System Engineer, Regional Service

Are you a technical enthusiast with flair for effective communication and a passion for on-site project implementation? Can you troubleshoot with finesse and communicate technical solutions effectively? If you are service-minded, technically adept, and ready to work globally, our new Singapore-based position as a Service Support Engineer might be your next exciting challenge!

Duties and Responsibilities

With reference to the Service Lead in AGRAMKOW Asia Pacific, you will be responsible for incoming requests from customers, regarding issues from technical support, maintenance advice to escalation of requests. Channels of these requests can be via telephone, e-mail and/or via our Customer Management System. You will be part of an international service team with colleagues all over the world.

During your onboarding, AGRAMKOW will provide extensive training in Singapore and in the Head Office in Denmark. Your experience in planning, scheduling, and conducting both technical and management facets will shine, as you have strong interpersonal and effective communicative skills and bring them into play. You work both independently and collaboratively across country boarders. You do this in an ambassadorial manner, being aware that you are an important part of our regional center of competences and service support.

In addition to this, you should be open-minded and always be approachable, especially during on-site customer visits. During these visits, you will support and advise customers in any matter relating to the maintenance of equipment, software configurations and training.

You know how to prepare comprehensive project reports and excel at turning project progress into reliable reports. Therefore, basic electrical knowledge and understanding of electrical - and mechanical drawings is a must. Your role also involves preparing of installation drawings, ensuring every detail aligns seamlessly.

The position is located in Singapore. Your travel coverage will be within the Asia Pacific Region. The role will require travel of at least 30% of a year.

You will also be required to provide stand-by cover, that may require attendance at customer site outside of normal working hours.

Skills and Requirements
You hold a relevant technical education, such as a degree in Electronics and Computer Engineering or similar. In addition, the following will be required:

• A minimum of three years’ experience in an industrial or automation-based project environment.
• In depth understanding of IT-hardware and networking concepts.
• Working knowledge of SQL databases and query language is preferred.
• Knowledge of process systems for HVAC or industrial production/manufacturing environment is a plus.
• Knowledge of Data Systems for production/manufacturing environment is a plus.
• Self motivated, enjoys meeting new people and able to work well in a team environment.

As you will be part of an international team, proficient level of English is a must – spoken and in writing. Fluent Mandarin is an advantage.

What We Offer
We offer an exciting newly established position with great opportunity for both personal and professional development. You may be working with our global installation teams from time to time.

We invite candidates for interview on an ongoing basis and close the position once we have found the right Candidate for the job.

RESPONSIBILITIES

• Oversee the design timeline and make sure the work is completed in compliance with the contract and laws.
• Examine, evaluate, look into, and create the design. Create technical documentation and guidelines in accordance with the specified budget,
• As new designs and products are being developed, prepare engineering documents (technical specifications, calculations, drawings, etc.).
• Create new drawings, revisions to existing drawings, parts lists, and change orders.
• Analyze the effects of the arrangement and illustrations.
• In collaboration with the Ship Design Authority, plan and coordinate any necessary design modifications.
• Using specified test protocols from the technical database, test and validate the technical interfaces for the work completed.
• Communicate with the Ship Design Authority and ship owners to get their approval for the engineering deliverables.

REQUIREMENTS

• Minimum Degree in Electrical Engineering
• 1-2 years experience in Electrical Design Engineering or Naval Engineering Officer
• Stay up to date on military, industrial, and naval classification rules that are pertinent to design work.
• Project Management Skills in Engineering Design is highly advantageous

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

We are looking for a detail-oriented safety coordinator to assess the health and safety standards in our workplace. The safety coordinator is also responsible for educating employees on how to follow health and safety protocols more closely.

To be successful as a safety coordinator you must have attention to detail and have excellent communication skills. A good safety coordinator has a methodical approach to improving health and safety standards.

Safety Coordinator Responsibilities:

• Monitor staff to evaluate if health and safety laws are being followed.
• Assess equipment and machinery to gauge if they are in safe, working order.
• Create plans to improve health and safety in the workplace.
• Educate staff on health and safety protocols.
• Prepare reports for management.
• To conduct In house training to employees.
• To Conduct TBM on site to employees everyday.

Safety Coordinator Requirements:

• Advanced Certificate in Workplace Safety and Health (Level B).
• Experience as a health and safety Coordinator.
• Excellent communication skills.
• Attention to detail.

