Job Description

• Lead and prepare tender estimation. Prepare/check quantity taking-off, summarize quantities for each job sequence.

• Source suppliers & sub-contractors. Evaluate quotations. Ensure contractual compliance of tender submission.

• Perform full spectrum of contracts administration including quotation, costing, tenders and contract documentation.

• Work closely with and participate in project meetings with the project manager, finance team and other departments to coordinate the project budget and financial objectives.

• Pre-contract works including studying tender documents and drawings.

• Negotiate terms & conditions for contracts with the Clients, sub-contractors, etc.

• Prepare project cashflow.

• Monitor project expenditures to ensure that they are within the approved budget.

• Draft contracts/ agreements.

• Handle all disputes arises on issues related to contracts from clients / consultants / sub-cons/ partners.

• Manage the resources, budget and staffing of the Department of Construction of the Ministry of Commerce. Supervise the financial planning and monitoring of public works projects.

• Participate in the drafting of the project contract, ensure that the contract terms comply with the requirements of laws and regulations, and clarify the rights and obligations of both parties, especially the key terms such as the scope of the project, quality standards, construction period, payment method and liability for breach of contract.

• Track all project expenses, including labor, materials, and administrative expenses, provide real-time data on project costs, and prepare and update budget reports to keep project managers and stakeholders informed of financial status.

• Support the project team on planning, scheduling and co-ordination of various projects; monitor project progress, cost and cashflow.

• Negotiate for contractual variation, settlement of claims, progress payments and finalizing project accounts.

• Act as the primary point of contact for budget related inquiries and issues within the project team.

• Educate project team members on the importance of budget agreements, expense reporting, and budget compliance to foster team responsibility.

• Other duties as assigned by the management.

Job Requirements:

• Candidate must possess at least a Bachelor's Degree in Civil/Structural Engineering, Building/ Quantity Surveying.

• At least 4 years of working experience in the Construction Site

• Able to work in a team and support the tender manager/project manager in contract administration and cost control.

• On site-experience Marine, Wind Power Project is preferred

• Ensure high levels of customer satisfaction through excellent sales service
• Maintain outstanding store condition and visual merchandising standards
• Maintain a fully stocked store
• Ascertain customers’ needs and wants
• Recommend and display items that match customer needs
• Welcome and greet customers
• Manage point-of-sale processes
• Actively involve in the receiving of new shipments
• Keep up to date with product information
• Accurately describe product features and benefits
• Follow all companies policies and procedures

Job description

Manager, Global Industrialization to lead our international industrialization initiatives in a hands-on role. This role involves the following:

• strategic planning and execution of manufacturing processes
• enhancing production capabilities
• integrating cutting-edge technologies
• troubleshooting across our global facilities
• Performs continuous research, review, testing, and implementation of manufacturing technology advancements
• Interface within execution value-stream to lean processes and to enable workflow of current and new products and processes

Duties & Responsibilities:

• Support all efforts related to safety and international safety standards as applicable.
• Develop strategy with the VP of Manufacturing Technology and implement a comprehensive industrialization strategy that aligns with the company’s long-term business goals.
• Oversee the standardization of production processes to ensure efficiency, quality, and compliance across all locations.
• Collaborate with R&D, engineering, and manufacturing teams to facilitate the transition of new products from prototype to full-scale production.
• Manage global projects, ensuring they are delivered on time, within budget, and meet the required specifications.
• Foster relationships with key stakeholders, including suppliers, local government entities, and internal teams to streamline operations.
• Lead continuous improvement initiatives that enhance productivity and reduce costs while maintaining product quality.
• Monitor industry trends and technological advancements to keep the company at the forefront of innovation.
• Ensure compliance with international manufacturing standards and environmental regulations.
• Collaborate with a diverse global team, providing leadership and professional growth opportunities.

External Key Interactions:

• Industrial Suppliers & Vendors
• Manufacturing systems vendors
• Technical institutions & Research institutions

Desired Qualifications:

• Bachelor’s degree in Engineering, Business Administration, or related field
• At least 3 years of experience in industrialization or manufacturing management, with a proven track record in a global setting.
• Strong project management skills and experience leading cross-functional teams and collaborating with local teams effectively.
• Excellent communication, negotiation, and interpersonal skills.
• Proficiency in data analysis and performance metrics.
• Ability to travel or live internationally as required.

