POSITION SUMMARY

The incumbent will be responsible for maintenance of equipment and facilities by performing maintenance, repair, troubleshoot, loop check, calibration and testing of site-wide instrumentation, control and electrical system to achieve high equipment reliability in compliance with cGMP, EHS and regulatory requirements in a cost-effective manner.

Accountable for:

• cGMP, Data Integrity and EH&S compliance
• Electrical equipment reliability and performance
• Uninterrupted process instrumentation operation
• Team performance

POSITION RESPONSIBILITIES

• Perform maintenance activities according to procedures, good engineering practices and cGMP.
• Carry out Preventive/Predictive Maintenance of plant instrumentation, control and electrical system to ensure high reliability and availability.
• Support to develop Preventive Maintenance SOP/Procedures and tasks to maintain plant assets.
• Conduct trouble-shooting and locate sources of problems by observing instrument/electrical devices in operation, listening for problems, using measuring tools and testing instruments for trouble shooting.
• Participate in continuous improvement initiatives and support (IRS/QAR) investigations.
• Support project construction and commissioning of plant equipment and systems through active involvement in punch listing and commissioning activities; discuss equipment improvement and modifications with Supervisor/Engineers.
• Maintain a safe and clean working environment on areas under one’s responsibility.
• Complete all assigned training on-time and also prior to work execution.
• Contribute to team effort by accomplishing desired results/KPIs.
• Perform calibrations on process and analytical instrumentation.
• Document all work order activities in relevant equipment logs.
• Troubleshoot and resolve calibration/instrumentation issues in a timely manner utilizing DMAIC techniques.

Qualifications

• Minimum 5 years of relevant experiences in pharmaceutical, chemical, or petrochemical industries for Senior position and Minimum 2 years for Junior position.Other Job-Related Requirements:
• Knowledge of instrument calibration, electrical system / equipment operations and maintenance skill and knowledge with experience in working in a team performance matrix environment.
• Knowledge of Computer Maintenance Management System, current Good Manufacturing Practice (cGMP) and Right First-Time technique.
• Able to demonstrates clear and concise written and verbal communication.
• Knowledge in Electrical and Instrument Maintenance Troubleshooting and Analysis Skills.

Nice-to-Have

• Bachelor’s Degree Preferably in Electrical or Electrical & Electronics Engineering or Instrumentation.
• Strong evidence of problem-solving skills.
• Strong knowledge in Process Instrument and Electrical
• Knowledge of Computer Maintenance Management System, current Good Manufacturing Practice (cGMP) and Right First Time technique.
• Able to demonstrates clear and concise written and verbal communication.
• Knowledge of instrument calibration, electrical system / equipment operations and maintenance skill and knowledge with experience in working in a team performance matrix environment.

Job Description

• Efficiently and effectively manage and operate assigned processing or packaging operation according to the standardized operating procedures, guides and manual
• Ensure the correct cleaning and sanitation of processing equipment are rendered following Good Manufacturing practices

Job Requirement

• A good team player to achieve production targets
• Self motivated and work with least supervision
• Able to be on the feet for long hours
• Transportation provided
• Candidates with relevant experience are preferable
• More focused on attitude rather than educational level
• 5.5 days week with OT's & perks

• To perform general maintenance duties in building & machineries & equipments.
• To perform preventive maintenance on machines & equipments bt cleaning, lubricating, greasing etc for optimization.
• To perform minior electrical work not requiring licence such as office lighting, appliances etc.
• To apply paint or varnish all types of surfaces for protection
• Perform related duties as required such as external support or repair
• To assist in recording facility utilities.
• To carry routine inspections on all operating machineries & equipments
• To ensure all ad-hoc work are carried out

Minimum ITE with relevant fields

Able to work as a team

Efficient and adhere to KPI's given

Conform to WSH guidelines

Work at height certificate a plus

Duties & Responsibilities

• Support end-user hardware and software deployment
• Provides support and troubleshooting for end-user incidentals
• Liaising with outsource services provider in resolving issues when required
• Support and maintain office IT assets and documentation
• Monitoring and maintaining office network and data backup and recovery
• Liaising with vendors in sourcing and purchasing or IT requirements
• Support user account maintenance for ERP system
• Help to setup or troubleshoot and resolve online meeting incidentals
• Maintain company website and email accounts
• Support branch office IT counterpart when necessary
• Any other relevant job scope assigned

