As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent with at least 5 years of relevant experience
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

• You will work include face-to-face and remote selling to both new and existing customers including selling directly to the end consumer/business purchaser or indirectly through various sales channels.
• You will assess customer needs and suggesting appropriate products, services, and/or solutions.
• You will be developing, delivering sales bids, presentations, proposals and conducting product demonstrations.
• You will identify, contact prospective customers, building relationships to generate future sales and repeat business Incumbents matching to this specialization are compensated based on achievement of sales targets.
• You will manage projects / processes, working independently with limited supervision, coach and review the work of lower level professionals and problems faced are difficult and sometimes complex.
• Living Hitachi energy's core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business.

Requirement

• Minimum Degree in Engineering with 3-5 years experience. Entry level candidates are welcome to apply.
• Ability to work collaboratively with employees within department and across functions.
• Possesses excellent interpersonal, communication, problem-solving skills and capable of working effectively under own

Job description

Responsibilities

• Respond to telephone/online catering sales enquiries
• Build and maintain good client relationship and rapport
• Solicit new corporate clients through cold calling and sales visit
• Assist clients in professional event planning, packaging and menu selection
• Keep abreast of trends and developments in catering industry
• Actively brainstorming of creative ideas in improving catering services to clients
• Account for sales and profitability of event orders and ensure smooth operations of catering functions

Requirements

• Possess O Level / Diploma / Degree in Business, Marketing with at least 5 years of relevant experience in F & B industry will be an advantage
• Able to converse effectively in English and Mandarin to manage Mandarin speaking clients
• Self discplined, proactive and have strong sense of urgency
• Must be self-driven, dynamic, meticulous, creative and sales oriented
• Outgoing personality, highly motivated, independent individual and yet an inclusive team player

Working days: 5 days

Location

• Located in the West (Pandan Loop)

Interested candidates are invited to apply online with a comprehensive resume, via the APPLY NOW button below.

We regret that only shortlisted candidates will be notified.

Thank you for applying

Job Types: Full-time, Permanent

Salary: $3,000.00 - $4,000.00 per month

Are you a software engineer passionate about building high-quality code with a real-world impact? Join a world-class team that uses NASA satellite data to prevent greenhouse gas emissions and transboundary smoke haze. We are a small, collaborative group in which you will be exposed to and learn from engineers and scientists from MIT, Stanford, NTU, and NASA while building a dynamic geospatial application for nature restoration and carbon projects.

Responsibilities

1. Lead the design, implementation and testing of the analytical engine for a geospatial web application based on cutting-edge algorithms.
2. Interact with a full-stack developer, users and scientists to gather requirements and iteratively improve capabilities and efficiency.
3. Maintain quality by participating in code review and setting up and maintaining test frameworks.

Skills and Qualifications

1. Bachelor’s degree in computer science, information technology, or a related field.
2. Work experience in developing computational code as evidenced by one or more applications or prototypes.
3. Familiarity with back-end development using modern platforms.
4. Training in data modeling and SQL and experience with database management systems such as PostgreSQL.
5. Familiarity with version control systems like Git and test- and documentation-driven development.
6. Languages and technologies:Python
   SQL
   Git
   
7. Advantageous:Cython
   C, C++, modern FORTRAN, or Julia
   PostgreSQL
   GDAL, PostGIS, GRASS, QGIS
   Linux packaging and deployment
   Familiarity with physics and linear algebra
   
8. Quality traits we are looking for:Understanding of software development fundamentals
   Organisational skills: setting and achieving short- and medium-term goals

To apply, please visit our website at: https://portal.smart.mit.edu/careers/career-opportunities

Interested applicants are invited to send in their full CV/resume, cover letter and list of three references (to include reference names and contact information). We regret that only shortlisted candidates will be notified.

Rapsodo is a Sports Technology company with offices in the USA, Singapore, Turkey & Japan. We develop sports analytics products that are data-driven, portable, and easy to use to empower athletes at all skill levels to analyze and improve their performance. From Major League Baseball star pitchers to Golf tour players, athletes use Rapsodo technology to up their game across the world. Trusted by coaches and players from youths to professionals, Rapsodo provides real-time insights for all-time performance.

