1) Plan machining by studying engineering drawings with understanding of General Dimensions / Tolerances.

2) Programming by entering instructions, including zero and reference points; setting tools and parameters.

3) Handle all CNC machine related mechanism

4) Verify settings with measurable and First-Off parts against drawings

5) Ensure safe operations and handling at all times

6) Practice preventive maintenance on machines

• Reports to the Safety Manager
• Liaise closely with authorities
• Familiar with local law and regulations
• Take charge and handle public feedback
• In charge of all environmental control programs and lead the environmental team
• Maintain proper documentation i.e. Site environmental Report, daily environmental inspection report etc.
• Conducting environmental workshops and training for the project
• In charge of pre-project planning and advice on the measures to take in areas on noise/water/air pollution control, waste/pest infestation control, and public/neighbors’ engagement and management

Job Requirements:

• A Registered ECO with NEA
• A Registered ECMO with IES
• Attained Specialist Diploma in WSH or equivalent
• Minimum 3 years’ post-registration experience as ECO for LTA projects
• Experience in civil works (road and viaduct) & ASAC awards preferred
• Proficient in GGBS requirements/implementation and ISO14001:2015 standards
• Proficient with MS Office
• Location: Woodlands
• Project: Infrastructure, Viaducts

1. Plan machining by studying engineering drawings with

understanding of General Dimensions / Tolerances.

2. Programming by entering instructions, including zero and

reference points; setting tools and parameters.

3. Handle all CNC machine related mechanism

4. Verify settings with measurable and First-Off parts against

drawings

5. Ensure safe operations and handling at all times
6. Practice preventive maintenance on machines

1) Proficiency in Precision Machining Programming using CAM Software

2) Design Jig and Fixtures for precision machining works.

3) Lead and organize the machinists and operators in daily CNC Machinery operations works

4) Responsible for daily Productivity and Quality improvement studies, plans and implementation.

5) Responsible for and take charge of 5S activities in housekeeping of workplace

NTI-NTU Corporate Laboratory is a collaboration between Nanofilm Technologies International Limited (“Nanofilm”, “NTI”), Nanyang Technological University (“NTU”) and supported by Singapore under RIE2025. The Laboratory’s objective is to propel Innovation and Technologies commercialisation through NTU’s innovation and NTI’s deep technology. NTI-NTU Corporate Laboratory aligns with Singapore’s RIE2025 handbook – which emphasises the nation’s commitment to research and innovation, aiming to drive economic growth and address national challenges.

The Nanyang Technological University NTI-NTU Corporate Laboratory is seeking to hire a Senior Research Fellow. The selected candidate will innovate in semiconductor packaging, focusing on metallization and wafer packaging.

Key Responsibilities:

• Optimize plasma-enhanced metallization, vacuum coating processes, and leading R&D efforts in material science for device performance enhancement.

• Drive the development and implementation of advanced metallization techniques.

• Propose relevant vacuum coating solutions, conducting plasma simulations to refine processes.

• Oversee the transition from experimental designs to scalable solutions.

• Additionally, the role requires preparation and delivery of comprehensive reports to satisfy the stipulations of funding entities and corporate mandates.

Job Requirements:

• Ph.D. in a relevant engineering or science discipline is required.

• At least ten years of specialized post-doctoral experience.

• Expertise in plasma simulations (ANSYS, COMSOL) and a strong track record of research publications and successful grant applications are essential.

• Applicants must demonstrate effective collaboration skills in multidisciplinary settings.

We regret that only shortlisted candidates will be notified.

• Experienced Structural Steel Detailer with good knowledge of Tekla 3D Modelling
• Well versed in using Tekla Structures or Autodesk advance steel, AutoCAD and Sketch-up software
• Min. 2 - 3 years’ experience (in structural steel detailing is an added advantage)
• Coordination and preparation of specification and plans and to liaise with Project Managers and Engineers for technical drawings and submission approval
• Review and verify drawings to ensure compliance with design specifications and guidelines
• Maintain good document control and filing
• Able to undertake any other duties assigned Requirement
• Drafting of structural drawing
• Prepare detailed shop drawings
• To coordinate with production
• Must be willing to work as a team and show work commitment
• Bachelor Degree
• Knowledge in Structural Steelworks or Equivalent.
• Able Work from home

Job description

• Set up and operate CNC milling machines on workpieces according to job order
• Meet production schedule and target
• Provide suggestions to increase efficienct and productivity
• Daily incoming jobs assigned by supervisor
• Maintain safe operations by adhering to safety procedures and regulations
• Maintain all equipment, machines and area cleaning
• Assist tema leaders by giving constructive ideas and feedback to improve production process

Job specification

• Ability to read technical drawings
• At least 3 years of relevant working exprience handling machines
• Has ability to operate machines and tools independently
• Positive attitude and initiative

Interest parties may email to [email protected] or call 6749 9386 to find out more!

