Responsibilities:

• Install, test, commission, and conduct preventive and corrective maintenance (PM & CM) on healthcare equipment/systems.

• Address and resolve recurring issues promptly to ensure consistent customer satisfaction.

• Plan and schedule PM or CM tasks efficiently.

• Provide post-sales support as needed.

• Coordinate with manufacturers, vendors, contractors, and clients for project management.

• Assist the project team in executing projects smoothly.

• Respond promptly to service calls.

• Collaborate with team members to gather feedback and identify prospects.

• Undertake any additional tasks as assigned.

Requirements:

• NITEC/Diploma in Electrical/Electronic/Biomedical Engineering or equivalent.

• Proficient in using software-assisted technical service diagnostic and testing equipment.

• Minimum of 2-3 years' relevant experience preferred; fresh graduates with a keen learning attitude are encouraged to apply.

• Strong interpersonal skills and customer service orientation.

• Good command of English and familiarity with Microsoft Office and IT tools.

• Self-motivated, diligent, and reliable.

• Possession of a valid driving license is advantageous.

• Able to work independently as well as part of a team.

• Fluent in both spoken and written English.

Job Scope

1) Site Survey, planning and proposed routing

2) Preparation and submission of doucment to authorities

3) Liasing with authorities, clients representatives, sub-contractor and consultants.

4) To assist project manager on the day-to-day management of site, including supervising and monitoring the site labour force and the work of any subcontractor.

Requirement

1) Diploma in Engineering ( Civil / Electrical preferred)

2) More than 3 year Experience preferred

3) Good oral and written communication skills in English.

4) Good team player.

5) Own transport preferred

6) Knowledge of CAD is advantage

Job Scope

1) Site Survey, planning and proposed routing

2) Preparation and submission of doucment to authorities

3) Liasing with authorities, clients representatives, sub-contractor and consultants.

4) To assist project manager on the day-to-day management of site, including supervising and monitoring the site labour force and the work of any subcontractor.

Requirement

1) Degree in Engineering ( Civil / Electrical preferred)

2) More than 3 year Experience preferred

3) Good oral and written communication skills in English.

4) Good team player.

5) Own transport preferred

6) Knowledge of CAD is advantage

Job Description

Key Responsibilities

• Develops, implements, and maintains methods, operation sequence and processes in the fabrication of parts, components, sub-assemblies and final assemblies.
• Interfaces with other engineering functions to coordinate the release of product improvements and/or new products. Launches, releases, approves and implements or issues engineering change requests as required to support design engineering and Operations with new and existing products.
• Estimates manufacturing costs, determines time standards and makes recommendations for tooling and process requirements. Uses DFx principles to reduce manufacturing and/or product costs, and improve delivered product quality.
• Develops and uses test procedures, including assisting with the definition of test specifications with design / software engineering. May work with test engineering on the design and development of text fixtures. May assist in the coordination of test fixture sourcing activities.
• Gathers operational and test data and evaluates results; may takes corrective/continuous improvement actions.
• Evaluates work methods, procedures and policies. Participates in the development and maintenance of new and existing business processes; updates as necessary to ensure current practices are documented.
• Determines root cause and corrective action analysis for issues that arise during assembly and/or test of systems; provides failure analysis report as required.
• Performs Process Failure Mode, Effects and Criticality Analysis when working with New Product Development.

Requirements

• Min 3 years of experiences as Manufacturing Engineer in semiconductor/ electronics or engineering industries
• Relevant Engineering qualifications
• Able to work with any levels of stakeholders globally
• Able to attend global meetings of different time zones
• Project management experiences would be an added advantage
• Microsoft excel and Tableau

Work Location

• 8 Upper Changi Road (Bus 2, 5, 37)
• No company transport available

The Role:

In this position, you will provide first-level on-site support for end-user operations within the organization. You’ll be responsible for understanding and managing complex technical issues in a fast-paced business environment. Your key tasks will include maintaining, managing, administering, and operating VMware vSphere and VMware Horizon VDI environments and applications. You will perform daily administrative tasks such as maintenance, upgrades, patches, hotfixes, and security configurations for these environments. Monitoring, alerting, and fine-tuning the VDI environments will also be crucial.