Job Description

• Provide all level of technical training, pre-sales technical support, system design and post sales installation, commissioning, on-site training and training for end-users and distributors.
• Provide maintenance and servicing/repairing of equipment and systems at site.
• Assist sales team to prepare technical specification, CAD schematic drawings, bill of materials and related technical documentation.
• Perform on-site installation and setup of equipment and systems with strong competent skills.
• Carry out fabrication work of technical demo units for the company and distributors.
• Develop technical manuals and other technical documentation.
• Handle product quality issues and customer complaints.
• Travel regionally is essential to (technical) support all internal and external parties.
• Execute any other ad hoc duties and responsibilities which the Company may assign from time to time at its discretion.

Job Requirements

• Diploma or Bachelor Degree in Engineering (preferably mechanical) or its equivalent.
• At least 3-5 years relevant experiences as mechanical or electrical engineer preferably with CAD design experience.
• Related experience in a multi-national company will be an added advantage
• Excellent communication, interpersonal, influencing and presentation skills, with the ability to interact with key decision makers at all levels across a diverse range of countries.
• Willing to work in fast pace environment.
• Hands-on, willing to learn and proactive.
• Able to communicate with our counterpart in Beijing is a must.

COMPANY DESCRIPTION

Beyondsoft International (Singapore) Pte. Ltd. was set up in 2007 and established as the regional headquarters for the Southeast Asia (SEA) and European markets in September 2015. Based on our vision of "Using technology to promote social progress, economic development and become a global customer preferred partner" and our concept of "Beyond your expectations", Beyondsoft is committed to provide our customers in countries along the "Belt and Road" with comprehensive solutions and products and creating commercial value for customers to realizing continuous businesses development.

Our core business includes:

1. IT development services providing customers with IT consulting, software research and development, software and hardware testing, system integration and operation and maintenance, data analysis and other services;
2. New retail solutions and products through intelligent products, helping small and medium-sized enterprises (SMEs) realize the digital transformation of their daily operations;
3. Internet of Things (IoT) platform and solutions comprehensive use of IoT, artificial intelligence, big data, cloud computing and other technologies to provide IoT solutions for intelligent upgrades in cities, parks, buildings and industries, to create a smart future.

For more information, please visit www.beyondsoft.com.

RESPONSIBILITIES

• Integrating Infra and Application System to meet the project's needs.
• Resolving technical problems as they arise.
• Informing System Manager about any problems with the current technical solutions being implemented.
• Support and coordinate, maintenance, patching, upgrade and troubleshooting of security systems.
• Create detection use cases and fine tune detection rules to strengthen detection and reduce false positives.
• Assist in Cybersecurity project implementations to ensure that the application development team can deliver application solutions.

• Minimum 1 year system development experience
• Extensive knowledge and experience deploying with security product, eg: Tenable, Priviledge Access Management, EDR, DAM, Endpoint Protection, etc.
• Experience deploying Critical IT infrastructure in Government Cloud Data Centre and/or on-prem setup.
• Experience in software engineering and system design architecture
• Knowledge and experience working with DevOps tools, Windows and VMWare.
• Strong knowledge of security, controls, privacy and compliance in the government services domain
• Diploma in Computer Science, Software Engineering or equivalent
• Identify and evaluate the risk to eliminate or mitigate risk in a computer system or network.

Job Summary:

Salary package: Basic $3000 - $3500 + AWS + VB
Working hours: Mon to Fri 8.30am - 6.00pm
Working location : Macpherson

Job Responsibilities:

- Install, modify, service, and upgrade equipment in accordance with maintenance and service agreements and technical specifications.

- Perform regular maintenance, preventive and corrective maintenance on customer equipment to maintain equipment reliability.

- Maintain accurate service records, monitor the performance of equipment, and notify senior engineers of recurring problems.

- Understand and practise factory diagnosis and preventive maintenance activities. Understand solution items and make proposals to customers.

- Perform other related ad-hoc tasks as assigned by management from time to time.

Requirements:

- Diploma in electrical & electronics, mechanical or mechatronics engineering.

- Minimum 3 years’ experience in equipment service, repair & maintenance.

- Proficient in Microsoft Word, Excel & PowerPoint

How to apply:

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret that only shortlisted candidates will be notified.

Lau Jie Xi - DT13

Registration Number: R21103272

EA Licence No: 16C8004 (Elitez Pte Ltd)

Job Description

Module Process Development and Optimization:

• Engage in the refinement and enhancement of manufacturing processes specific to modules.
• Identify areas for efficiency enhancement and implement improvements to attain optimal outcomes.