We are innovative, focused, and rapidly growing. We are continuously looking for very driven team players who will stop at nothing to deliver state-of-the-art solutions as part of Team Rapsodo.

We are seeking an IT Specialist to be part of our global team responsible for managing policies and procedures.

Key Responsibilities:

• Monitoring and configuration of WAN & LAN connections and devices
• Monitoring firewall logs and maintaining backups
• Managing of Microsoft 365 accounts & licenses
• Responsible for all hardware & software assets, IT inventory and licenses
• Troubleshoot, install, repair, and deployment of workstations (desktops/laptops/servers)
• Applying information security procedures and practices to IT infrastructure
• Providing Level 1 and 2 support to global service desk operations
• Deploying and configuring existing and new business processes

Skills & Qualifications:

• Minimum 1-3 years of relevant working experience
• Creative, solution-oriented, open to innovations, constantly following technology
• Sound understanding of network and internet access such as WAN & LAN, TCP/IP, SSL, firewalls and VPNs
• Must have experience with MacOS/iPadOS/iOS devices
• Must have experience with Linux OS devices such as Ubuntu
• Familiar with Microsoft 365 administration
• Experience in setup/configuration of antivirus & anti-spam applications
• Experience with backup process and tools
• Working knowledge of requirements of ISO 27001 & PDPA
• Familiar with business process management & corporate IT procedures

On behalf of our hiring client who is an Original Equipment Maker (OEM), we are looking for a suitable candidate to join them as Product Design Engineer (Electrical).

Responsibilities:

• Provide technical support to the Project team, Installation on problem verification, report and coordinate with Group on job site issues and technical solutions related to electrical design.
• Involving in design interfacing and parts provision among Group of companies.
• Participate in the resolution of design problems related to Error/Trouble investigation, and formulate corrective & preventive measures.
• Provide engineering support to Marketing and Sales staff for new products.
• Provide Maintenance Works Inquiry/Spare Parts Inquiry/Order Supports.
• Any other ad-hoc matters assigned by the Manager.

Requirement

Degree/Diploma in Electrical Engineering with at least 2-3 years experience in electrical design work.

Proficient in Auto CAD & 3D software is essential

EA license : 22C0971 | EA Registration : R21101298

Location: East

Job Description :

• Manage customer orders from inception to delivery and through the entire order-to-cash cycle
• Liaise with other teams to resolve requests/issues in a timely manner
• Administer return processing & credit/debit price adjustment
• Expedite and track customer orders: answer inquiries ( through e-mail, whatsapp, etc. )
• Take corrective actions to resolve customer issues or order fulfilment inefficiencies
• Ensure compliance to all company and business policies and administer all open sales order and ensure appropriate order flow

Requirements :

• Good working knowledge of Microsoft Office and systems used within Customer Service systems with expertise to assist less experienced colleagues
• Min Diploma in Business Admin / Supply Chain
• Minimum of 1 year previous Customer Service experience in an F&B / FMCG environment including management of complex/challenging customer issues
• Experience of encouraging others to work to KPI’s/SLA’s
• Creative thinking ability with proven problem-solving skills including developing new ideas and making projects

-Working Location: Ryan’s Kitchen – 1 Kim Seng Promenade, Great World City #B1-146

-Full Time: 2 Shifts available – 8am to 6pm or 12pm to 10pm,

-Basic salary up to $2200.00 depends on experiences.

-Entitled to OT payable once exceed 44 hours per week.

-Part Time: Working hours is from 10am to 7pm with hourly rate between $11 to $14 depends on experiences. Minimum must be able to commit 4 days and above.

Key Responsibilities

• Assisting in daily restaurant operations – including preparation of tables, serving

foods & beverages, and taking orders.

• Always provide friendly customer services standards.

• Maintain a high standard of cleanliness in and around restaurant.

• To provide any other ad. Hoc duties as required by superior or Head Chef.

• Able to speak well and doing recommendation to our guests as well as advising them our on-going promotions.

• Inputting of customer orders accurately into POS (Point-Of-Service) system, settling the bills with guests.

• Attend and promptly respond to guest for any queries and needs.

• Present tidy appearance by wearing uniforms and neat looking.