Knowledge-Skills-Abilities (Competencies):

• Able to take strategic direction from the VP of Manufacturing Technology and translate the strategy into results
• Ability to plan, direct and manage employees to meet organization objectives
• Able to work on own initiative
• Able to prioritize work as and when needed
• Good team player
• Willing to learn and improve technical capabilities
• Pragmatic and proactive
• Good analytical skills
• Solution-oriented attitude
• Great troubleshooter and problem solver
• Service minded
• Thorough working knowledge of all facets of manufacturing processes and industrialization
• Strong knowledge of budget preparation and cost control

Travel and Other Requirements:

• Up to 30% overall, at times heavier or lighter dependent on project schedules.
• Ability to live abroad when required based on global project needs.
• Frequent evening and/or early morning calls to collaborate globally.

Project-based Architectural Design Consultancy Services:

• Conceptualize concept and schematic designs.
• Carry out feasibility studies and presents design proposals.
• Design development that would include detailed drawings and specifications for contractors to follow for construction purposes.
• Assist in tendering and bidding processes and inspect the on-going construction to ensure that the project is built according to design plans.
• Liaise with and discuss project-relevant issues with clients.
• Negotiate with contractors on design requirements and building progress.
• Oversee progress of on-site work; ensure project is built according to design plans and resolve any issues that may arise.
• Work with engineers and surveyors to make sure that the building plans meet the necessary building standards.
• Project and/or design management of more than 3 - 4 projects at any given time.

Research-related Work:

• Assist in carrying out practice-based research into specific issues and challenges surrounding the built environment, with the aim of gaining greater insight into these issues and developing design strategies and solutions in response to them.
• Work with Director (Design and Research) to enhance public/industry awareness of the firm’s design philosophies, capabilities, and accomplishments (directly and indirectly) through design, writing, teaching, and research work.

Requirements:

• Minimum Bachelor Degree in Architecture or equivalent.
• At least 5 years of working experience in the related field.
• Able to work well with a team and take the lead at the working level.
• Able to guide younger staff in design matters.
• Possess good design and graphic communication skills, especially in the concept design, schematic design and design development stages.
• Positive attitude
• Some experience with tender documentation and construction stages.
• Software skills: Rhino, Grasshopper, Adobe Photoshop, Illustrator and Indesign. Revit and computational skills will be a plus.
• Willing to take on new challenges.

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team.

Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

We are seeking an experienced Senior QC Chemist to join our quality control team on a 1-year contract. The ideal candidate will have a minimum of 6 years of experience in quality control within the pharmaceutical or biopharmaceutical industry. This role requires advanced expertise in analytical methods, strong problem-solving skills, and an ability to work independently while collaborating closely with cross-functional teams.

Key Responsibilities

• Analytical Testing: Perform analytical testing on raw materials, in-process materials, and finished products in line with established protocols and cGMP standards. Utilize advanced techniques such as HPLC, GC, UV-Vis, and FTIR to ensure product quality.
• Data Review and Reporting: Analyze test results, compile comprehensive reports, and ensure accurate documentation of data in compliance with regulatory requirements. Conduct peer reviews of laboratory results generated by junior chemists.
• Troubleshooting and Process Improvement: Identify and troubleshoot analytical challenges and equipment issues, implementing corrective actions where necessary. Participate in continuous improvement initiatives to enhance testing processes and efficiencies.
• Compliance and Audit Preparation: Ensure adherence to SOPs, GLP, and cGMP regulations. Support internal and external audits by preparing documentation and providing subject matter expertise in QC processes.
• Method Development and Validation: Lead efforts in developing and validating analytical methods as required, ensuring they meet industry standards and regulatory guidelines.
• Training and Mentorship: Provide guidance and training to junior QC Chemists, promoting best practices in quality control and laboratory safety.

