About NSING:

As part of Nations Technologies Group, NSING was founded in 2018 in Singapore bringing high-performance semiconductor products and solutions to global semiconductor industry. Our products includes General and Secure MCU, Secure IC for TPM (Trusted Platform Module), Bluetooth Low Energy BLE and BMS (Battery Management System). When you join NSING, you will be part of a talented team in the Singapore R&D Center where we develop high performance MCU targeting for Industrial and Edge AI applications.

Your Role:
As an Embedded Software Engineer, you will contribute to the development of application test software, device drivers and customer reference software. You will be working in various aspects of the SoC development in FPGA prototyping, post silicon validation and customer reference applications.

• Work closely with SoC Design and Verification engineers to develop a comprehensive and complimentaryvalidation test plan.
• Participate in SoC design reviews to have in-depth understanding of the chip.
• Participate in PCB design review to provide requirements from software perspectives.
• Develop Hardware Abstract layer drivers for in-house testing as well as production ready SDK for customers.
• Validate new and existing hardware IP on FPGA prototype and actual silicon.
• Validate system level performance and test for robustness of SoC.
• Working with Product and Application team to develop software for the customer reference design in areas such as motor controls, Human Machine Interface (GPU), Edge Machine Learning applications.

Your Skills and Experiences:

• Bachelors or Master's degree in Electrical Engineering, Computer Engineering, or a related field.
• Minimum 3 years in firmware development in ARM-based MCU products.
• Minimum 2 years’ experience in the Semiconductor industry or equivalent technical knowledge/experience in electronics circuit design.
• Understanding of ARM architecture, heterogeneous multicore system, and communication interfaces such as USB, Ethernet, CAN, Bluetooth, SPI, I2C, UART, SDMMC will have an added advantage.
• Understanding of DVP, Graphics accelerator and machine learning models deployment.
• Worked with RTOS, device drivers, filesystems, HAL, security, and Software development cycle.
• Proficient in programming language of C, C++, and assemble language.
• Proven experience in common firmware development tools and lab tools, such as IDE (KEIL, IAR, GCC), Debugger (ULink, JLink), Lab equipment (Oscilloscopes, Programmable power supplies, Logic Analyzers etc.).
• Good with Electrical interface, schematic, electronic component specification and datasheet.

Other Skills:

• Strong analytical and problem-solving skills, with a keen attention to detail.
• Excellent communication and teamwork skills, with the ability to collaborate effectively in a cross-functional environment.
• Flexibility and adaptability and demonstrates ability to manage multiple tasks and projects, prioritizing effectively to meet deadlines.

NetVirta is a fast growing, venture-backed startup in the fashion fit technology space. If you’ve had difficulty shopping online because you couldn’t find clothing or footwear that fit, you’ve experienced the problem we address. It’s an issue that troubles shoppers around the world and NetVirta is uniquely positioned to solve it.

Founded by two MIT graduates and located in Boston and Singapore, NetVirta is the world’s leading fit technology provider for medical, retail and sports equipment brands, helping customers order the right size with precision 3D body scanning. We began serving the medical industry in 2013, helping doctors scan medical patients to create custom-fit orthotics and prosthetics. In 2017, we expanded to enable NFL and NCAA football players to obtain custom-fit helmets. Fast forward to 2022, NetVirta’s closed deals with multiple clothing and footwear brands in North America, Europe, and Asia.

We are proud to be certified as Great Place to Work® in Singapore.

What can you expect?

We are seeking a Machine Learning Engineer / Researcher who will lead the development and deployment of advanced machine learning models to power our recommendation system and search engine. In this role, you will have opportunities to work with state-of-the-art AI techniques, including large language and vision models, integrating them to complement our recommendation system and search architecture. You will also play a vital role in maintaining and evolving our AI systems throughout the different growth stages.

Responsibilities

• Build scalable recommendation and search engines tailored to fashion content.
• Lead the design, development, and optimization of machine learning models, especially in the context of fashion recommendation systems and search engines.
• Integrate various techniques to help tackle cold start problems, including

1. Content-based recommendation
2. Leveraging implicit user interaction signals
3. Large language (vision) models

Required Skills & Experience

• Bachelor’s, Master’s or PhD degree in Machine Learning, Computer Science, or a related field.
• Experience with Python and machine learning frameworks (eg., TensorFlow, PyTorch).
• Prior hands-on experience with recommendation & search systems and knowledge of its key components (retrieval, re-ranking, cold-start, etc).
• Familiarity with using large language models and computer vision techniques.
• Ability to collaborate in a fast-paced, cross-functional environment with strong communication and teamwork skills.

Good-to-Have

• Knowledge of reinforcement learning (e.g. multi-armed bandits and related techniques).
• Prior industry experience with A/B tests in the context of recommendation systems.
• Good understanding of the infrastructure behind large-scale recommendation and search systems.

What else is awaiting you?

• Career development opportunities, like mentoring, career exploration through a Japanese concept called Ikigai.
• Learning is fundamental to our culture, your growth together with Netvirta's are paramount to how we can transform the industry.
• Besides hard work, we value your well-being and want you to have fun too! Attractive compensation and benefits as well as engagement and welfare activities awaits you.
• Work alongside with friendly colleagues in a positive environment.

We are seeking dynamic professionals to join our claims team in our corporate managed healthcare business segment.

