a) Possess experience in electrical maintenance and project works in the Construction or Oil and Gas industry of which at least 5 years as Supervisor.

b) Educational qualifications: NITEC competency or above.

c) Candidate is expected to be well-versed in the proposals and tendering as well as in planning, execution, reporting, inspection, and monitoring of Subcontractors.

d) Be able to prepare and review electrical diagrams and layouts.

e) Experience in the installation, calibration, testing, and commissioning.

f) Good analytical skills with all-round experience and ability to lead a project independently.

g) Knowledge of cable design, cable materials used, and its handling requirements.

h) Must have a good skill for managing a maintenance organization even during emergencies.

i) Work and plan independently with minimum supervision to rectify any electrical-related failure reported.

j) Ability to carry out pre-commissioning and functional testing on new installations

k) Ability to use all test equipment as required carrying out maintenance and faulting finding works.

l) Responsible for ensuring any changes to Instrument configuration and drawings are recorded as part of the MOC procedure.

m) Responsible of to carry out toolbox talks to the technicians.

n) Able to close any gaps arising from QA/QC/HSE compliance audits.

o) Perform Risk Assessment for the work activities in coordination and develop JSA/ JHA of engineering tasks as required.

Astek is proposing an opportunity for Data Engineer (Snowflake/Python) to support our project based in Singapore.

Responsibilities

• Develop data set processes for data modeling, mining, and production.
• Provide BAU support for production job monitoring, issue resolution, bug fixes.
• Collaborate with data architects, modelers, and IT team members on project goals.
• Responsible for requirement gathering, design and development, SIT testing, support UAT and CICD deployment for enhancement and new ingestion pipeline.
• Design, construct, install, test, and maintain highly scalable data management systems, ensuring systems meet business requirements and industry practices.
• Integrate new data management technologies and software engineering tools into existing structures.

Requirements

• Degree in Computer Science/Information Technology or related fields.
• At least 3 years of hands on working experience in building data ingestion pipelines using Python on Snowflake.
• Proficient in Software Development Life Cycle (SDLC) methodology.
• Strong experience in Continuously integrates and deploys data solutions via CI/CD.
• Experience in data warehousing concepts.
• Able to design and implement solution and perform code review.
• Excellent Communication Skills, Verbal and Written, for both internal and external team members.
• Strong problem solving and troubleshooting skills.

Job Description:

· Perform design, testing and commissioning of Integrated Supervisory Control & Data Acquisition System ( ISCS ) for MRT projects in one or

more of the following areas:

- SCADA for Power, Environment Control and Fire Protection Systems

- ISCS applications for Radio, CCTV, PA, STIS, ATS, Trains, etc.

· Prepare Equipment Cabinet Design document

· Prepare Equipment Cabinet Integration Manufacturing document

· Supervise Equipment cabinet manufacturing activities

· Responsible for integration of both hardware & software work as well as implementation

· Prepare project documentation including design, test plans/procedures, O&M / training manuals, etc.

· Manage interfaces and co-ordination with external system suppliers and client

Requirements:

· Diploma/Degree in Electrical / Electronics / Computer Engineering

· Excellent working knowledge of SCADA software package on Unix/Linux and Windows platforms

· Experience in working with PLC / RTU and SCADA software package

· Knowledge in operating systems such as Windows, Solaris/Linux, HW interfaces, interface protocol design (TCP/IP, RS422, etc) will be an advantage

· Knowledge in network analysis/management, network switches/routers setup and configuration

· 1 - 3 years’ experience in the design and implementation of Supervisory Control & Data Acquisition Systems (SCADA)

Please submit resumes to [email protected] with the following

details in MS Word format:

- Position applying for
- Current remuneration
- Expected remuneration
- Notice period

John Goh Meng Chye

EA License No : 06C4642
EA Reg No : R1102621

Headquartered in Singapore, Actxa Pte Ltd is a deep tech company founded in 2015 that leverages artificial intelligence to create next generation preventive healthcare solutions.

We create evidence-based, personalised health insights in the domains of physical activities, sleep quality, body composition, stress and recovery, heart health and blood glucose evaluation and monitoring.

To improve population health, Actxa establishes worldwide partnerships and research collaborations to develop critical preventive health models to help people avert chronic diseases such as diabetes and hypertension.

We are searching for our next team members to join our growing team.

More information about us: https://www.actxa.com

Actxa is hiring for Technical Sales Support Engineer

Internal Code: AX24001

We are seeking a passionate Technical Sales Support Engineer plays a crucial role in bridging the gap between the technical aspects of a product or service and the sales team.

