MAIN TASK

1. To manage the Contract Management Division in SG/KSA
2. To review and provide contract advice and interpretation for all BUs whenever required

(A) CONTRACT MANAGEMENT

1. To provide support in all contract matters
2. To prepare a lookout list for distribution to project team and to conduct a training to project team at start of every new project to highlight interim notice, got process and its timeline of submission and all other necessary guidelines
3. To attend to project team's request to prepare correspondences regarding a) extension of time (EOT) & claim b) notices c) contractual advise.
4. To analyse company's position on every case and discuss w/ project team and/or management whenever necessary to finalise its strategy and approach
5. To provide contractual advise and interpretation when required (SG/TREL/TRELI)
6. To support BUs in highlighting critical requirement and any deviation in compliance with terms & conditions from pre-contract stage to project close-out
7. To assist BU/Dept in highlighting any deviation in the terms and conditions of contract
8. To provide support in all main contract matters (SG/THAI/SAUDI)

(B) DISPUTE

1. To study/investigate the dispute through discussions with internal parties, examination of project documents (i.e. letter by BU, client correspondences/letters, schedule and all relevant contract documents.)
2. Give contractual advise and path-forward for dispute resolution or defend company from claims
3. Draft letters and/or correspondences to protect the company's interest

(C) CONTRACT REVIEW

1. To attend to tender contract review requests by BDD and project team
2. To study and review the tender documents (i.e. main contract, general terms & condition, annexes) and prepare a Tender Lookout List to highlight any risk exposure
3. To reply to any tender clarification raised by client
4. To review and evaluate Rotary's partnership agreement to subcontractor including drafting of any agreement
5. Review and comment on tender analysis prepared by project stakeholders before it is presented to the client
6. To develop SOP guidelines and to provide guidance and trainings
7. Maintain a monitoring log for each request
8. To archive relevant documents from each request into the shared drives upon closure of the request

(D) TRAINING & ORIENTATION

1. To prepare training materials
2. To conduct training for BU's on contract management (guideline / improvement)
3. To oversee the orientation program of new staff(s) in the department

(E) ADMINISTRATIVE MANAGEMENT (DEPARTMENT)

1. Procurement Outlook - Prepare and develop the yearly presentation
2. Upkeep of IMS Forms/Procedures
3. To facilitate the yearly e-Vendor Code of Conduct Exercise
4. To facilitate the yearly Vendor Evaluation
5. CAPEX processing for department

AssItant Procurement Manager

Report to: General Manager

Salary Range: $3800 - $4800

Min Qualifications / Experience:

Diploma/Degree holder with 7-10 years of relevant experience

Job Skills Required:

Purchasing skills and well-versed with materials specifications

Responsible for/authorised to:

a) Responsible for the efficient management of Procurement Department and ensure all purchases are made at the best price and terms with the required quality.

b) Supervise a team of purchasing personnel.

c) Procurement planning and controls to ensure timely delivery of materials and services.

d) Review outstanding orders fortnightly.

e) Maintain a list of approved reliable vendors and subcontractors and evaluate their performance periodically.

f) To set up and maintain the catalogue library and price records.

g) Ensure proper control, issue and implementation of Procurement procedures.

h) Check all Purchase Orders worksheets before issuance of official Purchase Order.

i) Verify and approve Purchase Order before joint submission to General Manager for approval.

j) To arrange for sub-contracting and purchasing committee with the relevant department representatives to evaluate and select contractors and suppliers.

k) Maintain and update price records for quotations for tender purpose.

l) Monitor and update overseas materials status.

m) Broaden the supplier base and continuous qualification / auditing of new sources of vendors and subcontractors.

n) Any adhoc assignments given by General Manager.

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• Minimum 5 years of engineering experience with recognized Degree in relevant field, and at least 3 years of supervision experience of E&M work in construction site for projects of similar and complexity.
• Strong analytical and problem-solving skills.
• Good communication and interpersonal skills.

