE post global network
• Working to gain efficiencies by harmonizing the engineering standards and processes as much as possible throughout APAC region into a Regional/Enterprise model.
• Leveraging the Post Sales Support GCoE Network Process to improvement efficiencies and drive scale.
• Identifying quick wins and support building a short- and long-term strategies.
• Ensuring the Engineering (post-sales engineering) team is prepared to proactivity support new products and innovations once commercialized.
• Ensuring the Engineering team and GCoE has a “seat at the table” on the commercialization of the products and services.
• Standardize and simplify the process between all post sales application engineering resources in APAC through Implementation of:
• Sel-Nav for product and labor estimating as well as the post sales engineering processes
• Deployment of EPIC (Engineer Project Information Center) throughout the APAC Region for management of the engineering metrics
• Adoption of the Enterprise GCoE standard process flow between the sales teams/pre-sales teams/post-sales team and the global engineering team.
• Driving adoption of Enterprise Engineering systems and processes used by the regional/global engineering team.

What we look for:

• Bachelor's degree in Business, Economics, Engineering or similar focus
• Minimum of 10+ years’ experience in operations, engineering, sales or similar discipline driving a successful engineering team supporting a large global business
• Strong understanding of pre & post sale engineering practices, process driven and able to drive consistency in complex global situations
• leadership skills including the ability to operating successful with a matrix organization. Candidate must be able to lead and drive results across the matrix.
• Excellent analytical and interpersonal skills with strong problem-solving capabilities.
• Exceptional strategic thinking and execution capability

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

Job Description:

- Design and develop electronics hardware and embedded software for defense products.

- Collaborate with other engineering teams to implement firmware, drivers, and protocols for embedded systems.

- Write and maintain codes for embedded system using C/C++.

- Design, test, and debug electronic circuits and PCBs.

- Select and source electronics components for new product designs.

- Participate in code reviews and design discussions.

- Ensure software is designed for maintainability and scalability

Job Requirements:

- Degree in Electrical/ Electronics Engineering, Computer Engineering or a related field.

- Fundamental skill in C/C++ and real-time operating systems.

- Knowledge of microcontrollers, microprocessors and digital signal processors.

- Good understanding of electronic circuit design and PCB layout tools.

- Good problem-solving and debugging skills.

Responsibilities:

• Supervise/perform fault diagnosis, trouble shooting and maintenance of power system/component in workshops and onboard vessels
• Liaise with various departments within company and client to expedite the scope of work
• Lead a team of electricians in corrective and preventive maintenance
• Prepare work completion reports for Customer’s Acceptance.
• Perform maintenance works in accordance with vessel safety requirement
• Conduct in-depth troubleshooting of electrical connections and Programmable Logic Controllers (PLC) programs.
• Coordinate with vendors and partners, conduct design reviews with customers, and maintain documentation according to our ISO quality systems.

Requirements:

• Diploma in Electrical Engineering
• 2-5 years of relevant experience in the Marine related or Oil & Gas industry
• Candidate with no experience may apply
• Experienced dealing with 440V Main switchboard, Distribution Boards, Transformer, Power Generator, Main Engine, Converter, Inverter Batteries, Fire alarm & flooding system and Ship Control Monitoring & Management System
• Experience in troubleshooting on various brands of PLCs (Panasonic, Omron, Allen Bradley, Siemens, Mitsubishi, ABB, etc.) is advantageous
• Proficient in selection and integration of sensors, pneumatic systems, Stepper and Servo Motors & control systems, Power Supply Units, other electrical hard wares, etc.
• Possess man management experience in leading up to 6 men, including Supervisors and Technicians
• Willing to work as a team player to achieve assigned task within given timeline.
• Comfortable with report writing
• Able to work onboard vessels and at heights

• Other Information:
  Location: Changi
• Transport provided at or nearby: Jalan Bahar, Pioneer MRT, Boon Lay MRT, Lakeside MRT, Jurong West & East, Jalan Bukit Merah, Choa Chu Kang MRT, Bukit Panjang Plaza, Woodlands, Sembawang MRT, Yishun MRT, Bishan MRT, Ang Mo Kio MRT, Hougang Ave 8, Sengkang Square, Punggol Central, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5 days work week
• Working Hours: 7.45am-5pm