Pay Rate: $13/h

Responsibilities:

Claims Management – Outpatient and Inpatient Medical Claims

• Understand and examine the provisions of medical policies to determine the patient’s/member’s level of medical coverage against the terms and conditions of the policy
• Provide accurate and efficient assessment of medical claims, validation, pre-authorisation of applications and LOG issuance
• Ensure evidence and claims information are documented and maintained in accordance to company compliance policies and SLA
• Work with the management team to share claim trends, analyse and interpret data in relation to medical claims and identify areas of improvement in the current medical claims cycle and SOPs
• Contribute to ad hoc projects, initiatives, and other activities such as new developments of Medical Claims solutions and processes

Requirements:

• Able to commit minimum 3 months period, 5 days a week (Mon to Fri)
• Able to commit to either fixed morning and/or fixed afternoon shifts
• Experience of claims process for medical claims, preferable in a Third-Party Administrator/Managed Healthcare environment is ideal
• Good Organisational skills and exceptional eye for details
• Good communication skills and stakeholder management skills

KEY DUTIES & RESPONSIBILITIES

Sourcing and Vendor Management:

• Identify potential vendors and suppliers for M&E equipments (eg, Transformers, Cables, Switchgears, Electrical Panels, Lightings, circuit-breakers, etc).
• Evaluate supplier capabilities, product quality, and pricing.
• Negotiate contracts and establish favourable terms.
• Creation of new vendors.
• Perform Due Diligence checks on major/preferred vendors

Purchase Order Processing:

• Administer purchase requisition, quote and issuance of purchase orders.
• Monitor order status and ensure timely delivery.
• Coordinate with project teams to align procurement needs.
• Maintain internal policies and procedures to ensure compliance

Quality Assurance:

• Inspect and evaluate the quality of purchased M&E equipments.
• Resolve any shortcomings or discrepancies promptly.

Supplier Relations:

• Maintain positive relationships with existing suppliers.
• Address any issues or concerns related to deliveries, quality, or pricing.

Cost Optimization:

• Work closely with the Cost Management and BD teams to optimize costs without compromising quality.
• Explore cost-saving opportunities through bulk purchases or alternative suppliers.

JOB REQUIREMENTS

• Education: Min Diploma in Supply Chain Management, Business, or related field.
• Experience: Min 5 years in procurement within M&E / Construction sector.
• Strong negotiation skills.
• Attention to detail
• Familiarity with M&E equipments and industry standards.
• Excellent communication and teamwork abilities.

As a Junior Financial Associate, you will play a pivotal role in supporting the financial operations and strategic initiatives of Smartfunding. You will work closely with the Senior Financial Analyst and the Fatfish Group Corporate Ventures Team, contributing to the management and execution of corporate transactions. This position offers a unique opportunity to gain hands-on experience in financial analysis, market research, and business planning within a dynamic and innovative corporate environment.

Key Responsibilities:

Corporate Representation

• Act as a Company Representative of Smartfunding Pte Ltd, supporting the Senior Financial Analyst in daily functions.
• Collaborate with the Singapore HQ corporate team to ensure seamless communication and coordination.

Support for Corporate Transactions

• Assist in the management and execution of corporate transactions for the Group.
• Provide analytical support for mergers, acquisitions, and other strategic initiatives.
• Prepare reports and presentations for Group Management to facilitate decision-making.

Job Requirements:

• Education: Bachelor’s degree in Finance, Accounting, Economics, or a related field.
• Experience: Entry-level position; prior internship or experience in financial analysis or related field is a plus.
• Skills: Strong analytical skills, multi-tasking, and excellent communication abilities.
• Attributes: Detail-oriented, proactive, and able to work effectively in a team environment.
• Software Proficiency: Familiarity with Microsoft Office Suite (Excel, PowerPoint, Word).

This role is ideal for a motivated individual looking to develop their financial analysis and corporate finance career within a supportive and growth-oriented company.

Organisation Context

The Airspace Mobility Solutions (AMS) business, part of the Global Business Unit Land and Air Systems, is providing leading edge Air Traffic Management (ATM), Unmanned Traffic Management (UTM), Security and Digital Aviation solutions for the Commercial and Defence sectors.

The AMS business manages 11% of the world’s airspace and with revenues of over 500 million Euros worldwide, is the global market leader in airspace management solutions. In Singapore, the business focus is the delivery and support of two key ATM solutions including TopSKY-ATC(HE) and LORADS-III.

This role will initially support the TopSKY-ATC(HE) product line.

Role Description

The Engineering Delivery Management (EDM) role is focused on technical management of all engineering activities. They provide direction, guidance, expert advice, mentoring, support, audit, and workflow management (tasking prioritisation and resource coordination) in support of achieving project objectives and milestones in accordance with the approved schedule. The EDM will manage a multi-skilled team of system, software, integration, V&V and infrastructure engineers to provide on time delivery of services and support for systems and/or sub-systems of products, or for projects, across multiple platforms.

Responsibilities

· Provide direction, expert advice, mentoring, and workflow management (including task prioritisation and resource coordination) in support of achieving project objectives and milestones

· Lead a multi-skilled team of engineers to deliver software engineering solutions, aligning team capability to meet customer expectations

· Lead technical reviews, workshops, peer reviews and project reviews as appropriate for the program

· Prepare and lead the monthly TFR and support the WPPR

• Communicate, analyse, plan and report as necessary to align team capability and customer expectations

· Identify / Review risks, and proposing effective solutions; executing mitigation actions and reporting on outcomes / cost savings and residual risks

· Define and tailor the software engineering environment and the process, practices and tools applicable to the project

· Provide guidance to technical teams with regard to engineering matters aligned to the agreed architecture, to ensure effectiveness whilst meeting customer requirements

· Ensure the timely delivery of software releases in support of the integration and test program

· Promote knowledge sharing and ensuring that work is captured sufficiently for re-use across projects

• Provide support to bids, produce/review Engineering Cost estimates for any modification proposals to the functional baseline
• Provide support during the analysis of Customers requirements to propose and negotiate win–win solution responses with Customers based in Australia and worldwide
• Ensure clear communications (written and verbal) with external customers
• Manage customer scope iaw approved baseline/schedule
• Manage customer expectations

