Responsibilities:

• Operate the Combined Cycle Power Plant safely, efficiently, and in accordance with established operational guidelines to meet output requirements.
• Prepare for, execute, and monitor the startup, shutdown, and routine operations of generation units and auxiliary systems.
• Carry out condition monitoring, review operating parameters, and correct deviations to maintain optimal plant performance.
• Identify, report, and rectify all system, plant, and equipment defects.
• Ensure adherence to the plant’s generation dispatch schedule, conducting operational tests and inspections as required.
• Respond to plant emergencies, equipment failures, and outages.
• Manage generating unit operations and maintenance activities, ensuring compliance with safety measures and specifications.
• Monitor work areas and inspect tools and equipment to detect and prevent unsafe conditions or violations of procedures and safety rules.
• Prepare daily shift log reports and other operational reports.
• Liaise with external agencies (e.g., EMA PSO, PUB, NEA, SCDF) on operational matters during shift duty.

Requirements:

• Nitec in Mechanical, Electrical Engineering or an equivalent discipline.
• Knowledge of plant processes, operations, and safety protocols.
• Relevant experience in power plant operations, or related industries, is advantageous.
• Possession of a 2nd Grade Engineer (Steam) Certificate of Competency or a 1st Grade Engineer (Steam Combustion Engine) Certificate of Competency awarded by the Ministry of Manpower is an advantage.
• Proficiency in Microsoft Word, Microsoft Excel, and Maximo EAM or equivalent software.
• Strong analytical and communication skills, self-motivated, independent, and a team player.
• Willingness to work 12-hour rotating shifts.

Responsibilities:

• Lead and oversee daily activities of assigned staff, providing performance feedback and staffing recommendations.
• Examine test samples and interpret measuring instruments, blueprints, schematics, and operational instructions.
• Develop and implement operating, maintenance, and test procedures in line with laboratory standards and safety policies.
• Coordinate, schedule, and review staff workflow to ensure efficient resource utilization.
• Design and adapt test setups and equipment based on test specifications and engineering requests.
• Prepare purchase and material requisitions, and recommend solutions for test-related issues.
• Collaborate with engineering teams and clients to ensure clear communication of test methods, equipment availability, and results.
• Assist in training and developing laboratory staff, and plan and evaluate tests, providing interpretations and reports.
• Support the development of new test methods and modifications to existing ones.
• Contribute to annual budget planning, capital expenditures, and tactical goals for laboratory operations.
• Integrate continuous improvement practices and adhere to the Underwriters Laboratories Code of Conduct and security protocols.
• Perform additional duties as needed.

Qualifications:

• Diploma or degree in Electrical Engineering or a related field, with at least 6 years of relevant experience.
• Proven ability to manage multiple projects while ensuring high-quality results and exceptional customer service.
• Strong collaboration skills, partnering effectively with Engineering and Laboratory teams to complete projects on time and with precision.
• Expertise in analyzing unique testing needs and performing product safety and electrical performance testing.
• Experience in Electromagnetic Compatibility (EMC) testing or familiarity with ISO/IEC 17025 standards is preferred.
• Skilled at coaching and mentoring junior laboratory staff.
• Excellent communication skills, with the ability to interact professionally with customers.
• Innovative, creative, and team-oriented.
• Proficient in Microsoft Office and able to incorporate automation into testing processes.

As a member of the Control and Instrumentation team, you will be responsible for executing maintenance work on instrumentation and control systems in the power plant effectively, efficiently, and to comply with safety and regulatory requirements.

Responsibilities:

• Carry out repair and rectification of equipment failure and malfunction. Test and recommissioning of rectified system or equipment
• Carry out the overhaul, inspection, calibration, servicing program during plant scheduled outage.
• Implement modification, upgrading, and installation plans for plant system and equipment for enhancement, availability, and reliability improvement.
• Maintains detailed work reports, spreadsheets, graphs, plots on computer-based software (Maximo, MS Word, and MS Excel)
• Assist Engineers and Technical Officers in the maintenance work
• Supervise contractors under his charge

Requirements:

• Nitec in Electronics Engineering or equivalent
• Possesses knowledge of Instrumentation
• Preferably possesses 2 years of experience in Power Plant or Oil and Gas industry
• Self-driven, with a good working attitude and a good team player
• Is available on standby after office hours for emergency calls
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

Job Title : Building Facility Technician

Location : Tuas

Working Day: Monday to Friday: 7.45 a.m. to 4.45 p.m.

Tuesday to Saturday: 7.45 a.m. to 4.45 p.m.