Requirements

• Education: Bachelor’s degree in Chemistry, Biochemistry, or a related field. A master’s degree is a plus.
• Experience: Minimum of 6 years in a QC role within a regulated environment, preferably in the pharmaceutical or biopharmaceutical industry.
• Technical Skills: Proficiency in advanced analytical techniques and experience with laboratory information management systems (LIMS).
• Regulatory Knowledge: Strong understanding of regulatory standards, including cGMP, GLP, and ICH guidelines.
• Attention to Detail: High level of accuracy and attention to detail, with strong organizational and documentation skills.
• Contract Duration: 1 year (with possibility of extension based on project needs and performance)

Job Description

1. Maintain, monitor the implementation & update of relevant audit programs
2. Provide technical advice & support various departments
3. Conduct compliance inspections in production floor & warehouse, identifying key areas for improvements and advice corrective actions
4. Perform QA inspections for incoming/outgoing cargoes based on compliance requirements
5. Coordinate with suppliers to resolve non-conformances
6. Provide in-house training on compliance etc for various departments

Job Requirement

• Diploma in Food Science/Food Technology or related disciplines
• Strong knowledge in food safety, well verse in GMP/GWP
• Strong analytical & problem solving skills
• Excellent interpersonal & communication skills

Daily cleaning activities in assigned areas of the building

• Sweeping, Mopping, Vaccuum, Washing
• Ad hoc cleaning assigned

Administrative Duties:

• Manage the director's calendar, including scheduling appointments and coordinating meetings.
• Provide comprehensive administrative and secretarial support, including preparing and editing correspondence, reports, and presentations.
• Develop and maintain efficient office systems, including document management and filing.
• Arrange travel and accommodations for the director and other team members as needed.
• Organize and securely store correspondence, documents, and computer-based information.
• Proactively handle and follow up on assigned tasks to ensure timely and accurate completion.
• Handle confidential information with professionalism and discretion.
• Adapt to a fast-paced work environment and manage multiple tasks effectively.

Business Development Duties:

• Conduct market research and analyse data to identify market trends, conditions, and opportunities for business growth.
• Work closely with management to develop and implement business development strategies.
• Engage in marketing and business development activities, including maintaining relationships with existing clients and securing new business opportunities.
• Assist with project management, ensuring successful execution and alignment with business goals.

Requirements:

• Diploma/Degree or Certificate in Private Secretarial Studies or a related field.
• Minimum of 2 years of relevant experience in an administrative or personal assistant role.
• Highly efficient, self-motivated, and able to take initiative.
• Excellent verbal and written English communication skills.
• Strong organizational and interpersonal skills.
• Resourceful and result-oriented with the ability to handle multiple tasks.
• Flexible and adaptable, with the ability to work independently or as part of a team.
• Skilled in relationship building, able to liaise effectively with all levels of management and staff.

Job Description

• Develop, update, prepare 3D model and shop drawings for submission to the clients and construction using BIM software.
• Ensure models and/or drawings produced to comply with applicable design codes/standards and specifications.
• Design and detailing of systems.
• Attendance for design and construction reviews.
• Provide onsite support for all matters relating to the BIM models with actual construction progress.
• Develop mechanical/ electrical/ ICA systems and designs, coordinate building services layouts,and manage drawing registers and standards

Requirements

• Preferably with a minimum of 3 years relevant working experience in related field.
• Proficient in Bentley OpenBuildings Designer/OpenPlant Modeller/OpenPlant P&ID will be an advantage.
• Able to work independently with minimum supervision.
• Able to perform tasks accurately and reliably with excellent attention to detail.
• Degree/Diploma holder in Mechanical/ Chemical/ Civil/ Architecture/ Electrical/ Electronics/ Instrumentation Engineering.
• Able to communicate in English and Mandarin

Key Responsibilities:

• Manage full accounts cycle, including bank reconciliation and journal entries.
• Ensure accurate data entry in for all transactions.
• Prepare financial data for entry into the financial system
• Keep accounting records and bank statements
• Ensure timely, accurate month-end and year-end closing
• Prepare and file GST returns
• Preparation of tax computation and tax planning
• Filling tax returns on time and updating the management about new changes in rules and regulations.
• Liaise and coordinate with external auditors and tax agents;
• Ensure accounting deadlines are met;
• Review subsidiary accounts
• Other ad hoc duties

Job Requirement

• Diploma in Accountancy or equivalent.
• Minimum 2 years of relevant accounting experience.
• Have prior experience in handling full set of accounts and statutory reporting
• Independent to fulfil tasks and a team player to perform tasks in the company workflow

Job Advertisement: Engineer – Join Our Dynamic Building Consultancy Team!