Requirement

• Good command of English (written and spoken) & communication skills.

• Positive attitude and ability to work under pressure and fast-paced environment.

• Good team player and self-motivated

• Able to commit work on weekends, public holidays.

• Will or without experiences are welcome to apply.

We are looking for a committed Chinese Language TEACHER (A-Level) to complement our qualified workforce of educators.

Location: East (nearest MRT Tampines West DT31)

Responsibilities:
You will be responsible for preparing and implementing a full educational teaching plan according to the school’s requirements. It will be fundamental to provide knowledge and instruction to students while also helping them develop their personalities and skills.

Specifically:

– Prepare and conduct lessons according to the course syllabus and scheme of work.
– Deliver lessons and provide the necessary supervision to students as a mentor or form teacher.
– Provide necessary supervision to the students, manage the classroom, and address discipline issues.
– Prepare and mark examination papers and assignments.
– Monitor the performance and progress of each student and provide academic counseling.
– Teach students according to their aptitude (Differentiated Teaching)
– Perform Intervention duties: Identify and discuss students’ academic and pastoral needs with parents/academic team/student relations to find a way to help students.
– Attend team meetings and staff development workshops.
– Support scheduled school holistic activities when directed to do so.
– Oversee and advise the assigned non-academic / Co-curricular activities.
– Enable students to attain projected subject results.
– Collaborate with the team in curriculum development, appraisal system, and project management.
– Perform any other tasks as may be assigned on an ad-hoc basis as needed.
– Achieve assigned key performance indicator target.

The ideal candidate:
You must be passionate about the job with an ability to reach out to students and create a relationship of mutual trust. You must know how to organize a class and make learning an easy and meaningful process. Your goal is to help cultivate the students’ interest in education and be their dedicated ally in the entire process of learning and development.

Skill and experiences:
– Bachelor’s degree relevant to the subject to be taught. A Master’s Degree will be advantageous.
– Minimum 1 year of teaching experience in Cambridge A Level / GCE “A” Level in a school setting.
– Ability to inspire students’ interest in learning and create a strong affinity with the students.
– Excellent written and verbal communication and interpersonal skills.
– Self-motivated, logical thinker, team player.
– Former MOE school teachers and NIE-trained teachers will be preferable.
– Must be fluent in Mandarin and English to communicate effectively with Mandarin-speaking students ( Students are all Mandarin-speaking).

Additional information:
Career level: Junior Executive
Qualifications: Bachelor’s Degree, Post Graduate Diploma, Professional Degree, Master’s Degree.
Years of experience: (1) one year

Roles & Responsibilities

Job Description：

• Understand client requirement & take charge of given tasks.
• Follow-up & support customers.
• Collaborating with other departments to ensure sales, queries, and deliveries are handled efficiently.
• Liaison between client, designer and other parties leading up to the project, ensuring client’s requirements are met and exceeded.
• Prepare necessary product & material base on requirements.
• Support activities, manage & maintain customer requirement and relationship.
• Collate & evaluate customer feedback and requirement of customer.

Job Requirements：

• 1-2 years of relevant experience preferable.
• Fresh graduate is welcome.
• Training will be provided.
• Study in Project Manager or Interior designer welcome to join.
• Able to Work independent and initiative.
• Strong communication skills & Self-discipline.
• Active listening skills & proactive communication.
• Immediate available position.

Kindly provide your details in resume:

- Photo

- Experience & Qualifications

- Current & Expected salaries

- Date availability / Notice duration

In this position as part of IME’s Advanced Process Module department, you will be focusing on SiC epitaxy process development for next generation SiC power MOSFETs. You will work closely with IME’s silicon carbide process integration & device design team as well as key customers.