· Deliver iaw Thales processes and practises and contribute to their improvement

Knowledge, Skills & Experience

Qualifications

· Degree in Engineering, Computer Science, IT or other relevant qualification

Essential Experience

· Solid experience of managing the development of real time distributed complex software centric solutions in a safety critical environment

· Solid experience in total life cycle of complex software development, including processes and responsibilities at each stage in the cycle

· Solid knowledge and experience in Systems Engineering lifecycle (eg. EIA632, ISO/IEC15288)

· Advanced analytical and problem-solving skills, with the ability to engage a wide range of stakeholders across a complex environment

· Solid eperience of leading and mentoring team of multi-skilled engineering team, fostering a collaborative and productive work environment

· Solid experience in upskilling and training new engineers

· Experience in managing software development projects using Agile methodologies and the ability to drive iterative development processes

· Strong experience of using Earned Value Management, Work Package Control and reporting, with exposure to scheduling tools (MS Project, Primavera etc.)

· Financial / budgetary management of engineering work packages or tasks

· Strong ability to communicate effectively with various stakeholders, including Project, Engineering Delivery Managers, Product Owners, Technical Design Authorities, Speciality engineers and the engineering team under management.

· Collaboration tools including Jira, Confluence etc.

Desirable:

· Air Traffic Management domain expertise (inc. standards such as ICAO, Eurocontrol, AIDC)

· Experience in product delivery using agile methodologies like Lean methods (including PDCA, Kanban, Value-Stream Mapping); prior experience working Agile @ Scale framework is a bonus

· Programming/Scripting Languages; Java, C++, Ada, Python, Bash

· Experience working in a Linux/Unix development environment

General / Special Requirements

GENERAL

· Assist in ensuring a harmonious work environment in all departments that you are working with by upholding Thales' key values.

· An advocate for continuous improvement and knowledge sharing

· An advocate for diversity and inclusion who will be actively involved in implementing change initiatives to achieve our diversity goals

· An advocate for a culture of continuous improvement

· An advocate for Accountability, transparency and curiosity

· Comply with all relevant company Occupational Health, Safety and Environmental policies and framework and work practices with the intent of preventing or minimising accidental exposures to self, colleagues, visitors and/or the environment and to ensure a safe work practises at all times.

· Comply with all relevant Company policies and procedures.

SPECIAL REQUIREMENTS

· Occasional international travel may be required

Job Title: Project Engineer (ID3411)
Location: Kaki Bukit
Working Hours: Mon-Fri 8:30am – 5:30pm
Salary: $3000-$4500

JOB RESPONSIBILITIES
1) Assist Project manager in overseeing the construction activities and progress, planning, implementation and monitoring work schedules in accordance to the master and details work programmed.
2) Provide guidance to supervisor in relation to building works, ensure work progress according to schedule and site inspection are carried out on time.
3) Organized resources and work out the allocation of tasks to work teams and sub-contractors
4) Assist the PM with on and off site meetings pertaining to technical issues.

REQUIREMENTS
1) Diploma / Degree in relevant Building / Mechanical Engineering
2) Minimum 2 years working experience in construction M & E or ACMV Projects.
3) Remuneration will commensurate with qualifications and experience
4) Possess Driving license and Own Vehicle (Car Allowance provide)

Prepare invoice and key in data and report monthly sales and expenses.

- GST reporting

- Reminder of invoicing payment.

- knowledge in accounting software lile Autocount.

- Staff payroll and prepare payment.

- able to handle CPF, IRAS, MOM website matters.

- Singaporean or PR may apply.

- able to start soon

- oversee account assistant work.

- oversee all companies account work.

PreSchool Teachers (English & Chinese)

Responsibilities

· Plan, supervise and deliver the program in accordance with the policies, guidelines, frameworks and philosophy of MindChamps

· Prepare and implement programmes and age-appropriate teaching aids

· Keep accurate records of the children’s progress and address the children’s educational and developmental needs individually

· Complete the progress reports of the children for each semester and prepare developmental portfolio for every child

· Communicate with parents via the Parents’App at least once a week, weekly team newsletters and conferences

· Meet the parents to address any concerns

· Use positive discipline techniques at all times

· Guide and supervise the Assistant Teacher in the classroom

· Render basic daily routine cares, first aid as and when necessary

· Responsible for the upkeep of teaching resources, arrangement, appearance, decorations and learning environment of the classroom

· Be familiarised with all working curriculum documents, handbooks and policy manuals

Requirements

· Diploma in Early Childhood Care & Education–Teaching (DECCE-T)

· Creative and inspiring with loving energy

· Excellent communication and classroom management skills

· Knowledge in educational development

Additional Information

· Permanent positions

· Attractive remuneration and benefits package

· Comprehensive training will be provided

· Ample opportunities for personal growth and career development

· Location: Pasir Panjang Road

Summarized Purpose:

• Provides support to investigator sites, monitors, department, business unit or function through communication of information, training sites and documentation of services pertaining to clinical trials. Supports the overall performance, education and training of the sites on a study level to ensure the execution of protocols are completed accurately and on time. Uses the tools provided to answer all questions, takes orders and ensure clean data at the earliest point in time.