A Technical Sales Support Engineer is essential for ensuring that sales teams can effectively communicate the technical aspects of a product or service, ultimately leading to successful sales and satisfied customers.

They assist sales professionals in understanding and effectively communicating the technical features, benefits, and capabilities of a product or solution to potential clients.

This position requires a strong technical background, excellent communication skills, and a deep understanding of the product or service being sold.

1. Product Knowledge:

• Develop an in-depth understanding of the company's products or services, including their features, functionality, and technical specifications.
• Stay up-to-date with product updates and changes.

2. Pre-sales and Post Technical Support:

• Collaborate with the sales team to understand customer requirements and challenges.
• Prepare and deliver technical presentations and solutions to potential customers.
• Provide pre-sales technical support by answering customer queries, addressing concerns, and conducting product demonstrations.
• Responsible for the transition from the sales phase to the implementation phase and product launch by working closely with clients and internal teams.
• Troubleshoot technical issues or challenges that may arise during the integration process and work to find solutions.
• Address technical post-sales inquiries and issues to ensure customer satisfaction.
• Handle Level 2 support tickets of Actxa products.

3. Proposal Development:

• Collaborate with the sales, product and platform teams to create technical proposals, including pricing, configurations, and technical documentation.
• Ensure that proposals align with the customer's technical requirements.

4. Technical Expertise:

• Offer technical expertise to the sales team to help them address customer objections and concerns effectively.
• Act as a technical resource during the sales process to build credibility and trust with potential clients.
• Provide technical training to customers and sales team members to enhance their product knowledge and sales effectiveness.

5. Competitive Analysis:

• Stay informed about competitor products and services, and provide insights to the sales team regarding competitive advantages and disadvantages.

6. Documentation:

• Create, maintain and update technical documentation, user guides, product manuals, datasheets, and case studies, to aid in the sales process.

7. Customer Relationship Building:

• Build and maintain relationships with key customers to enhance trust and loyalty.
• Collect feedback from the sales team regarding customer experiences and technical challenges and provide this feedback to the product development team for continuous improvement.

Requirements

• Diploma or Bachelor's degree in Information Technology, Computer Science, Computer Engineering, Electrical & Electronics Engineering, or related discipline.
• At least 2 to 4 years in technical sales and support from industries like, digital health, connected devices, software/cloud services, information technology, or similar industries.
• Keen interest in digital healthcare, AI in healthcare, preventive health and wellness, and sports science domains.
• Excellent communication and presentation skills with good interpersonal and relationship-building skills.
• Sales acumen and customer-oriented mindset.
• Ability to problem-solve and can be very resourceful.
• A natural tenacity, resilience and determination
• Travelling is required for this role.

Benefits

What do we offer?

• Fun working environment
• Flexi benefits
• Employee Wellness Program

Actxa Pte Ltd is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Actxa Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Actxa Pte Ltd.

Your personal data will be processed for the purposes of managing Actxa Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice ( https://www.actxa.com/privacy-policy ) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Apply for this job

Key Responsibilities:

• Responsible for generating scripts and templates required for the automatic provisioning of resources
• Discover standard cloud services offerings, install, and execute processes and standards for optimal use of cloud service provider offerings.
• Build scripts to integrate with the organization’s systems as a service offering.
• Stay well-informed of failures and complications related to a cloud offering.
• Responsible for debugging technical issues inside a complex stack involving virtualization, containers, microservices, etc.
• Manage a complex cloud environment in accordance with company security guidelines

Requirements:

• Mandatory - having expertise in deploying and managing IaaS & PaaS Infrastructure services on AWS, GCP & VMWare environments using Terraform, Cloud Formation, CDK (Cloud Development Kit) & Ansible
• Hands on experience in Ansible tower as well as writing and deploying Ansible Playbooks
• Relevant cloud certifications such as AWS Cloud Practitioner or Sys Ops .
• MUST have experience on Singapore Government Cloud
• Familiarity with containerization technologies such as Docker , Kubernetes Docker and EKS. And
• Public cloud delivery know-how with AWS and/or Azure
• Hands-on AWS experience with at least 2 implementation (preferred in an Enterprise scale environment)
• Experience with core AWS platform architecture, including areas such as: Organizations, Account Design, VPC, Subnet, segmentation strategies.
• Experience with Cloud native Backup and Disaster Recovery approach and design
• Knowledge of DevOps and CI/CD pipeline (GitHub, Jenkins, Artifactory)
• Familiar with Encryption, Logging, and Privacy/Security Protocols (e.g. TLS 1.2, ELK stack)
• Familiar with one of the enterprise operating systems (Microsoft Windows Server (20012 & up) and/or RHEL 7, 8)

