Key Responsibilities:

• Provide sustaining Engineering support to CNC machinery assembly process
• Support manufacturing/assembly process improvement
• Support failure analysis and cost reduction through value engineering activities
• Support all process validation activities
• Design and prepare the necessary fixture/toolings for production usage purpose
• Setup and maintain Bill of Material (BOM) and process routing in SAP
• Prepare process manual and check sheet for production usage
• Support engineering activities to improve manufacturing operation key performance indicators such as quality, waste, efficiency
• Maintain and ensure systems and procedures are in compliance with ISO, Regulatory and housekeeping requirements
• Plan and execute activities with other department to ensure common goals are met
• Performs design and development engineering assignments related to activities for equipment and systems layouts in plant and production facilities.
• Support new product introduction (NPI) and product transfer to China/India
• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Job Requirements:

• Diploma / Degree in Mechanical / Manufacturing Engineering or related discipline
• Proficiency in Microsoft Word, Excel, PowerPoint
• Proficiency in Solidworks, SAP, SQL, Share Points, DWG Editor is a plus.
• Able to lead, motivated, driven and good communication skills
• A team player with a sense of responsibility and urgency
• Good interpersonal and communication skills.
• Experience in CNC Machinery assembly process and automation will be advantageous
• Experience in fixture/jig design, hands on and new technology introduction will be advantageous

Who You Are

You are a self-motivated team player with the ability to easily network in an international and cross-cultural environment, working in line with Alfa Laval drivers; Action, Interaction, and Satisfaction. You are driven and see solutions rather than problems, effectively prioritizing and executing tasks. A focus on continuous improvement is in your DNA. You build trust, by clear communication with no prestige.

If the above sounds like you, this position might be just what you’re looking for!

About The Job

Help customers with technical operating issues by carrying out troubleshooting and field service requests submitted through the International Marine Service Desk. The International Service Engineers for Water, Wind & Fuel Systems will provide technical support for the Alfa Laval Boiler System.

Job Description

Follow to all safety procedures and promptly report any unsafe practices or incidents.

• Perform planned service, commissioning, and troubleshooting for Alfa Laval systems on board vessels, including Ballast Water Treatment (PureBallast), High-Speed Separators (HSS), Fuel Conditioning Modules (FCM), Freshwater Generators (FWG), and other equipment.
• Prepare for service jobs by following the Standard Operating Procedures (SOP) to ensure efficient execution.
• Travel domestically and internationally to service jobs on board vessels, with the potential to sail with the vessel if required.
• Execute maintenance, repair, advanced troubleshooting, commissioning or other related services onboard.
• Communicate effectively with customers in English to ensure clear understanding and satisfaction.
• Document all work performed, and conclusions drawn while on board, and ensure that service reports are signed by the customer.
• Identify potential improvements, including sales leads, and provide advice to customers, passing relevant information to the organization.
• Contribute to the development and improvement of Standard Operating Procedures (SOPs).
• Provide formal training to peers and customers, assist in developing of training material and content.
• Proactively seek central support through ServiceNow or direct networking contacts and share findings with the team to keep colleagues informed.
• Be available to respond to emergency service requests, providing timely technical support to minimize vessel downtime.

Main Competencies

Decisiveness & Execution

• Be solution driven and focus on achieving results and ensure that key objectives are met.
• Take responsibility for actions with a ‘can-do’ attitude.
• Influence events actively and make tough decisions when required.
• Identify urgent decisions and make decisions under pressure.
• Take calculated risks on the basis of adequate information and analysis.

Customer focus

• Put the customers first and be eager to please them in line with company standards.
• Go out of the way to ensure that individual customer needs are met.

What You Know

• High school diploma or higher, bachelor’s degree or similar in Marine Engineering a plus.
• 5+ years field service experience on board vessels familiarity with industry regulations and standards, as well as marine mechanical and electrical systems.
• Fluent in English, both verbal and written.
• Good cross-cultural communication skills.
• Experience from working in an international context and across borders with colleagues and customers from other cultures.
• Good reporting skills. (using MS Word and Excel)
• Experience of working in CRM systems and planning tools.
• Understanding of marine separators, ballast treatment systems with electrical, mechanical and automation knowledge.

What’s In It For You

We offer a challenging position in an open and friendly environment where we help each other to develop and create value. Your work will have a true impact on Alfa Laval’s future success.