Responsibilities:

• Development of CVD processes for high-quality SiC epitaxy on 6/8-inch substrates, with emphasis on high dopant & thickness uniformity and low extended defect density.
• Metrology and characterization of SiC epilayers (e.g. epilayer dopant & thickness uniformity, surface roughness, crystal quality, stress, carrier lifetime, etc.).
• Quality and process deviation/ issue troubleshooting.
• Provide technical support for process transfer to internal fab and external customers.
• Prepare Standard Operation Procedure (SOP), Out of Control Plan (OCAP) and others technical documentation for low volume prototyping.
• Correlation of SiC extended crystal defects (type and density) with MOSFET performance & yield, and with MOSFET processing conditions.
• Design of experiments to minimize SiC point defect and extended defect density in SiC epilayers with emphasis on enhancing SiC device performance.
• Simulations (Kinetic Monte Carlo & Computational Fluid Dynamics) for improved SiC epilayer uniformity and reduced defect density.
• Preparation of technical presentations and papers for internal meetings, as well as conferences and journals.
• Working with IME's power electronics related team to solve key technical challenges in the SiC power electronics industry.
• Hands-on working on SiC epitaxy tool
• Leading epitaxy development related projects, work packages of a project.

Qualifications:

• PhD in Materials Science / EE / Physics or equivalent with minimum 5 years' hands-on experience in SiC/GaN epitaxy and materials characterization.
• At least 8 - 10 years of relevant experience
• Strong communication, industry awareness, and problem-solving skills.
• Highly motivated to succeed, a self-starter who is driven and able to work with others effectively to "get things done".
• Industry experience is a plus.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

JOB DESCRIPTION

The candidate is expected to contribute to IME in:

1. Electrical test on 12" wafer for IV-CV measurement

2. CSAM operation

3. ESD test

4. Reliability chambers operation

5. Other lab related paper work

JOB REQUIREMENT

1. Bachelor’s Degree or Polytech in EE & EEE background

2. Able do some computer programming

3. Ability to work effectively and independently

4. Ability to communicate and interact with staff and industry personnel successfully

5. Able to do some shift work requirement occasionally

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description

The National University of Singapore invites applications for Research Assistant for “Mechanistic study of therapy-resistance in gynaeoncology and its clinical application in molecular prognosis and novel therapeutic strategy” in the Department of Biochemistry, Yong Loo Lin School of Medicine. Appointments will be made on a 1-Yr contract basis from Jan 2024, and can be renewed for another two years.

Main duties and responsibilities

The Research Assistant will be able to:

1. Provide research support to the project in both cellular studies and in vivo mouse study and conduct a research project independently.
2. Provide administrative duties such as maintenance of safety documents and housekeep of wet laboratory and supervise junior research staff or undergraduate students/interns.
3. Maintain the highest standard of professional conduct and record keeping in accordance with policies and procedures.

Qualifications

1. Bachelor degree in life science and biomedical degree.
2. At least 3 years of cancer research experience and able to work independently and in a team, have an investigative nature, attention to detail, demonstration of writing scientific papers with list of relevant publication.
3. At least 2 years of animal experience in mouse model of cancers and familiar with immune cell profiling of murine tumor models.
4. Great skills in tissue culture and cellular/molecular biology and protein chemistry basic techniques including Western Blot, viral transfection, q-RT-PCR, immunohistochemistry, and flow cytometry.

Application

Formal application: Interested individuals should send an application including a cover letter (with statement of research interest and career goals), curriculum vitae including personal particulars, academic and employment history, current/expected salaries, complete list of publications/oral presentations, and the contact information of three referees in one single PDF.

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description & Requirements

Cook cum cleaner at Childcare Centre in Tampines

To prepare breakfast, lunch and tea break.

To maintain cleanliness in the kitchen, storeroom and to take charge of groceries.

Must clean the workplace and follow heath and safet guidlines.

To follow all sanitation procedures.

Work as a team with the cleaners.

7 - 4.30 pm

GOOD MONTHLY INCENTIVES besides monthly salary payout

Responsibilities:

Production Support:

• Assist in the day-to-day operations of an innovative plant-based food production facility.
• Work with the production team to meet daily, weekly, and monthly production targets.
• Operate machinery and equipment in accordance with safety guidelines and company protocols.
• Ensure the efficient use of resources and minimize waste in the production process.

Quality Control:

• Conduct regular quality checks on raw materials, in-process items, and finished products.
• Follow established quality control procedures to uphold product excellence.

Inventory Management:

• Monitor and manage inventory levels of raw materials and finished goods.
• Assist in conducting regular inventory audits and report any discrepancies.
• Coordinate with the procurement team to ensure timely replenishment of materials.