Consumable Material Evaluation and Testing:

• Assess consumable materials for compatibility with manufacturing processes.
• Conduct comprehensive testing to verify the reliability and performance of consumables in the production setting.

Data Analysis, FACA, and DOE Testing:

• Conduct thorough data analysis to detect patterns, anomalies, and opportunities for enhancement.
• Apply Failure Analysis and Corrective Action (FACA) methodologies and perform Design of Experiments (DOE) testing to bolster process robustness.

Definition and Documentation of Standard Specification Documents:

• Develop and document standardized specifications for processes and materials.
• Ensure documentation completeness to enable consistency and adherence to quality standards.

Resolution of Technology Issues to Enhance Process Yield:

• Investigate and resolve technology-related challenges affecting process yield.
• Collaborate with cross-functional teams to deploy solutions and continually enhance overall production efficiency

Job Requirements

• Min. Diploma in Engineering Science
• An opportunity to work as an expatriate with an 85% deployment in India locations.
• Proven experience in assembly, film lamination, glue binding, wet clean, or laser processes.
• Familiarity with quality control and process optimization techniques.
• Ability to troubleshoot and implement improvements in manufacturing processes.
• Good analytical and problem-solving skills.
• Effective communication and collaboration skills for cross-functional teamwork.
• Adherence to safety protocols and regulatory requirements.
• Continuous improvement mindset to enhance efficiency and product quality.

HOW TO APPLY:

Interested applicants please send your latest resume to ref37(at)trustrecruit.com.sg or click on “Apply Now” and provide the below details in your resume.

Current salary (breakdown)
Expected salary
Notice period
Reason of leaving

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Jayden Ong

EA Personnel Reg No: R24119451

Company information

Registration No.

201935022Z

EA No.

19C9950

Report this job advert

Be careful

Don’t provide your bank or credit card details when applying for jobs.
Learn how to protect yourself

Report this job ad

• Overseeing all projects. Managing and liaising with various Project Managers to make sure project delivered within costs, quality and time.
• Guiding Project Managers and Department heads in strategic decision-making, offering leadership and guidance, and nurturing their leadership abilities to attain operational goals and objectives.
• Overseeing essential performance metrics and operational indicators, analyzing data to pinpoint areas needing enhancement, and implementing strategies to boost performance.
• Attend meetings with clients, consultants, suppliers, subcontractors with project managers to resolve complex issues.
• Manage profits and losses for the company.
• Participate in management meetings to provide updates on project advancement and ensure the Board remains informed about any significant concerns
• Establish and cultivate robust professional connections with clients and consultants.

Job Description & Requirements

• To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance to the Project specifications, construction drawings and Building Control Act and Regulations.
• To be overall in charge of the management and control of a team of site staff or Resident Technical Officer(s) in performing their duties on site so that they can provide satisfactory supervision and to take responsibility of their work and performance.
• To oversee in all aspects relating to the construction of the Project, keeping and submitting record of works, materials, equipment at site, attending meetings, keeping minutes of meetings and discussions, assisting in the co-ordination of Contractor’s works with Consultants and any external parties like neighbouring contractors and utility companies.

Requirements:

• Minimally a Degree in Civil Engineering recognized by the Professional Engineers Board.
• Candidate must be a registered Resident Engineer with BCA.
• At least 6 years site supervisory experience in LTA projects.
• Must be literate in English and have a good knowledge to use computer, computer software, e.g. Microsoft

The Opportunity:

You will be one of the most senior technical contributors in ION Mobility - Singapore, working very closely with the CTO and collaborating with senior leaders in the organisation. You will make tech decisions that significantly impact a range of projects across multiple business units. You are also expected to be hands-on and actively involved in on-going projects.

What you will do:

Design, plan, and build internal systems based upon existing open source software to enable production scale manufacturing of renewable energy vehicles and systems. You will be based in Singapore and work across/ with multiple offices in Indonesia, China and Vietnam.

• Minimum 8 years of working experience with Python, Javascript, and related stacks.
• Experience in designing and deploying end user facing production systems.
• Experience or interest in production and IoT a plus.

The Candidate:

• Degree in Computer Science, IT, Software Engineering or related discipline.
• Meticulous and a team player.
• Proactive with a strong sense of responsibility, personal leadership, empathy for colleagues in different markets and cultural norms, and with a "can do" attitude.
• Strong interpersonal and communication skills.