Responsibilties:

• Reviews technical specifications, drawings, procedures, and standard pertaining to the project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents & weekly updated drawing register from document controller and distributes to project QA personnel
• Administers the project internal quality audit to ensure compliance with the project quality plan
• Monitors the inspection and documentation activities of QA Inspector to ensure complain with inspection test plan and project quality requirements
• Oversees the daily assigned project mechanical and HVAC related construction works and review the daily inspection
• Oversees the assigned inspectors work performance and make sure the completions of tasks are as per the project plans and schedules
• Deploys QA inspectors for project inspection activities
• Liaises with Owner and class pertaining to quality related issues and technical and technical calibrations and queries
• Handles and resolves quality related issues arising from sub-contractor and in-house production
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department, and vendors
• Reports non-conformance and issue Improvement note, where necessary
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor’s Degree in Naval Architecture / Marine and Offshore / Mechanical Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Description:

The Prototype Machine Project Engineer is responsible for overseeing the entire process of building new prototype machines, from initial design transfer to final production handoff. This role requires managing various aspects of the project, including material procurement, troubleshooting, and team supervision, to ensure that prototypes are met the required quality standards, completed on schedule, and transfer efficiently to production.

You will work closely with R&D, technicians, and the quality control (QC) department to ensure a smooth transition from design to prototype and ultimately to full-scale production. Additionally, the role involves monitoring material costs and ensuring effective collaboration between teams.

This position requires strong project management skills, technical expertise in prototyping and manufacturing processes, and the ability to coordinate cross-functional teams to achieve project goals.

Responsibilities:

• Manage material delivery before prototype
• Diagnose and troubleshoot prototype machine
• Manage material cost for prototype and production
• Transfer R&D design to prototype
• Supervise Technicians during Assembly
• Transfer Completed Prototypes to Production

Requirements:

• Diploma / Degree in Mechanical / Manufacturing Engineering or Equivalent
• At least 2 years of experience in project management, preferably in a machine tool company or engineering environment.
• Proficient in Microsoft Word, Excel and PowerPoint
• Work Independently and ability to diagnose and resolve problems.
• Hands-on experience with machine.
• Good time management, pro-active, self-motivated and high sense of responsibility.

Masstron Pte Ltd is a dynamic and innovative company committed to excellence in production and quality assurance. We are seeking a dedicated and detail-oriented Assistant QA/QC Engineer to join our team and contribute to our commitment to delivering top-notch products and services.

Job Description:As an Assistant QA/QC Engineer, you will play a crucial role in ensuring the quality and compliance of our products throughout the production assembly phase. You will assist the QA/QC Manager with progressive quality checks, final inspections, and work closely with our customers' quality teams for factory acceptance tests and handover processes. Your responsibilities will also include fronting customer audits and implementing robust quality management systems within the company.

Key Responsibilities:

• Assist the QA/QC Manager in conducting progressive quality checks during the production assembly phase.
• Perform final quality checks before product delivery.
• Collaborate with customer quality teams for factory acceptance tests and handover tests.
• Front customer audits and address any quality-related concerns.
• Implement and maintain quality management systems to ensure compliance with industry standards.
• Conduct root cause analysis and develop corrective actions for quality issues.
• Prepare and maintain quality documentation, reports, and records.
• Provide training and support to production staff on quality standards and best practices.
• Stay updated on industry trends and regulatory requirements to continuously improve quality processes.

Requirements:

• Diploma in Engineering, Quality Assurance, or a related field.
• Strong knowledge of quality control standards and methodologies.
• Excellent problem-solving skills and attention to detail.
• Ability to work collaboratively with cross-functional teams.
• Strong communication and interpersonal skills.
• Proficiency in using quality inspection tools and software.

What We Offer:

• Opportunities for professional development and growth.
• A supportive and collaborative work environment.
• The chance to make a significant impact on our company's success.