Safety, Compliance, Reporting:

• Adhere to safety protocols and guidelines to maintain a secure work environment.
• Maintain accurate records of production activities, including batch records and production logs.

Qualifications:

• Previous experience in a production or manufacturing environment is preferred.
• Knowledge or interest in plant-based products and sustainable practices.

• Assist TCM Physician in TCM treatments; 协助医师进行中医治疗
• General housekeeping of the clinic including tidying of reception area, consultation and treatment rooms; 诊所的日常整理，包括整理接待区，咨询室和治疗室
• Have Professional Certificate/NiTEC in massage is an advantage; 拥有专业证书/ NiTEC按摩有优势
• On the job training provided; 提供的在职培训
• Must be able to commit on Weekends and Public Holidays; 必须能够在周末和公共假期工作

Job Scopes 工作范围

1) Teaching lessons to various levels of classes 教课程 向不同级别的课程教授课程

2) Class teacher in charge of all matters relating to children welfare and routine care 负责与儿童福利和日常护理有关的所有事项

3) Assist other teachers to help out in other classes 协助其他老师，帮助其他班级

4) Prepare lesson plans for the class(s) in charge 为负责的课程准备课程计划

5) Excellent communication and classroom management skills 优秀的沟通和课堂管理能力

6) 44-48 hours per week 每周 44-48 小时

Salary Depending on Experience and Qualification

Responsibilities

• Collaborate closely with senior management to assess and enhance company-wide people practices.
• Develop comprehensive strategies spanning talent acquisition, development, organizational culture, and performance management.
• Innovate by designing new people systems, programs, and practices to align with the company's strategic growth, while also reviewing and enhancing existing policies and processes.
• Engage with business leaders to identify key issues and implement customized solutions hands-on.
• Utilize people analytics to inform management decision-making.
• Stay informed on industry benchmarks and best practices in people strategy, operations, and organizational development through ongoing research.

Requirements:

• Minimum Bachelor Degree in Business Studies or any relevant course
• Minimum 3 years of relevant experience
• Experienced in crafting methodologies and frameworks for analyzing complex people-related issues, leading to actionable recommendations.
• Demonstrated capabilities in strategic and critical thinking, adept analysis, effective communication, and skilled stakeholder management.
• Proven track record in successfully managing intricate and scalable HR projects.
• Possessing a self-starting, resourceful, and flexible approach, with an independent mindset, capable of thriving in a fast-paced and dynamic environment.

I regret to share that only shortlisted candidates will be notified.

www.dadaconsultants.com

EA Registration Number: R21100604

Data provided is for recruitment purposes only

Business Registration Number: 201735941W.

Licence Number: 18S9037

• Oversee administrative tasks such as appointment scheduling;
• Support TCM Physician by assisting with the maintenance of accurate documentation;
• General housekeeping of the clinic including tidying of reception area, consultation and treatment rooms;
• Have knowledge of pain management can be a significant advantage;
• Must be able to commit on Weekends and Public Holidays.

GetGo is Singapore’s largest and fastest-growing carsharing platform that enables everyone with the freedom to drive without the burden of ownership. Our vision is to be APAC’s #1 carsharing platform as we seek to create a mobility ecosystem that's shared and sustainable for all.

As a member of the Customer and Service Excellence team, you will be the bridge between the GetGo community and various business functions such as Operations, Marketing, Enforcement, Tech, and Customer Service. You will adopt a data-driven and community-centric approach to build and nurture hundreds of thousands of customers across their journey with GetGo.

