- Responsible for assisting the Section Head in overseeing and organizing maintenance activities for trailers, van and lorry within the logistics department ensuring their roadworthiness and compliance with LTA regulations. Also accountable for ensuring an adequate supply of trailers for operational needs across all production centers. Additionally, tasked with conducting thorough verification of all trailer repair costs, preventing any misuse of the repair system by contractors and maintaining a 100% compliance rate for audit purposes.

- Overseeing the maintenance of trailers, prime movers, van and lorry within the department.

- Ensuring the assets are roadworthiness and compliance with LTA regulations.

- Monitors and ensures that all trailers undergo scheduled inspections for the timely renewal of road tax.

- Organizing the daily triannual maintenance schedule for all trailers with our contractors.

- Managing road safety initiatives, implementing departmental rules and regulations including monitoring the effects of these changes.

- Scrutinizing the repair spreadsheet and the before/after photos submitted by contractors for verification.

- Verifying that the repair costs in the invoices submitted by contractors align with the terms specified in the contract agreement.

- Compile and document the daily repair costs for each respective contractor and submit the report to the Head of Department as needed.

- Support the Head of Department in registering trailers, third-party prime movers and NSR trucks within the One Motoring system.

- Perform daily inspections around the mill to identify any faulty trailers and arrange for their prompt repair.

- Ensuring that there is a sufficient supply of trailers for operational requirements across all production centers.

- Promptly address any trailer breakdown during production and swiftly arrange for the immediate deployment of a replacement trailer.

- Conduct physical counts of empty trailers on weekends and public holidays including submitting the corresponding reports three times each day to the management.

- Identifying the necessary action plan and evaluating the issues that arise when accidents occur within the NatSteel pool of drivers.

- Management and verification of asset damages, along with the monitoring of insurance access invoices.

- Serve as a backup prime mover driver to carry out local deliveries within the department in cases of driver shortages.

- Act as an emergency driver for the van during plant visits or as needed for various purposes by management or NatSteel employees.

Salary: up to $2,500 + Overtime Pay + Shift & Transport Allowances $300++
Work Days: 5 Days (10:45pm to 7:30am from Mon to Fri)
Work Location: Boon Lay

Job Duties:
• Perform all production activities at various stages and to work as a team to achieve production targets in accordance with ISO Quality Management System and applicable safety standards.
• Weighing, mixing, filter preparation, filling and packaging.
• Completion of all associated production records in accordance with good documentation practices.
• Transfer of raw and packaging materials as well as finished products.
• Perform house-keeping and first-level trouble-shooting of equipment as needed.
• Equipment and area cleaning on regular intervals.
• Comply with all safety and environmental regulations.
• Work on continuous improvement initiatives within Production.
• Handle non-routine duties as assigned by senior technicians or Production supervisor.

Requirements:
• Min GCE O Level / Nitec in production, preferably in Industrial Engineering
• Min 3 years of related working experience, preferably in chemical process related industry / production factory
• Computer literate (MS Office) and knowledge of Chemistry preferred
• Experience in material handling with forklift or maintenance will be an advantage
• Forklift Licence preferred
• Responsible, reliable and able to work independently as well as a team player

Please submit your resume in MS Word format to [email protected]

Please remember to include your
1) Recent photo
2) Salary information
3) Notice period

UNITED PERSONNEL SERVICES
21 Bukit Batok Crescent
#11-74 WCEGA Tower
Singapore 658065
Tel: +65 6565 1939
www.united-personnel.com

EA Licence Number: 05C5278
Registration No.: R1103477

(All applications will be treated in strictest confidence. We regret that only shortlisted candidates would be notified)

Job Summary:

• Gross Salary: $2,800 to $4,000++

• Working Days: Monday to Friday

• Working Hours: 8.30am to 6.00pm

• Location: Jurong East (walking distance from Jurong East MRT)

• Great career advancement opportunities

• Uncapped commission, incentive trips, and exciting company events!

Responsibilities:

• Actively source for suitable candidates through internal database, applications, referrals, networking, job portals and social media platforms.

• Craft job advertisements effectively and appropriately to attract the right talent.