People Profilers Pte Ltd

DID: 6950 9738

http://www.peopleprofilers.com

Lim Yi Tian, Candy

EA License No. 02C4944

Registration No. R1109829

Job Description

• Perform and certify aircraft maintenance tasks including inspection, repair, modification and functional tests

Required Skills

• Holds a valid Cat. B1 Aircraft Maintenance Engineer's License* with 2 or more of the following aircraft type ratings:

1. A330 (Trent 700/CF6)
2. A380 (Trent 900/GP 7200)
3. A319/320/321 (NEO/PW/V2500/CFM56)
4. B787 (Trent1000/GENX)
5. A350
6. B737- 600/700/800/900 (CFM56)
7. B737 MAX

• Holds a valid Company authorisation with 2 or more aircraft type ratings listed above
• Have at least 5 years of aircraft maintenance experience, with a minimum of 2 years of recent certification experience as an Engineer
• Holding a valid CAAS Part 66 (Cat. B1) Aircraft Maintenance Engineer’s License with the above-mentioned aircraft type ratings is advantageous
• Excellent interpersonal and communication skills (English proficiency in reading/writing)
• Good customer relationship skills

Job Descriptions:

• Oversee and execute projects for cost-effectiveness, on-time delivery, and quality standards.
• Manage projects according to ISO 9001, ISO 14001, and OHSAS 18001 standards and contractual requirements.
• Handle pre and post-contract stages, including vetting tender documents, organizing activities, and settling accounts.
• Develop and implement project management plans for scheduling, monitoring, reporting, and forecasting.
• Ensure compliance with safety regulations and provide scheduling, budgeting, and specifications for project work.
• Verify drawings and quantities for accurate project implementation.
• Conduct project planning, cost control, project management, and documentation.
• Provide direction in construction planning, coordinating work with other departments, sub-contractors, clients, and consultants.
• Liaise and assist in submitting permits and licenses to relevant authorities.
• Attend meetings, correspond, and liaise with clients, sub-contractors, and suppliers.
• Resolve design and site problems encountered during the construction period.
• Plan and manage actual and post-construction issues with clients, consultants, sub-contractors, and relevant authorities.
• Ensure proper documentation of the project, including record-keeping of correspondence and as-built drawings.
• Supervise work carried out by sub-contractors and suppliers for adherence to project schedules.
• Ensure the highest quality in work performed by sub-contractors, fabricators, and suppliers.
• Liaise with consultants, clients, sub-contractors, and suppliers on project implementation.
• Check progress claims submitted by sub-contractors.
• Monitor, track, and report project progress, overseeing engineers, supervisors, technicians, and on-site sub-contractors.
• Follow up on defective work and ensure timely rectification by contractors, fabricators, and suppliers.

Job Requirements:

• Possess a recognized degree by BCA in Civil Engineering.
• Have experience in Civil Engineering Projects, particularly in Marine Construction, such as Jetty, Wharf, Harbour, Dredging, etc.

Company: Chemical Manufacturing Company

Location: West

Position: Project Technician (Job ID: 18806)

Working hour: Mondays – Fridays, 8.30am – 5.30pm

Job Description:

• Monitor project activities
• Report to Section manager/Department Manager
• Maintain and control project site and safety
• Verify project deliverable with site documents
• Report to Section Manager on site/safety deviation or issues on projects
• Attend/Conduct tool box meeting
• Report & Assist Section manager/Engineer in project deliverables
• Participate in department EHS activities
• Assist maintenance activities
• Prepare PR and update the cost summary as required
• Maintain project document filling and organize documents

Job Requirements:

• 1 – 2 years’ experience or knowledge in the Project Site of chemical industry.
• Possess a Diploma or equivalent
• Microsoft office skills

We regret that only shortlisted candidates will be notified. Other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Effective from 1 October 2020 under the new Employment Agencies (EAs) Licence Conditions,

EAs will be required to collect the personal data (e.g. NRIC number number for overseas candidates) of applicants referred to employers for permanent or contract job positions of at least six months with a fixed monthly salary of S$3,300 and above.

PDPA requirements on collection, use, and disclosure of personal data would not be applicable to EAs that are collecting such information as it is a regulatory requirement by Ministry of Manpower.