Primary Responsibilities:

• Identify and solve engineering problems as needed
• Support manufacturing/assembly process improvement
• Responsible to uphold electrical safety standards and ensure regulatory compliance

Job Descriptions:

• Prepare and update process check sheets and manuals
• Troubleshoot technical issues and optimize system performance as needed
• Provide technical guidance and mentor Technicians
• Conduct and prepare root analysis and part defect report
• Work with Internal parties and vendor to prevent recurrence
• Liaise with R&D department for engineering change request
• Pre-inspection/inspection on MTC’s Quality Issues
• Prepare electrical inspection test sheet for test and measurement
• Evaluate and implement corrective measure on test result
• Ensure adherence to design specifications, quality standards, and safety protocols
• To carry out or perform tasks / activities, prepare and submit necessary reports to Superior from time to time

Job Requirements:

• Degree/Diploma in Electrical Engineering or equivalent
• Min 3 years experience in machine tool or automation environment
• Experience in CNC Machinery assembly process and automation will be advantageous
• A team player with a sense of responsibility and urgency
• Good interpersonal and communication skills

Energy Engineer

12-month contract

About the Company:

Our client is a US healthcare and a leading global biopharmaceutical company. They have a revenue of US $40.1 billion, with more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission

About the Role:

In this role, you will support the site energy sustainability program and introduce good energy management practices to improve energy efficiency and reduce environmental impact. The program shall be in alignment with the global energy conservation program and Singapore Energy Act. Support site to analyze energy efficiency opportunities, leverage expertise and manage projects to implement improvements.

Besides, you will support Engineering Services to meet profit plan targets, optimize cost effectiveness, and lower utility operation in accordance with cGMP and Safety guidelines, with emphasis on reliable and stable operation.

Critical Responsibilities but not limited to:

Cost Transformation and Energy Management

• Support cost transformation for utilities program. Will be the project owner, ensuring projects are implemented on schedule, validated in accordance to commitment and accuracy of reports. Conduct analysis; identify risks and proposal for mitigation and to report out to the governance committee.
• Support the site energy efficiency program and introduce good energy management practices to improve energy efficiency and reduce environmental impact. The program shall be in alignment with the global energy conservation program and Singapore Energy Act. Support site to analyze energy efficiency opportunities, leverage expertise and drive projects to implement improvements.
• Support the site energy conservation program with all stakeholders to ensure site wide consistency in energy awareness, energy conservation and active participation in our site energy conservation program
• Support the computerized energy monitoring system for the site to drive efficiency and sustainability
• Support the development of annual and long-term strategic energy capital projects to ensure continuous energy efficiency improvement and energy conservation sustainability, in alignment with the site’s energy policies.
• Provide expertise in conducting energy audit, evaluating options and providing solutions
• Promote energy efficiency program for the company to ensure high level of awareness by all employees in energy usage and energy efficiency in equipment operation
• Network with the energy subject matter experts from other sites, the Global Energy Team, other Pharma Energy Improvement team and the government to recommend proven or new energy savings program and initiatives and continuously seek new energy conservation technologies with subject matter experts
• Monitor and analyze key performance indices and take mitigation actions to ensure objectives are met and where appropriate to escalate

Engineering Services Support

• Coordinate with GES on site process engineering design, construction and equipment validation activities when appropriate
• Supports Energy Lead – Engineering to develop Profit Plan forecast, execute activities to meet production, cost effectiveness, and cost reduction targets
• Any other tasks as and when assigned by Energy Lead

Management of Maintenance, Utilities & Facilities

• Support utility / process / system energy efficiency program – compilation of data, analysis of data and recommendation to stakeholders to reduce wastage or find alternative energy efficient methodology
• Collaborate with maintenance and utilities managers to ensure all equipment have an effective PM or predictive program to ensure all equipment are in high energy efficiency operations
• Support the development of system and program to track energy conservation projects, cost savings from new initiatives and prepare stretch goal for each year to reduce cost of energy for the site
• Prepare utility budgets, monitor actual billing spending and track energy conservation projects against this budget. Analyze and report out risk and mitigation plans.
• Coordinate the implementation of energy projects with utilities operation with least impact to manufacturing

Management of Capital Plans & Projects

• Recommend energy efficient process, system or proven equipment to Project Engineers in their capital planning process or in their capital procurement plan
• Coordinate and update global energy project planning system to maintain a good energy conservation pipeline for each year and over a 3-5 years period to ensure energy sustainability and reducing site energy consumption levels
• Ensure projects are timely, on budget and completed in compliance to safety and quality
• Due to diversity of the site and the complexity of projects, priority of projects and changes of priority affects the planning process. This position is frequently required to take appropriate decisions and actions to engage stake holders from peer level or next level managers for resolution. For the energy reduction role, he is to analyze, develop projects, prioritize and plan for the resources to complete the projects.

