Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Responsibilities

• Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
• Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
• Establish process parameters for a variety of semiconductor equipment to ensure line stability
• Evaluation and development of new equipment/materials/process

Qualifications

• Minimum requirement of a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering and Physics
• Demonstrated experience of at least 2 years in semiconductor foundry module process
• 22/28 nanometer and below advance technology nodes experience is highly desirable
• Strong understanding of process development, optimization and troubleshooting.
• Proven leadership skills in leading cross-functional teams and managing projects related to process improvement or technology transfer
• Ability to analyze complex process issues, identify root causes, and implement effective solutions
• Experience skills including SPC, 8D reporting, DOE, FMEA and PMO is preferred
• Able to commit shift work

• Marine Civil Engineering
• Basic $3000 + $6000
• 5.5 days (8am-5pm/12pm)
• Office: Bukit Batok
• Working location: Project based

Responsibilities:

• Coordinate maintenance activities for facilities and equipment to ensure optimal performance and minimal downtime.
• Ensure machinery and equipment (e.g., gensets, excavators) operate effectively to meet production needs.
• Manage tasks and resources across maintenance and logistics teams to achieve operational targets.
• Enforce safety measures during operations and address challenges to maintain efficiency.
• Lead daily tasks, including reporting and issue resolution.

Requirements:

• Diploma in mechanical engineering or related.
• 1-3 years of experience with excavators, heavy machinery, and equipment.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R1873990 | Lucky Lee Ding Cong

• Marine Civil Engineering
• Basic $4000 + $6000
• 5.5 days (8am-5pm/12pm)
• Office: Bukit Batok
• Working location: Project based

Responsibilities:

• Plan construction schedules and coordinate activities to meet project timelines.
• Monitor and report on-site and off-site progress, preparing regular updates for consultants and clients.
• Analyze project specifications and drawings, including civil/structural, architectural, and M&E details.
• Supervise construction activities, ensuring safety compliance and maintaining a clean work environment.
• Organize site inspections, toolbox meetings, and safety briefings with relevant personnel.
• Attend meetings with clients and prepare necessary submissions (e.g., RFIs, MS, RA, SWP, shop drawings).
• Maintain project documentation and ensure compliance with ISO standards.

Requirements:

• Diploma / Bachelor’s degree in Civil Engineering.
• 1-3 years of experience in infrastructural or marine construction.
• Preferred experience in dredging, reclamation, or nearshore construction.
• Knowledge of construction methods, materials, and BCA regulations.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R1873990 | Lucky Lee Ding Cong

• Prepare and give technical presentations to explain to customers how the products and services work.
• Work with the customers and Engineers to ensure the equipment meets the system requirements.
• Communicate with the sales team to understand consumer demands and offer sales support where necessary.
• Secure orders, guarantee product standards and assure product delivery.
• Establish customer rapport and acceptance.
• Plan for modifications to products to meet consumer demands.
• Help clients to solve problems with product usage.
• Recommend new and improved products to the customers and explain how the equipment will be more cost-effective.

Fabrica AI Full time Electrical Engineer - Invention of Automatic Tile Grouting Robots

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your role would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. The following tracks are available:

Core responsibilities:

• PCB, electronics design
  • Working with both hobbyist and industrial microcontrollers, single board computers, motor drivers etc.
  • Integrating motor systems of different types (DC, BLDC, with encoder feedback…), sensor modules etc.
  • PCB design
• Embedded programming

Possible additional responsibilities:

• Testing our robot on construction sites
• Managing external PCB production
• Harness design
• Overseeing a team doing all the above

Requirements:

• Experience with electronics design and embedded software at at least one industrial level project
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup more than having a stable job at a reputable company
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back on the envelope calculations
• Keenness to do more than is expected, impact driven, past side projects
• Excited about robotics and similar technical areas and exploring them in work and other projects
• Growth mindset driven

Our development process is very iterative and agile. Thus your role/tasks is/are likely to evolve over time. You would play a significant part in deciding how your work would contribute to our overall goals. If you like this process, you’d be a good fit for us.

Check out the link above for more information, and send your CV to [email protected]

Office Location : Tai Seng

Working hours : Monday to Friday | 8am to 6pm | Saturday 8am to 12pm

Salary (commensurate with experience) : Up to $5,000 + Variable Bonus + Annual Leaves + Medical Benefits

Industry : Construction Sector - A&A / Building Works

Job Description

•Check and analysis drawings, authority requirements and tender specifications

•Check site installation whether it is in accordance to design and standards

•Oversee the projects, ensure compliance of contracts and the drawings with regulatory specifications.