Job Responsibilities

• Liaise with construction team to prepare document for Request for Quotation (RFQ) or Open Tender.
• Source potential tenderers/subcontractors and send out invitation for RFQs.
• Coordinate queries and clarifications between tenderers and construction team during RFQ stage.
• Coordinate post-tender interviews between tenderers, construction team, QS team and contracts team.
• Assist QS manager and contracts manager with quantity surveying matters relevant to Sub-Contract, Works Order and Purchase Order.
• Assist contracts team in administration of subcontracts.
• Handle payment request received from subcontractors and suppliers.
• Any other adhoc tasks assigned by QS Manager / Contracts Manager

Job Requirements:.

• Diploma or Degree in Quantity Survey, Purchasing/Procurement, Business, Engineering.
• 5 years’ experience in quantity surveying and sub-contract administration of Construction Project.
• Possess the relevant tertiary qualifications in Quantity Surveying, Engineering, or Contract/Construction Law.
• Experience with large-scale process related construction project is preferable.

Job Overview:

The incumbent will play a pivotal role in leading our local multi-disciplinary engineering team to achieve corporate and project goals. You will serve as the technical expert and leader, ensuring adherence to engineering standards, workflow SOPs, and HSE policies. Responsibilities include supervising, coaching, and mentoring team members, resolving technical issues, and overseeing project documentation to corporate standards.

ESSENTIAL DUTIES & RESPONSIBILITIES:

• Lead Gradiant International Holdings local multi-disciplinary engineering team to deliver on both corporate and project goals and objectives and ensure all engineering documents and deliverables are prepared accurately and per required schedule
• Serve as the engineering leader and technical expert
• Steward Gradiant Engineering standards, workflow SOP's, and HSE policies
• Supervise, coach and mentor team members daily.
• Answer questions and resolve issues brought forth by the engineering team members
• Create detailed engineering plans, prioritize and assign tasks and deadlines to team members
• Propose and oversee budgets and schedules for engineering projects
• Check and confirm the accuracy of the work performed and methods used by engineering staff
• Monitor and determine various staffing and training needs
• Work closely with Gradiant NPI (R&D) to understand Gradiant's suite of proprietary technologies and transition to commercial applications
• Work with NPI to understand project specific Heat & Mass Balance and translate to create system PFD's
• Identify and create project documentation including P&ID, General Arrangement, Manufacturing drawings, Specifications, Material Requisitions, BOM and Equipment Operation Manuals to corporate standards
• Size and selection of system components including but not limited to Heat Exchangers, Boilers, pumps, blowers, flow pressure and temperature instrumentation
• Support engineering, project management and deployment groups to identify and resolve technical issues.
• Provide technical direction as required.
• Be able to work through problems from a technical and practical prospective, while maintaining cost controls.
• Work with outside vendors and purchasing to select and establish equipment component specifications, material take-offs, requisitions and vendor orders while coordinating cost control, project schedule and manufacturing efforts.
• Have the ability to work independently and in an interdisciplinary team environment to perform all duties in a professional and timely manner.
• Have good organizational and communication skills
• Support Gradiant Subsidiaries across the globe as required

SKILLS/EXPERIENCE/EDUCATION REQUIRED:

• Bachelor’s /master’s degree in mechanical engineering or chemical engineering, or other related disciplines plus 15 years' experience in Engineering, Construction, design, or related discipline
• Familiar and experience with various water and wastewater technologies & EPC projects.
• Proficient in Microsoft Office Suite
• Excellent analytical thinking, interpersonal/communication skills, writing and problem-solving capacities.
• Reliable, well-organized and detail oriented
• Applicants must be willing to travel as and when required.
• Strong communication skills to convey ideas and technical information effectively with team and customers.
• Excellent customer orientation, willingness to deal with people, be flexible and be able to meet customer demands.

Roles & Responsibilities

Job Description:

We are looking for a detail-oriented and organized Account Assistant to join our team. The Account Assistant will be responsible for providing support to the accounting team, processing transactions, reconciling accounts, and assisting with financial reporting.