• Screen and interview candidates through the telephone and face-to-face

• Prepare candidates for interview and follow up closely at every stage of the selection and recruitment process

• Develop an understanding of each role and job requirements before presenting suitable candidates to clients

• Conduct reference checks; manage the interview process and salary negotiation between clients and candidates.

• Perform leads generation and cold-calling to acquire new clients.

• Gather information to understand client companies and their industries in order to better cater to recruitment needs.

Requirements:

• Candidates with no experience may apply as training will be provided

• Candidates must have some basic knowledge of Microsoft Word, Excel, etc.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

• Prepare correspondences, report, invoices, shipping documents;
• Timely processing of orders and preparation of shipping documents;
• Communicate and liaise with Tradenet, Government agencies for approval of all relevant documents and declarations;
• Ensure that all imported and exported products conform to government or government agencies rules and policies;
• Prepare all relevant documents for L/C negotiations with bank;
• Coordination of delivery, shipment and collection of goods with customers, suppliers, forwarders, shipping companies, contractors for stuffing and unstuffing and other departments within the company/group;
• Negotiation of freight charges for all shipments;
• Responsible for translation of material requirements to support customers’ and company’s needs;
• Consistent update of incoming and outgoing goods;
• Organize and maintain shipping correspondence file record.

Responsibilities include:
-Assist in daily operations
-Ensure that the cafe and coffee house is properly maintained and clean
-Oversee food preperations, presentation and storage to ensure food health and safety compliency.
-Regular checks with customers to gather feedbacks
-resolving of conflicts in a professional way

Qualities we seek are:

· Positive attitude and commitment to excellence

· Respective skills in functions to be performed

· Excellent interpersonal and communications skills

· Team work

· Willing to learn and able to work under pressure

· Experience in F&B Operations

· Preferably 3 years of previous experience in serving.

. Must be able to work night shift or split shift

. Must be able to work extra hours or weekend if needed

Job Responsibilities:

• Drive digital transformation and strategy by helping cross functional stakeholders rethink the impact of digital on their business and accelerate their transformation efforts
• Reinvent users experience and leveraging data to create transformative digital interfaces and process innovations.
• Lead the Integration of diverse systems/platforms and processes
• Responsible for the co-ordination of work stream activities across the programs i.e. delivery of the integrated plan and operation of the governance.
• Drive transformation through applications of AI and machine learning tools, developing applications and workflow automations, implement new and improved workflows to streamline project execution and enable live data capture and progress reporting.
• Determine and agree business change and other project resource requirements for the digitalization initiatives
• Constantly stay up to date on new and emerging technology available from suppliers
• Subject Matter expert or go-to-person in digitalization for project delivery
• Provide direction and oversight, create awareness to the new ways of working through developing internal capabilities that support the digitalization initiative.
• Provide coaching and support to project sponsors and people leaders to help educate and build business change management capability within portfolio/function/business
• This role will also be responsible for providing feedback to Group IT to ensure Business-IT alignment on software selection and corporate policies to support project teams in successfully delivering projects and earning the company revenue.

Requirements:

• Prior experience producing deliverables on engineering & construction projects; project management experience, and experience managing the design and maintenance of technical products.
• Minimum 8 years working experience in 2D & 3D Design & Engineering project work
• Minimum 5 yrs experience as Technical Product Owner
• 2 years in Software development
• Established record of driving digital transformation with value creation in mind
• Skill and knowledge with Data design, databases, Web APIs and IT infrastructure

• Delivering a wide variety of items.
• Following delivery driving routes and time schedules
• Loading, unloading, preparing, inspecting and operating the delivery vehicle

• Assist with day to day HR functions and duties
• Handle partial recruitment, i.e. job posting, career fairs, schedule interviews for hiring managers, new hire's on-boarding and exit
• Handle staff on-boarding and off-boarding.
• Prepare all HR documentations (e.g., employment letter, confirmation letter, warning letter, etc.)
• Responsible for the updating and maintenance of the database in the HR system
• Maintain accurate personnel records, attendance records, leave records and general administrative duties including documentation and filing.
• Process work passes applications, renewal and/or cancellations and liaises with Ministry of Manpower for work pass related issues.
• Assist in periodic work/performance review and appraisal exercises
• Handle monthly payroll computation and/or overtime
• Handle expenses reimbursement and daily petty cash claim
• Liaise with clinic for all medical examinations pertaining to employment
• Any other HR & ad hoc admin duties assigned; you may also be expected to take on other functions.