Requirements

• MCandidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Computer Science/Information Technology or equivalent.
• Minimum 3 years’ experience as an IT administrator
• Must be knowledgeable in server virtualization
• Linux and Window Server deployment, configuration, and patching
• Proficiency in Office 365, Microsoft Team and perpetual Microsoft Office
• Knowledgeable in VBScript for Excel and Power BI
• Proficiency in maintaining Network switches and Firewall
• Database optimization and performance tuning
• Good interpersonal and communication skills

• Inspects specific assemblies, onboard boiler repair, deck panels, and coverings, for conformance to dimensional specifications and quality standards, using level, square, and measuring instruments and applying knowledge of carpentry.
• Responsible to issue PTW for all site work
• Responsible and accountable to follow all Safety Procedures of the site.
• Performs In process sampling and testing.
• Performs simple maintenance jobs in accordance with safety requirement.
• Preparation of equipment for lock out tag out (LOTO), filter change outs etc.
• Report all accident, injury, near miss, unsafe conditions, and behaviour to immediate supervisor so that remedial actions can be taken to eliminate risk.
• Ensure utilities and facilities problems are identified and repaired quickly.

Service Engineer / Technician (5 Day / West)

Job Type: Full-time

· Travel opportunity

· Training provided

· 5 days work week

Responsibilities

· Have a passion to carry out trouble-shooting and maintenance works

· Willing to do hands-on work

· Willing to do brazing work

· Loves the satisfaction after solving difficult machines.

· Other adhoc duties

Requirements

· Candidate must possess at least Secondary School/"O" Level, Professional Certificate/NiTEC, Diploma/Advanced/Higher/Graduate Diploma in Engineering (Industrial), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.

· Required language(s): English

· Required Skill(s): Aircon, Refrigeration, Chiller, Mechanical, Vacuum Pumps, Water Pumps, Scrubbers.

· At least 1 year of hands-on experience in trouble-shooting & service-repair of refrigeration systems or chillers

· Able to travel on short notice

· Possess valid driving license (optional)

· Only Singaporean/SPR/Malaysian may apply.

Interested candidates who wish to apply for the advertised position, please send your resume to us via ' APPLY NOW '. We regret only shortlisted candidates will be notified.

Email ([email protected])

Roles & Responsibilities

Assemble and install mechanical systems for industrial, electromedical, and manufacturing purposes Implement cost-effective changes in equipment design to improve reliability and safety

Assist mechanical engineers in developing, building and maintaining machines and tools

Read and interpret engineering designs, plans, and diagrams for piping, transmission, and HVAC systems Prepare cost and material estimates for a project

Test and analyze machines, tools, and components to determine their performance, strength and response to stress

Design manufacturing implements such as jigs, dies, and moulds

Carry out inspections to identify faults and initiate repair of mechanical systems or products

Monitor mechanical processes to ensure conformance to standard project procedures Use

CAD software and technology to prepare drawing plans and design for an engineering project

Assemble components or machine parts to form integral or complete product unit

Provide technical solutions to mechanical problems found in a variety of industries

Develop and design prototypes of equipment

Ensure compliance with health/safety procedures and regulations

Implement quality control systems useful in evaluating and testing mechanical processes/product for consistency.

Requirements

Diploma in Mechanical Engineering

Min 4-6 years experience in heavy machinery (mainly focus on construction machinery) servicing job

Familiar with hydraulic system and machinery electric system, understand the hydraulic system theory, and follow up heavy machinery trouble shooting job

Possess Class 3, 4 License is an advantage

Possess knowledge of diagnosing defects and repair mechanical equipment such as heavy machinery, Crawler Crane, Excavator or Drilling Rig, Reach Stacker etc

With electrical or hydraulic knowledge is a must

Technician

To perform day to day works in the workshop, servicing & setting up equipment and system at any worksites. Understanding of the working of engines and alternators and electrical control system would be an advantage.