Job Responsibilities
• Generate the basic ISO drawings including bill of materials
• Interpret Piping, Structural, Tankage, Equipment drawings
• To understand Scope of work, Contractual Obligation and follow up
• Identifying project issue and generate technical queries to client
• Site preparation and co-ordination, preparation of submission documents
• Coordinate & liaise with various related parties including customer, consultants, sub-contractor on site to ensure project requirement are met.
• Coordinate the safety management system on site
• Manage work fronts and works deployment timely with project team
• Generate project schedule, and resources planning
• Generate method of statement and risk assessment

Job Requirements
• Diploma or Bachelor Degree in Engineering or a related discipline
• Preferably with at least 3 years’ experience in Oil & Gas and Petrochemical Industries
• Proficiencies in MS Office (Excel, Word, Project, Power Point)
• Experience in Planning & familiar with Planning software tools, Primavera (P6), Autocad shall be added value
• Have driving license will be advantage
• Resourceful, innovative and -active
• Able to adapt new work environment and able to lead independently.
• Active and positive minded

Be a part of our diverse family at Hai Leck, embracing each other as you discover your unique career potential and find your perfect fit with us. We are committed to unlocking your potential and guiding you to success. Our employees are valued down to their skills, and we are committed to training them and expanding their knowledge.

We would be pleased to welcome you at our family in Hai Leck if you are a suitable member.

Email us at [email protected] now!

Job Description

- Design, customise and build components and systems for product testing and qualification

- Perform and complete product qualification and tests in accordance with prescribed standards

- Trouble-shoot and resolve technical issues with regard to process and testing

- Collaborate and liaise with internal engineering teams / sub-contractors to ensure timely delivery of project deliverables

- Support management of workshops and laboratories

Job Requirements

- Degree or Diploma in Mechanical / Precision Engineering

- Experience in relevant engineering field

- Proficient in ASTM, BS, ISO, MIL standards

- Proficient in Solidworks

- Familiarity with pneumatics preferred

- Qualification and trained in BizSAFE Level 2 and ISO22301 preferred.

• Providing engineering and technical assistance to Sales team.
• Collaborate with the Factory on technical issues.
• Prepare quotations and manage sales orders.
• Undertake additional tasks as directed by superiors.

• Diploma in Mechanical/Electrical Engineering
• Experience in HVAC will be preferred
• Proficient in MS Excel and PowerPoint
• Able to perform technical calculation (heat load, cold load), onsite visitation.
• Singaporean only

Interested candidates can forward their CVs in MS Word format to [email protected]

Reg No. R1875181

Triton AI Pte Ltd

License no. 21C0661

• Salary up to $3,800
• Experience in HVAC will be preferred
• Able to perform technical calculation (heat load, cold load), onsite visitation.

Requirements

• Degree in Mechanical engineering or related discipline, with 5 years of relevant experience in managing maintenance projects at process plants and / or other similar process environment.
• Extensive knowledge of process, mechanical, construction, design, finance and advanced project management techniques.
• Excellent computer skills including Microsoft Office; Excel, Word, Powerpoint; Projects; Design softwares are a plus.
• Experience in managing projects to ensure that goals and objectives of the projects are accomplished within an established time frame and budget parameters
• Experienced cross-functional team leader.
• Scheduling and coordinating various activities is required.
• Central hub for communication for all technical and commercial opportunities and challenges related to project activities.
• Customer sales and services is also a part of the position and requires the ability to develop new business opportunities in refineries, terminals, and other large industrial accounts; service existing accounts, and act as a customer service representative to these accounts.
• Able to deal with change and ambiguity well for all technical and commercial opportunities and challenges related to project activities.