Responsibilities:

• Manage new customer base
• Prospecting sales visits and regular follow-ups
• Develop business relationship, visit and make presentation to potential customer
• Execute a sales plan and report daily activities
• Offer, quotations according to customer requirements
• Pre-sales preparation, negotiation of sales contracts and after-sales service
• Gather market intelligence and identity potential customers
• Design innovative marketing tools for new product lines
• Identify potential market opportunities & prioritize for marketing and sales

Requirements:

• Minimum Diploma in Chemical Process/Field of Study
• Fresh graduates are also welcome
• Aggressive, systematic and analytical mind
• Possess, initiative & good working attitude
• Self-motivated, mature & independent
• Team Player
• Good interpersonal & communication skills

Job Overview:

We are seeking a skilled and licensed plumber to join our team. The ideal candidate will be responsible for installing, repairing, and maintaining plumbing systems for common areas in buildings. The role requires expertise in local authority approved standards, submission and ensuring high-quality workmanship.

Responsibilities:

• Install, repair, and maintain plumbing systems (e.g., pipes, fixtures, fittings) in accordance with codes and safety standards
• Inspect plumbing systems and identify issues
• Submission to authority on work completion
• Adhere to all relevant regulations and safety standards
• Keep accurate records of work performed and materials used

Requirements:

• Valid LP license preferred
• Valid driving license preferred
• Proven experience as a plumber
• Strong problem-solving and troubleshooting skills
• Excellent communication and customer service skills
• Physical ability to perform plumbing tasks and hands-on if necessary
• Attention to detail and adherence to safety protocols

Role Objective:

Perform routine Accounts Payables and all other accounting duties for 4 business units.

Role Responsibilities:

· Perform 3 ways match of AP invoices.

· Accounts allocation for AP invoices.

· Enter AP invoices into Oracle System.

· Processing of payment to vendors.

· Monthly bank reconciliation.

· Update incoming receipts daily in excel receipts listing file.

· Preparation of audit schedules.

· Generate Sonobis Reports.

· Printing, generate and filing of AR Invoices.

· Preparation of inventories reports.

· Month end reporting and related financial tasks.

Role Requirement:

· Basic knowledge of bookkeeping is required.

· Minimum GCE O Level.

· Preferably with LCCI Bookkeeping Certificate.

· Minimum with one year of relevant experience.

• Business development towards Goltens’ range of services includes identifying and developing business strategies through exhausting opportunities in both local & overseas market.
• Perform sales visits and develop new accounts with strategies to increase market shares in Marine, Offshore, Power Generation, Oil & Gas, Petrochemical and Industry.
• Develop and execute all strategic sales plans to support company goals and achieve sales performance target.
• Manage and build relationship with prospects and existing customers.
• Liaise with Operation Personnel for sub-contractor quotations to prepare customer’s inquiries
• Discuss with Operation Personnel for Technical Capability, Manpower and schedule information for quotation purpose
• Establish cost calculations and draft quotations for submission to Sales Personnel/customer
• Liaise with Operation Personnel, Sales Personnel and customers and coordinate for existing on-going projects
• Monitor and handle key customers’ requirements
• Review customers’ purchase orders, terms & conditions, and contract

Job Description

We are looking for a passionate Marketing Admin to be part of the Marketing team. You will be responsible for marketing design initiatives and campaigns for retails brands.

Job Highlights

• Opportunities for Creative Innovation
• Career Development Opportunities
• Fresh Graduates Welcome to Apply

Responsibilities:

• Create and execute marketing campaigns across various channels, such as digital advertising, social media, email marketing, and traditional media.
• Monitor and analyse campaign performance metrics including delivery platforms, adjust strategies as needed, and provide regular reports on marketing activities and results.
• Collaborate with internal teams, including operation, research and development team, to ensure consistent messaging and effective execution of marketing initiatives.
• Manage social media accounts and online presence, engaging with customers, responding to inquiries, and driving user engagement.
• Handling customer feedback and concern on various platforms.
• Identify and evaluate opportunities for partnerships, sponsorships, and collaborations to expand brand reach and enhance brand image.
• Support the development of marketing collateral, including presentations, website content, and promotional materials.
• Support administrative duties from Marketing department.
• Any other work assigned by the manager from time to time.