•Able to coordinate with owners, architects, consultants, project managers, sub-contractors and suppliers.

•Attend meetings with architects and consultants

•Other ad-hoc duties as assigned

Job Requirements: Possess at least diploma in Electrical Engineering and Mechanical Engineering (M&E) or equivalent

•However, entry level are encouraged to apply, from recognized University by Singapore PE Board as training will be provided.

•Good operational planning for construction projects

•Good in communication and written abilities

•Required skill: Able to use Microsoft Project to present schedule to the client

•Knowledge in Construction and Renovation.

•Skills required: Autocad

Maxhunt Resource Pte Ltd | EA Licence: 22C1322
Loh Wing Sheng | Registration No: R22110239

• Electrical Supply (MNC company)
• Basic $3000 - $3500
• *AWS + Bonus + 14 days AL
• Mon-Fri (8.15am-5.45pm)
• Working location: Tuas
• Company transport provided: CCK, Bukit Batok, Boon Lay

Responsibilities

• Inspect and test incoming and outgoing parts according to established procedures and maintain quality records.
• Report quality issues to the QA Manager and relevant department heads, ensuring non-conforming products are separated.
• Authorize the rejection of unsatisfactory parts and approve the release of conforming parts for delivery.
• Perform routine factory tests on switchboards and oversee testing and commissioning on-site or aboard vessels.
• Assist in achieving quality objectives, recommend solutions for issues, and verify their implementation.
• Ensure safety compliance, proper calibration of instruments, and maintain good housekeeping in the QA Department.

Requirements

• Min ITE/ Diploma in Electrical Engineering

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

Key Responsibilities:

• Design, develop, and maintain scalable cloud-native applications using .Net Core (C#), Web API, and modern technologies
• Build seamless front-end experiences with Reactjs, Nextjs, and integrate with back-end services
• Develop data access layers using Entity Framework Core and integrate with PostgreSQL and AWS Redshift databases
• Deploy, monitor, and manage applications on cloud platforms (AWS, Azure), utilizing services like Lambda, API Gateway, S3, and CloudWatch
• Develop and maintain containerized applications using AWS EKS or Openshift
• Collaborate with cross-functional teams to design, develop, and ship new features
• Ensure high-performance, quality, and responsiveness of applications
• Maintain code quality through reviews, unit tests, and best practices
• Troubleshoot, debug, and upgrade existing software
• Stay current with emerging technologies to improve efficiency and scalability

Requirements:

• Education: Degree in Computer Science, Information Technology, or related field
• Technical Experience:
  • .Net Core (C#) and Web API
  • Entity Framework Core
  • Nextjs, Reactjs, and Nodejs
  • Database experience (Postgres, AWS Redshift)
  • Cloud-native app development (AWS/Azure preferred)
  • Container platforms (AWS EKS, Openshift)
• Nice to Have: Familiarity with Python

We regret to share that only shortlisted candidates will be notified.

www.dadaconsultants.com

Data provided is for recruitment purposes only

EA Registration Number: R21102607

Business Registration Number: 201735941W

Licence Number: 18S9037

We're seeking a skilled Engineer, Quality Assurance to join our team in Singapore. Reporting to the Engineering Manager, you'll play a critical role in ensuring the quality assurance aspects of our technical areas.

Key Responsibilities

• Participate in our shift-left testing process and entire Software Testing Life Cycle (STLC) to ensure high-quality products.
• Collaborate with Product Managers to define, test, and validate product requirements.
• Design, execute, and automate tests for web applications and backend APIs, ensuring comprehensive coverage.
• Produce detailed test reports and serve as the sign-off authority for feature releases.
• Work closely with Development teams to identify and resolve issues, ensuring seamless collaboration.
• Contribute to the evaluation and adoption of testing automation frameworks.
• Mentor junior QA engineers, sharing expertise and promoting growth.