Essential Functions:

• Acts as the point of contact for sites, ensuring that questions, material orders and request for information are responded and documented in an accurate and timely manner. Ensures that the sites are properly trained in aspects of the protocol (following the study flow sheet) relating to the department. Provides guidance on pre-analytical aspects of the study to ensure smooth flow of data to and from the site.
• Triages calls where necessary to appropriate individual/departments and follow through to resolution.
• Resolves queries so that efficient and timely sample analysis is undertaken by the laboratory so report turn around time is met. Continually reviews exceptions to resolve so that the data is cleaned within the agreed timelines.
• Notifies the sites and all necessary contacts via telephone/fax of all relevant critical/voice alert values/ study specific requirements.
• Places all calls to the sites delivering sponsor alert, voice alert values (VAV) and any other critical values. Answers incoming phone calls, resolves different types of exceptions within assigned timelines.
• Monitors and escalates site issues through the appropriate departments/people e.g. project management to resolve and report as soon as possible. Ensures that all site issues are communicated and followed up to resolution, primarily to site and monitor. Reviews site performance metrics to educate where needed or to report back to monitor or sponsor. Informs site of the results or reasoning not to proceed.
• Follows the specifications and scope of work to evaluate requests for any additional test(s) (test performed in protocol) to be added to a sample. Evaluates the request for out of protocol testing following Scope of work for study. Facilitates requests to the appropriate person.
• Coordinates and resolves issues with samples at time of scanning to have the samples in the database and reported as soon as possible.

Job Qualification

Education and Experience: 
High / Secondary school diploma or equivalent and relevant formal academic / vocational qualification

Knowledge, Skills and Abilities:

• Mandate to be fluent in Japanese and English langaugese (Speaking, Reading, Writing)
• Accurate data entry skills with intermediate computer skills including Microsoft Office
• Strong analytical, interpersonal and time management skills
• Strong client and phone service skills
• Excellent verbal communications and customer service skills
• Critical thinking and problem solving skills to support quality decision making
• Good written and oral communication skills
• Ability to work in a collaborative team environment

Training will be provided. No prior work experience needed.

Culina is a leading purveyor of specialist epicurean foods and wines, a choice distributor to hotels, restaurants and cafes in Singapore. Culina runs a Bistro and Gourmet boutique, an Organic retail store, SuperNature in Dempsey, as well as a chain of butcheries in major supermarkets island-wide.

SuperNature (organic supermarket) located in Dempsey Hill is hiring Café Manager to provide efficient services to customers.

Responsibilities:

• To handle customers’ enquiries and complaints
• To be responsible for stock positioning, shelf life and the monitoring of stock levels (food display, beverages, perishables& non-inventory items)
• To manage write-offs, stock damage and discrepancies
• To coordinate monthly and yearly stock take with the Operations Manager
• To conduct stock investigation upon request by Operations Manager or HQ
• To achieve the monthly sales target given by Operations Manager
• To maintain proper accountability for cash registers, prepare daily earnings for banking
• Plan staff’s duty roster and assign duties to staff / deploy staff where necessary
• Conduct daily or weekly meetings and briefings and send daily sales reports
• To supervise sales staff and the day-to-day operations of the store
• Assist in hiring and interview of FOH staffs
• To conduct cafe floor orientation and basic product knowledge training to new staff
• To provide training new staffs with customer services, operations and housekeeping training
• To assist the Chef in training the FOH staff on the menu
• To liaise with the office on various operational matters such as marketing, accounts, and administrative matters
• Manage the shop in the absence of the Operations Manager
• To undertake ad-hoc duties as assigned by Operations Manager

Requirements:

• GCE ‘O’ level, Diploma or equivalent
• At least 2-3 years of experience in relevant field
• Possess excellent communications skills
• Efficient and can work well under pressure and tight deadlines
• Able to work weekends and public holidays (44 hours per week)

Job Highlights:

• Progressive Leave Scheme
• Fast-Paced, Passionate and Energetic Work Culture
• Group Medical & Hospitalization Insurance
• Flexi Wellness Plan
• Staff Card Discount Program

Company Overview:We are an innovative startup specializing in nanoencapsulation technology for applications in personal care, fragrance, pest control, and other high-growth industries. Our mission is to transform actives delivery systems through cutting-edge sustainable nanoencapsulation solutions, enhancing efficacy and user experience. We are seeking a entrepreneurial technical co-founder to lead our technology strategy and product development, ensuring we remain at the forefront of this exciting and rapidly evolving field.

Position Overview:As technical co-founder, you will play a critical leadership role, shaping and executing the company’s technical vision. You will be responsible for planning and managing the development and implementation of our nanoencapsulation platform, overseeing R&D, and aligning technical objectives with business goals. The ideal candidate has an entrepreneurial spirit and will have a strong background in nanotechnology, materials science, or chemical engineering, with proven experience in product development and scaling technology in a startup environment.

Key Responsibilities:

• Develop and implement the company’s technology strategy, ensuring alignment with business objectives.
• Lead the research and development of innovative nanoencapsulation solutions for various applications (personal care, pest control, pharmaceuticals, etc.)
• Oversee the design, testing, and optimization of encapsulation processes, focusing on enhancing product performance and cost-efficiency.
• Manage the technical team, fostering a culture of innovation, collaboration, and continuous improvement.
• Monitor industry trends, competitor technology, and emerging scientific advancements to maintain competitive advantage.
• Ensure compliance with regulatory and quality standards for product safety and efficacy.
• Guide IP strategy and manage patents related to the company's technological innovations.
• Assist in fundraising efforts by communicating the technical vision and milestones to investors and stakeholders.

Qualifications:

• Master’s or PhD in Nanotechnology, Materials Science, Chemical Engineering, or a related field.
• Keen to join as co-founding team of a startup
• 5+ years of experience in a senior technical leadership role, preferably in a startup or fast-paced innovation-driven environment.
• Proven experience in nanoencapsulation or related fields (e.g., drug delivery, personal care, advanced materials).
• Strong understanding of R&D processes, product development lifecycles, and commercialization pathways.
• Demonstrated ability to translate complex technical concepts into practical business solutions.
• Excellent leadership, communication, and strategic thinking skills.

Benefits:

• Competitive salary and equity options.
• Flexible work environment.
• Opportunity to lead cutting-edge projects in a high-impact, growth-focused startup.