About ION Mobility

We are pushing the frontiers of what is possible by developing desirable products as clean alternatives for urban users, to alleviate urban air pollution, and to lead the inevitable transition to EVs across Southeast Asia. Our team is constantly pushing the boundaries of innovation and design to create an electric riding experience that doesn't compromise on quality or style.

Join the team to bring about the future of mobility with us today!

You may also email us at [email protected]

Include in your application:

• Your CV, and/or LinkedIn page
• Links to projects or other work which will definitely impress everyone

We are seeking a highly skilled and adaptable L2 Systems Engineer to join our team in Singapore. This role requires comprehensive expertise in IT service delivery management, system and application support, and infrastructure monitoring across Windows and Linux environments.

The ideal candidate will thrive in a dynamic environment, capable of handling 24/7 shifts encompassing night, morning, and afternoon schedules

Responsibilities:

• Provide round-the-clock technical support, managing Windows Server 2012 R2 / 2016 / 2019 and Red Hat Linux servers, ensuring seamless operation across diverse environments.
• Execute active directory user and group management, including roles, permissions, and application deployments.
• Administer VMware infrastructure, including VMware ESXi and vCenter, ensuring optimal performance and availability.
• Conduct patch updates and system maintenance on Windows and Red Hat Linux servers, adhering to strict maintenance schedules.
• Monitor and troubleshoot IT infrastructure components, promptly addressing any issues to minimize downtime.

24/7 Support: Be available for flexible hours and support to maintain 24/7 server environments on weekends .

Requirements:

• Bachelor's degree in Computer Science or related field.
• Minimum of 6 years of professional experience in IT support services delivery.
• Extensive knowledge of Windows and Linux operating systems, with proficiency in UNIX, Solaris, Red Hat, CentOS, and Windows Server.
• Hands-on experience with virtualization technologies, including VMware vSphere and Oracle VM VirtualBox.
• Strong scripting skills using Bash Shell Script, with proficiency in automation and orchestration.
• Familiarity with database administration, particularly MySQL and Oracle.
• Expertise in ITSM tools such as ServiceNow, Cherwell Service Management, and JIRA Service Management.
• Proven track record in managing IT infrastructure, security, and project delivery execution, with specific experience in Government Private Cloud (GPC) operations.( must have )

NTT DATA, a global leader in digital business and IT services, offers a thriving environment for career growth and excellence. Recognized as a "Top Employer 2023" in multiple countries, NTT DATA's commitment to talent acquisition, values, and ethics creates an outstanding workplace. With a diverse community of over 140,000 innovators worldwide, competitive benefits, and a focus on innovation,

NTT DATA empowers employees to drive transformation in cloud, data, and applications. This is an opportunity to join a culture of collaboration, and impactful contributions, whether you're an experienced professional or a recent graduate, on a journey toward a more connected and sustainable future.

COLLECTION, UTILIZATION, AND DISCLOSURE OF PERSONAL DATA: NTT DATA will assess and evaluate your suitability for employment, appointment, or continued engagement within any position within our organization.

Our client is an SI

Responsibilities

• Support and Maintenance of Alliance Messaging Hub (AMH), SWIFT Alliance Access (SAA), SWIFT Alliance Gateway (SAG), Swift net Link (SNL) and hardware Security Module (HSM).
• Troubleshooting the messages and process the user’s message.
• Working on monthly maintenance changes and updating the SWIFT system with security patches and annual upgrades.

Engaged in Implementation of Standard Release projects each year.

• Help the Users/Clients in SR Projects
  on-boarding client back office applications with SWIFT interfaces
• Addressing the BAU user queries on the status of the message and NACK reason and the various other issues related to swift format.
• Engaged with Documentations and generation of MTTM for each Incident we face for the application
• Engaged in setting up the communication channels i.e WebSphere MQ, creating MQHA message partners, defining routing rules and keywords to facilitate movement of the messages through proper authenticated process.
• Working knowledge of Change Management and Incident Management tool like BMC Remedy,

Project Management Skills:

• Active participant for priority incidents, change requests and disaster recovery management
• Currently using JIRA and confluence efficiently for each project.