Responsibilities:

· Assist with processing accounts payable and receivable transactions.

· Reconcile bank and credit card statements on a monthly basis.

· Prepare and submit invoices to clients and follow up on outstanding payments.

· Maintain accurate and up-to-date records of financial transactions and documentation.

· Assist with financial reporting, including balance sheets, income statements, and cash flow statements.

· Perform other general accounting duties as assigned by the accounting team.

· Respond to accounting-related inquiries from internal and external stakeholders.

Requirements:

· Bachelor's degree in accounting, finance, or related field.

· Minimum 1-2 years of experience in an accounting or finance role.

· Knowledge of accounting principles and procedures.

· Proficiency in Microsoft Excel and other accounting software.

· Strong attention to detail and accuracy.

· Good communication and interpersonal skills.

· Ability to work independently as well as in a team environment.

· Willingness to learn and grow within the accounting team.

If you are a motivated and reliable Account Assistant with a passion for accounting and finance, we encourage you to apply for this exciting opportunity.

Job Responsibilities

• Deliver equipments /materials
• Fetch and send employees/workers
• Dispatch duties
• Other ad hoc duties as required

Job Requirements

• Possess at least 1 year of relevant working experience
• Class 3 / 4 driving license
• Positive attitude and able to work in fast paced working environment
• Able to communicate in basic English
• Able to handle heavy weight items / equipments

Be a part of our diverse family at Hai Leck, embracing each other as you discover your unique career potential and find your perfect fit with us. We are committed to unlocking your potential and guiding you to success. Our employees are valued down to their skills, and we are committed to training them and expanding their knowledge.

We would be pleased to welcome you at our family in Hai Leck if you are a suitable member.

Email us at [email protected] now!

Job Responsibilities

• Managing of daily store operation
• Maintain accurate inventory control records and ensure efficient storing and distributing of Inventory
• Coordinates daily activities on receiving and dispatch of goods
• Conduct daily housekeeping to ensure store is neat, tidy and clean
• Identify areas of improvement and establish innovative solutions
• Measure and report the effectiveness of warehousing activities
• Any ad-hoc duties as assigned

Job Requirements

• GCE ‘O’ level, NITEC or Certificate / Diploma in Logistic, Supply Chain Management or any related field
• At least 2 years of Warehouse & Logistics operation experience
• Strong working knowledge of warehouse operations and management
• Self-motivated and energetic
• Strong communication and interpersonal skills

Be a part of our diverse family at Hai Leck, embracing each other as you discover your unique career potential and find your perfect fit with us. We are committed to unlocking your potential and guiding you to success. Our employees are valued down to their skills, and we are committed to training them and expanding their knowledge.

We would be pleased to welcome you at our family in Hai Leck if you are a suitable member.

Email us at [email protected] now!

• To source potential suppliers in line with specification/Sending RFQ's
• To evaluate and update new/existing vendors into Approved Vendor List
• To coordinate with Project Team and Suppliers for any technical clarification
• To perform negotiations with short listed supplier(s) to the lowest best price with timely delivery.
• To ensure the appropriate terms and conditions are specified on the purchase order
• To prepare Bidtabs for Approval
• To prepare Purchaser's Terms & Conditions for purchases more than SGD 150K
• To coordinate with Project Team for any urgent purchase
• To arrange Training (Introduction & Product Presentation from Vendors)
• To process order and ensure timely delivery from the vendor
• To coordinate with Material/Logistic Controllers for GR/GI issues, if required
• To assist Finance for invoices with issues
• To assist in expediting for deliveries if required
• To send Approved Purchase Order to Vendor
• To coordinate with Vendor for any return or replacement of defective materials
• Issue PO if necessary
• To update and report to Supervisor on the above

All HR & Admin personnels have a shared responsibility to support the business in overall management of HR services, Project Administration & General Administration.