Are you an engineer looking to deepen your expertise in a unique, multi-disciplinary environment? Join our team at [Company Name], where technical excellence meets a collaborative, supportive culture. Since 2004, we have pioneered in delivering innovative, post-construction diagnostics, repair advisory, and management solutions. Our work bridges technical consultancy with real-world applications, including NDT diagnostics, infrared thermography, and drone technology, supported by ISO9001 and BizSafe Level 3 certifications.

What We Offer:

• A Culture of Learning and Growth: Our engineers work alongside experts across diverse specialties, gaining exposure to advanced techniques and industry best practices. Regular training, mentorship, and continuous upskilling are at the core of our values.

• Multi-Disciplinary Work: Collaborate on projects that integrate diagnostics, advisory, and project management. Engage with cutting-edge technologies like infrared scanning and drone operations, while learning to adapt and solve real-world challenges.

• Impactful Projects: Be part of projects with significant impact, from detailed inspections to advisory services that guide critical decisions in building maintenance and restoration.

The Ideal Candidate:

• Holds an engineering degree or diploma with an interest in building diagnostics and NDT.
• Is proactive, detail-oriented, and open to working in a team that values both independence and collaboration.
• Eager to grow within a supportive environment that values technical expertise and innovative thinking.

If you’re ready to make a real impact and grow your engineering career in a supportive, forward-thinking consultancy, we’d love to hear from you!

• Degree in Mechanical/Electrical Engineering
• Minimum 2 years’ experience in engineering manufacturing industry
• MUST be proficient in using AUTOCAD software – Solidworks
• Proficient in Microsoft office
• Good interpersonal skills, problem-solving and project management skills
• Supervision of construction works and co-ordinate with client’s representation, consultants and sub-contractors on technical issues
• Prepare detailed M&E drawings, shop drawings, and As-built drawing
• Study production & machine requirements
• Assures product quality by designing electrical testing methods; testing finished products and system capabilities
• Evaluates electrical systems, products, components, and applications by designing, applying knowledge of electricity and materials
• Technical documentation and reporting

Element has an opportunity for a Business Development Manager. In this role you will be responsible for conversion of more complex requests for quotes (RFQ’s) to high quality bids and quotations. You will establish and maintain a strong relationship with clients throughout the sales cycle: proactively following up on leads for future business opportunities, being responsible for following up and converting more complex RFQs to high quality quotations per customer expectations and making detailed testing proposals.

The Business Development Manager must be able to articulate Element testing to both business and technical users. They must be able to identify all technical requirements of assigned accounts to assure quotations are complete and professional. In addition to client relations, this role will interact with the Element Sales Team, General Manager, and lab personnel. The ideal candidate will be customer focused, action oriented, approachable and patience.

Job Duties:

• Conduct customer visits and follow-up with the entire selling process of identifying customers through sales leads, cold calls, etc and ensure customers's satisfaction with our product and services
• Develop and establish sales strategies for targeted customer to generate revenue and expand market share
• Develop and maintain strong business relationship with new and existing customers
• Deliver technical presentation, handle and lead all the quotation, sales enquiry and project tenders as well as conduct market research and needs analysis for market competition and competitive
• Lead the marketing activities to promote company reputation and services to all industries and prepare monthly report for management to develop sales plan and forecast

Job Requirements:

• Degree in Mechanical Engineering with minimum 5 years of relevant working experience in energy industry
• Experience in testing inspection certification or related field would be an advantageous
• Possess good analytical and processing skill
• A team player who is meticulous and able to work independently
• Outgoing personality with strong interpersonal and communication skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Job Description:

1. Preparation of design calculation sheets, design & construction drawings, and any other
related documentation
2. Receive approvals from relevant Authorities and/or Employers
3. Prepare concrete design calculations such as bridges, drainage culverts, and retaining
walls
4. Prepare steel structural design calculations such as steel bridges, and temporary sheet
piles
5. Prepare settlement/consolidation calculations
6. Prepare slope stability calculations
7. Prepare construction planning & management for the works such as reclamation,
dredging, soil improvement, soil investigation, ground compaction, piling, steel
fabrication, and concrete, etc.

