Responsibilities:

• Develop and maintain the project schedule in order to manage efficiently the time and commitments of the projects
• To develop, monitor and review equipment and manpower deployment plans for construction works
• Responsible for developing and updating the various stages of pre-construction and construction programs to Project Management team
• To perform monthly/weekly/daily project progress reporting activities
• To provide information and assist in the analysis of claims utilizing schedule information and capabilities of the scheduling system to provide accurate picture of construction activities and events
• To define the specific activities taking into consideration the Master Project Schedule, as well as labour, material and equipment availabilities throughout the length of the project
• Review actual weekly progress which include the Actual progress S-Curve & Manpower Histogram compared to the approved Baseline
• Plan and forecast work schedule of weekly, monthly work and set productivity to be achieved
• Maintain Baseline Schedule, and update current schedule periodically and analyse the effect of any proposed changes and any additional activities in the project, using Primavera P6 or Microsoft Project software
• To monitor the progress of projects with the mindset to continuously improve, reassess and improve planned schedules in accordance with site conditions and contractual obligations. Update and propose changes to the management especially in the event of any schedule variances
• Take periodic walk around at the project site to check actual work progress and also take progress photo for file and presentation to the management
• Any other duties deemed necessary

Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent
• 3-5 years Project Planning experience in Oil/Gas and Petrochemical Industries
• Demonstrate Primavera Project Planning software of P6 operating expertise or knowledge of Microsoft Project software and MS Office
• Excellent communication and presentation skills
• Experience in analysing, report writing and preparation

We are looking for a dynamic and customer-centric individual to join our call center team as a Customer Care Officer. In this role, you will be the first point of contact for our valued customers, providing top-notch service and assistance. If this sounds like YOU, connect with us TODAY!

Responsibilities:

• Handle inbound / outbound calls, emails, and chats from customers with professionalism and empathy
• Assist customers in navigating respective website and online services
• Maintain accurate records of customer interactions and transactions
• Collaborate with other team members to improve processes and enhance customer satisfaction
• Stay up-to-date with product knowledge and company policies
• To consistently meet set KPIs without compromising on quality service delivery

Requirements

• Strong communication skills, both verbal and written
• Customer-focused with a genuine passion for helping people
• Basic computer proficiency
• Ability to work well in a team and adapt to a fast-paced environment

*Prior call centre experience would be an advantage

We offer competitive compensation, ongoing training, and a supportive work environment.

If you’re enthusiastic, eager to learn, and ready to make a positive impact on our customers, we want to hear from you! Join our team and be part of an exciting customer care experience.

Interested candidates may WhatsApp us at 6015 6788 or email us at [email protected]

Responsibilities:

• Troubleshoot various aircon systems (wall mounted, ceiling cassette, ducted units, AHU, cooling towers).
• Knowledgeable in VRV systems (all brands), chilled water systems, and split units.
• Perform chemical cleaning and routine servicing.
• Installation skills are a plus.

Job Requirements:

• Experience in aircon servicing and troubleshooting.
• Class 3 Driving License is advantageous.
• Strong work ethic and customer service skills.

EA Personnel Name: Wong Choo Sian
EA Personnel No: R1762582
EA Licence No: 23C1703

Responsibilities:

• Create detailed 2D and 3D CAD models and mechanical drawings of components and assemblies.
• Work closely with engineers to translate design concepts into accurate technical drawings.
• Ensure compliance with design guidelines, standards, and specifications.
• Collaborate with cross-functional teams to resolve design-related issues and provide solutions.
• Review and revise drawings based on feedback and design changes to engineering standards such as ASME Y14.5-2009.
• Assist in prototype development and testing.
• Maintain documentation and records of design revisions and updates.

Requirements:

• Diploma in Mechanical Engineering or it's equivalent
• At least 3 years’ related working experience.
• Knowledge of AutoCAD, 3D Modelling and computer software (Inventor, etc.)

Interested candidates who wish to apply for the advertised position, please send in your resume to [email protected].