Changing rotating every 2 week

Basic : up to $2500

Benefits : 14 Days Annual Leave, Variable Bonus , Quarterly Bonus (Depends on company performance)

Responsibility

• Work in a team to maintain the mechanical or electrical installation and equipment.
• Assist in the installation, operation and maintenance of Company's manufacturing plant machinery, building and associated facilities.
• Carries out inspection and servicing of the Company's mechanical and electrical installations, building and associated facilities, air-conditioning units, machinery and equipment.
• Attend to requests / complaints from users and carries out minor repairs.
• Liaise and attend to outside contractors during major repairs or installation works and provides assistance as required.

Requirements

• ITE/Diploma in Electrical, Mechanical, Building Services, Facilities Management or equivalent.
• Preferably with some relevant experience in building, facilities, and M&E services maintenance.
• Able to support duty on weekends/Public holidays or perform 12 hrs rotating (Day/ Night) shift when required.

WONG MENG KANG

Superform Consulting Pte Ltd

R1988500/15C7536

Job Description:

• Ensure the machine is working correctly, and calibrating the machine to ensure proper measuring.
• Perform incoming, in-process and final inspection as per customer requirement.
• Maintain calibration record of measuring equipment.
• Document inspection results by completing reports and logs.
• Maintain safe and healthy working environment by following standards and procedures.
• Raise non-conformance report if necessary.

Job Requirements:

• NITEC/Higer NITEC in Precision Engineering.
• 2 -3 years of relevant QC experience in a manufacturing environment and knowledge.
• Able to interpret technical/mechanical drawings of geometrical dimensioning and tolerance.
• Able to perform CMM measurement; preferably with Wenzel or Zeiss.

Project Initiation and Planning:

• Collaborate with stakeholders to define project goals, objectives, and requirements.
• Create and maintain comprehensive project plans, timelines, and budgets.
• Identify and allocate resources, including team members and third-party vendors.
• Establish project communication plans, risk mitigation strategies, and change management processes.

Project Execution and Control:

• Lead project teams, providing guidance and motivation.
• Monitor project progress, identify and resolve issues, and manage changes in scope.
• Ensure adherence to project management methodologies and best practices.
• Communicate project status, risks, and issues to stakeholders and senior management.

Quality Assurance:

• Define and enforce quality standards and best practices.
• Conduct quality reviews and audits to ensure project deliverables meet requirements.
• Implement continuous improvement processes to enhance project outcomes.

Risk Management:

• Proactively identify project risks and develop mitigation and contingency plans.
• Monitor and manage risks throughout the project lifecycle.
• Implement strategies to minimize project disruptions and delays.

Stakeholder Management:

• Build and maintain strong relationships with internal and external stakeholders.
• Facilitate effective communication and collaboration among project team members.
• Address stakeholder concerns and feedback in a professional and timely manner.

Documentation and Reporting:

• Maintain comprehensive project documentation, including project plans, status reports, and change logs.
• Provide regular and ad-hoc project reports to senior management and stakeholders.
• Ensure compliance with all relevant regulatory and compliance requirements.

Requirements

• Recognised bachelor's degree in information technology, computer science or related field.
• Minimum of 5 years of experience as an IT Project Manager, managing complex technology projects.
• Experience in a facilities management technology implementation is a plus.
• Strong knowledge of project management methodologies (e.g., Agile, Waterfall, Scrum)
• Excellent leadership, communication, and interpersonal skills
• Proficiency in project management software and tools
• Strong problem-solving and critical-thinking abilities
• Exceptional organizational and time management skills.
• Ability to interpret Autocad and BIM drawings is a plus
• Proficient in English (written and spoken)

Responsibilities:

• Execute service and maintenance workflows efficiently.
• Coordinate with client representatives on all service/maintenance matters.
• Assist the supervisor in organizing teams for service tasks and delegating responsibilities.
• Manage daily client interactions, ensuring their expectations are met.
• Support the supervisor in troubleshooting and timely completion of security system services.
• Understand each client's business to ensure high customer satisfaction.
• Ensure all work complies with Workplace Safety and Health Act regulations.

Requirements:

• Minimum Nitec in Electrical/Electronic Engineering.
• At least 2 years of working experience in related field.
• Requires knowledge and practical experience with security systems (e.g., Integrated Security Management, Card Access Control, Intrusion Detection, and CCTV systems).
• IT/Network/Server knowledge is a plus.
• Transport allowance provided.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

• Execute day to day safe operation of 105 KTPA PS compact and finished goods packaging operation.
• Responsible for the smooth and safe operation of PS Compact, Utilities and Packaging lines.
• Responsible to ensure product are produced within quality specifications.
• Execute production planning & follow up daily & planned maintenance activities in the shift.
• Troubleshooting & take appropriate corrective actions for Compact and Packaging line in the shift.
• Highlight / Perform segregation for out-of-spec quality product

Job Requirements

• Minimum N or O Level with ability to read, write and speak in English
• Must be able to work 3 cycles rotating shift (Morning Shift 7am to 3pm, Afternoon Shift 3pm to 11pm, Night Shift 11pm to 7am
• Must be physically fit, able to work at heights and perform lifting of 30kg load
• Fresh graduates and/or those without experience are encouraged to apply as training will be provided.