Essential Qualifications

• Bachelor's or Master's degree in Computer Science or a related field.
• Excellent communication skills, with the ability to explain technical concepts to diverse audiences.
• 2-5 years of experience in web application testing and automation.
• Strong foundation in Software Engineering concepts and STLC life cycle.
• Ability to write test plans and test strategy documents.
• Good knowledge of API and Web testing, Networking, and Operating System concepts.
• Strong troubleshooting, debugging, and analytical skills.

Preferred Qualifications

• Experience with testing automation tools.
• Background working in product companies.

We regret to share that only shortlisted candidates will be notified.

www.dadaconsultants.com

Data provided is for recruitment purposes only

EA Registration Number: R21102607

Business Registration Number: 201735941W

Licence Number: 18S9037

About Cynapse

Cynapse is an awarded AI Software Product company specializing in Enterprise-grade Vision AI in highly challenging environments. cynapse’s software platform is leveraging cutting-edge cloud/on-premise/edge platforms, advanced computer vision algorithms, advanced ML concepts & models, and more.

The company Headquarter is located in Singapore (one-north Area)

Job Description

Cynapse is looking for a talented and highly motivated Computer Vision & Machine Learning Developer to join our AI team that delivers a challenging, enterprise-scale Video Content Analytics solutions to global customers. You will conform to high standards of design and coding, working in a cutting-edge, dynamic and professionally challenging environment.

Responsibilities

• Assist in the development and training of computer vision models using state-of-the-art machine learning techniques.
• Work with large datasets for model training.
• Collaborate with engineers to implement and fine-tune models, focusing on performance, accuracy, and scalability.
• Contribute to the deployment and monitoring of trained models in production environments, ensuring robustness and reliability.
• Participate in the development and maintenance of MLOps pipelines, automating the process of model training, deployment, and monitoring.
• Conduct research to explore and implement the latest computer vision and MLOps techniques and technologies.
• Maintain and update model pipelines, ensuring they meet project requirements and deadlines.

Qualifications

• Bachelor’s degree in Computer Science, Data Science, Artificial intelligence, Mathematic, Electrical Engineering, or a related field.
• Solid understanding of machine learning concepts, particularly neural networks and their applications in computer vision (e.g., convolutional neural networks, transfer learning, and deep learning architectures).
• Proficient in one or more popular machine learning frameworks such as TensorFlow, PyTorch, or similar.
• Experienced with computer vision libraries like OpenCV, scikit-image, or equivalent.
• Strong programming skills in Python, with expertise in using tools like NumPy, Pandas, and Matplotlib for data manipulation and visualization.
• Knowledge of data preprocessing techniques, including image augmentation, normalization, and resizing.
• Basic understanding of MLOps practices, including version control, continuous integration, and continuous deployment (CI/CD).
• Strong analytical and problem-solving skills with attention to detail.
• Good communication skills, both written and verbal, with the ability to work collaboratively in a team environment.
• Eagerness to learn and adapt to new tools and technologies in the rapidly evolving fields of machine learning, computer vision, and MLOps.
• (Optional) Experience with cloud platforms like AWS, GCP, or Azure is a plus.
• (Optional) Knowledge of Docker or other containerization tools for model deployment.
• (Optional) Familiarity with MLOps tools like MLflow, Kubeflow, or similar is a plus.

Personal Competencies

• Innovative, motivated and a quick learner
• Ability to work well in a small team and take end-to-end ownership of problems and their resolution
• Attention to detail, curiosity, and passion for technology

Benefits

• Competitive base salary and a generous stock option package
• Unique opportunity to work with a talented global team on cutting edge technologies
• informal and exciting work environment with flexible hours

Due to the nature of the role, the position is considered for candidates that are only based in Singapore

Job Type: Full-time

Benefits:

• Health insurance

Schedule:

• Monday to Friday

Supplemental Pay:

• 13th month salary

Work Location: In person

Product area

Google's network provides services to millions of Internet users around the world. Our metros are on the edge of our network where Google connects to its users. The Network Team is responsible for operating that network reliably and at scale. Our team owns the full life cycle of all space, power, and network assets in all of Google’s data centers and metro points of presence globally. From the foundation, we are involved from site acquisition to construction and are accountable for what space and power is delivered. We're involved in every facet of network delivery from architecture and design to installation, configuration, activation, and commissioning.

Job description

As a Network Implementation Engineer, you will be the initial point of our efforts to execute deployment, maintenance, and operations of private data networks worldwide. You will work with Technical Program Managers, Network Engineers, Design and Infrastructure Engineers, Field Engineers within Google, as well as construction and telecommunications vendors and contractors, all to position your team and organization for success.