Lee Xin Hui

EA Registration No: R22108046
Pasona Singapore Pte Ltd
1 FINLAYSON GREEN ＃09-02 SINGAPORE 049246
EA License No:90C4069

• Support the handshake between development team (i.e. NPD, New Product Development) and NPI for the assigned portfolio, by making sure that all results, reports and deliverables are reviewed and available.
• Coordinate with engineering and product management departments and develop and implement Manufacturing Plan for products which includes planning, scheduling, and monitoring of material movements through the workflow process to meet build schedules. Analyzes and anticipates project material requirements to ensure required materials are properly forecasted and driven. Resolves material supply issues.
• Monitors and ensures NPI cycle goals are met, including provision of shortage reports, navigating deviations. Communicates on-time delivery, delays, and/or changing priorities for NPI lots to all stakeholders.
• Secure the system readiness for mass production, by collecting and providing all the required information to the system owners (e.g. Bill Of Materials (BOM), Process flow specifics (e.g. UPH estimates, PCP, etc.), Traceability
• Support Operations during the first stages of the volume ramp up (BE2 @RF360 only).
• Prepare and update the product data base for new products and ensure its correctness.
• Liaise with preceding production sites delivering wafers into BE2 (RF360 and UTAC) regarding meeting and monitoring of committed throughput times, optimization of shipment flow - seamless transition between BE1 and BE2 without impact by warehouse and production restrictions (opening hours, limited support on weekends etc.).
• Determine at BE1/2 sides reasons for shortcomings in committed delivery times, address and resolve non-technical or non-fundamental technical issues directly with BE1/2 sites as first line of defense and channel recurring or fundamental system or technology shortcomings into the correct support channels (e.g. NPI or Technology team in San Diego).

Preferred Qualifications:

• Bachelor's degree in Business Administration, Management, Engineering, Computer Science or related field.

• APICS certification.

• 3+ years of experience creating, scheduling, and maintaining program plans, planning and coordinating materials, production operations, or engineering project development.

• 2+ years of experience with program management tools.

• 2+ years of work experience in a role requiring interaction with senior leadership (e.g., Director level and above).

• 2+ years of experience working in a large matrixed organization.

• 1+ year of working with operating budgets, resources, and/or project financials.

Roles & Responsibilities:

• Verify customers’ RFQs
• Design, conceptualize and calculate complex customer-specific solutions for explosion protected areas
• Create techno-commercial quotations, technical customer documentation and drawings
• Support Sales in close cooperation with the corresponding interface areas including but not limited to production, engineering and quality
• Execute, support and monitor orders till shipment including coordination with manufacturing facilities, 3rdparty suppliers and service providers
• Interact with clients and engineering contacts to provide technical, engineering and design support and advice

Experience & Qualifications

• Bachelor of Engineering degree in electrical engineering
• Minimum of five years’ experience with proven records
• Remote I/O with various communication protocol such as Profibus, Modbus & Ethernet IP
• Human Machine Interface (HMI) with Windows OS for Serial and EtherNet communication

Skills and Abilities

• Knowledge about Ex-atmospheres, type of protections, zone classifications, equipment groups
• Knowledge in SAP
• Excellent communication skills, both verbal and written in English. German would be an added advantage.
• Customer focused attitude & teamwork (Responsiveness, Accurate & Customer Friendly)
• Proficiency in office management software (MS Office, MS Project, others)
• Independent and result-oriented
• Ability to work under pressure
• Quick learner and adaptable
• Able to travel occasionally

Roles and Responsibilities:

• Perform daily operational activities which includes attending to customers' enquiries, needs and complaints
• Perform preventive and breakdown technical support and maintenance for mechanical/electrical services, plumbing & sanitary services, Aircon servicing and maintenance, ACMV systems, chillers, and electrical control
• Handling works at Grade A Commercial Buildings

Requirements

• Nitec in Mechanical / Electrical or related field
• Candidates with 2 years or more related experience in Facilities Management will be an added advantage
• No experience is welcome to apply (on Job Training)
• Positive attitude, good interpersonal and customer-centric skills
• Shift Work required (3 shifts)
• Work Location: CBD
• Only Singaporeans may apply

Designation: Bench Test Engineer BTEQA130324PT

Positions: 4

Salary Range: 4,500 SGD ~ 7,000 SGD

Job Description

• Responsible for PMIC, Mixed Signal & RF IP Test characterization, Test code development and Test Platform Enablement.
• Good testing knowledge on Buck/LDO regulator parameters such as line/load regulation, efficiency, accuracy, RDSON, Load/Line Transient, PSRR, other parametric measurements etc.
• Hands on experience on common bench equipment (Source meter, oscilloscope, spectrum analyzer, logic analyzer, power supplies, Function generator, etc.) for Characterization, Debugs, and circuit deep dives for design debugs.
• Understanding and experience in lab characterization of Mixed Signal or RF IP and Baseband Modem Functional Blocks (ADC, DAC, PLL and etc.)
• Experience in code development for automated measurements using lab equipment is needed.
• Work closely with test engineering team and production support team to drive debug activities and data correlation with ATE.
• Provide detailed status reports at each phase, test limit (guard band) generation and summary reports.