Responsibilities

• Plan, direct and coordinate activities associate with a given project. This can include specification review, budget / proposal preparation and bid development to include time frame, procedures to accomplish the project, staffing requirements and allotted available resources for each phase of the project.
• Reviews and understands project scope and customer requirements; communicates requirements and manage the teams including Engineering, Procurement, Construction, subcontractors and other various parties responsible for the success of the project.
• To comply with clients' tendering procedures and conditions, structuring of contract packages and appointment, administration and payment of subcontractors and suppliers.
• To identify, report and update the contract changes and modifications to the relevant parties.
• To direct and manage the performances of responsibilities delegated to the subordinate staff employed in the project.
• To ensure the job safety and environmental protection are in compliance with the company Health, Safety and Environmental procedures.
• To ensure the quality of works delivered is in accordance with the contract specifications and with the company QA / QC procedures.
• Professional relationship with clients, suppliers and Local Authorities.
• To ensure that all quotations, relevant information to the client are delivered in the current form and within the necessary time frame.

• Participate in the CQV activities of lab equipment within a GMP environment
• Protocol Development (IQ, OQ, PQ) and execution
• Interface with client personnel and with outside vendors when necessary while performing the above.
• Must have execution experience.
• The individual will manage all facets of assigned validation projects while maintaining strong communication with client representatives on project status and assistance needed.

Responsibilities

A combination of the following responsibilities and capabilities will form the seniority of post applicable.

· Design, implementation, UAT and deployment of System infrastructure solutions comprising hybrid/multi cloud requirements with on-premise virtualisation and/or hyperconverged solutions.

· Create architecture artefacts and documentations to effectively explain and present the solution design to stakeholders.

· Implementation of networking, servers and systems product.

· Conduct requirements specifications and prepare project documentations necessary, including configuration documentations for the implementations.

· Prepare and conduct User Acceptance Test and test documents.

· Candidate may also be assessed but non-mandatory, if they have other skillset & experience for taking up some responsibilities of system and system products such as:

o Implementation of high availability network infrastructure, Nex-Gen firewall and security.

o Implementation of high availability servers, OS and database clustering for Linux and/or Microsoft Windows

o Implementation of storage and backup systems

o Implementation of system monitoring and management.

o Microsoft Active Directory or LDAP, IAM/IDM system

o Implementation of multi-site and/or disaster recovery site.

o Backup, restoration and DR switch/fail-over.

Requirement/Skills

· Experienced with networking, storage, compute and security deployment.

· Certifications in CISSP or CEH will be an added advantage.

· Certifications in CISCO networking will be an added advantage.

· Certifications in VMware will be an added advantage.

· Certifications in Cyber Security will be an added advantage

· A fast learner, have a proactive attitude and an eye for quality works

· A team player - inclusive mindset to collaborate effectively in a diverse team

· Plus points will be additional advantage:

o Experienced with system hardening and VAPT will be an added advantage.

o Experienced with System Management: system logs and health monitoring/workflow implementation.

o Experienced with SIEM: security logs and security event monitoring/workflow implementation.

o Experience with backup and restoration of system.

Job Description:

• Loading, transporting and delivery of goods to and fro customers' place in safe, timely manner.
• Able to handle heavy items (our goods are metals and steel bars).
• Check goods against packing list or delivery note to ensure quantity is correct before delivery.
• Assisting with loading and unloading items from vehicles.
• Adhering to assigned routes and following time schedules.

Requirement:

• Possess Class 3 or 4 driving license.
• Familiar with Singapore route.
• Able to understand simple English.
• Physically fit.
• Safe driving record.

* 5 days work week.

* Working location: Joo Koon

Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world. 

We believe in the power of diversity and inclusion and cultivate a workplace culture of belonging that views uniqueness as a competitive edge and builds a community that enables our people to push the limits of innovation to make great products that create value and improve people's lives. 

A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary.

Job Summary

To support our extraordinary teams who build great products and contribute to our growth, we’re looking to add a Supplier Quality Engineering Manager located in Kallang, Singapore.  

Here is a glimpse of what you'll do:

• Collects and understands external and internal customers’ expectations or feedback on supplier quality, and cooperates with other top management personnel in formulating and establishing company policies, operating procedures, innovation plans, and goals for supplier quality.

• Analyzes, evaluates and presents information concerning factors related to suppliers and components such as new regulations, cost of quality, suppliers’ risks, supplier’s performance, and proposals to other members of management team.