You will facilitate faster, better, and more efficient, positive outcomes for the business and our customers. Your objective will be to build the world’s most reliable, cost-effective and scalable network to support all of our current and future customers and users globally.

Qualifications

Job responsibilities

• Build and operate Google's network reliably and at scale.
• Primary focus will be delivering Infrastructure capacity for APAC region.
• Responsibilities include design, planning, and installation support for optical transport.
• Beyond day-to-day responsibilities, you'll also work with more senior engineers to develop creative approaches for keeping operational costs low through tooling and process improvements.

Minimum qualifications

• Bachelor's degree in Network Engineering or Telecom Engineering, a related technical field, or equivalent practical experience.
• 3 years of experience in Dense Wavelength Division Multiplexing (DWDM) or Transmission Control Protocol/Internet Protocol (TCP/IP) or system design operations methodology.

Preferred qualifications

• Experience in Troubleshooting of DWDM systems and topology and architecture.
• Knowledge of fiber types and their application; physical fiber characteristics; and standard testing tools Optical Spectrum Analyzer (OSA), Bit Error Rate Test (BERT), Optical Time Domain Reflectometer (OTDR).
• Understanding of networking and fundamentals of network troubleshooting at Layer1.
• Understanding of network transport design, equipment and infrastructure.
• Excellent written and verbal communication skills.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 3 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Candidates with no prior working experience are welcome to apply.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D/Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design.
• Min. 5 years of experience in CMOS Analog IC design and simulation.
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent).
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Key Responsibilities:

• Design power supply hardware (and/or embedded firmware) for various switching mode power converters (PFC, Flyback, Forward, Buck, Boost, Resonant topologies including LLC, series resonant, and Synchronous Rectification), ranging from 1,000W to 22,000W, for on-board/off-board charger.
• Theoretical analysis of concepts (calculation and simulation).
• Practical and detailed evaluation of all types of power circuits.
• Enhance and improve circuit performances such as Efficiency and Reliability.
• System design with creation 2D models and design 3D together with ME team.
• Schematic creation and PCB design support.
• As project key person to start from concept to mass production stage.
• Implement design for manufacturing and design for automation. DFx.
• Patent and technology creation, defining new power requirements.

Key Requirements:

• BSc, MSc, PhD, or researcher with Min. 5 years’ experience.
• Experience with EV chargers and onboard chargers (OBC) is a plus.
• Familiar with power measurement equipment.
• With solid technical know-how on the transformer, power Mosfet, PWM controller, and synchronous rectifier circuits.
• Understand the application of PID controllers and control loop analysis.
• Knowledge of EMC/IEC/UL/EN standards.
• Experience in schematic and PCB layout designs.

SALARY:

Junior - ($4,200-$5,000)

Senior - ($5,000-$6,000)

LOCATION:

Ang Mo Kio / Yio Chu Kang / Central

Job Description

•Manage & Lead the electrical team.

•Perform engineering duties such as design, engineering calculations, planning, tender.

Preparation/evaluations as part of the engineering project team

•Team development

•QA/QC documentation review of engineering deliverables

•Liaison with clients, project managers, architects, contractors

•Resolve any technical problems faced during project design and/or construction stages

•Suggests ways to increase revenues and efficiency.

•Testing & Commissioning of the ACMV Electrical Systems.

•Ensure the team follows all electrical codes and standards.

Job Requirements

•Any qualification in a relevant engineering field with minimum 5 years of related working experience

in the Construction Electrical Field associated with ACMV / Electrical.

•Engineering design of commercial buildings, major infrastructure transportation projects and

mixed-use developments

•Possess design experience and good understanding of ACMV / Electrical technical systems and

procedures:

•Possess knowledge on all cabling, loading and sizing calculations and equipment selections such as

cable, generators, panels, etc.

•Develop, design through establishing, design briefs, design reports, calculations, schematics,

schedules, specifications, concept, Preliminary, Detailed and Construction Engineering Designs

•Productions of drawings and developing models

•Site Experience, Testing & Commissioning Experience

•Having experience working with Infrastructure Projects would be an added advantage.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

EA Personnel.: Chan Jun Wei

EA Registered no.: R1543992

Recruit Now Singapore Pte Ltd

EA License no.: 21C0845

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D/Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 8 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Key Responsibilities:

• Create application design by working with technical leads and architects.
• Create and maintain high-quality Design documentation.
• Produce code with established design principles including static and dynamic code analysis.
• Proactively learn related architectural components including Databases, Message Broker\Contribute to deployment activities including Dockerization, CI/CD pipelines.
• Collaborate in a multi-cultural team.