Job Requirements:
1. Bachelor of Engineering in Civil/Geotechnical Engineering
2. Design experience such as piling foundation, drainage, Earth Retaining Stabilizing
Structure (ERSS), soil improvement design (PVD, DCM, sand pile, gravel pile), ECM, Gravity wall, FEM, Slope stability
3. Familiar with the latest design standards such as Eurocode, British standards, ACI, ASCE, PIANC, CIRIA etc.
4. Well-versed in software e.g. Auto CAD, Microsoft Word, Excel, Power Point, Geoslope, PLAXIS etc.
5. Contract duration of 3 years
6. 5.5 days' workweek
7. Project site located at Woodlands

Job Profile:

Reporting directly to the Warehouse Supervisor, the incumbent shall be involved in the day-to-day activities of the warehouse operations:

• Assist the team to achieve timely collection and delivery of goods to clients.
• Assist in daily activities (receiving, releasing, picking and packing).
• Assist in documentation (commercial invoice, packing list and delivery order).
• Maintain cleanliness of warehouse.

Job Specification:

• Possesses a GCE ‘N’ Levels/ITE qualification.
• Minimum 1 to 2 years relevant experience in warehousing environment.
• Basic communication and computer literacy.
• Responsible, possess initiative and independent.
• Ability to work under pressure and meet tight deadlines, where necessary.
• Preferably Singapore Citizens and PRs, due to work pass restrictions.

Interested candidates are invited to apply directly to [email protected]. Applications not submitted via the proper email channel, shall not be entertained. We regret that only shortlisted candidates will be notified.

Accounts Operations

1. Accounts Payable (AP) Activities

2. Verify vendors’ invoices

3. Convert to bill/ AP entry

4. Assist in AP Payment Proposal

5. Cheque issuance/ update Giro payment

6. Maintain and update accounting records (postings/data entries)

7. Perform AP reconciliation

8. Checking Statement of Accounts

9. Vendor Registration

10. Term Contract billing activities

11. Backup for buddy’s duties (e.g. billing activities, incoming receipt update)

Reports/ Schedules & Others

1. Monthly Bank Reconciliation

2. Prepayment Schedule & journal posting

3. Fixed Asset Registered & Journal Posting

4. Assist in Audit Schedules

5. BCA Performance Assessment Update, Upgrading & Renewal

6. Assist in Month End Closing

7. Assist in Project Closure process

Office Administration (Covering duties, when required)

1. Perform reception duties and attend to incoming calls, visitors

2. Handle incoming & outgoing mails, email enquiries & fax

3. Assume any other suitable duties as and when assigned by the Company

Requirements:

1. Diploma in Accountancy or equivalent

2. At least 3 years of relevant working experience

3. Proficient in MS Office Applications

4. Meticulous and proactive

5. Well-organised and comfortable with figures

We regret that only shortlisted candidates will be notified.

Description:

• Manage incoming and outgoing mails
• Answering incoming calls
• File and retrieve of documents, records and reports
• Adhoc admin duties as per assigned by superior

Requirements :

• Min GCE “N”/’O’ level or equivalent
• Relevant 1-2 years relevant working experience
• Able to work independently without much guidance
• Full of initiative, committed, meticulous, fast learner
• Computer literate in MS office, outlook

• *** ( WORKING DAY : MONDAY TO THURSDAY 9-5pm ONLY) ***
• CONTRACT FROM ( MID NOVEMBER 2024 TO END MARCH 2025 )

• Weekly consumable ordering with PO issued, update and monitor PO status and follow-up on timely delivery.
• Verify and follow up with Machine repair request with PO issued
• Verify Training, HR, recruitment, SSC cost and follow by PO issuing
• Carry out Goods Received Note (GRN) in the SAP system for goods received/services rendered by suppliers/contractors by end of the month.
• Prepare for monthly Consumable and machine repair cost report - FS, RB and Commercial
• Sourcing for the new product /service vendor based on the request
• Support the purchase of HQ office supplies.
• Other administrative tasks assigned by your reporting manager.