Job Description

Responsibilities:

• Communicate with clients
• Handle general administrative tasks such as filing, phone calls and e-mails
• Handle other administrative or miscellaneous tasks if required

Requirements:

• Minimum Diploma
• Minimum 1 year administrative work experience
• Proficient in MS Word and Excel
• Able to work independently
• Meticulous, motivated, proactive, multi-tasking
• Responsible and willing to learn
• Good communication and interpersonal skills

Work Schedule:

• Weekday / Weekend : 830 am to 615 pm
• Full time: 5 day work week - at least 1 week end

Position is open to candidates interested in full-time , or part time full day - at least 3-4 full-day shifts

Only shortlisted candidates will be notified.

Responsibilities

. Report to Academic Head (Higher Education)

· Prepare and develop teaching and learning materials according to module descriptor

· Develop lesson plan and create assessment brief

· Complete marking of all assessment papers and to moderate academic results

· Conduct lesson to be delivered face-to-face

· Adopt the use of Information Technology tools to enhance learning by students

· Regular feedback to Academic Head regarding students’ academic performance and behaviour

Requirements:

· Possess Master’s or Doctorate Degrees in Education

· With at least 5 years of relevant working or teaching experience in education field

· Possess strong interpersonal and communications skills, passionate in sharing knowledge and interacting with students

· Strong sense of professionalism and commitment in completing assigned tasks efficiently and in a timely manner

Responsibilities:

• Evaluate tenders/cost, manage contracts and advise project team in contractual matters.
• Liaise and establish rapport with consultants, quantity surveyors, architects, developers and contractors on certification of claims for payment.
• Measurement, valuation, negotiation and agreement with the Contractor/Sub-Contractor of all variations to the Contract.
• Monthly progress claim and payment certification.
• Preferably at least 2-3 years QS experience.

Requirements:

• Diploma/Degree in Building/Quantity Surveying from recognised universities or Polytechnics.
• AutoCAD knowledge.

Responsibilities

. Report to Academic Head (Higher Education)

· Prepare and develop teaching and learning materials according to module descriptor

· Develop lesson plan and create assessment brief

· Complete marking of all assessment papers and to moderate academic results

· Conduct lesson to be delivered face-to-face

· Adopt the use of Information Technology tools to enhance learning by students

· Regular feedback to Academic Head regarding students’ academic performance and behaviour

Requirements:

· Possess Master’s or Doctorate Degrees in IT, Computing, Data Science and AI

· With at least 5 years of relevant working or teaching experience in data science field

· Possess strong interpersonal and communications skills, passionate in sharing knowledge and interacting with students

· Strong sense of professionalism and commitment in completing assigned tasks efficiently and in a timely manner

Who We Are

As Singapore's first institute for lifelong learning, the Singapore University of Social Sciences (SUSS) champions inclusivity to bring education to all and ensure that they are given equal opportunities to develop to their fullest potential in our diverse learning environment.

We advocate for the same for our people. We believe everyone should have equal opportunities and develop to their fullest potential in their careers.

Embark on an exciting lifelong journey with us in making a positive difference in your career and serving our society.

For more information on Singapore University of Social Sciences, please visit www.suss.edu.sg.

About The Role

To work with Student Admissions (SA) Manager to manage matters pertaining to admissions of students, challenge examination (CEX) waiver, credit recognition, student admission systems and IT projects.

What You Will Be Doing

• To assist the SA Manager to develop and maintain an effective system for the planning of all administrative operations within the department.
• To assist the SA Manager to structure and maintain the department so as to facilitate effective performance by department staff through optimum delegation and clearly established individual responsibilities and objectives.
• To ensure department staff perform their work effectively towards meeting the established objectives.
• To assess and monitor work in progress and assess work performance of staff towards meeting the established objectives.
• To manage the application and admission process, including processing of applications, course offers, and appeals for programmes.
• To manage the process of verifying applicants’ academic data with MOE, local polytechnics and autonomous universities.
• To manage the acceptance of offer process for all selected applicants.
• To manage the course fee payment of new students.
• To monitor accurate and up-to-date statistics on admissions.
• To prepare management reports on student admissions data and analysis on admission trend.
• To assist in preparation of any adhoc statistics request by internal or external stakeholders.
• To assist in the review of policies and procedures pertaining to student admissions.
• To develop and maintain an effective and efficient system for application and admission, CEX waiver and credit recognition.
• To review admission systems regularly to incorporate new policies and requirements.
• To liaise with Campus IT Services department on all admissions and related system enhancements and IT projects.
• To assist with University-wide activities as necessary or assigned (e.g. graduation, invigilation, orientation, open house, etc.)
• To assist with other tasks, duties as necessary or assigned

Job Requirements

• Proficient with Microsoft Office.
• A good team player with good interpersonal and communication skills.
• Pleasant disposition with good customer service skills.
• Mature, meticulous and possess a high level of discretion and integrity.
• Bilingual with good command of written and spoken English and Chinese will be an advantage as incumbent will be required to communication with international students from China.
• Self-motivated, positive attitude, able to work independently and take initiative.
• Resourceful, and able to multi-task in a fast-paced environment.
• Enjoys meeting people and organising activities.
• Some supervisory working experience would be favourable
• An eye for detail

What We Offer

At SUSS, we advocate the Spirit of Learning and pride ourselves as lifelong learners. You will gain access to various learning platforms and plenty of development opportunities to support your growth in a meaningful career!

Besides that, you will also get:

• Competitive Pay Package
• Hybrid Work Arrangement (Subject to Job Role)
• Medical Benefits
• Flex Benefits
• Family Care Leaves
• Volunteer Service Leaves
• Wellness & Recreation Activities
• Lifelong Learning Opportunities
• Career Development Opportunities through Internal Job Postings and Transfers

Duties and Responsibilities

 Undertake menu planning

 Oversee and participate in the preparation and cooking and serving of main meals, snacks,

cakes, etc. in accordance with specified menus.