Requirements:

• 5+ years of experience in Cloud Application development.
• Strong programming knowledge in one or more programming languages – preferably in Python / Golang / Java.

1. Able to produce a clear and maintainable codebase. Knowledge of clean coding practices such as S.O.L.I.D is essential.
2. Demonstrate skills in unit testing and appreciate the benefits of test suites.

• Demonstrate knowledge of REST API best practices and design guidelines.

1. Strong skill set in one or more REST API frameworks – such as Spring Boot, FAST API, and Flask.
2. Expected to know the performance, deployment, and security considerations of REST API

• Highly desirable to have GraphQL experience supporting Frontend applications.
• Hands-on experience in one or more relational Database systems – preferably in PostgreSQL.

1. Demonstrate ability to independently design Schema, usage of ORM tools, and write plain SQL.

• Working knowledge of event-driven architecture and experience in one or more Message Brokers, preferably Kafka.
• Essential to know the fundamentals of containerized applications.
• Able to work by integrating design with other teams even with insufficient/partial information.
• Desirable to have a working knowledge of public cloud infrastructure, preferably in AWS.

Key Responsibilities:

• Design power supply hardware for various switching mode power converters (3-phase Vienna Rectifier, NPC, PFC, Flyback, Forward, Buck, Boost, Resonant topologies, and Synchronous Rectification), ranging from 1,000W to 22,000W.
• Design on-board charger requirement, compact and high-power density requirement.
• Design to meet functional safety and reliability standards. For automotive grade.
• Theoretical analysis of concepts (calculation and simulation).
• Practical and detailed evaluation of all types of power circuits.
• Enhance and improve circuit performances such as Efficiency and Reliability.
• Creation of 3D/2D models, assembly drawings, PCB, and schematic designs.
• Support firmware development using various DSP/MCU platforms.
• As project key person to start from concept to mass production stage.
• Implement design for manufacturing and design for automation. DFx.
• Patent and technology creation, defining new power requirements.
• Electrical and Firmware architectures (lead and support).

Key Requirements:

• BSc, MSc, PhD, or researcher with Min. 8 years experience.
• Experience with EV chargers and onboard chargers (OBC) is a plus.
• Familiar with power measurement equipment.
• With solid technical know-how on the transformer, power Mosfet, PWM controller, and synchronous rectifier circuits.
• Understand the application of PID controllers and control loop analysis.
• Knowledge of EMC/IEC/UL/EN standards.
• Experience in PCB schematic and layout designs.

Office Location : Tai Seng

Working hours : Monday to Friday | 8am to 6pm | Saturday 8am to 12pm

Salary (commensurate with experience) : Up to $5,000 + Variable Bonus + Annual Leaves + Medical Benefits

Industry : Construction Sector - A&A / Building Works

Job Description

•Check and analysis drawings, authority requirements and tender specifications

•Check site installation whether it is in accordance to design and standards

•Oversee the projects, ensure compliance of contracts and the drawings with regulatory specifications.

•Able to coordinate with owners, architects, consultants, project managers, sub-contractors and suppliers.

•Attend meetings with architects and consultants

•Other ad-hoc duties as assigned

Job Requirements: Possess at least diploma in Electrical Engineering and Mechanical Engineering (M&E) or equivalent

•However, entry level are encouraged to apply, from recognized University by Singapore PE Board as training will be provided.

•Good operational planning for construction projects

•Good in communication and written abilities

•Required skill: Able to use Microsoft Project to present schedule to the client

•Knowledge in Construction and Renovation.

•Skills required: Autocad

Maxhunt Resource Pte Ltd | EA Licence: 22C1322
Loh Wing Sheng | Registration No: R22110239

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Department of Chemical and Biomolecular Engineering, National University of Singapore, is inviting applications for 1 Research Engineer (RE) position under Associate Professor Sibudjing Kawi’s group. The candidate will work on Shell research project entitled “Integrated Catalytic Plasma and Membrane Design for Low-Temperature High-Value Olefins Production from Light Hydrocarbons”.