Responsibilities

HR Responsibilities:

• Support the development and implementation of HR initiatives and systems
• Maintain day to day timesheet, employee attendance data, and process payroll, CPF submission on time
• Maintain employee records (attendance, EEO data etc.) according to policy and legal requirements
• Create and implement effective onboarding plans, Primary care plan, medical insurance, Security Bonds, Work injury compensation, Public Liability.
• Schedule and arrange employees to attend Safety course, General Trade, Confined space courses on time and update the details to our shipyard database.
• Apply work passes and prepare documents related to work passes.
• Day to Day need to liaise with shipyard HR and our customers for Seamless operations
• Be actively involved in recruitment by preparing job descriptions, posting ads and managing the hiring process
• Assist in performance management processes
• Support the management of disciplinary and grievance issues
• Review employment and working conditions to ensure legal compliance
• Submit MOM survey on time
• Handle Workers dormitory related jobs.( Check in, check out, routine Hygiene inspection, renewal)
• Book company lorries service appointments, maintain vehicle service record , insurance, road tax, vehicle inspection due, monitor and control Fuel expenses.

Account Responsibilities:

· Maintain proper documents filing and entry in our infotech Accounting Software (Our customer Invoice, Supplier/Subcontractors invoice, bills, DO filing and bookkeeping)

· Customer/Supplier/Subcontractor’s SOA preparation and monitoring overdue

· Send SOA to customers and Payment chasing

· Send RFQ to multiple suppliers/Subcontractors and get quotation and issue purchase orders

· Preparing GST documents and submit to Auditor on time

· Preparing annual accounts, P&L, Balance sheet and submit to auditors on time

Requirements and skills

• Must have bachelor’s degree
• Must be proficient in MS Office
• Excellent communication and interpersonal skills
• Self-initiative, Problem-solving and decision-making aptitude
• INFOTECH HRMS, INFOTECH ACCOUNTING software hands on experience is added advantage
• Proven experience as HR officer, administrator, Accounting
• Knowledge of HR functions (pay & benefits, recruitment, training & development etc.)
• Understanding of labour laws and disciplinary procedures
• Outstanding organizational and time-management abilities
• Strong ethics and reliability

- Willing to work under the sun and overtime, weekend or holiday, shift switching and able to work under pressure and condition such as not afraid of dirty, not afraid of tired.

- Willing to work as a Construction worker, can do the timber, rebar job, able to work at project site, structural work.

- Able to operate of machine, can use construction machine, knowledge of construction safety. Experience in operating equipment like trench rammers , drills, pneumatic hammers. Knowledge of mixing and pouring constructin material (concrete, sand, grout & etc...).

- At least 10 years of experience in construction industry. Manage site activities, vendors and sub-contractors，assist the Project Manager in the daily execution of work. Attend meeting, coordination, prepare works schedule & site supervision.

- Ensure installation is carried out as per construction drawings & ensure that works are executed within an acceptable standard of workmanship.

- Responsible for all aspects of site safety, proven experience as construction worker, reduce material wasting and cost saving.

- Knowledge of basic engineering and construction principles and methods, be bilingual, fluent in English & Chinese / Bangladesh.

- Any other assigend duties.

Objectives of this role

• Planning, coordinating and managing all phases of construction projects, including project initiation, planning, execution, monitoring and closeout.
• Establishing project objectives, scope and deliverables in collaboration with stakeholders and ensuring alignment with client requirements.
• Developing and managing project schedules, budgets and resource allocations to ensure cost efficiency and timely delivery.
• Liaising with architects, engineers, contractors and subcontractors to monitor construction progress, resolve issues and ensure compliance with specifications and quality standards.
• Managing procurement processes, including bid evaluations, contract negotiations and vendor selection.
• Oversee project budgeting and cost control and manage change orders to ensure adherence to budgetary constraints.
• Conducting regular site inspections to assess project progress, identify risks, and ensure compliance with safety protocols and regulatory requirements.
• Maintain effective communication with project team members and stakeholders to provide project updates, address concerns and foster strong working relationships.