SHE

• Consistently show safety leadership by demonstrating advance understanding of all safety procedures and standards
• Seek opportunities to improve company SHE standards and move company towards goal on injury free workplace & better environment

cGMP Standards

• Consistently demonstrates advanced understanding of the importance of cGMP and WQS standards
• Consistently demonstrates an advanced understanding of the importance of cGMP regulations related to their work and consistently develops and executes appropriate solutions
• Seek opportunities to improve company cGMP standards and move company towards goal of Sustainable Compliance
• Subsystem owner for QMS Chapter 18 – Plant Maintenance Calibration.

Requirements:

• Bachelor’s Degree in Engineering related fields
• Singapore Certified Energy Manager
• At least 5 years’ experience in energy engineering, manufacturing, consultancy or equivalent industry
• Demonstrate leadership behaviour
• Project management expertise to execute large and/or complex projects, work in cross-functional teams to complete projects successfully within budget, schedule and quality requirements.
• Knowledge of applicable regulations and divisional policies/guidelines, especially equipment design, equipment qualification, preventive maintenance, and calibration.
• Demonstrated capability in vendor service contracts management & knowledge of our System Life Cycle Methodology.
• Understands maintenance programs and requirements (reliability-centred, preventative, predictive).
• Stewardship awareness, including cGMP, regulatory inspection preparation, and SHE.

Reg No: R22104540

EA License no: 94C3609

Job Responsibilites

• Prepare Master Program and update progress monthly.
• Prepare Progress forecast of rolling programs and update of resources.
• Resolve any instrumentation issues & recording.
• Coordinate with services department about diversion work and schedule.
• Ensure overall site progress are updated according to schedule.
• Prepare monthly progress report for client/consultants.
• Assist Project Manager in the preparation and submission of verified work done to Quantity Surveyor.
• Any other adhoc duties as assigned by management.

Job Requirements

• Possess a Degree Civil Engineering and above or equivalent.
• At least 5 years of experience in construction planning and programme coordination for railway projects.
• Computer literate with proficiency in planning software such as Microsoft Project, AutoCAD, P6 Primavera.
• Experience in LTA Projects will be advantage.
• Willing to be based at project site office and work 5.5 days.

Job Description:

• To assist the QA engineer for developing and constantly improve on the Quality Management (QM) System and ensure compliance to quality lntemational Standards.
• To assist in managing and ensuring that system and controls of the QM System are working efficiently and effectively.
• Inspections of projects/components to review and maintain quality standards and requirements for the Company.
• Responsible for manufacturing Quality Assurance as well as Incoming, In-Process and Outgoing Quality operations.
• To assist in preparing inspection reports as per customers' requirements.
• To assist in managing day to day internal quality issues and non-conformity disposition.
• To assist in reviewing, coordinate and follow up in corrective and preventive actions.
• Prepare be MR for ISO900I and lSOl400l.
• Responsible for developing and overseeing the implementation of the Quality Control Plan.
• Responsible for the controlled documents such as Quality Management System Manual, customer drawing, standard, specification etc.
• Monitoring of all works performed by suppliers / cuntractors to ensure that quality works are produced.
• Maintain measuring equipment, gauges and welding machines are calibrated and record.
• Review of various document such as WPS, SAN, PQR, WQT, PRC and PCP prior to production welding.
• Perform inspection before welding such as part preparation, welding machine setting; preheat temperature and other relevant parameters in line with the applicable approved WPS.
• lnspect after welding to ensure parts welded as per drawing / customer's requirement and no welding defect.
• Perform NDT inspection on welded parts accordance to drawing specification.

Requirement:

• Able to read technical drawings
• 5 years working experience in same industry
• 5 and half working day per week
• Willing to work at Tuas South area

Job descriptions :

1. Work on SoC/Subsystem define and integration.
2. Work on IP developments, Perform Verilog/System Verilog RTL design to meet product specifications and requirements；
3. Work with SW Engineer and HW Engineer on all aspect of SoC to optimise Silicon and board level design;
4. Work on SoC system block development, e.g., power management, clock/reset, system register, test control, PinMux, etc;
5. Work on SoC floorplan with APR and HW Team; SoC timing constraints and review support; SoC DFT support; SoC verification plan and SoC verification support
6. Post silicon Debug and support.