Role & Responsibilities

• Able to operate at least one of the company equipment which includes generators, load banks, transformers, industrial air conditioners & chillers.
• Respond to any emergency breakdown calls
• Attend and travel for overseas assignments as and when required.
• Set up the power system for company projects, both in Singapore and overseas.

Requirement

• Technical Certificate in Electrical Engineering or equivalent. Candidate with not less than 2 years of relevant work experience may apply as well.
• Good understanding and experience on the electrical and mechanical systems
• Available to trouble shoot electrical system.
• Ability to read electrical single-line drawings and provide an overall understanding of the power system involved will be an advantage.
• Experience in LV and MV work
• Must have class 3 driving license

Job Requirements:

• Effective participation and contribution in company Environmental, Heath & Safety programmes such as Lock Out Tag Out (LOTO), permit to work (PTW), Root cause analysis, investigation, Waste Management, Emergency preparedness, Risk assessment (RA).
• Able to control and monitor process through Distributed Control Systems (DCS).
• Effective participation of company safety inspections and follow through in closing the safety findings.
• Effective participation and contribution in Quality Management System (QMS) such as GMP and other Quality standards, Creation of standard operating procedures (SOP), work instructions (WI) and records, In process analysis (IPC), Deviation and CAPA management.
• Carry-out a steady and efficient production to delivery product in time and quality.
• Responsible to monitor and control process units as per SOP
• Responsible to collect data, identify process deviations and corrective actions
• Carry-out the fine tuning of the whole plant to achieve quality and efficient operation.
• Responsible in all process improvements task and projects.
• Responsible to collect samples and perform analysis in Lab.
• Responsible to prepare equipment’s for maintenance activity and perform first level maintenance.
• Responsible for safe start up and shut down of process units.
• Point out to the hierarchy of all dysfunctions of the plant.
• Take part in all company trainings to develop his potential and capabilities in all safety, quality and process topics.
• Part of the Emergency Response Team Member in the Company to react in all sort of emergency and execute function as a first aider.

Job Requirements:

• NITEC / Higher NITEC / Diploma in Chemical Engineering with work experience in the process industry
• Experience in continuous process industry (chemical, pharmaceutical, food)
• Experience in handling DCS system (Yokogawa/Delta V)

Job Descrition

• Perform Level 1 and Level 2 IT support to users in Singapore and Asia Pacific.
• Proactively ensure high value customer service by providing customers with specific delivery times for IT solutions and clear communications, limiting the use of technology terms when not needed.
• Handle users’ requests for install/move/add/change of PC hardware and software.
• IT Asset Management - Perform asset (hardware and software) inventory, tracking and equipment retirement.
• Support the GLOBAL IT Technology refresh projects.
• Monitor and report local inventory.
• Identify and report incidents trends.
• Document processes and work instructions.
• Involve in RFQ activities for IT hardware and software.

Requirement

• At least Diploma in Electronics, Mechanical or Computer Engineering from a local polytechnic.
• At least 2 years working experience in an IT support environment with knowledge on Service Delivery operations and support including incident management in a regional environment.
• Experienced working in a regional environment for a MNC.
• Assist in compiling and analyzing statistical data and trends.
• Excellent Communication skills (both written and verbal), with the ability to interact effectively with others.
• Demonstrated analytic and problem solving skills
• Ability to meet deadlines and manage priorities.
• Technical knowledge of O365 , Microsoft Windows 7 & 10, Office Productivity Suite, Cisco VOIP Phones, Active Directory, PC imaging, Bitlocker .
• Good Knowledge with Symantec Endpoint Protection, PGP, Symantec VIP, Juniper VPN, label printers and barcode scanners.
• Perform other duties as assigned.
• Able to multi-task, is resourceful and keen to learn.
• Strong Customer Service delivery attitude

COMPANY DESCRIPTION

REC Group is an international pioneering solar energy company dedicated to empowering consumers with clean, affordable solar power through high-quality solar panels with a leading power density. As Solars Most Trusted, REC is known for its patented innovations and multiple award-winning products with reliable long-term performance. The cornerstone for RECs strong reliability is advanced and highly efficient manufacturing using Industry 4.0 practices. Founded in 1996 in Norway, REC has always been committed to a low carbon footprint in its solar materials and panels. REC is headquartered in Norway with operational headquarters in Singapore and regional hubs in North America, Europe, and Asia-Pacific. As of December 2021, REC is part of Reliance Industries Limited, Indias largest private sector company with revenues of USD 104.6 billion.