EA License No: 13C6305

Reg. No.: R1874608

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsibilities

• Overseeing and directing construction project to completion stage
• Monitor compliance with building and safety regulations
• Coordinate and direct workers and subcontractors
• Select tools, materials, equipment and track inventory
• Meet contractual conditions of performance
• Review the work progress and prepare internal and external reports
• Ensure quality construction standards and the use of proper construction techniques
• Develop, coordinate and review on project design and construction risks;
• Work with Construction Manager and Design Manager to prepare a comprehensive risk register;
• Responsible to implement hazard identification and risk management methodology in carrying out the works safely;
• Support in planning the major detail construction methods, sequences and identifying/assessing the risk and hazard;
• Reviewing the performance of the construction works, including any hazard or risk that may arise.

Requirements

• Tertiary qualification in Civil and Structural Engineering
• Minimum 5 years of relevant working experience in a similar capacity in the Construction industry
• Comprehensive understanding of the contract documents (drawings and specifications), phasing plans, construction sequencing and project schedule
• Well-experienced in LTA/PUB projects
• Strong leadership and supervisory skills
• A team player with good communication skills
• Meticulous and attentive to detailsMust be trained in hazard identification and risk management methodology

Duties

• Proficient in Autocad and Revit
• Relevant experience in Singapore Consultancy firm, involved in preparing and drafting civil & structural drawings using Revit and AutoCAD
• Work closely with Engineers, ensure successful completion of assignment within given timeline.
• to assume responsibilities of projects on the drafting, procedures, drawing preparation for all stages
• Collaborate and Coordinate with other disciplines design-changes and model challenges.
• To carry out drafting work in compliance with office standards and procedures.
• Prepare Authority submission drawings.
• To adopt proper procedures and drafting for the different project stages & authority submissions.
• To work closely with the Project Engineer, assisting him/her in liaison with the Technical Teams as necessary.
• To coordinate with the personnel assigned to the projects, and ensure consistency in output & presentation.

Job requirements:

1. At least 3 year(s) of working experience in the related field is required for this position.
2. Familiarity with the Singapore authority’s submission requirements would be an added advantage
3. Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma in Civil & Structural Engineering
4. Site Experience in LTA Projects or road diversion project is preferredJob scope

Interested applicant, please send your current resume and state expected salary. Kindly note that only shortlisted candidates will be notified.

Responsibilities:

• Manage and oversee the overall construction project management.
• Coordinate and collaborate with internal teams, subcontractors, and suppliers to ensure smooth project execution.
• Monitor and manage project schedules, budgets, and resources.
• Ensure compliance with safety regulations and project quality standards.
• Identify and resolve any operational issues or challenges that may arise.
• Provide leadership and guidance to the construction team.
• Prepare progress reports and updates for senior management.
• Continuously evaluate and improve construction processes and procedures.

Requirements:

• Degree or diploma in Civil Engineering or equivalent.
• At least 4 – 6 years of experience in project management, preferably from the construction/ civil engineering industry.

Interested candidates who wish to apply for the advertised position, please send in your resume to [email protected].

EA License No: 13C6305

Reg. No.: R24120209

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Description:

• Manage customer’s RFQ, review quote package
• Collaborate with customers and internal resource to define requirements
• Generate accurate and detailed quote summary for review
• Apply work knowledge to improve quote formats and output efficiency

Job Requirement:

• Diploma / Higher Nitec, preferably in Mechanical or Precision engineering.
• Preferably with 5 years experiences in precision machine shop environment.
• Must be able to interpret technical drawings, BOM and GD&T.
• Review material specifications, surface coating and material pre/post treatment
• Familiar with CNC metal machining process like turning and milling etc.
• Meticulous and excellent with details
• Pleasant personality and able to communicate well with customers for their request.
• Well verse in Microsoft WORDS and EXCEL.