Summary

Responsible for the full suite of ACMV Quantity Surveyor duties, from tender to pre-contract, post contract administration duties such as: review of contracts, quantity take-offs, preparing bills of quantities and sourcing.

Job Responsibility

· Knowledgeable in Chilled Water System and VRV system

· Responsible for tender surveying, checking of documents, and understanding of drawing and specifications

· Preparation of tender and contract documents, including quantity take off & liaise with Clients & consultants

· Obtain, compile and evaluate quotation from supplier according to tender requirement.

· Preparing, negotiating, and analysing costs for tenders.

· To liaise with the supplier, main contractors, and sub-contractors to prepare the costing for tender submission

· Respond and follow up to client’s queries for submitted tender

· Attend site briefing (if necessary) during pre-tender and tender interview

· Coordinating submission of documents to clients and relevant authorities within stipulated timelines.

· Maintain proper documents and filing of drawings for all tenders and project according to requirements as per ISO standards

· Other related duties, as assigned.

Job Requirements

· At least a Diploma, Advanced /Higher /Graduate Diploma /Degree, Engineering (Mechanical) in Quantity Surveying or Equivalent

· Min 5 years of Singapore-based experience as a Senior Quantity Surveyor in the ACMV field.

· Positive working attitude and a team player

· Full-Time position(s) available.

· Able to work independently good team player

Job Description:

• Quantity take-off and cost estimation sourcing of contractors and suppliers
• Understanding the requirements, prepare and submit tenders with specific deadline
• Liaise and coordinate with the Consultants, Clients and Sub-contractors
• Contract and tender document administration
• Collaborate with project team and tender department to ensure all drawings are in order as per design requirements.

Requirements:

• Degree/Diploma in Quantity Surveying Mechanical Engineering (P&S, ELECTRICAL or ACMV & etc)
• Minimum 2-3 years relevant experience in building and construction industries.
• Fresh graduate is welcome to apply
• Possess strong project organizational skills, resourceful, energetic and able to work independently as well as in a team
• Good communication, interpersonal and problem solving skills

Please indicate the below information in your resume:

o Current & expected salary

o Reason(s) for Leaving

o Availability to commence work

• Oversee construction sites to ensure compliance with health and safety protocols, conducting hazard assessments, risk evaluations, regular inspections, and maintaining safety programs.
• Collaborate with the site foreman to organize construction activities on site, providing regular updates to the project manager.
• Coordinate and manage Mechanical and Electrical (M&E) site works during building construction.
• Ensure timely completion of all M&E works, adhering to established standards, codes of practice, and safety regulations.
• Supervise and coordinate M&E activities at the construction site, ensuring seamless integration with other construction processes.
• Monitor and evaluate progress, quality of workmanship, and adherence to established standards and regulations.

Job Descriptions:

· Create accurate and organized structural Revit (BIM) models and/or AutoCAD drawings

· Prepares 2D and 3D presentations / design drawings according to requirement

· Develop plan, elevation, section, and detail drawings from the models with adequate detail and proper annotation for tender and construction.

· Develop and maintain office BIM/CAD standards and procedures for sheet layout, layering, modelling processes and drawing formats.

· Work productively and coordinate activities on numerous projects concurrently.

· Ability to work individually and as part of a team to meet deadlines

Job Requirements:

· Basic hand drafting skills

· Experience utilizing Autodesk Revit modelling and AutoCAD software

· Ability to read and understand architectural and structural construction documents

· Excellent time management skills

Software Experience Requirements

· BIM Modelling Revit MEP

· AutoCAD

· Proficient in Microsoft Office

• Oversee maintenance and instrumentation activities in manufacturing plants to ensure safe and smooth operations.
• Coordinate and execute major field maintenance projects, prioritizing worker safety and facility integrity.
• Liaise with internal and external stakeholders to coordinate maintenance activities, ensuring timely completion and minimal disruption to plant operations.
• Conduct instrumentation application studies and modify plant facilities to align with technical specifications and business requirements.
• Conduct training sessions for staff and contractors to enhance their skills and competencies.
• Implement management systems based on ISO 9001, ISO 14001, and SS506 standards.