Find out more at recgroup.com

RESPONSIBILITIES

The BA Analyst is the primary contact in REC IT for SAP S/4HANA functional areas and its related integrations. This person is responsible to provide solutions for business needs & support day-to-day operations. It requires to work closely with other SAP Analysts & 3rd party vendors to propose solutions and align steps before execution.

A successful IT BA Analyst must have at least 3 years SAP (or other similar tools) experience in project implementation or in a support role in an end user environment.

Business Analysis & Support

• Resolve day-to-day business application operational issues & requests within SLA.
• Ensure day-to-day activities, projects / change requests are done in compliance with REC IT Control Policies & Procedures.
• Liaise with key users and Business Process Owners (BPO) to identify pain points and problem areas that require IT solution. Then capture specific requirements, propose cost effective solution, coordinate activities and implement.
• Prepare and maintain up to date business process flows, configuration documents, technical / functional specifications, test scenarios / case creation, conduct user acceptance testing & roll-out solutions.
• Establish rapport with end users from different departments, other IT members, and vendors to meet targets & KPIs.
• Submit required documents and reports as and when required.

Problem Solving

• Understands that any given problem may have many good answers, therefore must know how to ask good questions that compel further discussion, research, collaboration and innovation.
• Is attentive to details and has good analytical skills to understand a wide net of interdependencies to be able to identify, clearly articulate, and proactively mitigate risks.
• Empathise with end users in their needs while also able to manage and align business requirements and IT goals.

• Degree in Computer Science, Information Systems or Business related with minimum 3 years of relevant experience
• Well-developed understanding and working experience on SAP (or any other ERP) modules such as PPE (Production Planning & Execution), MM (Materials Management), WM (Warehouse Management), SD (Sales & Distribution), and TM (Transportation Management).
• Experience in SAP IBP (Integrated Business Planning) is preferred but not required, or experience in any other planning tool for Supply Chain Planning such as Microsoft Dynamics 365, Netsuite, IBM, etc. will also be considered.
• Must be able to do basic configurations in SAP or whichever applicable ERP / planning tool.
• General knowledge in business processes associated with the use of SAP and comfortable with manufacturing business terms and concepts.
• Experience in Windows Environment, Visio, Power BI, and other document management / reporting tools.
• Integration experience with other legacy or 3rd party systems.
• Flexibility to meet company timelines and objectives.
• Self-starter that can thrive in a fast-moving environment.
• Have a good sense of ownership.
• Good communication skills and ability to present in small to medium group settings.

Additional advantageous skills:

• Experience in operating an ERP System with integration to an MES System in a 24x7x365 manufacturing environment.
• Preferably at least one full cycle project implementation experience in a manufacturing environment.
• Experience in SAP PO, LSMW, ABAP Query, ALV Reports and iDocs.
• Experience specific to S/4HANA environment and FICO area is advantageous

• Carry out maintenance, repair and overhaul work on heavy vehicles, has diagnostic capability and able to perform major repair on engine and transmission
• Ensure high standard of workmanship and minimize turnaround time for scheduled repairs and inspections to meet workshop’s service standards and according to job order.
• Notify Team Leader of unusual repair problems which will require major repair and replacement parts recommendation.
• Complete work order for each vehicle and unit serviced.
• Adhere to defined guidelines in regards to safety, orderliness and etc.
• To ensure overall customer satisfaction with Company’s Aftersales service
• Diligent recording of all info in service report (mileage, parts list, fault codes, etc)
• Carry out recall /warranty job as documented by MAN
• Ensure 5S compliance
• Other functions as required by superior

Requirements:

• Academic qualification: At least Higher Nitec in Automotive Technology or equivalent
• Competent in basic English (verbal & written)
• At least 3 Years and above of experience in performing automotive service repair.
• Posses of Class 3 driving licence will be an added advantage
• 6 Days work (Monday-Saturday)
• Working Hour (7:30am -5:15pm)

You will be part of an IT infrastructure Support Team managing mission critical high-tech biometrics devices at critical locations of significant national interest. You will be trained to manage, troubleshoot and maintain the operational availability of these devices and to remedy faults to prevent operational downtime.