Chin, Soo Fatt

sf.chin[at]jondavidsongroup.com

JonDavidson Pte Ltd

Co. Reg. No. 200709068N. Licence No. 22S1412

Registration Number: R21100141

"Personal data collected will be used for recruitment purposes only"

Job Description & Responsibilities:

• Develop conceptual & detailed M&E system design, prepare tender documents, and manage projects
• Assist in project implementation
• Attend meetings and liaise with stakeholders (Clients, Architects, etc..) whenever necessary
• Ensure statutory compliance and quality of work

Job Requirement:

• Good interpersonal and communication skills
• Able to work independently, self-motivated, and resourceful
• Degree in Mechanical / Electrical / Building Services Engineering
• Fresh Graduate are welcome to apply
• Salary commensurate with qualification and experience

We regret to inform that only shortlisted candidates will be notified.

Job Description:

- Integrate and install auto-mechanical/ electrical/ electronic sub-components/robot/equipment according to process instructions

- Carry out calibration/acceptance test on sub-systems/robot/vehicle/equipment according to process instructions

- Perform functional checks, setting, testing, fault finding and failure analysis

- Service and troubleshoot of Auto-mechanical / Electronics / Electrical control system

- Perform troubleshooting and fault analysis on Hydraulic/Pneumatic/ Electronics/ Electrical system

Job Requirements:

- Diploma in Mechatronics/ Electronics/ Electrical/ Robotics & Smart Systems or related discipline

- Basic understanding of electrical/electronic circuit

- Experience in establishing machine comms interface like RS/CAN/ Modbus/ TCP-IP will be an added advantage

- Able to perform analytical and diagnostics with measuring equipment like Digital Meter & Scope

Job Responsibilities:

• Purchasing and coordination of underground services plan
• Underground services detection and submission for NCE approval
• Coordination between sub-contractors and construction team on excavation works, services diversion, and reinstatement works
• Provide update of the progress of works in the construction site
• Any other ad-hoc duties as assigned

Requirements:

• Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Land Surveying, Civil Engineering
• At least 2 years of Site and office survey working experience
• Exposed to instrumentation engineering
• Good hand-on experience with surveying software and applications such as AutoCAD and Microsoft Office
• Good communication and interpersonal skills
• No experience / entry level are welcome to apply

Responsibilities

• Utilize Autocad and Sketchup to create floor plans, detailed drawings, and 3D renderings

• Office administration work

• Perform any other ad-hoc duties by the Manager/Management.

Requirement

• Minimum diploma in Design or equivalent.

• Good communication skills, meticulous, able to multi-task and work in a team or independently.

• Proficient in AutoCAD, Sketchup, and Microsoft Office.

Singaporean or PR based in Singapore only.

Salary will commensurate according to experience & qualifications.

We regret that only shortlisted candidates will be contacted.

Key Responsibilities:

Shipments:

● Shipping / Logistics - Arrangements and follow-up on incoming / outgoing shipment, locally and internationally.

● Documentation – Preparation of Shipping documents, request forms, shipping invoices, customs declaration documentations, etc.

Inventory Management:

● Inventory Management and shipment around the South Asia Pacific, Japan and Korea region.

● Ensure inventory listing is updated and communicated with the team through Microsoft

SharePoint

Event Management:

● Manage Marketing activities roll-out for the Singapore Market, working in collaboration with

Regional MPM and RMS.

● Handle Purchase Requisitions for Manpower / Marketing activities support purposes.

Administration:

● Weekly consolidation of upcoming Webinar invitation into eDM templates.

● Updating the A.Com website to ensure new webinars and events are included on a weekly basis.

● Consolidate monthly marketing reports from Marketing Program Managers (MPM) for reporting

to SAJK Marketing Director.

● Generate monthly expense overview report for Marcom Manager to keep track of the team’s

budget allocation and invoicing status. Keep track of the Team’s Blanket POs (BPO) for key

projects and work with agencies to ensure invoicing is done on time.

● Generation of Monthly Budget Report

● Update SAJK Sharepoint site, including the events calendar on a weekly basis.

● General Invoicing

● Ad Hoc administration as required

Systems Knowledge:

Experience in handling platforms such as:

SAP CRM

ARIBA

Microsoft SharePoint

Education : Diploma in Business or equivalent combination of education and working experience.

Responsibilities

· Coordinate preparation and execution of overhauling of rotating equipment during turnarounds, emergency shutdowns and equipment breakdowns.

· Support Condition Monitoring program (viz. vibration monitoring, oil analysis etc.)

· Provide technical support during project execution for rotating equipment e.g. pumps, compressor, steam turbine and etc.

· Assist in identification of scope and budget for turnaround jobs on rotating equipment.

· Responsible for ensuring availability of spares and manpower required for overhauling of rotating equipment during turnarounds, emergency shutdowns and plant breakdown.