Job requirements:

· Bachelor's or Master's degree in electronic engineering with more than 5 years ASIC design experience.

· Experience with ASIC design flow

· Experience in RTL coding, RTL and gate-level simulation, logic synthesis, static timing analysis, timing closure and verification

· Experience in video processing and video analytics is a plus

· Experience in USB/SDMMC/DDR IP is a plus.

· Experience in Functional Safety, automotive certification is a plus.

· Passionate and strong in general programming is a plus

· Good understanding of DFT

· Familiar with UNIX/ Linux environment and scriptiing

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

What we offer:

• Competitive salary package
• Medical insurance (including dental)
• Annual Health Screening
• Company trip & teambuilding activities

We are looking for a Plant & Machinery (Mechanical / Electrical) Engineer for:

Metal shredder & non – ferrous separation / Vezanni Shear

Waste Wood To Energy Plant

Responsibilities:

• Responsible for ensuring highest possible uptime and availability for mechanical equipment in the scrap processing plant.
• Responsible for reliability is highest possible and where needed facilities / perform root cause investigations to increase reliability and general performance of equipment.
• Ensure incident free and reliable operation, including timely and proper maintenance of systems.
• Responsible for implementing Maintenance Excellence by aligning with International Best Practice on mechanical equipment.
• Ensure future maintenance activities are proactively planned, prepared and scheduled with the required level of equipment integrity and reliability.
• Ensure liaison with production team and other stakeholders to stay updated on the on-going maintenance activities.
• Ensure equipment documentation and Preventive Maintenance (PM) procedure are constantly updated.
• Ensure technical, environmental and safety aspects in all matters is assessed in compliance with Health and Safety regulations.

Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree, Master's Degree in Engineering (Electrical/Electronic), Engineering (Mechanical) or equivalent.
• Required language(s): Mandarin, English (in order to liaise with the Mandarin speaking associates)
• At least 5 Year(s) of working experience in the related field is required for this position.
• Required knowledge: hydraulic system, rotating parts, PLC system, Conveyor belts
• Preferably Senior Executive specialized in Engineering - Mechanical/Automotive or equivalent.

Job Description:

1. Design, build, and deploy back/front end software applications using C# and Typescript (or JS).
2. Employ LINQ for data interaction and process optimization.
3. Oversee Microsoft SQL databases, carry out SQL programming tasks, and enhance system performance.
4. Engage in all stages of the Software Development Life Cycle (SDLC), including requirement gathering, design, coding, testing, deployment, and maintenance.

Responsibilities:

• To achieve R&D development goals in order to fulfill business needs and support company’s growth.
• Proactively provide engineering support and solutions to relevant department such as manufacturing, customer service, sales, application
• Adhere strictly to job process defined by Makino's QEHS policy Engineering to achieve and comply to Makino quality standard
• Contribute to improve Makino technical core competency through continuous learning and innovation
• Share knowledge with relevant people to help create a knowledge bank and learning organization
• Independently and proactively develop and validate new unique engineering designs
• Mentor and guide junior Engineers/Technical Officers

Requirements:

• Bachelor’s Degree in Computer Science, Information Technology or Mechatronics or equivalent
• Demonstrable experience (at least 2 years) in software development.
• Profound knowledge of C#, LINQ, and Angular. Experience with Microsoft SQL database programming using Entity Framework & SignalR.
• Acquaintance with the Software Development Life Cycle (SDLC).
• Familiarity with OPC-UA and Industrial 4.0 technologies is advantageous.
• Exceptional problem-solving abilities and meticulous attention to detail.
• Excellent communication skills and a strong team player.

We are seeking talented R&D Engineer to assist with the design and customization of our new/existing Vertical milling machine portfolio. In this role, you will be working closely with the R&D team to create functional design concepts, validate designs, and follow through from design stage to production.

Responsibilities:

• Developing new products and introducing innovative designs for our existing product series.
• Crafting customized machines to meet the unique needs of our diverse customers.
• Nurturing collaboration across various company departments, including Sales, Marketing, Product Management, Production, Supply Chain, Customer Support, etc.
• Mastering the art of designing rigid, high-accuracy structural parts, as well as lightweight components for rapid, high-acceleration applications, working hand-in-hand with our Simulation and Test Engineers.
• Pioneering the development of mechatronic units, integrating Pneumatic, Hydraulic, Servo-electric, and Sensor components to create seamless machine systems.
• Engaging in Concept Design, Structural Simulation, Detailing, Prototyping, Testing, Production, Customer Support, and Monitoring machine performance at our clients' sites.
• Leveraging our dedicated R&D Lab for innovative prototyping.
• Enjoying mentorship from seasoned senior engineers, guiding you on your career path to success.
• Embracing a global perspective by collaborating with an extensive network of Makino R&Ds, Sales Regions, and Key Suppliers.