Responsibilities:

• Provide technical support to the clients.
• Lead and supervise a team of technicians and/ or engineers in the installation, maintenance, and troubleshooting.
• Collaborate with clients to understand their requirements and provide customized solutions.
• Conduct site surveys and assessments.
• Ensure compliance with industry standards and regulations.
• Provide technical support and guidance to clients and internal teams.
• Follow up maintenance contract and ensure work completion on time.
• Ad hoc duties as assigned.

Requirements:

• Degree or Diploma in Electrical, Electronics Engineering or equivalent.
• At least 3 – 5 years of relevant experience in DC system or UPS industry.
• Ability to start work within short notice is advantageous.

Interested candidates who wish to apply for the advertised position, please send in your resume to [email protected].

EA License No: 13C6305

Reg. No.: R24120209

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsibilities

• Drafting & designing of routing for Electrical building services drawings in AutoCAD
• Prepare detail design and working drawings such as schematic diagrams, single-line diagrams arrangement/layout drawings.
• Coordinate with Engineering team to ensure works are carried out in accordance with drawing specification.
• Update all drawings as per site/vendor modifications for As-Built Drawings.
• Ensure compliance to Electrical Standards
• Candidate will require to design and draw for Building services, e.g., Electrical, Air conditioning, Plumbing, Sanitary and Fire Protection services etc.
• Attending the meeting with consultants, contractors as part of project.
• Familiarity with 3D modelling tools is preferred.
• Required to maintain all drawing files, update drawings as needed, and make corrections to drawings as directed by the Section Heads / Leads.
• Coordination of drawings with Clients / Main Contractors and updating of drawings base on Meetings and discussion and in compliance to Regulation Codes and Practices
• Familiar with BIM documentations and shop drawings directly from the models

Requirements

• Degree or Diploma in Electrical Engineering or its equivalent
• At least 2 years of experience.
• Able to read Building drawings, good in Autocad.
• Well-versed in building regulations and local design codes.
• Proficient in AutoCad drafting and Microsoft Office.
• 3D BIM Modelling in Autodesk
• Good interpersonal skill with the ability to connect with and influence stakeholders with different objectives
• Able to solve problems under pressure
• LTA Project References will be an added advantage

Responsibilities:

• Responsible for successful delivery of assigned projects.
• Manage the site project team and facilitate their ability to complete the project on time.
• Supervise workers and sub-contractors to ensure works are carried out as per schedule and in good quality.
• Project Management to achieve smooth project implementation and completion.
• Project Costing and re-engineering to increase project profit margin, preparation of monthly progress claim and expenditure budget control.
• Leading Testing and Commissioning of project team and conduct training to customers after completion of project.
• Provide technical support to customers and site project team in the selection of equipment for the project.
• Involve in technical discussion, progress meeting with client, M& E consultant and main or sub-contractors.
• Assist the Safety Coordinator / Safety Officer In charge of the Project Safety System planning, assessment and implementation.
• Performs other duties as assigned.

Requirements:

• Related Academic Achievements in Engineering (Electrical) or Building Services
• Min. 2 years relevant experience at local construction site.
• Strong project management experience in related Electrical Installation projects (especially on turnkey and A&A works) with strong technical knowledge and site experience.
• Able to communicate effectively with all levels of people and possess strong leadership quality and high initiative character.
• Able to communicate well in English and Mandarin.
• Proficiency in Microsoft Office and Project softwares including good knowledge in AutoCad/Revit
• Motivated, responsible with positive attitude and able to work under pressure and stress.
• This position requires the successful candidate to be onsite mostly.
• This position requires the successful candidate to work during after office hours sometimes due to project schedule.

Job Responsibilities:

• Produce shop drawings & as-built drawings using BIM modelling Creating & managing BIM model.
• Update and coordinate BIM model throughout the project.
• Perform interference/clash checking within own model and /or against other disciplines.
• To deliver all the drawings on time with accurate.
• All other Drafter related jobs.