• Bachelor's degree in Electrical Engineering with a focus on Power/Energy Modules.
• Basic knowledge of programmable logic controllers (PLC) and human-machine interfaces (HMI) is advantageous
• Strong analytical and problem-solving skills.
• Ability to communicate effectively with staff across different functions and contractors. A spirit of collaboration and teamwork is essential.

Interested candidates are invited to forward their CVs in MS Word format to [email protected]

Reg No: R1875181

Triton AI Pte Ltd

License No: 21C0661

• Permanent position, Salary up to $5,500 + AWS + bonus
• Jurong Island, Singapore (Transport provided at designated point)

Job Description

• To supervise Drivers, Operators, General workers and maintenance of equipment at site.
• Assist and support Project Manager in handling and monitoring smooth progress of project.
• To ensure and carried out site work in accordance to construction programme safely.
• Must be familiar with all roads, drainage, sewers and all other infrastructure construction.
• To carry out all site works issues and ad-hoc duties when instructed.

Requirements

• Candidate to possess relevant certificates and Building Construction Supervisors Safety Course Certificate (BCSS).
• At least 3 years of working experience in the related field.
• Preferably with Class 3 Driving licence.
• Good communication, self-initiative and interpersonal skills.

Job Description

• Plans and controls the execution of the project. Prepares the manpower, machinery and materials requirement on site. To confirm the duration of each critical activity and construction programme.
• Regulates current activities with regards to work methods, technical solutions, resources input and other operational details.
• Delegate duties to respective site personnel such as Foreman, Project Engineers, Safety Officer, Quantity Surveyor and Site Clerk.
• Co-ordinates matters pertaining to site progress. Manpower and machinery utilisation, mobilisation schedule, certification of payment, site disputes, planning of site facilities and workers quarters etc.
• Communicates and maintains public relation with relevant parties and local authorities.
• Prepare and compile site progress reports for progress claims and monitoring project activities.
• To verify work done by subcontractors.
• To carry out other site works job duties as instructed.

Requirements

• Candidate to possess Bachelor’s Degree in Civil Engineering and relevant certificates.
• At least 3 years of working experience in the construction field.
• Preferably with Class 3 Driving licence.
• Good interpersonal and communication skills. Leadership, problem-solving and multi-tasking skills.

Job Responsibilities

• To supervise Drivers, Operators, General workers and maintenance of equipment at site.
• Assist and support Project Manager in handling and monitoring smooth progress of project.
• To ensure and carried out site work in accordance to construction programme safetly.
• Must be familiar with all roads, drainage, sewers and all other infrastructure construction.
• To carry out all site works issues and ad-hoc duties when instructed.

Requirements

• Candidate must possess Bachelor’s degree in Civil Engineering (RE Recognised)
• Candidate to possess relevant certificates and Building Construction Supervisors Safety Course Certificate (BCSS)
• At least 3 years of working experience in the related field
• Preferably with Class 3 Driving Licence
• Good communication, self-initiative and interpersonal skills

The Institute for Digital Molecular Analytics and Science (IDMxS) invites applications for the position of Research Fellow.

Polarisation variations in a focused beam are not restricted by the traditional diffraction limit and superoscillatory, i.e. very high spatial frequency, variations are possible. Engineering of focused polarisation structures can be achieved, for example, through wavefront shaping and polarisation control of incident beams. Illumination of proteins or other small bioparticles with such superoscillatory polarisation structured light offers opportunities in detection of conformational changes or nano-displacements which can observed with high sensitivity in polarisation space, even though there is no observable variation in the intensity domain. In this project we seek to determine optimal polarisation structures and determine expected sensitivity through analytic and computational means. Viability of experimental detection will be assessed and potentially pursued.

Key Responsibilities: 

• Analytically and computationally model polarisation structure of focused light.