Additionally, you will assess risks associated with virtual machines and VDI applications, conducting contingency planning as needed. Troubleshooting VMware workloads and assisting in the evaluation and recommendation of related hardware, software, and services will be part of your responsibilities. Staying current with developments in virtual machine technologies and providing on-call, 24/7 support on a rotating basis is essential. You will implement corrective measures to resolve production issues and minimize unplanned outages. Creating and maintaining technical documentation will ensure efficient planning and execution, while you will also coordinate with external parties for problem resolution and support special projects as required. Furthermore, you may lead the post-delivery team to manage inventory and maintenance reporting.

Ideal Candidate:

The ideal candidate will possess a strong technical inclination and hands-on experience. Experience supporting enterprise virtualized environments on desktops, operating systems, client applications, and mobile devices will be advantageous. Proficiency in operating systems, particularly Windows Clients/Servers and various Linux distributions (such as Red Hat, CentOS, and Ubuntu), is essential. Familiarity with backup and recovery applications will further enhance your suitability for this role.

· Directs and/or coordinates electronic engineering and/or technical personnel in fabrication and design of testing and test control apparatus and equipment, or software and systems testing.
· Directs and coordinates electronic engineering activities concerned with development, procurement, installation, calibration and maintenanceof instruments, equipment and control devices required to test, telemeter and record test data.
· Determines conditions under which tests are to be conducted and sequences and phases of test operations.
· Conduct and support Validation activities on Test System/Equipment and/or process setup.
· Interfaces and confers with scientific, engineering and technical personnel to resolve testing problems such as product or system malfunctions, incomplete test data, data interpretation or coding issues.
· Analyzes and interprets test data and prepares technical reports for use by electronic or software engineering, and management personnel.
· Develops or uses computer software and hardware to conduct tests on electronic products and systems or software.
· Trains and instructs floor support, test technicians and test operators on test hardware and/or software, as well as proper problem solving techniques.
· Resolves test yield problems by performing analysis of root causes, developing and coordinating corrective action measures and monitoring improvements.
· Coordinate equipment/tester maintenance and repair support as required.
· Contribute to the workplace safety and health improvement for the employees, as well as environmental protection, by adhering to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and targets through participation of EHS programs.
· Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures.

Requirement

· Technical knowledge of PCBA and / or System box build
· Able to read and understand 2D drawings, schematics for components
· PC Literate: Word, Excel, Power Point, AutoCAD etc.
· CAD system basics
· Good technical and commercial communication skills. Excellent verbal and written communication skills.
· Ability to work in a customer oriented environment and work well with all internal functional areas, customers and suppliers.
Good team player

Job Description

SEPPURE is a separation technology company developing novel membrane materials and membrane processes for sustainable chemical separations without the use of heat. SEPPURE is disrupting the energy-intensive chemical separation processes, such as distillation and evaporation, through the introduction of novel chemical-resistant nanofiltration membranes. With up to 15% of the world’s total energy spent on industrial-scale chemical separations, SEPPURE’s sustainable process facilitates decarbonisation by substantially reducing global energy use, emissions, and pollution.

Now, we have an opportunity for Process Engineer based in Singapore.

Roles and Responsibilities

The applicant will join Engineering Team and involve in laboratory work and field piloting.

The applicant will

· Support/lead engineering activities at field piloting such as installation and commissioning of equipment by working closely with customer, contractor, and equipment fabricator.

· Operate field pilot, sampling, and data collection

· Support analytical lab and laboratory testing

· Data analysis and report writing

· Preparing engineering package to customer.

Requirements and Qualifications

· B.Sc., M.S. or equivalent experience in chemical engineering, environmental engineering, or related field.

· Able to handle chemicals, perform HAZOP analysis, and strong safety awareness.

· Good knowledge of problem-solving and project management.

· Strong communication skills and report writing.

· Able to work independently (self-driven) and within a team environment.

· Prior experience in managing piloting site or solvent treatment processes is a plus.

· Fresh graduate is encouraged to apply.

Our Client, a Japanese MNC founded 60 years ago, today with over 15 thousand employees in 27 countries and 56 locations around the world, specializing in equipment, fabrication of integrated circuits, flat panels display and photovoltaic cells for the Semiconductor industry.