HR Policies, Technology & Analytics

· Taskhub- Synergix (Blue Collar)

· Infotech (White Collar)

· All medical networks (PCP, Raffles, Healthway Medical, MHC etc)

HR & Admin -Focused Areas

· MOM Work Pass Applications & Renewals

· Upkeeping Personnel Documentation, Passport Renewals

· Levy Waiver Management (R1, R2)

• Dormitory & Drivers route Management
• Timesheet Management & Payroll documentation Support
• Full Onboarding & Repatriation procedures
• Security Bond, Casino Exclusion
• Insurance & WICA
• Total Work Life Cycle, Svc Duration, Max Age
• Manpower Allocation, Deployment, Transfer
• Performance Management - Workers Appraisal
• Monthly Reports

Learning & Development

· Statutory Training & re-certification (Blue Collar & White Collar)

· Upskilling & Refresher

· Basic Skills SEK/SECK – Construction Entry Requirement

Team’s Shared Responsibility

· Corporate Website

· Review of new systems

· HR Policies, Forms & Templates

· ISO Procedures, Audit & Documentation

· SOP & Workflow

· Recruitment

· Building & Asset Management

· Vehicle Management (Inspection, Renewals, Road Tax, Repairs)

· Project Summary, Milestones, Track Records

· Technical Library

· Pantry & Conference Room

· Events Management, Recreation Room

· General Safety, First Aid

• To source potential suppliers in line with specification/Sending RFQ's
• To evaluate and update new/existing vendors into Approved Vendor List
• To coordinate with Project Team and Suppliers for any technical clarification
• To perform negotiations with short listed supplier(s) to the lowest best price with timely delivery.
• To ensure the appropriate terms and conditions are specified on the purchase order
• To prepare Bidtabs for Approval
• To prepare Purchaser's Terms & Conditions for purchases more than SGD 150K
• To coordinate with Project Team for any urgent purchase
• To arrange Training (Introduction & Product Presentation from Vendors)
• To process order and ensure timely delivery from the vendor
• To coordinate with Material/Logistic Controllers for GR/GI issues, if required
• To assist Finance for invoices with issues
• To assist in expediting for deliveries if required
• To send Approved Purchase Order to Vendor
• To coordinate with Vendor for any return or replacement of defective materials
• Issue PO if necessary
• To update and report to Supervisor on the above

Responsibilities:·

Prepare tender quotations including taking-off, materials /subcontractors outsourcing and costing· Liaise and establish good rapport with consultants, quantity surveyors, architects, developers and contractors on certification of claims for payments·

Analysis of costs in preparation of tender BQ·

To assess and identify variation order (VO) work for all subcontract packages·

To provide support in terms of measurement and pricing on the Mechanical/ Electrical contract’ VO claim· To process monthly progress claim and final claim·

To attend to all relevant contracts administration and documentation for the project· To take off measurement: re-measurement for sub-contract·

To work out cost estimation or budgetary cost on Mechanical Electrical services.

To liaise with suppliers for quotations

To maintain relevant documentation in orderly and proper mannerRequirements:· Possess Professional Certificate/NITEC/Diploma/Degree in Quantity Surveying / Electrical / Mechanical Engineering

Minimum 2 years of working experience in M&E construction industry not limited to shopping complexes, hotels, condominiums, office building, etc.· Analytical, resourceful, independent, responsibility and able to work in a challenging and fast paced environment

Good Interpersonal, communication and negotiation skills· Computer literacy in MS office· Ability to work in a team, must be able to work overtime and o meet deadline for submission.· Resume to include a recent photograph of the applicant.

Salary shall be commensurate with experience. Candidates are requested to indicate the level of remuneration desired.

Job Duties & Responsibilities:-

- Overseeing the procurement of materials.

- Coordinating with the various clients , consultants, main-contractors , architects, sub contractors and specialist to ensure the smooth and timely execution of the project deliverables.

- Ensuring that all works are carried out in accordance with the project specifications.

- Ensuring that all works are carried out within the project budget given.

- Overseeing the various design elements of the project.

- Providing timely submissions for cash flow and progress claims.

- Procurement of materials and ensuring the timely delivery of the materials as per site requirement.