Your tasks

• Develop comprehensive project plans, including timelines, resource allocations and procurement strategies.
• Coordinate and oversee construction activities, ensuring adherence to project schedules and specifications.
• Evaluate and select contractors and subcontractors based on qualifications, experience and cost-effectiveness.
• Monitor project progress, track key performance indicators (KPIs) and report on project status to stakeholders.
• Ensure compliance with safety regulations and legal requirements, prioritising a safe working environment for all involved.
• Manage construction project documentation, including contracts, permits, drawings and change orders.
• Conduct regular meetings to facilitate communication, address challenges and to meet project objectives.
• Provide regular updates and reports on project status, including milestones, budget updates, and any significant developments or risks.
• Implement and enforce safety protocols and ensure compliance with local building codes and regulations.
• Carry out thorough project evaluations and assessments to identify areas for improvement and implement necessary corrective measures.
• Provide leadership and guidance to the project team, fostering a collaborative and high-performance work environment.

Required skills and qualifications

• A bachelor's degree in civil engineering, construction management, or a related field.
• 3+ years of relevant experience in construction project management, with a track record of successfully delivering projects on time and within budget.
• Strong knowledge of construction methodologies, building codes and safety regulations in the Indian context.
• Excellent project management skills, including effective planning, organising and prioritising tasks.
• Proficiency in reading and interpreting technical documents, including project blueprints and construction schematics.
• Strong leadership and communication skills to manage project teams and stakeholders.
• Proficiency in construction management software, project scheduling tools and cost estimation software.
• Familiarity with sustainable construction practices and green building certifications.

Preferred skills and qualifications

• Relevant professional certification in project management or construction management, like Project Management Professional (PMP) or LEED certification.
• Knowledge of risk management and budget management principles.
• Experience in managing large-scale construction projects in India.
• Knowledge of local construction regulations, permits and approval processes.
• Proficiency in using Building Information Modelling (BIM) software.
• Experience with construction contract negotiations and claims management.
• Familiarity with lean construction principles and methodologies.
• Strong financial understanding and experience in project budgeting and cost control.

Do you thrive in dynamic environments where innovation and transformation are at the heart of everything you do? Are you passionate about reshaping the future of work and using data to drive impactful decisions? If so, we invite you to embark on this exciting journey with us at Commonwealth Capital as our Senior / Assistant Manager (Transformation & Change Management), a role where you will be instrumental in revolutionizing how we grow and develop our workforce.

Role and Responsibilities

• Lead Workforce Transformation: Take charge of redefining the future of work at Commonwealth Capital, implementing strategic initiatives that empower employees and drive lasting change.
• Be a Change Leader: Serve as a champion of change, fostering a culture of innovation and adaptability that positions us for long-term success.
• Data-Driven HR Strategy: Leverage advanced data analytics to create actionable insights, guiding key HR decisions and strategies that optimize workforce efficiency and effectiveness.
• Drive Process Innovation: Streamline HR operations with forward-thinking process improvements, using data and technology to transform the way we work.
• Communicate Change Effectively: Craft and execute strategic communication plans to ensure seamless transformation, keeping all stakeholders informed and engaged.
• Collaborate with Leadership: Work closely with senior leaders to align transformation efforts with broader business objectives, providing strategic insights and recommendations that drive success.
• Champion a Positive Culture: Lead employee engagement initiatives that build a culture of inclusivity, collaboration, and innovation, making Commonwealth Capital a great place to work.

Key Competencies

• An Independent and Innovative Thinker: Able to work autonomously, you are proactive in driving solutions and constantly seek creative approaches to solving complex problems.
• A Visionary with a strong track record in driving workforce transformation and managing change.
• Analytical skills that empower you to translate complex data into impactful strategies and actions.
• A passion for people, combined with the ability to think strategically and execute effectively in a fast-paced environment.
• Outstanding communication skills, with the ability to influence and inspire across all levels of the organization.

Qualifications and Experience

• A degree in Business or equivalent, with at least 4 years of hands-on experience in roles related to transformation, organizational development, or change management.
• A background in Human Resources is desirable.
• Proven track record in transformation projects, including experience in driving process innovation and using data analytics for decision-making.