Responsibilities:

• Provide highly visible customer support through the performance of on-site installation, as well as overseeing any necessary diagnoses, troubleshooting, service, and repair of complex equipment and systems
• Perform continual improvement programmes, parts overhaul, preventive maintenance, modifications and repair works on equipment
• Serve as company liaison with customers on administrative and technical matters for assigned projects
• Coordinate logistics arrangements with customers on equipment related matters.
• Responding to customers' complaints provides time to solutions to resolve customers' issues
• Monitor the performance of the product, provide regular update reports and feedback on customer's service requests
• Report common complaints of customers to management in order to address the situation for future reference

Requirements:

• Degree/Diploma in Electrical/Electronic/Mechanical/Mechatronics Engineering or its equivalent
• Some relevant experience with semiconductor equipment knowledge
• Strong communication and good interpersonal skills
• A meticulous, organized and resourceful team player
• A highly motivated individual who works independently with little supervision
• Work in cleanroom environment
• Required to work or on standby after office hours/weekend/public holiday

Short Listed Candidates will be Notified & Contacted.

PrimeStaff Management Services Pte Ltd

EA License No.: 95C5411

EA Personnel Reg. No.: R1106591

DUTIES AND RESPONSIBILITIES:

• Experience in Mechanical, Chemical, Gas and etc.
• Reviewing and management of all design documentation for Mechanical system, Chemical & Gas system and Control system.
• Plan and implement Project Management Control
• Able to understand construction shop drawing
• Familiar design calculation with Mechanical (HVAC, Process System and Others)
• Assist Project Manager to plan, and project execution
• Assist Project Manager to determine project budget, project schedule, and scope of work and deploy appropriate staff
• Manages and monitors site progress in project
• Collates analysis drawings, plans, specifications and other documents relating to construction project
• Identifies risks, review and advise in the risk-impact assessments and manages compliance to risk-impact management
• Direct, lead and support other project team in managing and executing multiple tasks and project
• Manages no inn-conformances, corrective and preventive actions process and ensures follow-up within stipulated timelines
• Experience on conducting, inspect and witness of welding & welder qualifications test mechanical test, materials receiving, and NDT testing.
• Able to verify of material requisition and taking-off quantities, site measurement.
• Able to prepare progress payment claim, variation orders and others.
• Develop project reports on a timely basis
• Maintain, manage and document all project reports and statements
• Other related duties, as assigned

Technical Sales Engineer

• Working Hours: Monday-Friday 9am-6pm
• Location: Kaki Bukit
• Salary: $4000-$5000 + VB

Requirements:

• Degree in Electrical, Mechanical or Technical Engineering.
• Must be knowledgeable with products and solutions of PAGA, CCTV, PABX, Fire Alarm systems, PLC/DCS systems, Fire & Gas detection and protection systems, Helideck lightings systems, Weather Monitoring systems, Aids to Navigation systems.
• Proficient in AutoCad drawings.
• Relevant work experience in Shipyard, Oil & Gas, Marine, Petrochemical background preferred.

Job Scope:

• Responsible for developing & maintaining customers’ base
• Technical Sales proposals/quotations and clarifications with customers
• Participates in project bidding - both technical & commercial
• Prepares technical drawings and project documentation & scheduling
• Hands-on product integration, troubleshooting, etc.
• Site (eg onboard vessel) survey, installation & support when required
• Involves in sales and marketing efforts

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Desktop Support Engineer This position provides the desktop support for the first contact point for customers, you will be responsible to provide prompt assistance to customers, addressing a range of IT topics and issues. Besides, you will ensure that software, licenses and operations comply with standards.

Responsibilities Ability to guide the team and resolve incidents escalated by Desktop Support Engineers in confirming the validity of the problem and seeking and researching for known solutions related to these more complex issues.

Performed Desktop Support services to users This includes receiving, prioritizing, documenting and actively resolving end user help requests and escalating incidents when necessary to maintain customer satisfaction and SLA expectations.

Perform imaging/re-imaging Perform asset inventories Perform technical escalation to 3rd party vendor or resolver groups (where appropriate) Updates Incident records Creates and updates work instructions (where necessary) Document standards and procedures (where necessary)

ITE/Diploma graduate with 1 years' experience in desktop support Min 1 year experience in Microsoft Windows 10 and Microsoft Office 365 Clear Spoken & Written English.