Day to Day Activities

• Provide excellent customer service to GetGo’s customers
• Achieve meaningful objectives as part of a mission-driven and values-based organisation
• Share clear and accurate information when attending and responding to queries on GetGo’s official communication channels, including but not exclusive to live chat and emails
• Resolve customer enquiries and disputes efficiently, and escalate issues promptly when required
• Conduct customer experience audits with customers
• Encourage and influence an excellent service mindset in the CX team and affirm positive behaviour
• Support Team Lead in the running of day-to-day operations

Who We Are Looking For

• Passionate team member who loves to serve
• Minimum three (3) years experience as a Customer Support Specialist or similar CS role, preferably with live chat support background
• Experience using help desk software such as Intercom and/or Zendesk is preferred
• Proficient in using Microsoft Office applications such as Excel, PowerPoint, Word
• Excellent verbal and written communication skills is a must
• Comfortable working on weekends

Why You Should Join Us

• Be part of the fastest growing and largest carsharing technology company in Singapore
• Achieve meaningful objectives as part of a mission-driven and values-based organisation
• An opportunity to experience an open, inclusive, and culture-first work environment

Strong Personal Alignment With Our GetGo Values

• Get it going!
• Stay curious and humble
• Drive innovation & improvement
• Keep it simple
• Empathise deeply
• Collaborate for success
• Enjoy the ride

Key Responsibilities

• Support key business processes and applications through hands-on configuration and development, coordination of new development requests, and management of application integration to Salesforce
• Provide and design solutions and required architecture to business requests for Salesforce environments
• Develop and review specifications for enhancements to Enterprise Applications and associated database environments
• Design and build high-performance, reusable, and reliable Apex code with best practices
• Translate requirements defined in business, functional, and use case documents or operational artifacts into solutions in the Salesforce Platform
• Develop and execute comprehensive system test plans, conditions, test scripts, and test cases
• Recommend and facilitate best fit solutions through accurate assessment of workflow, data, and other process related problems
• Test bug fixes to ensure performance success as per requirements and deploy them to production
• Complete regular internal system audits and prepare for upgrades
• Collaborate with business partners to establish suitable processes to support development and change management activities
• Assist in the creation and delivery of related user documentation and end-user training to grow the Salesforce skillset and adoption across the organization

Qualifications

• Bachelor's degree in Computer Science, Information Technology, or a related field.
• Minimum of 2 years of experience as a Salesforce Developer with extensive Salesforce experience with exposure to various SFDC clouds
• Expertise in creating Lightning components (Aura knowledge is a must, LWC will be additional advantage)
• Knowledge of Public Sector Solutions (PSS) is an additional advantage
• Apex Enterprise Patterns Knowledge/Experience
• Well versed in any modern IDE (like VS code) and familiar with Git/Bit Bucket
• Expertise in providing solution for complex requirement
• Proven track record achieving desired business outcomes through defining system architecture, identifying gaps between current and desired end-states, and delivering comprehensive solutions
• Extensive experience developing advanced Apex, Lightning Web Components, advanced complex triggers, Visualforce pages, SOQL, scheduled batch jobs, and SOAP/REST Integrations
• Professional experience authoring requirements, definition, design, and other related project and system documentation
• Demonstrated ability to effectively identify and translate user requirements in business, functional, and test scenarios for project of various sizes and complexity
• Ability to leverage customization of Salesforce objects, Salesforce workflows, and Process Builder to automate processes and improve Service productivity/adoption
• Hands-on experience in data management including uploading/cleaning-up data using data loader, creating validation rules, pick list values, and lookup filters to ensure data quality
• Demonstrated experience designing custom objects, custom fields, picklists, page layouts, workflow, approval processes, validation rules, custom tabs, Visualforce pages, and email generation according to application requirements
• Strong knowledge of Salesforce configuration capabilities and be able to recommend best practices and identify areas where custom development is required

Responsibilities:

• Backend web and API development using C# .Net Core, connecting to MS-SQL on-prem database for data storage.
• Frontend Single-Page-App and mobile web development using React.js, React Native, mithril.js.
• Work in a team of 9 developers to ensure timely and quality delivery of solution.
• Communicate clearly with users, team members, management, and all stakeholders.
• Daily operation support – VOC, customers enquiry, batch job monitoring, etc.
• Project development.
• Cloud development.

Requirements:

• Diploma/Degree in information technology or equivalent knowledge to IT.
• At least 6 to 8 years of relevant working experiences.
• Good working knowledge of ASP.Net in C#, Web API, CSS3, HTML5, javascript.
• Good working knowledge of MS-SQL 2019 and above (Store Procedure, Complex Reporting Query).
• Good working knowledge of single-page-app development in either Angular, React, Vue.js or mithril.js.
• Java programming knowledge - for software exam pre-requisite.
• Experience in Retail and Marketing system.
• Strong in SQL Stored Procedure and good in SQL Performance Tuning is an added advantage.
• Fully work in office. Working location: Mapletree Business City, Pasir Panjang.