Control Room Operator Functions:

1. Set and adjust indicating, controlling, or timing devices, such as gauging instruments, thermostat, gas analyzers, or recording equipment

2. Move controls to adjust feed and flow of liquids and gases through equipment in specified sequence.

3. Adjust controls to regulate temperature, pressure, and time of prescribed reaction, according to knowledge of equipment and process

4. Activate pumps, agitators, reactors, blowers, or automatic feed of materials

5. Monitor gauges, recording instruments, flow meters, or product to regulate or maintain specified conditions

6. Mix chemicals according to proportion tables or prescribed formulas

7. Record operational data such as temperature, pressure, ingredients used, processing time, or test results, in operating log

8. Read, comprehend, and follow written and oral instructions, safety rules, operating procedures and product recipes

9. Use a computer graphical interface to control Programmable Logic Controller

10. Operate or tend auxiliary equipment, such as heaters, scrubbers, filters, or driers, to prepare or further process materials

11. Operate and monitor utility system

12. Reside as an active Emergency Response Team member

Field Operator Functions:

1. Operate valves and pumps to admit or drain specified amounts of materials, impurities, or treating agents to or from equipment

2. Flush or clean equipment, using steam hose or mechanical reamer

3. Draw samples of product and sends to laboratory for analysis

4. Perform general clean up and maintain good housekeeping in order to keep working areas clean, organized, and safe

5. Patrol and inspect equipment or unit to detect leaks and malfunctions

6. Weigh or measure specified amounts of materials

7. Read, comprehend, and follow written and oral instructions, safety rules, operating procedures and product recipes

8. Use a computer graphical interface to control Programmable Logic Controller

9. Load and unload tank trucks and drums containing hazardous and non-hazardous materials

10. Dump prescribed solid, granular, or powdered materials into equipment

11. Perform incidental maintenance as required to troubleshoot processes and to keep processes running properly

12. Lock out processing equipment to make sure maintenance can safely repair processing equipment

13. Perform laboratory analysis for waste water shipments

14. Train new Chemical Operators on job functions

15. Reside as an active Emergency Response Team member

Job Description

• Conduct field measurements using various equipment or instruments.
• Troubleshoot and resolve issues with monitoring systems on-site.
• Set up and configure monitoring systems at different locations.
• Compile data, assist in report preparation, and ensure accuracy of field records.

Requirements

• Proficient in Microsoft Office
• Advantage to have National ITE Certification
• Advantage to have Driving License (Class 2 or Class 3)
• No prior experience required. Comprehensive training will be provided.
• Working Hours 8.30am to 6pm, Monday to Saturday

Requisition ID:R000060450 Mechanical Technician/ Trainee

Job Location: Singapore - Jurong Island

To submit application, please click below posting link or copy and paste to a new browser:

https://chevron.wd5.myworkdayjobs.com/jobs/job/Singapore-Central-Singapore-Singapore/Mechanical-Technician--Trainee_R000060450

Chevron Oronite is accepting online applications for the position of Mechanical Technician located in Jurong Island, Singapore through 29 October 2024 at 11:59 p.m. (Singapore Standard Time).

All interested applicants, please read the Data Privacy Notice before submitting application.

Responsibilities for this position may include but are not limited to:

• Performs maintenance, repair, alignment and testing of rotating equipment and components such as compressors, chillers, centrifuges, pumps and gear boxes, mechanical seal, couplings etc.
• Performs maintenance servicing for pressure relief devices such as Pressure Safety Valve, Breather valves, Emergency hatches etc.
• Supervises maintenance, cleaning, repair and handover of fixed equipment such as boilers, pressure vessels, storage tanks, piping, heat exchangers, fin fans, painting and insulation work etc.
• Reads and understands equipment drawings, datasheets, crane lifting plan, P & ID or other instructions
• Determine materials, tools, manpower and methods required to complete the maintenance task
• Develop Job Safety Risk Assessment for every work assigned. Ensure Safe Work Procedures are followed. Ensure safeguards are followed such as valid permit are issued, wearing prescribed Personal Protection Equipment etc.
• Liaise with operations for system handover; liaise with other functions such as warehouse and equipment vendors for completion of urgent break-in work
• Writes post maintenance reports, communicates findings to relevant work groups; follows and completes maintenance quality assurance checklist
• Assists in troubleshooting equipment with operations and equipment vendors; able to utilize and interpret manufacturer’s operation and repair manuals

Required Qualifications:

• NITEC/Higher NITEC/Diploma in mechanical engineering or related engineering discipline
• Fresh graduate without working experience is also welcome to apply
• Preferably with background in oil & gas, petrochemical, and pharmaceutical industries
• Strong oral and written communication skills.