Job Requirements

• Graduates with Degree in Electronics or Electrical Engineering
• 2- 5 years relevant experience in characterizing mixed signal IP & RF
• Solid understanding of RF & Mixed Signal test concepts and measurements
• Hands on experience with lab equipment such as Spectrum Analyzer, Digitizers, High Speed Serial Data analyzers, etc.
• Experience in the following areas: Embedded C/C++, LabVIEW, FPGA development.
• Good experience with statistics and data mining.
• Strong Data analysis skill & exposure on any Statistical Analysis Software’s JMP, CEDA or Data power and Optimal plus tool knowledge is a plus.
• Knowledge in scripting (perl/python/vba) and automation in reporting is a plus.
• Very strong verbal and written communication skills and able to work independently.
• Only Singaporeans/ SPR preferred.

Responsibilities

• As a team member of APS , your primary role will be to:
• Provide L1/L2 Application support to Front Office users
• Adhere to Service Level objective target
• Ensure adherence to APS support roster in terms of mailbox, webportal and hotline
• Should take part in 24/7 production support (i.e Shifts/Weekend/Public holidays)
• Escalate timely to Head of APS on possible risks, escalation matters and management issues.
• Review and create application Support knowledge articles.
• Contribute to the continuous improvement plan

Profile

• Bachelors' degree in Computer Science or Computer Engineering
• Total 5+ years of overall IT experience.
• 1+ year experience as L2 support
• Analytical and Problem-solving skills
• Excellent communication skills along with a customer/user-centric mindset
• Willingness to continually update and enhance skills in systems and processes through own efforts and trainings.
• High level of persistence, can-do attitude & pro-activeness

Required Skillset :

• Proficiency in managing logging stack such as Elasticsearch Cluster Management, Logstash, Filebeat, ILM, Kibana, Watchers and Dashboards
• Expertise in Prometheus and exporters, Grafana, Alertmanager, APM
• Knowledge in writing Promql queries and Grafana Dashboards implementation
• Expertise in CI/CD pipeline implementation
• Troubleshooting experience of java ,sprint , react applications. Dev skills would be handy.
• Hands on containerized platforms like Docker/Kubernetes
• Experience with source code control systems like Bitbucket
• Knowledge about High availability, Disaster Recovery and backup.
• Experience with Object Storage Systems like S3
• Providing L1/L2 production support to the systems.
• Experience with Linux systems configurations.
• Experience in Shell scripting and Python.
• Basic understanding of source control concepts, best practices, and the software development lifecycle.
• Strong verbal and written communication skills.
• Critical thinking and problem-solving skills.

Nice to have :

• Added advantage if knowledge on any of the following components Grafana Mimir, Tempo, Loki, Events, Profiling
• Understanding Terraform or Ansible
• Understanding reported vulnerabilities and fixes.
• Knowledge about Opensearch
• Open to explore new tool sets for observability
• Knowledge on PagerDuty and Incident Management

Job Summary:

· Salary: Up to $4000

· Working Days and Hours: 5.5 days - Monday to Friday (Alternate Saturday - 2 Saturday in a month)

8am - 5.30pm

· Location of work: Ubi Road (Near to Paya Lebar/Tai Seng MRT)

Job Responsibilities:

· Conduct site visit to prepare quotations (i.e. using SOR rates), develop project schedule.

· Prepare risk assessment plan and method of statement, safe work procedures as per authority's guidelines.

· Conduct site inspections to ensure that all works are completed as per agreed project scope. To follow through with delivery order endorsed by client.

· Manage project team, site works, materials and equipment effectively and efficiently.

· Any other ad-hoc projects and duties as required by the management.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Gan Chen Yun

Registration Number: R23116696

EA Licence No.: 06C2859

(MCI Career Services Pte Ltd)

Broad Functions:

The primary responsibility of ESH Engineer and Assistant Engineer is to Assist ESH Section Manager in ESH related activities and programme to ensure legal compliance with Environmental, Safety & Health Requirements and conformance to Safety and Health Management System

1. Job Description / Responsibilities:

1.1. Month-end, quarterly and year-end closing functions

1.1.1. Request Quotation
1.1.2. Check Product Specifications meet Operational Needs
1.1.3. Request service / delivery schedule
1.1.4. Liaise with suppliers for solution to issues faced.
1.1.5. Communication with process owner for feedback1

1.2. Data Collection for ESH Related activities

1.2.1. Communication with process owners for data collection related to ESH.
1.2.2. Data analysis and interpretation
1.2.3. Collect feedback from stakeholders.
1.2.4. Work with stakeholders for improvement to identified issues.