Qualifications

Master degree in chemistry/chemical engineering in the area of catalysts, inorganic membranes and inorganic membrane reactors for high temperature reactions.
• Proven experience (with good research track record in terms of publications and/or patents) in the field of inorganic hollow fiber membrane synthesis, catalyst synthesis/characterization/testing for hydrocarbon pyrolysis and catalytic membrane reactor design.
• Strong team player skills and the ability to work harmoniously with a diverse workforce.

Job Summary:

• Provide 1st and 2nd Level IT Support to end-users
• Manage IT assets through procurement, tracking, maintenance, refresh /renewal and disposal/ termination.
• Provide assistance in the implementation of new end-user computing technologies.

Job Scope:

• Design, deploy, and manage security solutions such as firewalls, IDS/IPS, and encryption technologies.
• Conduct security audits, compliance checks such as vulnerability assessments with risk analysis
• Development and enforcement of security policies, procedures and controls
• Integrate security measures into new and existing IT systems and applications.
• Ensure that applications are securely configured, including hardening default settings, securing APIs, and restricting file permissions.
• Conduct initial investigations of security violations/incidents, and escalate as necessary
• Collaborate with other IT teams to ensure security is integrated across all systems and processes.
• Stay updated on the latest security trends & technologies
• Design, deploy, and manage security solutions such as firewalls, IDS/IPS, and encryption technologies.
• Work with other contractors where required for delivery of network services
• Any other IT duties as assigned.

Special Aptitude And Knowledge

• Advanced technical knowledge of security technologies and systems.
• Expertise in firewall administration, encryption technologies, and network protocols.
• Experience in designing and implementing security architectures.
• Proficiency in vulnerability assessment tools and penetration testing methodologies.
• Able to communicate well, handle documentation and explaining network and IT architecture
• A great team player and able to work well with other team member

Qualification

• Recognized Degree in Information Technology, Computer/ Network Engineering or equivalent.
• Possess relevant certifications such as CISSP, CCSP, CEH, or advanced security certifications
• Minimum 5 years of experience in an equivalent role.
• Experience with a company that has achieved CyberTrust Mark certification or has actively worked towards it is a bonus.
• Familiarity with implementing security measures in the healthcare industry is also advantageous.

Product area

In gTech Users and Products (gUP), our mission is to advocate for Google’s users by creating helpful and trusted experiences across the product ecosystem. We achieve this by meeting partners and consumers where they are with support and help, representing their needs with our product partners and proposing fixes and features that elevate their engagement with Google's diverse product ecosystem. Additionally we provide a range of product services that ensure our products are optimized for every user, no matter where they are in the world (e.g., localization, digitization, partner integration and more).

Job description

gTech’s Professional Services team takes a creative, collaborative, and customer-centric approach to provide foundational services and forward-looking business solutions to top advertiser and publisher customers. Through technical implementation, optimization, and key solutions, gTech Professional Services helps customers attain their business goals while building long-term capabilities.

Additional job description

In this role, you will be responsible for the technical relationship of our Distribution partners. You will collaborate with teams in Engineering, Business, and Product Management to use technologies for our internal or external clients/partners. From concept design and testing to data analysis and support, you will own the technical execution and work with business operations to distribute products such as Chrome, Lens, Android apps, and more. You will balance business and partner needs with technical constraints, develop innovative, solutions, and serve as a partner and consultant. You will also build tools and automate processes, oversee the technical execution and business operations of our products, as well as develop product strategy and prioritize projects and resources.

Qualifications

Job responsibilities

• Work with our Product, Engineering, and Partnership teams. Develop solutions, provide consulting services to our partners, build relationships, and know the partner's needs.
• Help partners in their day-to-day challenges by being the subject matter expert, delivering solutions, and troubleshooting their technical issues.
• Propose, design, create, and present proof-of-concept prototypes and demos to a variety of audiences, from engineers to marketing professionals.
• Perform implementation reviews. Advocate for new product features, and provide partner feedback to internal cross-functional teams including Product Management and Engineering.
• Deliver business intelligence. Use internal and external data sources to provide data insights to support decision making.