Requirements

• Diploma in Business Administration, Marketing, Mass Communications, or related fields
• Entry Level Candidates are welcome to apply
• At least 1-2 years of experience in Marketing, A&P, Marketing Communication in the food & beverage industry will be desired
• Creative with an excellent aesthetic sense with a strong communication and presentation skills
• Sensitive to changes in consumer trends and lifestyles
• Willing to work in the West

• Lead the installation and maintenance of Data Center operations, including deploying, troubleshooting, and maintaining UCS servers.
• Oversee the deployment and maintenance of VMware environments, Windows Server 2021 and Linux RHEL 9.0
• Manage common network services such as SNMP, Syslog, DNS, NTP, DHCP, and Active Directory.
• Ensure the seamless integration of network services to support overall system functionality.
• Utilize tools like Wireshark to analyze network performance and provide detailed root cause analysis.
• Offer recommendations, guidance, and expertise to maintain the highest level of system performance.
• Perform complex troubleshooting for both hardware and software issues.
• Conduct backup, archiving, and recovery procedures to safeguard critical data
• Maintain comprehensive documentation for configurations, troubleshooting steps, and best practices.
• Collaborate with the team to develop and implement efficient and standardized processes.

• Extensive experience in Data Center and virtualization technologies (UCS, VMware ESXi, vSphere, vSAN, vCenter, Windows Server, Linux Server).
• Proficient in managing common network services (SNMP, Syslog, DNS, NTP, DHCP, AD).
• Strong analytical skills with the ability to perform network performance analysis using tools like Wireshark.
• Hands-on experience in deploying, troubleshooting, and maintaining UCS Servers.
• Expertise in deploying, troubleshooting, and maintaining VMWare and Windows Server 2016, 2018 and 2021.
• Proven ability to perform complex troubleshooting, backup, archiving, and recovery procedures.
• Excellent communication and collaboration skills.
• Troubleshooting
• Data Center and virtualization
• Network performance analysis

• Aruba Mobility Solution Implementation: Lead the design, configuration, and implementation of Aruba Mobility Conductor and Aruba Mobility Controller solutions to provide reliable and efficient wireless connectivity.
• Network Troubleshoot and Optimization: Continuously assess and optimize the performance of the network, identifying areas for improvement and implementing solutions to enhance overall efficiency.
• Security Implementation: Implement robust security measures within the Aruba Mobility solutions, ensuring the confidentiality and integrity of data transmitted over the network.
• Troubleshooting and Incident Response: Lead troubleshooting efforts during network incidents, providing timely resolution and implementing preventive measures

• 6-8 years working experience in wireless IT Engineering/Operations
• Possesses expert knowledge of wireless Network Infrastructure and Network Design
• Strong understanding of wireless networking protocols, security protocols, and network architecture.
• Experience with network monitoring and management tools
• Excellent Leadership Skills
• Problem-solving mindset with the ability to analyse complex network issues and provide effective solutions.
• Ability to acquire new skills in a diverse environment
• Demonstrates effective interpersonal skills; able to establish good working relationships globally and collaborate with networks of employees of all levels; able to foster cooperation in others; creative problem-solver.
• Excellent communication skills
• High personal integrity, credibility, and energy
• Essential to this position are demonstrated accomplishments in achieving objectives in a global organization together with the ability to work effectively and independently on cross-functional teams
• Must be able to lead and engineer solutions in a stressful environment and react quickly in times of crisis.
• Knowledge of Aruba Wireless Conductor and Wireless Controller, (AP’s)
• Knowledge of Identity Service Engine
• Knowledge of Wireless Protocols
• Demonstrated experience engineering and supporting network solutions 
• Expert knowledge of Aruba Wireless
• Deep understanding and expertise with Network LAN/WAN
• Deep knowledge of Cisco routers/switches
• Deep knowledge of Palo Alto firewalls

Purpose: The role is responsible for handling customer quality issues and continuous improvement activities of the Company products and processes. You are required to drive internal departments on quality-related issues to follow up on effective corrective/preventive actions. You will be liaising with the internal team to support QBR, RMA, IFR, MRB, FAI Review and approval with Supplier and customer, In-Process Audit, FA Launch, 8D, SDR, FPY, tracker processes, and communicate between customer and internal team on Quality related matters.