Please apply via direct application on this MyCareersFuture website.

Or, email your CV and indicate Job Title as email subject to the following: [email protected]

What’s the role?

• Operating process units within the Production Area to achieve Shift Plan in accordance to Daily Operating Instructions, Standing Instructions and Site Health, Safety, Security, Environment procedures.
• Operating the plant optimally within alarm, Design-Operating-Window and the Integrity-Operating-Window.
• Perform structured rounds (DCS Panel/Field) for field data logging and proactive monitoring. Take corrective action to maintain equipment and plant operations within optimal operating windows. Raise GSAP notifications for defects/maintenance issues with preliminary assessment of work order prioritization.
• Managing plant and equipment upsets, abnormal conditions and subsequent troubleshooting including incidents/plant emergencies and subsequent follow-up. Perform initial troubleshooting of more challenging/abnormal issue/high risk task (e.g. valve passing, leak, test point or drain line choked etc.).
• Update operating procedures, prepare job pack documentation and execute them for equipment maintenance
• Carry out operational activities like sampling, equipment decontamination and isolation for maintenance, equipment commissioning, critical activities go and see etc.
• Participate in shutdown and start-up of units with thoughtful compliance to procedures.
• Perform the role of Authorized Gas Safety Tester (AGST) which includes conduct gas testing, providing oversight of critical activities and incompatible activities, issuance of permits for safe execution of maintenance tasks and turnaround activities
• Participating in minor maintenance activities and maintain good housekeeping.
• Keeping log records of operational activities for optimal and thorough handover to other shifts.
• Support team shift plan delivery and competency development proactively.
• Share observations of good practices, unsafe acts/conditions, near misses and incidents. Support shift 5 why to understand the root cause of PQ/DOW/upset incident occur within the shift to capture and facilitate learning across shift.
• Perform the role of Auxiliary Fire Fighter if assigned in the event of emergency situations
• Apply emerging technologies to perform process operational tasks
• Carry out/Perform other related duties when required
• This role will be based in Pulau Bukom, on a rotating 12-hour shift.

What we need from you?

• Ready competency to independently operate Bukom PHU/BEU or BDX unit is a must. Overall minimum 5 year of experience in Ethylene Cracker and Utility Complex.
• A strong and felt commitment to HSE and Operational Discipline (Knowledge, Commitment, Attention to Details, Situational Awareness).
• Strong problem-solving skills, good technical and process aptitude to assist troubleshooting and coaching shift personnel, and ability to remain calm and composed during abnormal situations to make informed and risk-balanced decision.
• Demonstrate proactiveness, learner mindset, approachable and inclusive behaviour.
• Demonstrated strong team player behaviour with good communication skills (both written and verbal).
• Digital skills and aptitude are beneficial.
• Flexible to perform both shift work and day-work, and overtime when the need arises.

Responsibilities

• Perform equipment installation, tool improvement activities, maintenance, alarm compilation of equipment
• Perform repair, troubleshooting of equipment to minimize downtime
• Identify equipment failures, pareto of issues and weak point analysis for improvement
• Drive continuous improvement program, cost reduction, yield & OEE improvement
• Generate technical reports of the equipment

Requirements

• Bachelor of Electrical/ Electronics/ Mechanical/ Mechatronic Engineering
• Diploma in Engineering with at least 3 years of equipment maintenance experience will be considered
• At least 2 years experience in Semiconductor Industry
• Willing to commit for overtime when required

1. Assembling cakes according to flavour

2. Frost cakes according to their correct colour

3. Decorate cake and 3D cakes

4. Ensure cleanliness in your work station

You know you are suitable if:

1. You are efficient and productive

2. You have great work flow organisation

3. You are motivated and driven

4. You are meticulous and pay attention to the small details.

5. You know minimally basic english or terms relating to cakes

Specialise in:

Must have strong skillset for Dough for tart shells

Must have strong skillset for Dough for puff pastry

Good to have skillset for cakes