Job Requirements:

• Diploma or Degree certificate in relevant discipline.
• Minimum of 3 year experience as BIM drafter in Singapore construction is required for this position.
• Candidate with PUB projects drafting experience will be an advant age.
• Must be proficient in BIM, Revit, Auto Cad & MS Office Able to interpret engineering drawings and models.

DUTIES AND RESPONSIBILITIES

The Engineering Manager reports to the Project Director and shall be responsible for the effective design effort and coordination of the Sub-Contractor's discipline engineering professionals. The Engineering Manager shall ensure that all designs comply with the requirements of the Work; that all Work is efficiently and effectively executed in accordance with the criteria, specifications and standards listed in the CONTRACT; and that the designs comply with safe and reasonable standards as accepted within the offshore oil and gas industry. The Engineering Manager shall be responsible for his/her scope of work as given below:

• Planning and scheduling the engineering execution work for the FPSO to meet the overall project schedule including what is required to be subcontracted and /or included in supplier’s scope.
• Ensure compliance to all codes and standards including regulatory requirement while the design and engineering is performed to ensure that project acceptance is not jeopardized due to errors and omissions in this respect.
• Ensuring that all engineering designs & drafting works, preparation of MTO's/BOM's and preparation of As Built drawings are carried out in accordance with the Project HSE and Quality policy.
• Planning and ensuring that suitably qualified and experienced engineering and drafting personnel are available in various engineering disciplines.
• Ensuring that all engineering design and drafting work are carried out in accordance with the applicable standards and codes including COMPANY standards, if any.
• Ensuring that all COMPANY requirements regarding engineering are addressed and corrective actions are taken if any.
• Ensuring that non-conformances to the HSE/Quality system are properly addressed and corrective actions are taken.
• Interpretation of various design drawings, COMPANY specifications, etc and preparation and timely completion of design tasks.
• Interfacing with COMPANY Site Representative on project engineering related matters through Project Director.
• Interfacing with, establishing and controlling various Subcontractors and their design, regularizing TQ’s/Site Instructions through drawing revisions, reviewing subcontractor’s shop drawing, etc. as appropriate.
• When needed, liaise with Classification Society/Certifying Authority on all aspects of design.
• Liaison with the CONTRACTOR representative and construction team regarding design issues and progress.
• In conjunction with the Project QA/QC Manager ensure COMPANY requirements and all technical aspects are addressed in the Inspection and Test Plan.
• Ensuring all design issues of available materials, transport requirements, regulations and constructability are carefully considered.
• Maintaining responsibility for design integrity for the project duration.
• Reporting weekly on progress of detailed design activities.
• Manage engineering man-hours, cost, change order request.
• Follow-up with subcontractors to ensure that all engineering documents are delivered as per schedule.
• Provide engineering support for fabrication and installation.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

REQUIREMENTS

• Minimum educational requirements of a Bachelors’ and/or Masters’ degree in Mechanical / Chemical Engineering or equivalent disciplines.
• Direct experience working on FPSO projects.
• Minimum 15-18 years’ experience, with Oil & Gas projects (fixed installations and FPSOs), with significant experience working as an engineering manager.
• Must have prior work experience with medium/ large sized brownfield and/or greenfield projects in the upstream Oil and Gas sector, in a similar role and possess a good understanding of project phases, milestones, deliverables, internal and external interfaces.
• Should have good interpersonal communication skills, structured but not rigid, should be able to take decisions and responsibility, pro-active and should possess good report writing skills.
• Good leadership skills to manage and develop a team.

About the job

Venture, a public listed company in SGX, is a leading global provider of technology services, products and solutions with established capabilities spanning marketing research, design, research and development. Over the years, Venture has built know-how and intellectual property with expertise in several technology domains. These include life science & genomics, molecular diagnostics, medical devices and equipment, healthcare and wellness technology, lifestyle consumer technology, health improvement products, instrumentation, test and measurement technology, networking and communications, fintech, as well as computing, printing and imaging technology.

Headquartered in Singapore, the Group comprises over 30 companies with global clusters in Southeast Asia, Northeast Asia, America and Europe, and employs over 12,000 people globally.