 Determine quantities to be cooked and size of portions to be served, taking into account

diets to meet medical, ethnic and personal needs.

 Check quantity and quality of stock received and notify suppliers of deficiencies.

 Oversee washing and cleaning of floors, crockery, utensils, work surfaces and other

kitchens equipment to ensure that the necessary hygiene and health and safety standards are

maintained in the kitchen and dining room as appropriate.

 Ensure that the appropriate clothing, including head wear, is worn at all times in accordance

with the health guidelines.

 Co-operate fully with the statutory inspections and implement recommendation as

appropriate.

 Supervise other the Kitchen Staff Team on shift and undertake performance appraisal

 To undertake such other duties as may be assigned from time to time.

One of the oldest nurseries in Singapore, Prince’s has 50 years’ experience in the industry. Started out humbly as a flower shop, Prince’s has evolved into a full-fledged landscape design and installation specialist. At the international front, our global connections ensure that Prince’s meets the needs of our customers. Strategic alliances with Europe, Australasia, and Asia have been a boon to our service-oriented culture.

Role Duties:

• Take off quality and pricing of tender and prepare quotations to clients.
• Sourcing, purchasing, and managing of suppliers of materials and related products needed for tendersand production.
• Submit requirements on tender submission as per client deadlines, initiate any request forinformation should there be any items to clarify prior to submitting quotation.
• Compare sub-contractors and supplier pricing for tenders and awarded projects.
• Prepare PO for awards of supplier and subcontractors.
• Study and evaluate contracts from clients to ensure that all items stated as part of work are included in the submitted bill of quantities.
• Facilitate contract signing with sub-contractors, verifying that scope of work is clearly defined andmanage subcontractors claims and payment.
• Manage progress claim, progress payment and VO claims for awarded projects.
• Verify As-Build drawings against actual completed work prior to submission to client.
• Need to perform close coordination with main contractors, sub-contractors, suppliers, and otherparties involved in the projects.
• Need to perform liaison with engineers, sales, quality surveyors and project managers.

Candidate profile:

• Diploma or Degree in Engineering (Civil) or related fields
• Strong interpersonal and communication skills
• Basic to Intermediate Skill in Autocad

We regret to inform only shortlisted candidates will be contacted. Thank you for your interest to join the Prince’s family.

NetVirta is a fast growing, venture-backed startup in the fashion fit technology space. If you’ve had difficulty shopping online because you couldn’t find clothing or footwear that fit, you’ve experienced the problem we address. It’s an issue that troubles shoppers around the world and NetVirta is uniquely positioned to solve it.

Founded by two MIT graduates and located in Boston and Singapore, NetVirta is the world’s leading fit technology provider for medical, retail and sports equipment brands, helping customers order the right size with precision 3D body scanning. We began serving the medical industry in 2013, helping doctors scan medical patients to create custom-fit orthotics and prosthetics. In 2017, we expanded to enable NFL and NCAA football players to obtain custom-fit helmets. Fast forward to 2022, NetVirta’s closed deals with multiple clothing and footwear brands in North America, Europe, and Asia.

We are proud to be certified as Great Place to Work® in Singapore.

What can you expect?

We are seeking a Machine Learning Engineer / Researcher who will assist the development and deployment of advanced machine learning models to power our recommendation system and search engine. In this role, you will have opportunities to work with state-of-the-art AI techniques, including large language and vision models, integrating them to complement our recommendation system and search architecture. You will also play a vital role in maintaining and evolving our AI systems throughout the different growth stages.

Responsibilities

• Build scalable recommendation and search engines tailored to fashion content.
• Lead the design, development, and optimization of machine learning models, especially in the context of fashion recommendation systems and search engines.
• Integrate various techniques to help tackle cold start problems, including

1. Content-based recommendation
2. Leveraging implicit user interaction signals
3. Large language (vision) models

Required Skills & Experience

• Bachelor’s, Master’s or PhD degree in Machine Learning, Computer Science, or a related field.
• Experience with Python and machine learning frameworks (eg., TensorFlow, PyTorch).
• Prior hands-on experience with recommendation & search systems and knowledge of its key components (retrieval, re-ranking, cold-start, etc).
• Familiarity with using large language models and computer vision techniques.
• Ability to collaborate in a fast-paced, cross-functional environment with strong communication and teamwork skills.

Good-To-Have

• Knowledge of reinforcement learning (e.g. multi-armed bandits and related techniques).
• Prior industry experience with A/B tests in the context of recommendation systems.
• Good understanding of the infrastructure behind large-scale recommendation and search systems.

What else is awaiting you?

• Career development opportunities, like mentoring, career exploration through a Japanese concept called Ikigai.
• Learning is fundamental to our culture, your growth together with Netvirta's are paramount to how we can transform the industry.
• Besides hard work, we value your well-being and want you to have fun too! Attractive compensation and benefits as well as engagement and welfare activities awaits you.
• Work alongside with friendly colleagues in a positive environment.

About NSING:

As part of Nations Technologies Group, NSING was founded in 2018 in Singapore bringing high-performance semiconductor products and solutions to global semiconductor industry. Our products includes General and Secure MCU, Secure IC for TPM (Trusted Platform Module), Bluetooth Low Energy BLE and BMS (Battery Management System). When you join NSING, you will be part of a talented team in the Singapore R&D Center where we develop high performance MCU targeting for Industrial and Edge AI applications.

Your Role:
As an Embedded Software Engineer, you will contribute to the development of application test software, device drivers and customer reference software. You will be working in various aspects of the SoC development in FPGA prototyping, post silicon validation and customer reference applications.