Job Description

• Position: Senior Mechanical Design Engineer
• Well Established Marine and Offshore Service Provider
• Working hours: Monday – Friday
• Salary (commensurate with experience): Up to $7,000
• Working Location: Tuas
• Duration: Permanent
• Industry: Marine and Offshore

Main Responsibilities:

• Responsible as the lead for the overall Mechanical engineering project activities.
• Responsible for optimized Mechanical engineering man hour utilization within the project.
• Coordinate between the other trades & internal for engineering integration.
• Coordinate with Project Lead on Project Engineering’s & Procurement Schedule.
• Prepare & Review Equipment Technical Specification based on Owner’s Contractual Requirement, Classification bodies, and all relevant authorities.
• Review Vendors’ Technical Specification/ drawings to ensure completeness & correctness with our requirement.
• Prepare & Review Equipment Parameter & Mandatory Calculation.
• Prepare & Review Piping Schematics (P&ID).
• Prepare & Review Machinery & HVAC Layout, Equipment Installation & Alignment.
• Prepare & Review Mechanical design and construction standard.
• Review 2D and 3D for piping detail and production design.
• Prepare & Review Testing Protocol & Operation Manual.
• Guiding and checking Mechanical engineer activities.

Requirements:

• Bachelor's degree in Mechanical Engineering or a related field.
• Minimum of 5 years of relevant work experience in marine/offshore industry machinery and piping new-building engineering design.
• Proficient in AutoCAD, Microsoft Office, and AVEVA.
• Knowledgeable about rules and regulations from Classification Society and Authorities.
• Familiar with the theory and calculations related to marine/offshore mechanical and piping design.
• Strong communication and analytical skills.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Eugenie Cheah

Consulting Manager

Reg no.: R24122293

EA No: 20C0257

Job Descriptions:

• Position : HVAC Engineer
• Well Established Marine and Offshore Service Provider
• Working hours: Monday – Friday
• Salary (commensurate with experience): Up to $6,000
• Working Location: Tuas
• Duration: Permanent
• Industry: Marine and Offshore

Main Responsibilities:

• Engaged in all mechanical engineering designs, calculations, preparing bill of materials, and liaise with customer and suppliers for any engineering query.
• Participated in design and construction document preparation and submissions.
• Conducted technical review and clarifications with customer and suppliers.
• Coordinated design efforts with other engineering disciplines.
• Participated in construction, installation, testing and commission activities.
• Involve in identifying the Company scope of work in the project.
• Involve in solving technical issues that arise in the project.
• Monitor the progress of the document submission.
• Performed some drafting scope and also guide drafters for drafting.

Requirements:

• Minimum Diploma/Degree in Engineering or related field.
• Relevant job experience in oil and gas/process/marine industry preferred.
• Must have basic mechanical design knowledge.
• Proficient in performing HVAC cooling capacity calculations, pressure drop calculations, and duct sizing.
• Experienced in duct installation and HVAC system installation.
• Skilled in creating piping and instrumentation diagrams (PID), Airflow diagrams, and ducting and instrumentation diagrams (DID).
• Knowledgeable in basic pipe sizing, selection, and pipe installation.
• Familiar with basic fire suppression systems.
• Proficient in using AutoCAD for drawing and design.
• Proficient in MS Office applications.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Eugenie Cheah

Consulting Manager

Reg no.: R24122293

EA No: 20C0257

Job Description

• Position: RF Design Engineer
• Well Established Singapore Based Manufacturing MNC
• Working hours: Monday – Friday (8:30am – 6:00pm)
• Salary (commensurate with experience): Up to $6,800
• Working Location: Ang Mo Kio
• Outpatient Medical Insurance Provided
• Duration: Permanent
• Industry: Manufacturing

Main Responsibilities:

• Part of the VSAT product development team involved in designing LNA, Power Amplifier, Up/Down Converter operating up to Ka band frequencies.

Requirements:

• Minimum Degree in Electronics Communication Engineering.
• At least 3 years of experience in any RF system/sub-system design.
• Experience in RF circuit design like LNA, PA, Up/Down Converter, Synthesizer etc.
• Working knowledge of RF test and measurement equipment.
• Experience in using simulation software such as AWR, ADS, HFSS etc.
• Experience in VSAT system or subsystem design is an added advantage.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Eugenie Cheah

Consulting Manager

Reg no.: R24122293

EA No: 20C0257

Job Description

• Position: Electronics Engineer
• Well Established Singapore Based Electronics Manufacturing MNC
• Working hours: Monday – Friday (8:30am – 6:00pm)
• Salary (commensurate with experience): Up to $4,500
• Working Location: Ang Mo Kio
• Outpatient Medical Insurance Provided
• Duration: Permanent
• Industry: Manufacturing

Main Responsibilities:

• Technical transfer product / project in assembly and testing, and from customers.
• Provide technical support in manufacturing and testing in product build.
• Provide technical support to QC in RMA issue.
• Provide technical support to QA in Compliance, Regulatory, Customer & Audit.