Preferred Qualifications:

• Able to operate drilling and fixed hoist
• Able to thread piping and fittings for assembly, join PVC piping and tubing
• Able to perform hydro-test of fixed equipment or rotating equipment during integrity/leak test
• Utilize Computerized Maintenance Management System (CMMS). Input into CMMS details such as equipment history, time confirmation, work notification history. Provide feedback post maintenance for continuous improvement

Service Technician - Mechanical

Our culture believes in POWERING YOUR POTENTIAL. We provide global opportunities to develop your career, make your community a better place and work with today’s most innovative thinkers to solve the world’s toughest problems.

We believe in flexibility for you to explore your passions while making an impact through meaningful work within our inclusive workforce. That’s what #LifeAtCummins is all about.

We are looking for a talented Service Technician - Mechanical to join our team based in Tuas, Singapore. This is an Onsite role reporting to the Service operation Manager. This role will also require travelling within Singapore. Reporting to the Service Supervisor, this role provides support for all Cummins products, primarily in Automotive, Industrial and Marine applications, in a combination of workshop and field work. You will respond to engine breakdowns and provide technical analysis of failure, warranty support and troubleshooting engineering issues. Previous experience in a similar Service role, and knowledge of High-Speed Diesel engines, is essential.

This position offers a long-term career with a global organisation in the power industry and could be the next step in your successful Service career.

In this role, you will make an impact in the following ways:

Responsibilities:

· Diagnoses and completes repairs to engines at the customer’s site.

· Engages customers in a courteous and professional manner. Anticipates and ensures prompt and efficient attention to customer needs.

· Applies the use of specialized tools and follows documented procedures and policies to diagnose and complete less complex repairs, including identifying and preparing required parts and tools.

· Performs preventative maintenance activities as per documented schedules and standards on engine and related components in the field.

· Escalates unresolved issues to more experienced Field Service Technicians and/or Supervisor.

· Completes required documentation, such as service worksheets, timesheets, warranty claims, quality documents via handwritten forms or business system input screens.

· Identifies additional service opportunities with customer.

· Completes training in line with skill and business requirements.

· Maintains service vehicle and tools for cleanliness and proper operation.

· Ensure adherence to all relevant Health Safety & Environmental policies, procedures and legislation and reports any issues / incidents to site management and to their supervisor.

To be successful in this role you will need the following:

· Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences.

· Manages complexity - Making sense of complex, high quantity, and sometimes contradictory information to effectively solve problems.

· Customer focus - Building strong customer relationships and delivering customer-centric solutions.

· Develops talent - Developing people to meet both their career goals and the organization’s goals.

· Self-development - Actively seeking new ways to grow and be challenged using both formal and informal development channels.

· Service Documentation - Creates and verifies customer, equipment and technical information; captures specific data using required service tools; follows procedures and documents required information in the service management system in order to have an accurate record of the work done.

· Technical Escalation - Obtains product technical issue information and utilizes available resources including data management tools; elevates issues to a higher level of expertise, balancing timeliness of customer response with investigation efforts; captures all troubleshooting steps in the appropriate database in order to ensure seamless transitions and accurate response to ticket resolution in a timely manner.

· Diagnostics Application - Translates customer complaints to develop troubleshooting plan; troubleshoots issue following guided work flows, procedures, specialized equipment such as mechanical and electronic service tools, and diagnoses computer software to isolate failed components to enable a successful repair; validates repair by duplicating complaint to ensure it has been resolved; documents results of troubleshooting in business systems to communicate what has been done for payment and historical tracking.

· Electronic Service Tool Application -Identifies the suite of available hardware and software tools required for a service event; utilizes the appropriate electronic tool set to maintain the product or diagnose and troubleshoot an issue; interprets electronic tool results or recommendations to determine next steps for service resolution.

· Product Repair and Maintenance -Repairs and maintains mechanical/electrical products following guidelines, using required tools within standard repair time to ensure a quality repair; disassembles and assembles engines or power generators following guidelines, using required tools to ensure a clean and organized environment; inspects and replaces parts and components following re-use guidelines to minimize customers cost of ownership; performs progressive damage check following guidelines to restore to pre-failure condition.