- Ensuring that all team members can deliver their daily works and that the team meets the project requirements.

- Monitoring and improving of overall project progress to meet critical milestone dates.

- Submission of monthly / weekly progress and safety reports.

- Reporting of all project matters to the management.

- Preparing and presenting of consolidated contractual claims to the client representives.

- Any other works/tasks given by the Management for the completion of the project and other Ad-hoc assignments.

Work location : at site

Mon-Fri : 08:30am - 5.30pm, Sat : 8.30am - 12.30pm (Alternate Sat)

Salary shall be commensurate with experience .

Candidates are requested to indicate the level of remuneration desired.

The Centre for Urban Solutions is to provide leadership in developing innovative solutions and sustainable technologies for space creation and urban infrastructure development.

The School of Civil and Environmental Engineering (CEE) at Nanyang Technological University is a leading school for Sustainable Built Environment. It has over 60 faculty members and more than 1,500 students and is rapidly expanding its range of education and research activities.

CEE is inviting applications for the position of Research Associate for a research project.

Key Responsibilities:

• To be involved in a research project related to geophysics, geotechnical engineering, and geoenvironmental engineering.
• Familiar with data analysis and data fusion related to geophysical, geotechnical and geoenvironmental fields including shear-wave velocity, physical and mechanical behaviours of mixed waste materials, and chemical characterization of mixed waste materials, etc.
• Perform independent and collaborative research to meet the project objectives.
• Develop new solutions.
• Seek funding for new research directions.
• Publish high-quality journal papers to promote the international reputation of the Centre and the University.

Job Requirements:

• A Master Degree in Civil Engineering, Geotechnical Engineering, Geophysics, or equivalent from a recognised university.
• Have good knowledge in Geophysics, Geotechnical Engineering and Geoenvironmental engineering.
• Good verbal and written communication in English.
• Working or research experience of at least 1 year is desirable.

We regret that only shortlisted candidates will be notified.

• Implement daily electrical / mechanical inspections and records,
• Ensure equipment compliance with QHSE legal requirements
• Implement Preventive Maintenance plan till completion.
• Complete mechanical repair timely according to site procedures and production priorities
• Analyse the equipment breakdown root causes analysis and corrective actions
• Ensure to maintain updated documentation (procedures, plans, work orders, permit to work, Lock-Out-Tag-Out, Risk Assessment and P&ID).
• Responsible for external electromechanical / construction contractors who work in the plant
• Ensure safe coordination and execution of all preventive maintenance or corrective activities performed by external contractor strictly following QHSE guideline and policies.
• Review and update maintenance records in compliance with Client requirements.
• Ensure mechanical P&IDs, as built drawings and technical documentations are systematically and periodically updated.
• Participate in CAPEX project related activities and coordinate electromechanical related works with appointed contractors.
• Working experience in ultilizing Computer Maintenance Management System.
• Prepare , Implement & Adhere to Management of Change procedure.
• Participate in the setup of maintenance system
• Manage the inventory of spare parts and tools for cost optimization.
• Coordinate and execute OPEX and CAPEX expenditure timely.
• Maintain a clean work environment for 5S compliance and best practices.
• Achieve Health, Safety & Environment and Quality standards (e.g.: ISO) and manage associated risks.
• Contribute towards the site's achievement of Health, Safety & Environment and Quality standards including ISOs. This involves a sound understanding of the QHSE Management systems.

Demonstrate commitment towards QHSE through careful and consistent application of (Client) codes of practice and procedures, and maintaining of auditable records for the engineering function

• Manage the inventory of spare parts and tools for cost optimization.
• Coordinate and execute OPEX and CAPEX expenditure timely.
• Maintain a clean work environment for 5S compliance and best practices.
• Achieve Syngenta Health, Safety & Environment and Quality standards (e.g.: ISO) and manage associated risks.
• Contribute towards the site's achievement of Health, Safety & Environment and Quality standards including ISOs. This involves a sound understanding of the QHSE Management systems.