• As the team manager you will lead the engineers to effectively fulfil the embedded software team charter and provides both technical and personal development guidance to the team members.
• Work closely with SoC Design and Verification engineers to develop a comprehensive and complimentary validation test plan.
• Participate in SoC design reviews to have in-depth understanding of the chip.
• Participate in PCB design review to provide requirements from software perspectives.
• Develop Hardware Abstract layer drivers for in-house testing as well as production ready SDK for customers.
• Validate new and existing hardware IP on FPGA prototype and actual silicon.
• Validate system level performance and test for robustness of SoC.
• Working with Product and Application team to develop software for the customer reference design in areas such as motor controls, Human Machine Interface (GPU), Edge Machine Learning applications.

Your Skills and Experiences:

• Bachelors or Master's degree in Electrical Engineering, Computer Engineering, or a related field.
• Minimum of 5 years as a team leader / Manager.
• Minimum 5 years in firmware development in ARM-based MCU products.
• Minimum 2 years’ experience in the Semiconductor industry or equivalent technical knowledge/experience in electronics circuit design.
• Understanding of ARM architecture, heterogeneous multicore system, and communication interfaces such as USB, Ethernet, CAN, Bluetooth, SPI, I2C, UART, SDMMC will have an added advantage.
• Understanding of DVP, Graphics accelerator and machine learning models deployment.
• Worked with RTOS, device drivers, filesystems, HAL, security, and Software development cycle.
• Proficient in programming language of C, C++, and assemble language.
• Proven experience in common firmware development tools and lab tools, such as IDE (KEIL, IAR, GCC), Debugger (ULink, JLink), Lab equipment (Oscilloscopes, Programmable power supplies, Logic Analyzers etc.).
• Good with Electrical interface, schematic, electronic component specification and datasheet.

Other Skills:

• Strong analytical and problem-solving skills, with a keen attention to detail.
• Excellent communication and teamwork skills, with the ability to collaborate effectively in a cross-functional environment.
• Flexibility and adaptability and demonstrates ability to manage multiple tasks and projects, prioritizing effectively to meet deadlines.

Position Overview

Join our Growth Marketing Innovation and Lifecycle (ILM) Team, a dynamic group spearheading data-led engagements across the full customer lifecycle. Our team activates innovative in-product experiences and capabilities, alongside marketing activities across Autodesk owned touchpoints that improve acquisition, conversion, adoption, and renewal rates.

You will be reporting to the Senior Manager, Lifecycle Marketing. This is an exciting opportunity for a customer experience strategist: you will combine your problem-solving flair with your pragmatic capability to deliver customer experiences that scale.

Responsibilities

Strategy & Activation

• Take on project ownership for targeted Lifecycle Marketing experiences and activate campaign designs that meet measurable objectives for that persona and Lifecycle stage
• Understand qualitative and quantitative customer data from multiple sources, to elaborate on experiment hypotheses that can be tested through new targeted digital experiences

Ownership

• Manage digital post-purchase projects, as tactical lead and project manager, for cross-team experience deployments, in collaboration with regional & global cross-functional stakeholders, identifying opportunities and implementing improvements along the way
• Examine existing experiences' effectiveness against core metrics, suggest A/B tests, to drive improved impact on engagement and renewal rate
• Partner closely with data, engineering, and ops teams to complete detailed design for each experience, problem solving at the cutting edge of new marketing technology to drive their development

Measurement & Reporting

• Analyse campaign performance and customer data to identify trends and inform future opportunities
• Turn insights into go-to-market initiatives, through orchestrated digital experiences, email campaigns or experiments
• Prepare insightful reports and presentations to communicate results to stakeholders and senior leaders across the globe

Minimum Qualifications

• 6 to 8 years of marketing experience (preferably in B2B, SaaS company), with a demonstrated track record in increasing customer lifecycle KPIs
• Demonstrated experience working with APJ, EMEA and global stakeholders - Marketing managers, Operations specialists, Data experts, Customer Success, Product owners, and others
• Able to provide clear direction to engineering and analyst teams on specific targeting and insight needs to formulate testable hypotheses
• Good understanding of SaaS post-purchase metrics and experience designing experiences based on customer behavioural and product usage insights
• Hands on experience setting up campaigns in Marketing and Customer Success systems (Customer Data Platforms, Journey Orchestration, Marketing Automation, Analytics, etc.)
• Ownership mindset and ability to work with minimal direction to achieve goals and project manage from inception to delivery across a large stakeholder group
• Strong communication skills with the ability to translate complex data into clear, concise and compelling manner to a variety of stakeholder

Job Description

Responsible for the execution of civil design involving the preparation of calculations and review of civil design drawings in accordance to customer specifications, applicable codes, standards and other generally accepted practices in the design of industrial plants such as petrochemical and oil refineries.

Duties & Responsibilities:

• To lead the Engineer team to carry out civil and structural engineering jobs in front end engineering design, detail engineering design.
• To assist discipline Manager in project civil portion manpower.
• To generate project specifications, design philosophy, calculation template to comply with clients’ requirement and local authority’s requirements.
• Civil project team manhour control, schedule control.
• To prepare foundation, structural or hydraulic calculation sheets, from simple to more complicated items, in accordance to project specifications, criteria and information. Ensuring correct and accurate calculations of loads and member sizes of structures. On average, a Civil Engineer II produces three simple foundation calculation designs a day or 1 structural calculation report a week.
• To prepare three-dimensional (3D) models and design drawings for structures and foundations as well as shop fabrication drawings.
• To supply design drawing information and instructions to Designers ensuring technical completeness and clearness of data for effective workflow.
• Usually prepares anchor bolt list and setting bolt list for client’s procurement purposes ensuring at least (+)/(-) 10% safety factor and meeting client requirements.
• Checks own design outputs and reviews design drawings to ensure accuracy and completeness to design requirements and concepts.
• May act as Assistant Key Person for small projects or NIDC projects.
• Coordinates with other Engineers and Designers to facilitate production of civil design and drawing outputs.
• Performs other functions that may be assigned by the Department Manager.