• Rigorously model electromagnetic scattering from complex proteins and bioparticles/molecules

• Optimise proposed scheme to enhance sensitivity to particle displacements and conformational variations

• Establish quantitative particle analysis techniques exploiting polarisation engineering

• Assess experimental feasibility and establish tolerance limits

• Build experimental setup and perform associated experiments for detection of nanodisplacements and conformational changes

• Disseminate results through publication in top-tier journals and conference presentations

• Contribute to research administration and assist in grant writing as required

• Supervise PhD and undergraduate student projects as required

Job Requirements: 

• PhD Degree in Physics/Engineering or related disciplines

• Active and strong theoretical and experimental knowledge of optical polarization, single particle dynamics and detection

• Experience in optical beam engineering and wavefront shaping

• Knowledge of optical scattering and biomolecular kinetics would be helpful

• Good writing and communication skills

We regret that only shortlisted candidates will be notified.

The School of Mechanical & Aerospace Engineering (MAE) invites applications for the position of Research Associate.

 
Key Responsibilities: 

• Work on human-like traffic simulation, with the focus of modeling traffic behaviors from large-scale real-world datasets.​

• The work will involve traffic scene representation, behavior modeling with common sense and prediction, generating road layouts, initializing states of traffic agents, rendering in physical simulators, and experimental validation.

Job Requirements: 

• At least have a Masters Degree in Mechanical Engineering, Robotics, Mechatronics, Automation and Control Engineering, Artificial Intelligence (AI), etc.

• Relevant working experience will be preferred.

• Strong background in autonomous driving, simulator, AI, and automation.

• Good communication skills and the ability to work independently and facilitate projects with minimal supervisiont

• Able to contribute to Journal/Conference papers with good presentation skills

• Able to plan and organize well and adhere to deadlines.

We regret that only shortlisted candidates will be notified.

Duties & Responsibilities

As an LED Technician, you will be responsible for the installation, maintenance, and troubleshooting of LED lighting systems. Your role involves working with various LED technologies, ensuring optimal performance, and providing technical support as needed. This position requires a combination of technical expertise, problem-solving skills, and a commitment to delivering high-quality LED solutions.

1. Installation and Configuration:Install and set up LED lighting systems in accordance with specifications and industry standards.
   Configure LED controllers, drivers, and associated components to ensure seamless functionality.
   
2. Maintenance and Upkeep:Conduct routine inspections and maintenance of installed LED systems to identify and address any issues promptly.
   Replace faulty components and perform upgrades to enhance system performance.
   
3. Programming and Tuning:Program LED controllers and drivers to achieve desired lighting effects and meet customer requirements.
   Fine-tune LED systems for optimal brightness, color accuracy, and energy efficiency.
   
4. Troubleshooting:Diagnose and troubleshoot technical issues with LED installations.
   Collaborate with cross-functional teams to identify and implement effective solutions.
   
5. Quality Assurance:Ensure that all LED installations meet quality standards and comply with safety regulations.
   Conduct testing and validation procedures to guarantee the reliability of LED systems.
   
6. Documentation:Maintain accurate records of all installations, configurations, and maintenance activities.
   Create comprehensive documentation for reference and future troubleshooting.
   
7. Customer Support:Provide technical support to customers and address inquiries related to LED systems.
   Offer guidance on best practices for optimal system performance.
   

Requirements

• A minimum of 2 years of experiences in LED installation, programming, repair, and maintenance.
• High School diploma or equivalent: additional technical certifications are a plus.
• Strong understanding of electrical systems and wiring.
• Licensed Driver in Singapore with Lorry Driving experience is a plus.
• Effective communication skills for interacting with clients and team members.

The School of Electrical and Electronic Engineering (NTU EEE) invites applications for the position of Research Fellow. The researchers will work on a project on Li-ion battery ageing analysis and experiment testing, funded by Astar.

Key Responsibilities:

• Perform experiment testing for Li-ion batteries

• Develop heath indicators based on the experiment testing data

• Develop machine learning models for battery health assessment and remaining useful life prediction

Job Requirements:

• PhD degree in Electrical Engineering or related subjects.

• Expert knowledge in Li-ion batteries and machine learning techniques, as well experiment testing

• Research experience with battery ageing analysis, machine learning model development.

• Excellent verbal and written communication skills in English.

• Strong analytical and conceptual abilities.

• Able to work independently and in a team to realize proposed research work.