Demonstrate commitment towards QHSE through careful and consistent application of (Client) codes of practice and procedures, and maintaining of auditable records for the engineering function

Responsibilities:

• Responsible for day to day on-site project supervision and ensure assigned jobs are carried out effectively and productively in order to meet customer specifications, requirements and deadline.
• To ensure the safety regulations and requirements are being complied on site
• To organize, co-ordinate, control and lead to ensure that all lifting activities are carried out safely and in-line with the quality requirement within the specified schedule on site
• Manage and direct the department prior to the scheduled non-routine and routine duties
• Attend all daily overtime, works and other production meetings upon assigned
• Identify training needs of his team
• Controlling of budget which includes man hours
• Prepare and lead in Kaizen Improvement projects
• Evaluate and assess the work performance of staff

Requirements:

• NTC or Diploma in Mechanical Engineering
• Possess 2 years of relevant experience in marine or heavy industries
• Able to read and interpret both general and complex lifting plans
• Possess basic knowledge on budgetting for works
• Able to use Microsoft Excel for basic planning and reporting purpose
• Able to work at heights and under outdoor conditions

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

HR & ADMIN MANAGER

(Salary range: S$4,500 - $5,500)

WHAT YOU DO

• Support the full spectrum of Human Resource functions which includes recruitment and selection, employee relations, payroll management, insurance renewals, training and development
• Responsible for the full payroll functions
• Well versed with WPOL and EPOL applications and guidelines
• Hands on experience handling work injury and insurance claims
• Execute HR operational functions related to employees' data management, leave administration, employee benefits administration, medical claims, work pass applications, etc.
• Review policies and process flows
• Develop an internal work plan to ensure deliverables and timelines are met
• Ensure the organization is in compliance with MOM statutory requirements
• Promote staff awareness of workplace safety and health, communicate and educate staff on the Workplace Safety Act together with the Workplace Safety Consultant
• Manage and supervise the Office Admin Function (such as office rental, office workspace allocation, wellness program, staff pass, stationeries, pantry, etc)

WHAT YOU NEED TO HAVE

• Minimum Diploma in Human Resource Management
• At least 3-5 years of relevant experience (specifically in HR Governance, people risk management, HR budgeting, and Office Administration), with at least 3-5 years in a people management role
• Well versed and knowledgeable in HRIS System, preferably CuteOffice
• Experience in rolling out HRIS implementation projects within organization
• Good knowledge of employment laws and regulations
• A strong communicator with excellent interpersonal and influencing skills
• Resourceful, independent, meticulous with a strong desire to learn, and be able to work in an agile environment
• Able to work independently with integrity under minimal supervision and collaboratively within and across teams
• Preferably able to commence work at short notice

Interested applicants, please email your interest to: [email protected]

SENIOR/HR & ADMIN EXECUTIVE

(Salary range: S$3,000 - $3,800)

WHAT YOU DO

HR FUNCTIONS

• Assist the HR & Admin Manager in handling full spectrum of HR functions - recruitment, selection & employment, all Work Pass matters.
• Responsible for the full payroll functions in consultation with HR & Admin Manager
• Maintain, upkeep and ensure timely and accurate update of HR database, all employee personal files records are complete and treated in strictest confidence
• Assist the HR & Admin Manager in reviewing training plans and career development for staff.
• Responsible to manage and update Time Attendance for payroll processing
• Assist the HR & Admin Manager in handling company insurances claims and reviews (Group Medical, Workmen Injury Compensation, Vehicle Insurance)
• Prepare submissions to government agencies, such as IRAS, NS claims, Government Paid leave claims and etc

ADMIN FUNCTIONS

• Lead HR Admin team, manage and improve the work flow to give strong support to operations and finance department
• Assist the HR & Admin Manager with vendor management and government grant applications
• Acquire and maintain office furnishing, equipment, and supplies eg. Stationery, photocopiers
• Maintain company assets such as desktops and laptops with help from IT outsourcing vendors
• Ensure that office and pantry is well-maintained, organized and secure.