1.3. Promotion of In-house Safety Culture and Awareness

1.3.1. Routine Inspection of Workplace
1.3.2. Education and awareness training
1.3.3. Involvement in Risk assessment, HAZOP, EAI, PPE assessment review.
1.3.4. Conduct ESH-Related Programmes to promote safety culture.
1.3.5. Communication to all staff on ESH-Related cases for awareness and case-study learning
1.3.6. Conduct safety induction course for new staff
1.3.7. Conduct PSSR (QESH inspection) for new equipment and process
1.3.8. Assist in Monthly ESH Team Meeting
1.3.9. Promote workplace Improvement suggestion by stakeholders.

1.4. Compliance to Legal and Other Requirements\

1.4.1. Arrangement for 3rd party testing (Industrial Hygiene Monitoring, Stack Emission Monitoring, etc)
1.4.2. Internal ESH Awareness Training
1.4.3. Arrangement for 3rd party Training (Forklift Refresher, Respirator Fit Testing, CERT, Confined Space, First Aider, etc)
1.4.4. Provide advice and improve Legal Compliance awareness for related stakeholders.
1.4.5. Assist in SHMS audit (document preparation, verification, etc)
1.4.6. Assist in Legal Register documentation.
1.4.7. Communication of changes to Legal Requirement and recommend follow up actions required.
1.4.8. Assist in document submission to Authority.

1.5. Contractor Management

1.5.1. Review documents submission by Contractors and Vendors
1.5.2. Conduct Safety Induction Course for Contractors and Vendors
1.5.3. On-site Assessment of work done by contractor and vendor
1.5.4. Ensure PTW compliance.
1.5.5. Management of Contractor and their activity to ensure safe work practices and safe working environment.
1.5.6. Communication with Stakeholders for proper planning to assign laydown area and resting area for contractors.
1.5.7. Ensure 5S on Workplace Monitoring.

1.6. Process Safety Improvement

1.6.1. Understanding of Process Outline and Process Flow
1.6.2. Identify areas with pain points.
1.6.3. Communication with Process Owners on areas for improvement
1.6.4. Understanding on the workings of new Technology and how it can be applied to current existing process.
1.6.5. Design Review with stakeholders for Management of Change (PCA)
1.6.6. Review of Standard Operation Procedures with Process Owners to integrate Safe Work Practice as well as implementation of Lock Out Tag Out and Safe Shutdown Procedures.

1.7. Emergency Response

1.7.1. Assist SIC, SMC, FSM for On-site Emergency Preparedness activity.
1.7.2. Coordinate with General Admin section and Guardhouse Security to ensure site security.
1.7.3. Communicate with relevant Authority for emergency & security-related issues.
1.7.4. Verified Functionality and Availability of on-site emergency equipment and tools.
1.7.5. Assist in Emergency Response Plan revision if necessary.

2. Requirements:

2.1. Degree / Diploma related to Engineering / Chemistry / Environmental or equivalent.
2.2. Minimum 3 years Relevant working experience.
2.3. WSQ Specialist in WSH Level C
2.4. WSQ Manage Work at Height
2.5. WSQ Supervise Work in Confined Space
2.6. WSQ Assess Confined Space for Safe Entry and Work
2.7. WSQ Implement Incident Management Process
2.8. WSQ Develop a Risk Management Implementation Plan
2.9. Fluent in Microsoft Office – good understanding on applying functions, formula, tools.
2.10. Understanding of ISO and Management System elements
2.11. Good understanding of Singapore Legal Requirement
2.12. Understanding of MHI implementation and assessment
2.13. Process Safety knowledge and understanding
2.14. Bilingual
2.15. Pro-active and willing to learn.
2.16. Good Communication skills, able to practice empathy to better understand and resolve complex issues.
2.17. Work as a team harmoniously as well as independently without supervision
2.18. Plan and schedule work in orderly manner and work with deadline
2.19. Being an exemplary to lead and guide others to adopt and follow Safe Work Practices
2.20. Have interest in Process Safety understanding and application.
2.21. Able to interpret meaningful connection for data analysis.