Key areas of responsibilities:

• Lead and drive customer quality CAB meetings to derive root causes and corrective and preventive actions based on 8D methodology
• Perform ad-hoc visits to customer sites to facilitate investigation and improvement proposal
• Develop, drive, and lead the improvement of manufacturing systems and processes to meet and exceed customer expectations
• Lead and drive company-wide continuous improvement projects with relevant Organizations
• Build and drive customer relationships to improve customer satisfaction
• Perform customer quality performance monitoring and reporting to internal management and customer
• Manage the first article process and submit the report to the customer for approval
• Lead cross-functional team to establish the outgoing inspection checklist for NPI to ensure that the product meets customer requirement
• Analyze customer quality performance to identify trends and improvement opportunities
• Perform manufacturing audit

Qualification & Experiences:

• Degree in Mechanical/Mechatronics/Electrical/Manufacturing Engineering discipline
• At least 5 years of working experience, 3 years in dealing with customer quality managers or direct customer facing, related to the manufacturing environment, preferably from the semiconductor, semiconductor equipment industry, electronics, or high-tech instrument industry
• Strong knowledge and practices in 8D, SPC, FMEA, 6-sigma methodology (Certified Black/Green Belt), and change management
• Good understanding of first-article inspection requirements and expectations
• Excellent leadership and effective communicator with all levels of associates and management
• Experienced in Minitab is an advantage
• Experienced QMS auditor

Job Description:

Be the firmware developer and integrator role.

Firmware development process and integration.

Do troubleshooting and resolve issues quickly.

Effectively communicate with customer and other stakeholders.

Good sense of quality and work towards delivering quality products on time.

Technical Requirement:

C, C++ Programming, RTOS, ThreadX, Linux
Minimum 3 years of experince.

Expert in C and C++ Programming.

Experience in firmware development in Linux environment & RTOS

Experience in firmware with ThreadX or Linux.

Knowledge of Embedded design concepts, processor architectures, ARM Cortex, Memory management.

Good debugging experience and proficient in handling debuggers.

Usage of tools like Jira, Git, Github.

Responsibilities:

• Planning of work schedule and manpower deployment
• Work closely and coordinate with department reps in tracking and monitoring end to end job requirements
• Present monthly reports to management
• Administer of work access permit or required certification or licensing to facilitate job deployment
• Perform worksite visits to certain job requirements and identify any other work challenges
• Perform ongoing evaluation and review of manpower

Requirements:

• N level; ITE Diploma or its equivalent, preferably in logistic or Operations Management
• Strong Problem solving
• Good time management and planning
• Good customer service, analytical, and follow-up skills
• Good organization skills
• Good communication and interpersonal skills
• Proficient in MS Office, especially in Outlook, Words, and Excel
• Willing to do hands-on, operations-oriented
• Strong analytical ability, meticulous, sensitive to numbers and figures
• Able to work independently

Job Description:
Hands-on design, implement, and extend automation tools for infrastructure, application, and container management.

Monitor Staging, Test and Development environments for a myriad of Products in an agile and dynamic organization.

Resolve future needs for capacity and investigate new products and/or features.

Produce update and/or endorse Site Reliability Engineering standards, guidelines, and procedures.

Work closely with the DevOps Architect for implementation and operational support.

Workstation setup and maintenance.

To develop the tools for product development environment.

Ensuring the repeatability, traceability, and transparency of our infrastructure automation.

Technical Requirement:
DevOps, Python, Bash, Jenkins, Git, Docker, Kubernetes

Minimum 4+ years of relevant industry experience.

Experience in programming languages like Python, Bash.

Experience in Server Visualisation and Storage.

Experience in automating SRE tasks.

Experience working with Git and Linux Environment.