· Take lead in coordinating the site activities on rotating equipment during turnaround.

· Participate in scope challenge workshops and provide advice on technical issues related to rotating equipment.

· Carry out / Support Root cause Failure Analysis of rotating equipment

· Take ownership of the current Reliability Centred Maintenance (RCM) programs optimize the Preventive and Predictive maintenance activities.

· Improve the overall mean time between Failure (MTBF) of plant machinery

· Responsible for ensuring the preventive maintenance program for rotating equipment is complied with.

· Coordinate with contractor and ensure the quality of the job on rotating equipment.

· Coordinate overhaul of equipment with workshops.

· Conduct technical evaluation of rotating equipment vendors for minor and major projects.

· Carry out inspection during construction & commissioning of rotating equipment for minor and major projects.

Requirements

· Diploma or bachelor’s degree in mechanical engineering.

· At least 2 years’ experience in process industry.

· Must have led the overhaul of steam turbines, compressors and pumps.

· Should be good in coordination with vendors and contractors.

· Must have used SAP or other software’s for Planning of resources for maintenance work on rotating equipment.

· Must possess thorough knowledge of rotating equipment internals.

· Must be able to work under pressure and for longer durations in emergencies.

· Working knowledge of industrial codes and standards is desirable

To apply, please visit to www.gmprecruit.com and search for Job Code: 23132.

To find out more about this opportunity, please contact Lionel Liew at [email protected].

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Lionel Liew | Registration No: R1330693

up to 4.5k

Taiseng

Develop business of the company's solutions/products to increase overseas sales

• Maintain and network with distributors and customers to maintain the accounts, promote and expand accounts

• Be efficient in negotiating the terms, price, delivery and specification with distributors about agreement or each sales contract, watch deliveries and close sales

• Understand solutions the company offers, ranging from basic to advanced full research grade microscope systems, develop, execute sales and marketing strategy

• Support distributors in a timely manner, make visits overseas customers when necessary.

• Get involved in product launches and work on strategy, plans and execute them

• Do demonstration and presentation of our solutions

• Manage credit control of distributors

• Manage sales data, make analysis, regular reporting to Management

How to Apply:
Ready to be part of the healthcare revolution? Send your resume to [email protected] or telegram @jocelynchan and be a pioneer in shaping the future of healthcare. Your Next Chapter in Healthcare Begins Here

Jocelyn Chan| Consultant | Recruit Express Pte Ltd (Healthcare & Lifescience)
Company EA Licence number : 99C4599
Personnel EA License: R1331820

Administrative Assistant

Salary range: $2000 - $3000
Work location: Sengkang
Working Days: 5.5 Days [Alternate Saturday]
Working Hours: 9am - 6pm // 9am - 1pm

Job Description:

• Job co-ordination and scheduling of work
• Preparing of quotation and invoices
• Liaise with external clients
• Ad-hoc duties as assigned

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

About Us

MoneyHero Group (Nasdaq: MNY) is a market leading financial products platform in Greater Southeast Asia, reaching 9.8m monthly unique users and working with more than 270 commercial partners across five markets including Singapore, Hong Kong S.A.R., Philippines, Taiwan, and Malaysia.

We make code changes following the deployment process called Trunk Based Development. Combined with a strong focus on CI/CD this approach enables us to make small, isolated changes frequently. Our goal is to deploy changes to production as soon as they are ready, rather than bundle them up into a bigger, riskier release. Because of this, we are able to deploy to production dozens of times a day, even on a Friday. We follow Agile practises, with our teams mostly running either Kanban or Scrum.

Tech wise, we are pragmatic and will choose the most appropriate technologies for a given task. We largely lean towards a Java microservices architecture on the back end, with federated graphql API layer and Kafka event bus used for inter-service communication. On the front end, we primarily use React/NextJs (SSR/SSG) with Tailwind. We also utilize other CMSs, tools, and libraries where they make sense to help us build performant web pages. Infrastructure wise, we believe strongly in infrastructure as code, we manage everything through Terraform and use AWS. Our services are containerised with docker and orchestrated with Kubernetes

What We Offer

You will be entitled to a competitive salary and attractive benefits, including:

• Annual leave, birthday leave, tenure leave, international remote work leave, and more
• Five-day work week, hybrid work arrangement
• Professional trainings, career advancement and internal mobility opportunities
• Competitive benefits including insurance and mental wellness program

About the Job

You will work closely with the Group Head of Engineering (GHoE) and fellow Engineers, collaborate on building a new, high caliber development team responsible for all core technology build out (all stack tiers) for the MoneyHero Group platforms to be deployed in markets across Asia.