WHAT YOU NEED TO HAVE

• At least 2 to 3 years of relevant work experience in a similar role.
• Candidates with more years of experience will be considered for the Senior executive role
• Candidates with minimum GCE O level plus Certificate in Human Resource Management & above will have an advantage
• Well versed and knowledgeable in WPOL and EPOL applications and processes
• Familiar with HRIS & Payroll systems, preferably CuteOffice
• Good knowledge of employment laws and regulations
• Good communication and organization skills
• Enthusiastic, positive and resourceful
• Able to multi-task, organize, and prioritize work
• Proactive and initiative
• Preferably able to commence work at short notice

Interested applicants, please email your interest to: [email protected]

Supervise workers and subcontractors to maintain schedule adherence and uphold work quality. Provide on-site technical support throughout various project stages, including execution, site meetings, testing, and handover, to ensure progress aligns with the schedule.

The Foreman is responsible for scheduling, co-ordinating and supervising the work of all site operatives, ensuring that all work is delivered safely on time and within budget along with managing equipment and materials required

A crew foreman coordinates the daily activities in a construction site to ensure that operations adhere to deadlines, budgets, and quality standards. They serve as the point of contact for supervisors, clients, and construction workers.

With experience and proven success, construction foremen can progress to more senior roles or even executive-level positions, such as director of property management or contract project manager

General Function/ Job Duties:

Corporate Operations management

1. Drive the activities for strategic growth opportunities internationally.

2. Evaluate Operations development opportunities with all entities/sites for strategic plans alignment with corporate strategy to increase manufacturing/service and products offerings that are complimentary to the status of company.

3. Responsible for the operations objective and profit plans.

4. Plan the performance in all of the areas: Manufacturing/production, Engineering, Quality departments.

5. Drive a dynamic production force with excellent tactical production objective to develop the delivery for Operations results.

Corporate Engineering / Production

6. Formulate and provide directives for Engineering / Production Department in meeting organization’s goals.

7. Accountable with the assigned factory sections in terms of New Model Development.

8. Analyse section profit / loss of projects and providing cost control and cost effectiveness strategy.

9. Involvement with evaluation, recommendation and also as a decision maker for newly factory, machineries, tooling that relate to the machining setup and processes.

10. Ensure effective control of machine up / down time and well scheduled & optimized machine performance and capacity.

11. Manpower balancing and deployment strategy with manpower skill set.

12. Continuous improvement program to ensure productivity, cost and quality effectiveness.

13. Provide application support query on process time estimation and special / engineering needs on sales quotation.

14. Formulate and provide system in document control of engineering / technical / ECN drawings / forms and operational support programs.

15. Formulate, identify and conduct management / training workshop to initiate / facilitate staff in aligning organizations missions and objectives and actions plans.

16. Review / prepare, administer and implement Process Manufacturing Plan and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.

17. Ensure the proper implementation of machine maintenance and control of tooling.

18. Ensure and coordinate the implementation of risk assessment and risk control of medical devices.

19. To maintain good house-keeping - 6S and ensure all Engineering practices are in accordance to A & One Precision best practices and other practices which the Company may introduce from time to time.

20. To maintain good workplace health and safety rules and regulations compliances at all time in workplace.

Corporate Quality

21. Manage, build and maintained a strong team of leaders of positive skills, analytical and with good manufacturing acumen combined with high level of competency to deliverable results.

22. Direct and lead the operational quality and organizational stability through development and improvement of standards, controls, systems process and procedure.

23. Lead the production activities on a safe, smooth and efficient operation, operating in compliance with all areas of WHSE which include risk management to all entities/sites in accordance to A & One Precision best practices and other practices which the Company may introduce from time to time.

Corporate Administration /Others

24. Influence team across level to negotiate effectively for success in each team role.

25. Built a team of strongly involved people with good leadership skill, ability to communicate clearly and with compelling vision for the Company’s future.

26. Establish and direct all entities/sites plant policies and procedure.

27. Confer with department heads to ensure coordination of purchasing, production and shipping for product quality control for all entities/sites.