Experience in writing Ansible playbooks, Terraform modules.

Experience working with Agile SCRUM Teams.

Basic understanding of network system.

Experience in managing and administrating in at least one CI/CD tools– Jenkins, Git Actions etc.,

Excellent troubleshooting skills with the ability to learn new technologies in complex distributed systems.

Job Description

We are looking for a passionate Assistant Marketing Manager to be part of the Marketing team. You will be responsible for marketing design initiatives and campaigns for retails brands.

Job Highlights

• Opportunities for Creative Innovation
• Career Development Opportunities

RESPONSIBILITIES & EXPECTATIONS

• Responsible for the brand development work of the catering brands.
• Develop marketing strategies and plans, advertising, promotions, creative projects, media relations, sponsorships and event management.
• Develop revenue and profit growth strategies for the business and take charge of the tactical execution of the brands’ marketing communication initiatives in support of the business strategy, market goals, and organizational objectives.
• Leads, coordinates campaigns and communications through all phases of launch and maintenance, including reporting, analysis and optimization.
• Collaborate with internal business partners like Operations, F&B and Finance teams to ensure that all initiatives support the brand promise.
• Develop creative briefs and guide creative direction to meet objectives for all advertising and communications, including print, and digital assets
• Monitor and improve ROI using strategic and analytical approach
• This role requires a strategic and analytical approach to monitoring and improving ROI.
• Prepare and manage budgets for various marketing and branding initiatives to achieve cost efficiencies.
• This is an ideal role for an experienced, organized and detail-oriented marcom professional with a strong background in FMCG/retail environment.
• Any other tasks as and when assigned by immediate superiors

REQUIREMENTS

• Degree / Diploma in Mass Communication / Marketing or related discipline
• Minimum 5 years’ relevant brand management and marketing experience, preferably in the F&B/ FMCG industry
• Meticulous with an eye for detail
• Willing to roll up sleeves and work on the ground to ensure the success of all projects delivery
• Highly creative with experience in creating content and digital campaigns that engage, inform and motivate
• Proactive with a strong sense of accountability and a day-to-day focus on results.

Job Responsibilities:

• Operate company owned prime mover to truck empty or loaded containers
• Ensure daily delivery and collection of containers timely, accurately, with care and safety
  

Job Requirements:

• Class 4/5 driving license preferred
• Familiar with PSA operations
• Preferably with 2 years experience in prime mover driving
• Good safety records with zero traffic demerit points
• Follow Singapore traffic regulations and PSA / Jurong Island / Jurong Port requirementsMaintain and care of vehicle properly
• Follow safety rules and regulations while driving a company's vehicle

• Assist the project manager in planning the project
• Assist the project manager in creating schedule for the construction project
• Support the project manager in hiring contractors and choosing suppliers for the project
• Supervise construction projects to make sure they meet technical specifications
• Ensure that construction projects are completed within planned cost and time
• Keep accurate records of material and labor costs incurred in the construction process
• Monitor the progress of the construction work and performance of subcontractors at the site
• Hold meetings with site workers and subcontractors on behalf of the project manager
• Convey message from the site manager or major stakeholders to contractors and subcontractors
• Convey information about the progress of the project and performance of the contractors to the manager
• Assist the manager in preparing report to be submitted to stakeholders by providing necessary information on the progress of the business
• Represent the project manager in executive and stakeholders’ meetings
• Assist the project manager in the procurement of certain materials
• Assist the project manager in hiring and assigning tasks to laborers
• Assist contractors and Engineers in interpreting technical designs
• Educate site workers on safety procedures to be adopted at the site and make sure that they adhere strictly to safety standards
• Ensure that the construction site is safe and free from any hazardous chemical or objects
• Report accidents that occur at the construction site to the project manager
• Administer or make sure that first aid is administered to any injured construction worker
• Ensure the smooth day to day operation of work activities at the construction site
• Maintain good relationship with site workers, contractors, and suppliers
• Ensure that any change in project plan is executed by contractors
• Motivate all the participants in the project
• Ensure that the project is executed in compliance with local or state regulations
• Identify any potential problem at the site and work to prevent it.