As an IT Support Engineer, you will be responsible for the following:-

• Support the project teams in the implementation, installation and configuration of PCs/Workstations O.S., applications and related peripheral devices.
• Provide 1st level on-site IT support to the end-users on a 24x7 rotational shift, from 10 am to 10 pm/ 10 pm to 10 am, including Public Holidays.
• The successful applicants should be prepared to be deployed primarily at Tuas Checkpoint. The successful applicant could be deployed to the Tuas checkpoint in the future on a rotational basis.
• Provide findings and timely status updates to the Project Manager on major issues escalated by users.
• Perform daily health checks and inventory checks on the system.
• Experience in installation, configuration, troubleshooting of PC / peripheral devices and application maintenance support will be required.
• Hands-on experience in supporting end-users in a Windows (Windows clients) environment is required.

• Having prior exposure to IT operational environments is advantageous.
• A strong Team player with the ability to collaborate and willingness to support one another.
• Communicates well and has good interpersonal skills.
• independent and has ownership of his/her assigned tasks.
• Certification in Nitec, Higher Nitec or Diploma, ideally with a focus/specialization in IT.
• Have a keen interest in IT Service Management
• Willing to work on rotations.

In the course of your tenure as IT Support Engineer, you will learn and acquire the following:

• Experience in installation, configuration, and troubleshooting of biometrics devices as well as the maintenance of related software applications.
• Hands-on experience in supporting high-tech devices in Windows (Windows clients) environment/platform.
• Understanding of IT Service Management where SLAs (service-level agreements), and KPIs (key performance indicators) need to be managed and adhered to.
• Familiarity with the fundamental scope of work typically delivered in IT Support Services.
• Ability to work under time-sensitive situations.
• Career progression to Lead a team in providing IT Support Services.

Job Description & Requirements

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Job Overview

We are looking for Senior Technician / Lathe machinist / Turner-fitter.

He will be responsible for creating mechanical parts using a lathe machine.

Must be able to read and interpret blueprints, set up the machine, select and change cutting tools, and monitor the process to ensure accuracy and quality.

Must be able to work independently, effectively troubleshoot issues, and have a keen attention to detail.

Primary Responsibilities

• Read and interpret mechanical blueprints to determine specifications and tolerances
• Set up and operate a lathe machine to fabricate mechanical components according to specifications
• Select and install appropriate cutting tools based on job requirements
• Ensure that the workpiece is secured in the machine and adjust machine settings as necessary
• Monitor the machining process and make necessary adjustments to ensure quality and accuracy
• Use precision measuring tools such as micrometers, vernier calipers, and gauges to inspect completed workpiece.
• Maintain a clean and organized work area and perform routine maintenance on machines
• Communicate with team members to ensure that production goals are met

Requirements

Education and Experience

• High School Diploma or equivalent
• Technical or vocational training program completion is preferred
• Prior experience operating a lathe machine is required

Skills and Abilities

• Ability to read and interpret mechanical blueprints
• Proficient in the use of lathe machines and cutting tools
• Demonstrated skill in using precision measuring tools
• Ability to work independently with minimal supervision
• Effective problem-solving and troubleshooting abilities
• Ability to work well in a team environment
• Strong attention to detail

Job Location: Joo Koon - around 1.5 km from Joo Koon MRT.

Description

You will be part of a team in a security firm specializing in supplying the latest security surveillance systems to the Asia Pacific region. Our client has gained a remarkable reputation for their high-performance equipment and comprehensive after-sales technical services.

As a Network Technician, you will be responsible for the following :-

• Be a part of Network Maintenance standby duty rotation that is assigned by the Team Lead.
• Achieve the Service Level Agreement (SLAs) set for resolving single faulty cases. Meet these SLAs to maintain high level service quality.
• Provide 1st Level on-site Network Support to end-users.
• Attend to daily customers' issues reported when not on standby.
• Perform routine tasks to ensure the network's stability and prevent potential issues.
• Identify and resolve issues related to network.
• Manage the allocation of Media Access Control (MAC) and Internet Protocol (IP) addresses to devices on the network.
• Apply software updates or patches to network devices and systems.