The Head of Engineering will be responsible for:

• Leading the execution on the implementation of all core tech
• Sharing the responsibility for recruiting and managing all core engineering staff as well as a pool of contractor resource
• Collaborating on all key architecture decisions, and contribute to our technology roadmap
• Engaging with GHoE and company leadership to ensure relevance of an evolving technology road map

In this role, we are looking for someone with:

• Bachelors / Masters in Computer Science (or related)
• Good exposure to a wide range of popular frameworks and tools across front and back end dev (10+ Years Commercial Experience)
• Broad range of exposure to modern persistence tech (relational, nosql, distributed cache)
• Experienced in modern cloud stacks (AWS, Azure..), container tech (Docker, Kubernetes) & Devops
• Experience managing mid-size engineering teams
• Collaborative by nature and outcome focused
• Experienced in developing & owning consumer facing e-commerce tech (web / mobile web / app)
• Experience in microservice style architecture highly desirable
• Passionate about experimenting with technology and honing their coding craft
• Excellent verbal and written communication skills

Good to have:

• Have hands-on software engineering and coding experience
• Functional understanding of Cloud Technologies like k8s, terraform, AWS services
• Experienced in system design
• Experienced in preparing Technology roadmaps for teams
• Experienced in managing stakeholders at various levels throughout the organization
• Experienced Manager of medium size multi-disciplinary team

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.


Responsibilities:

• Manage enterprise systems, emphasizing cyber security, and troubleshoot reported issues
• Coordinate with technology vendors for necessary escalations and conduct patching and updates for tools and systems
• Generate incident reports, maintain records of service level agreements for customers, and upkeep detailed technical documentation

Requirements:

• Extensive background in Operations Support
• Proficient in McAfee, Cisco, Microsoft, and Thales
• Ability to manage and execute projects in endpoint security, data loss prevention, and vulnerability management

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg


Interested Applicants
Please WA Bryan Tay @ 97559161
Shortlisted Candidates will be notified

Bryan Tay Reg No. R23112463
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

WHO WE ARE:

PALO IT is a global innovation consultancy and Agile software development company dedicated to helping organizations embrace tech as a force for good. We work with clients to rapidly launch products and services, create new business models, and prepare leadership and culture for the future. We are a community of innovators, designers and technologists across 11 offices and five continents (France, Hong Kong, Singapore, Thailand, Australia, Mexico and Colombia).

We're committed to helping businesses transform to better our world. We're proud to be a World Economic Forum (WEF) New Champion, and a B Corp-certified company in Singapore and Hong Kong, currently working towards certification across all other locations.

YOUR ROLE:

As the Head of DevSecOps, Cloud, and SRE, you will lead teams of consultants, driving both strategic and operational excellence in our technology department. Your role is pivotal in shaping our future technological landscape, especially in the realms of DevSecOps, Cloud, and Site Reliability Engineering, with an emerging focus on AI integration.

YOUR RESPONSIBILITIES:

Strategic Leadership:

• Develop and execute a dynamic technology strategy that aligns with the organization's growth, focusing on emerging trends and technologies. Be visionary in exploring emerging technologies that can be integrated in our delivery life cycle.

Team Unification and Development:

• Manage and nurture the talent within the DevSecOps & Cloud and SRE teams. Foster a culture of high performance and continuous skill development, ensuring our team remains market-relevant and excels in delivering quality services.

Collaboration and Alignment:

• Work closely with the CIO, CTO, Business Teams, Marketing, and the broader Management Team to ensure technology strategies are well-integrated with company-wide goals. Your role is crucial in harmonizing technological initiatives with business objectives.

External Representation:

• Act as a key ambassador for our company in external forums and events related to your domain of expertise. Your thought leadership will enhance our brand presence in the technology community.

Budget and Resource Management:

• Oversee budget and resource allocation for the DevSecOps & Cloud and SRE teams. Your decisions will directly impact the efficiency and effectiveness of our technology operations.

Innovation and R&D:

• Lead innovation and research and development initiatives. Your role involves exploring new areas and defining cutting-edge projects that prevent technological stagnation and promote growth.

WHO YOU ARE:

A creative individual with deep technological expertise, business acumen, and a software development background with at least 12-15 years in IT industry, with substantial experience in a leadership role within a high-growth tech environment. Familiarity with Agile methodologies is essential.