Minimum qualifications

• Bachelor’s degree in Engineering, Computer Science, a related field, or equivalent practical experience.
• 3 years of experience working with client-side web technologies (e.g., HTML, CSS, JavaScript, or HTTP).
• 3 years of experience coding with one or more programming languages (e.g., Java, C/C++, Python).
• Experience in technical troubleshooting, and managing internal/external partners or customers.

Preferred qualifications

• Master’s degree in Engineering, Computer Science, Business, or a related field.
• 5 years of experience in business intelligence, data analytics, or statistics.
• 5 years of experience working with systems (e.g. Linux, Unix).
• Excellent project management skills and attention to detail.
• Excellent problem-solving and troubleshooting skills.
• Ability to present to the technical level audience.

• Position : Site Engineer - Up to $4,200 - Seletar
• Location : Seletar
• Working hours : 5 Days Work Week – Monday to Friday: 8.30AM to 6.00PM
• Salary (commensurate with experience): Up to $4,200 + Performance Bonus + 14 Days Annual Leave
• Duration : Permanent
• Industry : Aerospace

Responsibilities:

• Create solutions to complex technical problems in life science, Power, water treatment, chemical and petro-chemical, shipyard and oil and gas plants.
• Do field/ bench Calibration of measuring instruments like Pressure, Temperature, Flow, radar level, analyzer, wireless and collect data
• Calculate calibration range, mA, Freq, required output and accuracy before doing calibration and record the result during calibration
• Analyze and compile technical and statistical information and prepare report
• Maintain accurate engineering documents

Requirements:

• Minimum Diploma in Electrical / Electronic / Instrumentation
• Minimum 3 years of relevant experience in the same field
• Knowledge relating to Mechanical and Measuring Instruments
• Technical report writing and able to read the schematic diagrams
• Preferably with Class 3 Driving License
• Bilingual in English & Mandarin to liaise with Chinese associates who can only speak mandarin

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jeslyn Tan

Associate Consulting Director (APAC)

Reg no.: R21101247 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Main Responsibilities:

• Interface with customers on Control System.
• Programming, understand and help customers define their needs.
• Attend all solution related problems on site, troubleshoot and provide technical support to customers as well as resolve technical issues.
• Conduct training to enable users/customers optimizing the graphical user interface.
• Provide necessary testing and debugging to engineering & factory for designing new products/refining existing products.
• Ensure full compliance with all validation issues concerning the product application, controls and documentation.
• Support product warranty claims and quality issue. Update customer complaints system & prepare monthly failure analysis report.
• Actively interact with customers to develop service business to achieve customer satisfaction.
• Collate and maintain project pursuit reports for management’s review and action plan.
• Training and mentorship shall be provided for fresh graduates.

Requirements:

• ITE/ Diploma in Electrical Engineering or equivalent.
• At least 1 years’ experience in similar industry.
• Immediate starter is preferred.
• Possess good communication skill for effective follow-up and attention to details.
• Ability to interact with all levels in a professional & responsive manner.
• Display maturity and able to handle stress.
• Willingness to learn and progress in a fast paced environment.
• Enthusiastic and able to work in a team oriented environment.
• General knowledge of AV products such as Crestron, AMX, QSC, Extron is preferred.
• Other related duties assign by Company from time to time.
• Singapore Citizen or Permanent Resident is preferred.
• Fresh graduates are encourage to apply.

Responsibilities:

• Provide business analysis and process redesign expertise in one or more functional areas (HR, Finance, Transport, Warehouse, Sales etc.) within the enterprise specifically in the analysis and redesign, of SAP and Non-SAP functions and processes.
• Work with business users to identify business requirements and the changes. Assists in the design, coding/configuring and testing of technical solutions of KTC core in-house applications and adheres to coding standards defined by IT.
• Customize SAP functionality to satisfy business requirements and business process design.
• Reviews and edits requirements, specifications, business processes and recommendations related to proposed solution.
• Contribute to corporate decision making by providing accurate, timely and relevant documentation, information and reports appropriate to maintaining awareness of plans and directions of business application systems.
• Liaising with software suppliers on their products and the requirements of business units

Requirements:

• Possess a Degree/Diploma in Computer Science / Information Technology or equivalent.
• Experience in developing, implementing and reviewing business application improvements.
• Must have at least two full lifecycle SAP R/3 implementation experience (Project preparation till go-live).
• Good interpersonal, analytical and problem-solving skills.
• Minimum 2 - 3 years of SAP Implementation experience.