The expert is responsible for assessing the safety and performance of medical device in aspects of software to ensure that manufacturers comply with relevant regulations and standards.

Key Responsibilities:

• Deep understanding of technical documentation requirements for software-enabled medical devices, including but not limited to software specifications, design and architecture documents, risk management files, and software validation plans
• Ensuring that the various phases of the software development lifecycle and the corresponding documentation needs for each phase in software-enabled medical devices are carried out
• Assessing software development life cycle process to align with best practices
• Evaluating risk management files for software-enabled medical devices, including risk analysis, risk evaluation, and risk control measures to ensure appropriate identification, assessment, and mitigation of risks throughout the product lifecycle

Key Requirements:

• Bachelor's or Master's degree in Computer Science, Software Engineering, Biomedical Engineering, or a related field
• At least 2 years of experience in a TIC related industry and/or software testing (this includes the time for the Bachelor, Master or PHD Thesis)
• Any knowledge in relevant standards governing medical devices, especially those related to software, such as IEC 62304, IEC 82304-1, will be preferred
• Any knowledge on Standards and regulations such as ISO 13485, and EU Medical Device Regulation (MDR) will be an advantage
• Strong technical writing abilities to provide clear and concise feedback on the technical documentation and communicate assessment findings effectively
• Excellent communication and interpersonal skills to collaborate effectively with manufacturers and other team members in English language. Ability to articulate assessment findings clearly and professionally
• The ability to work independently and as part of a team and under pressure to meet deadlines and maintain confidentiality

Salary: $2400-$2800+allowances+OT=>$3300

Industry: Engineering

Located at Tuas

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

The position deals primarily with the day-to-day organisation, management and technical issues associated with the instrument and electrical equipment, resource and infrastructure on a 120,000 tonnes per annum continuous petrochemical plant. Heading a small team of maintenance and engineering resource, the successful candidate shall be responsible for troubleshooting, root cause analysis and determining corrective/repair actions for both instrument and electrical equipment in order to maintain production. As appropriate, the role would also undertake responsibilities for the performance and maintenance of the basic plant controls systems of DCS, safety instrumented systems (SIS), fire & gas system (F&G), SCADA, plant information systems.

He / She shall also be involved in long term maintenance, inspection and modification activities, utilising PPM strategies, maintenance cost improvement programs, personnel development and adherence to Statutory/Company/local/International Standards. This role also has supervisory and management responsibilities (administration and leadership) towards the crew of I/E technicians and contractors he oversees.

Responsibilities:

• Responsible for the safe operation and maintenance of electrical & instrument equipment, safety instrumented systems and lead the implementation of SHE programs to meet local and corporate requirements.
• Provide training, guidance and development to I/E technicians and contractors to improve SHE & functional knowledge and performance
• Review plant I/E equipment performance with studies in RCM and RCA, recommend cost effective and long-term corrective actions to address chronic I/E equipment problems to improve plant I/E equipment reliability with reduced maintenance cost
• Provide troubleshooting expertise and organizational skills to resolve instrument and electrical problems as they arise. Work with cross functional teams to resolve plant issues and problems where required.
• Act as PPM owner for I/E aspects of work, period review all I/E PPM on their effectiveness and ensure system is up-to-date, and ensure all I/E on-site PPM work is executed as per planned and in spec
• Periodically review the I/E term contracts with MIV and MEV providers to ensure safety and optimal efficiency of these revenue contracts
• Provide IE expertise and support to the site’s projects and modifications work

Requirements:

• Degree in Instrument or Electrical engineering from a recognized tertiary institution
• Minimum of 5 years of engineering and maintenance experience in the related industry (chemicals preferable)
• Familiar with operations and maintenance of basic plant control systems in DCS, safety instrumented systems, fire & gas alarm system and SCADA system, familiar with Emerson and ABB equipment and systems would be an advantage
• Maintenance and troubleshooting experience with good analytic skills in the I/E field in Chemical Plant
• Good understanding of International and local I/E standards for maintenance, design, installation, inspection and repair
• Possess good understanding SHE knowledge in process, maintenance work, equipment and tool safety
• Good interpersonal and communication skills, interacting effectively with all levels in the organization as well as with contractors