• Minimum Diploma Grad with Module in IT and has fundamental knowledge in Network.
• Communicates well and has good interpersonal skills.
• Capable to understanding and implement procedures and instructions given in operations manual.

• A strong team player with the ability to collaborate and willingness to support others.
• Have strong communications skills and ability to resolve issues or inquiries effectively.
• Able to work rotational shifts: 1st Shift (08:00 - 20:00 hours.) & 2nd Shift (20:00 - 08:00 hours).
• The successful applicants for this position should be ready to work primarily at Woodlands Checkpoint. However, they may also be assigned to work at Tuas checkpoint in the future on a rotational basis.

• You will be trained to install, monitor, and troubleshoot network equipment.
• Shift Allowance
• Performance Bonus

Job Description:

We are seeking a highly skilled and detail-oriented individual to join our team as a Quality Control Technician. In this role, He/she will be responsible for documenting and creating comprehensive technical reports & WI (work instruction) related to overhauling of rotating equipment. The reports will serve as critical documentation for our client & the work instruction will be serve as critical reference for our service team. Secondary, he / she would perform acceptance testes for rotating equipment overhauled. Relevant testing training will be provided.

Responsibilities:

1. Prepare & create inspection templates of rotating equipment for service team

2. Gather technical data, specifications, and maintenance records for reference.

3. Collaborate with engineers and technicians to understand the overhaul process.

4. Prepare detailed and accurate technical reports outlining the overhaul procedures, findings, and recommendations.

5. Include clear photographs, diagrams, and charts in reports to support documentation.

6. Ensure that reports adhere to industry standards, safety regulations, and company guidelines.

7. Review and edit reports for clarity, accuracy, and completeness.

8. Communicate effectively with team members to gather necessary information and provide updates on report progress.

9. Maintain a high level of professionalism and confidentiality in handling sensitive information.

10. Any other jobs assigned.

Requirement:

1. NITEC / Diploma in Mechanical Engineering related field

2. Experiences in metrology is highly preferred.

3. Strong technical writing skills with the ability to convey complex information in a clear and concise manner.

4. Proficiency in using software tools for documentation, such as Microsoft Word, Excel, and engineering drawing software.

5. Attention to detail and a commitment to producing high-quality technical reports

6. Basic knowledge to interpreting internationally accepted units of measurement.

7. Basic observation skills to ensure that the measurement devices and equipment are being used effectively.

8. Knowledge of rotating equipment is a plus

9. Ability to work independently and manage multiple projects simultaneously

10. Candidates with no experience are welcome to apply; training will be provided.

Duties & Responsibilities

As an LED Technician, you will be responsible for the installation, maintenance, and troubleshooting of LED lighting systems. Your role involves working with various LED technologies, ensuring optimal performance, and providing technical support as needed. This position requires a combination of technical expertise, problem-solving skills, and a commitment to delivering high-quality LED solutions.

1. Installation and Configuration:Install and set up LED lighting systems in accordance with specifications and industry standards.
   Configure LED controllers, drivers, and associated components to ensure seamless functionality.
   
2. Maintenance and Upkeep:Conduct routine inspections and maintenance of installed LED systems to identify and address any issues promptly.
   Replace faulty components and perform upgrades to enhance system performance.
   
3. Programming and Tuning:Program LED controllers and drivers to achieve desired lighting effects and meet customer requirements.
   Fine-tune LED systems for optimal brightness, color accuracy, and energy efficiency.
   
4. Troubleshooting:Diagnose and troubleshoot technical issues with LED installations.
   Collaborate with cross-functional teams to identify and implement effective solutions.
   
5. Quality Assurance:Ensure that all LED installations meet quality standards and comply with safety regulations.
   Conduct testing and validation procedures to guarantee the reliability of LED systems.
   
6. Documentation:Maintain accurate records of all installations, configurations, and maintenance activities.
   Create comprehensive documentation for reference and future troubleshooting.
   
7. Customer Support:Provide technical support to customers and address inquiries related to LED systems.
   Offer guidance on best practices for optimal system performance.
   