3. Others:

3.1. Location: Jurong Island (Company Transport provided)
3.2. Commence work: ASAP.
3.3. Applicants can work in Singapore without requiring a work pass.
3.4. Working Hours: Mon ~ Fri from 8:00 am - 4:45 pm

oles and Responsibilities

• To carry out all preventive and breakdown maintenance for all Aircon equipment.
• Ensure safe keeping of hand tools and maintain good housekeeping.
• Ensure all works are carried out safely and/or in accordance with safety procedures.
• Provide technical advice and assistance on all maintenance functions.
• Any other tasks, when required by the immediate superior.
• Prepare service reports after every completed job for customer’s endorsement.
• Communicate with clients with regards to problems in equipment and post-job reports.
• Any ad-hoc tasks given by supervisor or management.

Requirements

• Nitec in Mechanical / Electrical / Electronic or related field
• Candidates with at least 2 years of related technical experience in chillers, ACMV equipment, switchboard, and generators will be an advantage
• Candidates with no experience are welcome to apply (on Job Training)
• Positive attitude, good interpersonal and customer-centric skills
• Only Singaporeans may apply

Roles & Responsibilities

• Microservices dev with Java and spring boot; Kafka; MongoDB and MariaDB
• Operations on PCF, OCP, VPC, Jenkins, AWS
• Data engineering with Spark and Python
• Release management
• Excellent tech and business stakeholder management

Requirements

• 7 to 10 years experiences
• Microservices dev with Java and spring boot; Kafka; MongoDB and MariaDB
• Operations on PCF, OCP, VPC, Jenkins, AWS
• Data engineering with Spark and Python
• Release management
• Excellent tech and business stakeholder management

Job Description

• Provide security and admin support to the department
• Monitoring company drivers’ live location through our dedicated system
• Preparing and processing documentation, arranging requests, answering calls and handling basic paperwork
• Any ad-hoc duties as assigned

Requirements

• Minimum secondary education
• Basic computer skills
• Reliable, strong work ethics and positive working attitude
• Prior work experience in the security industry is preferred

Be a part of our diverse family at Hai Leck, embracing each other as you discover your unique career potential and find your perfect fit with us. We are committed to unlocking your potential and guiding you to success. Our employees are valued down to their skills, and we are committed to training them and expanding their knowledge.

We would be pleased to welcome you at our family in Hai Leck if you are a suitable member.

Email us at [email protected] now!

Key Responsibilities:

• Handle plant / lab and building utilities and maintenance, hands-on repair work for various types of pump and agitator machine.
• Handle electrical motors and general electrical and mechanical works.
• Handle maintenance work orders in SAP system.
• Perform preventive maintenance/ corrective maintenance according to SAP orders.
• Contribute improvement idea or modification work on equipment.
• Supervise contractor for repair job to meet the required standards.
• Able to understand electrical wiring diagram.

Requirements:

• NITEC / Diploma in Electrical/Mechatronic/Mechanical Engineering.
• Possess at least 4-8 years of working experience in electrical wiring trouble shooting and mechanical repairs with experience working in a chemical plant.
• Able to perform hands-on repair work.
• Possess positive attitude and willing to learn new things.
• Added advantage if have working experience in waste treatment/DI plant operation and milling machine.

Other Information

• 5 days work week and rotate on standby for cases of emergency calls or overtime for weekends if required
• Working hours: 8am to 5.15pm
• Basic Basic up to $4,200.00 + Shift Allowance - $6 per day + Transport - $10 per day (if employee is physically at work)
• Working Location a Tanjong Penjuru Crescent with Transport Pick up Either at Jurong East MRT area or Bouna Vista MRT area

Interested applicant kindly send in your resume. We regret only shortlisted candidates will be notified.

EA License No. 14C7092

EA Registration No: R1110882 (Ming Er)

Responsibilities:

• Maintain chemical plant/lab and building utilities system, hands-on repair work for various types of pumps and agitator machine.
• Handle electrical motors and general electrical and mechanical works.
• Read and understand electrical wiring diagram.
• Update work orders in the SAP system.
• Perform preventive maintenance/ corrective maintenance according to SAP orders.
• Contribute improvement ideas or modification work on equipment.
• Supervise contractor for a repair job to meet the required standards.

Requirements:

• Higher NITEC / Diploma in Electrical/Mechatronic/Mechanical Engineering.
• Minimum of 4-6 years of working experience in electrical wiring trouble shooting and mechanical repairs.
• Experienced in the hands-on repair tasks in chemical plant.
• Experience in waste treatment/DI plant operation and milling machine is good to have.
• Possess positive attitude and willing to learn new things.
• Able to perform standby when required.