Requirements:

• Minimum Diploma in Electronics Engineering.
• At least 2 years of relevant work experience in the Electronics Manufacturing industry.
• Technical competent to handle product / project manufacturing, transfers and troubleshooting.
• Experience in product / project, PCBA manufacturing and testing.
• Able to liaise with customers on technical matters.
• Experience in manufacturing environment with ISO13485 & FDA.
• Good communication and problem-solving skills.
• Medical product experience and Quality Management System exposure is an added advantage.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Eugenie Cheah

Consulting Manager

Reg no.: R24122293

EA No: 20C0257

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Salary Range: $4000 - $4500
Working Days: 5 Days Mon-Fri 8.30AM-6.00PM
Location: Siglap

Job Summary

• Provide 1st and 2nd Level IT Support to end-users
• Manage IT assets through procurement, tracking, maintenance, refresh/renewal and disposal/ termination.
• Provide assistance in the implementation of new end-user computing technologies

Responsibilities:

• Provide 1st and 2nd Level IT Support to end-users
• Provide end-user IT support for both local and remote locations daily to ensure smooth business operation including end-user computing device performance monitoring
• Perform installation, configuration and maintenance of computers, workstations, applications and other related equipment and devices
• Perform IT asset lifecycle management including tech refresh, preventive maintenance (Eg. Laptops / Printers) and software license monitoring
• Responsible for the procurement of IT equipment, software and related products including administering procurement processes and supporting in requirements scoping and evaluation
• Manage IT vendors (service quality, feedback, improvements) and service contracts
• Provide assistance in the implementation of new end-user computing technologies
• Any other IT duties as assigned

Requirements:

• Recognized Diploma or Degree in Information Technology or equivalent
• Minimum 3 years of experience in providing IT support to end- user community
• Experienced in troubleshooting IT issues at L1/L2 support levels and escalating to higher levels of IT support

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Location: Admirax St
Working Days: 5 Day A Week
Working hours : 9:00am - 6:00pm
Salary : $5000 - $8000

Job Summary:

We are seeking an experienced Software Engineer to join our team, responsible for
designing, developing, and maintaining software applications for vision systems.

Responsibilities:

• Design and develop PC based automated visual inspection systems for our full range of semiconductor equipment.
• Evaluate and feasibility study on the customer’s vision specifications.
• Responsible to integrate any new vision hardware (camera, frame grabber, etc) onto the vision software.
• Troubleshooting and improve the processing time of the inspection.
• Provide technical support to internal and external customers to fulfill the inspection requirements. Change the vision inspection algorithm to improve the inspection capabilities and its performance.
• Be the key driver for continuous improvement plans for new and existing inspection capabilities.
• Coordinate with customer for any new enquiry with sale personnel if needed.
• Work closely with the vision application and optics team members to produce the best inspection result.
• Build and nurture a culture in engineering organization of harmony, quality, ownership, collaboration, continuous improvement and data-driven decision making.

Requirements:

• BS Science Diploma or higher in electrical and electronic, mechanical, or mechatronics engineering or related technical discipline or equivalent practical.
• Technical troubleshooting experience.
• Minimum 3 years in related field.
• Relevant technical work experience including automation machine system troubleshooting.
• Experience working with end customers.
• Understanding semi-conductor manufacturing process, vision inspection settings, machine software settings and configuration or equivalent practical experience.
• At least 3+ years of experience in software development with C#, WPF, Image Processing , Halcon (bonus)

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Job Description:

• Design and project management of mechanical and electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc. Engineers are expected to carry out design work, attendance at consultants meetings and management of the relevant M&E aspects of the construction activities.

Qualifications:

• Degree holder with min. 5 years’ experience or Diploma holders with 8 years’ experience in design and implementation.
• Able to multi-task and work in a fast paced environment
• Possess initiative, drive and ability to work independently
• Good interpersonal/communicational skills
• 4.5 days’ work week
• Experience in construction industry would be an added advantage

Next Step:

Please submit your updated resume in MS Word format by clicking the QUICK APPLY button.