Requirements:

• Bachelor’s degree in Civil Engineering.
• Minimum of ten (10) years in the field of years plant engineering design and construction experience in Oil & Gas, Refinery, Petrochemical, Chemical, Pharmaceutical and industrial plants and consistent career experience in the engineering department

Skill Requirements:

• Ability to use computer equipment and peripherals to carry out routine computing tasks.
• Basic knowledge on STAAD, AutoCad and Micro station.
• Possess good communication and technical skills
• Strong leadership qualities and analytical and reasoning abilities.
• Ability to read, analyzes, and interprets common technical information, contract reports and instructions.

Organisation Context

The Airspace Mobility Solutions (AMS) business, part of the Global Business Unit Land and Air Systems, is providing leading edge Air Traffic Management (ATM), Unmanned Traffic Management (UTM), Security and Digital Aviation solutions for the Commercial and Defence sectors.

The AMS business manages 11% of the world’s airspace and with revenues of over 500 million Euros worldwide, is the global market leader in airspace management solutions. In Singapore, the business focus is the delivery and support of two key ATM solutions including TopSKY-ATC(HE) and LORADS-III.

This role will initially support the TopSKY-ATC (HE) product.

Role Description

In this role you will work in an international multidisciplinary team focused on the Verification and Validation of the TopSKY HE product in order to confirm compliance to requirements and the fitness for purpose in accordance with Operational Scenarios. You will be responsible for the design and execution of the procedures and scenarios.

Responsibilities

• Verification of the solution to confirm the system’s compliance to the Functional Baseline requirements
• Validation of the solution to confirm the system’s fitness for purpose in accordance with the Operational Concepts.
• Contribute in System Requirement Analysis activities to confirm requirements are testable and allocate a Verification Method(s) and Verification Phase(s), documented in the Verification Cross Reference Matrix (VCRM).
• Proactively participate in PI planning and backlog refinement including contributing to the effort estimation
• Conduct of the verification and validation tests in accordance with the Project Plan(s) and Project Schedule at the program’s relevant location (Thales ’premises, supplier premises and/or customer premises)
• Conduct of verification and validation tests during formal testing activities Acceptance Verification and Validation (AV&V) with the Customer.
• Communicate with both internal and external stakeholders for the V&V testing activities.
• Participate in System Requirement Analysis workshops, internally, with suppliers and with the Customer.
• Participate in Test Procedure Reviews and Test Readiness Reviews, internally, with suppliers and with the Customer.
• Report regularly on the progress of the testing activity against the agreed planning and budget
• Record the test results in the project Test Management System and any defects in the Defect Management System.
• Contribute to the Defect CCB by providing summary defect status and impact assessments
• Track and verify and validate defect corrections including regression testing.
• Maintain and retest test procedures as requirements are changed
• Produce Test Procedure Books and Test Reports.

· Support your Squad members (software, integration and verification)

· Support the Product Owner (PO) and Scrum Master (SM)

o Make recommendations on strategies to improve performance or productivity

o Identify risks, and proposing effective solution early and executing mitigation actions

o Provide input into the planning and coordination of program integration activities

• Contribute to the development of Policies, Processes and Procedures for the V&V activities best practice
• Leading Technical Working groups both internally and externally to define technical solutions
• Mentoring and support to all personnel involved in V&V activities, and contribute to succession plans for key V&V roles.
• Contribute to the development of V&V Engineering estimates for any modification proposals to the baseline in the context of projects/bids
• Work in accordance with the defined Thales processes and practices, and contribute to their improvement.

Knowledge, Skills & Experience

Qualifications

• Degree in Engineering, Computer Science or related discipline

Essential Experience

· Test Engineering / Test Analyst experience of large, complex, real time software based systems (5+ years)

· Experience in Air Traffic Management Verification and Validation Scenario design and execution

· ATM experience in the following areas:

o Airspace

o Coordination

o ATM HMI

o Interpartition

o Adaptation/Configuration

· Experience with Air Traffic Management standards eg. ICAO, Eurocontrol, AID

· Application of domain knowledge to high value complex design, development and integration projects.

· Proven experience in conducting objective reviews of verification and validation artefacts

· Proven problem identification and analysis skills and system requirements analysis skills

· Experience in working in a multi-disciplinary integrated team environment

· A positive attitude combined with excellent interpersonal and motivational skills.

· Sound judgement and independent decision-making capability where necessary

· Excellent written and oral communication skills in English

Desirable:

· Experience in Air Traffic Management Operations

· Experience in System Engineering tools eg. DOORs, Jira

· Experience in Verification and Validation Tools eg. Vivaldi, Jira

· Experience in working in a Scaled Agile Framework (SAFe)

· International Software Testing Qualification Board (ISTQB)

· Advanced Test Analyst CTAL-TA Certification

· French Literacy

General / Special Requirements

· Assist in ensuring a harmonious work environment in all departments that you are working with by upholding Thales' key values.

· An advocate for diversity and inclusion who will be actively involved in implementing change initiatives to achieve our diversity goals

· An advocate for a culture of continuous improvement

· An advocate for Accountability, transparency and curiosity

· Comply with all relevant company Occupational Health, Safety and Environmental policies and framework and work practices with the intent of preventing or minimising accidental exposures to self, colleagues, visitors and/or the environment and to ensure a safe work practises at all times.

· Comply with all relevant Company policies and procedures.

SPECIAL REQUIREMENTS

· Occasional international travel may be required

Job Title: Cleaner ID9020
Location: Tuas
Working Hours:
Monday to Friday: 8am-5:15pm
Salary: $1800

Benefit:
*AWS with 7 days AL

Job Description:
•Clean, stock and supply designated facility areas (dusting, sweeping, mopping, restroom cleaning etc)

Requirement:
•NA