Job Description & Requirements

1. Conducts field inspection and verify conformance to approved specifications.
2. Conducts inspection on the installation of product such as AHU etc.
3. Prepare and review documents for project close-out requirements.
4. Conducts in-house orientation on company policies and procedures to employees in preparation for their incorporation to company.
5. Supervise the implementation of punch list (balance of works) issued by client to conform to the established client standards and specifications.
6. Prepare QC inspection reports and monthly accomplishment reports.
7. Proper checklist and progress report must be generated.
8. Conducts line checking on installed items, issue punch list and verify accomplishment prior to endorsement for testing.
9. Conducts pre-qualification of welders for pipe welding works.
10. Conducts inspection on installation of fans and blowers including pre-fabrication and initial testing.
11. Prepare inspection reports for accepted and rejected activities.
12. Conducts receiving inspection on critical materials prior to installation.
13. Attend to coordination meetings and address problems concerning installation problems.
14. Generate Non-conformance reports to activities not conforming to project specifications and monitor detailed action plans for close-out.
15. Prepare and maintain quality manual for the organization.
16. Generate work instructions, company procedures for use by the organization and submission to client.
17. Conduct and prepare analysis of generated NCRs, complaints, and audit results.
18. Arrange with third party inspectors for necessary testing.
19. Implement quality system to the project.
20. Arrange materials documentation requirements and submits to Client Inspection Department for acceptance.
21. Prepare Quality Inspection and Test Plan (ITP) for submission to clients.
22. Review Mill Test Certificates. (For Production Related Works only).
23. Setting QA compliance objectives and ensuring that targets are achieved.
24. Maintaining awareness of the business context and company profitability, including budgetary control issues.
25. Assessing the product specifications of the company and its suppliers, and comparing with customer requirements.
26. Working with purchasing staff to establish quality requirements from external suppliers.
27. Considering the application of environmental and health and safety standards.
28. Agreeing standards and establishing clearly defined quality methods for staff to apply.
29. Defining quality procedures in conjunction with operating staff.
30. Setting up and maintaining controls and documentation procedures.
31. Ensuring tests and procedures are properly understood, carried out and evaluated and that product modifications are investigated if necessary.
32. Supervising technical staff in carrying out tests and checks.
33. Bringing together staff of different disciplines and driving the group to plan, formulate and agree comprehensive quality procedures.
34. Persuading reluctant staff to change their way of working to incorporate quality methods.
35. All QC items must be reported to the Operations manager.
36. Establishing standards of service for customers or clients.
37. Establish and define Standards and Procedure of development requirements for the Product.
38. Formulate, implement and review work procedures to ensure effectiveness and efficiency to meet quality requirements.
39. Evaluate according to ISO requirements and actively provide constructive feedback to development team.
40. Establish and maintain high quality test procedures and methods to be used in present and future software and hardware testing and development that comply with the company quality standards and deliverables.
41. Prepare the requirements for components and / or assembled parts of the incoming inspections.
42. Oversee quality tests and qualify the release of products at the manufacturing side.
43. Oversee the resolution of quality-related problems in the development and manufacturing environment resulting from supply or production imperfections.

REQUIREMENT

1. Diploma in Mechanical Engineering related discipline

2. At least 2 years of related work experience in quality control

3. Good office coordination skill and interpersonal skill.

4. Independent and resourceful.

5. Knowledgeable in ISO documents preparation.

Job Description:

• Lead accounting and finance function.
• Responsible for the full spectrum of accounting matters, inclusive of filing XBRL.
• Prepare, review and analyze monthly financial reporting.
• Prepare annual budget, forecast and financial analysis.
• Manage working capital effectively by preparing monthly cash flow projection
• Work with business leaders to prepare annual budget & forecast for board approval.
• Responsible for statutory reporting matters including GST and submission government statistics/surveys/grants.
• Liaise with external auditor, tax agent, company secretary and bankers.
• Provide support to business units to review and analyze on project profitability.
• Involve in continuous process / system improvement activities to improve workflow effectiveness & efficiency.
• Any ad-hoc reporting and projects.

Requirements:

• Tertiary qualification preferably with professional certification in Accounting/ Diploma in Accounting
• Minimum 5 years of relevant experience in the areas of accounting
• Basic understanding of relevant legal aspects for accounting
• Construction company background is an added advantage

Taking off quantity, Timely preparation & submission of Bill of Quantities/ Quotations

Source for suppliers and subcontractors for quotations for tendering

Works order preparation and variation orders

Preparation of progressive reports and claim bills Preparation of final account with clients

Attend site meetings with clients

Prepare Variation Orders, Monthly progress claims to Clients and payments for Subcontractors/Suppliers. Settlement of Final Accounts with Clients and Subcontractors/Suppliers.