• Publication track record is an advantage

• Proficiency in basics of programming languages such as matlab and Python

We regret that only shortlisted candidates will be notified.

The School of Electrical and Electronic Engineering (NTU EEE) invites applications for the position of Research Fellow. The researchers will work on a joint research project between NTU and SP (Singapore Power) company to conduct the research on development of Risk based Asset Investment and Planning Optimization.

Key Responsibilities:

• Develop asset heath index for transformers, switchgears, and cables.

• Develop criticality index and risk matrix for power asset assessment.

• Develop optimization methods for asset renewal and replacement investment.

Job Requirements:

• PhD degree in Electrical Engineering or related subjects.

• Expert knowledge in power system modeling and simulation

• Research experience with power asset health modeling and data analytics.

• Excellent verbal and written communication skills in English.

• Strong analytical and conceptual abilities.

• Able to work independently and in a team to realize proposed research work.

• Publication track record is an advantage

• Proficiency in basics of programming languages such as matlab and Python

We regret that only shortlisted candidates will be notified.

• Reports to Resident Surveyor
• Responsible for surveying works during the full phases of a construction, ensuring measurements and calculations conducted at survey sites are accurate
• Levelling, traversing, setting-out, data collecting, topography, settlement monitoring, etc.
• Perform land surveying / measurements using variety of specialist technical equipment
• Perform levelling and traversing to transfer TBM and reference line
• Coordinate and planning daily site survey works
• Prepare the setting out drawing for construction purpose
• Report daily survey works to Project Resident Surveyor
• Liaise with engineer/sub con on technical issues

Job Requirements:

• Diploma/Degree in Land Surveying or Geo-spatial information and technology or equivalent
• Minimum of 3 years relevant experiences as Surveyor, preferably with LTA infrastructure projects
• Well- versed in using total station
• Candidate should have technical expertise and knowledge in Civil Engineering Construction especially in foundation, structural, ERSS and viaduct
• Must be proficient in Microsoft Excel and Auto CAD
• Candidates with CSCPM/BCSS/Confined space/Work At Height certificates would be an advantage
• Competent to generate technical computation independently
• Good interpersonal skills
• Location : Woodlands
• Project : Viaducts

The eVTOL Research and Innovation Centre at Nanyang Technological University, Singapore, is looking for a Research Engineer II in the area of Stress Engineering.

Key Responsibilities:

• Conduct structural analysis and assess the strength and durability of aircraft components, ensuring compliance with industry standards and regulations.
• Utilize Finite Element Analysis (FEA) methods to model and simulate structural behaviour under various loading conditions.
• Collaborate with the aircraft design team to provide input on structural considerations during the design phase.
• Develop, validate, and execute FEM models to analyse stress, strain, and deformation of aircraft structures.
• Perform static and dynamic analysis using FEM tools and methodologies.
• Investigate and identify the root causes of structural failures or anomalies, providing recommendations for corrective actions.
• Plan and conduct critical stress testing including the material equivalency test, sub-component test and proof load test, etc.
• Work closely with cross-functional teams to implement design improvements based on analysis findings.
• Ensure that all structural designs and analyses comply with relevant aviation regulations and industry standards.

Job Requirements:

• Master’s degree in Aerospace Engineering, Mechanical Engineering, or a related field.
• Proven experience as a Stress Engineer in the aerospace industry or automobile industry.
• Strong proficiency in Finite Element Analysis (FEA) tools and software.
• Experience in CAD Modelling.
• Familiarity with carbon fibre materials and relevant industry regulations.
• Excellent problem-solving skills and attention to detail.
• Effective communication skills for collaboration with interdisciplinary teams.
• Fluent English skill is a must.

We regret that only shortlisted candidates will be notified.

Established in 1981, the School of Electrical and Electronic Engineering (EEE) is one of the three founding Schools of the Nanyang Technological University, Singapore. Built on a culture of excellence, the School is renowned for its high academic standards and extensive research activities. To support advanced research, the School hosts 13 research centres which are well-equipped with sophisticated and state-of-the-art equipment. Besides the 13 centres, there are more than 60 laboratories, supporting both the teaching and research activities in the School.
 

NTU EEE is now one of the top-ranked schools in the world, ranked 2nd globally by subject in the U.S. News and World Report Best Global Universities Rankings 2022 and 4th worldwide in the QS University Rankings by Subject 2022 (Electrical and Electronic Engineering).
 