At Venture, our people are our most valuable asset. We are committed to unifying culture, encouraging innovation, and harnessing the collective strengths and synergies of our human capital to deliver compelling differentiation, advancing Venture’s position as a leading global provider of technology solutions, products and services.

We’re looking to add an Alliance Manager in Singapore. The position is based in our Univac Site at Woodlands.

As an Alliance Manager, you will:

Responsible for developing and managing strategic partnerships with external organizations. This role will require collaboration with cross-functional teams, including sales, marketing, product development, and legal, to drive joint initiatives that result in revenue growth and expanded market reach.

The key roles and responsibilities are as below:

• Identify and evaluate potential alliance partners that align with the company's strategic goals and objectives.
• Develop and maintain relationships with key stakeholders at partner organizations, including executive-level contacts, to drive successful collaborations.
• Negotiate partnership agreements and contracts that define the terms and scope of the alliance.
• Facilitate communication and collaboration between internal teams and external partners to execute joint initiatives.
• Track and report on the progress and success of partnerships, including metrics such as revenue growth, market share, and customer acquisition.
• Ensure compliance with legal and regulatory requirements related to partnerships.
• Continuously assess and improve partnership programs and processes to drive better outcomes and greater efficiencies.
• Keep abreast of industry trends, competitive landscape, and emerging technologies that may impact the company's partnerships.
• Participate in customers request for information (RFI), request for quote (RFQ), and request for proposal (RFP) activities.
• Work with internal and external parties to gather necessary information required for RFQ process and analyse the data to ensure accurate quotes are provided meeting company targets.

What skills and experiences are we looking for?

• Degree in Business Administration, Marketing, and/or any equivalent faculty.
• Minimum 5 years of experience in alliance management and business development.
• Demonstrated ability to establish and maintain successful partnerships with external organizations.
• Good negotiation and contract management skills.
• Excellent communication and interpersonal skills, with the ability to build rapport and influence at all levels of an organization.
• Analytical and strategic thinking skills, with the ability to identify and evaluate opportunities and make data-driven decisions.
• Knowledge of industry trends, competitive landscape, and emerging technologies.
• Experience working in a fast-paced, dynamic environment with competing priorities and deadlines.
• Ability to travel domestically and internationally as needed.

If you embody the spirit of excellence, passion for discovery, innovation and enterprise, and the desire to make a difference in the world of technology and electronics, come join the Venture team!

Be Part of the Venture Family.

---- Communication will be extended to candidates who have successfully advanced in the selection process ----

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 5 year(s) of M&E LTA working experience in the related field is required for this position.
• Familiar with construction site activities.
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

Key Responsibilities:

• Assist with recruitment efforts, including posting job openings, reviewing resumes, and scheduling interviews.

• Conduct reference checks and background screenings.

• Assist with onboarding new employees, including preparing offer letters, conducting orientation sessions, and creating employee files.

• Provide administrative support to the HR Manager, including managing calendars, scheduling meetings, and preparing reports.

• Assist with employee relations, including answering employee questions and escalating issues to the HR Manager as necessary.

• Manage employee data

• Assist with benefits administration, including enrollments and changes.

• Maintain HR files and documents, ensuring all paperwork is complete and accurate.

• Assist with HR projects as needed.

Requirements:

• 1-2 years of experience in an HR support role.

• Knowledge of HR laws and regulations.

• Excellent communication and interpersonal skills.

• Strong attention to detail.

• Ability to maintain confidentiality.

• Proficient in Microsoft Office.

• Ability to work independently and prioritize tasks.

• Strong organizational and time management skills.

• Ability to work in a fast-paced environment.