• Cooperate with material or purchasing team to establish the supplier quality requirements and agreements.

• Lead SQE team to evaluate, develop, and monitor suppliers and components to ensure they comply with Flex requirements and customer requirements on safety, quality, capability, delivery, environment, society regulation, etc.

• Lead SQE team to measure and track suppliers’ performance and to drive problem solving and continuous improvement.

• Establish and maintain the supplier quality management process and tools, and train SQEs and all peers to ensure compliance of the supplier quality process.

• Commit cross-functional support and form good relationships with internal and external customers in order to maintain a strong support system in the organization, to achieve customer satisfaction and to comply with regulatory requirements

Here are some of our preferred skills:

• Typically requires a bachelor’s degree in related field.

• Typically requires 8 years of experience, and 3 years of managerial experience.

• Internal or external Auditor certificate for ISO 9001 is a must. Lean Six Sigma Green Belt or Black Belt certificates are preferred.

• Able to travel and audit suppliers’ process.

#LI-ELYSECWGAN

#LI-SM36
AA07

SM36

Job Category

Required Skills:

Optional Skills:

Flex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We celebrate diversity and do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

With an expanded focus on fintech and neobanks, Value Added Services (VAS) Issuing Solutions enables capabilities including digital issuance of card credentials, Transaction Controls and Notifications, issuer loyalty programs, card benefits, and ATM services in a variety of forms from API services to full-service on-behalf-of models. Issuing Solutions help Issuers perform better by delivering value added services in a consistent manner through common integrations, at scale, with global reach and evolving capabilities to meet the demands of a digital marketplace.

DPS Forward and VTC SG Team works on a wide variety of projects including DPS (Debit Processing Service) Forward, VTC (Visa Transaction Controls) and VFC (Visa Flexible Credential) to support Value Added Services (VAS) Issuing Solutions as part of the core Visa Technology Organization, driving the diversification of our revenue with products that differentiate our network and deliver valuable solutions across other rails.

You can catch a preview of our Team’s projects here: DPS Forward & Visa Transaction Controls.

We are looking for a talented and mature Sr. Manager to join our DPS Forward and VTC SG Team in Singapore!

As a Sr. Engineering Manager in the engineering team (Developers & Functional Testers), you will be reporting to the Engineering Sr Director of DPS Forward and VTC SG Team. Your focus will be to oversee the day-to-day activities of a team roughly of size 7 to start with, who will report directly to you. The team would comprise of engineers ranging from fresh college graduates to senior experienced professionals with close to 4-6 or even more years of relevant experience.

The engineers design, build and enhance solutions meant for our customers in an agile, fast-paced environment. You will be working with colleagues across the company, who will help support and challenge you every day. Designing solutions, writing code, unit testing code, developing test cases, automating test cases and frequent check-ins for continuous integration is part of the DNA of this engineering team. You will see your team’s code going to production in just a few weeks and used by strategic accounts worldwide. We need a technically strong, compassionate leader to manage this team and guide them to the next level of success. If this sounds exciting, we would love to chat and tell you more about our work culture, solutions and opportunities.

Our team, as well as our group works under the principles of a common engineering model with both development and testing expertise. You are expected to have hands-on experience and sufficient knowledge to guide the engineers and unblock them as needed on an on-going basis.

Your responsibilities will include:

• Actively oversee developer activities for feature development and bug fixing and ensure delivery of on-time, high-quality, secure code.
• Review high and low level design of new systems as well as enhancements / defect fixing that the team undertakes and provide input / proper guidance as needed.
• Ability to guide engineers to design systems in addition to guidance available from architecture team in terms of technical direction of solution to be implemented.
• Review test strategy and test cases meant for functionally testing features end-to-end, to ensure optimum quality of solutions.
• Be able to review and recommend as needed any open-source / commercial tools that the team is considering for an engineering solution.
• Stay on top of QA testing being carried out for functional testing, integration testing, regression testing, bug tracking etc. and provide input as needed to improve quality metrics.
• Working closely with peer people leaders within the team to support the team’s overall charter in a holistic way and be open to matrix management model across all team members (not just direct reports) if needed to support any project.
• Becoming the bridge / core contact point for Product, Architect, Dev & QA along with all other potential stakeholders in the pipeline for all past, on-going, and upcoming projects / features is a major responsibility for this role.
• Building relationships across different Visa teams and actively working with all stakeholders to create win-win scenarios for all concerned to collectively make progress towards Visa’s common business goal will be another major responsibility for this role.
• Having a keen eye to find opportunities in Visa where the team’s knowledge and skills can be best leveraged to drive new business opportunities will be a highly desired trait.
• Lead and provide technical mentoring to a team of talented engineers and train them on Developer and QA best practices.
• Be prepared to support engineers in troubleshooting urgent Sandbox and Production issues and drive stakeholder communication.
• Display active interest in learning about newer technologies and business use cases to build the next generation of payment solutions.
• Help our clients achieve their business goals by understanding their requirements and delivering the best solution.
• Collaborate with Project Managers to plan timely and smooth releases of features into Sandbox and Production environments. Remove obstacles that impede work processes.
• Help plan team backlog work and oversee adherence to Agile / Scrum process every sprint. Unblock them on different aspects as needed to help make progress.
• Lead meetings and discussions with Product and Architecture teams.
• Mentor and motivate people to drive engagement within the team.
• Conduct regular 1:1 meeting, quarterly OKR settings, and performance reviews for team members.
• Drive behaviors that align with Visa Leadership Principles.
• Hire, develop and retain employees with diverse backgrounds.
• Spend time training and grooming high potential employees (succession planning).
• Develop close working relationships with members of different teams within the organization.
• Become knowledgeable in Visa's core technology, infrastructure, and standards.
• Actively participate in Visa Singapore technology, innovation and other events and help lead and organize some of these activities.

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

- QA / QC

- Oversee site progress and completion on time

- Liaise with Clients Representative for site inspection works

- Liaise with production team to clear inspection

- Minimum 3 to 5 years experience in similar capacity

- Willing to work overtime when required

- Passionate and self motivated

We are looking for a highly self-motivated individual to work as research engineer in School of Civil and Environmental Engineering (CEE).

Key Responsibilities:

• Manage and lead onsite pilot operation
• Carry out routine monitoring through sampling and analysis
• Liaise with different stakeholders ie. collaborators, funding agency
• Write progress reports and present project progress in timely manner

Job Requirements:

• Bachelor’s degree in Environmental Engineering, or a related field
• Experience in reactor operations, especially pilot-scale would be beneficial
• Ability to handle basic sample analysis is required
• Good oral and written communication skills in English
• Ability to work independently in an outdoor environment

We regret to inform that only shortlisted candidates will be notified.

Job Description & Requirements

1. Formulate business planning, management strategy program in optimizing current and potential market opportunities and business performance.
2. Lead and oversee a team of Sales Engineers in achieving sales target and goals.
3. Resourceful in developing new customer's base and secure improving sales target on existing customers.
4. Analyze Profit / Loss of projects and providing cost control and cost effectiveness strategy.
5. Ensure effective control of resources in providing quality / cost efficiency and on time delivery service for customers.
6. Respond to customers' enquiries, follow-up and provide technical solutions to clients.
7. Compiling and review contractual quotation for existing and new products as per customer's enquiries.
8. Provide regular update to customers on project development in a timely manner.
9. Prepare monthly sales input / output and making use of data to make sound analysis and decision.
10. Initiate and develop good customer service and rapport with customer and always ready to serve customer better.
11. Perform risk assessment for all new enquiries.
12. Ensure compliance with any applicable regulatory requirements as defined by customer.
13. Manage the configuration management including subsequent engineering change.
14. Oversee the control of documents/drawings.
15. Participate in the implementation of risk assessment and risk control of medical devices.

• Preferred to have Diploma in mechanical / precision engineering field or equivalent.
• At least 5 years of working experience in Sales position in the precision engineering inductry and with proven track record of sales performance.
• Good presentation skills.
• Self-starter and result orientated.
• Able to work independently and deal with organizations that is diverse in size ownership, sophisticated and cultural point of view.
• Outgoing, charismatic personality and good social skills.
• Must possess class 3 driving license and own vehicle.