Requirements:

• Bachelor's Degree in Mechanical Engineering from a reputable university.
• Passion for Product design.
• Excellent Problem-solving skills and able to work hands-on.
• Effective team player who is creative, meticulous, independent and responsible.
• Familiar in 3D modelling software such as SolidWorks and Simulation tools will be an advantage.

Main Responsibilities

• Research & Development for machine tool products and technologies (CNC Milling Machines and it’s Automation)
• Development of Customized Machines for our customers.
• Collaboration with main company departments from Sales, Marketing, Product-Management, Production, Supply-Chain, Customer-Support and Controlling.
• Design of rigid and high-accuracy structural parts as well as lightweight-parts for fast, high-acceleration-applications in teamwork with Simulation- and Test-Engineers.
• Design of mechatronic-units with pneumatic, hydraulic, servo-electric and sensor components.
• Involvement in Concept-Design, Structural-Simulation, Detailing, Prototyping, Testing, Production, Customer-Support and Surveillance of machine-performance at our customers.
• Strong guidance by experienced senior-engineers along the career-path.
• Collaboration with extensive global network of Makino R&Ds, Sales-Regions and Key-Suppliers.

Job Requirements:

• Degree in Mechanical Engineering from reputable University
• Strong interest in product-design for the production-environment as key-enabler for many innovative products.
• Creativity for innovative solutions as well as strong analytical skills
• Minimum of 2 years of experience in mechanical design
• Good time management, pro-active, self-motivated and high sense of responsibility.

Responsibilities:

• Assist in planning, executing, and coordinating construction tasks according to the master and detailed work schedules.
• Prepare and submit essential project documents such as timelines, method statements, design plans, risk evaluations, and monthly updates.
• Oversee construction work to ensure it adheres to contract terms, drawings, quality standards, and Environmental, Safety & Health (ESH) guidelines.
• Collaborate with Clients, Authorities, Consultants, Subcontractors, and Suppliers on all aspects of the project, providing solutions and ensuring proper documentation.
• Coordinate with clients and consultants for site inspections, submit technical reports, and maintain accurate site records. Assist the QS department in reviewing contractor claims and progress payments.
• Attend meetings with Clients, Consultants, and Contractors to monitor project timelines and ensure progress is on track.
• Maintain an organized document control system, reviewing detailed design drawings and project specifications.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 2 years of working experience in the construction and infrastructure industry.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Purpose

This position is responsible in ensuring the efficient operation of the hotel property and all its equipment, ancillary maintenance and repair services and protection of the Owner's asset.  Structural aspects of the hotel as well as the maintenance of grounds and external facilities fall within the span of responsibility of the Chief Engineer.

Primary Responsibilities

Operation

• Conduct daily briefings and ensure that all pertinent information is well received by team members

• Supervise and manage daily activities of the department

• Ensure that all team members are properly trained and have the tools and equipment needed to effectively carry out their respective job duties

• Educate/train team members on current safety issues to ensure compliance with all local laws and safety regulations

• Work with Design and Construction team, engineers, and/or outside architects regarding renovations and other such projects; contact contractors for bids and meet with appropriate construction supervisors

• Supervise the maintenance and of repair the interior and exterior of buildings, hotel rooms and contents

• Ensure the execution and achievement of the hotel's preventive maintenance program

• Establish and maintain procedures with regards to the security and replenishment of the hotel’s inventory and assets, such as (not limited to) tools, supplies, equipment, furniture, televisions etc.