- Station on-site and perform daily inspection and preventive maintenance works in Mechanical and Electrical Systems according to Scheduled Maintenance

- Attend to feedback, Breakdown and customer service requests

- Attend to Fault-Calls and carry out rectification of Faults within specified time and budget

- Supervise and coordinate with contractors and vendors on works according to scheduled maintenance, repair, shut-down and overhaul works

- Assist Engineer/Manager to update records of Mechanical and Electrical system servicing reports and monitor the performance of the systems and equipment

(1) Experience in M&E QS scope of works and had participated in tender projects of more than $2 Mil

(2) Good Communication Skill and a Good Team Player

(3) At Least 7 years of experience in M&E field of works

(4) Resourceful and Outcome-based attitudes to explore any new arisings

(5) Experience in Project Tender Documentation and Submission requriement

(6) Require to attend Tender Site Show-arounds and Project Meetings with Project Director/Manager

* Managing the planning and design stages of construction projects.

* Contributing technical expertise to project drawings and designs.

* Performing cost calculations and preparing financial projections.

* Preparing work schedules in collaboration with the project manager.

* Liaising between contractors, subcontractors, vendors, and suppliers.

* Overseeing construction engineering processes.

* Performing regular tests on materials and procedures to ensure compliance with industry regulations.

* Ensuring that the construction project is completed on time and within budget.

* Documenting processes and keeping detailed construction logs.

* Presenting construction project progress updates to clients and senior managers.

* Managing the planning and design stages of construction projects.

* Contributing technical expertise to project drawings and designs.

* Performing cost calculations and preparing financial projections.

* Preparing work schedules in collaboration with the project manager.

* Liaising between contractors, subcontractors, vendors, and suppliers.

* Overseeing construction engineering processes.

* Performing regular tests on materials and procedures to ensure compliance with industry regulations.

* Ensuring that the construction project is completed on time and within budget.

* Documenting processes and keeping detailed construction logs.

* Presenting construction project progress updates to clients and senior managers.

~ Analyse risk management data.

~ Assess viability of workflow improvements.

~ Coordinate day-to-day fleet operational activities under supervision.

~ Maintain relationships with clients.

~ Manage compliance to risk management frameworks, policies and processes.

~ Manage information exchange between clients and business.

~ Manage issues arising from servicing client accounts.

~ Optimise utilisation of resources.

~ Oversee implementation of workflow improvements to improve efficiency.

• Update the records to process account payable and petty cash.
• Review AP aging, report of exception matter (if any).
• Reconcile vendors’ SOA to our accounting record (at least for major suppliers.
• Update records of account receivables.
• Prepare general ledger in time for audit schedule assigned.
• Small entities monthly and yearly closing.
• Handling the full set of accounts for small entities.
• Assist in preparation for GST return, corporate income tax return, ECI.
• Assist in quarterly or half yearly and financial year end stock take conducted by finance dept.
• Assist to prepare stock take variance report for superior to review.

~ Analyse risk management data.

~ Assess viability of workflow improvements.

~ Coordinate day-to-day fleet operational activities under supervision.

~ Maintain relationships with clients.

~ Manage compliance to risk management frameworks, policies and processes.

~ Manage information exchange between clients and business.

~ Manage issues arising from servicing client accounts.

~ Optimise utilisation of resources.

~ Oversee implementation of workflow improvements to improve efficiency.

~ Analyse risk management data.

~ Assess viability of workflow improvements.

~ Coordinate day-to-day fleet operational activities under supervision.

~ Maintain relationships with clients.

~ Manage compliance to risk management frameworks, policies and processes.

~ Manage information exchange between clients and business.

~ Manage issues arising from servicing client accounts.

~ Optimise utilisation of resources.

~ Oversee implementation of workflow improvements to improve efficiency.

Manage schedules and deadlines.

Recruit and train personnel and allocate responsibilities and office space

Monitor inventory of office supplies and the purchasing of new material with attention to budgetary constraints.

Monitor costs and expenses to assist in budget preparation.

Must be able to use a Quickbooks account.

Ability to computer Infornamatiomn design.

since it is a construction company,must also be able to understand construction work documents. Preparation of safety management documents, and other documents required for construction site sites.

Since it is a Korean company, you must be able to speak Korean and English.