Technical Acumen:

• Expertise in Core Areas: You have an extensive understanding of DevSecOps, Cloud technologies, and SRE principles, with significant hands-on experience in multi-cloud environments (both private and public clouds). Your expertise encompasses distributed systems, cloud security, performance optimization, and cloud cost optimization.
• Design and Automation Skills: Proven experience in designing enterprise-grade, Cloud-native architectures and executing efficient CI/CD automations. Your approach should be focused on creating scalable and resilient systems.
• Tech Trend Tracker: A constant drive to explore new technologies in DevSecOps, Cloud, and SRE, aiming to enhance delivery cycles and boost operations and system reliability.

Leadership:

• Strong managerial skills, with a proven track record of scaling, building and leading high-performing teams (minimum 25 people). Ability to maintain a people-centric culture while driving outstanding performance.

Visionary Mindset:

• Demonstrated ability to stay ahead of technology trends and effectively integrate them into business strategies. High entrepreneurial spirit and ability to operate independently.

Communication and Representation:

• Excellent communication skills for both internal collaboration and external representation, where you can balance idealism and pragmatism. A history of effective participation in industry forums and events is a bonus point.

MORE ABOUT PALO IT:

As innovators, we're committed to helping businesses transform to better our world. On that same token, we’re also committed to transforming ourselves. There are massive implications for ESG in the tech sector and in the industries that we serve, and it is our goal to together build products, services and business models that provide both business value and positive impact. With 2025 as our horizon, we are taking action to meet the following objectives:

• Become a climate net-zero company
• Attain 50% of revenue from projects with a positive impact
• Train 100% of our workforce on impact
• Achieve B Corp certification across offices worldwide
• Continuously measure and improve employee happiness

Our clients (https://www.palo-it.com/en/case-study) are amongst the world's most successful companies. We innovate with both established Fortune 1000s, SMEs and start-ups who aim to make an impact, become global leaders and address the world's most complex challenges.

WHAT WE OFFER:

• Stimulating working environments
• Unique career path
• International mobility
• Internal R&D projects
• Knowledge sharing
• Personalized training

For more on our team culture and benefits in Singapore, check out our careers page (https://www.palo-it.com/en-sg/careers)

PALO IT Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Palo IT SG does not discriminate in employment opportunities or practices on the basis of race, colour, religion, sex, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Palo-IT.

Your personal data will be processed for the purposes of managing Palo-IT’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.palo-it.com/en/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

ALATAS Crane Services Worldwide is a worldwide operating crane & deck machinery service specialist and offers crane and hydraulic related services and parts supply in the Ship, Offshore, and Construction industry.

Our specialized Crane Service Technicians are professionals in their field and are available attend to crane problems throughout the world.

As a member of our projects department, and to support our filed service operations, we are employing a Crane Technician as follows:

• Full time position based in Singapore at our client’s facility.
• Working alongside the maintenance engineer to conduct routine maintenance of rail mounted, rubber mounted and ship to shore cranes.
• The scope of work includes but not limited to:

- Gearbox and hydraulic oil change out

- Brake adjustment

- Oil and air filter change out

- Component greasing

- Bolt torquing

- Crane testing and commissioning

• Site specific and on the job training will be provided.

REQUIREMENTS:

• Minimum 1 years’ experience in similar role working with heavy machinery in ports, shipyards or heavy industry.
• Good knowledge and solid hands-on experience with front end maintenance of heavy machinery.
• Own transport to allow for travel to and from site.
• Willing to work as part of a team under the instruction of the maintenance engineer.
• Highly motivated individual
• Singaporeans Only

Job Responsibilities:

• Source and identify suppliers for direct/indirect materials/services to expand supplier base and for new project/production needs;
• Obtain quotes from newly source suppliers to provide costing and cost reduction;
• Lead in conducting periodic price negotiation with suppliers to ensure competency in cost for materials/service;
• Develop and negotiate favorably supply agreement with suppliers;
• Work with Engineering/Unit Sales to analysis Sales Contract’s scope of supply and provided Sales Contract BOM Cost to Management;
• Support in providing Project Costing;
• Other ad-hoc duties as assigned.

Requirements:

• Diploma or Degree in Mechanical Engineer/HVAC in or equivalent;
• Proficiency in both written and spoken in English and Mandarin as to liaise with relevant Mandarin speaking counterparts;
• Excellent organization problem solving and negotiation skills.