• May be responsible for determining the security requirements necessary to ensure that hotel property, employees, guests and patrons are protected against theft, crime, and other hazards, and/or manage the relationship with a third party security firm contracted for such purposes

• Monitor budget and control expenses within all areas of the department

• Participate in the preparation of the annual departmental operating budget and financial

Team Management

• Plan for future staffing needs

• Interview, select and recruit team members

• Identify and develop team members with potential. Mentor and train appropriate employees for upward growth

• Conduct performance review with the team

• Constantly monitor team members’ appearance, attitude and degree of professionalism

• Develop, conduct maintain all staff training programs for team members, focusing on their development needs, providing them with new skills to meet the changing needs of the business

• Prepare weekly staff schedules keeping in mind anticipated business, operating budgets and standards of service

• Prepare payroll and gratuity reports

• Conduct monthly departmental meetings to provide information to team members, obtain their feedback, rectify operation issues and provide a regular forum for department communication

Other Responsibilities

• Be fully conversant with hotel fire & life safety/emergency procedures
• Comply with hotel and department policies and procedures at all times
• Attend all briefings, meetings and trainings as assigned by management
• Report for duty on time wearing clean and complete uniform at all times
• Maintain a high standard of personal appearance and hygiene at all times
• Perform other reasonable duties assigned by the Management of the Hotel

Supporting the Mechanical maintenance team, you will be responsible for the effective maintenance plant and equipment to achieve high reliability and availability in accordance with statutory, regulatory and safety requirement.

Responsibilities

• Perform scheduled plant inspection according to maintenance regime as well as ensuring that our gas plant, auxiliaries and common systems are maintained according to SOPs, and in compliance with regulations and requirements and in a safe manner.
• Coordination of all Mechanical Maintenance programmes (PM & CM)
• Manage and optimize all planned plant/equipment maintenance activities during minor and major overhauls and inspections.
• Responsible for the functional tests and analyse the failures related to mechanical systems and components and recommends corrective actions to prevent re-occurrence. Troubleshooting of faults/defects issues & carry out failure analysis.
• Study, evaluate and implement plant improvement projects to enhance overall plant reliability, availability and performance
• Execute approved plant improvement works
• Supervision of maintenance contract works and prepare work procedures for all maintenance activities
• Prepare technical specifications for equipment parts and work services. Manage the procurement of parts and services to meet the maintenance needs
• Track the year to date expenditure against the approved department budget
• Manage a team effectively through day-to-day activities.

Requirements

• Degree in Mechanical Engineering or equivalent recognized by the Professional Engineers Board.
• At least 5 years of relevant working experience in plant maintenance from the Power or Oil and Gas industries.
• Sound Mechanical engineering maintenance knowledge. Good knowledge of safety and statutory requirement will be an advantage.
• Self-motivated team player with analytical mind, strong planning and problem solving skills.
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

We are looking for a Plant & Machinery (Mechanical / Electrical) Engineer for:

Metal shredder & non – ferrous separation / Vezanni Shear

Waste Wood To Energy Plant

Responsibilities:

• Responsible for ensuring highest possible uptime and availability for mechanical equipment in the scrap processing plant.
• Responsible for reliability is highest possible and where needed facilities / perform root cause investigations to increase reliability and general performance of equipment.
• Ensure incident free and reliable operation, including timely and proper maintenance of systems.
• Responsible for implementing Maintenance Excellence by aligning with International Best Practice on mechanical equipment.
• Ensure future maintenance activities are proactively planned, prepared and scheduled with the required level of equipment integrity and reliability.
• Ensure liaison with production team and other stakeholders to stay updated on the on-going maintenance activities.
• Ensure equipment documentation and Preventive Maintenance (PM) procedure are constantly updated.
• Ensure technical, environmental and safety aspects in all matters is assessed in compliance with Health and Safety regulations.

Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree, Master's Degree in Engineering (Electrical/Electronic), Engineering (Mechanical) or equivalent.
• Required language(s): Mandarin, English (in order to liaise with the Mandarin speaking associates)
• At least 5 Year(s) of working experience in the related field is required for this position.
• Required knowledge: hydraulic system, rotating parts, PLC system, Conveyor belts
• Preferably Senior Executive specialized in Engineering - Mechanical/Automotive or equivalent.