· Engine Systems Interactions -Interprets and analyses the interactions of internal and external electrical and mechanical systems (exhaust, heating, cooling, fuel systems, driveline, aftertreatment, controls, sensors, etc.) by applying tools, service publications (Cummins, Original Equipment Manufacturer) and taking measurements to efficiently and correctly diagnose and repair.

· Health and Safety Fundamentals -Champions and models proactive health and safety behaviours by identifying, reporting and participating in actions to improve health and safety in order to build an interdependent culture and contribute to an injury-free workplace.

Preferred Qualifications:

· Apprentice Trained Engine Technician (Preferred)

· Vocational diploma from relevant technical institution

· Locally valid driving permit

· This position may require licensing for compliance with export controls or sanctions regulations.

· Basic level field service work experience

. Good to have work background either mechanical or electrical or both.

· At least 3 years relevant work experience preferred.

· Intermediate level knowledge of and/or experience with engine products

· Customer service experience

· Preferably with Singapore Class 3 or above driving license.

· Able to write and speak in English language.

· No cross-border relocation support provided.

Compensation and Benefits

· Salary rate commensurate with experience. Flexi Benefit. Variable Compensation (bonus). Annual Salary Review. Life Insurance. Medical / Hospitalization Insurance.

At Cummins, we are an equal-opportunity employer dedicated to diversity in the workplace. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, colour, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law.

COMPANY DESCRIPTION

We are one of the largest one-stop Underground Utilities Infrastructure companies based in Singapore. We provide Underground Utilities Infrastructure construction and maintenance, sewer pipeline rehabilitation, road and airfield construction and maintenance as well as asphalt pre-mix production and construction waste recycling.

RESPONSIBILITIES

• Monitors and inspects the quality of materials (aggregates, asphalt premix).
• Involves monitoring performance and quality of personnel, processes, and methods on an ongoing basis to ensure compliance with laboratory procedure.
• Required to ensure that all workers receive required training and that they understand the rules of laboratory work and responsibilities.
• Assigns tasks and makes arrangements for the workers daily tasks.
• Perform check QC test reports for projects teams.
• Provide assistance to managers in resolving any problems related to their work obligations.
• Keep track of training records for new or current workers and training needs are met.
• Assist testing in laboratory research and development.
• Assist and perform longitudinal road profile measurement (International Roughness Index) using laser profiler.
• Work with the QC site team to arrange for the necessary samples and other QC-related tasks.
• Responsible on any other duties like raising PR (consumables/equipment).

Performing other admin duties or tasks as assigned by the immediate superior or HOD.

• Minimum ITE level or related field
• Minimum 1 year of experience in constructions or civil engineering
• Those with experience in laboratory testing of civil engineering materials will be advantageous
• Good documentation and planning skills
• Possess good communication and interpersonal skills
• Able to work independently as well as a team player
• Possess a good mindset and attitude with a strong drive to learn

• Only Singaporeans
• 6 days work week

Other Benefits

• Provided company lunch bus
• Annual leave entitlement start at 14 days
• Medical Teleconsult
• Medical benefits (applicable for dental and company provider health screening)
• Portable Medical Benefit Scheme (PMBS) - additional monthly contribution direct to Medisave account

Job Description:

The Part-Time Specialist – Centre Management System Support is responsible for ensuring all exhibits, audio-visual equipment, facilities, and essential services are available daily to support daily operations for centres/museums under Defence Collective Singapore (DCS), creating a safe, functional, and comfortable environment for employees, visitors, and customers.

The Part-Time Specialist may also be converted to a Full-Time role after assessment by the relevant reporting officer which proves his/her aptitude, suitability and adaptability in the current role.

Responsibilities:

• Daily Startup & Shutdown of Facilities, Exhibits, Attractions & Projection Systems.
• Maintenance and Repairs: Perform routine maintenance tasks, including plumbing, electrical, exhibition and gallery equipment, HVAC, and mechanical repairs to ensure the proper functioning of facilities and equipment.
• Building Systems: Monitor and maintain building systems such as heating, ventilation, air conditioning (HVAC), fire protection, and security systems to ensure compliance with safety standards and regulations.
• Contractor Coordination: Coordinate with external contractors, vendors and service providers for specialized repairs, installations, or renovations as needed. Supervise and inspect the works of contractors and the works of the 2 service providers (cleaning, housekeeping, landscaping, pest control, car park and security). To ensure contractors’ compliance to safety, regulations and level of standards set my DCS.
• Event Setup: Setup of logistics inclusive but not limited to AV Systems, Furniture, and equipment for events & daily organised visits.
• Inventory Management: Maintain inventory levels of supplies, tools, and materials needed for facility maintenance and repair activities. Recommend buying of critical spares and consumables for various facilities repair and improvement and participate in facilities improvement projects.
• Emergency Response: Respond to emergency situations, such as power outages, equipment failures, fire emergency/incidents or building damage, and implement appropriate measures to mitigate risks and minimize disruptions.