Requirements

• A minimum of 2 years of experiences in LED installation, programming, repair, and maintenance.
• High School diploma or equivalent: additional technical certifications are a plus.
• Strong understanding of electrical systems and wiring.
• Licensed Driver in Singapore with Lorry Driving experience is a plus.
• Effective communication skills for interacting with clients and team members.

Purpose of the Position

Reporting to the Shift Supervisor, the Process Technician's primary responsiblity is to ensure the smooth operation of his/her assigned Process Unit, be it in either the Field or DCS Panel Operation.

Job Description

DCS Operation

• Perform starts up and shuts down according to Standard Operating Procedures, Work Instructions or Checklists.
• Monitor and control process variables via DCS (towers, reactors, driers, compressors, etc) to maintain quality & plant in steady & efficient condition.
• Respond to process alarms, process upsets or abnormal process conditions according to established practices and procedures in order to begin or cease production as advised by Supervisor or Engineers.
• Troubleshoots equipment and/or process problems in order to identify needed corrections or improvements.
• Initiate and perform Safety bypass with approval from Supervisor.

Field Operation

• Performs equipment line-ups and operate towers, reactors, driers, compressors, pumps, etc according to established practices and procedures.
• Responds to upsets or abnormal process conditions according to instructions from Supervisor or Panelman.
• Troubleshoots equipment and/or process problems in order to identify needed corrections or improvements.
• Collect process samples from assigned sampling points in a safe manner.
• Equipment Inspection Tours according to checklist.

Requirements

• NITEC in Chemical Process Technology /Diploma in Chemical Engineering or related discipline.
• Min. 1-2 years Operational experience with demonstrable exposure to Process Plant Operations and site-based activity or equivalent.
• Experience in Safety Awareness programs or involvement in Safety Committees will be an added advantage.

1. Install, service and repair vending machines.
2. Maintaining vending inventories
3. Ordering repair parts and keeping service records
4. Organizing the warehouse space and keeping the cleanliness of warehouse.

5. Always maintain professionalism, tact, diplomacy, and sensitivity to portray the company in a positive manner.

Sample Preparation

· Receive and label all samples brought into the lab for accountability.

· Prepare samples from drying, crushing, splitting and pulverising.

· Mix fluxing reagents and load samples in furnace for the fire assay.

· Mix reagents for acid digestions.

· Perform fire assay techniques such as fluxing, fusing and cupellation of samples in correct numerical order.

· Perform smelting and sample extraction of precious metals as and when required

Setting up of Fire Assay Laboratory

· Assist with the set-up of laboratory, prepare the SOPs for Fire Assay techniques.

Measurement & Calibration

· Monitor analytical processes and take remedial action where deviations / discrepancies arise impacting on the quality of analytical results.

· Report any apparatus or equipment which, to your knowledge, is not functioning correctly to the Lab Manager

Perform Laboratory Data Analysis and Reporting

· Testing of precious metals scraps through cupellation method (fire assaying).

· Evaluate, validate, ensure and report technical accuracy of reporting analytical results

· Monitor analytical processes and take remedial actions where deviations / discrepancies arise impacting the quality of analytical results.

· Re-analyse analysis samples when control results are not within the acceptable range.

Quality Control

· Inspect samples, fusions, lead buttons and prills to ensure the assaying method is correct.

· Maintain records and accountability of materials (samples and standards) and equipment used.

Equipment Maintenance and Troubleshooting

· Report any apparatus or equipment which, to your knowledge, is not functioning correctly to the Lab manager

· Procurement and placement of all consumables, equipment and fixtures.

· Assist in the general / preventive maintenance of equipment and housekeeping of the laboratory.

· Maintain and record equipment faults.

· Troubleshooting of analysis methods.

Laboratory Housekeeping

· Ensure and maintain work areas and equipment are clean, tidy and organised.

Manpower Planning

· Assist with overtime planning in consultation with the Lab Manager.

· Assist with control and time keeping administration.

· Maintain productivity and turnaround time.

Compliance with Safety Protocols and Local Regulatory

· Assist with the application and maintenance of all necessary governmental licenses related to the laboratory. (Eg: DoE, DOSH, BOMBA, Poison Act etc.)