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering or equivalents.
• Miniumum 1 year of working experience in contruction industry.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Define ISP HW Architecture based on product features and performance requirements, also with gate count and power estimation
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team

Requirements

• Minimum MSEE, or BSEE, or equivalent, plus 3+ years of Digital Design and verification related experience
• Experience / knowledge in CMOS Image Sensor and Image Signal Processing (ISP)
• Experience / knowledge in System C/C++, System Verilog, and Catapult HLS tool.
• Strong debugging and problem-solving skills
• Good communication and interpersonal skills
• Result oriented and embrace change behaviours

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Info:

• Salary: Basic up to $3500 + AWS + VB
• Working Hours: Monday - Friday (8:30am - 5:30pm)
• Location: Jurong East

Job Scope:

• To research and develop new products and services
• Research competitors' products and evaluate their detailed functions
• Conduct market research on security systems in the ASEAN region
• Collaborate with Japan HQ R&D and China R&D center for product development
• Survey existing and future infrastructure, including electrical power and telecom networks, to ensure product compatibility
• Provide field technical support by visiting clients to check and maintain CCTV surveillance systems
• Assist in obtaining technical certifications for new and existing products in various countries
• Design and develop test plans for security alarm systems, CCTV systems, and access control systems, adhering to industry standards
• Perform rigorous testing of system components such as control panels, sensors, cameras, access readers, and communication devices
• Simulate real-world security scenarios to identify and address potential vulnerabilities
• Maintain detailed test records and reports for future reference
• Analyze test results, troubleshoot system malfunctions, and document findings
• Collaborate with manufacturers or distributors to resolve issues and optimize system performance
• Provide technical support to internal teams across the ASEAN region
• Conduct in-depth research on emerging security technologies and their potential applications
• Analyze market trends and customer needs to identify opportunities for new product development
• Research standards like SS558, EN, and IEC for ASEAN countries
• Stay updated on the latest advancements in security technologies and testing methodologies

Requirements:

• Minimum qualification Diploma in Electronics
• Minimum of 2 years of experience in security system testing, preferably with exposure to alarm systems, CCTV systems, and access control systems
• Familiarity with testing methodologies and tools used in security system evaluation
• Strong understanding of electronic security principles and operation of various security system components
• Proficiency in basic IT knowledge is required
• Proficiency in technical documentation and reporting
• Ability to conduct presentation for internal customers and management
• Entry level with relevant internship experience is welcome

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Responsibilities:

• Able to read mechanical drawings, electrical drawings and electronics schematic diagrams/ wiring diagrams
• Work closely with the project team to ensure specifications are met
• Site-coordination and drawings verification where required
• Responsible for machine integration
• System installation, integration and testing
• Software Development - Design and develop control software for automation equipment
• Continuous improvements on existing and new software
• Work closely with the project team to ensure specifications are met
• Perform other ad-hoc duties as assigned by superiors

Requirements:

• Nitec/Diploma/Degree in Electonics/Mechatronics /Mechanical/Computer Engineering or equivalent
• Experience in designing and developing applications using programming language (Python, C++, Java, etc.)
• Good communication and interpersonal skills.
• Independent and good team player
• Able to read mechanical drawings, electrical drawings, electronics schematic diagrams / wiring diagrams

1. Preparing Work Instruction for Designers.
2. Discussing and Analyzing problems that arise during Design.
3. Preparing Piping MTO
4. Providing technical support to the team.
5. Planning and Scheduling work activities for the piping team.
6. Reviewing Vendor drawings, Interdisciplinary item checking.
7. Observational Skills.
8. Analytical Skills.
9. Project Management Skills.
10. Written and Verbal Communication Skills.
11. Drafting Skills

• Analyse the Authority’s data needs and document the requirements.
• Refine data collection/consumption by migrating data collection to more efficient channels.
• Plan, design and implement data engineering jobs and reporting solutions to meet the analytical needs.
• Develop test plan and scripts for system testing, support user acceptance testing.
• Work with the Authority’s technical teams to ensure smooth deployment and adoption of new solution.
• Ensure the smooth operations and service level of IT solutions.
• Support production issues.
• Good understanding and completion of projects using waterfall/Agile methodology.
• Hands-on experience in DevOps deployment and data virtualisation tools like Denodo will be preferred.
• Understanding of reporting or visualization tool like SAP BO and Tableau is important.
• Track record in implementing systems using Hive, Impala and Cloudera Data Platform will be preferred.
• Hands-on experience in big data engineering jobs using Python, Pyspark, Linux, and ETL tools like Informatica.
• Strong SQL and data modelling and data analysis skills.
• Good understanding of analytics and data warehouse implementations.
• Ability to troubleshoot complex issues ranging from system resource to application stack traces.
• Track record in implementing systems with high availability, high performance, high security hosted at various data centres or hybrid cloud environments will be an added advantage.