Requirements:

• N-Level/O Level/ NITEC/ Professional Certificate
• Preferable with 1 year working experience in similar roles. Fresh graduates are also welcome to apply.Demonstrated ability to communicate effectively, including proficiency in clear, concise, and compelling oral and written communication in English.
• Demonstrated ability to work independently and under pressure and to manage multiple concurrent tasks and responsibilities while dealing with changing priorities.
• Familiarity with computerized maintenance management systems (CMMS) or facility management software for work order management and asset tracking
• Withstand various strenuous activities such as frequent walking, prolonged standing, climbing ladders, bending, and kneeling without restriction.
• Physical stamina and mobility to perform manual labour, lift heavy objects, and work in various environmental conditions.
• Able to work on rotating shifts, weekends, and public holidays. Flexibility to work flexible hours, including evenings and weekends.

Benefits:

• Uniform provided.
• Transport reimbursement.
• Able to convert to Full time staff.
• Free SDC Adventurer Membership after 1 month deployment.
• 20% for dining at Bottle Tree

Technician Responsibilities:

• Diagnose, troubleshoot and repair mobile devices;

• Quality control and testing of repaired devices to ensure full functionality. Resolve/manage customer inquiries;

• Able to interact positively with customers at the storefront and over the phone;

• Ability to multi-task between repairs and customer service;

• Other related duties as required;

• Maintain and use repair tools and equipment. Including software and in-store POS system to track repair tickets and inventory;

• Strategically plan the order of operations to ensure a successful repair;

• Provide estimates and quotes;

• Glass only replacement on Samsung and iPads;

• Microscopic Board work; component replacement Hand-solder SMT components,

• remove and replace thru-hole comp without board damage,

• solder wires and cables,

• Diagnosis, troubleshoot and repair mobile devices;

• identify assembly and documents issues;

• Repair logic board issues from water damage.

Requirements:

• Excellent knowledge of customer service best practice with previous experience;

• Ability to repair a variety of mobile devices (i.e., iPhone, Samsung, LG, Motorola, Sony, Huawei and OnePlus phone, and iPads.);

• Ability to communicate effectively with a wide variety of people in a professional manner, face to face, on the telephone and in writing;

• Knowledge of mobile devices including manufacturers, operating systems, and network service providers;

• Willing to work flexibly and with enthusiasm;

• Excellent organizational skills;

• Good attention to detail and ability to show initiative;

• Ability to demonstrate practical troubleshooting and problem analysis techniques;

• Ability to plan and prioritize your workload without supervision

Responsibilities:

• Perform daily batch processes in accordance to SOP and comply strictly to safety, quality and environmental guidelines.
• Perform equipment line-ups and operate reactors in accordance to established practices and procedures.
• Charge chemicals into reactor manually.
• Carry out drumming operations as and when required.
• Report all process/equipment/environmental abnormalities, incidents and/or near misses to Shift Superintendent/Engineer/Production Manager. Take part in further investigation when required.
• Adhere to Company and departmental procedures, SHEQ rules and regulations, and GMP at all times.
• Carry out scheduled housekeeping activities.
• Ensure proper handover and takeover during shift changes.
• Participate as CERT member.

Requirements:

• ITE Certificate/ Diploma in Engineering (Chemical), Engineering (Industrial), Engineering (Material Science), Engineering (Mechanical), Engineering (Petroleum/Oil/Gas) or equivalent.
• Relevant working experience in chemical industries.
• On-the-job raining will be provided for entry level.
• An effective team player with good communication skills.
• Must be able to work on 12-hours rotating shift in Jurong Island.
• Remuneration will commensurate with qualifications and experience.

Job Summary

The IT and Systems Manager is responsible for overseeing the organization's information technology and systems infrastructure. This individual contributor role involves providing 1st level technical support to users and working with our vendors for 2nd level / 3rd level support, managing the day-to-day operations of IT systems, ensuring network security, implementing IT policies, and managing system upgrades. The individual collaborates with other departments and ensures the organization's technology supports its business objectives effectively.

Key Responsibilities:

1. Technical Support and User Training:

· Oversee the provision of level 1 technical support to employees and departments.

· Work with and manage our vendors for level 2 and level 3 support/issues resolution.

· Develop and implement user training programs for IT systems and tools.

· Establish an IT helpdesk service to address technical issues efficiently.