· Promote and implement workplace safety initiatives

· Ensure and maintain proper sample disposal of cupels, fire assay lead

wastes or water generated as a part of daily work performed in a safe manner and in compliance with the disposal regulations and requirements.

· React appropriately and immediately to emergency situations and assists other employees in maintaining readiness to respond to emergencies within the workplace.

Job Requirement

Educational & Professional Qualifications

· Minimum Diploma qualification in Chemistry or its related field.

Relevant Experience

· At least 3 years’ experience as a Fire Assayer.

· Demonstrated understanding of the analytical processes in Fire Assay and the analysis process.

· Problem solving skills.

· Have experience in selecting and setting up of equipment and processes to recover precious metals including gold, silver, platinum, palladium, rhodium is an advantage.

· Possess experience and the ability to operate ICP / XRF is an advantage.

· Must be willing to work overtime whenever necessary.

· Knowledge in safe handling of industrial chemicals.

· Possess effective verbal and written communication skills.

About the Role

As part of our service team, you play an important role in ensuring that our customer's systems are in tip top shape. You'd be in charge of installation, upgrades, troubleshooting, maintenance & training.

There will be opportunities to enhance your competencies through our training programs as well as increase your exposure to different work settings and cultures.

Job Description

• Perform preventive & corrective maintenance, installations, training, upgrades & troubleshooting of various systems
• Provide technical support to our team of engineers & other departments when required
• Ensure compliance with health, safety, and environmental regulations at customer site
• Perform site reviews, surveys and inventory checks to ensure equipment and systems are in working order
• Carry out any ad-hoc project, assignment, maintenance or repair work assigned
• Ensure complete documentation of procedures and maintenance works

Requirements

• Minimum Nitec / Higher Nitec or Diploma in Engineering
• Good observation and analytical skills
• Ability to interpret technical drawings and diagrams
• Familiarity in troubleshooting techniques
• Proficient in written and spoken English
• Class 2B/3 driving license and have own transport is a plus
• Able to work rotating shift if required
• Able to do standby duty and OT on short notice
• Knowledge of computer & networking would be a plus
• Working knowledge of banking & ATM related software and hardware systems would be an added advantage

Key Responsibilities:

· Maintaining and setting up equipment and process solutions

· Operate copper plating equipment and process in accordance to instructions

· Perform quality inspection and generate documentation, records and reports

· Troubleshooting and discuss technical problems

· Performing titration activities and maintaining detailed chemistry logs

· Hazardous waste management and handling

· Be strictly compliant to all safety working procedures and 5S

Qualifications :

· ITE in Chemical Engineering or equivalent

· Possess certification in Management of Hazardous Substances

·

Experience :

· Minimum 2 – 3 years related experience in plating industry

· Basic knowledge of electroplating theory and chemistry

Job Description & Requirements

• Troubleshoot electrical devices, circuit breaker, relays sensors, motors and etc.
• Repair malfunctioning equipment, appliances and apparatus Assemble evaluate, and maintain electrical wiring, apparatus, and equipment
• Inspect and conduct preventative maintenance checks to reduce abrupt breakdowns
• Respond to breakdowns, diagnosing faults and record Perform electrical and instrumentation troubleshooting and repair work downtime
• Communicate with relevant authorities, internal amd external customers on all related matter
• Work independently to operate and test assigned machinery for safety and efficiency
• Other ad-hoc duties as assigned

Requirements

• ITE or Diploma in Electrical & Electronics Engineering
• Minimum 10 years of hands-on working experience as electrical technician
• Essential prerequisites include good analytical & problem-solving skills, ability to communicate with co-workers in different functions & contractors, and strong spirit of collaboration & team-work.
• Able to work independently with minimum supervision
• Ability to communicate in a clear and understandable manner
• Responsible and honest

Skills

• Preventive Maintenance
• Troubleshooting
• Electrical Wiring
• Inventory
• PLC
• Sensors
• Cabling
• Instrumentation
• Assembly
• Manufacturing Electrical Engineering
• Electronics
• Commissioning
• Switches
• Vacuum Pumps
• Test Equipment
• Safety Training
• Able To Work Independently

NOTE:- The manufaturing plant is located in Pioneer Crescent