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use and/or disclosure of personal data by AlwaysHired and its affiliates for the purpose of job application processing, career advisory, research and any other administrative purpose, in compliance with the relevant provision of personal data protection act.

Daniel Lim

Registration Number: R24124455

AlwaysHired Pte Ltd

EA Licence No: 24C2293

Mechanical Engineer

• Working hours: 5-days (Mon to Fri) / 8 am to 4.30pm
• Location: Jurong Island (Company transport provided near Jurong
• East MRT)
• Salary Range: $4500 - $5500

Maintenance Engineer (Mechanical) reports to the Senior Technical
Manager and whose responsibilities include:
1. Oversee, manage, and supervise Company’s in-house and external Contractors for all mechanical maintenance works related to planning and execution of:
(a) daily maintenance [preventive, corrective, & breakdown
maintenance],
(b) transition maintenance,
(c) turnaround maintenance and
(d) upgrading and improvement related to maintenance
2. Ensure all mechanical maintenance activities are carried out in accordance to the Company’s HSEQ Standards & Maintenance Management System, statutory requirements and best industry practices.

3. Establish, continually improve & execute Company’s maintenance management system in a safe, efficient, and effective way to achieve highest equipment reliability & availability objective.
4. Update and maintain accurate maintenance records in order to provide good maintenance history for data analysis and troubleshooting purposes.
5. Conduct root cause analysis to eliminate equipment/ system defect and take appropriate preventive/ corrective measures.
6. Optimize & manage mechanical maintenance inventory level of critical & non-critical equipment spare parts.

Requirements:

• Degree in Bachelor of Mechanical Engineering
• Familiar with Static and Rotating equipment
• Minimum 3 years of experience in Chemical Process Plant.

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

• Industry/ Organization Type: Precision Manufacturing
• Position Title: Lead Engineer (Engineering Design department)
• Working Location: Zhuhai, China
• Working Hours: 5 Days, Mon-Fri (8 am-5.30 pm)
• Salary Package: Basic Salary (Up to￥30K) + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Coordinate and align the Engineering teams and resources with the objective of “Design for Manufacturing” to achieve product leadership in the related industry.
• Understand, communicate, and manage the core needs of customers’ design and their requirements.
• Offer cooperation and support on Engineering needs as required by other departments.
• Operate as a team player with the ability to collaborate with other Department Heads in achieving corporate objectives.
• Lead engineering initiatives to ensure product designs are optimized for manufacturing and industry leadership.

APPLY NOW!!!

• Degree in Mechanical Engineering or its equivalent.
• Minimum 10 years of relevant working experience in the related industry.
• Excellent communicator with strong organizing and leadership skills.
• Knowledgeable in material substrates such as elastomer (Silicone rubber), plastics and metal.
• Hands-on experience with Pro-E Creo and Unigraphics (NX)/ AutoCAD software.
• Exposure to managing Product Development of component parts relating to Silicone Rubber, Plastics and Metal (any 2 out of 3 required substrates is acceptable) with client’s 2D/ 3D drawings.
• Possess some secondary process and tooling knowledge.
• Good rapport in interfacing and negotiating with local and global customers on Product and Engineering Development.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to anraduscn.researcher01(at)gmail.com. Please indicate #67118 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Position: Network & Security Engineer
• Well Established Singapore Based IT Service Provider
• Working hours: Monday – Friday
• Salary (commensurate with experience): Up to $8,000
• Working Location: East
• Duration: Permanent
• Industry: IT

Main Responsibilities:

Project implementation, migration, and maintenance support across various products, including:

• Wireless Networks, Switches, and Routers: Implementation of Cisco, HPE/Aruba, or Ruckus switches with multiple VLANs and routing; wireless implementations using Cisco, Aruba, or Ruckus.
• Other Products: Bluecoat Proxy, RSA Server, MS Radius Server, Aruba ClearPass, Aruba AirWave, Nessus, SolarWinds, PRTG.
• Firewalls: Cisco, Checkpoint, Watchguard, FortiGate, Palo Alto, and Juniper, including IPsec/site-to-site VPN, and UTM features such as antispam/antivirus, IPS/IDS, and content filtering.
• Basic Windows Server implementation with AD, DHCP and DNS.
• MS Azure network configuration.
• Provide 24x7 software maintenance support on a rotational standby basis.