Join the School of Electrical and Electronic Engineering, College of Engineering,
Nanyang Technological University, Singapore as a faculty member and embark on a challenging and exciting career in teaching and research excellence, so as to prepare engineering leaders of the future.
 

The School invites applications for two non-tenure-track Senior Lecturer/Lecturer positions in Computational Systems and Engineering.
 

Position Description
Applicants should have at least a Master’s degree in Electrical and Electronic
Engineering, or Computer Science/Engineering, or a closely related discipline.
Candidates who have a Bachelor’s degree and extensive industry or vocational
experience may also be considered. A strong background and teaching experience in one or more of the following areas is required: Software Engineering, Computing and Programming (Python, C, Object-oriented Programming, and Assembly Language Programming), Microprocessor, Computer Architecture, Internet and Mobile Services and Applications, Database Systems, Web Applications, Wireless Communications, Computer Communication and Networking, Cyber-Physical Systems, Cyber Security, Internet of Things, AI and Machine learning, Pattern Recognition, Data Mining/Analytics and Natural Language Processing.

Fresh PhD graduates would be considered but preferences are given to candidates with relevant working/teaching experience in universities.

Responsibilities
The successful candidates are expected to teach courses in the fields of Computational Systems and Engineering at the undergraduate and postgraduate levels, and supervise undergraduate and postgraduate students.
 

Application
Applicants are invited to submit their applications (cover letter, CV, research and teaching statements, and citation report, where applicable) through the NTU career portal.

Review of applications and shortlisting of applicants will be carried out on an on-going basis until the positions are filled. Only shortlisted candidates will be notified.

Company: CRYSTAL SL Global Pte Ltd

Responsibilities and Duties

• Provide support in Director’s personal matters (e.g. vehicle related, insurance, driver arrangements, family-related and etc.).
• Coordinate with various stakeholders to manage Director’s extremely busy calendar for appointments, meetings, travelling time and prioritise calendar events.
• Ensure closely monitoring of all schedules, meetings and appointment are being carried out with the respective personnel.
• Take and circulate minutes of regular meetings and follow up on action items stated in the minutes (if requested).
• Organize travel plans and itineraries of the Director and make necessary booking arrangements (flights, land transfer, accommodations etc.)
• Organize and file Director’s documents daily and perform day-to-day administrative work.
• Organize and submit Director’s expenses claims.
• Proactively follow up on actions items/tasks assigned by Director.
• Proof-read all documents for external parties.
• Perform any other duty as directed by management.

Responsibilities:

· Develop systems design, programming and selection of equipment instrumentation and controls.

• Prepare and review I&C specifications, requirement, drawings, e.g. instrument lists and datasheets/specifications, ICA panels, control valve, process functional description and SLD

· Responsible for Single Line Drawing, Control Schematic drawings, and programming of SCADA/HMI necessary modification of existing programme.

• Participate in the development of P&ID's, package specifications, logic diagrams, cause & effects, control narratives
• Prepare RFQs, technical bid summaries and make purchase recommendations
• Lead and Interface with suppliers, clients, and other engineers on ICA

· Execution of projects.

· Startup, testing, commissioning and troubleshooting of plants

· Preparation and support tender team for tender and proposal activities.

Requirements:

• Degree in Electrical & Electronics / Instrumentation / Automation Engineering.
• Minimum 15 years relevant working experience, preferably with experiences in Instrumentation and Control.
• Knowledge in Instrumentation and Control.
• Knowledge in high end fieldbus communication (eg. profibus, modbus and other high end communication protocol).
• Able to read & understand single line diagram and generate Bill of Materials from single line diagram.
• Knowledge on control, schematics, motor controls and materials take-off.
• Knowledge in Mitsubishi / Siemens / Schneider / Omron PLC software would be an added advantage.
• Those with relevant project management, process design, and service & maintenance experience will be an added advantage.
• Possess good communication and interpersonal skill.
• Highly motivated, driven by excellence and having an eye for details.
• Able to take on numerous challenging tasks while simultaneously meeting high standards and deadlines/vision.

An attractive remuneration package, benefits, challenging work environment and excellent career growth in the company would be offered to the successful candidate.

Additional Information