· Establish clear documentation of system related processes for training and compliance.

2. IT Infrastructure Management:

· Oversee the management, maintenance, and improvement of all IT systems, including hardware, software, and networks.

· Ensure high availability of IT services, managing backups, disaster recovery, and contingency plans.

· Implement and maintain server architecture, cloud services, and data centers.

3. System Administration:

· Administer servers, databases, and networking equipment.

· Perform system monitoring, performance tuning, and troubleshooting to resolve issues quickly.

· Manage the integration of different software platforms and ensure seamless functionality.

4. Network and Security Management:

· Design and maintain secure and reliable networks (LAN/WAN/Wi-Fi) and VPN connections.

· Implement and monitor cybersecurity strategies, including firewalls, intrusion detection, and encryption.

· Regularly update security policies and ensure compliance with relevant standards and regulations.

· Project Management:

· Lead and manage project timelines, budgets, and resources.

5. Vendor and Asset Management:

· Manage relationships with third-party vendors, negotiate contracts, and oversee service level agreements (SLAs)

· Procure and manage IT hardware and software assets, ensuring efficient usage and cost-effectiveness.

· Track and manage IT inventory, ensuring timely upgrades and replacements.

6. Strategic IT Planning:

· Collaborate with senior leadership to develop and execute an IT strategy aligned with business goals.

· Identify opportunities to leverage new technologies to improve business operations and efficiencies.

· Stay current with emerging technologies and industry trends, recommending solutions that drive competitive advantage.

Required Qualifications:

· Bachelor’s degree in Information Technology, Computer Science, or a related field

· Extensive experience with IT systems, networks, and related technologies.

· Strong knowledge of system administration, network security, cloud services, and data management.

· Excellent project management and user management skills.

· Problem-solving aptitude and ability to work under pressure.

Skills and Competencies:

· Familiarity and experience with Microsoft Dynamics 365 Business Central, Microsoft Navision, Microsoft Excel, Jet Report.

· Strong technical expertise in systems administration and network infrastructure.

· Ability to manage multiple projects simultaneously.

· Excellent communication skills for collaboration across departments.

· Strong attention to detail and analytical skills.

· Familiarity with industry best practices in IT governance and security.

· Exposure and familiarity in F&B industry is a bonus – sales, procurement, inventory management processes.

· Strong ability to converse in Mandarin and in written Chinese is a requirement.

Responsibilties

- Liaise with immediete Supervisor in any high risks work to be carried out.

- Maintain good Housekeeping at end of work completion.

- Carry out instrument preventive maintenance and servicing & instrument emergency on call servicing and troubleshooting.

- Conduct instrument on-line calibration and checking.

- Control valve overhaul, servicing and calibration.

- Conduct / implement work permit system on site.

- Conduct function check of instrument loop (analog and digital signal)

- Troubleshoot and solve problems of instruments and advise on the proper repair.

- Understand flow and loop diagrams, installation diagram and specifications for installation of all type of field instruments.

- Run conduits, pull wiring, terminal wiring and functional check.

- Perform plant pre-commissioning and commissioning.

- Monitor and supervise third party maintenance and servicing activities as required.

- Ensure all documentation and procedures are up to date and adhered to.

- Check and prepare instrument calibration reports.

Requirements

- ITC/D|diploma in Electrical/lnstrumentation

- Minimum 3-4 years of relevant experience in process lndustry

- Working knowledge of P&ID drawing, loop diagram, hookup drawings, logic diagrams and single line diagram

- Knowledge about field instruments, DCS and PLC systems

- Ability to work independently at customer's, sites

- Understanding of local/international Process lndustry Codes and Practice Good written and spoken English language skills

- Good technical competence

Responsibilities

- Commission, maintain and operate process analyzers

- Provide timely status updates for all equipment at analyzer shelters and execute preventive and breakdown maintenance work for all equipment

- Develop calibration and maintenance procedures as well as provide input for continuous improvement of process analyzers

- Maintain proper records of al jobs performed in application and participate in mechanical related projects and plant modification work

Requirements

- Minimum N Level certification or equivalent with credits (C6 and above) for English, Mathematics and at least 1 Science subject (Physics, Chemistry, or Combined Science)

- Relevant work experience in the petrochemical or refining industry will be an advantage

- An effective team player with good communication skills

• Service, Maintain & trouble shoot of plant’s facilities
• Service, Maintain & trouble shoot of machinery equipment
• Perform periodic preventive maintenance of plant’s facilities & machinery equipment)
• Perform any other reasonable duties as required by Management from time to time (Such as Safety, ERT, etc)
• Willing to work rotating shifts and on public holidays