Job Description:

- Setting up, maintaining and regular lubrication of machines.

- Run production to produce required output.

- Carry out effective in – process inspection

- Carry out adjustment of tooling and change of worn out tooling.

- Trouble shooting of production problem.

- Daily housekeeping.

- Training of operators & new staff

Job Requirements:

- Nitec in mechanical or electrical background preferred

- Able to comply to safety procedures.

-Must be able to lift heavy objects

- Able to commit to work shift work

Job Responsibilites:

• Requisition fulfilment for raw materials, workshop tools and office supplies
• Generate purchase orders, oversea delivery schedules and maintain purchase records
• Manage suppliers, resolve discrepancies or quality issues on purchases
• Inventory management with workshop/storeman

Job Requirement:

• NTC/ Diploma preferably in Mechanical/Precision engineering
• Min. 2 years of experience preferably in Oil & Gas/engineering
• Excellent communication, negotiation and interpersonal skills
• Proficient in Microsoft Excel, SAP knowledge will be an added advantage

Job Responsibilites:

• Requisition fulfilment for raw materials, workshop tools and office supplies
• Generate purchase orders, oversea delivery schedules and maintain purchase records
• Manage suppliers, resolve discrepancies or quality issues on purchases
• Inventory management with workshop/storeman

Job Requirement:

• NTC/ Diploma preferably in Mechanical/Precision engineering
• Min. 2 years of experience preferably in Oil & Gas/engineering
• Excellent communication, negotiation and interpersonal skills
• Proficient in Microsoft Excel, SAP knowledge will be an added advantage

Job Description

• Modification, testing and commissioning of main switchbords (MV, LV), MCCs & control panels
• Repair, test and prepare of report for circuit breakers (GE Power Break, Merlin Gerlin, Schneider & ABB)
• Design, install, test and fabricate of starters and control panels
• Generators protective relay testing (Basler, GE, Deif)
• Current Transformer Testing
• Surge test, Hi-pot & Polarity Index Test, function test and load test for generators, motors & transformers
• Repair and troubleshoot for AVR and Main Switchboard Control System
• Design, test and commission of generator, protective relay, synchronization, load sharing, parallel operation of generators, main switchboard function test for survey approval
• Design and fabricate of variable AC or DC Speed Drives Control Systems
• Design, troubleshoot, install and commission of AC drives up to 690V, 1000KW
• Troubleshoot, install and commission of drilling SCR System and AC generator control system

Requirement

• Diploma/Degree in Electrical/Power/Marine/Industrial/Mechanical Engineering or equivalent
• 5 years of experience
• Offshore electrical Installation and instrumentation experience preferred
• Experience in marine equipment control and systems integration preferred
• Experience in testing and commissioning of switchboards, power management, transformer and other electrical equipment preferred
• Competency in automation design of control system (Hardware & Software) for VFD drive, PLC system, HMI system utility power system
• Knowledge of AC/DC motors, computer-based system and generator
• Able to travel overseas onboard vessels when required

The Cloud Application and Platform Group (CAP) Group from Nanyang Technological University, Singapore, is seeking 1 motivated research fellow in the topic of “Digital Twin for Advanced Battery Analytics”.

Key Responsibilities:

• Developing physics-based and data-driven models to characterize battery electrochemical process;
• Supervising junior graduate students;
• Writing technical reports, including papers, patents and technical disclosures;
• Working closely with team members/engineers and assist in developing new features;
• Ensuring responsiveness of applications;
• Assisting in the expansion of research output through increased paper publication;
• Diagnosing the issue and resolving it on demand.

Job Requirements:

• PhD Degree in Computer Science, Computer Engineering, Electrical Engineering, Information System or a related discipline;
• Strong research record, preferably on top-tier computer science/engineering conferences;
• Proficiency with Python and relevant packages, like NumPy, Pandas, PyTorch or Tensorflow;
• Excellent verbal communication skills and good problem solving skills;
• Attention to detail.
• Fluent spoken and written English.

We regret that only shortlisted candidates will be notified.