To apply, please click "Apply Now" or visit www.gmprecruit.com and search for job reference: 24113

GMP Technologies (S) Pte Ltd | EA Licence 11C3793 | EA Personnel: Novita Widjaja | Registration No: R22105960

• Up to $5,000
• Reputable company with good company culture
• LTA Projects experience

RESPONSIBILITIES:

• To present Competent in his/her engineering skill especially in design / Knowledge & understanding of code of practice in building services to customer
• To exhibit site solving skill & site coordination to customer.
• Coordinate, monitor & control of supplier's materials/equipment’s &subcontractors' installation quality.
• Produce shop drawings & coordination of drawings etc.
• Prepare work schedules & attend client meeting and internal meeting.
• Understand control system philosophy for M&E Services
• To assist manager on the day to day activities under the Master Planning schedule, Quality, safety, Etc.
• Check for non-conformance product or installation to avoid defects.

REQUIREMENTS:

• Singaporean/Singapore PR Only
• Diploma in Mechanical Engineering
• Minimum 2 years of Relevant Experience
• Code of practice
• Knowledge of ISO 9000 / OSHAS 18000 (Minimum Requirement)
• Skill requirement: ISO internal Quality Auditor, Building construction safety supervisor course

OTHER INFORMATION:

• Salary: From $3,500-$4,000 / Negotiable (Salary will commensurate according to experience & qualifications).

HOW TO APPLY:

Simply submit your application with your updated Resume in MS Word Format to Ashwin Vivek Vinod (EA Personnel Reg. No.: R22111690) (BEP) by clicking the ‘Apply link’ or call your friendly Consultant, Ashwin Vivek Vinod, at 6590 9957 or 9178 0355 for a confidential discussion.

Please click APPLY NOW button to submit your application

Please indicate the below information in your resume:

• Current & Expected salary

• Reason(s) for leaving

• Availability to commence work

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt-out by unsubscribing in the mailer. You may refer to and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

Job description;

Come help develop the future of software used in industrial automation. We are seeking individual with a real passion for learning that are curious and often challenge the status quo. Attitude, aptitude and integrity are central to all successful applicants. Together, we work to build our primary product.

PLC programmers are responsible for programming assembly lines, devices, or other manufacturing processes using programmable logic controllers (PLC). This role is ideal for a detail-oriented, logical thinker who enjoys working with different machines in combination with computers. PLC programmers work full time but experience a moderate amount of travel and activity in the workplace, such as supervising the installation of their programs and machinery.

The daily responsibility involvement includes of the following;

Design and perform detailed designing for machine electrical control systems;

Write Programmable Logic Control (PLC) program for automatic machine control & processes;

Develop process specific application function libraries.

PLC application programming and build new function library

Ability to utilize, debug, design and install engineering software

To collaborate and work together with the Design Team (comprising of both mechanical & electrical members) for the design concept arising from new project proposal and confirmed projects;

Requirements;

Diploma or Degree in Electrical Engineering OR its equivalents;

Good knowledge of PLC and circuit design;

Demonstrated ability to visualize projects, develop and produce design from concept through completion

Sound knowledge of process instrumentation, PLC programs such as, Allen Brandy , Siemens, ABB

RS422, RS485, Modbus TCP, Profitbus , Profitnet , EntherIP and other industrial interface protocol

Knowledgeable of VB, VC, C# will be considered as an added advantage;

Plus;

Programming experience in C++, Python, SQL or similar language

Industrial electrical panel design

HMI/SCADA programming (Allen-Bradley, Siemens , ABB 800xA)

Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Engineering (Electrical/Electronic) or equivalent.

At least 3 Year(s) of working experience in the related field is required for this position.

Required Skill(s): PLC，HMI，SCADA, DCS

Preferably Entry Level specialized in Engineering - Electrical or equivalent.

- Handle general administrative duties such as attend to phone calls, email correspondences, filling of documentation & data entry ect.

- To provide administrative support to Admin/Accounts/Engineering Departments like tender submission, preparing the quotation, support preparing documentation and repot.

- Assist to organise and schedule meetings

- Required to prepare monthly submission reports for reporting purposes.

- Perform other general administrative duties assigned by Superior.

- Able to use measuring instrument (example: vernier caliper, micrometer, profile projector etc).

- Require grinding precision to 0.005mm.

- Quality check on pre-form and finished products.

- Able to understand drawing process requirement.

Requirements

· NTC/NITEC Related technical skills certification

· Experience in Precision Engineering / Tool Making

· Possess basic proficiency in English