Requirements:

• Possess a degree or diploma in Computer Science.
• Minimum 3 years of IT experience, preferably with project implementation and support exposure in systems integrator environment.
• Knowledge of VMWare, or HP/IBM Blade servers/SAN storage would be an added advantage.
• Candidates with less experience will be considered for a junior position.
• Salary will be commensurate with the candidate's experience.

Email to: [email protected]for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Eugenie Cheah

Consulting Manager

Reg no.: R24122293

EA No: 20C0257

IT Support Engineer

Salary Range: $4000 - $4500

Working Days: Mon - Fri (8.30AM - 6.00PM)

Working Location: Siglap

Job Summary

• Provide 1st and 2nd Level IT Support to end-users
• Manage IT assets through procurement, tracking, maintenance, refresh/renewal and disposal/ termination.
• Provide assistance in the implementation of new end-user computing technologies

Responsibilities:

• Provide 1st and 2nd Level IT Support to end-users
• Provide end-user IT support for both local and remote locations daily to ensure smooth business operation including end-user computing device performance monitoring
• Perform installation, configuration and maintenance of computers, workstations, applications and other related equipment and devices
• Perform IT asset lifecycle management including tech refresh, preventive maintenance (Eg. Laptops / Printers) and software license monitoring
• Responsible for the procurement of IT equipment, software and related products including administering procurement processes and supporting in requirements scoping and evaluation
• Manage IT vendors (service quality, feedback, improvements) and service contracts
• Provide assistance in the implementation of new end-user computing technologies
• Any other IT duties as assigned

Requirements:

• Recognized Diploma or Degree in Information Technology or equivalent
• Minimum 3 years of experience in providing IT support to end- user community
• Experienced in troubleshooting IT issues at L1/L2 support levels and escalating to higher levels of IT support

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

Our client is a well-established MNC, market leader in the IT industry. Due to their current expansion plan, they are looking for an IT Maintenance Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities:

• Provide technical assistance to clients when required.
• Support operations on a 24/7 basis, with rotating shifts.
• Diagnose and resolve technical issues promptly.
• Communicate complex technical information in simple terms to clients.
• Understand and manage client requirements.
• Collaborate with the support team to escalate unresolved issues to the relevant product vendors.
• Maintain close communication with vendors to improve and support product solutions based on feedback and industry trends.
• Continuously enhance knowledge in IT security products and solutions.
• All other adhoc duties as assigned.

Requirements:

• Minimum Nitec/Diploma or other related field of studies.
• Minimum 1 years’ relevant experience.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Electrical Engineer (Satellite, Radio Frequency)/ Geotechnical Engineer

The Electrical Engineer is required to attend to pre-sale electrical matters and provide suggestions on project specification and give calculation on the amount of electricity consumption.

Responsibilities:

• To conduct and lead design reviews for Radio Frequency/ Satellite, Network communication systems.
• Responsible for SATCOM/Micro Wave system and network configurations, acceptance, interface and performance testing and commissioning of SATCOM/Microwave systems.
• Understand contractual and project requirements and specifications, propose and generate (SATCOM/MW) system architecture and designs.

Requirements:

• Good in handling Electrical Engineering skills and provide calculation on electricity consumption.
• Ability to calculate on the amount of Electricity required.
• Expert in electrical engineering.
• Good in handling Single diagram and sizing; SLD
• Responsible in handling Electrical Input and output of the equipment and Sizing of electrical equipment
• Good in handling Modulators and Voltage regulator
• Experience in handling Low noise amplifier and Electrical wiring.
• Good in handling Electricity Calculation, Drawing, Design and management of electrical specification with cost and time line.
• Strong knowledge of Radio Frequency, Microwave, Satellite (Satcom) and Microwave.
• Diploma/Degree in Electronics/Electrical Communication Engineering.
• Experience in handling Radio Frequency/ Satellite and Network.
• Proficient in operating RF and electronics test and measuring equipment such as signal generator and spectrum analyzer
• Experience in Satellite/Microwave Communications and Network is an added advantage.

We respect your privacy and all communication will be treated with confidentiality.

If you have meet the job requirements that we are looking for or wish to find out more on this role, please contact us or apply in-confidence to us with your updated resume in MS Words format to : [email protected]

*Only shortlisted candidate will be notified.

Lee Kelvin No. R1872625

STAR CAREER CONSULTING PTE. LTD (EA License: 20C0353)