Job Description

· Operate high-end automated printing machine for quality output and timely delivery

· Run the printing press according to production plan

· Examines printed results for ink density, accuracy of design and registration conforming to required artwork

· Perform first level analysis and optimize the set-up between the printed sheets

· Conduct periodic autonomous preventive maintenance as scheduled

· Manage daily housekeeping

Job Specification

· Candidates with more experience will be consider for leader role

· Min 2 years of relevant experience in the printing industry

· Able to work rotating shift in west area

Duties & Responsibilities

As an LED Technician, you will be responsible for the installation, maintenance, and troubleshooting of LED lighting systems. Your role involves working with various LED technologies, ensuring optimal performance, and providing technical support as needed. This position requires a combination of technical expertise, problem-solving skills, and a commitment to delivering high-quality LED solutions.

1. Installation and Configuration:Install and set up LED lighting systems in accordance with specifications and industry standards.
   Configure LED controllers, drivers, and associated components to ensure seamless functionality.
   
2. Maintenance and Upkeep:Conduct routine inspections and maintenance of installed LED systems to identify and address any issues promptly.
   Replace faulty components and perform upgrades to enhance system performance.
   
3. Programming and Tuning:Program LED controllers and drivers to achieve desired lighting effects and meet customer requirements.
   Fine-tune LED systems for optimal brightness, color accuracy, and energy efficiency.
   
4. Troubleshooting:Diagnose and troubleshoot technical issues with LED installations.
   Collaborate with cross-functional teams to identify and implement effective solutions.
   
5. Quality Assurance:Ensure that all LED installations meet quality standards and comply with safety regulations.
   Conduct testing and validation procedures to guarantee the reliability of LED systems.
   
6. Documentation:Maintain accurate records of all installations, configurations, and maintenance activities.
   Create comprehensive documentation for reference and future troubleshooting.
   
7. Customer Support:Provide technical support to customers and address inquiries related to LED systems.
   Offer guidance on best practices for optimal system performance.
   

Requirements

• A minimum of 1 year of experiences in LED installation, programming, repair, and maintenance.
• Strong understanding of electrical systems and wiring.

• Provide electrical and technical support to the Operations team with electrical troubleshooting
• Prepare electrical spares in workshops to be in acceptable working conditions
• Perform electrical troubleshooting and PLC troubleshooting to increase productivity and lower maintenance cost with high uptime
• Optimize power system to ensure sustainability
• Create and maintain electrical drawing library documenting machine details and modifications
• Ensure top notch Safety, housekeeping and greenery in area of work
• Support all improvement projects such as machine, productivity and safety improvement projects

Job Requirements:

• Min GCE N Level, NITEC / ITE, or equivalent
• Candidate with no working experience are welcome to apply
• Min 1 year of relevant experience in manufacturing environment
• Able to interpret electrical circuit and diagram
• Able to work independently as well as a team player

Responsibilities

-Liaise with immediete Supervisor & SHE Supervisor in any high risks work to be carried out.

-Maintain good Housekeping at end of work completion.

-Perform electrical equipment installation and maintenance work as per client's electrical drawings and specification.

-Perform site inspection and testing of electrical equipment and installation.

-Perform troubleshooting and repair/rectify electrical equipment.

-Assist Electrical Supervisor to complete punch list and pre-commissoning work for electrical equipment and installatons.

-Comply with the site safety regulations and work permit procedures when carrying out the electrical works.

Requirements

-NTC-2 level or more in electrical/electronics engineering or secondary education or trade certificate, LEW certificate will be added advantage

-At least 3 years experience in process plant equipment

-Have the knowledge about material, such as conduits, fitting, cable, wires and others

-Familiar with electrical equipment, such as voltmeter, ammeter, IR-tester, ELCB tester, etc.

-Good practical knowledge of electrical safety practices

-Good knowledge of electrical schematic and control wiring diagrams.

-Understanding of fundamentals of hazardous area classification and ex-proof equipment

-Can do electrical work independently and also work as a team

Job Description & Requirements

1. Carry out daily inspection for facility plant equipment.
2. Carry out periodic maintenance of machines & ensure that all potential environmental impact associated with the machineries are minimized & mitigated.
3. Carry out schedule and preventive maintenance works.
4. Attend to breakdowns and assist in repair works, and escalate calls for vendor support if necessary.
5. Update and maintain records of plant equipment and machinery.
6. Upkeep the spare parts list and ensure purchases requisitions are made.

Competence Requirement

· Preferred to have NTC/ Diploma in Mechanical / Mechantronics / Electrical Engineering field.

• Fresh may be considered, but preferred with 1 – 2 years of related experiences in Maintenance of Equipments.